From: Yan Zhao <yan.y.zhao@intel.com>
To: kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: alex.williamson@redhat.com, cohuck@redhat.com,
zhenyuw@linux.intel.com, zhi.a.wang@intel.com,
kevin.tian@intel.com, shaopeng.he@intel.com, yi.l.liu@intel.com,
xin.zeng@intel.com, hang.yuan@intel.com,
Yan Zhao <yan.y.zhao@intel.com>
Subject: [QEMU RFC PATCH v4] hw/vfio/pci: remap bar region irq
Date: Sun, 17 May 2020 22:56:18 -0400 [thread overview]
Message-ID: <20200518025618.14659-1-yan.y.zhao@intel.com> (raw)
In-Reply-To: <20200518025245.14425-1-yan.y.zhao@intel.com>
Added an irq type VFIO_IRQ_TYPE_REMAP_BAR_REGION to
dynamically query and remap BAR regions.
QEMU decodes the index of the BARs by reading cnt of eventfd.
If bit n is set, the corresponding BAR will be requeried and
its subregions will be remapped according to the its new flags.
rely on [1] "vfio: Add a funtion to return a specific irq capabilities"
[1] https://www.mail-archive.com/qemu-devel@nongnu.org/msg621645.html
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
---
hw/vfio/common.c | 50 ++++++++++++++++++++++++
hw/vfio/pci.c | 90 +++++++++++++++++++++++++++++++++++++++++++
hw/vfio/pci.h | 2 +
include/hw/vfio/vfio-common.h | 2 +
| 11 ++++++
5 files changed, 155 insertions(+)
diff --git a/hw/vfio/common.c b/hw/vfio/common.c
index a041c3b..cf24293 100644
--- a/hw/vfio/common.c
+++ b/hw/vfio/common.c
@@ -1284,6 +1284,56 @@ void vfio_region_unmap(VFIORegion *region)
}
}
+/*
+ * re-query a region's flags,
+ * and update its mmap'd subregions.
+ * It does not support change a region's size.
+ */
+void vfio_region_reset_mmap(VFIODevice *vbasedev, VFIORegion *region, int index)
+{
+ struct vfio_region_info *new;
+
+ if (!region->mem) {
+ return;
+ }
+
+ if (vfio_get_region_info(vbasedev, index, &new)) {
+ goto out;
+ }
+
+ if (region->size != new->size) {
+ error_report("vfio: resetting of region size is not supported");
+ goto out;
+ }
+
+ if (region->flags == new->flags) {
+ goto out;
+ }
+
+ /* ummap old mmap'd subregions, if any */
+ vfio_region_unmap(region);
+ region->nr_mmaps = 0;
+ g_free(region->mmaps);
+ region->mmaps = NULL;
+
+ /* setup new mmap'd subregions*/
+ region->flags = new->flags;
+ if (vbasedev->no_mmap ||
+ !(region->flags & VFIO_REGION_INFO_FLAG_MMAP)) {
+ goto out;
+ }
+
+ if (vfio_setup_region_sparse_mmaps(region, new)) {
+ region->nr_mmaps = 1;
+ region->mmaps = g_new0(VFIOMmap, region->nr_mmaps);
+ region->mmaps[0].offset = 0;
+ region->mmaps[0].size = region->size;
+ }
+ vfio_region_mmap(region);
+out:
+ g_free(new);
+}
+
void vfio_region_exit(VFIORegion *region)
{
int i;
diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index c70f153..12998c5 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -2883,6 +2883,94 @@ static void vfio_unregister_req_notifier(VFIOPCIDevice *vdev)
vdev->req_enabled = false;
}
+static void vfio_remap_bar_notifier_handler(void *opaque)
+{
+ VFIOPCIDevice *vdev = opaque;
+ uint64_t bars;
+ ssize_t ret;
+ int i;
+
+ ret = read(vdev->remap_bar_notifier.rfd, &bars, sizeof(bars));
+ if (ret != sizeof(bars)) {
+ return;
+ }
+ for (i = 0; i < PCI_ROM_SLOT; i++) {
+ VFIORegion *region = &vdev->bars[i].region;
+
+ if (!test_bit(i, &bars)) {
+ continue;
+ }
+
+ vfio_region_reset_mmap(&vdev->vbasedev, region, i);
+ }
+
+ /* write 0 to notify kernel that we're done */
+ bars = 0;
+ write(vdev->remap_bar_notifier.wfd, &bars, sizeof(bars));
+}
+
+static void vfio_register_remap_bar_notifier(VFIOPCIDevice *vdev)
+{
+ int ret;
+ struct vfio_irq_info *irq;
+ Error *err = NULL;
+ int32_t fd;
+
+ ret = vfio_get_dev_irq_info(&vdev->vbasedev,
+ VFIO_IRQ_TYPE_REMAP_BAR_REGION,
+ VFIO_IRQ_SUBTYPE_REMAP_BAR_REGION,
