[PATCH 5.4 000/147] 5.4.42-rc1 review

[PATCH 5.4 000/147] 5.4.42-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.4.42 release.
There are 147 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 20 May 2020 17:32:42 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.42-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.4.42-rc1

Kamal Mostafa <kamal@canonical.com>
    bpf: Test_progs, fix test_get_stack_rawtp_err.c build

Andrii Nakryiko <andriin@fb.com>
    selftest/bpf: fix backported test_select_reuseport selftest changes

Andrii Nakryiko <andriin@fb.com>
    libbpf: Extract and generalize CPU mask parsing logic

Sergei Trofimovich <slyfox@gentoo.org>
    Makefile: disallow data races on gcc-10 as well

Jim Mattson <jmattson@google.com>
    KVM: x86: Fix off-by-one error in kvm_vcpu_ioctl_x86_setup_mce

Xiyu Yang <xiyuyang19@fudan.edu.cn>
    bpf: Fix sk_psock refcnt leak when receiving message

Chuck Lever <chuck.lever@oracle.com>
    SUNRPC: Revert 241b1f419f0e ("SUNRPC: Remove xdr_buf_trim()")

Geert Uytterhoeven <geert+renesas@glider.be>
    ARM: dts: r8a7740: Add missing extal2 to CPG node

Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
    arm64: dts: renesas: r8a77980: Fix IPMMU VIP[01] nodes

Geert Uytterhoeven <geert+renesas@glider.be>
    ARM: dts: r8a73a4: Add missing CMT1 interrupts

Adam Ford <aford173@gmail.com>
    arm64: dts: imx8mn: Change SDMA1 ahb clock for imx8mn

Chen-Yu Tsai <wens@csie.org>
    arm64: dts: rockchip: Rename dwc3 device nodes on rk3399 to make dtc happy

Chen-Yu Tsai <wens@csie.org>
    arm64: dts: rockchip: Replace RK805 PMIC node name with "pmic" on rk3328 boards

Neil Armstrong <narmstrong@baylibre.com>
    arm64: dts: meson-g12-common: fix dwc2 clock names

Neil Armstrong <narmstrong@baylibre.com>
    arm64: dts: meson-g12b-khadas-vim3: add missing frddr_a status property

Marc Zyngier <maz@kernel.org>
    clk: Unlink clock if failed to prepare or enable

Kai-Heng Feng <kai.heng.feng@canonical.com>
    Revert "ALSA: hda/realtek: Fix pop noise on ALC225"

Wei Yongjun <weiyongjun1@huawei.com>
    usb: gadget: legacy: fix error return code in cdc_bind()

Wei Yongjun <weiyongjun1@huawei.com>
    usb: gadget: legacy: fix error return code in gncm_bind()

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    usb: gadget: audio: Fix a missing error return value in audio_bind()

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    usb: gadget: net2272: Fix a memory leak in an error handling path in 'net2272_plat_probe()'

Amir Goldstein <amir73il@gmail.com>
    fanotify: fix merging marks masks with FAN_ONDIR

John Stultz <john.stultz@linaro.org>
    dwc3: Remove check for HWO flag in dwc3_gadget_ep_reclaim_trb_sg()

Justin Swartz <justin.swartz@risingedge.co.za>
    clk: rockchip: fix incorrect configuration of rk3228 aclk_gpu* clocks

Eric W. Biederman <ebiederm@xmission.com>
    exec: Move would_dump into flush_old_exec

Josh Poimboeuf <jpoimboe@redhat.com>
    x86/unwind/orc: Fix error handling in __unwind_start()

Borislav Petkov <bp@suse.de>
    x86: Fix early boot crash on gcc-10, third try

Adam McCoy <adam@forsedomani.com>
    cifs: fix leaked reference on requeued write

Christophe Leroy <christophe.leroy@c-s.fr>
    powerpc/32s: Fix build failure with CONFIG_PPC_KUAP_DEBUG

Simon Ser <contact@emersion.fr>
    drm/amd/display: add basic atomic check for cursor plane

Michal Vokáč <michal.vokac@ysoft.com>
    ARM: dts: imx6dl-yapp4: Fix Ursa board Ethernet connection

Fabio Estevam <festevam@gmail.com>
    ARM: dts: imx27-phytec-phycard-s-rdk: Fix the I2C1 pinctrl entries

Kishon Vijay Abraham I <kishon@ti.com>
    ARM: dts: dra7: Fix bus_dma_limit for PCIe

Peter Jones <pjones@redhat.com>
    Make the "Reducing compressed framebufer size" message be DRM_INFO_ONCE()

Sriharsha Allenki <sallenki@codeaurora.org>
    usb: xhci: Fix NULL pointer dereference when enqueuing trbs from urb sg list

Kyungtae Kim <kt0755@gmail.com>
    USB: gadget: fix illegal array access in binding with UDC

Peter Chen <peter.chen@nxp.com>
    usb: cdns3: gadget: prev_req->trb is NULL for ep0

Li Jun <jun.li@nxp.com>
    usb: host: xhci-plat: keep runtime active when removing host

Eugeniu Rosca <erosca@de.adit-jv.com>
    usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534B

Jesus Ramos <jesus-ramos@live.com>
    ALSA: usb-audio: Add control message quirk delay for Kingston HyperX headset

Takashi Iwai <tiwai@suse.de>
    ALSA: rawmidi: Fix racy buffer resize under concurrent accesses

Takashi Iwai <tiwai@suse.de>
    ALSA: hda/realtek - Add COEF workaround for ASUS ZenBook UX431DA

Takashi Iwai <tiwai@suse.de>
    ALSA: hda/realtek - Limit int mic boost for Thinkpad T530

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    USB: usbfs: fix mmap dma mismatch

Jeremy Linton <jeremy.linton@arm.com>
    usb: usbfs: correct kernel->user page attribute mismatch

Linus Torvalds <torvalds@linux-foundation.org>
    gcc-10: avoid shadowing standard library 'free()' in crypto

Linus Torvalds <torvalds@linux-foundation.org>
    gcc-10: mark more functions __init to avoid section mismatch warnings

Linus Torvalds <torvalds@linux-foundation.org>
    gcc-10 warnings: fix low-hanging fruit

Linus Torvalds <torvalds@linux-foundation.org>
    gcc-10: disable 'restrict' warning for now

Linus Torvalds <torvalds@linux-foundation.org>
    gcc-10: disable 'stringop-overflow' warning for now

Linus Torvalds <torvalds@linux-foundation.org>
    gcc-10: disable 'array-bounds' warning for now

Linus Torvalds <torvalds@linux-foundation.org>
    gcc-10: disable 'zero-length-bounds' warning for now

Linus Torvalds <torvalds@linux-foundation.org>
    Stop the ad-hoc games with -Wno-maybe-initialized

Jason Gunthorpe <jgg@ziepe.ca>
    net/rds: Use ERR_PTR for rds_message_alloc_sgs()

Jason Gunthorpe <jgg@ziepe.ca>
    pnp: Use list_for_each_entry() instead of open coding

Olga Kornievskaia <olga.kornievskaia@gmail.com>
    NFSv3: fix rpc receive buffer size for MOUNT call

Yafang Shao <laoar.shao@gmail.com>
    mm, memcg: fix inconsistent oom event behavior

Wei Yongjun <weiyongjun1@huawei.com>
    s390/ism: fix error return code in ism_probe()

Samu Nuutamo <samu.nuutamo@vincit.fi>
    hwmon: (da9052) Synchronize access with mfd

Potnuri Bharat Teja <bharat@chelsio.com>
    RDMA/iw_cxgb4: Fix incorrect function parameters

Sasha Levin <sashal@kernel.org>
    RDMA/core: Fix double put of resource

Jack Morgenstein <jackm@dev.mellanox.co.il>
    IB/core: Fix potential NULL pointer dereference in pkey cache

Jack Morgenstein <jackm@dev.mellanox.co.il>
    IB/mlx4: Test return value of calls to ib_get_cached_pkey

Sudip Mukherjee <sudipm.mukherjee@gmail.com>
    RDMA/rxe: Always return ERR_PTR from rxe_create_mmap_info()

Phil Sutter <phil@nwl.cc>
    netfilter: nft_set_rbtree: Add missing expired checks

Stefano Brivio <sbrivio@redhat.com>
    netfilter: nft_set_rbtree: Introduce and use nft_rbtree_interval_start()

Chuck Lever <chuck.lever@oracle.com>
    SUNRPC: Signalled ASYNC tasks need to exit

J. Bruce Fields <bfields@redhat.com>
    nfs: fix NULL deference in nfs4_get_valid_delegation

Christoph Hellwig <hch@lst.de>
    arm64: fix the flush_icache_range arguments in machine_kexec

Zhenyu Wang <zhenyuw@linux.intel.com>
    drm/i915/gvt: Fix kernel oops for 3-level ppgtt guest

Arnd Bergmann <arnd@arndb.de>
    netfilter: conntrack: avoid gcc-10 zero-length-bounds warning

Dave Wysochanski <dwysocha@redhat.com>
    NFSv4: Fix fscache cookie aux_data to ensure change_attr is included

Arnd Bergmann <arnd@arndb.de>
    nfs: fscache: use timespec64 in inode auxdata

Dave Wysochanski <dwysocha@redhat.com>
    NFS: Fix fscache super_cookie index_key from changing after umount

Alex Deucher <alexander.deucher@amd.com>
    drm/amdgpu: force fbdev into vram

Christian Brauner <christian.brauner@ubuntu.com>
    fork: prevent accidental access to clone3 features

Andreas Gruenbacher <agruenba@redhat.com>
    gfs2: More gfs2_find_jhead fixes

Adrian Hunter <adrian.hunter@intel.com>
    mmc: block: Fix request completion in the CQE timeout path

Sarthak Garg <sartgarg@codeaurora.org>
    mmc: core: Fix recursive locking issue in CQE recovery path

Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
    mmc: core: Check request type before completing the request

Ben Chuang <ben.chuang@genesyslogic.com.tw>
    mmc: sdhci-pci-gli: Fix can not access GL9750 after reboot from Windows 10

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    mmc: alcor: Fix a resource leak in the error path for ->probe()

John Fastabend <john.fastabend@gmail.com>
    bpf, sockmap: bpf_tcp_ingress needs to subtract bytes from sg.size

John Fastabend <john.fastabend@gmail.com>
    bpf, sockmap: msg_pop_data can incorrecty set an sge length

Sultan Alsawaf <sultan@kerneltoast.com>
    drm/i915: Don't enable WaIncreaseLatencyIPCEnabled when IPC is disabled

Dan Carpenter <dan.carpenter@oracle.com>
    i40iw: Fix error handling in i40iw_manage_arp_cache()

Takashi Sakamoto <o-takashi@sakamocchi.jp>
    ALSA: firewire-lib: fix 'function sizeof not defined' error of tracepoints format

Wei Yongjun <weiyongjun1@huawei.com>
    bpf: Fix error return code in map_lookup_and_delete_elem()

Grace Kao <grace.kao@intel.com>
    pinctrl: cherryview: Add missing spinlock usage in chv_gpio_irq_handler

Ansuel Smith <ansuelsmth@gmail.com>
    pinctrl: qcom: fix wrong write in update_dual_edge

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    pinctrl: baytrail: Enable pin configuration setting for GPIO chip

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    pinctrl: sunrisepoint: Fix PAD lock register offset for SPT-H

Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    ACPI: EC: PM: Avoid premature returns from acpi_s2idle_wake()

Mike Marciniszyn <mike.marciniszyn@intel.com>
    IB/hfi1: Fix another case where pq is left on waitlist

Ben Chuang <ben.chuang@genesyslogic.com.tw>
    mmc: sdhci-pci-gli: Fix no irq handler from suspend

Andreas Gruenbacher <agruenba@redhat.com>
    gfs2: Another gfs2_walk_metadata fix

Kai-Heng Feng <kai.heng.feng@canonical.com>
    ALSA: hda/realtek - Fix S3 pop noise on Dell Wyse

Vasily Averin <vvs@virtuozzo.com>
    ipc/util.c: sysvipc_find_ipc() incorrectly updates position index

Marek Olšák <marek.olsak@amd.com>
    drm/amdgpu: invalidate L2 before SDMA IBs (v2)

Luben Tuikov <luben.tuikov@amd.com>
    drm/amdgpu: simplify padding calculations (v2)

Vasily Averin <vvs@virtuozzo.com>
    drm/qxl: lost qxl_bo_kunmap_atomic_page in qxl_image_init_helper()

Sung Lee <sung.lee@amd.com>
    drm/amd/display: Update downspread percent to match spreadsheet for DCN2.1

Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
    drm/amd/display: check if REFCLK_CNTL register is present

Tiecheng Zhou <Tiecheng.Zhou@amd.com>
    drm/amd/powerplay: avoid using pm_en before it is initialized revised

Kai Vehmanen <kai.vehmanen@linux.intel.com>
    ALSA: hda/hdmi: fix race in monitor detection during probe

Chris Wilson <chris@chris-wilson.co.uk>
    cpufreq: intel_pstate: Only mention the BIOS disabling turbo mode once

Xiao Yang <yangx.jy@cn.fujitsu.com>
    selftests/ftrace: Check the first record for kprobe_args_type.tc

Lubomir Rintel <lkundrak@v3.sk>
    dmaengine: mmp_tdma: Reset channel error on release

Lubomir Rintel <lkundrak@v3.sk>
    dmaengine: mmp_tdma: Do not ignore slave config validation errors

Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
    dmaengine: pch_dma.c: Avoid data race between probe and irq handler

Ilie Halip <ilie.halip@gmail.com>
    riscv: fix vdso build with lld

Vincent Minet <v.minet@criteo.com>
    umh: fix memory leak on execve failure

Heiner Kallweit <hkallweit1@gmail.com>
    r8169: re-establish support for RTL8401 chip version

Wei Yongjun <weiyongjun1@huawei.com>
    nfp: abm: fix error return code in nfp_abm_vnic_alloc()

Kelly Littlepage <kelly@onechronos.com>
    net: tcp: fix rx timestamp behavior for tcp_recvmsg

Zefan Li <lizefan@huawei.com>
    netprio_cgroup: Fix unlimited memory leak of v2 cgroups

Paolo Abeni <pabeni@redhat.com>
    net: ipv4: really enforce backoff for redirects

Florian Fainelli <f.fainelli@gmail.com>
    net: dsa: loop: Add module soft dependency

Luo bin <luobin9@huawei.com>
    hinic: fix a bug of ndo_stop

Dan Carpenter <dan.carpenter@oracle.com>
    dpaa2-eth: prevent array underflow in update_cls_rule()

Michael S. Tsirkin <mst@redhat.com>
    virtio_net: fix lockdep warning on 32 bit

Eric Dumazet <edumazet@google.com>
    tcp: fix SO_RCVLOWAT hangs with fat skbs

Eric Dumazet <edumazet@google.com>
    tcp: fix error recovery in tcp_zerocopy_receive()

Maciej Żenczykowski <maze@google.com>
    Revert "ipv6: add mtu lock check in __ip6_rt_update_pmtu"

Guillaume Nault <gnault@redhat.com>
    pppoe: only process PADT targeted at local interfaces

Vinod Koul <vkoul@kernel.org>
    net: stmmac: fix num_por initialization

Heiner Kallweit <hkallweit1@gmail.com>
    net: phy: fix aneg restart in phy_ethtool_set_eee

Paolo Abeni <pabeni@redhat.com>
    netlabel: cope with NULL catmap

Cong Wang <xiyou.wangcong@gmail.com>
    net: fix a potential recursive NETDEV_FEAT_CHANGE

Ioana Ciornei <ioana.ciornei@nxp.com>
    dpaa2-eth: properly handle buffer size restrictions

Raul E Rangel <rrangel@chromium.org>
    mmc: sdhci-acpi: Add SDHCI_QUIRK2_BROKEN_64_BIT_DMA for AMDI0040

Hangbin Liu <liuhangbin@gmail.com>
    selftests/bpf: fix goto cleanup label not defined

Wu Bo <wubo40@huawei.com>
    scsi: sg: add sg_remove_request in sg_write

Cong Wang <xiyou.wangcong@gmail.com>
    net_sched: fix tcm_parent in tc filter dump

Arnd Bergmann <arnd@arndb.de>
    sun6i: dsi: fix gcc-4.8

Stefan Hajnoczi <stefanha@redhat.com>
    virtio-blk: handle block_device_operations callbacks after hot unplug

Arnd Bergmann <arnd@arndb.de>
    drop_monitor: work around gcc-10 stringop-overflow warning

Alan Maguire <alan.maguire@oracle.com>
    ftrace/selftests: workaround cgroup RT scheduling issues

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    net: moxa: Fix a potential double 'free_irq()'

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    net/sonic: Fix a resource leak in an error handling path in 'jazz_sonic_probe()'

Chuck Lever <chuck.lever@oracle.com>
    SUNRPC: Fix GSS privacy computation of auth->au_ralign

Chuck Lever <chuck.lever@oracle.com>
    SUNRPC: Add "@len" parameter to gss_unwrap()

Adam Ford <aford173@gmail.com>
    gpio: pca953x: Fix pca953x_gpio_set_config

Marc Zyngier <maz@kernel.org>
    KVM: arm: vgic: Synchronize the whole guest on GIC{D,R}_I{S,C}ACTIVER read

Yuiko Oshino <yuiko.oshino@microchip.com>
    net: phy: microchip_t1: add lan87xx_phy_init to initialize the lan87xx phy.

Hugh Dickins <hughd@google.com>
    shmem: fix possible deadlocks on shmlock_user_lock

Florian Fainelli <f.fainelli@gmail.com>
    net: dsa: Do not make user port errors fatal


-------------

Diffstat:

 Makefile                                           |  20 ++-
 arch/arm/boot/dts/dra7.dtsi                        |   4 +-
 arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts   |   4 +-
 arch/arm/boot/dts/imx6dl-yapp4-ursa.dts            |   2 +-
 arch/arm/boot/dts/r8a73a4.dtsi                     |   9 +-
 arch/arm/boot/dts/r8a7740.dtsi                     |   2 +-
 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi  |   2 +-
 .../boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi   |   4 +
 arch/arm64/boot/dts/freescale/imx8mn.dtsi          |   2 +-
 arch/arm64/boot/dts/renesas/r8a77980.dtsi          |   2 +
 arch/arm64/boot/dts/rockchip/rk3328-evb.dts        |   2 +-
 arch/arm64/boot/dts/rockchip/rk3328-rock64.dts     |   2 +-
 arch/arm64/boot/dts/rockchip/rk3399.dtsi           |   4 +-
 arch/arm64/kernel/machine_kexec.c                  |   1 +
 arch/powerpc/include/asm/book3s/32/kup.h           |   2 +-
 arch/riscv/kernel/vdso/Makefile                    |   6 +-
 arch/x86/include/asm/stackprotector.h              |   7 +-
 arch/x86/kernel/smpboot.c                          |   8 +
 arch/x86/kernel/unwind_orc.c                       |  16 +-
 arch/x86/kvm/x86.c                                 |   2 +-
 arch/x86/xen/smp_pv.c                              |   1 +
 crypto/lrw.c                                       |   4 +-
 crypto/xts.c                                       |   4 +-
 drivers/acpi/ec.c                                  |  24 ++-
 drivers/acpi/internal.h                            |   1 -
 drivers/acpi/sleep.c                               |  14 +-
 drivers/block/virtio_blk.c                         |  86 ++++++++++-
 drivers/clk/clk.c                                  |   3 +
 drivers/clk/rockchip/clk-rk3228.c                  |  17 +-
 drivers/cpufreq/intel_pstate.c                     |   2 +-
 drivers/dma/mmp_tdma.c                             |   5 +-
 drivers/dma/pch_dma.c                              |   2 +-
 drivers/firmware/efi/tpm.c                         |   2 +-
 drivers/gpio/gpio-pca953x.c                        |   2 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c             |   3 +-
 drivers/gpu/drm/amd/amdgpu/cik_sdma.c              |   4 +-
 drivers/gpu/drm/amd/amdgpu/navi10_sdma_pkt_open.h  |  16 ++
 drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c             |   4 +-
 drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c             |   4 +-
 drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c             |   4 +-
 drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c             |  31 +++-
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c  |  26 +++-
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c |   3 +-
 .../gpu/drm/amd/display/dc/dcn21/dcn21_resource.c  |   2 +-
 drivers/gpu/drm/amd/powerplay/amd_powerplay.c      |   6 +-
 drivers/gpu/drm/i915/display/intel_fbc.c           |   3 +-
 drivers/gpu/drm/i915/gvt/scheduler.c               |   6 +-
 drivers/gpu/drm/i915/intel_pm.c                    |   2 +-
 drivers/gpu/drm/qxl/qxl_image.c                    |   3 +-
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c             |   2 +-
 drivers/hwmon/da9052-hwmon.c                       |   4 +-
 drivers/infiniband/core/cache.c                    |   7 +-
 drivers/infiniband/core/nldev.c                    |   2 +-
 drivers/infiniband/hw/cxgb4/cm.c                   |   7 +-
 drivers/infiniband/hw/hfi1/user_sdma.c             |   4 -
 drivers/infiniband/hw/i40iw/i40iw_hw.c             |   2 +-
 drivers/infiniband/hw/mlx4/qp.c                    |  14 +-
 drivers/infiniband/sw/rxe/rxe_mmap.c               |   2 +-
 drivers/infiniband/sw/rxe/rxe_queue.c              |  11 +-
 drivers/mmc/core/block.c                           |   3 +-
 drivers/mmc/core/queue.c                           |  16 +-
 drivers/mmc/host/alcor.c                           |   6 +-
 drivers/mmc/host/sdhci-acpi.c                      |  10 +-
 drivers/mmc/host/sdhci-pci-gli.c                   |  23 +++
 drivers/net/dsa/dsa_loop.c                         |   1 +
 drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c   |  29 ++--
 drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h   |   1 +
 .../net/ethernet/freescale/dpaa2/dpaa2-ethtool.c   |   2 +-
 drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c  |  16 +-
 drivers/net/ethernet/huawei/hinic/hinic_main.c     |  16 +-
 drivers/net/ethernet/moxa/moxart_ether.c           |   2 +-
 drivers/net/ethernet/natsemi/jazzsonic.c           |   6 +-
 drivers/net/ethernet/netronome/nfp/abm/main.c      |   4 +-
 drivers/net/ethernet/realtek/r8169_main.c          |   2 +
 .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c    |  17 +-
 drivers/net/phy/microchip_t1.c                     | 171 +++++++++++++++++++++
 drivers/net/phy/phy.c                              |   8 +-
 drivers/net/ppp/pppoe.c                            |   3 +
 drivers/net/virtio_net.c                           |   6 +-
 drivers/pinctrl/intel/pinctrl-baytrail.c           |   1 +
 drivers/pinctrl/intel/pinctrl-cherryview.c         |   4 +
 drivers/pinctrl/intel/pinctrl-sunrisepoint.c       |  15 +-
 drivers/pinctrl/qcom/pinctrl-msm.c                 |   2 +-
 drivers/s390/net/ism_drv.c                         |   4 +-
 drivers/scsi/sg.c                                  |   4 +-
 drivers/usb/cdns3/gadget.c                         |   2 +-
 drivers/usb/core/devio.c                           |  19 ++-
 drivers/usb/core/hub.c                             |   6 +-
 drivers/usb/dwc3/gadget.c                          |   3 -
 drivers/usb/gadget/configfs.c                      |   3 +
 drivers/usb/gadget/legacy/audio.c                  |   4 +-
 drivers/usb/gadget/legacy/cdc2.c                   |   4 +-
 drivers/usb/gadget/legacy/ncm.c                    |   4 +-
 drivers/usb/gadget/udc/net2272.c                   |   2 +
 drivers/usb/host/xhci-plat.c                       |   4 +-
 drivers/usb/host/xhci-ring.c                       |   4 +-
 fs/cifs/cifssmb.c                                  |   2 +-
 fs/exec.c                                          |   4 +-
 fs/gfs2/bmap.c                                     |  16 +-
 fs/gfs2/lops.c                                     |  19 ++-
 fs/nfs/fscache-index.c                             |   6 +-
 fs/nfs/fscache.c                                   |  31 ++--
 fs/nfs/fscache.h                                   |   8 +-
 fs/nfs/mount_clnt.c                                |   3 +-
 fs/nfs/nfs4state.c                                 |   2 +-
 fs/notify/fanotify/fanotify.c                      |  11 +-
 include/linux/compiler.h                           |   6 +
 include/linux/fs.h                                 |   2 +-
 include/linux/memcontrol.h                         |   2 +
 include/linux/pnp.h                                |  29 ++--
 include/linux/skmsg.h                              |   1 +
 include/linux/sunrpc/gss_api.h                     |   3 +
 include/linux/sunrpc/gss_krb5.h                    |   6 +-
 include/linux/sunrpc/xdr.h                         |   1 +
 include/linux/tty.h                                |   2 +-
 include/net/netfilter/nf_conntrack.h               |   2 +-
 include/net/sch_generic.h                          |   1 +
 include/net/tcp.h                                  |  13 ++
 include/sound/rawmidi.h                            |   1 +
 init/Kconfig                                       |  18 ---
 init/initramfs.c                                   |   2 +-
 init/main.c                                        |   2 +
 ipc/util.c                                         |  12 +-
 kernel/bpf/syscall.c                               |   4 +-
 kernel/fork.c                                      |  13 +-
 kernel/trace/Kconfig                               |   1 -
 kernel/umh.c                                       |   6 +
 mm/shmem.c                                         |   7 +-
 net/core/dev.c                                     |   4 +-
 net/core/drop_monitor.c                            |  11 +-
 net/core/filter.c                                  |   2 +-
 net/core/netprio_cgroup.c                          |   2 +
 net/dsa/dsa2.c                                     |   8 +-
 net/ipv4/cipso_ipv4.c                              |   6 +-
 net/ipv4/route.c                                   |   2 +-
 net/ipv4/tcp.c                                     |  27 +++-
 net/ipv4/tcp_bpf.c                                 |  10 +-
 net/ipv4/tcp_input.c                               |   3 +-
 net/ipv6/calipso.c                                 |   3 +-
 net/ipv6/route.c                                   |   6 +-
 net/netfilter/nf_conntrack_core.c                  |   4 +-
 net/netfilter/nft_set_rbtree.c                     |  28 +++-
 net/netlabel/netlabel_kapi.c                       |   6 +
 net/rds/message.c                                  |  19 +--
 net/rds/rdma.c                                     |  12 +-
 net/rds/rds.h                                      |   3 +-
 net/rds/send.c                                     |   6 +-
 net/sched/cls_api.c                                |   8 +-
 net/sunrpc/auth_gss/auth_gss.c                     |  12 +-
 net/sunrpc/auth_gss/gss_krb5_crypto.c              |   8 +-
 net/sunrpc/auth_gss/gss_krb5_wrap.c                |  44 ++++--
 net/sunrpc/auth_gss/gss_mech_switch.c              |   3 +-
 net/sunrpc/auth_gss/svcauth_gss.c                  |  10 +-
 net/sunrpc/clnt.c                                  |   5 +
 net/sunrpc/xdr.c                                   |  41 +++++
 sound/core/rawmidi.c                               |  31 +++-
 sound/firewire/amdtp-stream-trace.h                |   3 +-
 sound/pci/hda/patch_hdmi.c                         |   2 +
 sound/pci/hda/patch_realtek.c                      |  41 ++++-
 sound/usb/quirks.c                                 |   9 +-
 tools/lib/bpf/libbpf.c                             | 126 ++++++++++-----
 tools/lib/bpf/libbpf_internal.h                    |   2 +
 .../bpf/prog_tests/stacktrace_build_id_nmi.c       |   2 +-
 .../selftests/bpf/progs/test_get_stack_rawtp_err.c |   2 +-
 .../testing/selftests/bpf/test_select_reuseport.c  |   4 +-
 tools/testing/selftests/ftrace/ftracetest          |  22 +++
 .../ftrace/test.d/kprobe/kprobe_args_type.tc       |   2 +-
 virt/kvm/arm/vgic/vgic-mmio-v2.c                   |   4 +-
 virt/kvm/arm/vgic/vgic-mmio-v3.c                   |  12 +-
 virt/kvm/arm/vgic/vgic-mmio.c                      | 100 +++++++-----
 virt/kvm/arm/vgic/vgic-mmio.h                      |   3 +
 171 files changed, 1238 insertions(+), 523 deletions(-)

[PATCH 5.4 001/147] net: dsa: Do not make user port errors fatal

[Greg Kroah-Hartman]

From: Florian Fainelli <f.fainelli@gmail.com>

commit 86f8b1c01a0a537a73d2996615133be63cdf75db upstream.

Prior to 1d27732f411d ("net: dsa: setup and teardown ports"), we would
not treat failures to set-up an user port as fatal, but after this
commit we would, which is a regression for some systems where interfaces
may be declared in the Device Tree, but the underlying hardware may not
be present (pluggable daughter cards for instance).

Fixes: 1d27732f411d ("net: dsa: setup and teardown ports")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 net/dsa/dsa2.c |    8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

--- a/net/dsa/dsa2.c
+++ b/net/dsa/dsa2.c
@@ -461,18 +461,12 @@ static int dsa_tree_setup_switches(struc
 
 			err = dsa_port_setup(dp);
 			if (err)
-				goto ports_teardown;
+				continue;
 		}
 	}
 
 	return 0;
 
-ports_teardown:
-	for (i = 0; i < port; i++)
-		dsa_port_teardown(&ds->ports[i]);
-
-	dsa_switch_teardown(ds);
-
 switch_teardown:
 	for (i = 0; i < device; i++) {
 		ds = dst->ds[i];

[PATCH 5.4 002/147] shmem: fix possible deadlocks on shmlock_user_lock

[Greg Kroah-Hartman]

From: Hugh Dickins <hughd@google.com>

[ Upstream commit ea0dfeb4209b4eab954d6e00ed136bc6b48b380d ]

Recent commit 71725ed10c40 ("mm: huge tmpfs: try to split_huge_page()
when punching hole") has allowed syzkaller to probe deeper, uncovering a
long-standing lockdep issue between the irq-unsafe shmlock_user_lock,
the irq-safe xa_lock on mapping->i_pages, and shmem inode's info->lock
which nests inside xa_lock (or tree_lock) since 4.8's shmem_uncharge().

user_shm_lock(), servicing SysV shmctl(SHM_LOCK), wants
shmlock_user_lock while its caller shmem_lock() holds info->lock with
interrupts disabled; but hugetlbfs_file_setup() calls user_shm_lock()
with interrupts enabled, and might be interrupted by a writeback endio
wanting xa_lock on i_pages.

This may not risk an actual deadlock, since shmem inodes do not take
part in writeback accounting, but there are several easy ways to avoid
it.

Requiring interrupts disabled for shmlock_user_lock would be easy, but
it's a high-level global lock for which that seems inappropriate.
Instead, recall that the use of info->lock to guard info->flags in
shmem_lock() dates from pre-3.1 days, when races with SHMEM_PAGEIN and
SHMEM_TRUNCATE could occur: nowadays it serves no purpose, the only flag
added or removed is VM_LOCKED itself, and calls to shmem_lock() an inode
are already serialized by the caller.

Take info->lock out of the chain and the possibility of deadlock or
lockdep warning goes away.

Fixes: 4595ef88d136 ("shmem: make shmem_inode_info::lock irq-safe")
Reported-by: syzbot+c8a8197c8852f566b9d9@syzkaller.appspotmail.com
Reported-by: syzbot+40b71e145e73f78f81ad@syzkaller.appspotmail.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2004161707410.16322@eggly.anvils
Link: https://lore.kernel.org/lkml/000000000000e5838c05a3152f53@google.com/
Link: https://lore.kernel.org/lkml/0000000000003712b305a331d3b1@google.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/shmem.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/mm/shmem.c b/mm/shmem.c
index e71b15da19854..98802ca76a5c3 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2183,7 +2183,11 @@ int shmem_lock(struct file *file, int lock, struct user_struct *user)
 	struct shmem_inode_info *info = SHMEM_I(inode);
 	int retval = -ENOMEM;
 
-	spin_lock_irq(&info->lock);
+	/*
+	 * What serializes the accesses to info->flags?
+	 * ipc_lock_object() when called from shmctl_do_lock(),
+	 * no serialization needed when called from shm_destroy().
+	 */
 	if (lock && !(info->flags & VM_LOCKED)) {
 		if (!user_shm_lock(inode->i_size, user))
 			goto out_nomem;
@@ -2198,7 +2202,6 @@ int shmem_lock(struct file *file, int lock, struct user_struct *user)
 	retval = 0;
 
 out_nomem:
-	spin_unlock_irq(&info->lock);
 	return retval;
 }
 
-- 
2.20.1

[PATCH 5.4 003/147] net: phy: microchip_t1: add lan87xx_phy_init to initialize the lan87xx phy.

[Greg Kroah-Hartman]

From: Yuiko Oshino <yuiko.oshino@microchip.com>

[ Upstream commit 63edbcceef612bdd95fa28ce100460c7b79008a4 ]

lan87xx_phy_init() initializes the lan87xx phy hardware
including its TC10 Wake-up and Sleep features.

Fixes: 3e50d2da5850 ("Add driver for Microchip LAN87XX T1 PHYs")
Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
v0->v1:
    - Add more details in the commit message and source comments.
    - Update to the latest initialization sequences.
    - Add access_ereg_modify_changed().
    - Fix access_ereg() to access SMI bank correctly.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/microchip_t1.c | 171 +++++++++++++++++++++++++++++++++
 1 file changed, 171 insertions(+)

diff --git a/drivers/net/phy/microchip_t1.c b/drivers/net/phy/microchip_t1.c
index 001def4509c29..fed3e395f18e1 100644
--- a/drivers/net/phy/microchip_t1.c
+++ b/drivers/net/phy/microchip_t1.c
@@ -3,9 +3,21 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/delay.h>
 #include <linux/mii.h>
 #include <linux/phy.h>
 
+/* External Register Control Register */
+#define LAN87XX_EXT_REG_CTL                     (0x14)
+#define LAN87XX_EXT_REG_CTL_RD_CTL              (0x1000)
+#define LAN87XX_EXT_REG_CTL_WR_CTL              (0x0800)
+
+/* External Register Read Data Register */
+#define LAN87XX_EXT_REG_RD_DATA                 (0x15)
+
+/* External Register Write Data Register */
+#define LAN87XX_EXT_REG_WR_DATA                 (0x16)
+
 /* Interrupt Source Register */
 #define LAN87XX_INTERRUPT_SOURCE                (0x18)
 
@@ -14,9 +26,160 @@
 #define LAN87XX_MASK_LINK_UP                    (0x0004)
 #define LAN87XX_MASK_LINK_DOWN                  (0x0002)
 
+/* phyaccess nested types */
+#define	PHYACC_ATTR_MODE_READ		0
+#define	PHYACC_ATTR_MODE_WRITE		1
+#define	PHYACC_ATTR_MODE_MODIFY		2
+
+#define	PHYACC_ATTR_BANK_SMI		0
+#define	PHYACC_ATTR_BANK_MISC		1
+#define	PHYACC_ATTR_BANK_PCS		2
+#define	PHYACC_ATTR_BANK_AFE		3
+#define	PHYACC_ATTR_BANK_MAX		7
+
 #define DRIVER_AUTHOR	"Nisar Sayed <nisar.sayed@microchip.com>"
 #define DRIVER_DESC	"Microchip LAN87XX T1 PHY driver"
 
+struct access_ereg_val {
+	u8  mode;
+	u8  bank;
+	u8  offset;
+	u16 val;
+	u16 mask;
+};
+
+static int access_ereg(struct phy_device *phydev, u8 mode, u8 bank,
+		       u8 offset, u16 val)
+{
+	u16 ereg = 0;
+	int rc = 0;
+
+	if (mode > PHYACC_ATTR_MODE_WRITE || bank > PHYACC_ATTR_BANK_MAX)
+		return -EINVAL;
+
+	if (bank == PHYACC_ATTR_BANK_SMI) {
+		if (mode == PHYACC_ATTR_MODE_WRITE)
+			rc = phy_write(phydev, offset, val);
+		else
+			rc = phy_read(phydev, offset);
+		return rc;
+	}
+
+	if (mode == PHYACC_ATTR_MODE_WRITE) {
+		ereg = LAN87XX_EXT_REG_CTL_WR_CTL;
+		rc = phy_write(phydev, LAN87XX_EXT_REG_WR_DATA, val);
+		if (rc < 0)
+			return rc;
+	} else {
+		ereg = LAN87XX_EXT_REG_CTL_RD_CTL;
+	}
+
+	ereg |= (bank << 8) | offset;
+
+	rc = phy_write(phydev, LAN87XX_EXT_REG_CTL, ereg);
+	if (rc < 0)
+		return rc;
+
+	if (mode == PHYACC_ATTR_MODE_READ)
+		rc = phy_read(phydev, LAN87XX_EXT_REG_RD_DATA);
+
+	return rc;
+}
+
+static int access_ereg_modify_changed(struct phy_device *phydev,
+				      u8 bank, u8 offset, u16 val, u16 mask)
+{
+	int new = 0, rc = 0;
+
+	if (bank > PHYACC_ATTR_BANK_MAX)
+		return -EINVAL;
+
+	rc = access_ereg(phydev, PHYACC_ATTR_MODE_READ, bank, offset, val);
+	if (rc < 0)
+		return rc;
+
+	new = val | (rc & (mask ^ 0xFFFF));
+	rc = access_ereg(phydev, PHYACC_ATTR_MODE_WRITE, bank, offset, new);
+
+	return rc;
+}
+
+static int lan87xx_phy_init(struct phy_device *phydev)
+{
+	static const struct access_ereg_val init[] = {
+		/* TX Amplitude = 5 */
+		{PHYACC_ATTR_MODE_MODIFY, PHYACC_ATTR_BANK_AFE, 0x0B,
+		 0x000A, 0x001E},
+		/* Clear SMI interrupts */
+		{PHYACC_ATTR_MODE_READ, PHYACC_ATTR_BANK_SMI, 0x18,
+		 0, 0},
+		/* Clear MISC interrupts */
+		{PHYACC_ATTR_MODE_READ, PHYACC_ATTR_BANK_MISC, 0x08,
+		 0, 0},
+		/* Turn on TC10 Ring Oscillator (ROSC) */
+		{PHYACC_ATTR_MODE_MODIFY, PHYACC_ATTR_BANK_MISC, 0x20,
+		 0x0020, 0x0020},
+		/* WUR Detect Length to 1.2uS, LPC Detect Length to 1.09uS */
+		{PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_PCS, 0x20,
+		 0x283C, 0},
+		/* Wake_In Debounce Length to 39uS, Wake_Out Length to 79uS */
+		{PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_MISC, 0x21,
+		 0x274F, 0},
+		/* Enable Auto Wake Forward to Wake_Out, ROSC on, Sleep,
+		 * and Wake_In to wake PHY
+		 */
+		{PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_MISC, 0x20,
+		 0x80A7, 0},
+		/* Enable WUP Auto Fwd, Enable Wake on MDI, Wakeup Debouncer
+		 * to 128 uS
+		 */
+		{PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_MISC, 0x24,
+		 0xF110, 0},
+		/* Enable HW Init */
+		{PHYACC_ATTR_MODE_MODIFY, PHYACC_ATTR_BANK_SMI, 0x1A,
+		 0x0100, 0x0100},
+	};
+	int rc, i;
+
+	/* Start manual initialization procedures in Managed Mode */
+	rc = access_ereg_modify_changed(phydev, PHYACC_ATTR_BANK_SMI,
+					0x1a, 0x0000, 0x0100);
+	if (rc < 0)
+		return rc;
+
+	/* Soft Reset the SMI block */
+	rc = access_ereg_modify_changed(phydev, PHYACC_ATTR_BANK_SMI,
+					0x00, 0x8000, 0x8000);
+	if (rc < 0)
+		return rc;
+
+	/* Check to see if the self-clearing bit is cleared */
+	usleep_range(1000, 2000);
+	rc = access_ereg(phydev, PHYACC_ATTR_MODE_READ,
+			 PHYACC_ATTR_BANK_SMI, 0x00, 0);
+	if (rc < 0)
+		return rc;
+	if ((rc & 0x8000) != 0)
+		return -ETIMEDOUT;
+
+	/* PHY Initialization */
+	for (i = 0; i < ARRAY_SIZE(init); i++) {
+		if (init[i].mode == PHYACC_ATTR_MODE_MODIFY) {
+			rc = access_ereg_modify_changed(phydev, init[i].bank,
+							init[i].offset,
+							init[i].val,
+							init[i].mask);
+		} else {
+			rc = access_ereg(phydev, init[i].mode, init[i].bank,
+					 init[i].offset, init[i].val);
+		}
+		if (rc < 0)
+			return rc;
+	}
+
+	return 0;
+}
+
 static int lan87xx_phy_config_intr(struct phy_device *phydev)
 {
 	int rc, val = 0;
@@ -40,6 +203,13 @@ static int lan87xx_phy_ack_interrupt(struct phy_device *phydev)
 	return rc < 0 ? rc : 0;
 }
 
+static int lan87xx_config_init(struct phy_device *phydev)
+{
+	int rc = lan87xx_phy_init(phydev);
+
+	return rc < 0 ? rc : 0;
+}
+
 static struct phy_driver microchip_t1_phy_driver[] = {
 	{
 		.phy_id         = 0x0007c150,
@@ -48,6 +218,7 @@ static struct phy_driver microchip_t1_phy_driver[] = {
 
 		.features       = PHY_BASIC_T1_FEATURES,
 
+		.config_init	= lan87xx_config_init,
 		.config_aneg    = genphy_config_aneg,
 
 		.ack_interrupt  = lan87xx_phy_ack_interrupt,
-- 
2.20.1

[PATCH 5.4 004/147] KVM: arm: vgic: Synchronize the whole guest on GIC{D,R}_I{S,C}ACTIVER read

[Greg Kroah-Hartman]

From: Marc Zyngier <maz@kernel.org>

[ Upstream commit 9a50ebbffa9862db7604345f5fd763122b0f6fed ]

When a guest tries to read the active state of its interrupts,
we currently just return whatever state we have in memory. This
means that if such an interrupt lives in a List Register on another
CPU, we fail to obsertve the latest active state for this interrupt.

In order to remedy this, stop all the other vcpus so that they exit
and we can observe the most recent value for the state. This is
similar to what we are doing for the write side of the same
registers, and results in new MMIO handlers for userspace (which
do not need to stop the guest, as it is supposed to be stopped
already).

Reported-by: Julien Grall <julien@xen.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 virt/kvm/arm/vgic/vgic-mmio-v2.c |   4 +-
 virt/kvm/arm/vgic/vgic-mmio-v3.c |  12 ++--
 virt/kvm/arm/vgic/vgic-mmio.c    | 100 ++++++++++++++++++++-----------
 virt/kvm/arm/vgic/vgic-mmio.h    |   3 +
 4 files changed, 75 insertions(+), 44 deletions(-)

diff --git a/virt/kvm/arm/vgic/vgic-mmio-v2.c b/virt/kvm/arm/vgic/vgic-mmio-v2.c
index 5945f062d7497..d63881f60e1a5 100644
--- a/virt/kvm/arm/vgic/vgic-mmio-v2.c
+++ b/virt/kvm/arm/vgic/vgic-mmio-v2.c
@@ -422,11 +422,11 @@ static const struct vgic_register_region vgic_v2_dist_registers[] = {
 		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_ACTIVE_SET,
 		vgic_mmio_read_active, vgic_mmio_write_sactive,
-		NULL, vgic_mmio_uaccess_write_sactive, 1,
+		vgic_uaccess_read_active, vgic_mmio_uaccess_write_sactive, 1,
 		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_ACTIVE_CLEAR,
 		vgic_mmio_read_active, vgic_mmio_write_cactive,
-		NULL, vgic_mmio_uaccess_write_cactive, 1,
+		vgic_uaccess_read_active, vgic_mmio_uaccess_write_cactive, 1,
 		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_PRI,
 		vgic_mmio_read_priority, vgic_mmio_write_priority, NULL, NULL,
diff --git a/virt/kvm/arm/vgic/vgic-mmio-v3.c b/virt/kvm/arm/vgic/vgic-mmio-v3.c
index 7dfd15dbb308e..4c5909e38f78a 100644
--- a/virt/kvm/arm/vgic/vgic-mmio-v3.c
+++ b/virt/kvm/arm/vgic/vgic-mmio-v3.c
@@ -491,11 +491,11 @@ static const struct vgic_register_region vgic_v3_dist_registers[] = {
 		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_ISACTIVER,
 		vgic_mmio_read_active, vgic_mmio_write_sactive,
-		NULL, vgic_mmio_uaccess_write_sactive, 1,
+		vgic_uaccess_read_active, vgic_mmio_uaccess_write_sactive, 1,
 		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_ICACTIVER,
 		vgic_mmio_read_active, vgic_mmio_write_cactive,
-		NULL, vgic_mmio_uaccess_write_cactive,
+		vgic_uaccess_read_active, vgic_mmio_uaccess_write_cactive,
 		1, VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_IPRIORITYR,
 		vgic_mmio_read_priority, vgic_mmio_write_priority, NULL, NULL,
@@ -563,12 +563,12 @@ static const struct vgic_register_region vgic_v3_rd_registers[] = {
 		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_LENGTH_UACCESS(SZ_64K + GICR_ISACTIVER0,
 		vgic_mmio_read_active, vgic_mmio_write_sactive,
-		NULL, vgic_mmio_uaccess_write_sactive,
-		4, VGIC_ACCESS_32bit),
+		vgic_uaccess_read_active, vgic_mmio_uaccess_write_sactive, 4,
+		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_LENGTH_UACCESS(SZ_64K + GICR_ICACTIVER0,
 		vgic_mmio_read_active, vgic_mmio_write_cactive,
-		NULL, vgic_mmio_uaccess_write_cactive,
-		4, VGIC_ACCESS_32bit),
+		vgic_uaccess_read_active, vgic_mmio_uaccess_write_cactive, 4,
+		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_LENGTH(SZ_64K + GICR_IPRIORITYR0,
 		vgic_mmio_read_priority, vgic_mmio_write_priority, 32,
 		VGIC_ACCESS_32bit | VGIC_ACCESS_8bit),
diff --git a/virt/kvm/arm/vgic/vgic-mmio.c b/virt/kvm/arm/vgic/vgic-mmio.c
index 7eacf00e5abeb..fb1dcd397b93a 100644
--- a/virt/kvm/arm/vgic/vgic-mmio.c
+++ b/virt/kvm/arm/vgic/vgic-mmio.c
@@ -300,8 +300,39 @@ void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu,
 	}
 }
 
-unsigned long vgic_mmio_read_active(struct kvm_vcpu *vcpu,
-				    gpa_t addr, unsigned int len)
+
+/*
+ * If we are fiddling with an IRQ's active state, we have to make sure the IRQ
+ * is not queued on some running VCPU's LRs, because then the change to the
+ * active state can be overwritten when the VCPU's state is synced coming back
+ * from the guest.
+ *
+ * For shared interrupts as well as GICv3 private interrupts, we have to
+ * stop all the VCPUs because interrupts can be migrated while we don't hold
+ * the IRQ locks and we don't want to be chasing moving targets.
+ *
+ * For GICv2 private interrupts we don't have to do anything because
+ * userspace accesses to the VGIC state already require all VCPUs to be
+ * stopped, and only the VCPU itself can modify its private interrupts
+ * active state, which guarantees that the VCPU is not running.
+ */
+static void vgic_access_active_prepare(struct kvm_vcpu *vcpu, u32 intid)
+{
+	if (vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3 ||
+	    intid >= VGIC_NR_PRIVATE_IRQS)
+		kvm_arm_halt_guest(vcpu->kvm);
+}
+
+/* See vgic_access_active_prepare */
+static void vgic_access_active_finish(struct kvm_vcpu *vcpu, u32 intid)
+{
+	if (vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3 ||
+	    intid >= VGIC_NR_PRIVATE_IRQS)
+		kvm_arm_resume_guest(vcpu->kvm);
+}
+
+static unsigned long __vgic_mmio_read_active(struct kvm_vcpu *vcpu,
+					     gpa_t addr, unsigned int len)
 {
 	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
 	u32 value = 0;
@@ -311,6 +342,10 @@ unsigned long vgic_mmio_read_active(struct kvm_vcpu *vcpu,
 	for (i = 0; i < len * 8; i++) {
 		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
 
+		/*
+		 * Even for HW interrupts, don't evaluate the HW state as
+		 * all the guest is interested in is the virtual state.
+		 */
 		if (irq->active)
 			value |= (1U << i);
 
@@ -320,6 +355,29 @@ unsigned long vgic_mmio_read_active(struct kvm_vcpu *vcpu,
 	return value;
 }
 
+unsigned long vgic_mmio_read_active(struct kvm_vcpu *vcpu,
+				    gpa_t addr, unsigned int len)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+	u32 val;
+
+	mutex_lock(&vcpu->kvm->lock);
+	vgic_access_active_prepare(vcpu, intid);
+
+	val = __vgic_mmio_read_active(vcpu, addr, len);
+
+	vgic_access_active_finish(vcpu, intid);
+	mutex_unlock(&vcpu->kvm->lock);
+
+	return val;
+}
+
+unsigned long vgic_uaccess_read_active(struct kvm_vcpu *vcpu,
+				    gpa_t addr, unsigned int len)
+{
+	return __vgic_mmio_read_active(vcpu, addr, len);
+}
+
 /* Must be called with irq->irq_lock held */
 static void vgic_hw_irq_change_active(struct kvm_vcpu *vcpu, struct vgic_irq *irq,
 				      bool active, bool is_uaccess)
@@ -371,36 +429,6 @@ static void vgic_mmio_change_active(struct kvm_vcpu *vcpu, struct vgic_irq *irq,
 		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
 }
 
-/*
- * If we are fiddling with an IRQ's active state, we have to make sure the IRQ
- * is not queued on some running VCPU's LRs, because then the change to the
- * active state can be overwritten when the VCPU's state is synced coming back
- * from the guest.
- *
- * For shared interrupts, we have to stop all the VCPUs because interrupts can
- * be migrated while we don't hold the IRQ locks and we don't want to be
- * chasing moving targets.
- *
- * For private interrupts we don't have to do anything because userspace
- * accesses to the VGIC state already require all VCPUs to be stopped, and
- * only the VCPU itself can modify its private interrupts active state, which
- * guarantees that the VCPU is not running.
- */
-static void vgic_change_active_prepare(struct kvm_vcpu *vcpu, u32 intid)
-{
-	if (vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3 ||
-	    intid >= VGIC_NR_PRIVATE_IRQS)
-		kvm_arm_halt_guest(vcpu->kvm);
-}
-
-/* See vgic_change_active_prepare */
-static void vgic_change_active_finish(struct kvm_vcpu *vcpu, u32 intid)
-{
-	if (vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3 ||
-	    intid >= VGIC_NR_PRIVATE_IRQS)
-		kvm_arm_resume_guest(vcpu->kvm);
-}
-
 static void __vgic_mmio_write_cactive(struct kvm_vcpu *vcpu,
 				      gpa_t addr, unsigned int len,
 				      unsigned long val)
@@ -422,11 +450,11 @@ void vgic_mmio_write_cactive(struct kvm_vcpu *vcpu,
 	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
 
 	mutex_lock(&vcpu->kvm->lock);
-	vgic_change_active_prepare(vcpu, intid);
+	vgic_access_active_prepare(vcpu, intid);
 
 	__vgic_mmio_write_cactive(vcpu, addr, len, val);
 
-	vgic_change_active_finish(vcpu, intid);
+	vgic_access_active_finish(vcpu, intid);
 	mutex_unlock(&vcpu->kvm->lock);
 }
 
@@ -459,11 +487,11 @@ void vgic_mmio_write_sactive(struct kvm_vcpu *vcpu,
 	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
 
 	mutex_lock(&vcpu->kvm->lock);
-	vgic_change_active_prepare(vcpu, intid);
+	vgic_access_active_prepare(vcpu, intid);
 
 	__vgic_mmio_write_sactive(vcpu, addr, len, val);
 
-	vgic_change_active_finish(vcpu, intid);
+	vgic_access_active_finish(vcpu, intid);
 	mutex_unlock(&vcpu->kvm->lock);
 }
 
diff --git a/virt/kvm/arm/vgic/vgic-mmio.h b/virt/kvm/arm/vgic/vgic-mmio.h
index 836f418f1ee80..b6aff52524299 100644
--- a/virt/kvm/arm/vgic/vgic-mmio.h
+++ b/virt/kvm/arm/vgic/vgic-mmio.h
@@ -157,6 +157,9 @@ void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu,
 unsigned long vgic_mmio_read_active(struct kvm_vcpu *vcpu,
 				    gpa_t addr, unsigned int len);
 
+unsigned long vgic_uaccess_read_active(struct kvm_vcpu *vcpu,
+				    gpa_t addr, unsigned int len);
+
 void vgic_mmio_write_cactive(struct kvm_vcpu *vcpu,
 			     gpa_t addr, unsigned int len,
 			     unsigned long val);
-- 
2.20.1

[PATCH 5.4 005/147] gpio: pca953x: Fix pca953x_gpio_set_config

[Greg Kroah-Hartman]

From: Adam Ford <aford173@gmail.com>

[ Upstream commit dc87f6dd058a648cd2a35e4aa04592dccdc9f0c2 ]

pca953x_gpio_set_config is setup to support pull-up/down
bias.  Currently the driver uses a variable called 'config' to
determine which options to use.  Unfortunately, this is incorrect.

