From: Sam Ravnborg <sam@ravnborg.org>
To: Paul Cercueil <paul@crapouillou.net>
Cc: David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
Rob Herring <robh+dt@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
"Rafael J . Wysocki" <rafael@kernel.org>,
devicetree@vger.kernel.org, od@zcrc.me,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: Re: [PATCH 01/12] dt-bindings: display: Convert ingenic,lcd.txt to YAML
Date: Sun, 17 May 2020 08:12:05 +0200 [thread overview]
Message-ID: <20200517061205.GA609600@ravnborg.org> (raw)
In-Reply-To: <20200516215057.392609-1-paul@crapouillou.net>
Hi PAul.
On Sat, May 16, 2020 at 11:50:46PM +0200, Paul Cercueil wrote:
> Convert the ingenic,lcd.txt to a new ingenic,lcd.yaml file.
>
> In the process, the new ingenic,jz4780-lcd compatible string has been
> added.
>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Looks good.
Had to read the minItems/maxItems thing twice to get it,
so I also played a little with the examples, and it worked as expected.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
> ---
>
> Notes:
> This patch comes from a different patchset so it's effectively a V2.
>
> Changes were:
> - lcd_pclk and lcd clocks are in the correct order now,
> - Add 'port' and 'ports' properties, and document the valid ports.
>
> .../bindings/display/ingenic,lcd.txt | 45 -------
> .../bindings/display/ingenic,lcd.yaml | 126 ++++++++++++++++++
> 2 files changed, 126 insertions(+), 45 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/display/ingenic,lcd.txt
> create mode 100644 Documentation/devicetree/bindings/display/ingenic,lcd.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.txt b/Documentation/devicetree/bindings/display/ingenic,lcd.txt
> deleted file mode 100644
> index 01e3261defb6..000000000000
> --- a/Documentation/devicetree/bindings/display/ingenic,lcd.txt
> +++ /dev/null
> @@ -1,45 +0,0 @@
> -Ingenic JZ47xx LCD driver
> -
> -Required properties:
> -- compatible: one of:
> - * ingenic,jz4740-lcd
> - * ingenic,jz4725b-lcd
> - * ingenic,jz4770-lcd
> -- reg: LCD registers location and length
> -- clocks: LCD pixclock and device clock specifiers.
> - The device clock is only required on the JZ4740.
> -- clock-names: "lcd_pclk" and "lcd"
> -- interrupts: Specifies the interrupt line the LCD controller is connected to.
> -
> -Example:
> -
> -panel {
> - compatible = "sharp,ls020b1dd01d";
> -
> - backlight = <&backlight>;
> - power-supply = <&vcc>;
> -
> - port {
> - panel_input: endpoint {
> - remote-endpoint = <&panel_output>;
> - };
> - };
> -};
> -
> -
> -lcd: lcd-controller@13050000 {
> - compatible = "ingenic,jz4725b-lcd";
> - reg = <0x13050000 0x1000>;
> -
> - interrupt-parent = <&intc>;
> - interrupts = <31>;
> -
> - clocks = <&cgu JZ4725B_CLK_LCD>;
> - clock-names = "lcd";
> -
> - port {
> - panel_output: endpoint {
> - remote-endpoint = <&panel_input>;
> - };
> - };
> -};
> diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml
> new file mode 100644
> index 000000000000..d56db1802fad
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml
> @@ -0,0 +1,126 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/ingenic,lcd.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Ingenic SoCs LCD controller devicetree bindings
> +
> +maintainers:
> + - Paul Cercueil <paul@crapouillou.net>
> +
> +properties:
> + $nodename:
> + pattern: "^lcd-controller@[0-9a-f]+$"
> +
> + compatible:
> + enum:
> + - ingenic,jz4740-lcd
> + - ingenic,jz4725b-lcd
> + - ingenic,jz4770-lcd
> + - ingenic,jz4780-lcd
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: Pixel clock
> + - description: Module clock
> + minItems: 1
> +
> + clock-names:
> + items:
> + - const: lcd_pclk
> + - const: lcd
> + minItems: 1
> +
> + port:
> + description: OF graph bindings (specified in bindings/graph.txt).
> +
> + ports:
> + description: OF graph bindings (specified in bindings/graph.txt).
