* [PATCH 0/3] soundwire: add sysfs support
@ 2020-05-18 20:35 Bard Liao
2020-05-18 20:35 ` [PATCH 1/3] soundwire: disco: s/ch/channels/ Bard Liao
` (3 more replies)
0 siblings, 4 replies; 7+ messages in thread
From: Bard Liao @ 2020-05-18 20:35 UTC (permalink / raw)
To: alsa-devel, vkoul
Cc: vinod.koul, linux-kernel, tiwai, broonie, gregkh, jank,
srinivas.kandagatla, rander.wang, ranjani.sridharan, hui.wang,
pierre-louis.bossart, sanyog.r.kale, slawomir.blauciak,
mengdong.lin, bard.liao
Add soundwire sysfs support.
Pierre-Louis Bossart (3):
soundwire: disco: s/ch/channels/
soundwire: master: add sysfs support
soundwire: add Slave sysfs support
.../ABI/testing/sysfs-bus-soundwire-master | 23 ++
.../ABI/testing/sysfs-bus-soundwire-slave | 91 ++++++
drivers/soundwire/Makefile | 3 +-
drivers/soundwire/bus.c | 1 +
drivers/soundwire/bus.h | 1 +
drivers/soundwire/bus_type.c | 9 +-
drivers/soundwire/master.c | 84 +++++
drivers/soundwire/mipi_disco.c | 11 +-
drivers/soundwire/sysfs_local.h | 14 +
drivers/soundwire/sysfs_slave.c | 215 +++++++++++++
drivers/soundwire/sysfs_slave_dpn.c | 300 ++++++++++++++++++
include/linux/soundwire/sdw.h | 8 +-
12 files changed, 748 insertions(+), 12 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-soundwire-master
create mode 100644 Documentation/ABI/testing/sysfs-bus-soundwire-slave
create mode 100644 drivers/soundwire/sysfs_local.h
create mode 100644 drivers/soundwire/sysfs_slave.c
create mode 100644 drivers/soundwire/sysfs_slave_dpn.c
--
2.17.1
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/3] soundwire: disco: s/ch/channels/
2020-05-18 20:35 [PATCH 0/3] soundwire: add sysfs support Bard Liao
@ 2020-05-18 20:35 ` Bard Liao
2020-05-18 20:35 ` [PATCH 2/3] soundwire: master: add sysfs support Bard Liao
` (2 subsequent siblings)
3 siblings, 0 replies; 7+ messages in thread
From: Bard Liao @ 2020-05-18 20:35 UTC (permalink / raw)
To: alsa-devel, vkoul
Cc: vinod.koul, linux-kernel, tiwai, broonie, gregkh, jank,
srinivas.kandagatla, rander.wang, ranjani.sridharan, hui.wang,
pierre-louis.bossart, sanyog.r.kale, slawomir.blauciak,
mengdong.lin, bard.liao
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Use more meaningful member names in preparation for sysfs support.
No functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
---
drivers/soundwire/mipi_disco.c | 11 ++++++-----
include/linux/soundwire/sdw.h | 8 ++++----
2 files changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/soundwire/mipi_disco.c b/drivers/soundwire/mipi_disco.c
index 844e6b22974f..4ae62b452b8c 100644
--- a/drivers/soundwire/mipi_disco.c
+++ b/drivers/soundwire/mipi_disco.c
@@ -231,16 +231,17 @@ static int sdw_slave_read_dpn(struct sdw_slave *slave,
nval = fwnode_property_count_u32(node, "mipi-sdw-channel-number-list");
if (nval > 0) {
- dpn[i].num_ch = nval;
- dpn[i].ch = devm_kcalloc(&slave->dev, dpn[i].num_ch,
- sizeof(*dpn[i].ch),
+ dpn[i].num_channels = nval;
+ dpn[i].channels = devm_kcalloc(&slave->dev,
+ dpn[i].num_channels,
+ sizeof(*dpn[i].channels),
GFP_KERNEL);
- if (!dpn[i].ch)
+ if (!dpn[i].channels)
return -ENOMEM;
fwnode_property_read_u32_array(node,
"mipi-sdw-channel-number-list",
- dpn[i].ch, dpn[i].num_ch);
+ dpn[i].channels, dpn[i].num_channels);
}
nval = fwnode_property_count_u32(node, "mipi-sdw-channel-combination-list");
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index 7658d9698dd5..9c27a32df9bb 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -291,8 +291,8 @@ struct sdw_dpn_audio_mode {
* implementation-defined interrupts
* @max_ch: Maximum channels supported
* @min_ch: Minimum channels supported
- * @num_ch: Number of discrete channels supported
- * @ch: Discrete channels supported
+ * @num_channels: Number of discrete channels supported
+ * @channels: Discrete channels supported
* @num_ch_combinations: Number of channel combinations supported
* @ch_combinations: Channel combinations supported
* @modes: SDW mode supported
@@ -316,8 +316,8 @@ struct sdw_dpn_prop {
u32 imp_def_interrupts;
u32 max_ch;
u32 min_ch;
- u32 num_ch;
- u32 *ch;
+ u32 num_channels;
+ u32 *channels;
u32 num_ch_combinations;
u32 *ch_combinations;
u32 modes;
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 2/3] soundwire: master: add sysfs support
2020-05-18 20:35 [PATCH 0/3] soundwire: add sysfs support Bard Liao
2020-05-18 20:35 ` [PATCH 1/3] soundwire: disco: s/ch/channels/ Bard Liao
@ 2020-05-18 20:35 ` Bard Liao
2020-05-18 20:35 ` [PATCH 3/3] soundwire: add Slave " Bard Liao
2020-05-20 12:00 ` [PATCH 0/3] soundwire: add " Vinod Koul
3 siblings, 0 replies; 7+ messages in thread
From: Bard Liao @ 2020-05-18 20:35 UTC (permalink / raw)
To: alsa-devel, vkoul
Cc: vinod.koul, linux-kernel, tiwai, broonie, gregkh, jank,
srinivas.kandagatla, rander.wang, ranjani.sridharan, hui.wang,
pierre-louis.bossart, sanyog.r.kale, slawomir.blauciak,
mengdong.lin, bard.liao
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Add the master properties as attributes. The description is directly
derived from the MIPI DisCo specification.
Credits: this patch is based on an earlier internal contribution by
Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
---
.../ABI/testing/sysfs-bus-soundwire-master | 23 +++++
drivers/soundwire/master.c | 84 +++++++++++++++++++
2 files changed, 107 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-soundwire-master
diff --git a/Documentation/ABI/testing/sysfs-bus-soundwire-master b/Documentation/ABI/testing/sysfs-bus-soundwire-master
new file mode 100644
index 000000000000..46ef038d8722
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-soundwire-master
@@ -0,0 +1,23 @@
+What: /sys/bus/soundwire/devices/sdw-master-N/revision
+ /sys/bus/soundwire/devices/sdw-master-N/clk_stop_modes
+ /sys/bus/soundwire/devices/sdw-master-N/clk_freq
+ /sys/bus/soundwire/devices/sdw-master-N/clk_gears
+ /sys/bus/soundwire/devices/sdw-master-N/default_col
+ /sys/bus/soundwire/devices/sdw-master-N/default_frame_rate
+ /sys/bus/soundwire/devices/sdw-master-N/default_row
+ /sys/bus/soundwire/devices/sdw-master-N/dynamic_shape
+ /sys/bus/soundwire/devices/sdw-master-N/err_threshold
+ /sys/bus/soundwire/devices/sdw-master-N/max_clk_freq
+
+Date: April 2020
+
+Contact: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
+ Bard Liao <yung-chuan.liao@linux.intel.com>
+ Vinod Koul <vkoul@kernel.org>
+
+Description: SoundWire Master-N DisCo properties.