This patch uses function pinconf_to_config_param(config), which
converts this 'config' parameter back to pinconfig to determine
which option to use.

Fixes: 15add06841a3 ("gpio: pca953x: add ->set_config implementation")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-pca953x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index de5d1383f28da..3edc1762803ac 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -528,7 +528,7 @@ static int pca953x_gpio_set_config(struct gpio_chip *gc, unsigned int offset,
 {
 	struct pca953x_chip *chip = gpiochip_get_data(gc);
 
-	switch (config) {
+	switch (pinconf_to_config_param(config)) {
 	case PIN_CONFIG_BIAS_PULL_UP:
 	case PIN_CONFIG_BIAS_PULL_DOWN:
 		return pca953x_gpio_set_pull_up_down(chip, offset, config);
-- 
2.20.1

[PATCH 5.4 006/147] SUNRPC: Add "@len" parameter to gss_unwrap()

[Greg Kroah-Hartman]

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit 31c9590ae468478fe47dc0f5f0d3562b2f69450e ]

Refactor: This is a pre-requisite to fixing the client-side ralign
computation in gss_unwrap_resp_priv().

The length value is passed in explicitly rather that as the value
of buf->len. This will subsequently allow gss_unwrap_kerberos_v1()
to compute a slack and align value, instead of computing it in
gss_unwrap_resp_priv().

Fixes: 35e77d21baa0 ("SUNRPC: Add rpc_auth::au_ralign field")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/sunrpc/gss_api.h        |  2 ++
 include/linux/sunrpc/gss_krb5.h       |  6 +++---
 net/sunrpc/auth_gss/auth_gss.c        |  4 ++--
 net/sunrpc/auth_gss/gss_krb5_crypto.c |  8 ++++----
 net/sunrpc/auth_gss/gss_krb5_wrap.c   | 26 +++++++++++++++-----------
 net/sunrpc/auth_gss/gss_mech_switch.c |  3 ++-
 net/sunrpc/auth_gss/svcauth_gss.c     |  8 ++------
 7 files changed, 30 insertions(+), 27 deletions(-)

diff --git a/include/linux/sunrpc/gss_api.h b/include/linux/sunrpc/gss_api.h
index 5ac5db4d295f9..d1c6f65de76e7 100644
--- a/include/linux/sunrpc/gss_api.h
+++ b/include/linux/sunrpc/gss_api.h
@@ -67,6 +67,7 @@ u32 gss_wrap(
 u32 gss_unwrap(
 		struct gss_ctx		*ctx_id,
 		int			offset,
+		int			len,
 		struct xdr_buf		*inbuf);
 u32 gss_delete_sec_context(
 		struct gss_ctx		**ctx_id);
@@ -127,6 +128,7 @@ struct gss_api_ops {
 	u32 (*gss_unwrap)(
 			struct gss_ctx		*ctx_id,
 			int			offset,
+			int			len,
 			struct xdr_buf		*buf);
 	void (*gss_delete_sec_context)(
 			void			*internal_ctx_id);
diff --git a/include/linux/sunrpc/gss_krb5.h b/include/linux/sunrpc/gss_krb5.h
index 02c0412e368cc..07930bc9ad604 100644
--- a/include/linux/sunrpc/gss_krb5.h
+++ b/include/linux/sunrpc/gss_krb5.h
@@ -83,7 +83,7 @@ struct gss_krb5_enctype {
 	u32 (*encrypt_v2) (struct krb5_ctx *kctx, u32 offset,
 			   struct xdr_buf *buf,
 			   struct page **pages); /* v2 encryption function */
-	u32 (*decrypt_v2) (struct krb5_ctx *kctx, u32 offset,
+	u32 (*decrypt_v2) (struct krb5_ctx *kctx, u32 offset, u32 len,
 			   struct xdr_buf *buf, u32 *headskip,
 			   u32 *tailskip);	/* v2 decryption function */
 };
@@ -255,7 +255,7 @@ gss_wrap_kerberos(struct gss_ctx *ctx_id, int offset,
 		struct xdr_buf *outbuf, struct page **pages);
 
 u32
-gss_unwrap_kerberos(struct gss_ctx *ctx_id, int offset,
+gss_unwrap_kerberos(struct gss_ctx *ctx_id, int offset, int len,
 		struct xdr_buf *buf);
 
 
@@ -312,7 +312,7 @@ gss_krb5_aes_encrypt(struct krb5_ctx *kctx, u32 offset,
 		     struct page **pages);
 
 u32
-gss_krb5_aes_decrypt(struct krb5_ctx *kctx, u32 offset,
+gss_krb5_aes_decrypt(struct krb5_ctx *kctx, u32 offset, u32 len,
 		     struct xdr_buf *buf, u32 *plainoffset,
 		     u32 *plainlen);
 
diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index ff5fcb3e12084..c8782f4e20ec2 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -2041,9 +2041,9 @@ gss_unwrap_resp_priv(struct rpc_task *task, struct rpc_cred *cred,
 	offset = (u8 *)(p) - (u8 *)head->iov_base;
 	if (offset + opaque_len > rcv_buf->len)
 		goto unwrap_failed;
-	rcv_buf->len = offset + opaque_len;
 
-	maj_stat = gss_unwrap(ctx->gc_gss_ctx, offset, rcv_buf);
+	maj_stat = gss_unwrap(ctx->gc_gss_ctx, offset,
+			      offset + opaque_len, rcv_buf);
 	if (maj_stat == GSS_S_CONTEXT_EXPIRED)
 		clear_bit(RPCAUTH_CRED_UPTODATE, &cred->cr_flags);
 	if (maj_stat != GSS_S_COMPLETE)
diff --git a/net/sunrpc/auth_gss/gss_krb5_crypto.c b/net/sunrpc/auth_gss/gss_krb5_crypto.c
index 6f2d30d7b766d..e7180da1fc6a1 100644
--- a/net/sunrpc/auth_gss/gss_krb5_crypto.c
+++ b/net/sunrpc/auth_gss/gss_krb5_crypto.c
@@ -851,8 +851,8 @@ gss_krb5_aes_encrypt(struct krb5_ctx *kctx, u32 offset,
 }
 
 u32
-gss_krb5_aes_decrypt(struct krb5_ctx *kctx, u32 offset, struct xdr_buf *buf,
-		     u32 *headskip, u32 *tailskip)
+gss_krb5_aes_decrypt(struct krb5_ctx *kctx, u32 offset, u32 len,
+		     struct xdr_buf *buf, u32 *headskip, u32 *tailskip)
 {
 	struct xdr_buf subbuf;
 	u32 ret = 0;
@@ -881,7 +881,7 @@ gss_krb5_aes_decrypt(struct krb5_ctx *kctx, u32 offset, struct xdr_buf *buf,
 
 	/* create a segment skipping the header and leaving out the checksum */
 	xdr_buf_subsegment(buf, &subbuf, offset + GSS_KRB5_TOK_HDR_LEN,
-				    (buf->len - offset - GSS_KRB5_TOK_HDR_LEN -
+				    (len - offset - GSS_KRB5_TOK_HDR_LEN -
 				     kctx->gk5e->cksumlength));
 
 	nblocks = (subbuf.len + blocksize - 1) / blocksize;
@@ -926,7 +926,7 @@ gss_krb5_aes_decrypt(struct krb5_ctx *kctx, u32 offset, struct xdr_buf *buf,
 		goto out_err;
 
 	/* Get the packet's hmac value */
-	ret = read_bytes_from_xdr_buf(buf, buf->len - kctx->gk5e->cksumlength,
+	ret = read_bytes_from_xdr_buf(buf, len - kctx->gk5e->cksumlength,
 				      pkt_hmac, kctx->gk5e->cksumlength);
 	if (ret)
 		goto out_err;
diff --git a/net/sunrpc/auth_gss/gss_krb5_wrap.c b/net/sunrpc/auth_gss/gss_krb5_wrap.c
index 14a0aff0cd84c..a7cafc29d61ee 100644
--- a/net/sunrpc/auth_gss/gss_krb5_wrap.c
+++ b/net/sunrpc/auth_gss/gss_krb5_wrap.c
@@ -261,7 +261,8 @@ gss_wrap_kerberos_v1(struct krb5_ctx *kctx, int offset,
 }
 
 static u32
-gss_unwrap_kerberos_v1(struct krb5_ctx *kctx, int offset, struct xdr_buf *buf)
+gss_unwrap_kerberos_v1(struct krb5_ctx *kctx, int offset, int len,
+		       struct xdr_buf *buf)
 {
 	int			signalg;
 	int			sealalg;
@@ -284,7 +285,7 @@ gss_unwrap_kerberos_v1(struct krb5_ctx *kctx, int offset, struct xdr_buf *buf)
 
 	ptr = (u8 *)buf->head[0].iov_base + offset;
 	if (g_verify_token_header(&kctx->mech_used, &bodysize, &ptr,
-					buf->len - offset))
+					len - offset))
 		return GSS_S_DEFECTIVE_TOKEN;
 
 	if ((ptr[0] != ((KG_TOK_WRAP_MSG >> 8) & 0xff)) ||
@@ -324,6 +325,7 @@ gss_unwrap_kerberos_v1(struct krb5_ctx *kctx, int offset, struct xdr_buf *buf)
 	    (!kctx->initiate && direction != 0))
 		return GSS_S_BAD_SIG;
 
+	buf->len = len;
 	if (kctx->enctype == ENCTYPE_ARCFOUR_HMAC) {
 		struct crypto_sync_skcipher *cipher;
 		int err;
@@ -376,7 +378,7 @@ gss_unwrap_kerberos_v1(struct krb5_ctx *kctx, int offset, struct xdr_buf *buf)
 	data_len = (buf->head[0].iov_base + buf->head[0].iov_len) - data_start;
 	memmove(orig_start, data_start, data_len);
 	buf->head[0].iov_len -= (data_start - orig_start);
-	buf->len -= (data_start - orig_start);
+	buf->len = len - (data_start - orig_start);
 
 	if (gss_krb5_remove_padding(buf, blocksize))
 		return GSS_S_DEFECTIVE_TOKEN;
@@ -486,7 +488,8 @@ gss_wrap_kerberos_v2(struct krb5_ctx *kctx, u32 offset,
 }
 
 static u32
-gss_unwrap_kerberos_v2(struct krb5_ctx *kctx, int offset, struct xdr_buf *buf)
+gss_unwrap_kerberos_v2(struct krb5_ctx *kctx, int offset, int len,
+		       struct xdr_buf *buf)
 {
 	s32		now;
 	u8		*ptr;
@@ -532,7 +535,7 @@ gss_unwrap_kerberos_v2(struct krb5_ctx *kctx, int offset, struct xdr_buf *buf)
 	if (rrc != 0)
 		rotate_left(offset + 16, buf, rrc);
 
-	err = (*kctx->gk5e->decrypt_v2)(kctx, offset, buf,
+	err = (*kctx->gk5e->decrypt_v2)(kctx, offset, len, buf,
 					&headskip, &tailskip);
 	if (err)
 		return GSS_S_FAILURE;
@@ -542,7 +545,7 @@ gss_unwrap_kerberos_v2(struct krb5_ctx *kctx, int offset, struct xdr_buf *buf)
 	 * it against the original
 	 */
 	err = read_bytes_from_xdr_buf(buf,
-				buf->len - GSS_KRB5_TOK_HDR_LEN - tailskip,
+				len - GSS_KRB5_TOK_HDR_LEN - tailskip,
 				decrypted_hdr, GSS_KRB5_TOK_HDR_LEN);
 	if (err) {
 		dprintk("%s: error %u getting decrypted_hdr\n", __func__, err);
@@ -568,14 +571,14 @@ gss_unwrap_kerberos_v2(struct krb5_ctx *kctx, int offset, struct xdr_buf *buf)
 	 * Note that buf->head[0].iov_len may indicate the available
 	 * head buffer space rather than that actually occupied.
 	 */
-	movelen = min_t(unsigned int, buf->head[0].iov_len, buf->len);
+	movelen = min_t(unsigned int, buf->head[0].iov_len, len);
 	movelen -= offset + GSS_KRB5_TOK_HDR_LEN + headskip;
 	if (offset + GSS_KRB5_TOK_HDR_LEN + headskip + movelen >
 	    buf->head[0].iov_len)
 		return GSS_S_FAILURE;
 	memmove(ptr, ptr + GSS_KRB5_TOK_HDR_LEN + headskip, movelen);
 	buf->head[0].iov_len -= GSS_KRB5_TOK_HDR_LEN + headskip;
-	buf->len -= GSS_KRB5_TOK_HDR_LEN + headskip;
+	buf->len = len - GSS_KRB5_TOK_HDR_LEN + headskip;
 
 	/* Trim off the trailing "extra count" and checksum blob */
 	buf->len -= ec + GSS_KRB5_TOK_HDR_LEN + tailskip;
@@ -603,7 +606,8 @@ gss_wrap_kerberos(struct gss_ctx *gctx, int offset,
 }
 
 u32
-gss_unwrap_kerberos(struct gss_ctx *gctx, int offset, struct xdr_buf *buf)
+gss_unwrap_kerberos(struct gss_ctx *gctx, int offset,
+		    int len, struct xdr_buf *buf)
 {
 	struct krb5_ctx	*kctx = gctx->internal_ctx_id;
 
@@ -613,9 +617,9 @@ gss_unwrap_kerberos(struct gss_ctx *gctx, int offset, struct xdr_buf *buf)
 	case ENCTYPE_DES_CBC_RAW:
 	case ENCTYPE_DES3_CBC_RAW:
 	case ENCTYPE_ARCFOUR_HMAC:
-		return gss_unwrap_kerberos_v1(kctx, offset, buf);
+		return gss_unwrap_kerberos_v1(kctx, offset, len, buf);
 	case ENCTYPE_AES128_CTS_HMAC_SHA1_96:
 	case ENCTYPE_AES256_CTS_HMAC_SHA1_96:
-		return gss_unwrap_kerberos_v2(kctx, offset, buf);
+		return gss_unwrap_kerberos_v2(kctx, offset, len, buf);
 	}
 }
diff --git a/net/sunrpc/auth_gss/gss_mech_switch.c b/net/sunrpc/auth_gss/gss_mech_switch.c
index 82060099a4291..8fa924c8e282c 100644
--- a/net/sunrpc/auth_gss/gss_mech_switch.c
+++ b/net/sunrpc/auth_gss/gss_mech_switch.c
@@ -438,10 +438,11 @@ gss_wrap(struct gss_ctx	*ctx_id,
 u32
 gss_unwrap(struct gss_ctx	*ctx_id,
 	   int			offset,
+	   int			len,
 	   struct xdr_buf	*buf)
 {
 	return ctx_id->mech_type->gm_ops
-		->gss_unwrap(ctx_id, offset, buf);
+		->gss_unwrap(ctx_id, offset, len, buf);
 }
 
 
diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c
index ed20fa8a6f707..ab3a9c49a859a 100644
--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -925,7 +925,7 @@ static int
 unwrap_priv_data(struct svc_rqst *rqstp, struct xdr_buf *buf, u32 seq, struct gss_ctx *ctx)
 {
 	u32 priv_len, maj_stat;
-	int pad, saved_len, remaining_len, offset;
+	int pad, remaining_len, offset;
 
 	clear_bit(RQ_SPLICE_OK, &rqstp->rq_flags);
 
@@ -945,12 +945,8 @@ unwrap_priv_data(struct svc_rqst *rqstp, struct xdr_buf *buf, u32 seq, struct gs
 	buf->len -= pad;
 	fix_priv_head(buf, pad);
 
-	/* Maybe it would be better to give gss_unwrap a length parameter: */
-	saved_len = buf->len;
-	buf->len = priv_len;
-	maj_stat = gss_unwrap(ctx, 0, buf);
+	maj_stat = gss_unwrap(ctx, 0, priv_len, buf);
 	pad = priv_len - buf->len;
-	buf->len = saved_len;
 	buf->len -= pad;
 	/* The upper layers assume the buffer is aligned on 4-byte boundaries.
 	 * In the krb5p case, at least, the data ends up offset, so we need to
-- 
2.20.1

[PATCH 5.4 007/147] SUNRPC: Fix GSS privacy computation of auth->au_ralign

[Greg Kroah-Hartman]

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit a7e429a6fa6d612d1dacde96c885dc1bb4a9f400 ]

When the au_ralign field was added to gss_unwrap_resp_priv, the
wrong calculation was used. Setting au_rslack == au_ralign is
probably correct for kerberos_v1 privacy, but kerberos_v2 privacy
adds additional GSS data after the clear text RPC message.
au_ralign needs to be smaller than au_rslack in that fairly common
case.

When xdr_buf_trim() is restored to gss_unwrap_kerberos_v2(), it does
exactly what I feared it would: it trims off part of the clear text
RPC message. However, that's because rpc_prepare_reply_pages() does
not set up the rq_rcv_buf's tail correctly because au_ralign is too
large.

Fixing the au_ralign computation also corrects the alignment of
rq_rcv_buf->pages so that the client does not have to shift reply
data payloads after they are received.

Fixes: 35e77d21baa0 ("SUNRPC: Add rpc_auth::au_ralign field")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/sunrpc/gss_api.h      |  1 +
 net/sunrpc/auth_gss/auth_gss.c      |  8 +++-----
 net/sunrpc/auth_gss/gss_krb5_wrap.c | 19 +++++++++++++++----
 3 files changed, 19 insertions(+), 9 deletions(-)

diff --git a/include/linux/sunrpc/gss_api.h b/include/linux/sunrpc/gss_api.h
index d1c6f65de76e7..d4326d6662a44 100644
--- a/include/linux/sunrpc/gss_api.h
+++ b/include/linux/sunrpc/gss_api.h
@@ -22,6 +22,7 @@
 struct gss_ctx {
 	struct gss_api_mech	*mech_type;
 	void			*internal_ctx_id;
+	unsigned int		slack, align;
 };
 
 #define GSS_C_NO_BUFFER		((struct xdr_netobj) 0)
diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index c8782f4e20ec2..5fc6c028f89c0 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -2030,7 +2030,6 @@ gss_unwrap_resp_priv(struct rpc_task *task, struct rpc_cred *cred,
 	struct xdr_buf *rcv_buf = &rqstp->rq_rcv_buf;
 	struct kvec *head = rqstp->rq_rcv_buf.head;
 	struct rpc_auth *auth = cred->cr_auth;
-	unsigned int savedlen = rcv_buf->len;
 	u32 offset, opaque_len, maj_stat;
 	__be32 *p;
 
@@ -2057,10 +2056,9 @@ gss_unwrap_resp_priv(struct rpc_task *task, struct rpc_cred *cred,
 	 */
 	xdr_init_decode(xdr, rcv_buf, p, rqstp);
 
-	auth->au_rslack = auth->au_verfsize + 2 +
-			  XDR_QUADLEN(savedlen - rcv_buf->len);
-	auth->au_ralign = auth->au_verfsize + 2 +
-			  XDR_QUADLEN(savedlen - rcv_buf->len);
+	auth->au_rslack = auth->au_verfsize + 2 + ctx->gc_gss_ctx->slack;
+	auth->au_ralign = auth->au_verfsize + 2 + ctx->gc_gss_ctx->align;
+
 	return 0;
 unwrap_failed:
 	trace_rpcgss_unwrap_failed(task);
diff --git a/net/sunrpc/auth_gss/gss_krb5_wrap.c b/net/sunrpc/auth_gss/gss_krb5_wrap.c
index a7cafc29d61ee..644ecb26100aa 100644
--- a/net/sunrpc/auth_gss/gss_krb5_wrap.c
+++ b/net/sunrpc/auth_gss/gss_krb5_wrap.c
@@ -262,7 +262,8 @@ gss_wrap_kerberos_v1(struct krb5_ctx *kctx, int offset,
 
 static u32
 gss_unwrap_kerberos_v1(struct krb5_ctx *kctx, int offset, int len,
-		       struct xdr_buf *buf)
+		       struct xdr_buf *buf, unsigned int *slack,
+		       unsigned int *align)
 {
 	int			signalg;
 	int			sealalg;
@@ -280,6 +281,7 @@ gss_unwrap_kerberos_v1(struct krb5_ctx *kctx, int offset, int len,
 	u32			conflen = kctx->gk5e->conflen;
 	int			crypt_offset;
 	u8			*cksumkey;
+	unsigned int		saved_len = buf->len;
 
 	dprintk("RPC:       gss_unwrap_kerberos\n");
 
@@ -383,6 +385,10 @@ gss_unwrap_kerberos_v1(struct krb5_ctx *kctx, int offset, int len,
 	if (gss_krb5_remove_padding(buf, blocksize))
 		return GSS_S_DEFECTIVE_TOKEN;
 
+	/* slack must include room for krb5 padding */
+	*slack = XDR_QUADLEN(saved_len - buf->len);
+	/* The GSS blob always precedes the RPC message payload */
+	*align = *slack;
 	return GSS_S_COMPLETE;
 }
 
@@ -489,7 +495,8 @@ gss_wrap_kerberos_v2(struct krb5_ctx *kctx, u32 offset,
 
 static u32
 gss_unwrap_kerberos_v2(struct krb5_ctx *kctx, int offset, int len,
-		       struct xdr_buf *buf)
+		       struct xdr_buf *buf, unsigned int *slack,
+		       unsigned int *align)
 {
 	s32		now;
 	u8		*ptr;
@@ -583,6 +590,8 @@ gss_unwrap_kerberos_v2(struct krb5_ctx *kctx, int offset, int len,
 	/* Trim off the trailing "extra count" and checksum blob */
 	buf->len -= ec + GSS_KRB5_TOK_HDR_LEN + tailskip;
 
+	*align = XDR_QUADLEN(GSS_KRB5_TOK_HDR_LEN + headskip);
+	*slack = *align + XDR_QUADLEN(ec + GSS_KRB5_TOK_HDR_LEN + tailskip);
 	return GSS_S_COMPLETE;
 }
 
@@ -617,9 +626,11 @@ gss_unwrap_kerberos(struct gss_ctx *gctx, int offset,
 	case ENCTYPE_DES_CBC_RAW:
 	case ENCTYPE_DES3_CBC_RAW:
 	case ENCTYPE_ARCFOUR_HMAC:
-		return gss_unwrap_kerberos_v1(kctx, offset, len, buf);
+		return gss_unwrap_kerberos_v1(kctx, offset, len, buf,
+					      &gctx->slack, &gctx->align);
 	case ENCTYPE_AES128_CTS_HMAC_SHA1_96:
 	case ENCTYPE_AES256_CTS_HMAC_SHA1_96:
-		return gss_unwrap_kerberos_v2(kctx, offset, len, buf);
+		return gss_unwrap_kerberos_v2(kctx, offset, len, buf,
+					      &gctx->slack, &gctx->align);
 	}
 }
-- 
2.20.1

[PATCH 5.4 008/147] net/sonic: Fix a resource leak in an error handling path in jazz_sonic_probe()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 10e3cc180e64385edc9890c6855acf5ed9ca1339 ]

A call to 'dma_alloc_coherent()' is hidden in 'sonic_alloc_descriptors()',
called from 'sonic_probe1()'.

This is correctly freed in the remove function, but not in the error
handling path of the probe function.
Fix it and add the missing 'dma_free_coherent()' call.

While at it, rename a label in order to be slightly more informative.

Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/natsemi/jazzsonic.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/natsemi/jazzsonic.c b/drivers/net/ethernet/natsemi/jazzsonic.c
index 51fa82b429a3c..40970352d2082 100644
--- a/drivers/net/ethernet/natsemi/jazzsonic.c
+++ b/drivers/net/ethernet/natsemi/jazzsonic.c
@@ -235,11 +235,13 @@ static int jazz_sonic_probe(struct platform_device *pdev)
 
 	err = register_netdev(dev);
 	if (err)
-		goto out1;
+		goto undo_probe1;
 
 	return 0;
 
-out1:
+undo_probe1:
+	dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+			  lp->descriptors, lp->descriptors_laddr);
 	release_mem_region(dev->base_addr, SONIC_MEM_SIZE);
 out:
 	free_netdev(dev);
-- 
2.20.1

[PATCH 5.4 009/147] net: moxa: Fix a potential double free_irq()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit ee8d2267f0e39a1bfd95532da3a6405004114b27 ]

Should an irq requested with 'devm_request_irq' be released explicitly,
it should be done by 'devm_free_irq()', not 'free_irq()'.

Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/moxa/moxart_ether.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/moxa/moxart_ether.c b/drivers/net/ethernet/moxa/moxart_ether.c
index e1651756bf9da..f70bb81e1ed65 100644
--- a/drivers/net/ethernet/moxa/moxart_ether.c
+++ b/drivers/net/ethernet/moxa/moxart_ether.c
@@ -564,7 +564,7 @@ static int moxart_remove(struct platform_device *pdev)
 	struct net_device *ndev = platform_get_drvdata(pdev);
 
 	unregister_netdev(ndev);
-	free_irq(ndev->irq, ndev);
+	devm_free_irq(&pdev->dev, ndev->irq, ndev);
 	moxart_mac_free_memory(ndev);
 	free_netdev(ndev);
 
-- 
2.20.1

[PATCH 5.4 010/147] ftrace/selftests: workaround cgroup RT scheduling issues

[Greg Kroah-Hartman]

From: Alan Maguire <alan.maguire@oracle.com>

[ Upstream commit 57c4cfd4a2eef8f94052bd7c0fce0981f74fb213 ]

wakeup_rt.tc and wakeup.tc tests in tracers/ subdirectory
fail due to the chrt command returning:

 chrt: failed to set pid 0's policy: Operation not permitted.

To work around this, temporarily disable grout RT scheduling
during ftracetest execution.  Restore original value on
test run completion.  With these changes in place, both
tests consistently pass.

Fixes: c575dea2c1a5 ("selftests/ftrace: Add wakeup_rt tracer testcase")
Fixes: c1edd060b413 ("selftests/ftrace: Add wakeup tracer testcase")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/ftrace/ftracetest | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/tools/testing/selftests/ftrace/ftracetest b/tools/testing/selftests/ftrace/ftracetest
index 063ecb290a5a3..144308a757b70 100755
--- a/tools/testing/selftests/ftrace/ftracetest
+++ b/tools/testing/selftests/ftrace/ftracetest
@@ -29,8 +29,25 @@ err_ret=1
 # kselftest skip code is 4
 err_skip=4
 
+# cgroup RT scheduling prevents chrt commands from succeeding, which
+# induces failures in test wakeup tests.  Disable for the duration of
+# the tests.
+
+readonly sched_rt_runtime=/proc/sys/kernel/sched_rt_runtime_us
+
+sched_rt_runtime_orig=$(cat $sched_rt_runtime)
+
+setup() {
+  echo -1 > $sched_rt_runtime
+}
+
+cleanup() {
+  echo $sched_rt_runtime_orig > $sched_rt_runtime
+}
+
 errexit() { # message
   echo "Error: $1" 1>&2
+  cleanup
   exit $err_ret
 }
 
@@ -39,6 +56,8 @@ if [ `id -u` -ne 0 ]; then
   errexit "this must be run by root user"
 fi
 
+setup
+
 # Utilities
 absdir() { # file_path
   (cd `dirname $1`; pwd)
@@ -235,6 +254,7 @@ TOTAL_RESULT=0
 
 INSTANCE=
 CASENO=0
+
 testcase() { # testfile
   CASENO=$((CASENO+1))
   desc=`grep "^#[ \t]*description:" $1 | cut -f2 -d:`
@@ -406,5 +426,7 @@ prlog "# of unsupported: " `echo $UNSUPPORTED_CASES | wc -w`
 prlog "# of xfailed: " `echo $XFAILED_CASES | wc -w`
 prlog "# of undefined(test bug): " `echo $UNDEFINED_CASES | wc -w`
 
+cleanup
+
 # if no error, return 0
 exit $TOTAL_RESULT
-- 
2.20.1

[PATCH 5.4 011/147] drop_monitor: work around gcc-10 stringop-overflow warning

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit dc30b4059f6e2abf3712ab537c8718562b21c45d ]

The current gcc-10 snapshot produces a false-positive warning:

net/core/drop_monitor.c: In function 'trace_drop_common.constprop':
cc1: error: writing 8 bytes into a region of size 0 [-Werror=stringop-overflow=]
In file included from net/core/drop_monitor.c:23:
include/uapi/linux/net_dropmon.h:36:8: note: at offset 0 to object 'entries' with size 4 declared here
   36 |  __u32 entries;
      |        ^~~~~~~

I reported this in the gcc bugzilla, but in case it does not get
fixed in the release, work around it by using a temporary variable.

Fixes: 9a8afc8d3962 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol")
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94881
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/drop_monitor.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c
index 246a258b1fac2..af0130039f377 100644
--- a/net/core/drop_monitor.c
+++ b/net/core/drop_monitor.c
@@ -212,6 +212,7 @@ static void sched_send_work(struct timer_list *t)
 static void trace_drop_common(struct sk_buff *skb, void *location)
 {
 	struct net_dm_alert_msg *msg;
+	struct net_dm_drop_point *point;
 	struct nlmsghdr *nlh;
 	struct nlattr *nla;
 	int i;
@@ -230,11 +231,13 @@ static void trace_drop_common(struct sk_buff *skb, void *location)
 	nlh = (struct nlmsghdr *)dskb->data;
 	nla = genlmsg_data(nlmsg_data(nlh));
 	msg = nla_data(nla);
+	point = msg->points;
 	for (i = 0; i < msg->entries; i++) {
-		if (!memcmp(&location, msg->points[i].pc, sizeof(void *))) {
-			msg->points[i].count++;
+		if (!memcmp(&location, &point->pc, sizeof(void *))) {
+			point->count++;
 			goto out;
 		}
+		point++;
 	}
 	if (msg->entries == dm_hit_limit)
 		goto out;
@@ -243,8 +246,8 @@ static void trace_drop_common(struct sk_buff *skb, void *location)
 	 */
 	__nla_reserve_nohdr(dskb, sizeof(struct net_dm_drop_point));
 	nla->nla_len += NLA_ALIGN(sizeof(struct net_dm_drop_point));
-	memcpy(msg->points[msg->entries].pc, &location, sizeof(void *));
-	msg->points[msg->entries].count = 1;
+	memcpy(point->pc, &location, sizeof(void *));
+	point->count = 1;
 	msg->entries++;
 
 	if (!timer_pending(&data->send_timer)) {
-- 
2.20.1

[PATCH 5.4 012/147] virtio-blk: handle block_device_operations callbacks after hot unplug

[Greg Kroah-Hartman]

From: Stefan Hajnoczi <stefanha@redhat.com>

[ Upstream commit 90b5feb8c4bebc76c27fcaf3e1a0e5ca2d319e9e ]

A userspace process holding a file descriptor to a virtio_blk device can
still invoke block_device_operations after hot unplug.  This leads to a
use-after-free accessing vblk->vdev in virtblk_getgeo() when
ioctl(HDIO_GETGEO) is invoked:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000090
  IP: [<ffffffffc00e5450>] virtio_check_driver_offered_feature+0x10/0x90 [virtio]
  PGD 800000003a92f067 PUD 3a930067 PMD 0
  Oops: 0000 [#1] SMP
  CPU: 0 PID: 1310 Comm: hdio-getgeo Tainted: G           OE  ------------   3.10.0-1062.el7.x86_64 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  task: ffff9be5fbfb8000 ti: ffff9be5fa890000 task.ti: ffff9be5fa890000
  RIP: 0010:[<ffffffffc00e5450>]  [<ffffffffc00e5450>] virtio_check_driver_offered_feature+0x10/0x90 [virtio]
  RSP: 0018:ffff9be5fa893dc8  EFLAGS: 00010246
  RAX: ffff9be5fc3f3400 RBX: ffff9be5fa893e30 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff9be5fbc10b40
  RBP: ffff9be5fa893dc8 R08: 0000000000000301 R09: 0000000000000301
  R10: 0000000000000000 R11: 0000000000000000 R12: ffff9be5fdc24680
  R13: ffff9be5fbc10b40 R14: ffff9be5fbc10480 R15: 0000000000000000
  FS:  00007f1bfb968740(0000) GS:ffff9be5ffc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000090 CR3: 000000003a894000 CR4: 0000000000360ff0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   [<ffffffffc016ac37>] virtblk_getgeo+0x47/0x110 [virtio_blk]
   [<ffffffff8d3f200d>] ? handle_mm_fault+0x39d/0x9b0
   [<ffffffff8d561265>] blkdev_ioctl+0x1f5/0xa20
   [<ffffffff8d488771>] block_ioctl+0x41/0x50
   [<ffffffff8d45d9e0>] do_vfs_ioctl+0x3a0/0x5a0
   [<ffffffff8d45dc81>] SyS_ioctl+0xa1/0xc0

A related problem is that virtblk_remove() leaks the vd_index_ida index
when something still holds a reference to vblk->disk during hot unplug.
This causes virtio-blk device names to be lost (vda, vdb, etc).

Fix these issues by protecting vblk->vdev with a mutex and reference
counting vblk so the vd_index_ida index can be removed in all cases.

Fixes: 48e4043d4529 ("virtio: add virtio disk geometry feature")
Reported-by: Lance Digby <ldigby@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20200430140442.171016-1-stefanha@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/virtio_blk.c | 86 ++++++++++++++++++++++++++++++++++----
 1 file changed, 78 insertions(+), 8 deletions(-)

diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index a55383b139df9..0cf2fe2902307 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -33,6 +33,15 @@ struct virtio_blk_vq {
 } ____cacheline_aligned_in_smp;
 
 struct virtio_blk {
+	/*
+	 * This mutex must be held by anything that may run after
+	 * virtblk_remove() sets vblk->vdev to NULL.
+	 *
+	 * blk-mq, virtqueue processing, and sysfs attribute code paths are
+	 * shut down before vblk->vdev is set to NULL and therefore do not need
+	 * to hold this mutex.
+	 */
+	struct mutex vdev_mutex;
 	struct virtio_device *vdev;
 
 	/* The disk structure for the kernel. */
@@ -44,6 +53,13 @@ struct virtio_blk {
 	/* Process context for config space updates */
 	struct work_struct config_work;
 
+	/*
+	 * Tracks references from block_device_operations open/release and
+	 * virtio_driver probe/remove so this object can be freed once no
+	 * longer in use.
+	 */
+	refcount_t refs;
+
 	/* What host tells us, plus 2 for header & tailer. */
 	unsigned int sg_elems;
 
@@ -388,10 +404,55 @@ static int virtblk_get_id(struct gendisk *disk, char *id_str)
 	return err;
 }
 
+static void virtblk_get(struct virtio_blk *vblk)
+{
+	refcount_inc(&vblk->refs);
+}
+
+static void virtblk_put(struct virtio_blk *vblk)
+{
+	if (refcount_dec_and_test(&vblk->refs)) {
+		ida_simple_remove(&vd_index_ida, vblk->index);
+		mutex_destroy(&vblk->vdev_mutex);
+		kfree(vblk);
+	}
+}
+
+static int virtblk_open(struct block_device *bd, fmode_t mode)
+{
+	struct virtio_blk *vblk = bd->bd_disk->private_data;
+	int ret = 0;
+
+	mutex_lock(&vblk->vdev_mutex);
+
+	if (vblk->vdev)
+		virtblk_get(vblk);
+	else
+		ret = -ENXIO;
+
+	mutex_unlock(&vblk->vdev_mutex);
+	return ret;
+}
+
+static void virtblk_release(struct gendisk *disk, fmode_t mode)
+{
+	struct virtio_blk *vblk = disk->private_data;
+
+	virtblk_put(vblk);
+}
+
 /* We provide getgeo only to please some old bootloader/partitioning tools */
 static int virtblk_getgeo(struct block_device *bd, struct hd_geometry *geo)
 {
 	struct virtio_blk *vblk = bd->bd_disk->private_data;
+	int ret = 0;
+
+	mutex_lock(&vblk->vdev_mutex);
+
+	if (!vblk->vdev) {
+		ret = -ENXIO;
+		goto out;
+	}
 
 	/* see if the host passed in geometry config */
 	if (virtio_has_feature(vblk->vdev, VIRTIO_BLK_F_GEOMETRY)) {
@@ -407,12 +468,16 @@ static int virtblk_getgeo(struct block_device *bd, struct hd_geometry *geo)
 		geo->sectors = 1 << 5;
 		geo->cylinders = get_capacity(bd->bd_disk) >> 11;
 	}
-	return 0;
+out:
+	mutex_unlock(&vblk->vdev_mutex);
+	return ret;
 }
 
 static const struct block_device_operations virtblk_fops = {
 	.ioctl  = virtblk_ioctl,
 	.owner  = THIS_MODULE,
+	.open = virtblk_open,
+	.release = virtblk_release,
 	.getgeo = virtblk_getgeo,
 };
 
@@ -767,6 +832,10 @@ static int virtblk_probe(struct virtio_device *vdev)
 		goto out_free_index;
 	}
 
+	/* This reference is dropped in virtblk_remove(). */
+	refcount_set(&vblk->refs, 1);
+	mutex_init(&vblk->vdev_mutex);
+
 	vblk->vdev = vdev;
 	vblk->sg_elems = sg_elems;
 
@@ -932,8 +1001,6 @@ static int virtblk_probe(struct virtio_device *vdev)
 static void virtblk_remove(struct virtio_device *vdev)
 {
 	struct virtio_blk *vblk = vdev->priv;
-	int index = vblk->index;
-	int refc;
 
 	/* Make sure no work handler is accessing the device. */
 	flush_work(&vblk->config_work);
@@ -943,18 +1010,21 @@ static void virtblk_remove(struct virtio_device *vdev)
 
 	blk_mq_free_tag_set(&vblk->tag_set);
 
+	mutex_lock(&vblk->vdev_mutex);
+
 	/* Stop all the virtqueues. */
 	vdev->config->reset(vdev);
 
-	refc = kref_read(&disk_to_dev(vblk->disk)->kobj.kref);
+	/* Virtqueues are stopped, nothing can use vblk->vdev anymore. */
+	vblk->vdev = NULL;
+
 	put_disk(vblk->disk);
 	vdev->config->del_vqs(vdev);
 	kfree(vblk->vqs);
-	kfree(vblk);
 
-	/* Only free device id if we don't have any users */
-	if (refc == 1)
-		ida_simple_remove(&vd_index_ida, index);
+	mutex_unlock(&vblk->vdev_mutex);
+
+	virtblk_put(vblk);
 }
 
 #ifdef CONFIG_PM_SLEEP
-- 
2.20.1

[PATCH 5.4 013/147] sun6i: dsi: fix gcc-4.8

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 3a3a71f97c30983f1627c2c550d43566e9b634d2 ]

Older compilers warn about initializers with incorrect curly
braces:

drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c: In function 'sun6i_dsi_encoder_enable':
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:720:8: error: missing braces around initializer [-Werror=missing-braces]
  union phy_configure_opts opts = { 0 };
        ^
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:720:8: error: (near initialization for 'opts.mipi_dphy') [-Werror=missing-braces]

Use the GNU empty initializer extension to avoid this.

Fixes: bb3b6fcb6849 ("sun6i: dsi: Convert to generic phy handling")
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428215105.3928459-1-arnd@arndb.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index f83522717488a..4f944ace665d5 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -718,7 +718,7 @@ static void sun6i_dsi_encoder_enable(struct drm_encoder *encoder)
 	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
 	struct sun6i_dsi *dsi = encoder_to_sun6i_dsi(encoder);
 	struct mipi_dsi_device *device = dsi->device;
-	union phy_configure_opts opts = { 0 };
+	union phy_configure_opts opts = { };
 	struct phy_configure_opts_mipi_dphy *cfg = &opts.mipi_dphy;
 	u16 delay;
 
-- 
2.20.1

[PATCH 5.4 014/147] net_sched: fix tcm_parent in tc filter dump

[Greg Kroah-Hartman]

From: Cong Wang <xiyou.wangcong@gmail.com>

[ Upstream commit a7df4870d79b00742da6cc93ca2f336a71db77f7 ]

When we tell kernel to dump filters from root (ffff:ffff),
those filters on ingress (ffff:0000) are matched, but their
true parents must be dumped as they are. However, kernel
dumps just whatever we tell it, that is either ffff:ffff
or ffff:0000:

 $ nl-cls-list --dev=dummy0 --parent=root
 cls basic dev dummy0 id none parent root prio 49152 protocol ip match-all
 cls basic dev dummy0 id :1 parent root prio 49152 protocol ip match-all
 $ nl-cls-list --dev=dummy0 --parent=ffff:
 cls basic dev dummy0 id none parent ffff: prio 49152 protocol ip match-all
 cls basic dev dummy0 id :1 parent ffff: prio 49152 protocol ip match-all

This is confusing and misleading, more importantly this is
a regression since 4.15, so the old behavior must be restored.

And, when tc filters are installed on a tc class, the parent
should be the classid, rather than the qdisc handle. Commit
edf6711c9840 ("net: sched: remove classid and q fields from tcf_proto")
removed the classid we save for filters, we can just restore
this classid in tcf_block.

Steps to reproduce this:
 ip li set dev dummy0 up
 tc qd add dev dummy0 ingress
 tc filter add dev dummy0 parent ffff: protocol arp basic action pass
 tc filter show dev dummy0 root

Before this patch:
 filter protocol arp pref 49152 basic
 filter protocol arp pref 49152 basic handle 0x1
	action order 1: gact action pass
	 random type none pass val 0
	 index 1 ref 1 bind 1

After this patch:
 filter parent ffff: protocol arp pref 49152 basic
 filter parent ffff: protocol arp pref 49152 basic handle 0x1
 	action order 1: gact action pass
 	 random type none pass val 0
	 index 1 ref 1 bind 1

Fixes: a10fa20101ae ("net: sched: propagate q and parent from caller down to tcf_fill_node")
Fixes: edf6711c9840 ("net: sched: remove classid and q fields from tcf_proto")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/sch_generic.h | 1 +
 net/sched/cls_api.c       | 8 ++++----
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index 9fb7cf1cdf36c..3d03756e10699 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -407,6 +407,7 @@ struct tcf_block {
 	struct mutex lock;
 	struct list_head chain_list;
 	u32 index; /* block index for shared blocks */
+	u32 classid; /* which class this block belongs to */
 	refcount_t refcnt;
 	struct net *net;
 	struct Qdisc *q;
diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index c2cdd0fc2e709..68c8fc6f535c7 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -2005,6 +2005,7 @@ static int tc_new_tfilter(struct sk_buff *skb, struct nlmsghdr *n,
 		err = PTR_ERR(block);
 		goto errout;
 	}
+	block->classid = parent;
 
 	chain_index = tca[TCA_CHAIN] ? nla_get_u32(tca[TCA_CHAIN]) : 0;
 	if (chain_index > TC_ACT_EXT_VAL_MASK) {
@@ -2547,12 +2548,10 @@ static int tc_dump_tfilter(struct sk_buff *skb, struct netlink_callback *cb)
 			return skb->len;
 
 		parent = tcm->tcm_parent;
-		if (!parent) {
+		if (!parent)
 			q = dev->qdisc;
-			parent = q->handle;
-		} else {
+		else
 			q = qdisc_lookup(dev, TC_H_MAJ(tcm->tcm_parent));
-		}
 		if (!q)
 			goto out;
 		cops = q->ops->cl_ops;
@@ -2568,6 +2567,7 @@ static int tc_dump_tfilter(struct sk_buff *skb, struct netlink_callback *cb)
 		block = cops->tcf_block(q, cl, NULL);
 		if (!block)
 			goto out;
+		parent = block->classid;
 		if (tcf_block_shared(block))
 			q = NULL;
 	}
-- 
2.20.1

[PATCH 5.4 015/147] scsi: sg: add sg_remove_request in sg_write

[Greg Kroah-Hartman]

From: Wu Bo <wubo40@huawei.com>

commit 83c6f2390040f188cc25b270b4befeb5628c1aee upstream.

If the __copy_from_user function failed we need to call sg_remove_request
in sg_write.

Link: https://lore.kernel.org/r/610618d9-e983-fd56-ed0f-639428343af7@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[groeck: Backport to v5.4.y and older kernels]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/sg.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -689,8 +689,10 @@ sg_write(struct file *filp, const char _
 	hp->flags = input_size;	/* structure abuse ... */
 	hp->pack_id = old_hdr.pack_id;
 	hp->usr_ptr = NULL;
-	if (__copy_from_user(cmnd, buf, cmd_size))
+	if (__copy_from_user(cmnd, buf, cmd_size)) {
+		sg_remove_request(sfp, srp);
 		return -EFAULT;
+	}
 	/*
 	 * SG_DXFER_TO_FROM_DEV is functionally equivalent to SG_DXFER_FROM_DEV,
 	 * but is is possible that the app intended SG_DXFER_TO_DEV, because there

[PATCH 5.4 016/147] selftests/bpf: fix goto cleanup label not defined

[Greg Kroah-Hartman]

From: Hangbin Liu <liuhangbin@gmail.com>

kernel test robot found a warning when build bpf selftest for 5.4.y stable
tree:

prog_tests/stacktrace_build_id_nmi.c:55:3: error: label ‘cleanup’ used but not defined
   goto cleanup;
   ^~~~

This is because we are lacking upstream commit dde53c1b763b
("selftests/bpf: Convert few more selftest to skeletons"). But this
commit is too large and need more backports. To fix it, the
easiest way is just use the current goto label 'close_prog'.

Reported-by: kernel test robot <rong.a.chen@intel.com>
Fixes: da43712a7262 ("selftests/bpf: Skip perf hw events test if the setup disabled it")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/testing/selftests/bpf/prog_tests/stacktrace_build_id_nmi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id_nmi.c
+++ b/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id_nmi.c
@@ -52,7 +52,7 @@ retry:
 	if (pmu_fd < 0 && errno == ENOENT) {
 		printf("%s:SKIP:no PERF_COUNT_HW_CPU_CYCLES\n", __func__);
 		test__skip();
-		goto cleanup;
+		goto close_prog;
 	}
 	if (CHECK(pmu_fd < 0, "perf_event_open", "err %d errno %d\n",
 		  pmu_fd, errno))

[PATCH 5.4 017/147] mmc: sdhci-acpi: Add SDHCI_QUIRK2_BROKEN_64_BIT_DMA for AMDI0040

[Greg Kroah-Hartman]

From: Raul E Rangel <rrangel@chromium.org>

[ Upstream commit 45a3fe3bf93b7cfeddc28ef7386555e05dc57f06 ]

The AMD eMMC 5.0 controller does not support 64 bit DMA.