+ &irq);
+ if (ret) {
+ return;
+ }
+ ret = event_notifier_init(&vdev->remap_bar_notifier, 0);
+ if (ret) {
+ error_report("vfio: Failed to init event notifier for remap bar irq");
+ return;
+ }
+
+ fd = event_notifier_get_fd(&vdev->remap_bar_notifier);
+ qemu_set_fd_handler(fd, vfio_remap_bar_notifier_handler, NULL, vdev);
+
+ if (vfio_set_irq_signaling(&vdev->vbasedev, irq->index, 0,
+ VFIO_IRQ_SET_ACTION_TRIGGER, fd, &err)) {
+ error_reportf_err(err, VFIO_MSG_PREFIX, vdev->vbasedev.name);
+ qemu_set_fd_handler(fd, NULL, NULL, vdev);
+ event_notifier_cleanup(&vdev->remap_bar_notifier);
+ } else {
+ vdev->remap_bar_enabled = true;
+ }
+};
+
+static void vfio_unregister_remap_bar_notifier(VFIOPCIDevice *vdev)
+{
+ struct vfio_irq_info *irq;
+ Error *err = NULL;
+ int ret;
+
+ if (!vdev->remap_bar_enabled) {
+ return;
+ }
+
+ ret = vfio_get_dev_irq_info(&vdev->vbasedev,
+ VFIO_IRQ_TYPE_REMAP_BAR_REGION,
+ VFIO_IRQ_SUBTYPE_REMAP_BAR_REGION,
+ &irq);
+ if (ret) {
+ return;
+ }
+
+ if (vfio_set_irq_signaling(&vdev->vbasedev, irq->index, 0,
+ VFIO_IRQ_SET_ACTION_TRIGGER, -1, &err)) {
+ error_reportf_err(err, VFIO_MSG_PREFIX, vdev->vbasedev.name);
+ }
+ qemu_set_fd_handler(event_notifier_get_fd(&vdev->remap_bar_notifier),
+ NULL, NULL, vdev);
+ event_notifier_cleanup(&vdev->req_notifier);
+
+ vdev->remap_bar_enabled = false;
+}
+
static void vfio_realize(PCIDevice *pdev, Error **errp)
{
VFIOPCIDevice *vdev = PCI_VFIO(pdev);
@@ -3194,6 +3282,7 @@ static void vfio_realize(PCIDevice *pdev, Error **errp)
vfio_register_err_notifier(vdev);
vfio_register_req_notifier(vdev);
+ vfio_register_remap_bar_notifier(vdev);
vfio_setup_resetfn_quirk(vdev);
return;
@@ -3235,6 +3324,7 @@ static void vfio_exitfn(PCIDevice *pdev)
vfio_unregister_req_notifier(vdev);
vfio_unregister_err_notifier(vdev);
+ vfio_unregister_remap_bar_notifier(vdev);
pci_device_set_intx_routing_notifier(&vdev->pdev, NULL);
if (vdev->irqchip_change_notifier.notify) {
kvm_irqchip_remove_change_notifier(&vdev->irqchip_change_notifier);
diff --git a/hw/vfio/pci.h b/hw/vfio/pci.h
index b148c93..5a1e564 100644
--- a/hw/vfio/pci.h
+++ b/hw/vfio/pci.h
@@ -134,6 +134,7 @@ typedef struct VFIOPCIDevice {
PCIHostDeviceAddress host;
EventNotifier err_notifier;
EventNotifier req_notifier;
+ EventNotifier remap_bar_notifier;
int (*resetfn)(struct VFIOPCIDevice *);
uint32_t vendor_id;
uint32_t device_id;
@@ -157,6 +158,7 @@ typedef struct VFIOPCIDevice {
uint8_t nv_gpudirect_clique;
bool pci_aer;
bool req_enabled;
+ bool remap_bar_enabled;
bool has_flr;
bool has_pm_reset;
bool rom_read_failed;
diff --git a/include/hw/vfio/vfio-common.h b/include/hw/vfio/vfio-common.h
index a6283b7..1c16790 100644
--- a/include/hw/vfio/vfio-common.h
+++ b/include/hw/vfio/vfio-common.h
@@ -188,6 +188,8 @@ int vfio_region_setup(Object *obj, VFIODevice *vbasedev, VFIORegion *region,
int vfio_region_mmap(VFIORegion *region);
void vfio_region_mmaps_set_enabled(VFIORegion *region, bool enabled);
void vfio_region_unmap(VFIORegion *region);
+void vfio_region_reset_mmap(VFIODevice *vbasedev,
+ VFIORegion *region, int index);
void vfio_region_exit(VFIORegion *region);
void vfio_region_finalize(VFIORegion *region);
void vfio_reset_handler(void *opaque);
--git a/linux-headers/linux/vfio.h b/linux-headers/linux/vfio.h
index 2598a84..2344ca6 100644
--- a/linux-headers/linux/vfio.h
+++ b/linux-headers/linux/vfio.h
@@ -703,6 +703,17 @@ struct vfio_irq_info_cap_type {
__u32 subtype; /* type specific */
};
+/* Bar Region Query IRQ TYPE */
+#define VFIO_IRQ_TYPE_REMAP_BAR_REGION (1)
+
+/* sub-types for VFIO_IRQ_TYPE_REMAP_BAR_REGION */
+/*
+ * This irq notifies userspace to re-query BAR region and remaps the
+ * subregions.