+ These properties are defined by MIPI DisCo Specification
+ for SoundWire. They define various properties of the Master
+ and are used by the bus to configure the Master. clk_stop_modes
+ is a bitmask for simplifications and combines the
+ clock-stop-mode0 and clock-stop-mode1 properties.
diff --git a/drivers/soundwire/master.c b/drivers/soundwire/master.c
index 5411791e6aff..5f0b2189defe 100644
--- a/drivers/soundwire/master.c
+++ b/drivers/soundwire/master.c
@@ -8,6 +8,89 @@
#include <linux/soundwire/sdw_type.h>
#include "bus.h"
+/*
+ * The sysfs for properties reflects the MIPI description as given
+ * in the MIPI DisCo spec
+ *
+ * Base file is:
+ * sdw-master-N
+ * |---- revision
+ * |---- clk_stop_modes
+ * |---- max_clk_freq
+ * |---- clk_freq
+ * |---- clk_gears
+ * |---- default_row
+ * |---- default_col
+ * |---- dynamic_shape
+ * |---- err_threshold
+ */
+
+#define sdw_master_attr(field, format_string) \
+static ssize_t field##_show(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct sdw_master_device *md = dev_to_sdw_master_device(dev); \
+ return sprintf(buf, format_string, md->bus->prop.field); \
+} \
+static DEVICE_ATTR_RO(field)
+
+sdw_master_attr(revision, "0x%x\n");
+sdw_master_attr(clk_stop_modes, "0x%x\n");
+sdw_master_attr(max_clk_freq, "%d\n");
+sdw_master_attr(default_row, "%d\n");
+sdw_master_attr(default_col, "%d\n");
+sdw_master_attr(default_frame_rate, "%d\n");
+sdw_master_attr(dynamic_frame, "%d\n");
+sdw_master_attr(err_threshold, "%d\n");
+
+static ssize_t clock_frequencies_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct sdw_master_device *md = dev_to_sdw_master_device(dev);
+ ssize_t size = 0;
+ int i;
+
+ for (i = 0; i < md->bus->prop.num_clk_freq; i++)
+ size += sprintf(buf + size, "%8d ",
+ md->bus->prop.clk_freq[i]);
+ size += sprintf(buf + size, "\n");
+
+ return size;
+}
+static DEVICE_ATTR_RO(clock_frequencies);
+
+static ssize_t clock_gears_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct sdw_master_device *md = dev_to_sdw_master_device(dev);
+ ssize_t size = 0;
+ int i;
+
+ for (i = 0; i < md->bus->prop.num_clk_gears; i++)
+ size += sprintf(buf + size, "%8d ",
+ md->bus->prop.clk_gears[i]);
+ size += sprintf(buf + size, "\n");
+
+ return size;
+}
+static DEVICE_ATTR_RO(clock_gears);
+
+static struct attribute *master_node_attrs[] = {
+ &dev_attr_revision.attr,
+ &dev_attr_clk_stop_modes.attr,
+ &dev_attr_max_clk_freq.attr,
+ &dev_attr_default_row.attr,
+ &dev_attr_default_col.attr,
+ &dev_attr_default_frame_rate.attr,
+ &dev_attr_dynamic_frame.attr,
+ &dev_attr_err_threshold.attr,
+ &dev_attr_clock_frequencies.attr,
+ &dev_attr_clock_gears.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(master_node);
+
static void sdw_master_device_release(struct device *dev)
{
struct sdw_master_device *md = dev_to_sdw_master_device(dev);
@@ -48,6 +131,7 @@ int sdw_master_device_add(struct sdw_bus *bus, struct device *parent,
md->dev.bus = &sdw_bus_type;
md->dev.type = &sdw_master_type;
md->dev.parent = parent;
+ md->dev.groups = master_node_groups;
md->dev.of_node = parent->of_node;
md->dev.fwnode = fwnode;
md->dev.dma_mask = parent->dma_mask;
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 3/3] soundwire: add Slave sysfs support
2020-05-18 20:35 [PATCH 0/3] soundwire: add sysfs support Bard Liao
2020-05-18 20:35 ` [PATCH 1/3] soundwire: disco: s/ch/channels/ Bard Liao
2020-05-18 20:35 ` [PATCH 2/3] soundwire: master: add sysfs support Bard Liao
@ 2020-05-18 20:35 ` Bard Liao
2020-05-19 14:10 ` Greg KH
2020-05-20 11:57 ` Vinod Koul
2020-05-20 12:00 ` [PATCH 0/3] soundwire: add " Vinod Koul
3 siblings, 2 replies; 7+ messages in thread
From: Bard Liao @ 2020-05-18 20:35 UTC (permalink / raw)
To: alsa-devel, vkoul
Cc: vinod.koul, linux-kernel, tiwai, broonie, gregkh, jank,
srinivas.kandagatla, rander.wang, ranjani.sridharan, hui.wang,
pierre-louis.bossart, sanyog.r.kale, slawomir.blauciak,
mengdong.lin, bard.liao
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Expose MIPI DisCo Slave properties in sysfs.