Fixes: 34597a3f60b1 ("mmc: sdhci-acpi: Add support for ACPI HID of AMD Controller with HS400")
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Link: https://marc.info/?l=linux-mmc&m=158879884514552&w=2
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200508165344.1.Id5bb8b1ae7ea576f26f9d91c761df7ccffbf58c5@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/sdhci-acpi.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index 1604f512c7bd1..01fc437ed9659 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -602,10 +602,12 @@ static int sdhci_acpi_emmc_amd_probe_slot(struct platform_device *pdev,
 }
 
 static const struct sdhci_acpi_slot sdhci_acpi_slot_amd_emmc = {
-	.chip   = &sdhci_acpi_chip_amd,
-	.caps   = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
-	.quirks = SDHCI_QUIRK_32BIT_DMA_ADDR | SDHCI_QUIRK_32BIT_DMA_SIZE |
-			SDHCI_QUIRK_32BIT_ADMA_SIZE,
+	.chip		= &sdhci_acpi_chip_amd,
+	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
+	.quirks		= SDHCI_QUIRK_32BIT_DMA_ADDR |
+			  SDHCI_QUIRK_32BIT_DMA_SIZE |
+			  SDHCI_QUIRK_32BIT_ADMA_SIZE,
+	.quirks2	= SDHCI_QUIRK2_BROKEN_64_BIT_DMA,
 	.probe_slot     = sdhci_acpi_emmc_amd_probe_slot,
 };
 
-- 
2.20.1

[PATCH 5.4 018/147] dpaa2-eth: properly handle buffer size restrictions

[Greg Kroah-Hartman]

From: Ioana Ciornei <ioana.ciornei@nxp.com>

[ Upstream commit efa6a7d07523ffbbf6503c1a7eeb52201c15c0e3 ]

Depending on the WRIOP version, the buffer size on the RX path must by a
multiple of 64 or 256. Handle this restriction properly by aligning down
the buffer size to the necessary value. Also, use the new buffer size
dynamically computed instead of the compile time one.

Fixes: 27c874867c4e ("dpaa2-eth: Use a single page per Rx buffer")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c |   29 +++++++++++++----------
 drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h |    1 
 2 files changed, 18 insertions(+), 12 deletions(-)

--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
@@ -86,7 +86,7 @@ static void free_rx_fd(struct dpaa2_eth_
 	for (i = 1; i < DPAA2_ETH_MAX_SG_ENTRIES; i++) {
 		addr = dpaa2_sg_get_addr(&sgt[i]);
 		sg_vaddr = dpaa2_iova_to_virt(priv->iommu_domain, addr);
-		dma_unmap_page(dev, addr, DPAA2_ETH_RX_BUF_SIZE,
+		dma_unmap_page(dev, addr, priv->rx_buf_size,
 			       DMA_BIDIRECTIONAL);
 
 		free_pages((unsigned long)sg_vaddr, 0);
@@ -144,7 +144,7 @@ static struct sk_buff *build_frag_skb(st
 		/* Get the address and length from the S/G entry */
 		sg_addr = dpaa2_sg_get_addr(sge);
 		sg_vaddr = dpaa2_iova_to_virt(priv->iommu_domain, sg_addr);
-		dma_unmap_page(dev, sg_addr, DPAA2_ETH_RX_BUF_SIZE,
+		dma_unmap_page(dev, sg_addr, priv->rx_buf_size,
 			       DMA_BIDIRECTIONAL);
 
 		sg_length = dpaa2_sg_get_len(sge);
@@ -185,7 +185,7 @@ static struct sk_buff *build_frag_skb(st
 				(page_address(page) - page_address(head_page));
 
 			skb_add_rx_frag(skb, i - 1, head_page, page_offset,
-					sg_length, DPAA2_ETH_RX_BUF_SIZE);
+					sg_length, priv->rx_buf_size);
 		}
 
 		if (dpaa2_sg_is_final(sge))
@@ -211,7 +211,7 @@ static void free_bufs(struct dpaa2_eth_p
 
 	for (i = 0; i < count; i++) {
 		vaddr = dpaa2_iova_to_virt(priv->iommu_domain, buf_array[i]);
-		dma_unmap_page(dev, buf_array[i], DPAA2_ETH_RX_BUF_SIZE,
+		dma_unmap_page(dev, buf_array[i], priv->rx_buf_size,
 			       DMA_BIDIRECTIONAL);
 		free_pages((unsigned long)vaddr, 0);
 	}
@@ -331,7 +331,7 @@ static u32 run_xdp(struct dpaa2_eth_priv
 		break;
 	case XDP_REDIRECT:
 		dma_unmap_page(priv->net_dev->dev.parent, addr,
-			       DPAA2_ETH_RX_BUF_SIZE, DMA_BIDIRECTIONAL);
+			       priv->rx_buf_size, DMA_BIDIRECTIONAL);
 		ch->buf_count--;
 		xdp.data_hard_start = vaddr;
 		err = xdp_do_redirect(priv->net_dev, &xdp, xdp_prog);
@@ -370,7 +370,7 @@ static void dpaa2_eth_rx(struct dpaa2_et
 	trace_dpaa2_rx_fd(priv->net_dev, fd);
 
 	vaddr = dpaa2_iova_to_virt(priv->iommu_domain, addr);
-	dma_sync_single_for_cpu(dev, addr, DPAA2_ETH_RX_BUF_SIZE,
+	dma_sync_single_for_cpu(dev, addr, priv->rx_buf_size,
 				DMA_BIDIRECTIONAL);
 
 	fas = dpaa2_get_fas(vaddr, false);
@@ -389,13 +389,13 @@ static void dpaa2_eth_rx(struct dpaa2_et
 			return;
 		}
 
-		dma_unmap_page(dev, addr, DPAA2_ETH_RX_BUF_SIZE,
+		dma_unmap_page(dev, addr, priv->rx_buf_size,
 			       DMA_BIDIRECTIONAL);
 		skb = build_linear_skb(ch, fd, vaddr);
 	} else if (fd_format == dpaa2_fd_sg) {
 		WARN_ON(priv->xdp_prog);
 
-		dma_unmap_page(dev, addr, DPAA2_ETH_RX_BUF_SIZE,
+		dma_unmap_page(dev, addr, priv->rx_buf_size,
 			       DMA_BIDIRECTIONAL);
 		skb = build_frag_skb(priv, ch, buf_data);
 		free_pages((unsigned long)vaddr, 0);
@@ -963,7 +963,7 @@ static int add_bufs(struct dpaa2_eth_pri
 		if (!page)
 			goto err_alloc;
 
-		addr = dma_map_page(dev, page, 0, DPAA2_ETH_RX_BUF_SIZE,
+		addr = dma_map_page(dev, page, 0, priv->rx_buf_size,
 				    DMA_BIDIRECTIONAL);
 		if (unlikely(dma_mapping_error(dev, addr)))
 			goto err_map;
@@ -973,7 +973,7 @@ static int add_bufs(struct dpaa2_eth_pri
 		/* tracing point */
 		trace_dpaa2_eth_buf_seed(priv->net_dev,
 					 page, DPAA2_ETH_RX_BUF_RAW_SIZE,
-					 addr, DPAA2_ETH_RX_BUF_SIZE,
+					 addr, priv->rx_buf_size,
 					 bpid);
 	}
 
@@ -1680,7 +1680,7 @@ static bool xdp_mtu_valid(struct dpaa2_e
 	int mfl, linear_mfl;
 
 	mfl = DPAA2_ETH_L2_MAX_FRM(mtu);
-	linear_mfl = DPAA2_ETH_RX_BUF_SIZE - DPAA2_ETH_RX_HWA_SIZE -
+	linear_mfl = priv->rx_buf_size - DPAA2_ETH_RX_HWA_SIZE -
 		     dpaa2_eth_rx_head_room(priv) - XDP_PACKET_HEADROOM;
 
 	if (mfl > linear_mfl) {
@@ -2432,6 +2432,11 @@ static int set_buffer_layout(struct dpaa
 	else
 		rx_buf_align = DPAA2_ETH_RX_BUF_ALIGN;
 
+	/* We need to ensure that the buffer size seen by WRIOP is a multiple
+	 * of 64 or 256 bytes depending on the WRIOP version.
+	 */
+	priv->rx_buf_size = ALIGN_DOWN(DPAA2_ETH_RX_BUF_SIZE, rx_buf_align);
+
 	/* tx buffer */
 	buf_layout.private_data_size = DPAA2_ETH_SWA_SIZE;
 	buf_layout.pass_timestamp = true;
@@ -3096,7 +3101,7 @@ static int bind_dpni(struct dpaa2_eth_pr
 	pools_params.num_dpbp = 1;
 	pools_params.pools[0].dpbp_id = priv->dpbp_dev->obj_desc.id;
 	pools_params.pools[0].backup_pool = 0;
-	pools_params.pools[0].buffer_size = DPAA2_ETH_RX_BUF_SIZE;
+	pools_params.pools[0].buffer_size = priv->rx_buf_size;
 	err = dpni_set_pools(priv->mc_io, 0, priv->mc_token, &pools_params);
 	if (err) {
 		dev_err(dev, "dpni_set_pools() failed\n");
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
@@ -373,6 +373,7 @@ struct dpaa2_eth_priv {
 	u16 tx_data_offset;
 
 	struct fsl_mc_device *dpbp_dev;
+	u16 rx_buf_size;
 	u16 bpid;
 	struct iommu_domain *iommu_domain;
 

[PATCH 5.4 019/147] net: fix a potential recursive NETDEV_FEAT_CHANGE

[Greg Kroah-Hartman]

From: Cong Wang <xiyou.wangcong@gmail.com>

[ Upstream commit dd912306ff008891c82cd9f63e8181e47a9cb2fb ]

syzbot managed to trigger a recursive NETDEV_FEAT_CHANGE event
between bonding master and slave. I managed to find a reproducer
for this:

  ip li set bond0 up
  ifenslave bond0 eth0
  brctl addbr br0
  ethtool -K eth0 lro off
  brctl addif br0 bond0
  ip li set br0 up

When a NETDEV_FEAT_CHANGE event is triggered on a bonding slave,
it captures this and calls bond_compute_features() to fixup its
master's and other slaves' features. However, when syncing with
its lower devices by netdev_sync_lower_features() this event is
triggered again on slaves when the LRO feature fails to change,
so it goes back and forth recursively until the kernel stack is
exhausted.

Commit 17b85d29e82c intentionally lets __netdev_update_features()
return -1 for such a failure case, so we have to just rely on
the existing check inside netdev_sync_lower_features() and skip
NETDEV_FEAT_CHANGE event only for this specific failure case.

Fixes: fd867d51f889 ("net/core: generic support for disabling netdev features down stack")
Reported-by: syzbot+e73ceacfd8560cc8a3ca@syzkaller.appspotmail.com
Reported-by: syzbot+c2fb6f9ddcea95ba49b5@syzkaller.appspotmail.com
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jann Horn <jannh@google.com>
Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/dev.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -8595,11 +8595,13 @@ static void netdev_sync_lower_features(s
 			netdev_dbg(upper, "Disabling feature %pNF on lower dev %s.\n",
 				   &feature, lower->name);
 			lower->wanted_features &= ~feature;
-			netdev_update_features(lower);
+			__netdev_update_features(lower);
 
 			if (unlikely(lower->features & feature))
 				netdev_WARN(upper, "failed to disable %pNF on %s!\n",
 					    &feature, lower->name);
+			else
+				netdev_features_change(lower);
 		}
 	}
 }

[PATCH 5.4 020/147] netlabel: cope with NULL catmap

[Greg Kroah-Hartman]

From: Paolo Abeni <pabeni@redhat.com>

[ Upstream commit eead1c2ea2509fd754c6da893a94f0e69e83ebe4 ]

The cipso and calipso code can set the MLS_CAT attribute on
successful parsing, even if the corresponding catmap has
not been allocated, as per current configuration and external
input.

Later, selinux code tries to access the catmap if the MLS_CAT flag
is present via netlbl_catmap_getlong(). That may cause null ptr
dereference while processing incoming network traffic.

Address the issue setting the MLS_CAT flag only if the catmap is
really allocated. Additionally let netlbl_catmap_getlong() cope
with NULL catmap.

Reported-by: Matthew Sheets <matthew.sheets@gd-ms.com>
Fixes: 4b8feff251da ("netlabel: fix the horribly broken catmap functions")
Fixes: ceba1832b1b2 ("calipso: Set the calipso socket label to match the secattr.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/cipso_ipv4.c        |    6 ++++--
 net/ipv6/calipso.c           |    3 ++-
 net/netlabel/netlabel_kapi.c |    6 ++++++
 3 files changed, 12 insertions(+), 3 deletions(-)

--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -1258,7 +1258,8 @@ static int cipso_v4_parsetag_rbm(const s
 			return ret_val;
 		}
 
-		secattr->flags |= NETLBL_SECATTR_MLS_CAT;
+		if (secattr->attr.mls.cat)
+			secattr->flags |= NETLBL_SECATTR_MLS_CAT;
 	}
 
 	return 0;
@@ -1439,7 +1440,8 @@ static int cipso_v4_parsetag_rng(const s
 			return ret_val;
 		}
 
-		secattr->flags |= NETLBL_SECATTR_MLS_CAT;
+		if (secattr->attr.mls.cat)
+			secattr->flags |= NETLBL_SECATTR_MLS_CAT;
 	}
 
 	return 0;
--- a/net/ipv6/calipso.c
+++ b/net/ipv6/calipso.c
@@ -1047,7 +1047,8 @@ static int calipso_opt_getattr(const uns
 			goto getattr_return;
 		}
 
-		secattr->flags |= NETLBL_SECATTR_MLS_CAT;
+		if (secattr->attr.mls.cat)
+			secattr->flags |= NETLBL_SECATTR_MLS_CAT;
 	}
 
 	secattr->type = NETLBL_NLTYPE_CALIPSO;
--- a/net/netlabel/netlabel_kapi.c
+++ b/net/netlabel/netlabel_kapi.c
@@ -734,6 +734,12 @@ int netlbl_catmap_getlong(struct netlbl_
 	if ((off & (BITS_PER_LONG - 1)) != 0)
 		return -EINVAL;
 
+	/* a null catmap is equivalent to an empty one */
+	if (!catmap) {
+		*offset = (u32)-1;
+		return 0;
+	}
+
 	if (off < catmap->startbit) {
 		off = catmap->startbit;
 		*offset = off;

[PATCH 5.4 021/147] net: phy: fix aneg restart in phy_ethtool_set_eee

[Greg Kroah-Hartman]

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit 9de5d235b60a7cdfcdd5461e70c5663e713fde87 ]

phy_restart_aneg() enables aneg in the PHY. That's not what we want
if phydev->autoneg is disabled. In this case still update EEE
advertisement register, but don't enable aneg and don't trigger an
aneg restart.

Fixes: f75abeb8338e ("net: phy: restart phy autonegotiation after EEE advertisment change")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/phy.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1160,9 +1160,11 @@ int phy_ethtool_set_eee(struct phy_devic
 		/* Restart autonegotiation so the new modes get sent to the
 		 * link partner.
 		 */
-		ret = phy_restart_aneg(phydev);
-		if (ret < 0)
-			return ret;
+		if (phydev->autoneg == AUTONEG_ENABLE) {
+			ret = phy_restart_aneg(phydev);
+			if (ret < 0)
+				return ret;
+		}
 	}
 
 	return 0;

[PATCH 5.4 022/147] net: stmmac: fix num_por initialization

[Greg Kroah-Hartman]

From: Vinod Koul <vkoul@kernel.org>

[ Upstream commit fd4a5177382230d39e0d95632d98103fb2938383 ]

Driver missed initializing num_por which is one of the por values that
driver configures to hardware. In order to get these values, add a new
structure ethqos_emac_driver_data which holds por and num_por values
and populate that in driver probe.

Fixes: a7c30e62d4b8 ("net: stmmac: Add driver for Qualcomm ethqos")
Reported-by: Rahul Ankushrao Kawadgave <rahulak@qti.qualcomm.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c |   17 ++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -75,6 +75,11 @@ struct ethqos_emac_por {
 	unsigned int value;
 };
 
+struct ethqos_emac_driver_data {
+	const struct ethqos_emac_por *por;
+	unsigned int num_por;
+};
+
 struct qcom_ethqos {
 	struct platform_device *pdev;
 	void __iomem *rgmii_base;
@@ -171,6 +176,11 @@ static const struct ethqos_emac_por emac
 	{ .offset = RGMII_IO_MACRO_CONFIG2,	.value = 0x00002060 },
 };
 
+static const struct ethqos_emac_driver_data emac_v2_3_0_data = {
+	.por = emac_v2_3_0_por,
+	.num_por = ARRAY_SIZE(emac_v2_3_0_por),
+};
+
 static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
 {
 	unsigned int val;
@@ -442,6 +452,7 @@ static int qcom_ethqos_probe(struct plat
 	struct device_node *np = pdev->dev.of_node;
 	struct plat_stmmacenet_data *plat_dat;
 	struct stmmac_resources stmmac_res;
+	const struct ethqos_emac_driver_data *data;
 	struct qcom_ethqos *ethqos;
 	struct resource *res;
 	int ret;
@@ -471,7 +482,9 @@ static int qcom_ethqos_probe(struct plat
 		goto err_mem;
 	}
 
-	ethqos->por = of_device_get_match_data(&pdev->dev);
+	data = of_device_get_match_data(&pdev->dev);
+	ethqos->por = data->por;
+	ethqos->num_por = data->num_por;
 
 	ethqos->rgmii_clk = devm_clk_get(&pdev->dev, "rgmii");
 	if (IS_ERR(ethqos->rgmii_clk)) {
@@ -526,7 +539,7 @@ static int qcom_ethqos_remove(struct pla
 }
 
 static const struct of_device_id qcom_ethqos_match[] = {
-	{ .compatible = "qcom,qcs404-ethqos", .data = &emac_v2_3_0_por},
+	{ .compatible = "qcom,qcs404-ethqos", .data = &emac_v2_3_0_data},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, qcom_ethqos_match);

[PATCH 5.4 023/147] pppoe: only process PADT targeted at local interfaces

[Greg Kroah-Hartman]

From: Guillaume Nault <gnault@redhat.com>

[ Upstream commit b8c158395119be62294da73646a3953c29ac974b ]

We don't want to disconnect a session because of a stray PADT arriving
while the interface is in promiscuous mode.
Furthermore, multicast and broadcast packets make no sense here, so
only PACKET_HOST is accepted.

Reported-by: David Balažic <xerces9@gmail.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ppp/pppoe.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/net/ppp/pppoe.c
+++ b/drivers/net/ppp/pppoe.c
@@ -492,6 +492,9 @@ static int pppoe_disc_rcv(struct sk_buff
 	if (!skb)
 		goto out;
 
+	if (skb->pkt_type != PACKET_HOST)
+		goto abort;
+
 	if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr)))
 		goto abort;
 

[PATCH 5.4 024/147] Revert "ipv6: add mtu lock check in __ip6_rt_update_pmtu"

[Greg Kroah-Hartman]

From: "Maciej Żenczykowski" <maze@google.com>

[ Upstream commit 09454fd0a4ce23cb3d8af65066c91a1bf27120dd ]

This reverts commit 19bda36c4299ce3d7e5bce10bebe01764a655a6d:

| ipv6: add mtu lock check in __ip6_rt_update_pmtu
|
| Prior to this patch, ipv6 didn't do mtu lock check in ip6_update_pmtu.
| It leaded to that mtu lock doesn't really work when receiving the pkt
| of ICMPV6_PKT_TOOBIG.
|
| This patch is to add mtu lock check in __ip6_rt_update_pmtu just as ipv4
| did in __ip_rt_update_pmtu.

The above reasoning is incorrect.  IPv6 *requires* icmp based pmtu to work.
There's already a comment to this effect elsewhere in the kernel:

  $ git grep -p -B1 -A3 'RTAX_MTU lock'
  net/ipv6/route.c=4813=

  static int rt6_mtu_change_route(struct fib6_info *f6i, void *p_arg)
  ...
    /* In IPv6 pmtu discovery is not optional,
       so that RTAX_MTU lock cannot disable it.
       We still use this lock to block changes
       caused by addrconf/ndisc.
    */

This reverts to the pre-4.9 behaviour.

Cc: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Fixes: 19bda36c4299 ("ipv6: add mtu lock check in __ip6_rt_update_pmtu")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/route.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -2728,8 +2728,10 @@ static void __ip6_rt_update_pmtu(struct
 	const struct in6_addr *daddr, *saddr;
 	struct rt6_info *rt6 = (struct rt6_info *)dst;
 
-	if (dst_metric_locked(dst, RTAX_MTU))
-		return;
+	/* Note: do *NOT* check dst_metric_locked(dst, RTAX_MTU)
+	 * IPv6 pmtu discovery isn't optional, so 'mtu lock' cannot disable it.
+	 * [see also comment in rt6_mtu_change_route()]
+	 */
 
 	if (iph) {
 		daddr = &iph->daddr;

[PATCH 5.4 025/147] tcp: fix error recovery in tcp_zerocopy_receive()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit e776af608f692a7a647455106295fa34469e7475 ]

If user provides wrong virtual address in TCP_ZEROCOPY_RECEIVE
operation we want to return -EINVAL error.

But depending on zc->recv_skip_hint content, we might return
-EIO error if the socket has SOCK_DONE set.

Make sure to return -EINVAL in this case.

BUG: KMSAN: uninit-value in tcp_zerocopy_receive net/ipv4/tcp.c:1833 [inline]
BUG: KMSAN: uninit-value in do_tcp_getsockopt+0x4494/0x6320 net/ipv4/tcp.c:3685
CPU: 1 PID: 625 Comm: syz-executor.0 Not tainted 5.7.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x220 lib/dump_stack.c:118
 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121
 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
 tcp_zerocopy_receive net/ipv4/tcp.c:1833 [inline]
 do_tcp_getsockopt+0x4494/0x6320 net/ipv4/tcp.c:3685
 tcp_getsockopt+0xf8/0x1f0 net/ipv4/tcp.c:3728
 sock_common_getsockopt+0x13f/0x180 net/core/sock.c:3131
 __sys_getsockopt+0x533/0x7b0 net/socket.c:2177
 __do_sys_getsockopt net/socket.c:2192 [inline]
 __se_sys_getsockopt+0xe1/0x100 net/socket.c:2189
 __x64_sys_getsockopt+0x62/0x80 net/socket.c:2189
 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:297
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45c829
Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f1deeb72c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000037
RAX: ffffffffffffffda RBX: 00000000004e01e0 RCX: 000000000045c829
RDX: 0000000000000023 RSI: 0000000000000006 RDI: 0000000000000009
RBP: 000000000078bf00 R08: 0000000020000200 R09: 0000000000000000
R10: 00000000200001c0 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000001d8 R14: 00000000004d3038 R15: 00007f1deeb736d4

Local variable ----zc@do_tcp_getsockopt created at:
 do_tcp_getsockopt+0x1a74/0x6320 net/ipv4/tcp.c:3670
 do_tcp_getsockopt+0x1a74/0x6320 net/ipv4/tcp.c:3670

Fixes: 05255b823a61 ("tcp: add TCP_ZEROCOPY_RECEIVE support for zerocopy receive")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1757,10 +1757,11 @@ static int tcp_zerocopy_receive(struct s
 
 	down_read(&current->mm->mmap_sem);
 
-	ret = -EINVAL;
 	vma = find_vma(current->mm, address);
-	if (!vma || vma->vm_start > address || vma->vm_ops != &tcp_vm_ops)
-		goto out;
+	if (!vma || vma->vm_start > address || vma->vm_ops != &tcp_vm_ops) {
+		up_read(&current->mm->mmap_sem);
+		return -EINVAL;
+	}
 	zc->length = min_t(unsigned long, zc->length, vma->vm_end - address);
 
 	tp = tcp_sk(sk);

[PATCH 5.4 026/147] tcp: fix SO_RCVLOWAT hangs with fat skbs

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 24adbc1676af4e134e709ddc7f34cf2adc2131e4 ]

We autotune rcvbuf whenever SO_RCVLOWAT is set to account for 100%
overhead in tcp_set_rcvlowat()

This works well when skb->len/skb->truesize ratio is bigger than 0.5

But if we receive packets with small MSS, we can end up in a situation
where not enough bytes are available in the receive queue to satisfy
RCVLOWAT setting.
As our sk_rcvbuf limit is hit, we send zero windows in ACK packets,
preventing remote peer from sending more data.

Even autotuning does not help, because it only triggers at the time
user process drains the queue. If no EPOLLIN is generated, this
can not happen.

Note poll() has a similar issue, after commit
c7004482e8dc ("tcp: Respect SO_RCVLOWAT in tcp_poll().")

Fixes: 03f45c883c6f ("tcp: avoid extra wakeups for SO_RCVLOWAT users")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/tcp.h    |   13 +++++++++++++
 net/ipv4/tcp.c       |   14 +++++++++++---
 net/ipv4/tcp_input.c |    3 ++-
 3 files changed, 26 insertions(+), 4 deletions(-)

--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -1401,6 +1401,19 @@ static inline int tcp_full_space(const s
 	return tcp_win_from_space(sk, READ_ONCE(sk->sk_rcvbuf));
 }
 
+/* We provision sk_rcvbuf around 200% of sk_rcvlowat.
+ * If 87.5 % (7/8) of the space has been consumed, we want to override
+ * SO_RCVLOWAT constraint, since we are receiving skbs with too small
+ * len/truesize ratio.
+ */
+static inline bool tcp_rmem_pressure(const struct sock *sk)
+{
+	int rcvbuf = READ_ONCE(sk->sk_rcvbuf);
+	int threshold = rcvbuf - (rcvbuf >> 3);
+
+	return atomic_read(&sk->sk_rmem_alloc) > threshold;
+}
+
 extern void tcp_openreq_init_rwin(struct request_sock *req,
 				  const struct sock *sk_listener,
 				  const struct dst_entry *dst);
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -477,9 +477,17 @@ static void tcp_tx_timestamp(struct sock
 static inline bool tcp_stream_is_readable(const struct tcp_sock *tp,
 					  int target, struct sock *sk)
 {
-	return (READ_ONCE(tp->rcv_nxt) - READ_ONCE(tp->copied_seq) >= target) ||
-		(sk->sk_prot->stream_memory_read ?
-		sk->sk_prot->stream_memory_read(sk) : false);
+	int avail = READ_ONCE(tp->rcv_nxt) - READ_ONCE(tp->copied_seq);
+
+	if (avail > 0) {
+		if (avail >= target)
+			return true;
+		if (tcp_rmem_pressure(sk))
+			return true;
+	}
+	if (sk->sk_prot->stream_memory_read)
+		return sk->sk_prot->stream_memory_read(sk);
+	return false;
 }
 
 /*
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -4751,7 +4751,8 @@ void tcp_data_ready(struct sock *sk)
 	const struct tcp_sock *tp = tcp_sk(sk);
 	int avail = tp->rcv_nxt - tp->copied_seq;
 
-	if (avail < sk->sk_rcvlowat && !sock_flag(sk, SOCK_DONE))
+	if (avail < sk->sk_rcvlowat && !tcp_rmem_pressure(sk) &&
+	    !sock_flag(sk, SOCK_DONE))
 		return;
 
 	sk->sk_data_ready(sk);

[PATCH 5.4 027/147] virtio_net: fix lockdep warning on 32 bit

[Greg Kroah-Hartman]

From: "Michael S. Tsirkin" <mst@redhat.com>

[ Upstream commit 01c3259818a11f3cc3cd767adbae6b45849c03c1 ]

When we fill up a receive VQ, try_fill_recv currently tries to count
kicks using a 64 bit stats counter. Turns out, on a 32 bit kernel that
uses a seqcount. sequence counts are "lock" constructs where you need to
make sure that writers are serialized.

In turn, this means that we mustn't run two try_fill_recv concurrently.
Which of course we don't. We do run try_fill_recv sometimes from a
softirq napi context, and sometimes from a fully preemptible context,
but the later always runs with napi disabled.

However, when it comes to the seqcount, lockdep is trying to enforce the
rule that the same lock isn't accessed from preemptible and softirq
context - it doesn't know about napi being enabled/disabled. This causes
a false-positive warning:

WARNING: inconsistent lock state
...
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.

As a work around, shut down the warning by switching
to u64_stats_update_begin_irqsave - that works by disabling
interrupts on 32 bit only, is a NOP on 64 bit.

Reported-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/virtio_net.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -1231,9 +1231,11 @@ static bool try_fill_recv(struct virtnet
 			break;
 	} while (rq->vq->num_free);
 	if (virtqueue_kick_prepare(rq->vq) && virtqueue_notify(rq->vq)) {
-		u64_stats_update_begin(&rq->stats.syncp);
+		unsigned long flags;
+
+		flags = u64_stats_update_begin_irqsave(&rq->stats.syncp);
 		rq->stats.kicks++;
-		u64_stats_update_end(&rq->stats.syncp);
+		u64_stats_update_end_irqrestore(&rq->stats.syncp, flags);
 	}
 
 	return !oom;

[PATCH 5.4 028/147] dpaa2-eth: prevent array underflow in update_cls_rule()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 6d32a5119811d2e9b5caa284181944c6f1f192ed ]

The "location" is controlled by the user via the ethtool_set_rxnfc()
function.  This update_cls_rule() function checks for array overflows
but it doesn't check if the value is negative.  I have changed the type
to unsigned to prevent array underflows.

Fixes: afb90dbb5f78 ("dpaa2-eth: Add ethtool support for flow classification")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
@@ -590,7 +590,7 @@ static int num_rules(struct dpaa2_eth_pr
 
 static int update_cls_rule(struct net_device *net_dev,
 			   struct ethtool_rx_flow_spec *new_fs,
-			   int location)
+			   unsigned int location)
 {
 	struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
 	struct dpaa2_eth_cls_rule *rule;

[PATCH 5.4 029/147] hinic: fix a bug of ndo_stop

[Greg Kroah-Hartman]

From: Luo bin <luobin9@huawei.com>

[ Upstream commit e8a1b0efd632d1c9db7d4e93da66377c7b524862 ]

if some function in ndo_stop interface returns failure because of
hardware fault, must go on excuting rest steps rather than return
failure directly, otherwise will cause memory leak.And bump the
timeout for SET_FUNC_STATE to ensure that cmd won't return failure
when hw is busy. Otherwise hw may stomp host memory if we free
memory regardless of the return value of SET_FUNC_STATE.

Fixes: 51ba902a16e6 ("net-next/hinic: Initialize hw interface")
Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c |   16 ++++++++++++----
 drivers/net/ethernet/huawei/hinic/hinic_main.c    |   18 +++---------------
 2 files changed, 15 insertions(+), 19 deletions(-)

--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c
@@ -45,6 +45,8 @@
 
 #define MGMT_MSG_TIMEOUT                5000
 
+#define SET_FUNC_PORT_MGMT_TIMEOUT	25000
+
 #define mgmt_to_pfhwdev(pf_mgmt)        \
 		container_of(pf_mgmt, struct hinic_pfhwdev, pf_to_mgmt)
 
@@ -238,12 +240,13 @@ static int msg_to_mgmt_sync(struct hinic
 			    u8 *buf_in, u16 in_size,
 			    u8 *buf_out, u16 *out_size,
 			    enum mgmt_direction_type direction,
-			    u16 resp_msg_id)
+			    u16 resp_msg_id, u32 timeout)
 {
 	struct hinic_hwif *hwif = pf_to_mgmt->hwif;
 	struct pci_dev *pdev = hwif->pdev;
 	struct hinic_recv_msg *recv_msg;
 	struct completion *recv_done;
+	unsigned long timeo;
 	u16 msg_id;
 	int err;
 
@@ -267,8 +270,9 @@ static int msg_to_mgmt_sync(struct hinic
 		goto unlock_sync_msg;
 	}
 
-	if (!wait_for_completion_timeout(recv_done,
-					 msecs_to_jiffies(MGMT_MSG_TIMEOUT))) {
+	timeo = msecs_to_jiffies(timeout ? timeout : MGMT_MSG_TIMEOUT);
+
+	if (!wait_for_completion_timeout(recv_done, timeo)) {
 		dev_err(&pdev->dev, "MGMT timeout, MSG id = %d\n", msg_id);
 		err = -ETIMEDOUT;
 		goto unlock_sync_msg;
@@ -342,6 +346,7 @@ int hinic_msg_to_mgmt(struct hinic_pf_to
 {
 	struct hinic_hwif *hwif = pf_to_mgmt->hwif;
 	struct pci_dev *pdev = hwif->pdev;
+	u32 timeout = 0;
 
 	if (sync != HINIC_MGMT_MSG_SYNC) {
 		dev_err(&pdev->dev, "Invalid MGMT msg type\n");
@@ -353,9 +358,12 @@ int hinic_msg_to_mgmt(struct hinic_pf_to
 		return -EINVAL;
 	}
 
+	if (cmd == HINIC_PORT_CMD_SET_FUNC_STATE)
+		timeout = SET_FUNC_PORT_MGMT_TIMEOUT;
+
 	return msg_to_mgmt_sync(pf_to_mgmt, mod, cmd, buf_in, in_size,
 				buf_out, out_size, MGMT_DIRECT_SEND,
-				MSG_NOT_RESP);
+				MSG_NOT_RESP, timeout);
 }
 
 /**
--- a/drivers/net/ethernet/huawei/hinic/hinic_main.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_main.c
@@ -483,7 +483,6 @@ static int hinic_close(struct net_device
 {
 	struct hinic_dev *nic_dev = netdev_priv(netdev);
 	unsigned int flags;
-	int err;
 
 	down(&nic_dev->mgmt_lock);
 
@@ -497,20 +496,9 @@ static int hinic_close(struct net_device
 
 	up(&nic_dev->mgmt_lock);
 
-	err = hinic_port_set_func_state(nic_dev, HINIC_FUNC_PORT_DISABLE);
-	if (err) {
-		netif_err(nic_dev, drv, netdev,
-			  "Failed to set func port state\n");
-		nic_dev->flags |= (flags & HINIC_INTF_UP);
-		return err;
-	}
-
-	err = hinic_port_set_state(nic_dev, HINIC_PORT_DISABLE);
-	if (err) {
-		netif_err(nic_dev, drv, netdev, "Failed to set port state\n");
-		nic_dev->flags |= (flags & HINIC_INTF_UP);
-		return err;
-	}
+	hinic_port_set_state(nic_dev, HINIC_PORT_DISABLE);
+
+	hinic_port_set_func_state(nic_dev, HINIC_FUNC_PORT_DISABLE);
 
 	if (nic_dev->flags & HINIC_RSS_ENABLE) {
 		hinic_rss_deinit(nic_dev);

[PATCH 5.4 030/147] net: dsa: loop: Add module soft dependency

[Greg Kroah-Hartman]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 3047211ca11bf77b3ecbce045c0aa544d934b945 ]

There is a soft dependency against dsa_loop_bdinfo.ko which sets up the
MDIO device registration, since there are no symbols referenced by
dsa_loop.ko, there is no automatic loading of dsa_loop_bdinfo.ko which
is needed.

Fixes: 98cd1552ea27 ("net: dsa: Mock-up driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/dsa_loop.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/dsa/dsa_loop.c
+++ b/drivers/net/dsa/dsa_loop.c
@@ -356,6 +356,7 @@ static void __exit dsa_loop_exit(void)
 }
 module_exit(dsa_loop_exit);
 
+MODULE_SOFTDEP("pre: dsa_loop_bdinfo");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Florian Fainelli");
 MODULE_DESCRIPTION("DSA loopback driver");

[PATCH 5.4 031/147] net: ipv4: really enforce backoff for redirects

[Greg Kroah-Hartman]

From: Paolo Abeni <pabeni@redhat.com>

[ Upstream commit 57644431a6c2faac5d754ebd35780cf43a531b1a ]

In commit b406472b5ad7 ("net: ipv4: avoid mixed n_redirects and
rate_tokens usage") I missed the fact that a 0 'rate_tokens' will
bypass the backoff algorithm.

Since rate_tokens is cleared after a redirect silence, and never
incremented on redirects, if the host keeps receiving packets
requiring redirect it will reply ignoring the backoff.

Additionally, the 'rate_last' field will be updated with the
cadence of the ingress packet requiring redirect. If that rate is
high enough, that will prevent the host from generating any
other kind of ICMP messages

The check for a zero 'rate_tokens' value was likely a shortcut
to avoid the more complex backoff algorithm after a redirect
silence period. Address the issue checking for 'n_redirects'
instead, which is incremented on successful redirect, and
does not interfere with other ICMP replies.

Fixes: b406472b5ad7 ("net: ipv4: avoid mixed n_redirects and rate_tokens usage")
Reported-and-tested-by: Colin Walters <walters@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/route.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -914,7 +914,7 @@ void ip_rt_send_redirect(struct sk_buff
 	/* Check for load limit; set rate_last to the latest sent
 	 * redirect.
 	 */
-	if (peer->rate_tokens == 0 ||
+	if (peer->n_redirects == 0 ||
 	    time_after(jiffies,
 		       (peer->rate_last +
 			(ip_rt_redirect_load << peer->n_redirects)))) {

[PATCH 5.4 032/147] netprio_cgroup: Fix unlimited memory leak of v2 cgroups

[Greg Kroah-Hartman]

From: Zefan Li <lizefan@huawei.com>

[ Upstream commit 090e28b229af92dc5b40786ca673999d59e73056 ]

If systemd is configured to use hybrid mode which enables the use of
both cgroup v1 and v2, systemd will create new cgroup on both the default
root (v2) and netprio_cgroup hierarchy (v1) for a new session and attach
task to the two cgroups. If the task does some network thing then the v2
cgroup can never be freed after the session exited.

One of our machines ran into OOM due to this memory leak.

In the scenario described above when sk_alloc() is called
cgroup_sk_alloc() thought it's in v2 mode, so it stores
the cgroup pointer in sk->sk_cgrp_data and increments
the cgroup refcnt, but then sock_update_netprioidx()
thought it's in v1 mode, so it stores netprioidx value
in sk->sk_cgrp_data, so the cgroup refcnt will never be freed.

Currently we do the mode switch when someone writes to the ifpriomap
cgroup control file. The easiest fix is to also do the switch when
a task is attached to a new cgroup.

Fixes: bd1060a1d671 ("sock, cgroup: add sock->sk_cgroup")
Reported-by: Yang Yingliang <yangyingliang@huawei.com>
Tested-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/netprio_cgroup.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/core/netprio_cgroup.c
+++ b/net/core/netprio_cgroup.c
@@ -236,6 +236,8 @@ static void net_prio_attach(struct cgrou
 	struct task_struct *p;
 	struct cgroup_subsys_state *css;
 
+	cgroup_sk_alloc_disable();
+
 	cgroup_taskset_for_each(p, css, tset) {
 		void *v = (void *)(unsigned long)css->cgroup->id;
 

[PATCH 5.4 033/147] net: tcp: fix rx timestamp behavior for tcp_recvmsg

[Greg Kroah-Hartman]

From: Kelly Littlepage <kelly@onechronos.com>

[ Upstream commit cc4de047b33be247f9c8150d3e496743a49642b8 ]

The stated intent of the original commit is to is to "return the timestamp
corresponding to the highest sequence number data returned." The current
implementation returns the timestamp for the last byte of the last fully
read skb, which is not necessarily the last byte in the recv buffer. This
patch converts behavior to the original definition, and to the behavior of
the previous draft versions of commit 98aaa913b4ed ("tcp: Extend
SOF_TIMESTAMPING_RX_SOFTWARE to TCP recvmsg") which also match this
behavior.

Fixes: 98aaa913b4ed ("tcp: Extend SOF_TIMESTAMPING_RX_SOFTWARE to TCP recvmsg")
Co-developed-by: Iris Liu <iris@onechronos.com>
Signed-off-by: Iris Liu <iris@onechronos.com>
Signed-off-by: Kelly Littlepage <kelly@onechronos.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -2158,13 +2158,15 @@ skip_copy:
 			tp->urg_data = 0;
 			tcp_fast_path_check(sk);
 		}
-		if (used + offset < skb->len)
-			continue;
 
 		if (TCP_SKB_CB(skb)->has_rxtstamp) {
 			tcp_update_recv_tstamps(skb, &tss);
 			cmsg_flags |= 2;
 		}
+
+		if (used + offset < skb->len)
+			continue;
+
 		if (TCP_SKB_CB(skb)->tcp_flags & TCPHDR_FIN)
 			goto found_fin_ok;
 		if (!(flags & MSG_PEEK))

[PATCH 5.4 034/147] nfp: abm: fix error return code in nfp_abm_vnic_alloc()

[Greg Kroah-Hartman]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit 5099dea0a59f1c89525bb0ceac36689178a4c125 ]

Fix to return negative error code -ENOMEM from the kzalloc() error
handling case instead of 0, as done elsewhere in this function.

Fixes: 174ab544e3bc ("nfp: abm: add cls_u32 offload for simple band classification")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/netronome/nfp/abm/main.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/netronome/nfp/abm/main.c
+++ b/drivers/net/ethernet/netronome/nfp/abm/main.c
@@ -333,8 +333,10 @@ nfp_abm_vnic_alloc(struct nfp_app *app,
 		goto err_free_alink;
 
 	alink->prio_map = kzalloc(abm->prio_map_len, GFP_KERNEL);
-	if (!alink->prio_map)
+	if (!alink->prio_map) {
+		err = -ENOMEM;
 		goto err_free_alink;
+	}
 
 	/* This is a multi-host app, make sure MAC/PHY is up, but don't
 	 * make the MAC/PHY state follow the state of any of the ports.

[PATCH 5.4 035/147] r8169: re-establish support for RTL8401 chip version

[Greg Kroah-Hartman]

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit 1f8492df081bd66255764f3ce82ba1b2c37def49 ]

r8169 never had native support for the RTL8401, however it reportedly
worked with the fallback to RTL8101e [0]. Therefore let's add this
as an explicit assignment.

[0] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=956868

Fixes: b4cc2dcc9c7c ("r8169: remove default chip versions")
Reported-by: Camaleón <noelamac@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/realtek/r8169_main.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -2202,6 +2202,8 @@ static void rtl8169_get_mac_version(stru
 		{ 0x7cf, 0x348,	RTL_GIGA_MAC_VER_07 },
 		{ 0x7cf, 0x248,	RTL_GIGA_MAC_VER_07 },
 		{ 0x7cf, 0x340,	RTL_GIGA_MAC_VER_13 },
+		/* RTL8401, reportedly works if treated as RTL8101e */
+		{ 0x7cf, 0x240,	RTL_GIGA_MAC_VER_13 },
 		{ 0x7cf, 0x343,	RTL_GIGA_MAC_VER_10 },
 		{ 0x7cf, 0x342,	RTL_GIGA_MAC_VER_16 },
 		{ 0x7c8, 0x348,	RTL_GIGA_MAC_VER_09 },

[PATCH 5.4 036/147] umh: fix memory leak on execve failure

[Greg Kroah-Hartman]

From: Vincent Minet <v.minet@criteo.com>

[ Upstream commit db803036ada7d61d096783726f9771b3fc540370 ]

If a UMH process created by fork_usermode_blob() fails to execute,
a pair of struct file allocated by umh_pipe_setup() will leak.

Under normal conditions, the caller (like bpfilter) needs to manage the
lifetime of the UMH and its two pipes. But when fork_usermode_blob()
fails, the caller doesn't really have a way to know what needs to be
done. It seems better to do the cleanup ourselves in this case.

Fixes: 449325b52b7a ("umh: introduce fork_usermode_blob() helper")
Signed-off-by: Vincent Minet <v.minet@criteo.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/umh.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/kernel/umh.c
+++ b/kernel/umh.c
@@ -475,6 +475,12 @@ static void umh_clean_and_save_pid(struc
 {
 	struct umh_info *umh_info = info->data;
 
+	/* cleanup if umh_pipe_setup() was successful but exec failed */
+	if (info->pid && info->retval) {
+		fput(umh_info->pipe_to_umh);
+		fput(umh_info->pipe_from_umh);
+	}
+
 	argv_free(info->argv);
 	umh_info->pid = info->pid;
 }

[PATCH 5.4 037/147] riscv: fix vdso build with lld

[Greg Kroah-Hartman]

From: Ilie Halip <ilie.halip@gmail.com>

[ Upstream commit 3c1918c8f54166598195d938564072664a8275b1 ]

When building with the LLVM linker this error occurrs:
    LD      arch/riscv/kernel/vdso/vdso-syms.o
  ld.lld: error: no input files

This happens because the lld treats -R as an alias to -rpath, as opposed
to ld where -R means --just-symbols.

Use the long option name for compatibility between the two.

Link: https://github.com/ClangBuiltLinux/linux/issues/805
Reported-by: Dmitry Golovin <dima@golovin.in>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/kernel/vdso/Makefile | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile
index 33b16f4212f7a..a4ee3a0e7d20d 100644
--- a/arch/riscv/kernel/vdso/Makefile
+++ b/arch/riscv/kernel/vdso/Makefile
@@ -33,15 +33,15 @@ $(obj)/vdso.so.dbg: $(src)/vdso.lds $(obj-vdso) FORCE
 	$(call if_changed,vdsold)
 
 # We also create a special relocatable object that should mirror the symbol
-# table and layout of the linked DSO.  With ld -R we can then refer to
-# these symbols in the kernel code rather than hand-coded addresses.
+# table and layout of the linked DSO. With ld --just-symbols we can then
+# refer to these symbols in the kernel code rather than hand-coded addresses.
 
 SYSCFLAGS_vdso.so.dbg = -shared -s -Wl,-soname=linux-vdso.so.1 \
 	-Wl,--build-id -Wl,--hash-style=both
 $(obj)/vdso-dummy.o: $(src)/vdso.lds $(obj)/rt_sigreturn.o FORCE
 	$(call if_changed,vdsold)
 
-LDFLAGS_vdso-syms.o := -r -R
+LDFLAGS_vdso-syms.o := -r --just-symbols
 $(obj)/vdso-syms.o: $(obj)/vdso-dummy.o FORCE
 	$(call if_changed,ld)
 
-- 
2.20.1

[PATCH 5.4 038/147] dmaengine: pch_dma.c: Avoid data race between probe and irq handler

[Greg Kroah-Hartman]

From: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>

[ Upstream commit 2e45676a4d33af47259fa186ea039122ce263ba9 ]

pd->dma.dev is read in irq handler pd_irq().
However, it is set to pdev->dev after request_irq().
Therefore, set pd->dma.dev to pdev->dev before request_irq() to
avoid data race between pch_dma_probe() and pd_irq().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Link: https://lore.kernel.org/r/20200416062335.29223-1-madhuparnabhowmik10@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/pch_dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c
index 581e7a290d98e..a3b0b4c56a190 100644
--- a/drivers/dma/pch_dma.c
+++ b/drivers/dma/pch_dma.c
@@ -865,6 +865,7 @@ static int pch_dma_probe(struct pci_dev *pdev,
 	}
 
 	pci_set_master(pdev);
+	pd->dma.dev = &pdev->dev;
 
 	err = request_irq(pdev->irq, pd_irq, IRQF_SHARED, DRV_NAME, pd);
 	if (err) {
@@ -880,7 +881,6 @@ static int pch_dma_probe(struct pci_dev *pdev,
 		goto err_free_irq;
 	}
 
-	pd->dma.dev = &pdev->dev;
 
 	INIT_LIST_HEAD(&pd->dma.channels);
 
-- 
2.20.1

[PATCH 5.4 039/147] dmaengine: mmp_tdma: Do not ignore slave config validation errors

[Greg Kroah-Hartman]

From: Lubomir Rintel <lkundrak@v3.sk>

[ Upstream commit 363c32701c7fdc8265a84b21a6a4f45d1202b9ca ]

With an invalid dma_slave_config set previously,
mmp_tdma_prep_dma_cyclic() would detect an error whilst configuring the
channel, but proceed happily on:

  [  120.756530] mmp-tdma d42a0800.adma: mmp_tdma: unknown burst size.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200419164912.670973-2-lkundrak@v3.sk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/mmp_tdma.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/mmp_tdma.c b/drivers/dma/mmp_tdma.c
index e7d1e12bf4643..4d5b987e4841a 100644
--- a/drivers/dma/mmp_tdma.c
+++ b/drivers/dma/mmp_tdma.c
@@ -443,7 +443,8 @@ static struct dma_async_tx_descriptor *mmp_tdma_prep_dma_cyclic(
 	if (!desc)
 		goto err_out;
 
-	mmp_tdma_config_write(chan, direction, &tdmac->slave_config);
+	if (mmp_tdma_config_write(chan, direction, &tdmac->slave_config))
+		goto err_out;
 
 	while (buf < buf_len) {
 		desc = &tdmac->desc_arr[i];
-- 
2.20.1

[PATCH 5.4 040/147] dmaengine: mmp_tdma: Reset channel error on release

[Greg Kroah-Hartman]

From: Lubomir Rintel <lkundrak@v3.sk>

[ Upstream commit 0c89446379218698189a47871336cb30286a7197 ]

When a channel configuration fails, the status of the channel is set to
DEV_ERROR so that an attempt to submit it fails. However, this status
sticks until the heat end of the universe, making it impossible to
recover from the error.