+ */
+#define VFIO_IRQ_SUBTYPE_REMAP_BAR_REGION (0)
+
+
/**
* VFIO_DEVICE_SET_IRQS - _IOW(VFIO_TYPE, VFIO_BASE + 10, struct vfio_irq_set)
*
--
2.7.4
next prev parent reply other threads:[~2020-05-18 3:06 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-18 2:42 [RFC PATCH v4 00/10] Introduce vendor ops in vfio-pci Yan Zhao
2020-05-18 2:43 ` [RFC PATCH v4 01/10] vfio/pci: register/unregister vfio_pci_vendor_driver_ops Yan Zhao
2020-05-18 2:45 ` [RFC PATCH v4 02/10] vfio/pci: macros to generate module_init and module_exit for vendor modules Yan Zhao
2020-06-04 15:01 ` Cornelia Huck
2020-06-05 2:05 ` Yan Zhao
2020-05-18 2:49 ` [RFC PATCH v4 03/10] vfio/pci: export vendor_data, irq_type, num_regions, pdev and functions in vfio_pci_ops Yan Zhao
2020-05-18 2:49 ` [RFC PATCH v4 04/10] vfio/pci: let vfio_pci know number of vendor regions and vendor irqs Yan Zhao
2020-06-04 15:25 ` Cornelia Huck
2020-06-05 2:15 ` Yan Zhao
2020-06-11 12:31 ` David Edmondson
2020-06-11 23:09 ` Yan Zhao
2020-05-18 2:50 ` [RFC PATCH v4 05/10] vfio/pci: export vfio_pci_get_barmap Yan Zhao
2020-05-18 2:50 ` [RFC PATCH v4 06/10] vfio: Define device specific irq type capability Yan Zhao
2020-05-18 2:52 ` [RFC PATCH v4 07/10] vfio/pci: introduce a new irq type VFIO_IRQ_TYPE_REMAP_BAR_REGION Yan Zhao
2020-05-18 2:56 ` Yan Zhao [this message]
2020-05-29 21:45 ` Alex Williamson
2020-06-01 6:57 ` Yan Zhao
2020-06-01 16:43 ` Alex Williamson
2020-06-02 8:28 ` Yan Zhao
2020-06-02 19:34 ` Alex Williamson
2020-06-03 1:40 ` Yan Zhao
2020-06-03 23:04 ` Alex Williamson
2020-06-04 2:42 ` Yan Zhao
2020-06-04 4:10 ` Alex Williamson
2020-06-05 0:26 ` He, Shaopeng
2020-06-05 17:54 ` Alex Williamson
2020-06-05 2:02 ` Yan Zhao
2020-06-05 16:13 ` Alex Williamson
2020-06-10 5:23 ` Yan Zhao
2020-06-19 22:55 ` Alex Williamson
2020-06-22 3:34 ` Yan Zhao
2020-05-18 2:53 ` [RFC PATCH v4 08/10] i40e/vf_migration: VF live migration - pass-through VF first Yan Zhao
2020-06-10 8:59 ` Xiang Zheng
2020-06-11 0:23 ` Yan Zhao
2020-06-11 2:27 ` Xiang Zheng
2020-06-11 23:10 ` Yan Zhao
2020-05-18 2:54 ` [RFC PATCH v4 09/10] i40e/vf_migration: register a migration vendor region Yan Zhao
2020-05-18 2:54 ` [RFC PATCH v4 10/10] i40e/vf_migration: vendor defined irq_type to support dynamic bar map Yan Zhao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200518025618.14659-1-yan.y.zhao@intel.com \
--to=yan.y.zhao@intel.com \
--cc=alex.williamson@redhat.com \
--cc=cohuck@redhat.com \
--cc=hang.yuan@intel.com \
--cc=kevin.tian@intel.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=shaopeng.he@intel.com \
--cc=xin.zeng@intel.com \
--cc=yi.l.liu@intel.com \
--cc=zhenyuw@linux.intel.com \
--cc=zhi.a.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).