For Slave properties and Data Port 0, the attributes are managed with
simple devm_ support.
A Slave Device may have more than one Data Port (DPN), and each Data
Port can be sink or source. The attributes are created dynamically
using pre-canned macros, but still use devm_ with a name attribute
group to avoid creating kobjects - as requested by GregKH. In the
_show function, we use container_of() to retrieve port number and
direction required to extract the information.
Audio modes are not supported for now. Depending on the discussions
the SoundWire Device Class, we may add it later as is or follow the
new specification.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
---
.../ABI/testing/sysfs-bus-soundwire-slave | 91 ++++++
drivers/soundwire/Makefile | 3 +-
drivers/soundwire/bus.c | 1 +
drivers/soundwire/bus.h | 1 +
drivers/soundwire/bus_type.c | 9 +-
drivers/soundwire/sysfs_local.h | 14 +
drivers/soundwire/sysfs_slave.c | 215 +++++++++++++
drivers/soundwire/sysfs_slave_dpn.c | 300 ++++++++++++++++++
8 files changed, 631 insertions(+), 3 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-soundwire-slave
create mode 100644 drivers/soundwire/sysfs_local.h
create mode 100644 drivers/soundwire/sysfs_slave.c
create mode 100644 drivers/soundwire/sysfs_slave_dpn.c
diff --git a/Documentation/ABI/testing/sysfs-bus-soundwire-slave b/Documentation/ABI/testing/sysfs-bus-soundwire-slave
new file mode 100644
index 000000000000..db4c9511d1aa
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-soundwire-slave
@@ -0,0 +1,91 @@
+What: /sys/bus/soundwire/devices/sdw:.../dev-properties/mipi_revision
+ /sys/bus/soundwire/devices/sdw:.../dev-properties/wake_capable
+ /sys/bus/soundwire/devices/sdw:.../dev-properties/test_mode_capable
+ /sys/bus/soundwire/devices/sdw:.../dev-properties/clk_stop_mode1
+ /sys/bus/soundwire/devices/sdw:.../dev-properties/simple_clk_stop_capable
+ /sys/bus/soundwire/devices/sdw:.../dev-properties/clk_stop_timeout
+ /sys/bus/soundwire/devices/sdw:.../dev-properties/ch_prep_timeout
+ /sys/bus/soundwire/devices/sdw:.../dev-properties/reset_behave
+ /sys/bus/soundwire/devices/sdw:.../dev-properties/high_PHY_capable
+ /sys/bus/soundwire/devices/sdw:.../dev-properties/paging_support
+ /sys/bus/soundwire/devices/sdw:.../dev-properties/bank_delay_support
+ /sys/bus/soundwire/devices/sdw:.../dev-properties/p15_behave
+ /sys/bus/soundwire/devices/sdw:.../dev-properties/master_count
+ /sys/bus/soundwire/devices/sdw:.../dev-properties/source_ports
+ /sys/bus/soundwire/devices/sdw:.../dev-properties/sink_ports
+
+Date: May 2020
+
+Contact: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
+ Bard Liao <yung-chuan.liao@linux.intel.com>
+ Vinod Koul <vkoul@kernel.org>
+
+Description: SoundWire Slave DisCo properties.