Let's reset it when the channel is released so that further use of the
channel with correct configuration is not impacted.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200419164912.670973-5-lkundrak@v3.sk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/mmp_tdma.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/dma/mmp_tdma.c b/drivers/dma/mmp_tdma.c
index 4d5b987e4841a..89d90c456c0ce 100644
--- a/drivers/dma/mmp_tdma.c
+++ b/drivers/dma/mmp_tdma.c
@@ -363,6 +363,8 @@ static void mmp_tdma_free_descriptor(struct mmp_tdma_chan *tdmac)
 		gen_pool_free(gpool, (unsigned long)tdmac->desc_arr,
 				size);
 	tdmac->desc_arr = NULL;
+	if (tdmac->status == DMA_ERROR)
+		tdmac->status = DMA_COMPLETE;
 
 	return;
 }
-- 
2.20.1

[PATCH 5.4 041/147] selftests/ftrace: Check the first record for kprobe_args_type.tc

[Greg Kroah-Hartman]

From: Xiao Yang <yangx.jy@cn.fujitsu.com>

[ Upstream commit f0c0d0cf590f71b2213b29a7ded2cde3d0a1a0ba ]

It is possible to get multiple records from trace during test and then more
than 4 arguments are assigned to ARGS.  This situation results in the failure
of kprobe_args_type.tc.  For example:
-----------------------------------------------------------
grep testprobe trace
   ftracetest-5902  [001] d... 111195.682227: testprobe: (_do_fork+0x0/0x460) arg1=334823024 arg2=334823024 arg3=0x13f4fe70 arg4=7
     pmlogger-5949  [000] d... 111195.709898: testprobe: (_do_fork+0x0/0x460) arg1=345308784 arg2=345308784 arg3=0x1494fe70 arg4=7
 grep testprobe trace
 sed -e 's/.* arg1=\(.*\) arg2=\(.*\) arg3=\(.*\) arg4=\(.*\)/\1 \2 \3 \4/'
ARGS='334823024 334823024 0x13f4fe70 7
345308784 345308784 0x1494fe70 7'
-----------------------------------------------------------

We don't care which process calls do_fork so just check the first record to
fix the issue.

Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc  | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc
index 1bcb67dcae267..81490ecaaa927 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc
@@ -38,7 +38,7 @@ for width in 64 32 16 8; do
   echo 0 > events/kprobes/testprobe/enable
 
   : "Confirm the arguments is recorded in given types correctly"
-  ARGS=`grep "testprobe" trace | sed -e 's/.* arg1=\(.*\) arg2=\(.*\) arg3=\(.*\) arg4=\(.*\)/\1 \2 \3 \4/'`
+  ARGS=`grep "testprobe" trace | head -n 1 | sed -e 's/.* arg1=\(.*\) arg2=\(.*\) arg3=\(.*\) arg4=\(.*\)/\1 \2 \3 \4/'`
   check_types $ARGS $width
 
   : "Clear event for next loop"
-- 
2.20.1

[PATCH 5.4 042/147] cpufreq: intel_pstate: Only mention the BIOS disabling turbo mode once

[Greg Kroah-Hartman]

From: Chris Wilson <chris@chris-wilson.co.uk>

[ Upstream commit 8c539776ac83c0857395e1ccc9c6b516521a2d32 ]

Make a note of the first time we discover the turbo mode has been
disabled by the BIOS, as otherwise we complain every time we try to
update the mode.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/intel_pstate.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index 45499e0b9f2f3..d3d7c4ef7d045 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -1058,7 +1058,7 @@ static ssize_t store_no_turbo(struct kobject *a, struct kobj_attribute *b,
 
 	update_turbo_state();
 	if (global.turbo_disabled) {
-		pr_warn("Turbo disabled by BIOS or unavailable on processor\n");
+		pr_notice_once("Turbo disabled by BIOS or unavailable on processor\n");
 		mutex_unlock(&intel_pstate_limits_lock);
 		mutex_unlock(&intel_pstate_driver_lock);
 		return -EPERM;
-- 
2.20.1

[PATCH 5.4 043/147] ALSA: hda/hdmi: fix race in monitor detection during probe

[Greg Kroah-Hartman]

From: Kai Vehmanen <kai.vehmanen@linux.intel.com>

[ Upstream commit ca76282b6faffc83601c25bd2a95f635c03503ef ]

A race exists between build_pcms() and build_controls() phases of codec
setup. Build_pcms() sets up notifier for jack events. If a monitor event
is received before build_controls() is run, the initial jack state is
lost and never reported via mixer controls.

The problem can be hit at least with SOF as the controller driver. SOF
calls snd_hda_codec_build_controls() in its workqueue-based probe and
this can be delayed enough to hit the race condition.

Fix the issue by invalidating the per-pin ELD information when
build_controls() is called. The existing call to hdmi_present_sense()
will update the ELD contents. This ensures initial monitor state is
correctly reflected via mixer controls.

BugLink: https://github.com/thesofproject/linux/issues/1687
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200428123836.24512-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_hdmi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 663168ddce722..d48263d1f6a24 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -2234,7 +2234,9 @@ static int generic_hdmi_build_controls(struct hda_codec *codec)
 
 	for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
 		struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
+		struct hdmi_eld *pin_eld = &per_pin->sink_eld;
 
+		pin_eld->eld_valid = false;
 		hdmi_present_sense(per_pin, 0);
 	}
 
-- 
2.20.1

[PATCH 5.4 044/147] drm/amd/powerplay: avoid using pm_en before it is initialized revised

[Greg Kroah-Hartman]

From: Tiecheng Zhou <Tiecheng.Zhou@amd.com>

[ Upstream commit 690ae30be163d5262feae01335b2a6f30569e5aa ]

hwmgr->pm_en is initialized at hwmgr_hw_init.

during amdgpu_device_init, there is amdgpu_asic_reset that calls to
soc15_asic_reset (for V320 usecase, Vega10 asic), in which:
1) soc15_asic_reset_method calls to pp_get_asic_baco_capability (pm_en)
2) soc15_asic_baco_reset calls to pp_set_asic_baco_state (pm_en)

pm_en is used in the above two cases while it has not yet been initialized

So avoid using pm_en in the above two functions for V320 passthrough.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/powerplay/amd_powerplay.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
index d306cc7119976..8bb5fbef7de0f 100644
--- a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
+++ b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
@@ -1425,7 +1425,8 @@ static int pp_get_asic_baco_capability(void *handle, bool *cap)
 	if (!hwmgr)
 		return -EINVAL;
 
-	if (!hwmgr->pm_en || !hwmgr->hwmgr_func->get_asic_baco_capability)
+	if (!(hwmgr->not_vf && amdgpu_dpm) ||
+		!hwmgr->hwmgr_func->get_asic_baco_capability)
 		return 0;
 
 	mutex_lock(&hwmgr->smu_lock);
@@ -1459,7 +1460,8 @@ static int pp_set_asic_baco_state(void *handle, int state)
 	if (!hwmgr)
 		return -EINVAL;
 
-	if (!hwmgr->pm_en || !hwmgr->hwmgr_func->set_asic_baco_state)
+	if (!(hwmgr->not_vf && amdgpu_dpm) ||
+		!hwmgr->hwmgr_func->set_asic_baco_state)
 		return 0;
 
 	mutex_lock(&hwmgr->smu_lock);
-- 
2.20.1

[PATCH 5.4 045/147] drm/amd/display: check if REFCLK_CNTL register is present

[Greg Kroah-Hartman]

From: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>

[ Upstream commit 3159d41db3a04330c31ece32f8b29752fc114848 ]

Check before programming the register since it isn't present on
all IPs using this code.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
index e933f6a369f92..083c42e521f5c 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
@@ -2015,7 +2015,8 @@ static void dcn20_fpga_init_hw(struct dc *dc)
 
 	REG_UPDATE(DCHUBBUB_GLOBAL_TIMER_CNTL, DCHUBBUB_GLOBAL_TIMER_REFDIV, 2);
 	REG_UPDATE(DCHUBBUB_GLOBAL_TIMER_CNTL, DCHUBBUB_GLOBAL_TIMER_ENABLE, 1);
-	REG_WRITE(REFCLK_CNTL, 0);
+	if (REG(REFCLK_CNTL))
+		REG_WRITE(REFCLK_CNTL, 0);
 	//
 
 
-- 
2.20.1

[PATCH 5.4 046/147] drm/amd/display: Update downspread percent to match spreadsheet for DCN2.1

[Greg Kroah-Hartman]

From: Sung Lee <sung.lee@amd.com>

[ Upstream commit 668a6741f809f2d15d125cfe2b39661e8f1655ea ]

[WHY]
The downspread percentage was copied over from a previous version
of the display_mode_lib spreadsheet. This value has been updated,
and the previous value is too high to allow for such modes as
4K120hz. The new value is sufficient for such modes.

[HOW]
Update the value in dcn21_resource to match the spreadsheet.

Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
index 161bf7caf3ae0..bb7add5ea2273 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
@@ -247,7 +247,7 @@ struct _vcs_dpi_soc_bounding_box_st dcn2_1_soc = {
 	.dram_channel_width_bytes = 4,
 	.fabric_datapath_to_dcn_data_return_bytes = 32,
 	.dcn_downspread_percent = 0.5,
-	.downspread_percent = 0.5,
+	.downspread_percent = 0.38,
 	.dram_page_open_time_ns = 50.0,
 	.dram_rw_turnaround_time_ns = 17.5,
 	.dram_return_buffer_per_channel_bytes = 8192,
-- 
2.20.1

[PATCH 5.4 047/147] drm/qxl: lost qxl_bo_kunmap_atomic_page in qxl_image_init_helper()

[Greg Kroah-Hartman]

From: Vasily Averin <vvs@virtuozzo.com>

[ Upstream commit 5b5703dbafae74adfbe298a56a81694172caf5e6 ]

v2: removed TODO reminder

Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Link: http://patchwork.freedesktop.org/patch/msgid/a4e0ae09-a73c-1c62-04ef-3f990d41bea9@virtuozzo.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/qxl/qxl_image.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/qxl/qxl_image.c b/drivers/gpu/drm/qxl/qxl_image.c
index 43688ecdd8a04..60ab7151b84dc 100644
--- a/drivers/gpu/drm/qxl/qxl_image.c
+++ b/drivers/gpu/drm/qxl/qxl_image.c
@@ -212,7 +212,8 @@ qxl_image_init_helper(struct qxl_device *qdev,
 		break;
 	default:
 		DRM_ERROR("unsupported image bit depth\n");
-		return -EINVAL; /* TODO: cleanup */
+		qxl_bo_kunmap_atomic_page(qdev, image_bo, ptr);
+		return -EINVAL;
 	}
 	image->u.bitmap.flags = QXL_BITMAP_TOP_DOWN;
 	image->u.bitmap.x = width;
-- 
2.20.1

[PATCH 5.4 048/147] drm/amdgpu: simplify padding calculations (v2)

[Greg Kroah-Hartman]

From: Luben Tuikov <luben.tuikov@amd.com>

[ Upstream commit ce73516d42c9ab011fad498168b892d28e181db4 ]

Simplify padding calculations.

v2: Comment update and spacing.

Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/cik_sdma.c  |  4 ++--
 drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c |  4 ++--
 drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c |  4 ++--
 drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c |  4 ++--
 drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c | 17 ++++++++++++-----
 5 files changed, 20 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/cik_sdma.c b/drivers/gpu/drm/amd/amdgpu/cik_sdma.c
index c45304f1047c5..4af9acc2dc4f9 100644
--- a/drivers/gpu/drm/amd/amdgpu/cik_sdma.c
+++ b/drivers/gpu/drm/amd/amdgpu/cik_sdma.c
@@ -228,7 +228,7 @@ static void cik_sdma_ring_emit_ib(struct amdgpu_ring *ring,
 	u32 extra_bits = vmid & 0xf;
 
 	/* IB packet must end on a 8 DW boundary */
-	cik_sdma_ring_insert_nop(ring, (12 - (lower_32_bits(ring->wptr) & 7)) % 8);
+	cik_sdma_ring_insert_nop(ring, (4 - lower_32_bits(ring->wptr)) & 7);
 
 	amdgpu_ring_write(ring, SDMA_PACKET(SDMA_OPCODE_INDIRECT_BUFFER, 0, extra_bits));
 	amdgpu_ring_write(ring, ib->gpu_addr & 0xffffffe0); /* base must be 32 byte aligned */
@@ -811,7 +811,7 @@ static void cik_sdma_ring_pad_ib(struct amdgpu_ring *ring, struct amdgpu_ib *ib)
 	u32 pad_count;
 	int i;
 
-	pad_count = (8 - (ib->length_dw & 0x7)) % 8;
+	pad_count = (-ib->length_dw) & 7;
 	for (i = 0; i < pad_count; i++)
 		if (sdma && sdma->burst_nop && (i == 0))
 			ib->ptr[ib->length_dw++] =
diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c b/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c
index a101758380130..b6af67f6f2149 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c
@@ -255,7 +255,7 @@ static void sdma_v2_4_ring_emit_ib(struct amdgpu_ring *ring,
 	unsigned vmid = AMDGPU_JOB_GET_VMID(job);
 
 	/* IB packet must end on a 8 DW boundary */
-	sdma_v2_4_ring_insert_nop(ring, (10 - (lower_32_bits(ring->wptr) & 7)) % 8);
+	sdma_v2_4_ring_insert_nop(ring, (2 - lower_32_bits(ring->wptr)) & 7);
 
 	amdgpu_ring_write(ring, SDMA_PKT_HEADER_OP(SDMA_OP_INDIRECT) |
 			  SDMA_PKT_INDIRECT_HEADER_VMID(vmid & 0xf));
@@ -750,7 +750,7 @@ static void sdma_v2_4_ring_pad_ib(struct amdgpu_ring *ring, struct amdgpu_ib *ib
 	u32 pad_count;
 	int i;
 
-	pad_count = (8 - (ib->length_dw & 0x7)) % 8;
+	pad_count = (-ib->length_dw) & 7;
 	for (i = 0; i < pad_count; i++)
 		if (sdma && sdma->burst_nop && (i == 0))
 			ib->ptr[ib->length_dw++] =
diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c
index 5f4e2c616241f..cd3ebed46d05f 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c
@@ -429,7 +429,7 @@ static void sdma_v3_0_ring_emit_ib(struct amdgpu_ring *ring,
 	unsigned vmid = AMDGPU_JOB_GET_VMID(job);
 
 	/* IB packet must end on a 8 DW boundary */
-	sdma_v3_0_ring_insert_nop(ring, (10 - (lower_32_bits(ring->wptr) & 7)) % 8);
+	sdma_v3_0_ring_insert_nop(ring, (2 - lower_32_bits(ring->wptr)) & 7);
 
 	amdgpu_ring_write(ring, SDMA_PKT_HEADER_OP(SDMA_OP_INDIRECT) |
 			  SDMA_PKT_INDIRECT_HEADER_VMID(vmid & 0xf));
@@ -1021,7 +1021,7 @@ static void sdma_v3_0_ring_pad_ib(struct amdgpu_ring *ring, struct amdgpu_ib *ib
 	u32 pad_count;
 	int i;
 
-	pad_count = (8 - (ib->length_dw & 0x7)) % 8;
+	pad_count = (-ib->length_dw) & 7;
 	for (i = 0; i < pad_count; i++)
 		if (sdma && sdma->burst_nop && (i == 0))
 			ib->ptr[ib->length_dw++] =
diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
index 4554e72c83786..23de332f3c6ed 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
@@ -698,7 +698,7 @@ static void sdma_v4_0_ring_emit_ib(struct amdgpu_ring *ring,
 	unsigned vmid = AMDGPU_JOB_GET_VMID(job);
 
 	/* IB packet must end on a 8 DW boundary */
-	sdma_v4_0_ring_insert_nop(ring, (10 - (lower_32_bits(ring->wptr) & 7)) % 8);
+	sdma_v4_0_ring_insert_nop(ring, (2 - lower_32_bits(ring->wptr)) & 7);
 
 	amdgpu_ring_write(ring, SDMA_PKT_HEADER_OP(SDMA_OP_INDIRECT) |
 			  SDMA_PKT_INDIRECT_HEADER_VMID(vmid & 0xf));
@@ -1579,7 +1579,7 @@ static void sdma_v4_0_ring_pad_ib(struct amdgpu_ring *ring, struct amdgpu_ib *ib
 	u32 pad_count;
 	int i;
 
-	pad_count = (8 - (ib->length_dw & 0x7)) % 8;
+	pad_count = (-ib->length_dw) & 7;
 	for (i = 0; i < pad_count; i++)
 		if (sdma && sdma->burst_nop && (i == 0))
 			ib->ptr[ib->length_dw++] =
diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c
index 8493bfbbc1484..2a792d7abe007 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c
@@ -382,8 +382,15 @@ static void sdma_v5_0_ring_emit_ib(struct amdgpu_ring *ring,
 	unsigned vmid = AMDGPU_JOB_GET_VMID(job);
 	uint64_t csa_mc_addr = amdgpu_sdma_get_csa_mc_addr(ring, vmid);
 
-	/* IB packet must end on a 8 DW boundary */
-	sdma_v5_0_ring_insert_nop(ring, (10 - (lower_32_bits(ring->wptr) & 7)) % 8);
+	/* An IB packet must end on a 8 DW boundary--the next dword
+	 * must be on a 8-dword boundary. Our IB packet below is 6
+	 * dwords long, thus add x number of NOPs, such that, in
+	 * modular arithmetic,
+	 * wptr + 6 + x = 8k, k >= 0, which in C is,
+	 * (wptr + 6 + x) % 8 = 0.
+	 * The expression below, is a solution of x.
+	 */
+	sdma_v5_0_ring_insert_nop(ring, (2 - lower_32_bits(ring->wptr)) & 7);
 
 	amdgpu_ring_write(ring, SDMA_PKT_HEADER_OP(SDMA_OP_INDIRECT) |
 			  SDMA_PKT_INDIRECT_HEADER_VMID(vmid & 0xf));
@@ -1086,10 +1093,10 @@ static void sdma_v5_0_vm_set_pte_pde(struct amdgpu_ib *ib,
 }
 
 /**
- * sdma_v5_0_ring_pad_ib - pad the IB to the required number of dw
- *
+ * sdma_v5_0_ring_pad_ib - pad the IB
  * @ib: indirect buffer to fill with padding
  *
+ * Pad the IB with NOPs to a boundary multiple of 8.
  */
 static void sdma_v5_0_ring_pad_ib(struct amdgpu_ring *ring, struct amdgpu_ib *ib)
 {
@@ -1097,7 +1104,7 @@ static void sdma_v5_0_ring_pad_ib(struct amdgpu_ring *ring, struct amdgpu_ib *ib
 	u32 pad_count;
 	int i;
 
-	pad_count = (8 - (ib->length_dw & 0x7)) % 8;
+	pad_count = (-ib->length_dw) & 0x7;
 	for (i = 0; i < pad_count; i++)
 		if (sdma && sdma->burst_nop && (i == 0))
 			ib->ptr[ib->length_dw++] =
-- 
2.20.1

[PATCH 5.4 049/147] drm/amdgpu: invalidate L2 before SDMA IBs (v2)

[Greg Kroah-Hartman]

From: Marek Olšák <marek.olsak@amd.com>

[ Upstream commit fdf83646c0542ecfb9adc4db8f741a1f43dca058 ]

This fixes GPU hangs due to cache coherency issues.

v2: Split the version bump to a separate patch

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/amdgpu/navi10_sdma_pkt_open.h    | 16 ++++++++++++++++
 drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c           | 14 +++++++++++++-
 2 files changed, 29 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/navi10_sdma_pkt_open.h b/drivers/gpu/drm/amd/amdgpu/navi10_sdma_pkt_open.h
index 074a9a09c0a79..a5b60c9a24189 100644
--- a/drivers/gpu/drm/amd/amdgpu/navi10_sdma_pkt_open.h
+++ b/drivers/gpu/drm/amd/amdgpu/navi10_sdma_pkt_open.h
@@ -73,6 +73,22 @@
 #define SDMA_OP_AQL_COPY  0
 #define SDMA_OP_AQL_BARRIER_OR  0
 
+#define SDMA_GCR_RANGE_IS_PA		(1 << 18)
+#define SDMA_GCR_SEQ(x)			(((x) & 0x3) << 16)
+#define SDMA_GCR_GL2_WB			(1 << 15)
+#define SDMA_GCR_GL2_INV		(1 << 14)
+#define SDMA_GCR_GL2_DISCARD		(1 << 13)
+#define SDMA_GCR_GL2_RANGE(x)		(((x) & 0x3) << 11)
+#define SDMA_GCR_GL2_US			(1 << 10)
+#define SDMA_GCR_GL1_INV		(1 << 9)
+#define SDMA_GCR_GLV_INV		(1 << 8)
+#define SDMA_GCR_GLK_INV		(1 << 7)
+#define SDMA_GCR_GLK_WB			(1 << 6)
+#define SDMA_GCR_GLM_INV		(1 << 5)
+#define SDMA_GCR_GLM_WB			(1 << 4)
+#define SDMA_GCR_GL1_RANGE(x)		(((x) & 0x3) << 2)
+#define SDMA_GCR_GLI_INV(x)		(((x) & 0x3) << 0)
+
 /*define for op field*/
 #define SDMA_PKT_HEADER_op_offset 0
 #define SDMA_PKT_HEADER_op_mask   0x000000FF
diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c
index 2a792d7abe007..bd715012185c6 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c
@@ -382,6 +382,18 @@ static void sdma_v5_0_ring_emit_ib(struct amdgpu_ring *ring,
 	unsigned vmid = AMDGPU_JOB_GET_VMID(job);
 	uint64_t csa_mc_addr = amdgpu_sdma_get_csa_mc_addr(ring, vmid);
 
+	/* Invalidate L2, because if we don't do it, we might get stale cache
+	 * lines from previous IBs.
+	 */
+	amdgpu_ring_write(ring, SDMA_PKT_HEADER_OP(SDMA_OP_GCR_REQ));
+	amdgpu_ring_write(ring, 0);
+	amdgpu_ring_write(ring, (SDMA_GCR_GL2_INV |
+				 SDMA_GCR_GL2_WB |
+				 SDMA_GCR_GLM_INV |
+				 SDMA_GCR_GLM_WB) << 16);
+	amdgpu_ring_write(ring, 0xffffff80);
+	amdgpu_ring_write(ring, 0xffff);
+
 	/* An IB packet must end on a 8 DW boundary--the next dword
 	 * must be on a 8-dword boundary. Our IB packet below is 6
 	 * dwords long, thus add x number of NOPs, such that, in
@@ -1607,7 +1619,7 @@ static const struct amdgpu_ring_funcs sdma_v5_0_ring_funcs = {
 		SOC15_FLUSH_GPU_TLB_NUM_WREG * 3 +
 		SOC15_FLUSH_GPU_TLB_NUM_REG_WAIT * 6 * 2 +
 		10 + 10 + 10, /* sdma_v5_0_ring_emit_fence x3 for user fence, vm fence */
-	.emit_ib_size = 7 + 6, /* sdma_v5_0_ring_emit_ib */
+	.emit_ib_size = 5 + 7 + 6, /* sdma_v5_0_ring_emit_ib */
 	.emit_ib = sdma_v5_0_ring_emit_ib,
 	.emit_fence = sdma_v5_0_ring_emit_fence,
 	.emit_pipeline_sync = sdma_v5_0_ring_emit_pipeline_sync,
-- 
2.20.1

[PATCH 5.4 050/147] ipc/util.c: sysvipc_find_ipc() incorrectly updates position index

[Greg Kroah-Hartman]

From: Vasily Averin <vvs@virtuozzo.com>

[ Upstream commit 5e698222c70257d13ae0816720dde57c56f81e15 ]

Commit 89163f93c6f9 ("ipc/util.c: sysvipc_find_ipc() should increase
position index") is causing this bug (seen on 5.6.8):

   # ipcs -q

   ------ Message Queues --------
   key        msqid      owner      perms      used-bytes   messages

   # ipcmk -Q
   Message queue id: 0
   # ipcs -q

   ------ Message Queues --------
   key        msqid      owner      perms      used-bytes   messages
   0x82db8127 0          root       644        0            0

   # ipcmk -Q
   Message queue id: 1
   # ipcs -q

   ------ Message Queues --------
   key        msqid      owner      perms      used-bytes   messages
   0x82db8127 0          root       644        0            0
   0x76d1fb2a 1          root       644        0            0

   # ipcrm -q 0
   # ipcs -q

   ------ Message Queues --------
   key        msqid      owner      perms      used-bytes   messages
   0x76d1fb2a 1          root       644        0            0
   0x76d1fb2a 1          root       644        0            0

   # ipcmk -Q
   Message queue id: 2
   # ipcrm -q 2
   # ipcs -q

   ------ Message Queues --------
   key        msqid      owner      perms      used-bytes   messages
   0x76d1fb2a 1          root       644        0            0
   0x76d1fb2a 1          root       644        0            0

   # ipcmk -Q
   Message queue id: 3
   # ipcrm -q 1
   # ipcs -q

   ------ Message Queues --------
   key        msqid      owner      perms      used-bytes   messages
   0x7c982867 3          root       644        0            0
   0x7c982867 3          root       644        0            0
   0x7c982867 3          root       644        0            0
   0x7c982867 3          root       644        0            0

Whenever an IPC item with a low id is deleted, the items with higher ids
are duplicated, as if filling a hole.

new_pos should jump through hole of unused ids, pos can be updated
inside "for" cycle.

Fixes: 89163f93c6f9 ("ipc/util.c: sysvipc_find_ipc() should increase position index")
Reported-by: Andreas Schwab <schwab@suse.de>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/4921fe9b-9385-a2b4-1dc4-1099be6d2e39@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 ipc/util.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/ipc/util.c b/ipc/util.c
index 594871610d454..1821b6386d3b4 100644
--- a/ipc/util.c
+++ b/ipc/util.c
@@ -764,21 +764,21 @@ static struct kern_ipc_perm *sysvipc_find_ipc(struct ipc_ids *ids, loff_t pos,
 			total++;
 	}
 
-	*new_pos = pos + 1;
+	ipc = NULL;
 	if (total >= ids->in_use)
-		return NULL;
+		goto out;
 
 	for (; pos < ipc_mni; pos++) {
 		ipc = idr_find(&ids->ipcs_idr, pos);
 		if (ipc != NULL) {
 			rcu_read_lock();
 			ipc_lock_object(ipc);
-			return ipc;
+			break;
 		}
 	}
-
-	/* Out of range - return NULL to terminate iteration */
-	return NULL;
+out:
+	*new_pos = pos + 1;
+	return ipc;
 }
 
 static void *sysvipc_proc_next(struct seq_file *s, void *it, loff_t *pos)
-- 
2.20.1

[PATCH 5.4 051/147] ALSA: hda/realtek - Fix S3 pop noise on Dell Wyse

[Greg Kroah-Hartman]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit 52e4e36807aeac1cdd07b14e509c8a64101e1a09 ]

Commit 317d9313925c ("ALSA: hda/realtek - Set default power save node to
0") makes the ALC225 have pop noise on S3 resume and cold boot.

The previous fix enable power save node universally for ALC225, however
it makes some ALC225 systems unable to produce any sound.

So let's only enable power save node for the affected Dell Wyse
platform.

Fixes: 317d9313925c ("ALSA: hda/realtek - Set default power save node to 0")
BugLink: https://bugs.launchpad.net/bugs/1866357
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200503152449.22761-2-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 64270983ab7db..1a01e7c5b6d0a 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5743,6 +5743,15 @@ static void alc233_alc662_fixup_lenovo_dual_codecs(struct hda_codec *codec,
 	}
 }
 
+static void alc225_fixup_s3_pop_noise(struct hda_codec *codec,
+				      const struct hda_fixup *fix, int action)
+{
+	if (action != HDA_FIXUP_ACT_PRE_PROBE)
+		return;
+
+	codec->power_save_node = 1;
+}
+
 /* Forcibly assign NID 0x03 to HP/LO while NID 0x02 to SPK for EQ */
 static void alc274_fixup_bind_dacs(struct hda_codec *codec,
 				    const struct hda_fixup *fix, int action)
@@ -5932,6 +5941,7 @@ enum {
 	ALC233_FIXUP_ACER_HEADSET_MIC,
 	ALC294_FIXUP_LENOVO_MIC_LOCATION,
 	ALC225_FIXUP_DELL_WYSE_MIC_NO_PRESENCE,
+	ALC225_FIXUP_S3_POP_NOISE,
 	ALC700_FIXUP_INTEL_REFERENCE,
 	ALC274_FIXUP_DELL_BIND_DACS,
 	ALC274_FIXUP_DELL_AIO_LINEOUT_VERB,
@@ -6817,6 +6827,12 @@ static const struct hda_fixup alc269_fixups[] = {
 			{ }
 		},
 		.chained = true,
+		.chain_id = ALC225_FIXUP_S3_POP_NOISE
+	},
+	[ALC225_FIXUP_S3_POP_NOISE] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc225_fixup_s3_pop_noise,
+		.chained = true,
 		.chain_id = ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC
 	},
 	[ALC700_FIXUP_INTEL_REFERENCE] = {
-- 
2.20.1

[PATCH 5.4 052/147] gfs2: Another gfs2_walk_metadata fix

[Greg Kroah-Hartman]

From: Andreas Gruenbacher <agruenba@redhat.com>

[ Upstream commit 566a2ab3c9005f62e784bd39022d58d34ef4365c ]

Make sure we don't walk past the end of the metadata in gfs2_walk_metadata: the
inode holds fewer pointers than indirect blocks.

Slightly clean up gfs2_iomap_get.

Fixes: a27a0c9b6a20 ("gfs2: gfs2_walk_metadata fix")
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/bmap.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
index f63df54a08c6c..adbb8fef22162 100644
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -528,10 +528,12 @@ static int gfs2_walk_metadata(struct inode *inode, struct metapath *mp,
 
 		/* Advance in metadata tree. */
 		(mp->mp_list[hgt])++;
-		if (mp->mp_list[hgt] >= sdp->sd_inptrs) {
-			if (!hgt)
+		if (hgt) {
+			if (mp->mp_list[hgt] >= sdp->sd_inptrs)
+				goto lower_metapath;
+		} else {
+			if (mp->mp_list[hgt] >= sdp->sd_diptrs)
 				break;
-			goto lower_metapath;
 		}
 
 fill_up_metapath:
@@ -876,10 +878,9 @@ static int gfs2_iomap_get(struct inode *inode, loff_t pos, loff_t length,
 					ret = -ENOENT;
 					goto unlock;
 				} else {
-					/* report a hole */
 					iomap->offset = pos;
 					iomap->length = length;
-					goto do_alloc;
+					goto hole_found;
 				}
 			}
 			iomap->length = size;
@@ -933,8 +934,6 @@ static int gfs2_iomap_get(struct inode *inode, loff_t pos, loff_t length,
 	return ret;
 
 do_alloc:
-	iomap->addr = IOMAP_NULL_ADDR;
-	iomap->type = IOMAP_HOLE;
 	if (flags & IOMAP_REPORT) {
 		if (pos >= size)
 			ret = -ENOENT;
@@ -956,6 +955,9 @@ static int gfs2_iomap_get(struct inode *inode, loff_t pos, loff_t length,
 		if (pos < size && height == ip->i_height)
 			ret = gfs2_hole_size(inode, lblock, len, mp, iomap);
 	}
+hole_found:
+	iomap->addr = IOMAP_NULL_ADDR;
+	iomap->type = IOMAP_HOLE;
 	goto out;
 }
 
-- 
2.20.1

[PATCH 5.4 053/147] mmc: sdhci-pci-gli: Fix no irq handler from suspend

[Greg Kroah-Hartman]

From: Ben Chuang <ben.chuang@genesyslogic.com.tw>

[ Upstream commit 282ede76e47048eebc8ce5324b412890f0ec0a69 ]

The kernel prints a message similar to
"[   28.881959] do_IRQ: 5.36 No irq handler for vector"
when GL975x resumes from suspend. Implement a resume callback to fix this.

Fixes: 31e43f31890c ("mmc: sdhci-pci-gli: Enable MSI interrupt for GL975x")
Co-developed-by: Renius Chen <renius.chen@genesyslogic.com.tw>
Signed-off-by: Renius Chen <renius.chen@genesyslogic.com.tw>
Tested-by: Dave Flogeras <dflogeras2@gmail.com>
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Tested-by: Vineeth Pillai <vineethrp@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200427103048.20785-1-benchuanggli@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Samuel Zou <zou_wei@huawei.com>
[Samuel Zou: Make sdhci_pci_gli_resume() static]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/sdhci-pci-gli.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
index ce15a05f23d41..ff39d81a5742c 100644
--- a/drivers/mmc/host/sdhci-pci-gli.c
+++ b/drivers/mmc/host/sdhci-pci-gli.c
@@ -334,6 +334,18 @@ static u32 sdhci_gl9750_readl(struct sdhci_host *host, int reg)
 	return value;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int sdhci_pci_gli_resume(struct sdhci_pci_chip *chip)
+{
+	struct sdhci_pci_slot *slot = chip->slots[0];
+
+	pci_free_irq_vectors(slot->chip->pdev);
+	gli_pcie_enable_msi(slot);
+
+	return sdhci_pci_resume_host(chip);
+}
+#endif
+
 static const struct sdhci_ops sdhci_gl9755_ops = {
 	.set_clock		= sdhci_set_clock,
 	.enable_dma		= sdhci_pci_enable_dma,
@@ -348,6 +360,9 @@ const struct sdhci_pci_fixes sdhci_gl9755 = {
 	.quirks2	= SDHCI_QUIRK2_BROKEN_DDR50,
 	.probe_slot	= gli_probe_slot_gl9755,
 	.ops            = &sdhci_gl9755_ops,
+#ifdef CONFIG_PM_SLEEP
+	.resume         = sdhci_pci_gli_resume,
+#endif
 };
 
 static const struct sdhci_ops sdhci_gl9750_ops = {
@@ -366,4 +381,7 @@ const struct sdhci_pci_fixes sdhci_gl9750 = {
 	.quirks2	= SDHCI_QUIRK2_BROKEN_DDR50,
 	.probe_slot	= gli_probe_slot_gl9750,
 	.ops            = &sdhci_gl9750_ops,
+#ifdef CONFIG_PM_SLEEP
+	.resume         = sdhci_pci_gli_resume,
+#endif
 };
-- 
2.20.1

[PATCH 5.4 054/147] IB/hfi1: Fix another case where pq is left on waitlist

[Greg Kroah-Hartman]

From: Mike Marciniszyn <mike.marciniszyn@intel.com>

[ Upstream commit fa8dac3968635dec8518a13ac78d662f2aa88e4d ]

The commit noted below fixed a case where a pq is left on the sdma wait
list.

It however missed another case.

user_sdma_send_pkts() has two calls from hfi1_user_sdma_process_request().

If the first one fails as indicated by -EBUSY, the pq will be placed on
the waitlist as by design.

If the second call then succeeds, the pq is still on the waitlist setting
up a race with the interrupt handler if a subsequent request uses a
different SDMA engine

Fix by deleting the first call.

The use of pcount and the intent to send a short burst of packets followed
by the larger balance of packets was never correctly implemented, because
the two calls always send pcount packets no matter what.  A subsequent
patch will correct that issue.

Fixes: 9a293d1e21a6 ("IB/hfi1: Ensure pq is not left on waitlist")
Link: https://lore.kernel.org/r/20200504130917.175613.43231.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/hfi1/user_sdma.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/infiniband/hw/hfi1/user_sdma.c b/drivers/infiniband/hw/hfi1/user_sdma.c
index 13e4203497b33..a92346e88628b 100644
--- a/drivers/infiniband/hw/hfi1/user_sdma.c
+++ b/drivers/infiniband/hw/hfi1/user_sdma.c
@@ -589,10 +589,6 @@ int hfi1_user_sdma_process_request(struct hfi1_filedata *fd,
 
 	set_comp_state(pq, cq, info.comp_idx, QUEUED, 0);
 	pq->state = SDMA_PKT_Q_ACTIVE;
-	/* Send the first N packets in the request to buy us some time */
-	ret = user_sdma_send_pkts(req, pcount);
-	if (unlikely(ret < 0 && ret != -EBUSY))
-		goto free_req;
 
 	/*
 	 * This is a somewhat blocking send implementation.
-- 
2.20.1

[PATCH 5.4 055/147] ACPI: EC: PM: Avoid premature returns from acpi_s2idle_wake()

[Greg Kroah-Hartman]

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

[ Upstream commit 7b301750f7f8f6503e11f1af4a03832525f58c66 ]

If the EC GPE status is not set after checking all of the other GPEs,
acpi_s2idle_wake() returns 'false', to indicate that the SCI event
that has just triggered is not a system wakeup one, but it does that
without canceling the pending wakeup and re-arming the SCI for system
wakeup which is a mistake, because it may cause s2idle_loop() to busy
spin until the next valid wakeup event.  [If that happens, the first
spurious wakeup is still pending after acpi_s2idle_wake() has
returned, so s2idle_enter() does nothing, acpi_s2idle_wake()
is called again and it sees that the SCI has triggered, but no GPEs
are active, so 'false' is returned again, and so on.]

Fix that by moving all of the GPE checking logic from
acpi_s2idle_wake() to acpi_ec_dispatch_gpe() and making the
latter return 'true' only if a non-EC GPE has triggered and
'false' otherwise, which will cause acpi_s2idle_wake() to
cancel the pending SCI wakeup and re-arm the SCI for system
wakeup regardless of the EC GPE status.

This also addresses a lockup observed on an Elitegroup EF20EA laptop
after attempting to wake it up from suspend-to-idle by a key press.

Fixes: d5406284ff80 ("ACPI: PM: s2idle: Refine active GPEs check")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=207603
Reported-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Fixes: fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system")
Link: https://lore.kernel.org/linux-acpi/CAB4CAwdqo7=MvyG_PE+PGVfeA17AHF5i5JucgaKqqMX6mjArbQ@mail.gmail.com/
Reported-by: Chris Chiu <chiu@endlessm.com>
Tested-by: Chris Chiu <chiu@endlessm.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/ec.c       | 24 ++++++++++++++++--------
 drivers/acpi/internal.h |  1 -
 drivers/acpi/sleep.c    | 14 ++------------
 3 files changed, 18 insertions(+), 21 deletions(-)

diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 5e6c8bfc66125..5b53a66d403df 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -1962,23 +1962,31 @@ void acpi_ec_set_gpe_wake_mask(u8 action)
 		acpi_set_gpe_wake_mask(NULL, first_ec->gpe, action);
 }
 
-bool acpi_ec_other_gpes_active(void)
-{
-	return acpi_any_gpe_status_set(first_ec ? first_ec->gpe : U32_MAX);
-}
-
 bool acpi_ec_dispatch_gpe(void)
 {
 	u32 ret;
 
 	if (!first_ec)
+		return acpi_any_gpe_status_set(U32_MAX);
+
+	/*
+	 * Report wakeup if the status bit is set for any enabled GPE other
+	 * than the EC one.
+	 */
+	if (acpi_any_gpe_status_set(first_ec->gpe))
+		return true;
+
+	if (ec_no_wakeup)
 		return false;
 
+	/*
+	 * Dispatch the EC GPE in-band, but do not report wakeup in any case
+	 * to allow the caller to process events properly after that.
+	 */
 	ret = acpi_dispatch_gpe(NULL, first_ec->gpe);
-	if (ret == ACPI_INTERRUPT_HANDLED) {
+	if (ret == ACPI_INTERRUPT_HANDLED)
 		pm_pr_dbg("EC GPE dispatched\n");
-		return true;
-	}
+
 	return false;
 }
 #endif /* CONFIG_PM_SLEEP */
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index cbf7f34c3ce76..afe6636f9ad39 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -201,7 +201,6 @@ void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit);
 
 #ifdef CONFIG_PM_SLEEP
 void acpi_ec_flush_work(void);
-bool acpi_ec_other_gpes_active(void);
 bool acpi_ec_dispatch_gpe(void);
 #endif
 
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index edad89e58c580..85514c0f3aa53 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -1010,20 +1010,10 @@ static bool acpi_s2idle_wake(void)
 		if (acpi_check_wakeup_handlers())
 			return true;
 
-		/*
-		 * If the status bit is set for any enabled GPE other than the
-		 * EC one, the wakeup is regarded as a genuine one.
-		 */
-		if (acpi_ec_other_gpes_active())
+		/* Check non-EC GPE wakeups and dispatch the EC GPE. */
+		if (acpi_ec_dispatch_gpe())
 			return true;
 
-		/*
-		 * If the EC GPE status bit has not been set, the wakeup is
-		 * regarded as a spurious one.
-		 */
-		if (!acpi_ec_dispatch_gpe())
-			return false;
-
 		/*
 		 * Cancel the wakeup and process all pending events in case
 		 * there are any wakeup ones in there.
-- 
2.20.1

[PATCH 5.4 056/147] pinctrl: sunrisepoint: Fix PAD lock register offset for SPT-H

[Greg Kroah-Hartman]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 6b7275c87717652daace4c0b8131eb184c7d7516 ]

It appears that SPT-H variant has different offset for PAD locking registers.
Fix it here.

Fixes: 551fa5801ef1 ("pinctrl: intel: sunrisepoint: Add Intel Sunrisepoint-H support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/intel/pinctrl-sunrisepoint.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/pinctrl/intel/pinctrl-sunrisepoint.c b/drivers/pinctrl/intel/pinctrl-sunrisepoint.c
index d936e7aa74c4b..7b7736abe9d86 100644
--- a/drivers/pinctrl/intel/pinctrl-sunrisepoint.c
+++ b/drivers/pinctrl/intel/pinctrl-sunrisepoint.c
@@ -15,17 +15,18 @@
 
 #include "pinctrl-intel.h"
 
-#define SPT_PAD_OWN	0x020
-#define SPT_PADCFGLOCK	0x0a0
-#define SPT_HOSTSW_OWN	0x0d0
-#define SPT_GPI_IS	0x100
-#define SPT_GPI_IE	0x120
+#define SPT_PAD_OWN		0x020
+#define SPT_H_PADCFGLOCK	0x090
+#define SPT_LP_PADCFGLOCK	0x0a0
+#define SPT_HOSTSW_OWN		0x0d0
+#define SPT_GPI_IS		0x100
+#define SPT_GPI_IE		0x120
 
 #define SPT_COMMUNITY(b, s, e)				\
 	{						\
 		.barno = (b),				\
 		.padown_offset = SPT_PAD_OWN,		\
-		.padcfglock_offset = SPT_PADCFGLOCK,	\
+		.padcfglock_offset = SPT_LP_PADCFGLOCK,	\
 		.hostown_offset = SPT_HOSTSW_OWN,	\
 		.is_offset = SPT_GPI_IS,		\
 		.ie_offset = SPT_GPI_IE,		\
@@ -47,7 +48,7 @@
 	{						\
 		.barno = (b),				\
 		.padown_offset = SPT_PAD_OWN,		\
-		.padcfglock_offset = SPT_PADCFGLOCK,	\
+		.padcfglock_offset = SPT_H_PADCFGLOCK,	\
 		.hostown_offset = SPT_HOSTSW_OWN,	\
 		.is_offset = SPT_GPI_IS,		\
 		.ie_offset = SPT_GPI_IE,		\
-- 
2.20.1

[PATCH 5.4 057/147] pinctrl: baytrail: Enable pin configuration setting for GPIO chip

[Greg Kroah-Hartman]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit ccd025eaddaeb99e982029446197c544252108e2 ]

It appears that pin configuration for GPIO chip hasn't been enabled yet
due to absence of ->set_config() callback.

Enable it here for Intel Baytrail.

Fixes: c501d0b149de ("pinctrl: baytrail: Add pin control operations")
Depends-on: 2956b5d94a76 ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/intel/pinctrl-baytrail.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c
index 606fe216f902a..cae7caf5ab282 100644
--- a/drivers/pinctrl/intel/pinctrl-baytrail.c
+++ b/drivers/pinctrl/intel/pinctrl-baytrail.c
@@ -1297,6 +1297,7 @@ static const struct gpio_chip byt_gpio_chip = {
 	.direction_output	= byt_gpio_direction_output,
 	.get			= byt_gpio_get,
 	.set			= byt_gpio_set,
+	.set_config		= gpiochip_generic_config,
 	.dbg_show		= byt_gpio_dbg_show,
 };
 
-- 
2.20.1

[PATCH 5.4 058/147] pinctrl: qcom: fix wrong write in update_dual_edge

[Greg Kroah-Hartman]

From: Ansuel Smith <ansuelsmth@gmail.com>

[ Upstream commit 90bcb0c3ca0809d1ed358bfbf838df4b3d4e58e0 ]

Fix a typo in the readl/writel accessor conversion where val is used
instead of pol changing the behavior of the original code.

Cc: stable@vger.kernel.org
Fixes: 6c73698904aa pinctrl: qcom: Introduce readl/writel accessors
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200414003726.25347-1-ansuelsmth@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/qcom/pinctrl-msm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index 763da0be10d6f..44320322037df 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -688,7 +688,7 @@ static void msm_gpio_update_dual_edge_pos(struct msm_pinctrl *pctrl,
 
 		pol = msm_readl_intr_cfg(pctrl, g);
 		pol ^= BIT(g->intr_polarity_bit);
-		msm_writel_intr_cfg(val, pctrl, g);
+		msm_writel_intr_cfg(pol, pctrl, g);
 
 		val2 = msm_readl_io(pctrl, g) & BIT(g->in_bit);
 		intstat = msm_readl_intr_status(pctrl, g);
-- 
2.20.1

[PATCH 5.4 059/147] pinctrl: cherryview: Add missing spinlock usage in chv_gpio_irq_handler

[Greg Kroah-Hartman]

From: Grace Kao <grace.kao@intel.com>

[ Upstream commit 69388e15f5078c961b9e5319e22baea4c57deff1 ]

According to Braswell NDA Specification Update (#557593),
concurrent read accesses may result in returning 0xffffffff and write
instructions may be dropped. We have an established format for the
commit references, i.e.
cdca06e4e859 ("pinctrl: baytrail: Add missing spinlock usage in
byt_gpio_irq_handler")

Fixes: 0bd50d719b00 ("pinctrl: cherryview: prevent concurrent access to GPIO controllers")
Signed-off-by: Grace Kao <grace.kao@intel.com>
Reported-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/intel/pinctrl-cherryview.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c
index 2c419fa5d1c1b..8f06445a8e39c 100644
--- a/drivers/pinctrl/intel/pinctrl-cherryview.c
+++ b/drivers/pinctrl/intel/pinctrl-cherryview.c
@@ -1474,11 +1474,15 @@ static void chv_gpio_irq_handler(struct irq_desc *desc)
 	struct chv_pinctrl *pctrl = gpiochip_get_data(gc);
 	struct irq_chip *chip = irq_desc_get_chip(desc);
 	unsigned long pending;
+	unsigned long flags;
 	u32 intr_line;
 
 	chained_irq_enter(chip, desc);
 
+	raw_spin_lock_irqsave(&chv_lock, flags);
 	pending = readl(pctrl->regs + CHV_INTSTAT);
+	raw_spin_unlock_irqrestore(&chv_lock, flags);
+
 	for_each_set_bit(intr_line, &pending, pctrl->community->nirqs) {
 		unsigned irq, offset;
 
-- 
2.20.1

[PATCH 5.4 060/147] bpf: Fix error return code in map_lookup_and_delete_elem()

[Greg Kroah-Hartman]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit 7f645462ca01d01abb94d75e6768c8b3ed3a188b ]

Fix to return negative error code -EFAULT from the copy_to_user() error
handling case instead of 0, as done elsewhere in this function.

Fixes: bd513cd08f10 ("bpf: add MAP_LOOKUP_AND_DELETE_ELEM syscall")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200430081851.166996-1-weiyongjun1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/syscall.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index 14f4a76b44d5f..946cfdd3b2cc2 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -1146,8 +1146,10 @@ static int map_lookup_and_delete_elem(union bpf_attr *attr)
 	if (err)
 		goto free_value;
 
-	if (copy_to_user(uvalue, value, value_size) != 0)
+	if (copy_to_user(uvalue, value, value_size) != 0) {
+		err = -EFAULT;
 		goto free_value;
+	}
 
 	err = 0;
 
-- 
2.20.1

[PATCH 5.4 061/147] ALSA: firewire-lib: fix function sizeof not defined error of tracepoints format

[Greg Kroah-Hartman]

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

[ Upstream commit 1034872123a06b759aba772b1c99612ccb8e632a ]

The snd-firewire-lib.ko has 'amdtp-packet' event of tracepoints. Current
printk format for the event includes 'sizeof(u8)' macro expected to be
extended in compilation time. However, this is not done. As a result,
perf tools cannot parse the event for printing:

$ mount -l -t debugfs
debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)
$ cat /sys/kernel/debug/tracing/events/snd_firewire_lib/amdtp_packet/format
...
print fmt: "%02u %04u %04x %04x %02d %03u %02u %03u %02u %01u %02u %s",
  REC->second, REC->cycle, REC->src, REC->dest, REC->channel,
  REC->payload_quadlets, REC->data_blocks, REC->data_block_counter,
  REC->packet_index, REC->irq, REC->index,
  __print_array(__get_dynamic_array(cip_header),
                __get_dynamic_array_len(cip_header),
                sizeof(u8))

$ sudo perf record -e snd_firewire_lib:amdtp_packet
  [snd_firewire_lib:amdtp_packet] function sizeof not defined
  Error: expected type 5 but read 0

This commit fixes it by obsoleting the macro with actual size.

Cc: <stable@vger.kernel.org>
Fixes: bde2bbdb307a ("ALSA: firewire-lib: use dynamic array for CIP header of tracing events")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200503045718.86337-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/firewire/amdtp-stream-trace.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/sound/firewire/amdtp-stream-trace.h b/sound/firewire/amdtp-stream-trace.h
index 16c7f6605511e..26e7cb555d3c5 100644
--- a/sound/firewire/amdtp-stream-trace.h
+++ b/sound/firewire/amdtp-stream-trace.h
@@ -66,8 +66,7 @@ TRACE_EVENT(amdtp_packet,
 		__entry->irq,
 		__entry->index,
 		__print_array(__get_dynamic_array(cip_header),
-			      __get_dynamic_array_len(cip_header),
-			      sizeof(u8)))
+			      __get_dynamic_array_len(cip_header), 1))
 );
 
 #endif
-- 
2.20.1

[PATCH 5.4 062/147] i40iw: Fix error handling in i40iw_manage_arp_cache()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 37e31d2d26a4124506c24e95434e9baf3405a23a ]

The i40iw_arp_table() function can return -EOVERFLOW if
i40iw_alloc_resource() fails so we can't just test for "== -1".

