linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Christoph Hellwig <hch@lst.de>
To: "David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>,
	Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>,
	Steffen Klassert <steffen.klassert@secunet.com>,
	Herbert Xu <herbert@gondor.apana.org.au>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 8/9] ipv6: streamline addrconf_set_dstaddr
Date: Mon, 18 May 2020 13:46:54 +0200	[thread overview]
Message-ID: <20200518114655.987760-9-hch@lst.de> (raw)
In-Reply-To: <20200518114655.987760-1-hch@lst.de>

Factor out a addrconf_set_sit_dstaddr helper for the actual work if we
found a SIT device, and only hold the rtnl lock around the device lookup
and that new helper, as there is no point in holding it over a
copy_from_user call.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 net/ipv6/addrconf.c | 87 ++++++++++++++++++++-------------------------
 1 file changed, 38 insertions(+), 49 deletions(-)

diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 8300176f91e74..c827edf877414 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -2783,6 +2783,38 @@ void addrconf_prefix_rcv(struct net_device *dev, u8 *opt, int len, bool sllao)
 	in6_dev_put(in6_dev);
 }
 
+static int addrconf_set_sit_dstaddr(struct net *net, struct net_device *dev,
+		struct in6_ifreq *ireq)
+{
+	struct ip_tunnel_parm p = { };
+	mm_segment_t oldfs = get_fs();
+	struct ifreq ifr;
+	int err;
+
+	if (!(ipv6_addr_type(&ireq->ifr6_addr) & IPV6_ADDR_COMPATv4))
+		return -EADDRNOTAVAIL;
+
+	p.iph.daddr = ireq->ifr6_addr.s6_addr32[3];
+	p.iph.version = 4;
+	p.iph.ihl = 5;
+	p.iph.protocol = IPPROTO_IPV6;
+	p.iph.ttl = 64;
+	ifr.ifr_ifru.ifru_data = (__force void __user *)&p;
+
+	if (!dev->netdev_ops->ndo_do_ioctl)
+		return -EOPNOTSUPP;
+	set_fs(KERNEL_DS);
+	err = dev->netdev_ops->ndo_do_ioctl(dev, &ifr, SIOCADDTUNNEL);
+	set_fs(oldfs);
+	if (err)
+		return err;
+
+	dev = __dev_get_by_name(net, p.name);
+	if (!dev)
+		return -ENOBUFS;
+	return dev_open(dev, NULL);
+}
+
 /*
  *	Set destination address.
  *	Special case for SIT interfaces where we create a new "virtual"
@@ -2790,62 +2822,19 @@ void addrconf_prefix_rcv(struct net_device *dev, u8 *opt, int len, bool sllao)
  */
 int addrconf_set_dstaddr(struct net *net, void __user *arg)
 {
-	struct in6_ifreq ireq;
 	struct net_device *dev;
-	int err = -EINVAL;
+	struct in6_ifreq ireq;
+	int err = -ENODEV;
 
 	if (!IS_ENABLED(CONFIG_IPV6_SIT))
 		return -ENODEV;
-
-	rtnl_lock();
-
-	err = -EFAULT;
 	if (copy_from_user(&ireq, arg, sizeof(struct in6_ifreq)))
-		goto err_exit;
+		return -EFAULT;
 
+	rtnl_lock();
 	dev = __dev_get_by_index(net, ireq.ifr6_ifindex);
-
-	err = -ENODEV;
-	if (!dev)
-		goto err_exit;
-
-	if (dev->type == ARPHRD_SIT) {
-		const struct net_device_ops *ops = dev->netdev_ops;
-		struct ifreq ifr;
-		struct ip_tunnel_parm p;
-
-		err = -EADDRNOTAVAIL;
-		if (!(ipv6_addr_type(&ireq.ifr6_addr) & IPV6_ADDR_COMPATv4))
-			goto err_exit;
-
-		memset(&p, 0, sizeof(p));
-		p.iph.daddr = ireq.ifr6_addr.s6_addr32[3];
-		p.iph.saddr = 0;
-		p.iph.version = 4;
-		p.iph.ihl = 5;
-		p.iph.protocol = IPPROTO_IPV6;
-		p.iph.ttl = 64;
-		ifr.ifr_ifru.ifru_data = (__force void __user *)&p;
-
-		if (ops->ndo_do_ioctl) {
-			mm_segment_t oldfs = get_fs();
-
-			set_fs(KERNEL_DS);
-			err = ops->ndo_do_ioctl(dev, &ifr, SIOCADDTUNNEL);
-			set_fs(oldfs);
-		} else
-			err = -EOPNOTSUPP;
-
-		if (err == 0) {
-			err = -ENOBUFS;
-			dev = __dev_get_by_name(net, p.name);
-			if (!dev)
-				goto err_exit;
-			err = dev_open(dev, NULL);
-		}
-	}
-
-err_exit:
+	if (dev && dev->type == ARPHRD_SIT)
+		err = addrconf_set_sit_dstaddr(net, dev, &ireq);
 	rtnl_unlock();
 	return err;
 }
-- 
2.26.2


  parent reply	other threads:[~2020-05-18 11:47 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-18 11:46 add a new ->ndo_tunnel_ctl method to avoid a few set_fs calls Christoph Hellwig
2020-05-18 11:46 ` [PATCH 1/9] ipv4: streamline ipmr_new_tunnel Christoph Hellwig
2020-05-18 11:46 ` [PATCH 2/9] ipv4: consolidate the VIFF_TUNNEL handling in ipmr_new_tunnel Christoph Hellwig
2020-05-18 11:46 ` [PATCH 3/9] net: add a new ndo_tunnel_ioctl method Christoph Hellwig
2020-05-18 11:46 ` [PATCH 4/9] impr: use ->ndo_tunnel_ctl in ipmr_new_tunnel Christoph Hellwig
2020-05-18 11:46 ` [PATCH 5/9] sit: refactor ipip6_tunnel_ioctl Christoph Hellwig
2020-05-18 16:43   ` Jakub Kicinski
2020-05-18 16:47     ` Christoph Hellwig
2020-05-18 17:18       ` Jakub Kicinski
2020-05-18 11:46 ` [PATCH 6/9] sit: impement ->ndo_tunnel_ctl Christoph Hellwig
2020-05-18 11:46 ` [PATCH 7/9] ipv6: stub out even more of addrconf_set_dstaddr if SIT is disabled Christoph Hellwig
2020-05-18 11:46 ` Christoph Hellwig [this message]
2020-05-18 11:46 ` [PATCH 9/9] ipv6: use ->ndo_tunnel_ctl in addrconf_set_dstaddr Christoph Hellwig
2020-05-19 13:03 add a new ->ndo_tunnel_ctl method to avoid a few set_fs calls v2 Christoph Hellwig
2020-05-19 13:03 ` [PATCH 8/9] ipv6: streamline addrconf_set_dstaddr Christoph Hellwig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200518114655.987760-9-hch@lst.de \
    --to=hch@lst.de \
    --cc=davem@davemloft.net \
    --cc=herbert@gondor.apana.org.au \
    --cc=kuba@kernel.org \
    --cc=kuznet@ms2.inr.ac.ru \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=steffen.klassert@secunet.com \
    --cc=yoshfuji@linux-ipv6.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).