> + type: object
> + properties:
> + port@0:
> + type: object
> + description: DPI output, to interface with TFT panels.
> +
> + port@8:
> + type: object
> + description: Link to the Image Processing Unit (IPU).
> + (See ingenic,ipu.yaml).
> +
> + required:
> + - port@0
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> +
> +if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - ingenic,jz4740-lcd
> + - ingenic,jz4780-lcd
> +then:
> + properties:
> + clocks:
> + minItems: 2
> + clock-names:
> + minItems: 2
> +else:
> + properties:
> + clocks:
> + maxItems: 1
> + clock-names:
> + maxItems: 1
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/jz4740-cgu.h>
> + lcd-controller@13050000 {
> + compatible = "ingenic,jz4740-lcd";
> + reg = <0x13050000 0x1000>;
> +
> + interrupt-parent = <&intc>;
> + interrupts = <30>;
> +
> + clocks = <&cgu JZ4740_CLK_LCD_PCLK>, <&cgu JZ4740_CLK_LCD>;
> + clock-names = "lcd_pclk", "lcd";
> +
> + port {
> + endpoint {
> + remote-endpoint = <&panel_input>;
> + };
> + };
> + };
> +
> + - |
> + #include <dt-bindings/clock/jz4725b-cgu.h>
> + lcd-controller@13050000 {
> + compatible = "ingenic,jz4725b-lcd";
> + reg = <0x13050000 0x1000>;
> +
> + interrupt-parent = <&intc>;
> + interrupts = <31>;
> +
> + clocks = <&cgu JZ4725B_CLK_LCD>;
> + clock-names = "lcd_pclk";
> +
> + port {
> + endpoint {
> + remote-endpoint = <&panel_input>;
> + };
> + };
> + };
> --
> 2.26.2
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-05-17 6:12 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-16 21:50 [PATCH 01/12] dt-bindings: display: Convert ingenic,lcd.txt to YAML Paul Cercueil
2020-05-16 21:50 ` [PATCH 02/12] dt-bindings: display: Add ingenic,ipu.yaml Paul Cercueil
2020-05-17 6:17 ` Sam Ravnborg
2020-05-17 11:06 ` Paul Cercueil
2020-05-16 21:50 ` [PATCH 03/12] component: Support binding with no matches Paul Cercueil
2020-05-16 21:50 ` [PATCH 04/12] gpu/drm: ingenic: Fix bogus crtc_atomic_check callback Paul Cercueil
2020-05-17 6:17 ` Sam Ravnborg
2020-05-17 12:19 ` Paul Cercueil
2020-05-16 21:50 ` [PATCH 05/12] gpu/drm: Ingenic: Fix opaque pointer casted to wrong type Paul Cercueil
2020-05-17 6:21 ` Sam Ravnborg
2020-05-17 12:19 ` Paul Cercueil
2020-05-16 21:50 ` [PATCH 06/12] gpu/drm: Ingenic: Fix incorrect assumption about plane->index Paul Cercueil
2020-05-16 21:50 ` [PATCH 07/12] gpu/drm: ingenic: Set DMA descriptor chain address in probe Paul Cercueil
2020-05-16 21:50 ` [PATCH 08/12] gpu/drm: Ingenic: Move register definitions to ingenic-drm.h Paul Cercueil
2020-05-16 21:50 ` [PATCH 09/12] gpu/drm: Ingenic: Add support for OSD mode Paul Cercueil
2020-05-16 21:50 ` [PATCH 10/12] gpu/drm: Ingenic: Register driver as component master Paul Cercueil
2020-05-16 21:50 ` [PATCH 11/12] gpu/drm: Ingenic: Add support for the IPU Paul Cercueil
2020-05-18 10:48 ` Emil Velikov
2020-05-18 11:26 ` Paul Cercueil
2020-05-19 17:10 ` Paul Boddie
2020-05-16 21:50 ` [PATCH 12/12] gpu/drm: Ingenic: Support multiple panels/bridges Paul Cercueil
2020-05-17 6:12 ` Sam Ravnborg [this message]
2020-05-28 20:17 ` [PATCH 01/12] dt-bindings: display: Convert ingenic,lcd.txt to YAML Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200517061205.GA609600@ravnborg.org \
--to=sam@ravnborg.org \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=od@zcrc.me \
--cc=paul@crapouillou.net \
--cc=rafael@kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).