Fixes: 4e9042e647ff ("i40iw: add hw and utils files")
Link: https://lore.kernel.org/r/20200422092211.GA195357@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/i40iw/i40iw_hw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/i40iw/i40iw_hw.c b/drivers/infiniband/hw/i40iw/i40iw_hw.c
index 55a1fbf0e670c..ae8b97c306657 100644
--- a/drivers/infiniband/hw/i40iw/i40iw_hw.c
+++ b/drivers/infiniband/hw/i40iw/i40iw_hw.c
@@ -534,7 +534,7 @@ void i40iw_manage_arp_cache(struct i40iw_device *iwdev,
 	int arp_index;
 
 	arp_index = i40iw_arp_table(iwdev, ip_addr, ipv4, mac_addr, action);
-	if (arp_index == -1)
+	if (arp_index < 0)
 		return;
 	cqp_request = i40iw_get_cqp_request(&iwdev->cqp, false);
 	if (!cqp_request)
-- 
2.20.1

[PATCH 5.4 063/147] drm/i915: Dont enable WaIncreaseLatencyIPCEnabled when IPC is disabled

[Greg Kroah-Hartman]

From: Sultan Alsawaf <sultan@kerneltoast.com>

[ Upstream commit 421abe200321a2c907ede1a6208c558284ba0b75 ]

In commit 5a7d202b1574, a logical AND was erroneously changed to an OR,
causing WaIncreaseLatencyIPCEnabled to be enabled unconditionally for
kabylake and coffeelake, even when IPC is disabled. Fix the logic so
that WaIncreaseLatencyIPCEnabled is only used when IPC is enabled.

Fixes: 5a7d202b1574 ("drm/i915: Drop WaIncreaseLatencyIPCEnabled/1140 for cnl")
Cc: stable@vger.kernel.org # 5.3.x+
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430214654.51314-1-sultan@kerneltoast.com
(cherry picked from commit 690d22dafa88b82453516387b475664047a6bd14)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/i915/intel_pm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 3ccfc025fde21..ade607d93e45d 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4784,7 +4784,7 @@ static void skl_compute_plane_wm(const struct intel_crtc_state *crtc_state,
 	 * WaIncreaseLatencyIPCEnabled: kbl,cfl
 	 * Display WA #1141: kbl,cfl
 	 */
-	if ((IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv)) ||
+	if ((IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv)) &&
 	    dev_priv->ipc_enabled)
 		latency += 4;
 
-- 
2.20.1

[PATCH 5.4 064/147] bpf, sockmap: msg_pop_data can incorrecty set an sge length

[Greg Kroah-Hartman]

From: John Fastabend <john.fastabend@gmail.com>

[ Upstream commit 3e104c23816220919ea1b3fd93fabe363c67c484 ]

When sk_msg_pop() is called where the pop operation is working on
the end of a sge element and there is no additional trailing data
and there _is_ data in front of pop, like the following case,

   |____________a_____________|__pop__|

We have out of order operations where we incorrectly set the pop
variable so that instead of zero'ing pop we incorrectly leave it
untouched, effectively. This can cause later logic to shift the
buffers around believing it should pop extra space. The result is
we have 'popped' more data then we expected potentially breaking
program logic.

It took us a while to hit this case because typically we pop headers
which seem to rarely be at the end of a scatterlist elements but
we can't rely on this.

Fixes: 7246d8ed4dcce ("bpf: helper to pop data from messages")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/158861288359.14306.7654891716919968144.stgit@john-Precision-5820-Tower
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/filter.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/filter.c b/net/core/filter.c
index d59dbc88fef5d..f1f2304822e3b 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -2590,8 +2590,8 @@ BPF_CALL_4(bpf_msg_pop_data, struct sk_msg *, msg, u32, start,
 			}
 			pop = 0;
 		} else if (pop >= sge->length - a) {
-			sge->length = a;
 			pop -= (sge->length - a);
+			sge->length = a;
 		}
 	}
 
-- 
2.20.1

[PATCH 5.4 065/147] bpf, sockmap: bpf_tcp_ingress needs to subtract bytes from sg.size

[Greg Kroah-Hartman]

From: John Fastabend <john.fastabend@gmail.com>

[ Upstream commit 81aabbb9fb7b4b1efd073b62f0505d3adad442f3 ]

In bpf_tcp_ingress we used apply_bytes to subtract bytes from sg.size
which is used to track total bytes in a message. But this is not
correct because apply_bytes is itself modified in the main loop doing
the mem_charge.

Then at the end of this we have sg.size incorrectly set and out of
sync with actual sk values. Then we can get a splat if we try to
cork the data later and again try to redirect the msg to ingress. To
fix instead of trying to track msg.size do the easy thing and include
it as part of the sk_msg_xfer logic so that when the msg is moved the
sg.size is always correct.

To reproduce the below users will need ingress + cork and hit an
error path that will then try to 'free' the skmsg.

[  173.699981] BUG: KASAN: null-ptr-deref in sk_msg_free_elem+0xdd/0x120
[  173.699987] Read of size 8 at addr 0000000000000008 by task test_sockmap/5317

[  173.700000] CPU: 2 PID: 5317 Comm: test_sockmap Tainted: G          I       5.7.0-rc1+ #43
[  173.700005] Hardware name: Dell Inc. Precision 5820 Tower/002KVM, BIOS 1.9.2 01/24/2019
[  173.700009] Call Trace:
[  173.700021]  dump_stack+0x8e/0xcb
[  173.700029]  ? sk_msg_free_elem+0xdd/0x120
[  173.700034]  ? sk_msg_free_elem+0xdd/0x120
[  173.700042]  __kasan_report+0x102/0x15f
[  173.700052]  ? sk_msg_free_elem+0xdd/0x120
[  173.700060]  kasan_report+0x32/0x50
[  173.700070]  sk_msg_free_elem+0xdd/0x120
[  173.700080]  __sk_msg_free+0x87/0x150
[  173.700094]  tcp_bpf_send_verdict+0x179/0x4f0
[  173.700109]  tcp_bpf_sendpage+0x3ce/0x5d0

Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/158861290407.14306.5327773422227552482.stgit@john-Precision-5820-Tower
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/skmsg.h | 1 +
 net/ipv4/tcp_bpf.c    | 1 -
 2 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/skmsg.h b/include/linux/skmsg.h
index 7eb6a8754f19a..a3adbe593505d 100644
--- a/include/linux/skmsg.h
+++ b/include/linux/skmsg.h
@@ -186,6 +186,7 @@ static inline void sk_msg_xfer(struct sk_msg *dst, struct sk_msg *src,
 	dst->sg.data[which] = src->sg.data[which];
 	dst->sg.data[which].length  = size;
 	dst->sg.size		   += size;
+	src->sg.size		   -= size;
 	src->sg.data[which].length -= size;
 	src->sg.data[which].offset += size;
 }
diff --git a/net/ipv4/tcp_bpf.c b/net/ipv4/tcp_bpf.c
index 8a01428f80c1c..19bd10e6ab830 100644
--- a/net/ipv4/tcp_bpf.c
+++ b/net/ipv4/tcp_bpf.c
@@ -200,7 +200,6 @@ static int bpf_tcp_ingress(struct sock *sk, struct sk_psock *psock,
 
 	if (!ret) {
 		msg->sg.start = i;
-		msg->sg.size -= apply_bytes;
 		sk_psock_queue_msg(psock, tmp);
 		sk_psock_data_ready(sk, psock);
 	} else {
-- 
2.20.1

[PATCH 5.4 066/147] mmc: alcor: Fix a resource leak in the error path for ->probe()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 7c277dd2b0ff6a16f1732a66c2c52a29f067163e ]

If devm_request_threaded_irq() fails, the allocated struct mmc_host needs
to be freed via calling mmc_free_host(), so let's do that.

Fixes: c5413ad815a6 ("mmc: add new Alcor Micro Cardreader SD/MMC driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20200426202355.43055-1-christophe.jaillet@wanadoo.fr
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/alcor.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/alcor.c b/drivers/mmc/host/alcor.c
index 1aee485d56d4c..026ca9194ce5b 100644
--- a/drivers/mmc/host/alcor.c
+++ b/drivers/mmc/host/alcor.c
@@ -1104,7 +1104,7 @@ static int alcor_pci_sdmmc_drv_probe(struct platform_device *pdev)
 
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to get irq for data line\n");
-		return ret;
+		goto free_host;
 	}
 
 	mutex_init(&host->cmd_mutex);
@@ -1116,6 +1116,10 @@ static int alcor_pci_sdmmc_drv_probe(struct platform_device *pdev)
 	dev_set_drvdata(&pdev->dev, host);
 	mmc_add_host(mmc);
 	return 0;
+
+free_host:
+	mmc_free_host(mmc);
+	return ret;
 }
 
 static int alcor_pci_sdmmc_drv_remove(struct platform_device *pdev)
-- 
2.20.1

[PATCH 5.4 067/147] mmc: sdhci-pci-gli: Fix can not access GL9750 after reboot from Windows 10

[Greg Kroah-Hartman]

From: Ben Chuang <ben.chuang@genesyslogic.com.tw>

[ Upstream commit b56ff195c317ad28c05d354aeecbb9995b8e08c1 ]

Need to clear some bits in a vendor-defined register after reboot from
Windows 10.

Fixes: e51df6ce668a ("mmc: host: sdhci-pci: Add Genesys Logic GL975x support")
Reported-by: Grzegorz Kowal <custos.mentis@gmail.com>
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Grzegorz Kowal <custos.mentis@gmail.com>
Link: https://lore.kernel.org/r/20200504063957.6638-1-benchuanggli@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/sdhci-pci-gli.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
index ff39d81a5742c..fd76aa672e020 100644
--- a/drivers/mmc/host/sdhci-pci-gli.c
+++ b/drivers/mmc/host/sdhci-pci-gli.c
@@ -26,6 +26,9 @@
 #define   SDHCI_GLI_9750_DRIVING_2    GENMASK(27, 26)
 #define   GLI_9750_DRIVING_1_VALUE    0xFFF
 #define   GLI_9750_DRIVING_2_VALUE    0x3
+#define   SDHCI_GLI_9750_SEL_1        BIT(29)
+#define   SDHCI_GLI_9750_SEL_2        BIT(31)
+#define   SDHCI_GLI_9750_ALL_RST      (BIT(24)|BIT(25)|BIT(28)|BIT(30))
 
 #define SDHCI_GLI_9750_PLL	      0x864
 #define   SDHCI_GLI_9750_PLL_TX2_INV    BIT(23)
@@ -122,6 +125,8 @@ static void gli_set_9750(struct sdhci_host *host)
 				    GLI_9750_DRIVING_1_VALUE);
 	driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_2,
 				    GLI_9750_DRIVING_2_VALUE);
+	driving_value &= ~(SDHCI_GLI_9750_SEL_1|SDHCI_GLI_9750_SEL_2|SDHCI_GLI_9750_ALL_RST);
+	driving_value |= SDHCI_GLI_9750_SEL_2;
 	sdhci_writel(host, driving_value, SDHCI_GLI_9750_DRIVING);
 
 	sw_ctrl_value &= ~SDHCI_GLI_9750_SW_CTRL_4;
-- 
2.20.1

[PATCH 5.4 068/147] mmc: core: Check request type before completing the request

[Greg Kroah-Hartman]

From: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>

[ Upstream commit e6bfb1bf00852b55f4c771f47ae67004c04d3c87 ]

In the request completion path with CQE, request type is being checked
after the request is getting completed. This is resulting in returning
the wrong request type and leading to the IO hang issue.

ASYNC request type is getting returned for DCMD type requests.
Because of this mismatch, mq->cqe_busy flag is never getting cleared
and the driver is not invoking blk_mq_hw_run_queue. So requests are not
getting dispatched to the LLD from the block layer.

All these eventually leading to IO hang issues.
So, get the request type before completing the request.

Cc: <stable@vger.kernel.org>
Fixes: 1e8e55b67030 ("mmc: block: Add CQE support")
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1588775643-18037-2-git-send-email-vbadigan@codeaurora.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/core/block.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index 95b41c0891d02..9d01b5dca5198 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -1417,6 +1417,7 @@ static void mmc_blk_cqe_complete_rq(struct mmc_queue *mq, struct request *req)
 	struct mmc_request *mrq = &mqrq->brq.mrq;
 	struct request_queue *q = req->q;
 	struct mmc_host *host = mq->card->host;
+	enum mmc_issue_type issue_type = mmc_issue_type(mq, req);
 	unsigned long flags;
 	bool put_card;
 	int err;
@@ -1446,7 +1447,7 @@ static void mmc_blk_cqe_complete_rq(struct mmc_queue *mq, struct request *req)
 
 	spin_lock_irqsave(&mq->lock, flags);
 
-	mq->in_flight[mmc_issue_type(mq, req)] -= 1;
+	mq->in_flight[issue_type] -= 1;
 
 	put_card = (mmc_tot_in_flight(mq) == 0);
 
-- 
2.20.1

[PATCH 5.4 069/147] mmc: core: Fix recursive locking issue in CQE recovery path

[Greg Kroah-Hartman]

From: Sarthak Garg <sartgarg@codeaurora.org>

[ Upstream commit 39a22f73744d5baee30b5f134ae2e30b668b66ed ]

Consider the following stack trace

-001|raw_spin_lock_irqsave
-002|mmc_blk_cqe_complete_rq
-003|__blk_mq_complete_request(inline)
-003|blk_mq_complete_request(rq)
-004|mmc_cqe_timed_out(inline)
-004|mmc_mq_timed_out

mmc_mq_timed_out acquires the queue_lock for the first
time. The mmc_blk_cqe_complete_rq function also tries to acquire
the same queue lock resulting in recursive locking where the task
is spinning for the same lock which it has already acquired leading
to watchdog bark.

Fix this issue with the lock only for the required critical section.

Cc: <stable@vger.kernel.org>
Fixes: 1e8e55b67030 ("mmc: block: Add CQE support")
Suggested-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Sarthak Garg <sartgarg@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1588868135-31783-1-git-send-email-vbadigan@codeaurora.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/core/queue.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/drivers/mmc/core/queue.c b/drivers/mmc/core/queue.c
index 9edc08685e86d..4d1e468d39823 100644
--- a/drivers/mmc/core/queue.c
+++ b/drivers/mmc/core/queue.c
@@ -107,7 +107,7 @@ static enum blk_eh_timer_return mmc_cqe_timed_out(struct request *req)
 	case MMC_ISSUE_DCMD:
 		if (host->cqe_ops->cqe_timeout(host, mrq, &recovery_needed)) {
 			if (recovery_needed)
-				__mmc_cqe_recovery_notifier(mq);
+				mmc_cqe_recovery_notifier(mrq);
 			return BLK_EH_RESET_TIMER;
 		}
 		/* No timeout (XXX: huh? comment doesn't make much sense) */
@@ -125,18 +125,13 @@ static enum blk_eh_timer_return mmc_mq_timed_out(struct request *req,
 	struct request_queue *q = req->q;
 	struct mmc_queue *mq = q->queuedata;
 	unsigned long flags;
-	int ret;
+	bool ignore_tout;
 
 	spin_lock_irqsave(&mq->lock, flags);
-
-	if (mq->recovery_needed || !mq->use_cqe)
-		ret = BLK_EH_RESET_TIMER;
-	else
-		ret = mmc_cqe_timed_out(req);
-
+	ignore_tout = mq->recovery_needed || !mq->use_cqe;
 	spin_unlock_irqrestore(&mq->lock, flags);
 
-	return ret;
+	return ignore_tout ? BLK_EH_RESET_TIMER : mmc_cqe_timed_out(req);
 }
 
 static void mmc_mq_recovery_handler(struct work_struct *work)
-- 
2.20.1

[PATCH 5.4 070/147] mmc: block: Fix request completion in the CQE timeout path

[Greg Kroah-Hartman]

From: Adrian Hunter <adrian.hunter@intel.com>

[ Upstream commit c077dc5e0620508a29497dac63a2822324ece52a ]

First, it should be noted that the CQE timeout (60 seconds) is substantial
so a CQE request that times out is really stuck, and the race between
timeout and completion is extremely unlikely. Nevertheless this patch
fixes an issue with it.

Commit ad73d6feadbd7b ("mmc: complete requests from ->timeout")
preserved the existing functionality, to complete the request.
However that had only been necessary because the block layer
timeout handler had been marking the request to prevent it from being
completed normally. That restriction was removed at the same time, the
result being that a request that has gone will have been completed anyway.
That is, the completion was unnecessary.

At the time, the unnecessary completion was harmless because the block
layer would ignore it, although that changed in kernel v5.0.

Note for stable, this patch will not apply cleanly without patch "mmc:
core: Fix recursive locking issue in CQE recovery path"

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: ad73d6feadbd7b ("mmc: complete requests from ->timeout")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200508062227.23144-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/core/queue.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/mmc/core/queue.c b/drivers/mmc/core/queue.c
index 4d1e468d39823..9c0ccb3744c28 100644
--- a/drivers/mmc/core/queue.c
+++ b/drivers/mmc/core/queue.c
@@ -110,8 +110,7 @@ static enum blk_eh_timer_return mmc_cqe_timed_out(struct request *req)
 				mmc_cqe_recovery_notifier(mrq);
 			return BLK_EH_RESET_TIMER;
 		}
-		/* No timeout (XXX: huh? comment doesn't make much sense) */
-		blk_mq_complete_request(req);
+		/* The request has gone already */
 		return BLK_EH_DONE;
 	default:
 		/* Timeout is handled by mmc core */
-- 
2.20.1

[PATCH 5.4 071/147] gfs2: More gfs2_find_jhead fixes

[Greg Kroah-Hartman]

From: Andreas Gruenbacher <agruenba@redhat.com>

[ Upstream commit aa83da7f47b26c9587bade6c4bc4736ffa308f0a ]

It turns out that when extending an existing bio, gfs2_find_jhead fails to
check if the block number is consecutive, which leads to incorrect reads for
fragmented journals.

In addition, limit the maximum bio size to an arbitrary value of 2 megabytes:
since commit 07173c3ec276 ("block: enable multipage bvecs"), if we just keep
adding pages until bio_add_page fails, bios will grow much larger than useful,
which pins more memory than necessary with barely any additional performance
gains.

Fixes: f4686c26ecc3 ("gfs2: read journal in large chunks")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/lops.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/fs/gfs2/lops.c b/fs/gfs2/lops.c
index 7ca84be20cf69..8303b44a50682 100644
--- a/fs/gfs2/lops.c
+++ b/fs/gfs2/lops.c
@@ -264,7 +264,7 @@ static struct bio *gfs2_log_alloc_bio(struct gfs2_sbd *sdp, u64 blkno,
 	struct super_block *sb = sdp->sd_vfs;
 	struct bio *bio = bio_alloc(GFP_NOIO, BIO_MAX_PAGES);
 
-	bio->bi_iter.bi_sector = blkno << (sb->s_blocksize_bits - 9);
+	bio->bi_iter.bi_sector = blkno << sdp->sd_fsb2bb_shift;
 	bio_set_dev(bio, sb->s_bdev);
 	bio->bi_end_io = end_io;
 	bio->bi_private = sdp;
@@ -504,7 +504,7 @@ int gfs2_find_jhead(struct gfs2_jdesc *jd, struct gfs2_log_header_host *head,
 	unsigned int bsize = sdp->sd_sb.sb_bsize, off;
 	unsigned int bsize_shift = sdp->sd_sb.sb_bsize_shift;
 	unsigned int shift = PAGE_SHIFT - bsize_shift;
-	unsigned int readahead_blocks = BIO_MAX_PAGES << shift;
+	unsigned int max_bio_size = 2 * 1024 * 1024;
 	struct gfs2_journal_extent *je;
 	int sz, ret = 0;
 	struct bio *bio = NULL;
@@ -532,12 +532,17 @@ int gfs2_find_jhead(struct gfs2_jdesc *jd, struct gfs2_log_header_host *head,
 				off = 0;
 			}
 
-			if (!bio || (bio_chained && !off)) {
+			if (!bio || (bio_chained && !off) ||
+			    bio->bi_iter.bi_size >= max_bio_size) {
 				/* start new bio */
 			} else {
-				sz = bio_add_page(bio, page, bsize, off);
-				if (sz == bsize)
-					goto block_added;
+				sector_t sector = dblock << sdp->sd_fsb2bb_shift;
+
+				if (bio_end_sector(bio) == sector) {
+					sz = bio_add_page(bio, page, bsize, off);
+					if (sz == bsize)
+						goto block_added;
+				}
 				if (off) {
 					unsigned int blocks =
 						(PAGE_SIZE - off) >> bsize_shift;
@@ -563,7 +568,7 @@ int gfs2_find_jhead(struct gfs2_jdesc *jd, struct gfs2_log_header_host *head,
 			off += bsize;
 			if (off == PAGE_SIZE)
 				page = NULL;
-			if (blocks_submitted < blocks_read + readahead_blocks) {
+			if (blocks_submitted < 2 * max_bio_size >> bsize_shift) {
 				/* Keep at least one bio in flight */
 				continue;
 			}
-- 
2.20.1

[PATCH 5.4 072/147] fork: prevent accidental access to clone3 features

[Greg Kroah-Hartman]

From: Christian Brauner <christian.brauner@ubuntu.com>

[ Upstream commit 3f2c788a13143620c5471ac96ac4f033fc9ac3f3 ]

Jan reported an issue where an interaction between sign-extending clone's
flag argument on ppc64le and the new CLONE_INTO_CGROUP feature causes
clone() to consistently fail with EBADF.

The whole story is a little longer. The legacy clone() syscall is odd in a
bunch of ways and here two things interact. First, legacy clone's flag
argument is word-size dependent, i.e. it's an unsigned long whereas most
system calls with flag arguments use int or unsigned int. Second, legacy
clone() ignores unknown and deprecated flags. The two of them taken
together means that users on 64bit systems can pass garbage for the upper
32bit of the clone() syscall since forever and things would just work fine.
Just try this on a 64bit kernel prior to v5.7-rc1 where this will succeed
and on v5.7-rc1 where this will fail with EBADF:

int main(int argc, char *argv[])
{
        pid_t pid;

        /* Note that legacy clone() has different argument ordering on
         * different architectures so this won't work everywhere.
         *
         * Only set the upper 32 bits.
         */
        pid = syscall(__NR_clone, 0xffffffff00000000 | SIGCHLD,
                      NULL, NULL, NULL, NULL);
        if (pid < 0)
                exit(EXIT_FAILURE);
        if (pid == 0)
                exit(EXIT_SUCCESS);
        if (wait(NULL) != pid)
                exit(EXIT_FAILURE);

        exit(EXIT_SUCCESS);
}

Since legacy clone() couldn't be extended this was not a problem so far and
nobody really noticed or cared since nothing in the kernel ever bothered to
look at the upper 32 bits.

But once we introduced clone3() and expanded the flag argument in struct
clone_args to 64 bit we opened this can of worms. With the first flag-based
extension to clone3() making use of the upper 32 bits of the flag argument
we've effectively made it possible for the legacy clone() syscall to reach
clone3() only flags. The sign extension scenario is just the odd
corner-case that we needed to figure this out.

The reason we just realized this now and not already when we introduced
CLONE_CLEAR_SIGHAND was that CLONE_INTO_CGROUP assumes that a valid cgroup
file descriptor has been given. So the sign extension (or the user
accidently passing garbage for the upper 32 bits) caused the
CLONE_INTO_CGROUP bit to be raised and the kernel to error out when it
didn't find a valid cgroup file descriptor.

Let's fix this by always capping the upper 32 bits for all codepaths that
are not aware of clone3() features. This ensures that we can't reach
clone3() only features by accident via legacy clone as with the sign
extension case and also that legacy clone() works exactly like before, i.e.
ignoring any unknown flags.  This solution risks no regressions and is also
pretty clean.

Fixes: 7f192e3cd316 ("fork: add clone3")
Fixes: ef2c41cf38a7 ("clone3: allow spawning processes into cgroups")
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dmitry V. Levin <ldv@altlinux.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Florian Weimer <fw@deneb.enyo.de>
Cc: libc-alpha@sourceware.org
Cc: stable@vger.kernel.org # 5.3+
Link: https://sourceware.org/pipermail/libc-alpha/2020-May/113596.html
Link: https://lore.kernel.org/r/20200507103214.77218-1-christian.brauner@ubuntu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/fork.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/kernel/fork.c b/kernel/fork.c
index 27c0ef30002e2..9180f4416dbab 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -2412,11 +2412,11 @@ long do_fork(unsigned long clone_flags,
 	      int __user *child_tidptr)
 {
 	struct kernel_clone_args args = {
-		.flags		= (clone_flags & ~CSIGNAL),
+		.flags		= (lower_32_bits(clone_flags) & ~CSIGNAL),
 		.pidfd		= parent_tidptr,
 		.child_tid	= child_tidptr,
 		.parent_tid	= parent_tidptr,
-		.exit_signal	= (clone_flags & CSIGNAL),
+		.exit_signal	= (lower_32_bits(clone_flags) & CSIGNAL),
 		.stack		= stack_start,
 		.stack_size	= stack_size,
 	};
@@ -2434,8 +2434,9 @@ long do_fork(unsigned long clone_flags,
 pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 {
 	struct kernel_clone_args args = {
-		.flags		= ((flags | CLONE_VM | CLONE_UNTRACED) & ~CSIGNAL),
-		.exit_signal	= (flags & CSIGNAL),
+		.flags		= ((lower_32_bits(flags) | CLONE_VM |
+				    CLONE_UNTRACED) & ~CSIGNAL),
+		.exit_signal	= (lower_32_bits(flags) & CSIGNAL),
 		.stack		= (unsigned long)fn,
 		.stack_size	= (unsigned long)arg,
 	};
@@ -2496,11 +2497,11 @@ SYSCALL_DEFINE5(clone, unsigned long, clone_flags, unsigned long, newsp,
 #endif
 {
 	struct kernel_clone_args args = {
-		.flags		= (clone_flags & ~CSIGNAL),
+		.flags		= (lower_32_bits(clone_flags) & ~CSIGNAL),
 		.pidfd		= parent_tidptr,
 		.child_tid	= child_tidptr,
 		.parent_tid	= parent_tidptr,
-		.exit_signal	= (clone_flags & CSIGNAL),
+		.exit_signal	= (lower_32_bits(clone_flags) & CSIGNAL),
 		.stack		= newsp,
 		.tls		= tls,
 	};
-- 
2.20.1

[PATCH 5.4 073/147] drm/amdgpu: force fbdev into vram

[Greg Kroah-Hartman]

From: Alex Deucher <alexander.deucher@amd.com>

[ Upstream commit a6aacb2b26e85aa619cf0c6f98d0ca77314cd2a1 ]

We set the fb smem pointer to the offset into the BAR, so keep
the fbdev bo in vram.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=207581
Fixes: 6c8d74caa2fa33 ("drm/amdgpu: Enable scatter gather display support")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c
index 143753d237e7c..eaa5e7b7c19d6 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c
@@ -133,8 +133,7 @@ static int amdgpufb_create_pinned_object(struct amdgpu_fbdev *rfbdev,
 	u32 cpp;
 	u64 flags = AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED |
 			       AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS     |
-			       AMDGPU_GEM_CREATE_VRAM_CLEARED 	     |
-			       AMDGPU_GEM_CREATE_CPU_GTT_USWC;
+			       AMDGPU_GEM_CREATE_VRAM_CLEARED;
 
 	info = drm_get_format_info(adev->ddev, mode_cmd);
 	cpp = info->cpp[0];
-- 
2.20.1

[PATCH 5.4 074/147] NFS: Fix fscache super_cookie index_key from changing after umount

[Greg Kroah-Hartman]

From: Dave Wysochanski <dwysocha@redhat.com>

[ Upstream commit d9bfced1fbcb35b28d8fbed4e785d2807055ed2b ]

Commit 402cb8dda949 ("fscache: Attach the index key and aux data to
the cookie") added the index_key and index_key_len parameters to
fscache_acquire_cookie(), and updated the callers in the NFS client.
One of the callers was inside nfs_fscache_get_super_cookie()
and was changed to use the full struct nfs_fscache_key as the
index_key.  However, a couple members of this structure contain
pointers and thus will change each time the same NFS share is
remounted.  Since index_key is used for fscache_cookie->key_hash
and this subsequently is used to compare cookies, the effectiveness
of fscache with NFS is reduced to the point at which a umount
occurs.   Any subsequent remount of the same share will cause a
unique NFS super_block index_key and key_hash to be generated for
the same data, rendering any prior fscache data unable to be
found.  A simple reproducer demonstrates the problem.

1. Mount share with 'fsc', create a file, drop page cache
systemctl start cachefilesd
mount -o vers=3,fsc 127.0.0.1:/export /mnt
dd if=/dev/zero of=/mnt/file1.bin bs=4096 count=1
echo 3 > /proc/sys/vm/drop_caches

2. Read file into page cache and fscache, then unmount
dd if=/mnt/file1.bin of=/dev/null bs=4096 count=1
umount /mnt

3. Remount and re-read which should come from fscache
mount -o vers=3,fsc 127.0.0.1:/export /mnt
echo 3 > /proc/sys/vm/drop_caches
dd if=/mnt/file1.bin of=/dev/null bs=4096 count=1

4. Check for READ ops in mountstats - there should be none
grep READ: /proc/self/mountstats

Looking at the history and the removed function, nfs_super_get_key(),
we should only use nfs_fscache_key.key plus any uniquifier, for
the fscache index_key.

Fixes: 402cb8dda949 ("fscache: Attach the index key and aux data to the cookie")
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/fscache.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/fscache.c b/fs/nfs/fscache.c
index a6dcc2151e779..3184063322d48 100644
--- a/fs/nfs/fscache.c
+++ b/fs/nfs/fscache.c
@@ -188,7 +188,8 @@ void nfs_fscache_get_super_cookie(struct super_block *sb, const char *uniq, int
 	/* create a cache index for looking up filehandles */
 	nfss->fscache = fscache_acquire_cookie(nfss->nfs_client->fscache,
 					       &nfs_fscache_super_index_def,
-					       key, sizeof(*key) + ulen,
+					       &key->key,
+					       sizeof(key->key) + ulen,
 					       NULL, 0,
 					       nfss, 0, true);
 	dfprintk(FSCACHE, "NFS: get superblock cookie (0x%p/0x%p)\n",
-- 
2.20.1

[PATCH 5.4 075/147] nfs: fscache: use timespec64 in inode auxdata

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 6e31ded6895adfca97211118cc9b72236e8f6d53 ]

nfs currently behaves differently on 32-bit and 64-bit kernels regarding
the on-disk format of nfs_fscache_inode_auxdata.

That format should really be the same on any kernel, and we should avoid
the 'timespec' type in order to remove that from the kernel later on.

Using plain 'timespec64' would not be good here, since that includes
implied padding and would possibly leak kernel stack data to the on-disk
format on 32-bit architectures.

struct __kernel_timespec would work as a replacement, but open-coding
the two struct members in nfs_fscache_inode_auxdata makes it more
obvious what's going on here, and keeps the current format for 64-bit
architectures.

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/fscache-index.c |  6 ++++--
 fs/nfs/fscache.c       | 18 ++++++++++++------
 fs/nfs/fscache.h       |  8 +++++---
 3 files changed, 21 insertions(+), 11 deletions(-)

diff --git a/fs/nfs/fscache-index.c b/fs/nfs/fscache-index.c
index 15f271401dcca..573b1da9342c1 100644
--- a/fs/nfs/fscache-index.c
+++ b/fs/nfs/fscache-index.c
@@ -84,8 +84,10 @@ enum fscache_checkaux nfs_fscache_inode_check_aux(void *cookie_netfs_data,
 		return FSCACHE_CHECKAUX_OBSOLETE;
 
 	memset(&auxdata, 0, sizeof(auxdata));
-	auxdata.mtime = timespec64_to_timespec(nfsi->vfs_inode.i_mtime);
-	auxdata.ctime = timespec64_to_timespec(nfsi->vfs_inode.i_ctime);
+	auxdata.mtime_sec  = nfsi->vfs_inode.i_mtime.tv_sec;
+	auxdata.mtime_nsec = nfsi->vfs_inode.i_mtime.tv_nsec;
+	auxdata.ctime_sec  = nfsi->vfs_inode.i_ctime.tv_sec;
+	auxdata.ctime_nsec = nfsi->vfs_inode.i_ctime.tv_nsec;
 
 	if (NFS_SERVER(&nfsi->vfs_inode)->nfs_client->rpc_ops->version == 4)
 		auxdata.change_attr = inode_peek_iversion_raw(&nfsi->vfs_inode);
diff --git a/fs/nfs/fscache.c b/fs/nfs/fscache.c
index 3184063322d48..d0c629f97789e 100644
--- a/fs/nfs/fscache.c
+++ b/fs/nfs/fscache.c
@@ -241,8 +241,10 @@ void nfs_fscache_init_inode(struct inode *inode)
 		return;
 
 	memset(&auxdata, 0, sizeof(auxdata));
-	auxdata.mtime = timespec64_to_timespec(nfsi->vfs_inode.i_mtime);
-	auxdata.ctime = timespec64_to_timespec(nfsi->vfs_inode.i_ctime);
+	auxdata.mtime_sec  = nfsi->vfs_inode.i_mtime.tv_sec;
+	auxdata.mtime_nsec = nfsi->vfs_inode.i_mtime.tv_nsec;
+	auxdata.ctime_sec  = nfsi->vfs_inode.i_ctime.tv_sec;
+	auxdata.ctime_nsec = nfsi->vfs_inode.i_ctime.tv_nsec;
 
 	if (NFS_SERVER(&nfsi->vfs_inode)->nfs_client->rpc_ops->version == 4)
 		auxdata.change_attr = inode_peek_iversion_raw(&nfsi->vfs_inode);
@@ -266,8 +268,10 @@ void nfs_fscache_clear_inode(struct inode *inode)
 	dfprintk(FSCACHE, "NFS: clear cookie (0x%p/0x%p)\n", nfsi, cookie);
 
 	memset(&auxdata, 0, sizeof(auxdata));
-	auxdata.mtime = timespec64_to_timespec(nfsi->vfs_inode.i_mtime);
-	auxdata.ctime = timespec64_to_timespec(nfsi->vfs_inode.i_ctime);
+	auxdata.mtime_sec  = nfsi->vfs_inode.i_mtime.tv_sec;
+	auxdata.mtime_nsec = nfsi->vfs_inode.i_mtime.tv_nsec;
+	auxdata.ctime_sec  = nfsi->vfs_inode.i_ctime.tv_sec;
+	auxdata.ctime_nsec = nfsi->vfs_inode.i_ctime.tv_nsec;
 	fscache_relinquish_cookie(cookie, &auxdata, false);
 	nfsi->fscache = NULL;
 }
@@ -308,8 +312,10 @@ void nfs_fscache_open_file(struct inode *inode, struct file *filp)
 		return;
 
 	memset(&auxdata, 0, sizeof(auxdata));
-	auxdata.mtime = timespec64_to_timespec(nfsi->vfs_inode.i_mtime);
-	auxdata.ctime = timespec64_to_timespec(nfsi->vfs_inode.i_ctime);
+	auxdata.mtime_sec  = nfsi->vfs_inode.i_mtime.tv_sec;
+	auxdata.mtime_nsec = nfsi->vfs_inode.i_mtime.tv_nsec;
+	auxdata.ctime_sec  = nfsi->vfs_inode.i_ctime.tv_sec;
+	auxdata.ctime_nsec = nfsi->vfs_inode.i_ctime.tv_nsec;
 
 	if (inode_is_open_for_write(inode)) {
 		dfprintk(FSCACHE, "NFS: nfsi 0x%p disabling cache\n", nfsi);
diff --git a/fs/nfs/fscache.h b/fs/nfs/fscache.h
index ad041cfbf9ec0..6754c8607230b 100644
--- a/fs/nfs/fscache.h
+++ b/fs/nfs/fscache.h
@@ -62,9 +62,11 @@ struct nfs_fscache_key {
  * cache object.
  */
 struct nfs_fscache_inode_auxdata {
-	struct timespec	mtime;
-	struct timespec	ctime;
-	u64		change_attr;
+	s64	mtime_sec;
+	s64	mtime_nsec;
+	s64	ctime_sec;
+	s64	ctime_nsec;
+	u64	change_attr;
 };
 
 /*
-- 
2.20.1

[PATCH 5.4 076/147] NFSv4: Fix fscache cookie aux_data to ensure change_attr is included

[Greg Kroah-Hartman]

From: Dave Wysochanski <dwysocha@redhat.com>

[ Upstream commit 50eaa652b54df1e2b48dc398d9e6114c9ed080eb ]

Commit 402cb8dda949 ("fscache: Attach the index key and aux data to
the cookie") added the aux_data and aux_data_len to parameters to
fscache_acquire_cookie(), and updated the callers in the NFS client.
In the process it modified the aux_data to include the change_attr,
but missed adding change_attr to a couple places where aux_data was
used.  Specifically, when opening a file and the change_attr is not
added, the following attempt to lookup an object will fail inside
cachefiles_check_object_xattr() = -116 due to
nfs_fscache_inode_check_aux() failing memcmp on auxdata and returning
FSCACHE_CHECKAUX_OBSOLETE.

Fix this by adding nfs_fscache_update_auxdata() to set the auxdata
from all relevant fields in the inode, including the change_attr.

Fixes: 402cb8dda949 ("fscache: Attach the index key and aux data to the cookie")
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/fscache.c | 34 ++++++++++++++++------------------
 1 file changed, 16 insertions(+), 18 deletions(-)

diff --git a/fs/nfs/fscache.c b/fs/nfs/fscache.c
index d0c629f97789e..7d6721ec31d4d 100644
--- a/fs/nfs/fscache.c
+++ b/fs/nfs/fscache.c
@@ -227,6 +227,19 @@ void nfs_fscache_release_super_cookie(struct super_block *sb)
 	}
 }
 
+static void nfs_fscache_update_auxdata(struct nfs_fscache_inode_auxdata *auxdata,
+				  struct nfs_inode *nfsi)
+{
+	memset(auxdata, 0, sizeof(*auxdata));
+	auxdata->mtime_sec  = nfsi->vfs_inode.i_mtime.tv_sec;
+	auxdata->mtime_nsec = nfsi->vfs_inode.i_mtime.tv_nsec;
+	auxdata->ctime_sec  = nfsi->vfs_inode.i_ctime.tv_sec;
+	auxdata->ctime_nsec = nfsi->vfs_inode.i_ctime.tv_nsec;
+
+	if (NFS_SERVER(&nfsi->vfs_inode)->nfs_client->rpc_ops->version == 4)
+		auxdata->change_attr = inode_peek_iversion_raw(&nfsi->vfs_inode);
+}
+
 /*
  * Initialise the per-inode cache cookie pointer for an NFS inode.
  */
@@ -240,14 +253,7 @@ void nfs_fscache_init_inode(struct inode *inode)
 	if (!(nfss->fscache && S_ISREG(inode->i_mode)))
 		return;
 
-	memset(&auxdata, 0, sizeof(auxdata));
-	auxdata.mtime_sec  = nfsi->vfs_inode.i_mtime.tv_sec;
-	auxdata.mtime_nsec = nfsi->vfs_inode.i_mtime.tv_nsec;
-	auxdata.ctime_sec  = nfsi->vfs_inode.i_ctime.tv_sec;
-	auxdata.ctime_nsec = nfsi->vfs_inode.i_ctime.tv_nsec;
-
-	if (NFS_SERVER(&nfsi->vfs_inode)->nfs_client->rpc_ops->version == 4)
-		auxdata.change_attr = inode_peek_iversion_raw(&nfsi->vfs_inode);
+	nfs_fscache_update_auxdata(&auxdata, nfsi);
 
 	nfsi->fscache = fscache_acquire_cookie(NFS_SB(inode->i_sb)->fscache,
 					       &nfs_fscache_inode_object_def,
@@ -267,11 +273,7 @@ void nfs_fscache_clear_inode(struct inode *inode)
 
 	dfprintk(FSCACHE, "NFS: clear cookie (0x%p/0x%p)\n", nfsi, cookie);
 
-	memset(&auxdata, 0, sizeof(auxdata));
-	auxdata.mtime_sec  = nfsi->vfs_inode.i_mtime.tv_sec;
-	auxdata.mtime_nsec = nfsi->vfs_inode.i_mtime.tv_nsec;
-	auxdata.ctime_sec  = nfsi->vfs_inode.i_ctime.tv_sec;
-	auxdata.ctime_nsec = nfsi->vfs_inode.i_ctime.tv_nsec;
+	nfs_fscache_update_auxdata(&auxdata, nfsi);
 	fscache_relinquish_cookie(cookie, &auxdata, false);
 	nfsi->fscache = NULL;
 }
@@ -311,11 +313,7 @@ void nfs_fscache_open_file(struct inode *inode, struct file *filp)
 	if (!fscache_cookie_valid(cookie))
 		return;
 
-	memset(&auxdata, 0, sizeof(auxdata));
-	auxdata.mtime_sec  = nfsi->vfs_inode.i_mtime.tv_sec;
-	auxdata.mtime_nsec = nfsi->vfs_inode.i_mtime.tv_nsec;
-	auxdata.ctime_sec  = nfsi->vfs_inode.i_ctime.tv_sec;
-	auxdata.ctime_nsec = nfsi->vfs_inode.i_ctime.tv_nsec;
+	nfs_fscache_update_auxdata(&auxdata, nfsi);
 
 	if (inode_is_open_for_write(inode)) {
 		dfprintk(FSCACHE, "NFS: nfsi 0x%p disabling cache\n", nfsi);
-- 
2.20.1

[PATCH 5.4 077/147] netfilter: conntrack: avoid gcc-10 zero-length-bounds warning

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 2c407aca64977ede9b9f35158e919773cae2082f ]

gcc-10 warns around a suspicious access to an empty struct member:

net/netfilter/nf_conntrack_core.c: In function '__nf_conntrack_alloc':
net/netfilter/nf_conntrack_core.c:1522:9: warning: array subscript 0 is outside the bounds of an interior zero-length array 'u8[0]' {aka 'unsigned char[0]'} [-Wzero-length-bounds]
 1522 |  memset(&ct->__nfct_init_offset[0], 0,
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from net/netfilter/nf_conntrack_core.c:37:
include/net/netfilter/nf_conntrack.h:90:5: note: while referencing '__nfct_init_offset'
   90 |  u8 __nfct_init_offset[0];
      |     ^~~~~~~~~~~~~~~~~~

The code is correct but a bit unusual. Rework it slightly in a way that
does not trigger the warning, using an empty struct instead of an empty
array. There are probably more elegant ways to do this, but this is the
smallest change.

Fixes: c41884ce0562 ("netfilter: conntrack: avoid zeroing timer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/netfilter/nf_conntrack.h | 2 +-
 net/netfilter/nf_conntrack_core.c    | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h
index 9f551f3b69c65..90690e37a56f0 100644
--- a/include/net/netfilter/nf_conntrack.h
+++ b/include/net/netfilter/nf_conntrack.h
@@ -87,7 +87,7 @@ struct nf_conn {
 	struct hlist_node	nat_bysource;
 #endif
 	/* all members below initialized via memset */
-	u8 __nfct_init_offset[0];
+	struct { } __nfct_init_offset;
 
 	/* If we were expected by an expectation, this will be it */
 	struct nf_conn *master;
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 5cd610b547e0d..c2ad462f33f1b 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -1381,9 +1381,9 @@ __nf_conntrack_alloc(struct net *net,
 	ct->status = 0;
 	ct->timeout = 0;
 	write_pnet(&ct->ct_net, net);
-	memset(&ct->__nfct_init_offset[0], 0,
+	memset(&ct->__nfct_init_offset, 0,
 	       offsetof(struct nf_conn, proto) -
-	       offsetof(struct nf_conn, __nfct_init_offset[0]));
+	       offsetof(struct nf_conn, __nfct_init_offset));
 
 	nf_ct_zone_add(ct, zone);
 
-- 
2.20.1

[PATCH 5.4 078/147] drm/i915/gvt: Fix kernel oops for 3-level ppgtt guest

[Greg Kroah-Hartman]

From: Zhenyu Wang <zhenyuw@linux.intel.com>

[ Upstream commit 72a7a9925e2beea09b109dffb3384c9bf920d9da ]

As i915 won't allocate extra PDP for current default PML4 table,
so for 3-level ppgtt guest, we would hit kernel pointer access
failure on extra PDP pointers. So this trys to bypass that now.
It won't impact real shadow PPGTT setup, so guest context still
works.

This is verified on 4.15 guest kernel with i915.enable_ppgtt=1
to force on old aliasing ppgtt behavior.

Fixes: 4f15665ccbba ("drm/i915: Add ppgtt to GVT GEM context")
Reviewed-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200506095918.124913-1-zhenyuw@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/i915/gvt/scheduler.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/gvt/scheduler.c b/drivers/gpu/drm/i915/gvt/scheduler.c
index 6c79d16b381ea..058dcd5416440 100644
--- a/drivers/gpu/drm/i915/gvt/scheduler.c
+++ b/drivers/gpu/drm/i915/gvt/scheduler.c
@@ -374,7 +374,11 @@ static void set_context_ppgtt_from_shadow(struct intel_vgpu_workload *workload,
 		for (i = 0; i < GVT_RING_CTX_NR_PDPS; i++) {
 			struct i915_page_directory * const pd =
 				i915_pd_entry(ppgtt->pd, i);
-
+			/* skip now as current i915 ppgtt alloc won't allocate
+			   top level pdp for non 4-level table, won't impact
+			   shadow ppgtt. */
+			if (!pd)
+				break;
 			px_dma(pd) = mm->ppgtt_mm.shadow_pdps[i];
 		}
 	}
-- 
2.20.1

[PATCH 5.4 079/147] arm64: fix the flush_icache_range arguments in machine_kexec

[Greg Kroah-Hartman]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit d51c214541c5154dda3037289ee895ea3ded5ebd ]

The second argument is the end "pointer", not the length.

Fixes: d28f6df1305a ("arm64/kexec: Add core kexec support")
Cc: <stable@vger.kernel.org> # 4.8.x-
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/machine_kexec.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/kernel/machine_kexec.c b/arch/arm64/kernel/machine_kexec.c
index 0df8493624e00..cc049ff5c6a53 100644
--- a/arch/arm64/kernel/machine_kexec.c
+++ b/arch/arm64/kernel/machine_kexec.c
@@ -189,6 +189,7 @@ void machine_kexec(struct kimage *kimage)
 	 * the offline CPUs. Therefore, we must use the __* variant here.
 	 */
 	__flush_icache_range((uintptr_t)reboot_code_buffer,
+			     (uintptr_t)reboot_code_buffer +
 			     arm64_relocate_new_kernel_size);
 
 	/* Flush the kimage list and its buffers. */
-- 
2.20.1

[PATCH 5.4 080/147] nfs: fix NULL deference in nfs4_get_valid_delegation

[Greg Kroah-Hartman]

From: J. Bruce Fields <bfields@redhat.com>

[ Upstream commit 29fe839976266bc7c55b927360a1daae57477723 ]

We add the new state to the nfsi->open_states list, making it
potentially visible to other threads, before we've finished initializing
it.

That wasn't a problem when all the readers were also taking the i_lock
(as we do here), but since we switched to RCU, there's now a possibility
that a reader could see the partially initialized state.

Symptoms observed were a crash when another thread called
nfs4_get_valid_delegation() on a NULL inode, resulting in an oops like:

	BUG: unable to handle page fault for address: ffffffffffffffb0 ...
	RIP: 0010:nfs4_get_valid_delegation+0x6/0x30 [nfsv4] ...
	Call Trace:
	 nfs4_open_prepare+0x80/0x1c0 [nfsv4]
	 __rpc_execute+0x75/0x390 [sunrpc]
	 ? finish_task_switch+0x75/0x260
	 rpc_async_schedule+0x29/0x40 [sunrpc]
	 process_one_work+0x1ad/0x370
	 worker_thread+0x30/0x390
	 ? create_worker+0x1a0/0x1a0
	 kthread+0x10c/0x130
	 ? kthread_park+0x80/0x80
	 ret_from_fork+0x22/0x30

Fixes: 9ae075fdd190 "NFSv4: Convert open state lookup to use RCU"
Reviewed-by: Seiichi Ikarashi <s.ikarashi@fujitsu.com>
Tested-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4state.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index b53bcf40e2a77..ea680f619438b 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -733,9 +733,9 @@ nfs4_get_open_state(struct inode *inode, struct nfs4_state_owner *owner)
 		state = new;
 		state->owner = owner;
 		atomic_inc(&owner->so_count);
-		list_add_rcu(&state->inode_states, &nfsi->open_states);
 		ihold(inode);
 		state->inode = inode;
+		list_add_rcu(&state->inode_states, &nfsi->open_states);
 		spin_unlock(&inode->i_lock);
 		/* Note: The reclaim code dictates that we add stateless
 		 * and read-only stateids to the end of the list */
-- 
2.20.1

[PATCH 5.4 081/147] SUNRPC: Signalled ASYNC tasks need to exit

[Greg Kroah-Hartman]

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit ce99aa62e1eb793e259d023c7f6ccb7c4879917b ]

Ensure that signalled ASYNC rpc_tasks exit immediately instead of
spinning until a timeout (or forever).

To avoid checking for the signal flag on every scheduler iteration,
the check is instead introduced in the client's finite state
machine.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Fixes: ae67bd3821bb ("SUNRPC: Fix up task signalling")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/clnt.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index f7f78566be463..f1088ca39d44c 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -2422,6 +2422,11 @@ rpc_check_timeout(struct rpc_task *task)
 {
 	struct rpc_clnt	*clnt = task->tk_client;
 
+	if (RPC_SIGNALLED(task)) {
+		rpc_call_rpcerror(task, -ERESTARTSYS);
+		return;
+	}
+
 	if (xprt_adjust_timeout(task->tk_rqstp) == 0)
 		return;
 
-- 
2.20.1

[PATCH 5.4 082/147] netfilter: nft_set_rbtree: Introduce and use nft_rbtree_interval_start()

[Greg Kroah-Hartman]

From: Stefano Brivio <sbrivio@redhat.com>

[ Upstream commit 6f7c9caf017be8ab0fe3b99509580d0793bf0833 ]

Replace negations of nft_rbtree_interval_end() with a new helper,
nft_rbtree_interval_start(), wherever this helps to visualise the
problem at hand, that is, for all the occurrences except for the
comparison against given flags in __nft_rbtree_get().

This gets especially useful in the next patch.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_set_rbtree.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c
index a9f804f7a04ac..95fcba34bfd35 100644
--- a/net/netfilter/nft_set_rbtree.c
+++ b/net/netfilter/nft_set_rbtree.c
@@ -33,6 +33,11 @@ static bool nft_rbtree_interval_end(const struct nft_rbtree_elem *rbe)
 	       (*nft_set_ext_flags(&rbe->ext) & NFT_SET_ELEM_INTERVAL_END);
 }
 
+static bool nft_rbtree_interval_start(const struct nft_rbtree_elem *rbe)
+{
+	return !nft_rbtree_interval_end(rbe);
+}
+
 static bool nft_rbtree_equal(const struct nft_set *set, const void *this,
 			     const struct nft_rbtree_elem *interval)
 {
@@ -64,7 +69,7 @@ static bool __nft_rbtree_lookup(const struct net *net, const struct nft_set *set
 			if (interval &&
 			    nft_rbtree_equal(set, this, interval) &&
 			    nft_rbtree_interval_end(rbe) &&
-			    !nft_rbtree_interval_end(interval))
+			    nft_rbtree_interval_start(interval))
 				continue;
 			interval = rbe;
 		} else if (d > 0)
@@ -89,7 +94,7 @@ static bool __nft_rbtree_lookup(const struct net *net, const struct nft_set *set
 
 	if (set->flags & NFT_SET_INTERVAL && interval != NULL &&
 	    nft_set_elem_active(&interval->ext, genmask) &&
-	    !nft_rbtree_interval_end(interval)) {
+	    nft_rbtree_interval_start(interval)) {
 		*ext = &interval->ext;
 		return true;
 	}
@@ -224,9 +229,9 @@ static int __nft_rbtree_insert(const struct net *net, const struct nft_set *set,
 			p = &parent->rb_right;
 		else {
 			if (nft_rbtree_interval_end(rbe) &&
-			    !nft_rbtree_interval_end(new)) {
+			    nft_rbtree_interval_start(new)) {
 				p = &parent->rb_left;
-			} else if (!nft_rbtree_interval_end(rbe) &&
+			} else if (nft_rbtree_interval_start(rbe) &&
 				   nft_rbtree_interval_end(new)) {
 				p = &parent->rb_right;
 			} else if (nft_set_elem_active(&rbe->ext, genmask)) {
@@ -317,10 +322,10 @@ static void *nft_rbtree_deactivate(const struct net *net,
 			parent = parent->rb_right;
 		else {
 			if (nft_rbtree_interval_end(rbe) &&
-			    !nft_rbtree_interval_end(this)) {
+			    nft_rbtree_interval_start(this)) {
 				parent = parent->rb_left;
 				continue;
-			} else if (!nft_rbtree_interval_end(rbe) &&
+			} else if (nft_rbtree_interval_start(rbe) &&
 				   nft_rbtree_interval_end(this)) {
 				parent = parent->rb_right;
 				continue;
-- 
2.20.1

[PATCH 5.4 083/147] netfilter: nft_set_rbtree: Add missing expired checks

[Greg Kroah-Hartman]

From: Phil Sutter <phil@nwl.cc>

[ Upstream commit 340eaff651160234bdbce07ef34b92a8e45cd540 ]

Expired intervals would still match and be dumped to user space until
garbage collection wiped them out. Make sure they stop matching and
disappear (from users' perspective) as soon as they expire.

Fixes: 8d8540c4f5e03 ("netfilter: nft_set_rbtree: add timeout support")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_set_rbtree.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c
index 95fcba34bfd35..ee7c29e0a9d7b 100644
--- a/net/netfilter/nft_set_rbtree.c
+++ b/net/netfilter/nft_set_rbtree.c
@@ -79,6 +79,10 @@ static bool __nft_rbtree_lookup(const struct net *net, const struct nft_set *set
 				parent = rcu_dereference_raw(parent->rb_left);
 				continue;
 			}
+
+			if (nft_set_elem_expired(&rbe->ext))
+				return false;
+
 			if (nft_rbtree_interval_end(rbe)) {
 				if (nft_set_is_anonymous(set))
 					return false;
@@ -94,6 +98,7 @@ static bool __nft_rbtree_lookup(const struct net *net, const struct nft_set *set
 
 	if (set->flags & NFT_SET_INTERVAL && interval != NULL &&
 	    nft_set_elem_active(&interval->ext, genmask) &&
+	    !nft_set_elem_expired(&interval->ext) &&
 	    nft_rbtree_interval_start(interval)) {
 		*ext = &interval->ext;
 		return true;
@@ -154,6 +159,9 @@ static bool __nft_rbtree_get(const struct net *net, const struct nft_set *set,
 				continue;
 			}
 
+			if (nft_set_elem_expired(&rbe->ext))
+				return false;
+
 			if (!nft_set_ext_exists(&rbe->ext, NFT_SET_EXT_FLAGS) ||
 			    (*nft_set_ext_flags(&rbe->ext) & NFT_SET_ELEM_INTERVAL_END) ==
 			    (flags & NFT_SET_ELEM_INTERVAL_END)) {
@@ -170,6 +178,7 @@ static bool __nft_rbtree_get(const struct net *net, const struct nft_set *set,
 
 	if (set->flags & NFT_SET_INTERVAL && interval != NULL &&
 	    nft_set_elem_active(&interval->ext, genmask) &&
+	    !nft_set_elem_expired(&interval->ext) &&
 	    ((!nft_rbtree_interval_end(interval) &&
 	      !(flags & NFT_SET_ELEM_INTERVAL_END)) ||
 	     (nft_rbtree_interval_end(interval) &&
@@ -355,6 +364,8 @@ static void nft_rbtree_walk(const struct nft_ctx *ctx,
 
 		if (iter->count < iter->skip)
 			goto cont;
+		if (nft_set_elem_expired(&rbe->ext))
+			goto cont;
 		if (!nft_set_elem_active(&rbe->ext, iter->genmask))
 			goto cont;
 
-- 
2.20.1

[PATCH 5.4 084/147] RDMA/rxe: Always return ERR_PTR from rxe_create_mmap_info()

[Greg Kroah-Hartman]

From: Sudip Mukherjee <sudipm.mukherjee@gmail.com>

[ Upstream commit bb43c8e382e5da0ee253e3105d4099820ff4d922 ]

The commit below modified rxe_create_mmap_info() to return ERR_PTR's but
didn't update the callers to handle them. Modify rxe_create_mmap_info() to
only return ERR_PTR and fix all error checking after
rxe_create_mmap_info() is called.

Ensure that all other exit paths properly set the error return.

Fixes: ff23dfa13457 ("IB: Pass only ib_udata in function prototypes")
Link: https://lore.kernel.org/r/20200425233545.17210-1-sudipm.mukherjee@gmail.com
Link: https://lore.kernel.org/r/20200511183742.GB225608@mwanda
Cc: stable@vger.kernel.org [5.4+]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/rxe/rxe_mmap.c  |  2 +-
 drivers/infiniband/sw/rxe/rxe_queue.c | 11 +++++++----
 2 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/infiniband/sw/rxe/rxe_mmap.c b/drivers/infiniband/sw/rxe/rxe_mmap.c
index 48f48122ddcb8..6a413d73b95dd 100644
--- a/drivers/infiniband/sw/rxe/rxe_mmap.c
+++ b/drivers/infiniband/sw/rxe/rxe_mmap.c
@@ -151,7 +151,7 @@ struct rxe_mmap_info *rxe_create_mmap_info(struct rxe_dev *rxe, u32 size,
 
 	ip = kmalloc(sizeof(*ip), GFP_KERNEL);
 	if (!ip)
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 
 	size = PAGE_ALIGN(size);
 
diff --git a/drivers/infiniband/sw/rxe/rxe_queue.c b/drivers/infiniband/sw/rxe/rxe_queue.c
index ff92704de32ff..245040c3a35d0 100644
--- a/drivers/infiniband/sw/rxe/rxe_queue.c
+++ b/drivers/infiniband/sw/rxe/rxe_queue.c
@@ -45,12 +45,15 @@ int do_mmap_info(struct rxe_dev *rxe, struct mminfo __user *outbuf,
 
 	if (outbuf) {
 		ip = rxe_create_mmap_info(rxe, buf_size, udata, buf);
-		if (!ip)
+		if (IS_ERR(ip)) {
+			err = PTR_ERR(ip);
 			goto err1;
+		}
 
-		err = copy_to_user(outbuf, &ip->info, sizeof(ip->info));
-		if (err)
+		if (copy_to_user(outbuf, &ip->info, sizeof(ip->info))) {
+			err = -EFAULT;
 			goto err2;
+		}
 
 		spin_lock_bh(&rxe->pending_lock);
 		list_add(&ip->pending_mmaps, &rxe->pending_mmaps);
@@ -64,7 +67,7 @@ int do_mmap_info(struct rxe_dev *rxe, struct mminfo __user *outbuf,
 err2:
 	kfree(ip);
 err1:
-	return -EINVAL;
+	return err;
 }
 
 inline void rxe_queue_reset(struct rxe_queue *q)
-- 
2.20.1

[PATCH 5.4 085/147] IB/mlx4: Test return value of calls to ib_get_cached_pkey

[Greg Kroah-Hartman]

From: Jack Morgenstein <jackm@dev.mellanox.co.il>

[ Upstream commit 6693ca95bd4330a0ad7326967e1f9bcedd6b0800 ]

In the mlx4_ib_post_send() flow, some functions call ib_get_cached_pkey()
without checking its return value. If ib_get_cached_pkey() returns an
error code, these functions should return failure.

Fixes: 1ffeb2eb8be9 ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support")
Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters")
Fixes: e622f2f4ad21 ("IB: split struct ib_send_wr")
Link: https://lore.kernel.org/r/20200426075921.130074-1-leon@kernel.org
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx4/qp.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index bd4aa04416c6b..6e2b3e2f83f16 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -2891,6 +2891,7 @@ static int build_sriov_qp0_header(struct mlx4_ib_sqp *sqp,
 	int send_size;
 	int header_size;
 	int spc;
+	int err;
 	int i;
 
 	if (wr->wr.opcode != IB_WR_SEND)
@@ -2925,7 +2926,9 @@ static int build_sriov_qp0_header(struct mlx4_ib_sqp *sqp,
 
 	sqp->ud_header.lrh.virtual_lane    = 0;
 	sqp->ud_header.bth.solicited_event = !!(wr->wr.send_flags & IB_SEND_SOLICITED);
-	ib_get_cached_pkey(ib_dev, sqp->qp.port, 0, &pkey);
+	err = ib_get_cached_pkey(ib_dev, sqp->qp.port, 0, &pkey);
+	if (err)
+		return err;
 	sqp->ud_header.bth.pkey = cpu_to_be16(pkey);
 	if (sqp->qp.mlx4_ib_qp_type == MLX4_IB_QPT_TUN_SMI_OWNER)
 		sqp->ud_header.bth.destination_qpn = cpu_to_be32(wr->remote_qpn);
@@ -3212,9 +3215,14 @@ static int build_mlx_header(struct mlx4_ib_sqp *sqp, const struct ib_ud_wr *wr,
 	}
 	sqp->ud_header.bth.solicited_event = !!(wr->wr.send_flags & IB_SEND_SOLICITED);
 	if (!sqp->qp.ibqp.qp_num)
-		ib_get_cached_pkey(ib_dev, sqp->qp.port, sqp->pkey_index, &pkey);
+		err = ib_get_cached_pkey(ib_dev, sqp->qp.port, sqp->pkey_index,
+					 &pkey);
 	else
-		ib_get_cached_pkey(ib_dev, sqp->qp.port, wr->pkey_index, &pkey);
+		err = ib_get_cached_pkey(ib_dev, sqp->qp.port, wr->pkey_index,
+					 &pkey);
+	if (err)
+		return err;
+
 	sqp->ud_header.bth.pkey = cpu_to_be16(pkey);
 	sqp->ud_header.bth.destination_qpn = cpu_to_be32(wr->remote_qpn);
 	sqp->ud_header.bth.psn = cpu_to_be32((sqp->send_psn++) & ((1 << 24) - 1));
-- 
2.20.1

[PATCH 5.4 086/147] IB/core: Fix potential NULL pointer dereference in pkey cache

[Greg Kroah-Hartman]

From: Jack Morgenstein <jackm@dev.mellanox.co.il>

[ Upstream commit 1901b91f99821955eac2bd48fe25ee983385dc00 ]

The IB core pkey cache is populated by procedure ib_cache_update().
Initially, the pkey cache pointer is NULL. ib_cache_update allocates a
buffer and populates it with the device's pkeys, via repeated calls to
procedure ib_query_pkey().

If there is a failure in populating the pkey buffer via ib_query_pkey(),
ib_cache_update does not replace the old pkey buffer cache with the
updated one -- it leaves the old cache as is.

Since initially the pkey buffer cache is NULL, when calling
ib_cache_update the first time, a failure in ib_query_pkey() will cause
the pkey buffer cache pointer to remain NULL.

In this situation, any calls subsequent to ib_get_cached_pkey(),
ib_find_cached_pkey(), or ib_find_cached_pkey_exact() will try to
dereference the NULL pkey cache pointer, causing a kernel panic.

Fix this by checking the ib_cache_update() return value.

Fixes: 8faea9fd4a39 ("RDMA/cache: Move the cache per-port data into the main ib_port_data")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/20200507071012.100594-1-leon@kernel.org
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/cache.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/core/cache.c b/drivers/infiniband/core/cache.c
index 65b10efca2b8c..7affe6b4ae210 100644
--- a/drivers/infiniband/core/cache.c
+++ b/drivers/infiniband/core/cache.c
@@ -1542,8 +1542,11 @@ int ib_cache_setup_one(struct ib_device *device)
 	if (err)
 		return err;
 
-	rdma_for_each_port (device, p)
-		ib_cache_update(device, p, true);
+	rdma_for_each_port (device, p) {
+		err = ib_cache_update(device, p, true);
+		if (err)
+			return err;
+	}
 
 	return 0;
 }
-- 
2.20.1

[PATCH 5.4 087/147] RDMA/core: Fix double put of resource

[Greg Kroah-Hartman]

[ Upstream commit 50bbe3d34fea74b7c0fabe553c40c2f4a48bb9c3 ]

Do not decrease the reference count of resource tracker object twice in
the error flow of res_get_common_doit.

Fixes: c5dfe0ea6ffa ("RDMA/nldev: Add resource tracker doit callback")
Link: https://lore.kernel.org/r/20200507062942.98305-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/nldev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/core/nldev.c b/drivers/infiniband/core/nldev.c
index ef4b0c7061e4c..244ebf285fc3f 100644
--- a/drivers/infiniband/core/nldev.c
+++ b/drivers/infiniband/core/nldev.c
@@ -1248,10 +1248,10 @@ static int res_get_common_doit(struct sk_buff *skb, struct nlmsghdr *nlh,
 
 	has_cap_net_admin = netlink_capable(skb, CAP_NET_ADMIN);
 	ret = fe->fill_res_func(msg, has_cap_net_admin, res, port);
-	rdma_restrack_put(res);
 	if (ret)
 		goto err_free;
 
+	rdma_restrack_put(res);
 	nlmsg_end(msg, nlh);
 	ib_device_put(device);
 	return rdma_nl_unicast(sock_net(skb->sk), msg, NETLINK_CB(skb).portid);
-- 
2.20.1

[PATCH 5.4 088/147] RDMA/iw_cxgb4: Fix incorrect function parameters

[Greg Kroah-Hartman]

From: Potnuri Bharat Teja <bharat@chelsio.com>

[ Upstream commit c8b1f340e54158662acfa41d6dee274846370282 ]

While reading the TCB field in t4_tcb_get_field32() the wrong mask is
passed as a parameter which leads the driver eventually to a kernel
panic/app segfault from access to an illegal SRQ index while flushing the
SRQ completions during connection teardown.

Fixes: 11a27e2121a5 ("iw_cxgb4: complete the cached SRQ buffers")
Link: https://lore.kernel.org/r/20200511185608.5202-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/cxgb4/cm.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index d82e0589cfd26..6b4e7235d2f56 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -2891,8 +2891,7 @@ static int peer_abort(struct c4iw_dev *dev, struct sk_buff *skb)
 			srqidx = ABORT_RSS_SRQIDX_G(
 					be32_to_cpu(req->srqidx_status));
 			if (srqidx) {
-				complete_cached_srq_buffers(ep,
-							    req->srqidx_status);
+				complete_cached_srq_buffers(ep, srqidx);
 			} else {
 				/* Hold ep ref until finish_peer_abort() */
 				c4iw_get_ep(&ep->com);
@@ -3878,8 +3877,8 @@ static int read_tcb_rpl(struct c4iw_dev *dev, struct sk_buff *skb)
 		return 0;
 	}
 
-	ep->srqe_idx = t4_tcb_get_field32(tcb, TCB_RQ_START_W, TCB_RQ_START_W,
-			TCB_RQ_START_S);
+	ep->srqe_idx = t4_tcb_get_field32(tcb, TCB_RQ_START_W, TCB_RQ_START_M,
+					  TCB_RQ_START_S);
 cleanup:
 	pr_debug("ep %p tid %u %016x\n", ep, ep->hwtid, ep->srqe_idx);
 
-- 
2.20.1

[PATCH 5.4 089/147] hwmon: (da9052) Synchronize access with mfd

[Greg Kroah-Hartman]

From: Samu Nuutamo <samu.nuutamo@vincit.fi>

[ Upstream commit 333e22db228f0bd0c839553015a6a8d3db4ba569 ]

When tsi-as-adc is configured it is possible for in7[0123]_input read to
return an incorrect value if a concurrent read to in[456]_input is
performed. This is caused by a concurrent manipulation of the mux
channel without proper locking as hwmon and mfd use different locks for
synchronization.

Switch hwmon to use the same lock as mfd when accessing the TSI channel.

Fixes: 4f16cab19a3d5 ("hwmon: da9052: Add support for TSI channel")
Signed-off-by: Samu Nuutamo <samu.nuutamo@vincit.fi>
[rebase to current master, reword commit message slightly]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/da9052-hwmon.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/da9052-hwmon.c b/drivers/hwmon/da9052-hwmon.c
index 53b517dbe7e6e..4af2fc309c286 100644
--- a/drivers/hwmon/da9052-hwmon.c
+++ b/drivers/hwmon/da9052-hwmon.c
@@ -244,9 +244,9 @@ static ssize_t da9052_tsi_show(struct device *dev,
 	int channel = to_sensor_dev_attr(devattr)->index;
 	int ret;
 
-	mutex_lock(&hwmon->hwmon_lock);
+	mutex_lock(&hwmon->da9052->auxadc_lock);
 	ret = __da9052_read_tsi(dev, channel);
-	mutex_unlock(&hwmon->hwmon_lock);
+	mutex_unlock(&hwmon->da9052->auxadc_lock);
 
 	if (ret < 0)
 		return ret;
-- 
2.20.1

[PATCH 5.4 090/147] s390/ism: fix error return code in ism_probe()

[Greg Kroah-Hartman]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit 29b74cb75e3572d83708745e81e24d37837415f9 ]

Fix to return negative error code -ENOMEM from the smcd_alloc_dev()
error handling case instead of 0, as done elsewhere in this function.

Fixes: 684b89bc39ce ("s390/ism: add device driver for internal shared memory")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/ism_drv.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/s390/net/ism_drv.c b/drivers/s390/net/ism_drv.c
index 4fc2056bd2272..e615dc240150b 100644
--- a/drivers/s390/net/ism_drv.c
+++ b/drivers/s390/net/ism_drv.c
@@ -521,8 +521,10 @@ static int ism_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	ism->smcd = smcd_alloc_dev(&pdev->dev, dev_name(&pdev->dev), &ism_ops,
 				   ISM_NR_DMBS);
-	if (!ism->smcd)
+	if (!ism->smcd) {
+		ret = -ENOMEM;
 		goto err_resource;
+	}
 
 	ism->smcd->priv = ism;
 	ret = ism_dev_init(ism);
-- 
2.20.1

[PATCH 5.4 091/147] mm, memcg: fix inconsistent oom event behavior

[Greg Kroah-Hartman]

From: Yafang Shao <laoar.shao@gmail.com>

[ Upstream commit 04fd61a4e01028210a91f0efc408c8bc61a3018c ]

A recent commit 9852ae3fe529 ("mm, memcg: consider subtrees in
memory.events") changed the behavior of memcg events, which will now
consider subtrees in memory.events.

But oom_kill event is a special one as it is used in both cgroup1 and
cgroup2.  In cgroup1, it is displayed in memory.oom_control.  The file
memory.oom_control is in both root memcg and non root memcg, that is
different with memory.event as it only in non-root memcg.  That commit
is okay for cgroup2, but it is not okay for cgroup1 as it will cause
inconsistent behavior between root memcg and non-root memcg.

Here's an example on why this behavior is inconsistent in cgroup1.

       root memcg
       /
    memcg foo
     /
  memcg bar

Suppose there's an oom_kill in memcg bar, then the oon_kill will be

       root memcg : memory.oom_control(oom_kill)  0
       /
    memcg foo : memory.oom_control(oom_kill)  1
     /
  memcg bar : memory.oom_control(oom_kill)  1

For the non-root memcg, its memory.oom_control(oom_kill) includes its
descendants' oom_kill, but for root memcg, it doesn't include its
descendants' oom_kill.  That means, memory.oom_control(oom_kill) has
different meanings in different memcgs.  That is inconsistent.  Then the
user has to know whether the memcg is root or not.

If we can't fully support it in cgroup1, for example by adding
memory.events.local into cgroup1 as well, then let's don't touch its
original behavior.

Fixes: 9852ae3fe529 ("mm, memcg: consider subtrees in memory.events")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200502141055.7378-1-laoar.shao@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/memcontrol.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index 8faca7b525438..fb5b2a41bd456 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -793,6 +793,8 @@ static inline void memcg_memory_event(struct mem_cgroup *memcg,
 		atomic_long_inc(&memcg->memory_events[event]);
 		cgroup_file_notify(&memcg->events_file);
 
+		if (!cgroup_subsys_on_dfl(memory_cgrp_subsys))
+			break;
 		if (cgrp_dfl_root.flags & CGRP_ROOT_MEMORY_LOCAL_EVENTS)
 			break;
 	} while ((memcg = parent_mem_cgroup(memcg)) &&
-- 
2.20.1

[PATCH 5.4 092/147] NFSv3: fix rpc receive buffer size for MOUNT call

[Greg Kroah-Hartman]

From: Olga Kornievskaia <olga.kornievskaia@gmail.com>

[ Upstream commit 8eed292bc8cbf737e46fb1c119d4c8f6dcb00650 ]

Prior to commit e3d3ab64dd66 ("SUNRPC: Use au_rslack when
computing reply buffer size"), there was enough slack in the reply
buffer to commodate filehandles of size 60bytes. However, the real
problem was that the reply buffer size for the MOUNT operation was
not correctly calculated. Received buffer size used the filehandle
size for NFSv2 (32bytes) which is much smaller than the allowed
filehandle size for the v3 mounts.

Fix the reply buffer size (decode arguments size) for the MNT command.

Fixes: 2c94b8eca1a2 ("SUNRPC: Use au_rslack when computing reply buffer size")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/mount_clnt.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/mount_clnt.c b/fs/nfs/mount_clnt.c
index cb7c10e9721eb..a2593b787cc73 100644
--- a/fs/nfs/mount_clnt.c
+++ b/fs/nfs/mount_clnt.c
@@ -32,6 +32,7 @@
 #define MNT_fhs_status_sz	(1)
 #define MNT_fhandle_sz		XDR_QUADLEN(NFS2_FHSIZE)
 #define MNT_fhandle3_sz		(1 + XDR_QUADLEN(NFS3_FHSIZE))
+#define MNT_fhandlev3_sz	XDR_QUADLEN(NFS3_FHSIZE)
 #define MNT_authflav3_sz	(1 + NFS_MAX_SECFLAVORS)
 
 /*
@@ -39,7 +40,7 @@
  */
 #define MNT_enc_dirpath_sz	encode_dirpath_sz
 #define MNT_dec_mountres_sz	(MNT_status_sz + MNT_fhandle_sz)
-#define MNT_dec_mountres3_sz	(MNT_status_sz + MNT_fhandle_sz + \
+#define MNT_dec_mountres3_sz	(MNT_status_sz + MNT_fhandlev3_sz + \
 				 MNT_authflav3_sz)
 
 /*
-- 
2.20.1

[PATCH 5.4 093/147] pnp: Use list_for_each_entry() instead of open coding

[Greg Kroah-Hartman]

From: Jason Gunthorpe <jgg@mellanox.com>

commit 01b2bafe57b19d9119413f138765ef57990921ce upstream.

Aside from good practice, this avoids a warning from gcc 10:

./include/linux/kernel.h:997:3: warning: array subscript -31 is outside array bounds of ‘struct list_head[1]’ [-Warray-bounds]
  997 |  ((type *)(__mptr - offsetof(type, member))); })
      |  ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/list.h:493:2: note: in expansion of macro ‘container_of’
  493 |  container_of(ptr, type, member)
      |  ^~~~~~~~~~~~
./include/linux/pnp.h:275:30: note: in expansion of macro ‘list_entry’
  275 | #define global_to_pnp_dev(n) list_entry(n, struct pnp_dev, global_list)
      |                              ^~~~~~~~~~
./include/linux/pnp.h:281:11: note: in expansion of macro ‘global_to_pnp_dev’
  281 |  (dev) != global_to_pnp_dev(&pnp_global); \
      |           ^~~~~~~~~~~~~~~~~
arch/x86/kernel/rtc.c:189:2: note: in expansion of macro ‘pnp_for_each_dev’
  189 |  pnp_for_each_dev(dev) {

Because the common code doesn't cast the starting list_head to the
containing struct.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
[ rjw: Whitespace adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/pnp.h |   29 +++++++++--------------------
 1 file changed, 9 insertions(+), 20 deletions(-)

--- a/include/linux/pnp.h
+++ b/include/linux/pnp.h
@@ -220,10 +220,8 @@ struct pnp_card {
 #define global_to_pnp_card(n) list_entry(n, struct pnp_card, global_list)
 #define protocol_to_pnp_card(n) list_entry(n, struct pnp_card, protocol_list)
 #define to_pnp_card(n) container_of(n, struct pnp_card, dev)
-#define pnp_for_each_card(card) \
-	for((card) = global_to_pnp_card(pnp_cards.next); \
-	(card) != global_to_pnp_card(&pnp_cards); \
-	(card) = global_to_pnp_card((card)->global_list.next))
+#define pnp_for_each_card(card)	\
+	list_for_each_entry(card, &pnp_cards, global_list)
 
 struct pnp_card_link {
 	struct pnp_card *card;
@@ -276,14 +274,9 @@ struct pnp_dev {
 #define card_to_pnp_dev(n) list_entry(n, struct pnp_dev, card_list)
 #define protocol_to_pnp_dev(n) list_entry(n, struct pnp_dev, protocol_list)
 #define	to_pnp_dev(n) container_of(n, struct pnp_dev, dev)
-#define pnp_for_each_dev(dev) \
-	for((dev) = global_to_pnp_dev(pnp_global.next); \
-	(dev) != global_to_pnp_dev(&pnp_global); \
-	(dev) = global_to_pnp_dev((dev)->global_list.next))
-#define card_for_each_dev(card,dev) \
-	for((dev) = card_to_pnp_dev((card)->devices.next); \
-	(dev) != card_to_pnp_dev(&(card)->devices); \
-	(dev) = card_to_pnp_dev((dev)->card_list.next))
+#define pnp_for_each_dev(dev) list_for_each_entry(dev, &pnp_global, global_list)
+#define card_for_each_dev(card, dev)	\
+	list_for_each_entry(dev, &(card)->devices, card_list)
 #define pnp_dev_name(dev) (dev)->name
 
 static inline void *pnp_get_drvdata(struct pnp_dev *pdev)
@@ -437,14 +430,10 @@ struct pnp_protocol {
 };
 
 #define to_pnp_protocol(n) list_entry(n, struct pnp_protocol, protocol_list)
-#define protocol_for_each_card(protocol,card) \
-	for((card) = protocol_to_pnp_card((protocol)->cards.next); \
-	(card) != protocol_to_pnp_card(&(protocol)->cards); \
-	(card) = protocol_to_pnp_card((card)->protocol_list.next))
-#define protocol_for_each_dev(protocol,dev) \
-	for((dev) = protocol_to_pnp_dev((protocol)->devices.next); \
-	(dev) != protocol_to_pnp_dev(&(protocol)->devices); \
-	(dev) = protocol_to_pnp_dev((dev)->protocol_list.next))
+#define protocol_for_each_card(protocol, card)	\
+	list_for_each_entry(card, &(protocol)->cards, protocol_list)
+#define protocol_for_each_dev(protocol, dev)	\
+	list_for_each_entry(dev, &(protocol)->devices, protocol_list)
 
 extern struct bus_type pnp_bus_type;
 

[PATCH 5.4 094/147] net/rds: Use ERR_PTR for rds_message_alloc_sgs()

[Greg Kroah-Hartman]

From: Jason Gunthorpe <jgg@mellanox.com>

commit 7dba92037baf3fa00b4880a31fd532542264994c upstream.

Returning the error code via a 'int *ret' when the function returns a
pointer is very un-kernely and causes gcc 10's static analysis to choke:

net/rds/message.c: In function ‘rds_message_map_pages’:
net/rds/message.c:358:10: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  358 |   return ERR_PTR(ret);

Use a typical ERR_PTR return instead.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/rds/message.c |   19 ++++++-------------
 net/rds/rdma.c    |   12 ++++++++----
 net/rds/rds.h     |    3 +--
 net/rds/send.c    |    6 ++++--
 4 files changed, 19 insertions(+), 21 deletions(-)

--- a/net/rds/message.c
+++ b/net/rds/message.c
@@ -308,26 +308,20 @@ out:
 /*
  * RDS ops use this to grab SG entries from the rm's sg pool.
  */
-struct scatterlist *rds_message_alloc_sgs(struct rds_message *rm, int nents,
-					  int *ret)
+struct scatterlist *rds_message_alloc_sgs(struct rds_message *rm, int nents)
 {
 	struct scatterlist *sg_first = (struct scatterlist *) &rm[1];
 	struct scatterlist *sg_ret;
 
-	if (WARN_ON(!ret))
-		return NULL;
-
 	if (nents <= 0) {
 		pr_warn("rds: alloc sgs failed! nents <= 0\n");
-		*ret = -EINVAL;
-		return NULL;
+		return ERR_PTR(-EINVAL);
 	}
 
 	if (rm->m_used_sgs + nents > rm->m_total_sgs) {
 		pr_warn("rds: alloc sgs failed! total %d used %d nents %d\n",
 			rm->m_total_sgs, rm->m_used_sgs, nents);
-		*ret = -ENOMEM;
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 	}
 
 	sg_ret = &sg_first[rm->m_used_sgs];
@@ -343,7 +337,6 @@ struct rds_message *rds_message_map_page
 	unsigned int i;
 	int num_sgs = DIV_ROUND_UP(total_len, PAGE_SIZE);
 	int extra_bytes = num_sgs * sizeof(struct scatterlist);
-	int ret;
 
 	rm = rds_message_alloc(extra_bytes, GFP_NOWAIT);
 	if (!rm)
@@ -352,10 +345,10 @@ struct rds_message *rds_message_map_page
 	set_bit(RDS_MSG_PAGEVEC, &rm->m_flags);
 	rm->m_inc.i_hdr.h_len = cpu_to_be32(total_len);
 	rm->data.op_nents = DIV_ROUND_UP(total_len, PAGE_SIZE);
-	rm->data.op_sg = rds_message_alloc_sgs(rm, num_sgs, &ret);
-	if (!rm->data.op_sg) {
+	rm->data.op_sg = rds_message_alloc_sgs(rm, num_sgs);
+	if (IS_ERR(rm->data.op_sg)) {
 		rds_message_put(rm);
-		return ERR_PTR(ret);
+		return ERR_CAST(rm->data.op_sg);
 	}
 
 	for (i = 0; i < rm->data.op_nents; ++i) {
--- a/net/rds/rdma.c
+++ b/net/rds/rdma.c
@@ -624,9 +624,11 @@ int rds_cmsg_rdma_args(struct rds_sock *
 	op->op_active = 1;
 	op->op_recverr = rs->rs_recverr;
 	WARN_ON(!nr_pages);
-	op->op_sg = rds_message_alloc_sgs(rm, nr_pages, &ret);
-	if (!op->op_sg)
+	op->op_sg = rds_message_alloc_sgs(rm, nr_pages);
+	if (IS_ERR(op->op_sg)) {
+		ret = PTR_ERR(op->op_sg);
 		goto out_pages;
+	}
 
 	if (op->op_notify || op->op_recverr) {
 		/* We allocate an uninitialized notifier here, because
@@ -828,9 +830,11 @@ int rds_cmsg_atomic(struct rds_sock *rs,
 	rm->atomic.op_silent = !!(args->flags & RDS_RDMA_SILENT);
 	rm->atomic.op_active = 1;
 	rm->atomic.op_recverr = rs->rs_recverr;
-	rm->atomic.op_sg = rds_message_alloc_sgs(rm, 1, &ret);
-	if (!rm->atomic.op_sg)
+	rm->atomic.op_sg = rds_message_alloc_sgs(rm, 1);
+	if (IS_ERR(rm->atomic.op_sg)) {
+		ret = PTR_ERR(rm->atomic.op_sg);
 		goto err;
+	}
 
 	/* verify 8 byte-aligned */
 	if (args->local_addr & 0x7) {
--- a/net/rds/rds.h
+++ b/net/rds/rds.h
@@ -849,8 +849,7 @@ rds_conn_connecting(struct rds_connectio
 
 /* message.c */
 struct rds_message *rds_message_alloc(unsigned int nents, gfp_t gfp);
-struct scatterlist *rds_message_alloc_sgs(struct rds_message *rm, int nents,
-					  int *ret);
+struct scatterlist *rds_message_alloc_sgs(struct rds_message *rm, int nents);
 int rds_message_copy_from_user(struct rds_message *rm, struct iov_iter *from,
 			       bool zcopy);
 struct rds_message *rds_message_map_pages(unsigned long *page_addrs, unsigned int total_len);
--- a/net/rds/send.c
+++ b/net/rds/send.c
@@ -1274,9 +1274,11 @@ int rds_sendmsg(struct socket *sock, str
 
 	/* Attach data to the rm */
 	if (payload_len) {
-		rm->data.op_sg = rds_message_alloc_sgs(rm, num_sgs, &ret);
-		if (!rm->data.op_sg)
+		rm->data.op_sg = rds_message_alloc_sgs(rm, num_sgs);
+		if (IS_ERR(rm->data.op_sg)) {
+			ret = PTR_ERR(rm->data.op_sg);
 			goto out;
+		}
 		ret = rds_message_copy_from_user(rm, &msg->msg_iter, zcopy);
 		if (ret)
 			goto out;

[PATCH 5.4 095/147] Stop the ad-hoc games with -Wno-maybe-initialized

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 78a5255ffb6a1af189a83e493d916ba1c54d8c75 upstream.

We have some rather random rules about when we accept the
"maybe-initialized" warnings, and when we don't.

For example, we consider it unreliable for gcc versions < 4.9, but also
if -O3 is enabled, or if optimizing for size.  And then various kernel
config options disabled it, because they know that they trigger that
warning by confusing gcc sufficiently (ie PROFILE_ALL_BRANCHES).

And now gcc-10 seems to be introducing a lot of those warnings too, so
it falls under the same heading as 4.9 did.

At the same time, we have a very straightforward way to _enable_ that
warning when wanted: use "W=2" to enable more warnings.

So stop playing these ad-hoc games, and just disable that warning by
default, with the known and straight-forward "if you want to work on the
extra compiler warnings, use W=123".

Would it be great to have code that is always so obvious that it never
confuses the compiler whether a variable is used initialized or not?
Yes, it would.  In a perfect world, the compilers would be smarter, and
our source code would be simpler.

That's currently not the world we live in, though.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Makefile             |    7 +++----
 init/Kconfig         |   18 ------------------
 kernel/trace/Kconfig |    1 -
 3 files changed, 3 insertions(+), 23 deletions(-)

--- a/Makefile
+++ b/Makefile
@@ -707,10 +707,6 @@ else ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
 KBUILD_CFLAGS += -Os
 endif
 
-ifdef CONFIG_CC_DISABLE_WARN_MAYBE_UNINITIALIZED
-KBUILD_CFLAGS   += -Wno-maybe-uninitialized
-endif
-
 # Tell gcc to never replace conditional load with a non-conditional one
 KBUILD_CFLAGS	+= $(call cc-option,--param=allow-store-data-races=0)
 
@@ -860,6 +856,9 @@ KBUILD_CFLAGS += -Wno-pointer-sign
 # disable stringop warnings in gcc 8+
 KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation)
 
+# Enabled with W=2, disabled by default as noisy
+KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized)
+
 # disable invalid "can't wrap" optimizations for signed / pointers
 KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
 
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -36,22 +36,6 @@ config TOOLS_SUPPORT_RELR
 config CC_HAS_ASM_INLINE
 	def_bool $(success,echo 'void foo(void) { asm inline (""); }' | $(CC) -x c - -c -o /dev/null)
 
-config CC_HAS_WARN_MAYBE_UNINITIALIZED
-	def_bool $(cc-option,-Wmaybe-uninitialized)
-	help
-	  GCC >= 4.7 supports this option.
-
-config CC_DISABLE_WARN_MAYBE_UNINITIALIZED
-	bool
-	depends on CC_HAS_WARN_MAYBE_UNINITIALIZED
-	default CC_IS_GCC && GCC_VERSION < 40900  # unreliable for GCC < 4.9
-	help
-	  GCC's -Wmaybe-uninitialized is not reliable by definition.
-	  Lots of false positive warnings are produced in some cases.
-
-	  If this option is enabled, -Wno-maybe-uninitialzed is passed
-	  to the compiler to suppress maybe-uninitialized warnings.
-
 config CONSTRUCTORS
 	bool
 	depends on !UML
@@ -1226,14 +1210,12 @@ config CC_OPTIMIZE_FOR_PERFORMANCE
 config CC_OPTIMIZE_FOR_PERFORMANCE_O3
 	bool "Optimize more for performance (-O3)"
 	depends on ARC
-	imply CC_DISABLE_WARN_MAYBE_UNINITIALIZED  # avoid false positives
 	help
 	  Choosing this option will pass "-O3" to your compiler to optimize
 	  the kernel yet more for performance.
 
 config CC_OPTIMIZE_FOR_SIZE
 	bool "Optimize for size (-Os)"
-	imply CC_DISABLE_WARN_MAYBE_UNINITIALIZED  # avoid false positives
 	help
 	  Choosing this option will pass "-Os" to your compiler resulting
 	  in a smaller kernel.
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -371,7 +371,6 @@ config PROFILE_ANNOTATED_BRANCHES
 config PROFILE_ALL_BRANCHES
 	bool "Profile all if conditionals" if !FORTIFY_SOURCE
 	select TRACE_BRANCH_PROFILING
-	imply CC_DISABLE_WARN_MAYBE_UNINITIALIZED  # avoid false positives
 	help
 	  This tracer profiles all branch conditions. Every if ()
 	  taken in the kernel is recorded whether it hit or miss.

[PATCH 5.4 096/147] gcc-10: disable zero-length-bounds warning for now

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 5c45de21a2223fe46cf9488c99a7fbcf01527670 upstream.

This is a fine warning, but we still have a number of zero-length arrays
in the kernel that come from the traditional gcc extension.  Yes, they
are getting converted to flexible arrays, but in the meantime the gcc-10
warning about zero-length bounds is very verbose, and is hiding other
issues.

I missed one actual build failure because it was hidden among hundreds
of lines of warning.  Thankfully I caught it on the second go before
pushing things out, but it convinced me that I really need to disable
the new warnings for now.

We'll hopefully be all done with our conversion to flexible arrays in
the not too distant future, and we can then re-enable this warning.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Makefile |    3 +++
 1 file changed, 3 insertions(+)

--- a/Makefile
+++ b/Makefile
@@ -856,6 +856,9 @@ KBUILD_CFLAGS += -Wno-pointer-sign
 # disable stringop warnings in gcc 8+
 KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation)
 
+# We'll want to enable this eventually, but it's not going away for 5.7 at least
+KBUILD_CFLAGS += $(call cc-disable-warning, zero-length-bounds)
+
 # Enabled with W=2, disabled by default as noisy
 KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized)
 

[PATCH 5.4 097/147] gcc-10: disable array-bounds warning for now

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 44720996e2d79e47d508b0abe99b931a726a3197 upstream.

This is another fine warning, related to the 'zero-length-bounds' one,
but hitting the same historical code in the kernel.

Because C didn't historically support flexible array members, we have
code that instead uses a one-sized array, the same way we have cases of
zero-sized arrays.

The one-sized arrays come from either not wanting to use the gcc
zero-sized array extension, or from a slight convenience-feature, where
particularly for strings, the size of the structure now includes the
allocation for the final NUL character.

So with a "char name[1];" at the end of a structure, you can do things
like

       v = my_malloc(sizeof(struct vendor) + strlen(name));

and avoid the "+1" for the terminator.

Yes, the modern way to do that is with a flexible array, and using
'offsetof()' instead of 'sizeof()', and adding the "+1" by hand.  That
also technically gets the size "more correct" in that it avoids any
alignment (and thus padding) issues, but this is another long-term
cleanup thing that will not happen for 5.7.

So disable the warning for now, even though it's potentially quite
useful.  Having a slew of warnings that then hide more urgent new issues
is not an improvement.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Makefile |    1 +
 1 file changed, 1 insertion(+)

--- a/Makefile
+++ b/Makefile
@@ -858,6 +858,7 @@ KBUILD_CFLAGS += $(call cc-disable-warni
 
 # We'll want to enable this eventually, but it's not going away for 5.7 at least
 KBUILD_CFLAGS += $(call cc-disable-warning, zero-length-bounds)
+KBUILD_CFLAGS += $(call cc-disable-warning, array-bounds)
 
 # Enabled with W=2, disabled by default as noisy
 KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized)

[PATCH 5.4 098/147] gcc-10: disable stringop-overflow warning for now

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 5a76021c2eff7fcf2f0918a08fd8a37ce7922921 upstream.

This is the final array bounds warning removal for gcc-10 for now.

Again, the warning is good, and we should re-enable all these warnings
when we have converted all the legacy array declaration cases to
flexible arrays. But in the meantime, it's just noise.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Makefile |    1 +
 1 file changed, 1 insertion(+)

--- a/Makefile
+++ b/Makefile
@@ -859,6 +859,7 @@ KBUILD_CFLAGS += $(call cc-disable-warni
 # We'll want to enable this eventually, but it's not going away for 5.7 at least
 KBUILD_CFLAGS += $(call cc-disable-warning, zero-length-bounds)
 KBUILD_CFLAGS += $(call cc-disable-warning, array-bounds)
+KBUILD_CFLAGS += $(call cc-disable-warning, stringop-overflow)
 
 # Enabled with W=2, disabled by default as noisy
 KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized)

[PATCH 5.4 099/147] gcc-10: disable restrict warning for now

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit adc71920969870dfa54e8f40dac8616284832d02 upstream.

gcc-10 now warns about passing aliasing pointers to functions that take
restricted pointers.

That's actually a great warning, and if we ever start using 'restrict'
in the kernel, it might be quite useful.  But right now we don't, and it
turns out that the only thing this warns about is an idiom where we have
declared a few functions to be "printf-like" (which seems to make gcc
pick up the restricted pointer thing), and then we print to the same
buffer that we also use as an input.

And people do that as an odd concatenation pattern, with code like this:

    #define sysfs_show_gen_prop(buffer, fmt, ...) \
        snprintf(buffer, PAGE_SIZE, "%s"fmt, buffer, __VA_ARGS__)

where we have 'buffer' as both the destination of the final result, and
as the initial argument.

Yes, it's a bit questionable.  And outside of the kernel, people do have
standard declarations like

    int snprintf( char *restrict buffer, size_t bufsz,
                  const char *restrict format, ... );

where that output buffer is marked as a restrict pointer that cannot
alias with any other arguments.

But in the context of the kernel, that 'use snprintf() to concatenate to
the end result' does work, and the pattern shows up in multiple places.
And we have not marked our own version of snprintf() as taking restrict
pointers, so the warning is incorrect for now, and gcc picks it up on
its own.

If we do start using 'restrict' in the kernel (and it might be a good
idea if people find places where it matters), we'll need to figure out
how to avoid this issue for snprintf and friends.  But in the meantime,
this warning is not useful.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Makefile |    3 +++
 1 file changed, 3 insertions(+)

--- a/Makefile
+++ b/Makefile
@@ -861,6 +861,9 @@ KBUILD_CFLAGS += $(call cc-disable-warni
 KBUILD_CFLAGS += $(call cc-disable-warning, array-bounds)
 KBUILD_CFLAGS += $(call cc-disable-warning, stringop-overflow)
 
+# Another good warning that we'll want to enable eventually
+KBUILD_CFLAGS += $(call cc-disable-warning, restrict)
+
 # Enabled with W=2, disabled by default as noisy
 KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized)
 

[PATCH 5.4 100/147] gcc-10 warnings: fix low-hanging fruit

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 9d82973e032e246ff5663c9805fbb5407ae932e3 upstream.

Due to a bug-report that was compiler-dependent, I updated one of my
machines to gcc-10.  That shows a lot of new warnings.  Happily they
seem to be mostly the valid kind, but it's going to cause a round of
churn for getting rid of them..

This is the really low-hanging fruit of removing a couple of zero-sized
arrays in some core code.  We have had a round of these patches before,
and we'll have many more coming, and there is nothing special about
these except that they were particularly trivial, and triggered more
warnings than most.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/fs.h  |    2 +-
 include/linux/tty.h |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -978,7 +978,7 @@ struct file_handle {
 	__u32 handle_bytes;
 	int handle_type;
 	/* file identifier */
-	unsigned char f_handle[0];
+	unsigned char f_handle[];
 };
 
 static inline struct file *get_file(struct file *f)
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -66,7 +66,7 @@ struct tty_buffer {
 	int read;
 	int flags;
 	/* Data points here */
-	unsigned long data[0];
+	unsigned long data[];
 };
 
 /* Values for .flags field of tty_buffer */

[PATCH 5.4 101/147] gcc-10: mark more functions __init to avoid section mismatch warnings

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit e99332e7b4cda6e60f5b5916cf9943a79dbef902 upstream.

It seems that for whatever reason, gcc-10 ends up not inlining a couple
of functions that used to be inlined before.  Even if they only have one
single callsite - it looks like gcc may have decided that the code was
unlikely, and not worth inlining.

The code generation difference is harmless, but caused a few new section
mismatch errors, since the (now no longer inlined) function wasn't in
the __init section, but called other init functions:

   Section mismatch in reference from the function kexec_free_initrd() to the function .init.text:free_initrd_mem()
   Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memremap()
   Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memunmap()

So add the appropriate __init annotation to make modpost not complain.
In both cases there were trivially just a single callsite from another
__init function.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/firmware/efi/tpm.c |    2 +-
 init/initramfs.c           |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/firmware/efi/tpm.c
+++ b/drivers/firmware/efi/tpm.c
@@ -16,7 +16,7 @@
 int efi_tpm_final_log_size;
 EXPORT_SYMBOL(efi_tpm_final_log_size);
 
-static int tpm2_calc_event_log_size(void *data, int count, void *size_info)
+static int __init tpm2_calc_event_log_size(void *data, int count, void *size_info)
 {
 	struct tcg_pcr_event2_head *header;
 	int event_size, size = 0;
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -534,7 +534,7 @@ void __weak free_initrd_mem(unsigned lon
 }
 
 #ifdef CONFIG_KEXEC_CORE
-static bool kexec_free_initrd(void)
+static bool __init kexec_free_initrd(void)
 {
 	unsigned long crashk_start = (unsigned long)__va(crashk_res.start);
 	unsigned long crashk_end   = (unsigned long)__va(crashk_res.end);

[PATCH 5.4 102/147] gcc-10: avoid shadowing standard library free() in crypto

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 1a263ae60b04de959d9ce9caea4889385eefcc7b upstream.

gcc-10 has started warning about conflicting types for a few new
built-in functions, particularly 'free()'.

This results in warnings like:

   crypto/xts.c:325:13: warning: conflicting types for built-in function ‘free’; expected ‘void(void *)’ [-Wbuiltin-declaration-mismatch]

because the crypto layer had its local freeing functions called
'free()'.

Gcc-10 is in the wrong here, since that function is marked 'static', and
thus there is no chance of confusion with any standard library function
namespace.

But the simplest thing to do is to just use a different name here, and
avoid this gcc mis-feature.

[ Side note: gcc knowing about 'free()' is in itself not the
  mis-feature: the semantics of 'free()' are special enough that a
  compiler can validly do special things when seeing it.

  So the mis-feature here is that gcc thinks that 'free()' is some
  restricted name, and you can't shadow it as a local static function.

  Making the special 'free()' semantics be a function attribute rather
  than tied to the name would be the much better model ]

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/lrw.c |    4 ++--
 crypto/xts.c |    4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

--- a/crypto/lrw.c
+++ b/crypto/lrw.c
@@ -289,7 +289,7 @@ static void exit_tfm(struct crypto_skcip
 	crypto_free_skcipher(ctx->child);
 }
 
-static void free(struct skcipher_instance *inst)
+static void free_inst(struct skcipher_instance *inst)
 {
 	crypto_drop_skcipher(skcipher_instance_ctx(inst));
 	kfree(inst);
@@ -401,7 +401,7 @@ static int create(struct crypto_template
 	inst->alg.encrypt = encrypt;
 	inst->alg.decrypt = decrypt;
 
-	inst->free = free;
+	inst->free = free_inst;
 
 	err = skcipher_register_instance(tmpl, inst);
 	if (err)
--- a/crypto/xts.c
+++ b/crypto/xts.c
@@ -328,7 +328,7 @@ static void exit_tfm(struct crypto_skcip
 	crypto_free_cipher(ctx->tweak);
 }
 
-static void free(struct skcipher_instance *inst)
+static void free_inst(struct skcipher_instance *inst)
 {
 	crypto_drop_skcipher(skcipher_instance_ctx(inst));
 	kfree(inst);
@@ -439,7 +439,7 @@ static int create(struct crypto_template
 	inst->alg.encrypt = encrypt;
 	inst->alg.decrypt = decrypt;
 
-	inst->free = free;
+	inst->free = free_inst;
 
 	err = skcipher_register_instance(tmpl, inst);
 	if (err)

[PATCH 5.4 103/147] usb: usbfs: correct kernel->user page attribute mismatch

[Greg Kroah-Hartman]

From: Jeremy Linton <jeremy.linton@arm.com>

commit 2bef9aed6f0e22391c8d4570749b1acc9bc3981e upstream.

On some architectures (e.g. arm64) requests for
IO coherent memory may use non-cachable attributes if
the relevant device isn't cache coherent. If these
pages are then remapped into userspace as cacheable,
they may not be coherent with the non-cacheable mappings.

In particular this happens with libusb, when it attempts
to create zero-copy buffers for use by rtl-sdr
(https://github.com/osmocom/rtl-sdr/). On low end arm
devices with non-coherent USB ports, the application will
be unexpectedly killed, while continuing to work fine on
arm machines with coherent USB controllers.

This bug has been discovered/reported a few times over
the last few years. In the case of rtl-sdr a compile time
option to enable/disable zero copy was implemented to
work around it.

Rather than relaying on application specific workarounds,
dma_mmap_coherent() can be used instead of remap_pfn_range().
The page cache/etc attributes will then be correctly set in
userspace to match the kernel mapping.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200504201348.1183246-1-jeremy.linton@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/devio.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -217,6 +217,7 @@ static int usbdev_mmap(struct file *file
 {
 	struct usb_memory *usbm = NULL;
 	struct usb_dev_state *ps = file->private_data;
+	struct usb_hcd *hcd = bus_to_hcd(ps->dev->bus);
 	size_t size = vma->vm_end - vma->vm_start;
 	void *mem;
 	unsigned long flags;
@@ -250,9 +251,7 @@ static int usbdev_mmap(struct file *file
 	usbm->vma_use_count = 1;
 	INIT_LIST_HEAD(&usbm->memlist);
 
-	if (remap_pfn_range(vma, vma->vm_start,
-			virt_to_phys(usbm->mem) >> PAGE_SHIFT,
-			size, vma->vm_page_prot) < 0) {
+	if (dma_mmap_coherent(hcd->self.sysdev, vma, mem, dma_handle, size)) {
 		dec_usb_memory_use_count(usbm, &usbm->vma_use_count);
 		return -EAGAIN;
 	}

[PATCH 5.4 104/147] USB: usbfs: fix mmap dma mismatch

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a0e710a7def471b8eb779ff551fc27701da49599 upstream.

In commit 2bef9aed6f0e ("usb: usbfs: correct kernel->user page attribute
mismatch") we switched from always calling remap_pfn_range() to call
dma_mmap_coherent() to handle issues with systems with non-coherent USB host
controller drivers.  Unfortunatly, as syzbot quickly told us, not all the world
is host controllers with DMA support, so we need to check what host controller
we are attempting to talk to before doing this type of allocation.

Thanks to Christoph for the quick idea of how to fix this.

Fixes: 2bef9aed6f0e ("usb: usbfs: correct kernel->user page attribute mismatch")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot+353be47c9ce21b68b7ed@syzkaller.appspotmail.com
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20200514112711.1858252-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/devio.c |   16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -251,9 +251,19 @@ static int usbdev_mmap(struct file *file
 	usbm->vma_use_count = 1;
 	INIT_LIST_HEAD(&usbm->memlist);
 
-	if (dma_mmap_coherent(hcd->self.sysdev, vma, mem, dma_handle, size)) {
-		dec_usb_memory_use_count(usbm, &usbm->vma_use_count);
-		return -EAGAIN;
+	if (hcd->localmem_pool || !hcd_uses_dma(hcd)) {
+		if (remap_pfn_range(vma, vma->vm_start,
+				    virt_to_phys(usbm->mem) >> PAGE_SHIFT,
+				    size, vma->vm_page_prot) < 0) {
+			dec_usb_memory_use_count(usbm, &usbm->vma_use_count);
+			return -EAGAIN;
+		}
+	} else {
+		if (dma_mmap_coherent(hcd->self.sysdev, vma, mem, dma_handle,
+				      size)) {
+			dec_usb_memory_use_count(usbm, &usbm->vma_use_count);
+			return -EAGAIN;
+		}
 	}
 
 	vma->vm_flags |= VM_IO;

[PATCH 5.4 105/147] ALSA: hda/realtek - Limit int mic boost for Thinkpad T530

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit b590b38ca305d6d7902ec7c4f7e273e0069f3bcc upstream.

Lenovo Thinkpad T530 seems to have a sensitive internal mic capture
that needs to limit the mic boost like a few other Thinkpad models.
Although we may change the quirk for ALC269_FIXUP_LENOVO_DOCK, this
hits way too many other laptop models, so let's add a new fixup model
that limits the internal mic boost on top of the existing quirk and
apply to only T530.

BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1171293
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200514160533.10337-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5856,6 +5856,7 @@ enum {
 	ALC269_FIXUP_HP_LINE1_MIC1_LED,
 	ALC269_FIXUP_INV_DMIC,
 	ALC269_FIXUP_LENOVO_DOCK,
+	ALC269_FIXUP_LENOVO_DOCK_LIMIT_BOOST,
 	ALC269_FIXUP_NO_SHUTUP,
 	ALC286_FIXUP_SONY_MIC_NO_PRESENCE,
 	ALC269_FIXUP_PINCFG_NO_HP_TO_LINEOUT,
@@ -6175,6 +6176,12 @@ static const struct hda_fixup alc269_fix
 		.chained = true,
 		.chain_id = ALC269_FIXUP_PINCFG_NO_HP_TO_LINEOUT
 	},
+	[ALC269_FIXUP_LENOVO_DOCK_LIMIT_BOOST] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc269_fixup_limit_int_mic_boost,
+		.chained = true,
+		.chain_id = ALC269_FIXUP_LENOVO_DOCK,
+	},
 	[ALC269_FIXUP_PINCFG_NO_HP_TO_LINEOUT] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc269_fixup_pincfg_no_hp_to_lineout,
@@ -7317,7 +7324,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x17aa, 0x21b8, "Thinkpad Edge 14", ALC269_FIXUP_SKU_IGNORE),
 	SND_PCI_QUIRK(0x17aa, 0x21ca, "Thinkpad L412", ALC269_FIXUP_SKU_IGNORE),
 	SND_PCI_QUIRK(0x17aa, 0x21e9, "Thinkpad Edge 15", ALC269_FIXUP_SKU_IGNORE),
-	SND_PCI_QUIRK(0x17aa, 0x21f6, "Thinkpad T530", ALC269_FIXUP_LENOVO_DOCK),
+	SND_PCI_QUIRK(0x17aa, 0x21f6, "Thinkpad T530", ALC269_FIXUP_LENOVO_DOCK_LIMIT_BOOST),
 	SND_PCI_QUIRK(0x17aa, 0x21fa, "Thinkpad X230", ALC269_FIXUP_LENOVO_DOCK),
 	SND_PCI_QUIRK(0x17aa, 0x21f3, "Thinkpad T430", ALC269_FIXUP_LENOVO_DOCK),
 	SND_PCI_QUIRK(0x17aa, 0x21fb, "Thinkpad T430s", ALC269_FIXUP_LENOVO_DOCK),
@@ -7456,6 +7463,7 @@ static const struct hda_model_fixup alc2
 	{.id = ALC269_FIXUP_HEADSET_MODE, .name = "headset-mode"},
 	{.id = ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC, .name = "headset-mode-no-hp-mic"},
 	{.id = ALC269_FIXUP_LENOVO_DOCK, .name = "lenovo-dock"},
+	{.id = ALC269_FIXUP_LENOVO_DOCK_LIMIT_BOOST, .name = "lenovo-dock-limit-boost"},
 	{.id = ALC269_FIXUP_HP_GPIO_LED, .name = "hp-gpio-led"},
 	{.id = ALC269_FIXUP_HP_DOCK_GPIO_MIC1_LED, .name = "hp-dock-gpio-mic1-led"},
 	{.id = ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, .name = "dell-headset-multi"},

[PATCH 5.4 106/147] ALSA: hda/realtek - Add COEF workaround for ASUS ZenBook UX431DA

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 1b94e59d30afecf18254ad413e953e7587645a20 upstream.

ASUS ZenBook UX431DA requires an additional COEF setup when booted
from the recent Windows 10, otherwise it produces the noisy output.
The quirk turns on COEF 0x1b bit 10 that has been cleared supposedly
due to the pop noise reduction.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207553
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200512073203.14091-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5978,6 +5978,7 @@ enum {
 	ALC294_FIXUP_ASUS_DUAL_SPK,
 	ALC285_FIXUP_THINKPAD_HEADSET_JACK,
 	ALC294_FIXUP_ASUS_HPE,
+	ALC294_FIXUP_ASUS_COEF_1B,
 	ALC285_FIXUP_HP_GPIO_LED,
 };
 
@@ -7112,6 +7113,17 @@ static const struct hda_fixup alc269_fix
 		.chained = true,
 		.chain_id = ALC294_FIXUP_ASUS_HEADSET_MIC
 	},
+	[ALC294_FIXUP_ASUS_COEF_1B] = {
+		.type = HDA_FIXUP_VERBS,
+		.v.verbs = (const struct hda_verb[]) {
+			/* Set bit 10 to correct noisy output after reboot from
+			 * Windows 10 (due to pop noise reduction?)
+			 */
+			{ 0x20, AC_VERB_SET_COEF_INDEX, 0x1b },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x4e4b },
+			{ }
+		},
+	},
 	[ALC285_FIXUP_HP_GPIO_LED] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc285_fixup_hp_gpio_led,
@@ -7283,6 +7295,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1043, 0x19ce, "ASUS B9450FA", ALC294_FIXUP_ASUS_HPE),
 	SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW),
 	SND_PCI_QUIRK(0x1043, 0x1a30, "ASUS X705UD", ALC256_FIXUP_ASUS_MIC),
+	SND_PCI_QUIRK(0x1043, 0x1b11, "ASUS UX431DA", ALC294_FIXUP_ASUS_COEF_1B),
 	SND_PCI_QUIRK(0x1043, 0x1b13, "Asus U41SV", ALC269_FIXUP_INV_DMIC),
 	SND_PCI_QUIRK(0x1043, 0x1bbd, "ASUS Z550MA", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1043, 0x1c23, "Asus X55U", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),

[PATCH 5.4 107/147] ALSA: rawmidi: Fix racy buffer resize under concurrent accesses

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit c1f6e3c818dd734c30f6a7eeebf232ba2cf3181d upstream.

The rawmidi core allows user to resize the runtime buffer via ioctl,
and this may lead to UAF when performed during concurrent reads or
writes: the read/write functions unlock the runtime lock temporarily
during copying form/to user-space, and that's the race window.

This patch fixes the hole by introducing a reference counter for the
runtime buffer read/write access and returns -EBUSY error when the
resize is performed concurrently against read/write.

Note that the ref count field is a simple integer instead of
refcount_t here, since the all contexts accessing the buffer is
basically protected with a spinlock, hence we need no expensive atomic
ops.  Also, note that this busy check is needed only against read /
write functions, and not in receive/transmit callbacks; the race can
happen only at the spinlock hole mentioned in the above, while the
whole function is protected for receive / transmit callbacks.

Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAFcO6XMWpUVK_yzzCpp8_XP7+=oUpQvuBeCbMffEDkpe8jWrfg@mail.gmail.com
Link: https://lore.kernel.org/r/s5heerw3r5z.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/sound/rawmidi.h |    1 +
 sound/core/rawmidi.c    |   31 +++++++++++++++++++++++++++----
 2 files changed, 28 insertions(+), 4 deletions(-)

--- a/include/sound/rawmidi.h
+++ b/include/sound/rawmidi.h
@@ -61,6 +61,7 @@ struct snd_rawmidi_runtime {
 	size_t avail_min;	/* min avail for wakeup */
 	size_t avail;		/* max used buffer for wakeup */
 	size_t xruns;		/* over/underruns counter */
+	int buffer_ref;		/* buffer reference count */
 	/* misc */
 	spinlock_t lock;
 	wait_queue_head_t sleep;
--- a/sound/core/rawmidi.c
+++ b/sound/core/rawmidi.c
@@ -97,6 +97,17 @@ static void snd_rawmidi_input_event_work
 		runtime->event(runtime->substream);
 }
 
+/* buffer refcount management: call with runtime->lock held */
+static inline void snd_rawmidi_buffer_ref(struct snd_rawmidi_runtime *runtime)
+{
+	runtime->buffer_ref++;
+}
+
+static inline void snd_rawmidi_buffer_unref(struct snd_rawmidi_runtime *runtime)
+{
+	runtime->buffer_ref--;
+}
+
 static int snd_rawmidi_runtime_create(struct snd_rawmidi_substream *substream)
 {
 	struct snd_rawmidi_runtime *runtime;
@@ -646,6 +657,11 @@ static int resize_runtime_buffer(struct
 		if (!newbuf)
 			return -ENOMEM;
 		spin_lock_irq(&runtime->lock);
+		if (runtime->buffer_ref) {
+			spin_unlock_irq(&runtime->lock);
+			kvfree(newbuf);
+			return -EBUSY;
+		}
 		oldbuf = runtime->buffer;
 		runtime->buffer = newbuf;
 		runtime->buffer_size = params->buffer_size;
@@ -945,8 +961,10 @@ static long snd_rawmidi_kernel_read1(str
 	long result = 0, count1;
 	struct snd_rawmidi_runtime *runtime = substream->runtime;
 	unsigned long appl_ptr;
+	int err = 0;
 
 	spin_lock_irqsave(&runtime->lock, flags);
+	snd_rawmidi_buffer_ref(runtime);
 	while (count > 0 && runtime->avail) {
 		count1 = runtime->buffer_size - runtime->appl_ptr;
 		if (count1 > count)
@@ -965,16 +983,19 @@ static long snd_rawmidi_kernel_read1(str
 		if (userbuf) {
 			spin_unlock_irqrestore(&runtime->lock, flags);
 			if (copy_to_user(userbuf + result,
-					 runtime->buffer + appl_ptr, count1)) {
-				return result > 0 ? result : -EFAULT;
-			}
+					 runtime->buffer + appl_ptr, count1))
+				err = -EFAULT;
 			spin_lock_irqsave(&runtime->lock, flags);
+			if (err)
+				goto out;
 		}
 		result += count1;
 		count -= count1;
 	}
+ out:
+	snd_rawmidi_buffer_unref(runtime);
 	spin_unlock_irqrestore(&runtime->lock, flags);
-	return result;
+	return result > 0 ? result : err;
 }
 
 long snd_rawmidi_kernel_read(struct snd_rawmidi_substream *substream,
@@ -1268,6 +1289,7 @@ static long snd_rawmidi_kernel_write1(st
 			return -EAGAIN;
 		}
 	}
+	snd_rawmidi_buffer_ref(runtime);
 	while (count > 0 && runtime->avail > 0) {
 		count1 = runtime->buffer_size - runtime->appl_ptr;
 		if (count1 > count)
@@ -1299,6 +1321,7 @@ static long snd_rawmidi_kernel_write1(st
 	}
       __end:
 	count1 = runtime->avail < runtime->buffer_size;
+	snd_rawmidi_buffer_unref(runtime);
 	spin_unlock_irqrestore(&runtime->lock, flags);
 	if (count1)
 		snd_rawmidi_output_trigger(substream, 1);

[PATCH 5.4 108/147] ALSA: usb-audio: Add control message quirk delay for Kingston HyperX headset

[Greg Kroah-Hartman]

From: Jesus Ramos <jesus-ramos@live.com>

commit 073919e09ca445d4486968e3f851372ff44cf2b5 upstream.

Kingston HyperX headset with 0951:16ad also needs the same quirk for
delaying the frequency controls.

Signed-off-by: Jesus Ramos <jesus-ramos@live.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/BY5PR19MB3634BA68C7CCA23D8DF428E796AF0@BY5PR19MB3634.namprd19.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/usb/quirks.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1592,13 +1592,14 @@ void snd_usb_ctl_msg_quirk(struct usb_de
 	    && (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
 		msleep(20);
 
-	/* Zoom R16/24, Logitech H650e, Jabra 550a needs a tiny delay here,
-	 * otherwise requests like get/set frequency return as failed despite
-	 * actually succeeding.
+	/* Zoom R16/24, Logitech H650e, Jabra 550a, Kingston HyperX needs a tiny
+	 * delay here, otherwise requests like get/set frequency return as
+	 * failed despite actually succeeding.
 	 */
 	if ((chip->usb_id == USB_ID(0x1686, 0x00dd) ||
 	     chip->usb_id == USB_ID(0x046d, 0x0a46) ||
-	     chip->usb_id == USB_ID(0x0b0e, 0x0349)) &&
+	     chip->usb_id == USB_ID(0x0b0e, 0x0349) ||
+	     chip->usb_id == USB_ID(0x0951, 0x16ad)) &&
 	    (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
 		usleep_range(1000, 2000);
 }

[PATCH 5.4 109/147] usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534B

[Greg Kroah-Hartman]

From: Eugeniu Rosca <erosca@de.adit-jv.com>

commit 76e1ef1d81a4129d7e2fb8c48c83b166d1c8e040 upstream.

On Tue, May 12, 2020 at 09:36:07PM +0800, Kai-Heng Feng wrote [1]:
> This patch prevents my Raven Ridge xHCI from getting runtime suspend.

The problem described in v5.6 commit 1208f9e1d758c9 ("USB: hub: Fix the
broken detection of USB3 device in SMSC hub") applies solely to the
USB5534B hub [2] present on the Kingfisher Infotainment Carrier Board,
manufactured by Shimafuji Electric Inc [3].

Despite that, the aforementioned commit applied the quirk to _all_ hubs
carrying vendor ID 0x424 (i.e. SMSC), of which there are more [4] than
initially expected. Consequently, the quirk is now enabled on platforms
carrying SMSC/Microchip hub models which potentially don't exhibit the
original issue.

To avoid reports like [1], further limit the quirk's scope to
USB5534B [2], by employing both Vendor and Product ID checks.

Tested on H3ULCB + Kingfisher rev. M05.

[1] https://lore.kernel.org/linux-renesas-soc/73933975-6F0E-40F5-9584-D2B8F615C0F3@canonical.com/
[2] https://www.microchip.com/wwwproducts/en/USB5534B
[3] http://www.shimafuji.co.jp/wp/wp-content/uploads/2018/08/SBEV-RCAR-KF-M06Board_HWSpecificationEN_Rev130.pdf
[4] https://devicehunt.com/search/type/usb/vendor/0424/device/any

Fixes: 1208f9e1d758c9 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub")
Cc: stable@vger.kernel.org # v4.14+
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Hardik Gajjar <hgajjar@de.adit-jv.com>
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200514220246.13290-1-erosca@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/hub.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -38,6 +38,7 @@
 
 #define USB_VENDOR_GENESYS_LOGIC		0x05e3
 #define USB_VENDOR_SMSC				0x0424
+#define USB_PRODUCT_USB5534B			0x5534
 #define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND	0x01
 #define HUB_QUIRK_DISABLE_AUTOSUSPEND		0x02
 
@@ -5506,8 +5507,11 @@ out_hdev_lock:
 }
 
 static const struct usb_device_id hub_id_table[] = {
-    { .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_CLASS,
+    { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+                   | USB_DEVICE_ID_MATCH_PRODUCT
+                   | USB_DEVICE_ID_MATCH_INT_CLASS,
       .idVendor = USB_VENDOR_SMSC,
+      .idProduct = USB_PRODUCT_USB5534B,
       .bInterfaceClass = USB_CLASS_HUB,
       .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
     { .match_flags = USB_DEVICE_ID_MATCH_VENDOR

[PATCH 5.4 110/147] usb: host: xhci-plat: keep runtime active when removing host

[Greg Kroah-Hartman]

From: Li Jun <jun.li@nxp.com>

commit 1449cb2c2253d37d998c3714aa9b95416d16d379 upstream.

While removing the host (e.g. for USB role switch from host to device),
if runtime pm is enabled by user, below oops occurs on dwc3 and cdns3
platforms.
Keeping the xhci-plat device active during host removal, and disabling
runtime pm before calling pm_runtime_set_suspended() fixes them.

oops1:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000240
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.4.3-00107-g64d454a-dirty
Hardware name: FSL i.MX8MP EVK (DT)
Workqueue: pm pm_runtime_work
pstate: 60000005 (nZCv daif -PAN -UAO)
pc : xhci_suspend+0x34/0x698
lr : xhci_plat_runtime_suspend+0x2c/0x38
sp : ffff800011ddbbc0
Call trace:
 xhci_suspend+0x34/0x698
 xhci_plat_runtime_suspend+0x2c/0x38
 pm_generic_runtime_suspend+0x28/0x40
 __rpm_callback+0xd8/0x138
 rpm_callback+0x24/0x98
 rpm_suspend+0xe0/0x448
 rpm_idle+0x124/0x140
 pm_runtime_work+0xa0/0xf8
 process_one_work+0x1dc/0x370
 worker_thread+0x48/0x468
 kthread+0xf0/0x120
 ret_from_fork+0x10/0x1c

oops2:
usb 2-1: USB disconnect, device number 2
xhci-hcd xhci-hcd.1.auto: remove, state 4
usb usb2: USB disconnect, device number 1
xhci-hcd xhci-hcd.1.auto: USB bus 2 deregistered
xhci-hcd xhci-hcd.1.auto: remove, state 4
usb usb1: USB disconnect, device number 1
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000138
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 PID: 7 Comm: kworker/u8:0 Not tainted 5.6.0-rc4-next-20200304-03578
Hardware name: Freescale i.MX8QXP MEK (DT)
Workqueue: 1-0050 tcpm_state_machine_work
pstate: 20000005 (nzCv daif -PAN -UAO)
pc : xhci_free_dev+0x214/0x270
lr : xhci_plat_runtime_resume+0x78/0x88
sp : ffff80001006b5b0
Call trace:
 xhci_free_dev+0x214/0x270
 xhci_plat_runtime_resume+0x78/0x88
 pm_generic_runtime_resume+0x30/0x48
 __rpm_callback+0x90/0x148
 rpm_callback+0x28/0x88
 rpm_resume+0x568/0x758
 rpm_resume+0x260/0x758
 rpm_resume+0x260/0x758
 __pm_runtime_resume+0x40/0x88
 device_release_driver_internal+0xa0/0x1c8
 device_release_driver+0x1c/0x28
 bus_remove_device+0xd4/0x158
 device_del+0x15c/0x3a0
 usb_disable_device+0xb0/0x268
 usb_disconnect+0xcc/0x300
 usb_remove_hcd+0xf4/0x1dc
 xhci_plat_remove+0x78/0xe0
 platform_drv_remove+0x30/0x50
 device_release_driver_internal+0xfc/0x1c8
 device_release_driver+0x1c/0x28
 bus_remove_device+0xd4/0x158
 device_del+0x15c/0x3a0
 platform_device_del.part.0+0x20/0x90
 platform_device_unregister+0x28/0x40
 cdns3_host_exit+0x20/0x40
 cdns3_role_stop+0x60/0x90
 cdns3_role_set+0x64/0xd8
 usb_role_switch_set_role.part.0+0x3c/0x68
 usb_role_switch_set_role+0x20/0x30
 tcpm_mux_set+0x60/0xf8
 tcpm_reset_port+0xa4/0xf0
 tcpm_detach.part.0+0x28/0x50
 tcpm_state_machine_work+0x12ac/0x2360
 process_one_work+0x1c8/0x470
 worker_thread+0x50/0x428
 kthread+0xfc/0x128
 ret_from_fork+0x10/0x18
Code: c8037c02 35ffffa3 17ffe7c3 f9800011 (c85f7c01)
---[ end trace 45b1a173d2679e44 ]---

[minor commit message cleanup  -Mathias]
Cc: Baolin Wang <baolin.wang@linaro.org>
Cc: <stable@vger.kernel.org>
Fixes: b0c69b4bace3 ("usb: host: plat: Enable xHCI plat runtime PM")
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Tested-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200514110432.25564-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-plat.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -363,6 +363,7 @@ static int xhci_plat_remove(struct platf
 	struct clk *reg_clk = xhci->reg_clk;
 	struct usb_hcd *shared_hcd = xhci->shared_hcd;
 
+	pm_runtime_get_sync(&dev->dev);
 	xhci->xhc_state |= XHCI_STATE_REMOVING;
 
 	usb_remove_hcd(shared_hcd);
@@ -376,8 +377,9 @@ static int xhci_plat_remove(struct platf
 	clk_disable_unprepare(reg_clk);
 	usb_put_hcd(hcd);
 
-	pm_runtime_set_suspended(&dev->dev);
 	pm_runtime_disable(&dev->dev);
+	pm_runtime_put_noidle(&dev->dev);
+	pm_runtime_set_suspended(&dev->dev);
 
 	return 0;
 }

[PATCH 5.4 111/147] usb: cdns3: gadget: prev_req->trb is NULL for ep0

[Greg Kroah-Hartman]

From: Peter Chen <peter.chen@nxp.com>

commit 95cd7dc47abd71d1a0c9c43594ff2fa32552f46c upstream.

And there are no multiple TRBs on EP0 and WA1 workaround,
so it doesn't need to change TRB for EP0. It fixes below oops.

configfs-gadget gadget: high-speed config #1: b
android_work: sent uevent USB_STATE=CONFIGURED
Unable to handle kernel read from unreadable memory at virtual address 0000000000000008
Mem abort info:
android_work: sent uevent USB_STATE=DISCONNECTED
  ESR = 0x96000004
  EC = 0x25: DABT (current EL), IL = 32 bits

  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
Data abort info:
  ISV = 0, ISS = 0x00000004
  CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=00000008b5bb7000
[0000000000000008] pgd=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 PID: 430 Comm: HwBinder:401_1 Not tainted 5.4.24-06071-g6fa8921409c1-dirty #77
Hardware name: Freescale i.MX8QXP MEK (DT)
pstate: 60400085 (nZCv daIf +PAN -UAO)
pc : cdns3_gadget_ep_dequeue+0x1d4/0x270
lr : cdns3_gadget_ep_dequeue+0x48/0x270
sp : ffff800012763ba0
x29: ffff800012763ba0 x28: ffff00082c653c00
x27: 0000000000000000 x26: ffff000068fa7b00
x25: ffff0000699b2000 x24: ffff00082c6ac000
x23: ffff000834f0a480 x22: ffff000834e87b9c
x21: 0000000000000000 x20: ffff000834e87800
x19: ffff000069eddc00 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000001
x11: ffff80001180fbe8 x10: 0000000000000001
x9 : ffff800012101558 x8 : 0000000000000001
x7 : 0000000000000006 x6 : ffff000835d9c668
x5 : ffff000834f0a4c8 x4 : 0000000096000000
x3 : 0000000000001810 x2 : 0000000000000000
x1 : ffff800024bd001c x0 : 0000000000000001
Call trace:
 cdns3_gadget_ep_dequeue+0x1d4/0x270
 usb_ep_dequeue+0x34/0xf8
 composite_dev_cleanup+0x154/0x170
 configfs_composite_unbind+0x6c/0xa8
 usb_gadget_remove_driver+0x44/0x70
 usb_gadget_unregister_driver+0x74/0xe0
 unregister_gadget+0x28/0x58
 gadget_dev_desc_UDC_store+0x80/0x110
 configfs_write_file+0x1e0/0x2a0
 __vfs_write+0x48/0x90
 vfs_write+0xe4/0x1c8
 ksys_write+0x78/0x100
 __arm64_sys_write+0x24/0x30
 el0_svc_common.constprop.0+0x74/0x168
 el0_svc_handler+0x34/0xa0
 el0_svc+0x8/0xc
Code: 52830203 b9407660 f94042e4 11000400 (b9400841)
---[ end trace 1574516e4c1772ca ]---
Kernel panic - not syncing: Fatal exception
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x0002,20002008
Memory Limit: none
Rebooting in 5 seconds..

Fixes: f616c3bda47e ("usb: cdns3: Fix dequeue implementation")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/cdns3/gadget.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/cdns3/gadget.c
+++ b/drivers/usb/cdns3/gadget.c
@@ -2105,7 +2105,7 @@ found:
 	link_trb = priv_req->trb;
 
 	/* Update ring only if removed request is on pending_req_list list */
-	if (req_on_hw_ring) {
+	if (req_on_hw_ring && link_trb) {
 		link_trb->buffer = TRB_BUFFER(priv_ep->trb_pool_dma +
 			((priv_req->end_trb + 1) * TRB_SIZE));
 		link_trb->control = (link_trb->control & TRB_CYCLE) |

[PATCH 5.4 112/147] USB: gadget: fix illegal array access in binding with UDC

[Greg Kroah-Hartman]

From: Kyungtae Kim <kt0755@gmail.com>

commit 15753588bcd4bbffae1cca33c8ced5722477fe1f upstream.

FuzzUSB (a variant of syzkaller) found an illegal array access
using an incorrect index while binding a gadget with UDC.

Reference: https://www.spinics.net/lists/linux-usb/msg194331.html

This bug occurs when a size variable used for a buffer
is misused to access its strcpy-ed buffer.
Given a buffer along with its size variable (taken from user input),
from which, a new buffer is created using kstrdup().
Due to the original buffer containing 0 value in the middle,
the size of the kstrdup-ed buffer becomes smaller than that of the original.
So accessing the kstrdup-ed buffer with the same size variable
triggers memory access violation.

The fix makes sure no zero value in the buffer,
by comparing the strlen() of the orignal buffer with the size variable,
so that the access to the kstrdup-ed buffer is safe.

BUG: KASAN: slab-out-of-bounds in gadget_dev_desc_UDC_store+0x1ba/0x200
drivers/usb/gadget/configfs.c:266
Read of size 1 at addr ffff88806a55dd7e by task syz-executor.0/17208

CPU: 2 PID: 17208 Comm: syz-executor.0 Not tainted 5.6.8 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xce/0x128 lib/dump_stack.c:118
 print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374
 __kasan_report+0x131/0x1b0 mm/kasan/report.c:506
 kasan_report+0x12/0x20 mm/kasan/common.c:641
 __asan_report_load1_noabort+0x14/0x20 mm/kasan/generic_report.c:132
 gadget_dev_desc_UDC_store+0x1ba/0x200 drivers/usb/gadget/configfs.c:266
 flush_write_buffer fs/configfs/file.c:251 [inline]
 configfs_write_file+0x2f1/0x4c0 fs/configfs/file.c:283
 __vfs_write+0x85/0x110 fs/read_write.c:494
 vfs_write+0x1cd/0x510 fs/read_write.c:558
 ksys_write+0x18a/0x220 fs/read_write.c:611
 __do_sys_write fs/read_write.c:623 [inline]
 __se_sys_write fs/read_write.c:620 [inline]
 __x64_sys_write+0x73/0xb0 fs/read_write.c:620
 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Signed-off-by: Kyungtae Kim <kt0755@gmail.com>
Reported-and-tested-by: Kyungtae Kim <kt0755@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200510054326.GA19198@pizza01
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/configfs.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -260,6 +260,9 @@ static ssize_t gadget_dev_desc_UDC_store
 	char *name;
 	int ret;
 
+	if (strlen(page) < len)
+		return -EOVERFLOW;
+
 	name = kstrdup(page, GFP_KERNEL);
 	if (!name)
 		return -ENOMEM;

[PATCH 5.4 113/147] usb: xhci: Fix NULL pointer dereference when enqueuing trbs from urb sg list

[Greg Kroah-Hartman]

From: Sriharsha Allenki <sallenki@codeaurora.org>

commit 3c6f8cb92c9178fc0c66b580ea3df1fa3ac1155a upstream.

On platforms with IOMMU enabled, multiple SGs can be coalesced into one
by the IOMMU driver. In that case the SG list processing as part of the
completion of a urb on a bulk endpoint can result into a NULL pointer
dereference with the below stack dump.

<6> Unable to handle kernel NULL pointer dereference at virtual address 0000000c
<6> pgd = c0004000
<6> [0000000c] *pgd=00000000
<6> Internal error: Oops: 5 [#1] PREEMPT SMP ARM
<2> PC is at xhci_queue_bulk_tx+0x454/0x80c
<2> LR is at xhci_queue_bulk_tx+0x44c/0x80c
<2> pc : [<c08907c4>]    lr : [<c08907bc>]    psr: 000000d3
<2> sp : ca337c80  ip : 00000000  fp : ffffffff
<2> r10: 00000000  r9 : 50037000  r8 : 00004000
<2> r7 : 00000000  r6 : 00004000  r5 : 00000000  r4 : 00000000
<2> r3 : 00000000  r2 : 00000082  r1 : c2c1a200  r0 : 00000000
<2> Flags: nzcv  IRQs off  FIQs off  Mode SVC_32  ISA ARM  Segment none
<2> Control: 10c0383d  Table: b412c06a  DAC: 00000051
<6> Process usb-storage (pid: 5961, stack limit = 0xca336210)
<snip>
<2> [<c08907c4>] (xhci_queue_bulk_tx)
<2> [<c0881b3c>] (xhci_urb_enqueue)
<2> [<c0831068>] (usb_hcd_submit_urb)
<2> [<c08350b4>] (usb_sg_wait)
<2> [<c089f384>] (usb_stor_bulk_transfer_sglist)
<2> [<c089f2c0>] (usb_stor_bulk_srb)
<2> [<c089fe38>] (usb_stor_Bulk_transport)
<2> [<c089f468>] (usb_stor_invoke_transport)
<2> [<c08a11b4>] (usb_stor_control_thread)
<2> [<c014a534>] (kthread)

The above NULL pointer dereference is the result of block_len and the
sent_len set to zero after the first SG of the list when IOMMU driver
is enabled. Because of this the loop of processing the SGs has run
more than num_sgs which resulted in a sg_next on the last SG of the
list which has SG_END set.

Fix this by check for the sg before any attributes of the sg are
accessed.

[modified reason for null pointer dereference in commit message subject -Mathias]
Fixes: f9c589e142d04 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer")
Cc: stable@vger.kernel.org
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200514110432.25564-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-ring.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -3421,8 +3421,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
 			/* New sg entry */
 			--num_sgs;
 			sent_len -= block_len;
-			if (num_sgs != 0) {
-				sg = sg_next(sg);
+			sg = sg_next(sg);
+			if (num_sgs != 0 && sg) {
 				block_len = sg_dma_len(sg);
 				addr = (u64) sg_dma_address(sg);
 				addr += sent_len;

[PATCH 5.4 114/147] Make the "Reducing compressed framebufer size" message be DRM_INFO_ONCE()

[Greg Kroah-Hartman]

From: Peter Jones <pjones@redhat.com>

commit 82152d424b6cb6fc1ede7d03d69c04e786688740 upstream.

This was sort of annoying me:

random:~$ dmesg | tail -1
[523884.039227] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
random:~$ dmesg | grep -c "Reducing the compressed"
47

This patch makes it DRM_INFO_ONCE() just like the similar message
farther down in that function is pr_info_once().

Cc: stable@vger.kernel.org
Signed-off-by: Peter Jones <pjones@redhat.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1745
Link: https://patchwork.freedesktop.org/patch/msgid/20180706190424.29194-1-pjones@redhat.com
[vsyrjala: Rebase due to per-device logging]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 6b7fc6a3e6af4ff5773949d0fed70d8e7f68d5ce)
[Rodrigo: port back to DRM_INFO_ONCE]
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/display/intel_fbc.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/gpu/drm/i915/display/intel_fbc.c
+++ b/drivers/gpu/drm/i915/display/intel_fbc.c
@@ -504,8 +504,7 @@ static int intel_fbc_alloc_cfb(struct in
 	if (!ret)
 		goto err_llb;
 	else if (ret > 1) {
-		DRM_INFO("Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.\n");
-
+		DRM_INFO_ONCE("Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.\n");
 	}
 
 	fbc->threshold = ret;

[PATCH 5.4 115/147] ARM: dts: dra7: Fix bus_dma_limit for PCIe

[Greg Kroah-Hartman]

From: Kishon Vijay Abraham I <kishon@ti.com>

commit 90d4d3f4ea45370d482fa609dbae4d2281b4074f upstream.

Even though commit cfb5d65f2595 ("ARM: dts: dra7: Add bus_dma_limit
for L3 bus") added bus_dma_limit for L3 bus, the PCIe controller
gets incorrect value of bus_dma_limit.

Fix it by adding empty dma-ranges property to axi@0 and axi@1
(parent device tree node of PCIe controller).

Cc: stable@kernel.org
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/dra7.dtsi |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -172,6 +172,7 @@
 			#address-cells = <1>;
 			ranges = <0x51000000 0x51000000 0x3000
 				  0x0	     0x20000000 0x10000000>;
+			dma-ranges;
 			/**
 			 * To enable PCI endpoint mode, disable the pcie1_rc
 			 * node and enable pcie1_ep mode.
@@ -185,7 +186,6 @@
 				device_type = "pci";
 				ranges = <0x81000000 0 0          0x03000 0 0x00010000
 					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
-				dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
 				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
@@ -230,6 +230,7 @@
 			#address-cells = <1>;
 			ranges = <0x51800000 0x51800000 0x3000
 				  0x0	     0x30000000 0x10000000>;
+			dma-ranges;
 			status = "disabled";
 			pcie2_rc: pcie@51800000 {
 				reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
@@ -240,7 +241,6 @@
 				device_type = "pci";
 				ranges = <0x81000000 0 0          0x03000 0 0x00010000
 					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
-				dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
 				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;

[PATCH 5.4 116/147] ARM: dts: imx27-phytec-phycard-s-rdk: Fix the I2C1 pinctrl entries

[Greg Kroah-Hartman]

From: Fabio Estevam <festevam@gmail.com>

commit 0caf34350a25907515d929a9c77b9b206aac6d1e upstream.

The I2C2 pins are already used and the following errors are seen:

imx27-pinctrl 10015000.iomuxc: pin MX27_PAD_I2C2_SDA already requested by 10012000.i2c; cannot claim for 1001d000.i2c
imx27-pinctrl 10015000.iomuxc: pin-69 (1001d000.i2c) status -22
imx27-pinctrl 10015000.iomuxc: could not request pin 69 (MX27_PAD_I2C2_SDA) from group i2c2grp  on device 10015000.iomuxc
imx-i2c 1001d000.i2c: Error applying setting, reverse things back
imx-i2c: probe of 1001d000.i2c failed with error -22

Fix it by adding the correct I2C1 IOMUX entries for the pinctrl_i2c1 group.

Cc: <stable@vger.kernel.org>
Fixes: 61664d0b432a ("ARM: dts: imx27 phyCARD-S pinctrl")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
@@ -75,8 +75,8 @@
 	imx27-phycard-s-rdk {
 		pinctrl_i2c1: i2c1grp {
 			fsl,pins = <
-				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
-				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+				MX27_PAD_I2C_DATA__I2C_DATA 0x0
+				MX27_PAD_I2C_CLK__I2C_CLK 0x0
 			>;
 		};
 

[PATCH 5.4 117/147] ARM: dts: imx6dl-yapp4: Fix Ursa board Ethernet connection

[Greg Kroah-Hartman]

From: Michal Vokáč <michal.vokac@ysoft.com>

commit cbe63a8358310244e6007398bd2c7c70c7fd51cd upstream.

The Y Soft yapp4 platform supports up to two Ethernet ports.
The Ursa board though has only one Ethernet port populated and that is
the port@2. Since the introduction of this platform into mainline a wrong
port was deleted and the Ethernet could never work. Fix this by deleting
the correct port node.

Fixes: 87489ec3a77f ("ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/imx6dl-yapp4-ursa.dts |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
+++ b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
@@ -38,7 +38,7 @@
 };
 
 &switch_ports {
-	/delete-node/ port@2;
+	/delete-node/ port@3;
 };
 
 &touchscreen {

[PATCH 5.4 118/147] drm/amd/display: add basic atomic check for cursor plane

[Greg Kroah-Hartman]

From: Simon Ser <contact@emersion.fr>

commit 626bf90fe03fa080d8df06bb0397c95c53ae8e27 upstream.

This patch adds a basic cursor check when an atomic test-only commit is
performed. The position and size of the cursor plane is checked.

This should fix user-space relying on atomic checks to assign buffers to
planes.

Signed-off-by: Simon Ser <contact@emersion.fr>
Reported-by: Roman Gilg <subdiff@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |   26 ++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -6921,6 +6921,7 @@ static int dm_update_plane_state(struct
 	struct drm_crtc_state *old_crtc_state, *new_crtc_state;
 	struct dm_crtc_state *dm_new_crtc_state, *dm_old_crtc_state;
 	struct dm_plane_state *dm_new_plane_state, *dm_old_plane_state;
+	struct amdgpu_crtc *new_acrtc;
 	bool needs_reset;
 	int ret = 0;
 
@@ -6930,9 +6931,30 @@ static int dm_update_plane_state(struct
 	dm_new_plane_state = to_dm_plane_state(new_plane_state);
 	dm_old_plane_state = to_dm_plane_state(old_plane_state);
 
-	/*TODO Implement atomic check for cursor plane */
-	if (plane->type == DRM_PLANE_TYPE_CURSOR)
+	/*TODO Implement better atomic check for cursor plane */
+	if (plane->type == DRM_PLANE_TYPE_CURSOR) {
+		if (!enable || !new_plane_crtc ||
+			drm_atomic_plane_disabling(plane->state, new_plane_state))
+			return 0;
+
+		new_acrtc = to_amdgpu_crtc(new_plane_crtc);
+
+		if ((new_plane_state->crtc_w > new_acrtc->max_cursor_width) ||
+			(new_plane_state->crtc_h > new_acrtc->max_cursor_height)) {
+			DRM_DEBUG_ATOMIC("Bad cursor size %d x %d\n",
+							 new_plane_state->crtc_w, new_plane_state->crtc_h);
+			return -EINVAL;
+		}
+
+		if (new_plane_state->crtc_x <= -new_acrtc->max_cursor_width ||
+			new_plane_state->crtc_y <= -new_acrtc->max_cursor_height) {
+			DRM_DEBUG_ATOMIC("Bad cursor position %d, %d\n",
+							 new_plane_state->crtc_x, new_plane_state->crtc_y);
+			return -EINVAL;
+		}
+
 		return 0;
+	}
 
 	needs_reset = should_reset_plane(state, plane, old_plane_state,
 					 new_plane_state);

[PATCH 5.4 119/147] powerpc/32s: Fix build failure with CONFIG_PPC_KUAP_DEBUG

[Greg Kroah-Hartman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

commit 4833ce06e6855d526234618b746ffb71d6612c9a upstream.

gpr2 is not a parametre of kuap_check(), it doesn't exist.

Use gpr instead.

Fixes: a68c31fc01ef ("powerpc/32s: Implement Kernel Userspace Access Protection")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/ea599546f2a7771bde551393889e44e6b2632332.1587368807.git.christophe.leroy@c-s.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/book3s/32/kup.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/powerpc/include/asm/book3s/32/kup.h
+++ b/arch/powerpc/include/asm/book3s/32/kup.h
@@ -75,7 +75,7 @@
 
 .macro kuap_check	current, gpr
 #ifdef CONFIG_PPC_KUAP_DEBUG
-	lwz	\gpr2, KUAP(thread)
+	lwz	\gpr, KUAP(thread)
 999:	twnei	\gpr, 0
 	EMIT_BUG_ENTRY 999b, __FILE__, __LINE__, (BUGFLAG_WARNING | BUGFLAG_ONCE)
 #endif

[PATCH 5.4 120/147] cifs: fix leaked reference on requeued write

[Greg Kroah-Hartman]

From: Adam McCoy <adam@forsedomani.com>

commit a48137996063d22ffba77e077425f49873856ca5 upstream.

Failed async writes that are requeued may not clean up a refcount
on the file, which can result in a leaked open. This scenario arises
very reliably when using persistent handles and a reconnect occurs
while writing.

cifs_writev_requeue only releases the reference if the write fails
(rc != 0). The server->ops->async_writev operation will take its own
reference, so the initial reference can always be released.

Signed-off-by: Adam McCoy <adam@forsedomani.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/cifssmb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -2135,8 +2135,8 @@ cifs_writev_requeue(struct cifs_writedat
 			}
 		}
 
+		kref_put(&wdata2->refcount, cifs_writedata_release);
 		if (rc) {
-			kref_put(&wdata2->refcount, cifs_writedata_release);
 			if (is_retryable_error(rc))
 				continue;
 			i += nr_pages;

[PATCH 5.4 121/147] x86: Fix early boot crash on gcc-10, third try

[Greg Kroah-Hartman]

From: Borislav Petkov <bp@suse.de>

commit a9a3ed1eff3601b63aea4fb462d8b3b92c7c1e7e upstream.

... or the odyssey of trying to disable the stack protector for the
function which generates the stack canary value.

The whole story started with Sergei reporting a boot crash with a kernel
built with gcc-10:

  Kernel panic — not syncing: stack-protector: Kernel stack is corrupted in: start_secondary
  CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc5—00235—gfffb08b37df9 #139
  Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M—D3H, BIOS F12 11/14/2013
  Call Trace:
    dump_stack
    panic
    ? start_secondary
    __stack_chk_fail
    start_secondary
    secondary_startup_64
  -—-[ end Kernel panic — not syncing: stack—protector: Kernel stack is corrupted in: start_secondary

This happens because gcc-10 tail-call optimizes the last function call
in start_secondary() - cpu_startup_entry() - and thus emits a stack
canary check which fails because the canary value changes after the
boot_init_stack_canary() call.

To fix that, the initial attempt was to mark the one function which
generates the stack canary with:

  __attribute__((optimize("-fno-stack-protector"))) ... start_secondary(void *unused)

however, using the optimize attribute doesn't work cumulatively
as the attribute does not add to but rather replaces previously
supplied optimization options - roughly all -fxxx options.

The key one among them being -fno-omit-frame-pointer and thus leading to
not present frame pointer - frame pointer which the kernel needs.

The next attempt to prevent compilers from tail-call optimizing
the last function call cpu_startup_entry(), shy of carving out
start_secondary() into a separate compilation unit and building it with
-fno-stack-protector, was to add an empty asm("").

This current solution was short and sweet, and reportedly, is supported
by both compilers but we didn't get very far this time: future (LTO?)
optimization passes could potentially eliminate this, which leads us
to the third attempt: having an actual memory barrier there which the
compiler cannot ignore or move around etc.

That should hold for a long time, but hey we said that about the other
two solutions too so...

Reported-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Kalle Valo <kvalo@codeaurora.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200314164451.346497-1-slyfox@gentoo.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/stackprotector.h |    7 ++++++-
 arch/x86/kernel/smpboot.c             |    8 ++++++++
 arch/x86/xen/smp_pv.c                 |    1 +
 include/linux/compiler.h              |    6 ++++++
 init/main.c                           |    2 ++
 5 files changed, 23 insertions(+), 1 deletion(-)

--- a/arch/x86/include/asm/stackprotector.h
+++ b/arch/x86/include/asm/stackprotector.h
@@ -55,8 +55,13 @@
 /*
  * Initialize the stackprotector canary value.
  *
- * NOTE: this must only be called from functions that never return,
+ * NOTE: this must only be called from functions that never return
  * and it must always be inlined.
+ *
+ * In addition, it should be called from a compilation unit for which
+ * stack protector is disabled. Alternatively, the caller should not end
+ * with a function call which gets tail-call optimized as that would
+ * lead to checking a modified canary value.
  */
 static __always_inline void boot_init_stack_canary(void)
 {
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -262,6 +262,14 @@ static void notrace start_secondary(void
 
 	wmb();
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
+
+	/*
+	 * Prevent tail call to cpu_startup_entry() because the stack protector
+	 * guard has been changed a couple of function calls up, in
+	 * boot_init_stack_canary() and must not be checked before tail calling
+	 * another function.
+	 */
+	prevent_tail_call_optimization();
 }
 
 /**
--- a/arch/x86/xen/smp_pv.c
+++ b/arch/x86/xen/smp_pv.c
@@ -92,6 +92,7 @@ asmlinkage __visible void cpu_bringup_an
 	cpu_bringup();
 	boot_init_stack_canary();
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
+	prevent_tail_call_optimization();
 }
 
 void xen_smp_intr_free_pv(unsigned int cpu)
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -356,4 +356,10 @@ static inline void *offset_to_ptr(const
 /* &a[0] degrades to a pointer: a different type from an array */
 #define __must_be_array(a)	BUILD_BUG_ON_ZERO(__same_type((a), &(a)[0]))
 
+/*
+ * This is needed in functions which generate the stack canary, see
+ * arch/x86/kernel/smpboot.c::start_secondary() for an example.
+ */
+#define prevent_tail_call_optimization()	mb()
+
 #endif /* __LINUX_COMPILER_H */
--- a/init/main.c
+++ b/init/main.c
@@ -782,6 +782,8 @@ asmlinkage __visible void __init start_k
 
 	/* Do the rest non-__init'ed, we're now alive */
 	arch_call_rest_init();
+
+	prevent_tail_call_optimization();
 }
 
 /* Call all constructor functions linked into the kernel. */

[PATCH 5.4 122/147] x86/unwind/orc: Fix error handling in __unwind_start()

[Greg Kroah-Hartman]

From: Josh Poimboeuf <jpoimboe@redhat.com>

commit 71c95825289f585014fe9741b051d32a7a916680 upstream.

The unwind_state 'error' field is used to inform the reliable unwinding
code that the stack trace can't be trusted.  Set this field for all
errors in __unwind_start().

Also, move the zeroing out of the unwind_state struct to before the ORC
table initialization check, to prevent the caller from reading
uninitialized data if the ORC table is corrupted.

Fixes: af085d9084b4 ("stacktrace/x86: add function for detecting reliable stack traces")
Fixes: d3a09104018c ("x86/unwinder/orc: Dont bail on stack overflow")
Fixes: 98d0c8ebf77e ("x86/unwind/orc: Prevent unwinding before ORC initialization")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/d6ac7215a84ca92b895fdd2e1aa546729417e6e6.1589487277.git.jpoimboe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/unwind_orc.c |   16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

--- a/arch/x86/kernel/unwind_orc.c
+++ b/arch/x86/kernel/unwind_orc.c
@@ -608,23 +608,23 @@ EXPORT_SYMBOL_GPL(unwind_next_frame);
 void __unwind_start(struct unwind_state *state, struct task_struct *task,
 		    struct pt_regs *regs, unsigned long *first_frame)
 {
-	if (!orc_init)
-		goto done;
-
 	memset(state, 0, sizeof(*state));
 	state->task = task;
 
+	if (!orc_init)
+		goto err;
+
 	/*
 	 * Refuse to unwind the stack of a task while it's executing on another
 	 * CPU.  This check is racy, but that's ok: the unwinder has other
 	 * checks to prevent it from going off the rails.
 	 */
 	if (task_on_another_cpu(task))
-		goto done;
+		goto err;
 
 	if (regs) {
 		if (user_mode(regs))
-			goto done;
+			goto the_end;
 
 		state->ip = regs->ip;
 		state->sp = regs->sp;
@@ -657,6 +657,7 @@ void __unwind_start(struct unwind_state
 		 * generate some kind of backtrace if this happens.
 		 */
 		void *next_page = (void *)PAGE_ALIGN((unsigned long)state->sp);
+		state->error = true;
 		if (get_stack_info(next_page, state->task, &state->stack_info,
 				   &state->stack_mask))
 			return;
@@ -682,8 +683,9 @@ void __unwind_start(struct unwind_state
 
 	return;
 
-done:
+err:
+	state->error = true;
+the_end:
 	state->stack_info.type = STACK_TYPE_UNKNOWN;
-	return;
 }
 EXPORT_SYMBOL_GPL(__unwind_start);

[PATCH 5.4 123/147] exec: Move would_dump into flush_old_exec

[Greg Kroah-Hartman]

From: Eric W. Biederman <ebiederm@xmission.com>

commit f87d1c9559164294040e58f5e3b74a162bf7c6e8 upstream.

I goofed when I added mm->user_ns support to would_dump.  I missed the
fact that in the case of binfmt_loader, binfmt_em86, binfmt_misc, and
binfmt_script bprm->file is reassigned.  Which made the move of
would_dump from setup_new_exec to __do_execve_file before exec_binprm
incorrect as it can result in would_dump running on the script instead
of the interpreter of the script.

The net result is that the code stopped making unreadable interpreters
undumpable.  Which allows them to be ptraced and written to disk
without special permissions.  Oops.

The move was necessary because the call in set_new_exec was after
bprm->mm was no longer valid.

To correct this mistake move the misplaced would_dump from
__do_execve_file into flos_old_exec, before exec_mmap is called.

I tested and confirmed that without this fix I can attach with gdb to
a script with an unreadable interpreter, and with this fix I can not.

Cc: stable@vger.kernel.org
Fixes: f84df2a6f268 ("exec: Ensure mm->user_ns contains the execed files")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/exec.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1274,6 +1274,8 @@ int flush_old_exec(struct linux_binprm *
 	 */
 	set_mm_exe_file(bprm->mm, bprm->file);
 
+	would_dump(bprm, bprm->file);
+
 	/*
 	 * Release all of the old mmap stuff
 	 */
@@ -1817,8 +1819,6 @@ static int __do_execve_file(int fd, stru
 	if (retval < 0)
 		goto out;
 
-	would_dump(bprm, bprm->file);
-
 	retval = exec_binprm(bprm);
 	if (retval < 0)
 		goto out;

[PATCH 5.4 124/147] clk: rockchip: fix incorrect configuration of rk3228 aclk_gpu* clocks

[Greg Kroah-Hartman]

From: Justin Swartz <justin.swartz@risingedge.co.za>

commit cec9d101d70a3509da9bd2e601e0b242154ce616 upstream.

The following changes prevent the unrecoverable freezes and rcu_sched
stall warnings experienced in each of my attempts to take advantage of
lima.

Replace the COMPOSITE_NOGATE definition of aclk_gpu_pre with a
COMPOSITE that retains the selection of HDMIPHY as the PLL source, but
instead makes uses of the aclk_gpu PLL source gate and parent names
defined by mux_pll_src_4plls_p rather than mux_aclk_gpu_pre_p.

Remove the now unused mux_aclk_gpu_pre_p and the four named but also
unused definitions (cpll_gpu, gpll_gpu, hdmiphy_gpu and usb480m_gpu)
of the aclk_gpu PLL source gate.

Use the correct gate offset for aclk_gpu and aclk_gpu_noc.

Fixes: 307a2e9ac524 ("clk: rockchip: add clock controller for rk3228")
Cc: stable@vger.kernel.org
Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
[double-checked against SoC manual and added fixes tag]
Link: https://lore.kernel.org/r/20200114162503.7548-1-justin.swartz@risingedge.co.za
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/clk/rockchip/clk-rk3228.c |   17 ++++-------------
 1 file changed, 4 insertions(+), 13 deletions(-)

--- a/drivers/clk/rockchip/clk-rk3228.c
+++ b/drivers/clk/rockchip/clk-rk3228.c
@@ -156,8 +156,6 @@ PNAME(mux_i2s_out_p)		= { "i2s1_pre", "x
 PNAME(mux_i2s2_p)		= { "i2s2_src", "i2s2_frac", "xin12m" };
 PNAME(mux_sclk_spdif_p)		= { "sclk_spdif_src", "spdif_frac", "xin12m" };
 
-PNAME(mux_aclk_gpu_pre_p)	= { "cpll_gpu", "gpll_gpu", "hdmiphy_gpu", "usb480m_gpu" };
-
 PNAME(mux_uart0_p)		= { "uart0_src", "uart0_frac", "xin24m" };
 PNAME(mux_uart1_p)		= { "uart1_src", "uart1_frac", "xin24m" };
 PNAME(mux_uart2_p)		= { "uart2_src", "uart2_frac", "xin24m" };
@@ -468,16 +466,9 @@ static struct rockchip_clk_branch rk3228
 			RK2928_CLKSEL_CON(24), 6, 10, DFLAGS,
 			RK2928_CLKGATE_CON(2), 8, GFLAGS),
 
-	GATE(0, "cpll_gpu", "cpll", 0,
-			RK2928_CLKGATE_CON(3), 13, GFLAGS),
-	GATE(0, "gpll_gpu", "gpll", 0,
-			RK2928_CLKGATE_CON(3), 13, GFLAGS),
-	GATE(0, "hdmiphy_gpu", "hdmiphy", 0,
-			RK2928_CLKGATE_CON(3), 13, GFLAGS),
-	GATE(0, "usb480m_gpu", "usb480m", 0,
+	COMPOSITE(0, "aclk_gpu_pre", mux_pll_src_4plls_p, 0,
+			RK2928_CLKSEL_CON(34), 5, 2, MFLAGS, 0, 5, DFLAGS,
 			RK2928_CLKGATE_CON(3), 13, GFLAGS),
-	COMPOSITE_NOGATE(0, "aclk_gpu_pre", mux_aclk_gpu_pre_p, 0,
-			RK2928_CLKSEL_CON(34), 5, 2, MFLAGS, 0, 5, DFLAGS),
 
 	COMPOSITE(SCLK_SPI0, "sclk_spi0", mux_pll_src_2plls_p, 0,
 			RK2928_CLKSEL_CON(25), 8, 1, MFLAGS, 0, 7, DFLAGS,
@@ -582,8 +573,8 @@ static struct rockchip_clk_branch rk3228
 	GATE(0, "pclk_peri_noc", "pclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(12), 2, GFLAGS),
 
 	/* PD_GPU */
-	GATE(ACLK_GPU, "aclk_gpu", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(13), 14, GFLAGS),
-	GATE(0, "aclk_gpu_noc", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(13), 15, GFLAGS),
+	GATE(ACLK_GPU, "aclk_gpu", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(7), 14, GFLAGS),
+	GATE(0, "aclk_gpu_noc", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(7), 15, GFLAGS),
 
 	/* PD_BUS */
 	GATE(0, "sclk_initmem_mbist", "aclk_cpu", 0, RK2928_CLKGATE_CON(8), 1, GFLAGS),

[PATCH 5.4 125/147] dwc3: Remove check for HWO flag in dwc3_gadget_ep_reclaim_trb_sg()

[Greg Kroah-Hartman]

From: John Stultz <john.stultz@linaro.org>

commit 00e21763f2c8cab21b7befa52996d1b18bde5c42 upstream.

The check for the HWO flag in dwc3_gadget_ep_reclaim_trb_sg()
causes us to break out of the loop before we call
dwc3_gadget_ep_reclaim_completed_trb(), which is what likely
should be clearing the HWO flag.

This can cause odd behavior where we never reclaim all the trbs
in the sg list, so we never call giveback on a usb req, and that
will causes transfer stalls.

This effectively resovles the adb stalls seen on HiKey960
after userland changes started only using AIO in adbd.

Cc: YongQin Liu <yongqin.liu@linaro.org>
Cc: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
Cc: Yang Fei <fei.yang@intel.com>
Cc: Thinh Nguyen <thinhn@synopsys.com>
Cc: Tejas Joglekar <tejas.joglekar@synopsys.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: Josh Gao <jmgao@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Cc: stable@vger.kernel.org #4.20+
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/dwc3/gadget.c |    3 ---
 1 file changed, 3 deletions(-)

--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2480,9 +2480,6 @@ static int dwc3_gadget_ep_reclaim_trb_sg
 	for_each_sg(sg, s, pending, i) {
 		trb = &dep->trb_pool[dep->trb_dequeue];
 
-		if (trb->ctrl & DWC3_TRB_CTRL_HWO)
-			break;
-
 		req->sg = sg_next(s);
 		req->num_pending_sgs--;
 

[PATCH 5.4 126/147] fanotify: fix merging marks masks with FAN_ONDIR

[Greg Kroah-Hartman]

From: Amir Goldstein <amir73il@gmail.com>

commit 55bf882c7f13dda8bbe624040c6d5b4fbb812d16 upstream.

Change the logic of FAN_ONDIR in two ways that are similar to the logic
of FAN_EVENT_ON_CHILD, that was fixed in commit 54a307ba8d3c ("fanotify:
fix logic of events on child"):

1. The flag is meaningless in ignore mask
2. The flag refers only to events in the mask of the mark where it is set

This is what the fanotify_mark.2 man page says about FAN_ONDIR:
"Without this flag, only events for files are created."  It doesn't
say anything about setting this flag in ignore mask to stop getting
events on directories nor can I think of any setup where this capability
would be useful.

Currently, when marks masks are merged, the FAN_ONDIR flag set in one
mark affects the events that are set in another mark's mask and this
behavior causes unexpected results.  For example, a user adds a mark on a
directory with mask FAN_ATTRIB | FAN_ONDIR and a mount mark with mask
FAN_OPEN (without FAN_ONDIR).  An opendir() of that directory (which is
inside that mount) generates a FAN_OPEN event even though neither of the
marks requested to get open events on directories.

Link: https://lore.kernel.org/r/20200319151022.31456-10-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Rachel Sibley <rasibley@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/notify/fanotify/fanotify.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

--- a/fs/notify/fanotify/fanotify.c
+++ b/fs/notify/fanotify/fanotify.c
@@ -172,6 +172,13 @@ static u32 fanotify_group_event_mask(str
 			continue;
 		mark = iter_info->marks[type];
 		/*
+		 * If the event is on dir and this mark doesn't care about
+		 * events on dir, don't send it!
+		 */
+		if (event_mask & FS_ISDIR && !(mark->mask & FS_ISDIR))
+			continue;
+
+		/*
 		 * If the event is for a child and this mark doesn't care about
 		 * events on a child, don't send it!
 		 */
@@ -203,10 +210,6 @@ static u32 fanotify_group_event_mask(str
 		user_mask &= ~FAN_ONDIR;
 	}
 
-	if (event_mask & FS_ISDIR &&
-	    !(marks_mask & FS_ISDIR & ~marks_ignored_mask))
-		return 0;
-
 	return test_mask & user_mask;
 }
 

[PATCH 5.4 127/147] usb: gadget: net2272: Fix a memory leak in an error handling path in net2272_plat_probe()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

commit ccaef7e6e354fb65758eaddd3eae8065a8b3e295 upstream.

'dev' is allocated in 'net2272_probe_init()'. It must be freed in the error
handling path, as already done in the remove function (i.e.
'net2272_plat_remove()')

Fixes: 90fccb529d24 ("usb: gadget: Gadget directory cleanup - group UDC drivers")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/udc/net2272.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/gadget/udc/net2272.c
+++ b/drivers/usb/gadget/udc/net2272.c
@@ -2647,6 +2647,8 @@ net2272_plat_probe(struct platform_devic
  err_req:
 	release_mem_region(base, len);
  err:
+	kfree(dev);
+
 	return ret;
 }
 

[PATCH 5.4 128/147] usb: gadget: audio: Fix a missing error return value in audio_bind()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

commit 19b94c1f9c9a16d41a8de3ccbdb8536cf1aecdbf upstream.

If 'usb_otg_descriptor_alloc()' fails, we must return an error code, not 0.

Fixes: 56023ce0fd70 ("usb: gadget: audio: allocate and init otg descriptor by otg capabilities")
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/legacy/audio.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/usb/gadget/legacy/audio.c
+++ b/drivers/usb/gadget/legacy/audio.c
@@ -300,8 +300,10 @@ static int audio_bind(struct usb_composi
 		struct usb_descriptor_header *usb_desc;
 
 		usb_desc = usb_otg_descriptor_alloc(cdev->gadget);
-		if (!usb_desc)
+		if (!usb_desc) {
+			status = -ENOMEM;
 			goto fail;
+		}
 		usb_otg_descriptor_init(cdev->gadget, usb_desc);
 		otg_desc[0] = usb_desc;
 		otg_desc[1] = NULL;

[PATCH 5.4 129/147] usb: gadget: legacy: fix error return code in gncm_bind()

[Greg Kroah-Hartman]

From: Wei Yongjun <weiyongjun1@huawei.com>

commit e27d4b30b71c66986196d8a1eb93cba9f602904a upstream.

If 'usb_otg_descriptor_alloc()' fails, we must return a
negative error code -ENOMEM, not 0.

Fixes: 1156e91dd7cc ("usb: gadget: ncm: allocate and init otg descriptor by otg capabilities")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/legacy/ncm.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/usb/gadget/legacy/ncm.c
+++ b/drivers/usb/gadget/legacy/ncm.c
@@ -156,8 +156,10 @@ static int gncm_bind(struct usb_composit
 		struct usb_descriptor_header *usb_desc;
 
 		usb_desc = usb_otg_descriptor_alloc(gadget);
-		if (!usb_desc)
+		if (!usb_desc) {
+			status = -ENOMEM;
 			goto fail;
+		}
 		usb_otg_descriptor_init(gadget, usb_desc);
 		otg_desc[0] = usb_desc;
 		otg_desc[1] = NULL;

[PATCH 5.4 130/147] usb: gadget: legacy: fix error return code in cdc_bind()

[Greg Kroah-Hartman]

From: Wei Yongjun <weiyongjun1@huawei.com>

commit e8f7f9e3499a6d96f7f63a4818dc7d0f45a7783b upstream.

If 'usb_otg_descriptor_alloc()' fails, we must return a
negative error code -ENOMEM, not 0.

Fixes: ab6796ae9833 ("usb: gadget: cdc2: allocate and init otg descriptor by otg capabilities")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/legacy/cdc2.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/usb/gadget/legacy/cdc2.c
+++ b/drivers/usb/gadget/legacy/cdc2.c
@@ -179,8 +179,10 @@ static int cdc_bind(struct usb_composite
 		struct usb_descriptor_header *usb_desc;
 
 		usb_desc = usb_otg_descriptor_alloc(gadget);
-		if (!usb_desc)
+		if (!usb_desc) {
+			status = -ENOMEM;
 			goto fail1;
+		}
 		usb_otg_descriptor_init(gadget, usb_desc);
 		otg_desc[0] = usb_desc;
 		otg_desc[1] = NULL;

[PATCH 5.4 131/147] Revert "ALSA: hda/realtek: Fix pop noise on ALC225"

[Greg Kroah-Hartman]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

commit f41224efcf8aafe80ea47ac870c5e32f3209ffc8 upstream.

This reverts commit 3b36b13d5e69d6f51ff1c55d1b404a74646c9757.

Enable power save node breaks some systems with ACL225. Revert the patch
and use a platform specific quirk for the original issue isntead.

Fixes: 3b36b13d5e69 ("ALSA: hda/realtek: Fix pop noise on ALC225")
BugLink: https://bugs.launchpad.net/bugs/1875916
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200503152449.22761-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |    2 --
 1 file changed, 2 deletions(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8150,8 +8150,6 @@ static int patch_alc269(struct hda_codec
 		spec->gen.mixer_nid = 0;
 		break;
 	case 0x10ec0225:
-		codec->power_save_node = 1;
-		/* fall through */
 	case 0x10ec0295:
 	case 0x10ec0299:
 		spec->codec_variant = ALC269_TYPE_ALC225;

[PATCH 5.4 132/147] clk: Unlink clock if failed to prepare or enable

[Greg Kroah-Hartman]

From: Marc Zyngier <maz@kernel.org>

commit 018d4671b9bbd4a5c55cf6eab3e1dbc70a50b66e upstream.

On failing to prepare or enable a clock, remove the core structure
from the list it has been inserted as it is about to be freed.

This otherwise leads to random crashes when subsequent clocks get
registered, during which parsing of the clock tree becomes adventurous.

Observed with QEMU's RPi-3 emulation.

Fixes: 12ead77432f2 ("clk: Don't try to enable critical clocks if prepare failed")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Link: https://lkml.kernel.org/r/20200505140953.409430-1-maz@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/clk/clk.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3448,6 +3448,9 @@ static int __clk_core_init(struct clk_co
 out:
 	clk_pm_runtime_put(core);
 unlock:
+	if (ret)
+		hlist_del_init(&core->child_node);
+
 	clk_prepare_unlock();
 
 	if (!ret)

[PATCH 5.4 133/147] arm64: dts: meson-g12b-khadas-vim3: add missing frddr_a status property

[Greg Kroah-Hartman]

From: Neil Armstrong <narmstrong@baylibre.com>

commit 5ac0869fb39b1c1ba84d4d75c550f82e0bf44c96 upstream.

In the process of moving the VIM3 audio nodes to a G12B specific dtsi
for enabling the SM1 based VIM3L, the frddr_a status = "okay" property
got dropped.
This re-enables the frddr_a node to fix audio support.

Fixes: 4f26cc1c96c9 ("arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi")
Reported-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20191018140216.4257-1-narmstrong@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi |    4 ++++
 1 file changed, 4 insertions(+)

--- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
@@ -152,6 +152,10 @@
 	clock-latency = <50000>;
 };
 
+&frddr_a {
+	status = "okay";
+};
+
 &frddr_b {
 	status = "okay";
 };

[PATCH 5.4 134/147] arm64: dts: meson-g12-common: fix dwc2 clock names

[Greg Kroah-Hartman]

From: Neil Armstrong <narmstrong@baylibre.com>

commit e4f634d812634067b0c661af2e3cecfd629c89b8 upstream.

Use the correct dwc2 clock name.

Fixes: 9baf7d6be730 ("arm64: dts: meson: g12a: Add G12A USB nodes")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20200326160857.11929-3-narmstrong@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -2365,7 +2365,7 @@
 				reg = <0x0 0xff400000 0x0 0x40000>;
 				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
-				clock-names = "ddr";
+				clock-names = "otg";
 				phys = <&usb2_phy1>;
 				phy-names = "usb2-phy";
 				dr_mode = "peripheral";

[PATCH 5.4 135/147] arm64: dts: rockchip: Replace RK805 PMIC node name with "pmic" on rk3328 boards

[Greg Kroah-Hartman]

From: Chen-Yu Tsai <wens@csie.org>

commit 83b994129fb4c18a8460fd395864a28740e5e7fb upstream.

In some board device tree files, "rk805" was used for the RK805 PMIC's
node name. However the policy for device trees is that generic names
should be used.

Replace the "rk805" node name with the generic "pmic" name.

Fixes: 1e28037ec88e ("arm64: dts: rockchip: add rk805 node for rk3328-evb")
Fixes: 955bebde057e ("arm64: dts: rockchip: add rk3328-rock64 board")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200327030414.5903-3-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/boot/dts/rockchip/rk3328-evb.dts    |    2 +-
 arch/arm64/boot/dts/rockchip/rk3328-rock64.dts |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
@@ -92,7 +92,7 @@
 &i2c1 {
 	status = "okay";
 
-	rk805: rk805@18 {
+	rk805: pmic@18 {
 		compatible = "rockchip,rk805";
 		reg = <0x18>;
 		interrupt-parent = <&gpio2>;
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -169,7 +169,7 @@
 &i2c1 {
 	status = "okay";
 
-	rk805: rk805@18 {
+	rk805: pmic@18 {
 		compatible = "rockchip,rk805";
 		reg = <0x18>;
 		interrupt-parent = <&gpio2>;

[PATCH 5.4 136/147] arm64: dts: rockchip: Rename dwc3 device nodes on rk3399 to make dtc happy

[Greg Kroah-Hartman]

From: Chen-Yu Tsai <wens@csie.org>

commit 190c7f6fd43a776d4a6da1dac44408104649e9b7 upstream.

The device tree compiler complains that the dwc3 nodes have regs
properties but no matching unit addresses.

Add the unit addresses to the device node name. While at it, also rename
the nodes from "dwc3" to "usb", as guidelines require device nodes have
generic names.

Fixes: 7144224f2c2b ("arm64: dts: rockchip: support dwc3 USB for rk3399")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200327030414.5903-7-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -410,7 +410,7 @@
 		reset-names = "usb3-otg";
 		status = "disabled";
 
-		usbdrd_dwc3_0: dwc3 {
+		usbdrd_dwc3_0: usb@fe800000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0xfe800000 0x0 0x100000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -446,7 +446,7 @@
 		reset-names = "usb3-otg";
 		status = "disabled";
 
-		usbdrd_dwc3_1: dwc3 {
+		usbdrd_dwc3_1: usb@fe900000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0xfe900000 0x0 0x100000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;

[PATCH 5.4 137/147] arm64: dts: imx8mn: Change SDMA1 ahb clock for imx8mn

[Greg Kroah-Hartman]

From: Adam Ford <aford173@gmail.com>

commit 15ddc3e17aec0de4c69d595b873e184432b9791d upstream.

Using SDMA1 with UART1 is causing a "Timeout waiting for CH0" error.
This patch changes to ahb clock from SDMA1_ROOT to AHB which fixes the
timeout error.

Fixes: 6c3debcbae47 ("arm64: dts: freescale: Add i.MX8MN dtsi support")

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/boot/dts/freescale/imx8mn.dtsi |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -616,7 +616,7 @@
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MN_CLK_SDMA1_ROOT>,
-					 <&clk IMX8MN_CLK_SDMA1_ROOT>;
+					 <&clk IMX8MN_CLK_AHB>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";

[PATCH 5.4 138/147] ARM: dts: r8a73a4: Add missing CMT1 interrupts

[Greg Kroah-Hartman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

commit 0f739fdfe9e5ce668bd6d3210f310df282321837 upstream.

The R-Mobile APE6 Compare Match Timer 1 generates 8 interrupts, one for
each channel, but currently only 1 is described.
Fix this by adding the missing interrupts.

Fixes: f7b65230019b9dac ("ARM: shmobile: r8a73a4: Add CMT1 node")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200408090926.25201-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/r8a73a4.dtsi |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -131,7 +131,14 @@
 	cmt1: timer@e6130000 {
 		compatible = "renesas,r8a73a4-cmt1", "renesas,rcar-gen2-cmt1";
 		reg = <0 0xe6130000 0 0x1004>;
-		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_CMT1>;
 		clock-names = "fck";
 		power-domains = <&pd_c5>;

[PATCH 5.4 139/147] arm64: dts: renesas: r8a77980: Fix IPMMU VIP[01] nodes

[Greg Kroah-Hartman]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

commit f4d71c6ea9e58c07dd4d02d09c5dd9bb780ec4b1 upstream.

Missing the renesas,ipmmu-main property on ipmmu_vip[01] nodes.

Fixes: 55697cbb44e4 ("arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes)
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1587108543-23786-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/boot/dts/renesas/r8a77980.dtsi |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -1318,6 +1318,7 @@
 		ipmmu_vip0: mmu@e7b00000 {
 			compatible = "renesas,ipmmu-r8a77980";
 			reg = <0 0xe7b00000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
 			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
@@ -1325,6 +1326,7 @@
 		ipmmu_vip1: mmu@e7960000 {
 			compatible = "renesas,ipmmu-r8a77980";
 			reg = <0 0xe7960000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 11>;
 			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};

[PATCH 5.4 140/147] ARM: dts: r8a7740: Add missing extal2 to CPG node

[Greg Kroah-Hartman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

commit e47cb97f153193d4b41ca8d48127da14513d54c7 upstream.

The Clock Pulse Generator (CPG) device node lacks the extal2 clock.
This may lead to a failure registering the "r" clock, or to a wrong
parent for the "usb24s" clock, depending on MD_CK2 pin configuration and
boot loader CPG_USBCKCR register configuration.

This went unnoticed, as this does not affect the single upstream board
configuration, which relies on the first clock input only.

Fixes: d9ffd583bf345e2e ("ARM: shmobile: r8a7740: add SoC clocks to DTS")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Link: https://lore.kernel.org/r/20200508095918.6061-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/r8a7740.dtsi |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -479,7 +479,7 @@
 		cpg_clocks: cpg_clocks@e6150000 {
 			compatible = "renesas,r8a7740-cpg-clocks";
 			reg = <0xe6150000 0x10000>;
-			clocks = <&extal1_clk>, <&extalr_clk>;
+			clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>;
 			#clock-cells = <1>;
 			clock-output-names = "system", "pllc0", "pllc1",
 					     "pllc2", "r",

[PATCH 5.4 141/147] SUNRPC: Revert 241b1f419f0e ("SUNRPC: Remove xdr_buf_trim()")

[Greg Kroah-Hartman]

From: Chuck Lever <chuck.lever@oracle.com>

commit 0a8e7b7d08466b5fc52f8e96070acc116d82a8bb upstream.

I've noticed that when krb5i or krb5p security is in use,
retransmitted requests are missing the server's duplicate reply
cache. The computed checksum on the retransmitted request does not
match the cached checksum, resulting in the server performing the
retransmitted request again instead of returning the cached reply.

The assumptions made when removing xdr_buf_trim() were not correct.
In the send paths, the upper layer has already set the segment
lengths correctly, and shorting the buffer's content is simply a
matter of reducing buf->len.

xdr_buf_trim() is the right answer in the receive/unwrap path on
both the client and the server. The buffer segment lengths have to
be shortened one-by-one.

On the server side in particular, head.iov_len needs to be updated
correctly to enable nfsd_cache_csum() to work correctly. The simple
buf->len computation doesn't do that, and that results in
checksumming stale data in the buffer.

The problem isn't noticed until there's significant instability of
the RPC transport. At that point, the reliability of retransmit
detection on the server becomes crucial.

Fixes: 241b1f419f0e ("SUNRPC: Remove xdr_buf_trim()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/sunrpc/xdr.h          |    1 
 net/sunrpc/auth_gss/gss_krb5_wrap.c |    7 ++----
 net/sunrpc/auth_gss/svcauth_gss.c   |    2 -
 net/sunrpc/xdr.c                    |   41 ++++++++++++++++++++++++++++++++++++
 4 files changed, 46 insertions(+), 5 deletions(-)

--- a/include/linux/sunrpc/xdr.h
+++ b/include/linux/sunrpc/xdr.h
@@ -186,6 +186,7 @@ xdr_adjust_iovec(struct kvec *iov, __be3
 extern void xdr_shift_buf(struct xdr_buf *, size_t);
 extern void xdr_buf_from_iov(struct kvec *, struct xdr_buf *);
 extern int xdr_buf_subsegment(struct xdr_buf *, struct xdr_buf *, unsigned int, unsigned int);
+extern void xdr_buf_trim(struct xdr_buf *, unsigned int);
 extern int xdr_buf_read_mic(struct xdr_buf *, struct xdr_netobj *, unsigned int);
 extern int read_bytes_from_xdr_buf(struct xdr_buf *, unsigned int, void *, unsigned int);
 extern int write_bytes_to_xdr_buf(struct xdr_buf *, unsigned int, void *, unsigned int);
--- a/net/sunrpc/auth_gss/gss_krb5_wrap.c
+++ b/net/sunrpc/auth_gss/gss_krb5_wrap.c
@@ -580,15 +580,14 @@ gss_unwrap_kerberos_v2(struct krb5_ctx *
 	 */
 	movelen = min_t(unsigned int, buf->head[0].iov_len, len);
 	movelen -= offset + GSS_KRB5_TOK_HDR_LEN + headskip;
-	if (offset + GSS_KRB5_TOK_HDR_LEN + headskip + movelen >
-	    buf->head[0].iov_len)
-		return GSS_S_FAILURE;
+	BUG_ON(offset + GSS_KRB5_TOK_HDR_LEN + headskip + movelen >
+							buf->head[0].iov_len);
 	memmove(ptr, ptr + GSS_KRB5_TOK_HDR_LEN + headskip, movelen);
 	buf->head[0].iov_len -= GSS_KRB5_TOK_HDR_LEN + headskip;
 	buf->len = len - GSS_KRB5_TOK_HDR_LEN + headskip;
 
 	/* Trim off the trailing "extra count" and checksum blob */
-	buf->len -= ec + GSS_KRB5_TOK_HDR_LEN + tailskip;
+	xdr_buf_trim(buf, ec + GSS_KRB5_TOK_HDR_LEN + tailskip);
 
 	*align = XDR_QUADLEN(GSS_KRB5_TOK_HDR_LEN + headskip);
 	*slack = *align + XDR_QUADLEN(ec + GSS_KRB5_TOK_HDR_LEN + tailskip);
--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -897,7 +897,7 @@ unwrap_integ_data(struct svc_rqst *rqstp
 	if (svc_getnl(&buf->head[0]) != seq)
 		goto out;
 	/* trim off the mic and padding at the end before returning */
-	buf->len -= 4 + round_up_to_quad(mic.len);
+	xdr_buf_trim(buf, round_up_to_quad(mic.len) + 4);
 	stat = 0;
 out:
 	kfree(mic.data);
--- a/net/sunrpc/xdr.c
+++ b/net/sunrpc/xdr.c
@@ -1150,6 +1150,47 @@ xdr_buf_subsegment(struct xdr_buf *buf,
 }
 EXPORT_SYMBOL_GPL(xdr_buf_subsegment);
 
+/**
+ * xdr_buf_trim - lop at most "len" bytes off the end of "buf"
+ * @buf: buf to be trimmed
+ * @len: number of bytes to reduce "buf" by
+ *
+ * Trim an xdr_buf by the given number of bytes by fixing up the lengths. Note
+ * that it's possible that we'll trim less than that amount if the xdr_buf is
+ * too small, or if (for instance) it's all in the head and the parser has
+ * already read too far into it.
+ */
+void xdr_buf_trim(struct xdr_buf *buf, unsigned int len)
+{
+	size_t cur;
+	unsigned int trim = len;
+
+	if (buf->tail[0].iov_len) {
+		cur = min_t(size_t, buf->tail[0].iov_len, trim);
+		buf->tail[0].iov_len -= cur;
+		trim -= cur;
+		if (!trim)
+			goto fix_len;
+	}
+
+	if (buf->page_len) {
+		cur = min_t(unsigned int, buf->page_len, trim);
+		buf->page_len -= cur;
+		trim -= cur;
+		if (!trim)
+			goto fix_len;
+	}
+
+	if (buf->head[0].iov_len) {
+		cur = min_t(size_t, buf->head[0].iov_len, trim);
+		buf->head[0].iov_len -= cur;
+		trim -= cur;
+	}
+fix_len:
+	buf->len -= (len - trim);
+}
+EXPORT_SYMBOL_GPL(xdr_buf_trim);
+
 static void __read_bytes_from_xdr_buf(struct xdr_buf *subbuf, void *obj, unsigned int len)
 {
 	unsigned int this_len;

[PATCH 5.4 142/147] bpf: Fix sk_psock refcnt leak when receiving message

[Greg Kroah-Hartman]

From: Xiyu Yang <xiyuyang19@fudan.edu.cn>

commit 18f02ad19e2c2a1d9e1d55a4e1c0cbf51419151c upstream.

tcp_bpf_recvmsg() invokes sk_psock_get(), which returns a reference of
the specified sk_psock object to "psock" with increased refcnt.

When tcp_bpf_recvmsg() returns, local variable "psock" becomes invalid,
so the refcount should be decreased to keep refcount balanced.

The reference counting issue happens in several exception handling paths
of tcp_bpf_recvmsg(). When those error scenarios occur such as "flags"
includes MSG_ERRQUEUE, the function forgets to decrease the refcnt
increased by sk_psock_get(), causing a refcnt leak.

Fix this issue by calling sk_psock_put() or pulling up the error queue
read handling when those error scenarios occur.

Fixes: e7a5f1f1cd000 ("bpf/sockmap: Read psock ingress_msg before sk_receive_queue")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/1587872115-42805-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/ipv4/tcp_bpf.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/net/ipv4/tcp_bpf.c
+++ b/net/ipv4/tcp_bpf.c
@@ -121,14 +121,17 @@ int tcp_bpf_recvmsg(struct sock *sk, str
 	struct sk_psock *psock;
 	int copied, ret;
 
+	if (unlikely(flags & MSG_ERRQUEUE))
+		return inet_recv_error(sk, msg, len, addr_len);
+
 	psock = sk_psock_get(sk);
 	if (unlikely(!psock))
 		return tcp_recvmsg(sk, msg, len, nonblock, flags, addr_len);
-	if (unlikely(flags & MSG_ERRQUEUE))
-		return inet_recv_error(sk, msg, len, addr_len);
 	if (!skb_queue_empty(&sk->sk_receive_queue) &&
-	    sk_psock_queue_empty(psock))
+	    sk_psock_queue_empty(psock)) {
+		sk_psock_put(sk, psock);
 		return tcp_recvmsg(sk, msg, len, nonblock, flags, addr_len);
+	}
 	lock_sock(sk);
 msg_bytes_ready:
 	copied = __tcp_bpf_recvmsg(sk, psock, msg, len, flags);

[PATCH 5.4 143/147] KVM: x86: Fix off-by-one error in kvm_vcpu_ioctl_x86_setup_mce

[Greg Kroah-Hartman]

From: Jim Mattson <jmattson@google.com>

commit c4e0e4ab4cf3ec2b3f0b628ead108d677644ebd9 upstream.

Bank_num is a one-based count of banks, not a zero-based index. It
overflows the allocated space only when strictly greater than
KVM_MAX_MCE_BANKS.

Fixes: a9e38c3e01ad ("KVM: x86: Catch potential overrun in MCE setup")
Signed-off-by: Jue Wang <juew@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20200511225616.19557-1-jmattson@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/x86.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3682,7 +3682,7 @@ static int kvm_vcpu_ioctl_x86_setup_mce(
 	unsigned bank_num = mcg_cap & 0xff, bank;
 
 	r = -EINVAL;
-	if (!bank_num || bank_num >= KVM_MAX_MCE_BANKS)
+	if (!bank_num || bank_num > KVM_MAX_MCE_BANKS)
 		goto out;
 	if (mcg_cap & ~(kvm_mce_cap_supported | 0xff | 0xff0000))
 		goto out;

[PATCH 5.4 144/147] Makefile: disallow data races on gcc-10 as well

[Greg Kroah-Hartman]

From: Sergei Trofimovich <slyfox@gentoo.org>

commit b1112139a103b4b1101d0d2d72931f2d33d8c978 upstream.

gcc-10 will rename --param=allow-store-data-races=0
to -fno-allow-store-data-races.

The flag change happened at https://gcc.gnu.org/PR92046.

Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Thomas Backlund <tmb@mageia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Makefile |    1 +
 1 file changed, 1 insertion(+)

--- a/Makefile
+++ b/Makefile
@@ -709,6 +709,7 @@ endif
 
 # Tell gcc to never replace conditional load with a non-conditional one
 KBUILD_CFLAGS	+= $(call cc-option,--param=allow-store-data-races=0)
+KBUILD_CFLAGS	+= $(call cc-option,-fno-allow-store-data-races)
 
 include scripts/Makefile.kcov
 include scripts/Makefile.gcc-plugins

[PATCH 5.4 145/147] libbpf: Extract and generalize CPU mask parsing logic

[Greg Kroah-Hartman]

From: Andrii Nakryiko <andriin@fb.com>

commit 6803ee25f0ead1e836808acb14396bb9a9849113 upstream.

This logic is re-used for parsing a set of online CPUs. Having it as an
isolated piece of code working with input string makes it conveninent to test
this logic as well. While refactoring, also improve the robustness of original
implementation.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191212013548.1690564-1-andriin@fb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 tools/lib/bpf/libbpf.c          |  128 ++++++++++++++++++++++++++--------------
 tools/lib/bpf/libbpf_internal.h |    2 
 2 files changed, 87 insertions(+), 43 deletions(-)

--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -5905,62 +5905,104 @@ void bpf_program__bpil_offs_to_addr(stru
 	}
 }
 
-int libbpf_num_possible_cpus(void)
+int parse_cpu_mask_str(const char *s, bool **mask, int *mask_sz)
 {
-	static const char *fcpu = "/sys/devices/system/cpu/possible";
-	int len = 0, n = 0, il = 0, ir = 0;
-	unsigned int start = 0, end = 0;
-	int tmp_cpus = 0;
-	static int cpus;
-	char buf[128];
-	int error = 0;
-	int fd = -1;
+	int err = 0, n, len, start, end = -1;
+	bool *tmp;
 
-	tmp_cpus = READ_ONCE(cpus);
-	if (tmp_cpus > 0)
-		return tmp_cpus;
+	*mask = NULL;
+	*mask_sz = 0;
+
+	/* Each sub string separated by ',' has format \d+-\d+ or \d+ */
+	while (*s) {
+		if (*s == ',' || *s == '\n') {
+			s++;
+			continue;
+		}
+		n = sscanf(s, "%d%n-%d%n", &start, &len, &end, &len);
+		if (n <= 0 || n > 2) {
+			pr_warning("Failed to get CPU range %s: %d\n", s, n);
+			err = -EINVAL;
+			goto cleanup;
+		} else if (n == 1) {
+			end = start;
+		}
+		if (start < 0 || start > end) {
+			pr_warning("Invalid CPU range [%d,%d] in %s\n",
+				   start, end, s);
+			err = -EINVAL;
+			goto cleanup;
+		}
+		tmp = realloc(*mask, end + 1);
+		if (!tmp) {
+			err = -ENOMEM;
+			goto cleanup;
+		}
+		*mask = tmp;
+		memset(tmp + *mask_sz, 0, start - *mask_sz);
+		memset(tmp + start, 1, end - start + 1);
+		*mask_sz = end + 1;
+		s += len;
+	}
+	if (!*mask_sz) {
+		pr_warning("Empty CPU range\n");
+		return -EINVAL;
+	}
+	return 0;
+cleanup:
+	free(*mask);
+	*mask = NULL;
+	return err;
+}
+
+int parse_cpu_mask_file(const char *fcpu, bool **mask, int *mask_sz)
+{
+	int fd, err = 0, len;
+	char buf[128];
 
 	fd = open(fcpu, O_RDONLY);
 	if (fd < 0) {
-		error = errno;
-		pr_warning("Failed to open file %s: %s\n",
-			   fcpu, strerror(error));
-		return -error;
+		err = -errno;
+		pr_warning("Failed to open cpu mask file %s: %d\n", fcpu, err);
+		return err;
 	}
 	len = read(fd, buf, sizeof(buf));
 	close(fd);
 	if (len <= 0) {
-		error = len ? errno : EINVAL;
-		pr_warning("Failed to read # of possible cpus from %s: %s\n",
-			   fcpu, strerror(error));
-		return -error;
-	}
-	if (len == sizeof(buf)) {
-		pr_warning("File %s size overflow\n", fcpu);
-		return -EOVERFLOW;
+		err = len ? -errno : -EINVAL;
+		pr_warning("Failed to read cpu mask from %s: %d\n", fcpu, err);
+		return err;
+	}
+	if (len >= sizeof(buf)) {
+		pr_warning("CPU mask is too big in file %s\n", fcpu);
+		return -E2BIG;
 	}
 	buf[len] = '\0';
 
-	for (ir = 0, tmp_cpus = 0; ir <= len; ir++) {
-		/* Each sub string separated by ',' has format \d+-\d+ or \d+ */
-		if (buf[ir] == ',' || buf[ir] == '\0') {
-			buf[ir] = '\0';
-			n = sscanf(&buf[il], "%u-%u", &start, &end);
-			if (n <= 0) {
-				pr_warning("Failed to get # CPUs from %s\n",
-					   &buf[il]);
-				return -EINVAL;
-			} else if (n == 1) {
-				end = start;
-			}
-			tmp_cpus += end - start + 1;
-			il = ir + 1;
-		}
-	}
-	if (tmp_cpus <= 0) {
-		pr_warning("Invalid #CPUs %d from %s\n", tmp_cpus, fcpu);
-		return -EINVAL;
+	return parse_cpu_mask_str(buf, mask, mask_sz);
+}
+
+int libbpf_num_possible_cpus(void)
+{
+	static const char *fcpu = "/sys/devices/system/cpu/possible";
+	static int cpus;
+	int err, n, i, tmp_cpus;
+	bool *mask;
+
+	tmp_cpus = READ_ONCE(cpus);
+	if (tmp_cpus > 0)
+		return tmp_cpus;
+
+	err = parse_cpu_mask_file(fcpu, &mask, &n);
+	if (err)
+		return err;
+
+	tmp_cpus = 0;
+	for (i = 0; i < n; i++) {
+		if (mask[i])
+			tmp_cpus++;
 	}
+	free(mask);
 
 	WRITE_ONCE(cpus, tmp_cpus);
 	return tmp_cpus;
--- a/tools/lib/bpf/libbpf_internal.h
+++ b/tools/lib/bpf/libbpf_internal.h
@@ -63,6 +63,8 @@ do {				\
 #define pr_info(fmt, ...)	__pr(LIBBPF_INFO, fmt, ##__VA_ARGS__)
 #define pr_debug(fmt, ...)	__pr(LIBBPF_DEBUG, fmt, ##__VA_ARGS__)
 
+int parse_cpu_mask_str(const char *s, bool **mask, int *mask_sz);
+int parse_cpu_mask_file(const char *fcpu, bool **mask, int *mask_sz);
 int libbpf__load_raw_btf(const char *raw_types, size_t types_len,
 			 const char *str_sec, size_t str_len);
 

[PATCH 5.4 146/147] selftest/bpf: fix backported test_select_reuseport selftest changes

[Greg Kroah-Hartman]

From: Andrii Nakryiko <andriin@fb.com>

Fix up RET_IF as CHECK macro to make selftests compile again.

Fixes: b911c5e8686a ("selftests: bpf: Reset global state between reuseport test runs")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/testing/selftests/bpf/test_select_reuseport.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/tools/testing/selftests/bpf/test_select_reuseport.c
+++ b/tools/testing/selftests/bpf/test_select_reuseport.c
@@ -668,12 +668,12 @@ static void cleanup_per_test(void)
 
 	for (i = 0; i < NR_RESULTS; i++) {
 		err = bpf_map_update_elem(result_map, &i, &zero, BPF_ANY);
-		RET_IF(err, "reset elem in result_map",
+		CHECK(err, "reset elem in result_map",
 		       "i:%u err:%d errno:%d\n", i, err, errno);
 	}
 
 	err = bpf_map_update_elem(linum_map, &zero, &zero, BPF_ANY);
-	RET_IF(err, "reset line number in linum_map", "err:%d errno:%d\n",
+	CHECK(err, "reset line number in linum_map", "err:%d errno:%d\n",
 	       err, errno);
 
 	for (i = 0; i < REUSEPORT_ARRAY_SIZE; i++)

[PATCH 5.4 147/147] bpf: Test_progs, fix test_get_stack_rawtp_err.c build

[Greg Kroah-Hartman]

From: Kamal Mostafa <kamal@canonical.com>

The linux-5.4.y commit 8781011a302b ("bpf: Test_progs, add test to catch
retval refine error handling") fails to build when libbpf headers are
not installed, as it tries to include <bpf/bpf_helpers.h>:

  progs/test_get_stack_rawtp_err.c:4:10:
      fatal error: 'bpf/bpf_helpers.h' file not found

For 5.4-stable (only) the new test prog needs to include "bpf_helpers.h"
instead (like all the rest of progs/*.c do) because 5.4-stable does not
carry commit e01a75c15969 ("libbpf: Move bpf_{helpers, helper_defs,
endian, tracing}.h into libbpf").

Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Fixes: 8781011a302b ("bpf: Test_progs, add test to catch retval refine error handling")
Cc: <stable@vger.kernel.org> # v5.4
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/testing/selftests/bpf/progs/test_get_stack_rawtp_err.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/testing/selftests/bpf/progs/test_get_stack_rawtp_err.c
+++ b/tools/testing/selftests/bpf/progs/test_get_stack_rawtp_err.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 
 #include <linux/bpf.h>
-#include <bpf/bpf_helpers.h>
+#include "bpf_helpers.h"
 
 #define MAX_STACK_RAWTP 10
 

Re: [PATCH 5.4 000/147] 5.4.42-rc1 review

[Naresh Kamboju]

On Mon, 18 May 2020 at 23:30, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.4.42 release.
> There are 147 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 20 May 2020 17:32:42 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.42-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h


Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

NOTE:

While running ftrace test on arm64 hikey device the following kernel warning
triggered and long with this rcu_preempt self-detected stall on CPU
also noticed.
Please find full test link below,

[ 1313.494714] WARNING: CPU: 0 PID: 458 at
/usr/src/kernel/kernel/trace/ring_buffer.c:2477 rb_commit+0x2c0/0x320
<>
[ 1313.770237] CPU: 0 PID: 458 Comm: avahi-daemon Not tainted 5.4.42-rc1 #1
[ 1313.855515] Hardware name: HiKey Development Board (DT)
[ 1313.939230] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 1314.022148] pc : rb_commit+0x2c0/0x320
[ 1314.104229] lr : ring_buffer_unlock_commit+0x30/0x128

full test log can be found here,
https://qa-reports.linaro.org/lkft/linux-stable-rc-5.4-oe/build/v5.4.41-148-gcac6eb2794c8/testrun/1441704/log


Summary
------------------------------------------------------------------------

kernel: 5.4.42-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.4.y
git commit: cac6eb2794c85e7777fb0caac6fa75b6364d81a0
git describe: v5.4.41-148-gcac6eb2794c8
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.4-oe/build/v5.4.41-148-gcac6eb2794c8


No regressions (compared to build v5.4.41)

No fixes (compared to build v5.4.41)

Ran 33314 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- juno-r2-compat
- juno-r2-kasan
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86
- x86-kasan

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* install-android-platform-tools-r2800
* kselftest
* kselftest/drivers
* kselftest/filesystems
* kselftest/net
* kselftest/networking
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-hugetlb-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-sched-tests
* ltp-syscalls-tests
* perf
* ltp-containers-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-io-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-securebits-tests
* network-basic-tests
* v4l2-compliance
* ltp-open-posix-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-native/drivers
* kselftest-vsyscall-mode-native/filesystems
* kselftest-vsyscall-mode-native/net
* kselftest-vsyscall-mode-native/networking
* kselftest-vsyscall-mode-none
* kselftest-vsyscall-mode-none/drivers
* kselftest-vsyscall-mode-none/filesystems
* kselftest-vsyscall-mode-none/net
* kselftest-vsyscall-mode-none/networking

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.4 000/147] 5.4.42-rc1 review

[Jon Hunter]

On 18/05/2020 18:35, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.42 release.
> There are 147 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 20 May 2020 17:32:42 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.42-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests are passing for Tegra ...

Test results for stable-v5.4:
    13 builds:	13 pass, 0 fail
    26 boots:	26 pass, 0 fail
    42 tests:	42 pass, 0 fail

Linux version:	5.4.42-rc1-gcac6eb2794c8
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra210-p3450-0000,
                tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 5.4 000/147] 5.4.42-rc1 review

[shuah]

On 5/18/20 11:35 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.42 release.
> There are 147 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 20 May 2020 17:32:42 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.42-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 5.4 000/147] 5.4.42-rc1 review

[Guenter Roeck]

On 5/18/20 10:35 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.42 release.
> There are 147 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 20 May 2020 17:32:42 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 157 pass: 157 fail: 0
Qemu test results:
	total: 430 pass: 430 fail: 0

Guenter