+ These properties are defined by MIPI DisCo Specification
+ for SoundWire. They define various properties of the
+ SoundWire Slave and are used by the bus to configure
+ the Slave
+
+
+What: /sys/bus/soundwire/devices/sdw:.../dp0/max_word
+ /sys/bus/soundwire/devices/sdw:.../dp0/min_word
+ /sys/bus/soundwire/devices/sdw:.../dp0/words
+ /sys/bus/soundwire/devices/sdw:.../dp0/BRA_flow_controlled
+ /sys/bus/soundwire/devices/sdw:.../dp0/simple_ch_prep_sm
+ /sys/bus/soundwire/devices/sdw:.../dp0/imp_def_interrupts
+
+Date: May 2020
+
+Contact: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
+ Bard Liao <yung-chuan.liao@linux.intel.com>
+ Vinod Koul <vkoul@kernel.org>
+
+Description: SoundWire Slave Data Port-0 DisCo properties.
+ These properties are defined by MIPI DisCo Specification
+ for the SoundWire. They define various properties of the
+ Data port 0 are used by the bus to configure the Data Port 0.
+
+
+What: /sys/bus/soundwire/devices/sdw:.../dpN_src/max_word
+ /sys/bus/soundwire/devices/sdw:.../dpN_src/min_word
+ /sys/bus/soundwire/devices/sdw:.../dpN_src/words
+ /sys/bus/soundwire/devices/sdw:.../dpN_src/type
+ /sys/bus/soundwire/devices/sdw:.../dpN_src/max_grouping
+ /sys/bus/soundwire/devices/sdw:.../dpN_src/simple_ch_prep_sm
+ /sys/bus/soundwire/devices/sdw:.../dpN_src/ch_prep_timeout
+ /sys/bus/soundwire/devices/sdw:.../dpN_src/imp_def_interrupts
+ /sys/bus/soundwire/devices/sdw:.../dpN_src/min_ch
+ /sys/bus/soundwire/devices/sdw:.../dpN_src/max_ch
+ /sys/bus/soundwire/devices/sdw:.../dpN_src/channels
+ /sys/bus/soundwire/devices/sdw:.../dpN_src/ch_combinations
+ /sys/bus/soundwire/devices/sdw:.../dpN_src/max_async_buffer
+ /sys/bus/soundwire/devices/sdw:.../dpN_src/block_pack_mode
+ /sys/bus/soundwire/devices/sdw:.../dpN_src/port_encoding
+
+ /sys/bus/soundwire/devices/sdw:.../dpN_sink/max_word
+ /sys/bus/soundwire/devices/sdw:.../dpN_sink/min_word
+ /sys/bus/soundwire/devices/sdw:.../dpN_sink/words
+ /sys/bus/soundwire/devices/sdw:.../dpN_sink/type
+ /sys/bus/soundwire/devices/sdw:.../dpN_sink/max_grouping
+ /sys/bus/soundwire/devices/sdw:.../dpN_sink/simple_ch_prep_sm
+ /sys/bus/soundwire/devices/sdw:.../dpN_sink/ch_prep_timeout
+ /sys/bus/soundwire/devices/sdw:.../dpN_sink/imp_def_interrupts
+ /sys/bus/soundwire/devices/sdw:.../dpN_sink/min_ch
+ /sys/bus/soundwire/devices/sdw:.../dpN_sink/max_ch
+ /sys/bus/soundwire/devices/sdw:.../dpN_sink/channels
+ /sys/bus/soundwire/devices/sdw:.../dpN_sink/ch_combinations
+ /sys/bus/soundwire/devices/sdw:.../dpN_sink/max_async_buffer
+ /sys/bus/soundwire/devices/sdw:.../dpN_sink/block_pack_mode
+ /sys/bus/soundwire/devices/sdw:.../dpN_sink/port_encoding
+
+Date: May 2020
+
+Contact: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
+ Bard Liao <yung-chuan.liao@linux.intel.com>
+ Vinod Koul <vkoul@kernel.org>
+
+Description: SoundWire Slave Data Source/Sink Port-N DisCo properties.
+ These properties are defined by MIPI DisCo Specification
+ for SoundWire. They define various properties of the
+ Source/Sink Data port N and are used by the bus to configure
+ the Data Port N.
diff --git a/drivers/soundwire/Makefile b/drivers/soundwire/Makefile
index 7319918e0aec..9b0aeee94876 100644
--- a/drivers/soundwire/Makefile
+++ b/drivers/soundwire/Makefile
@@ -4,7 +4,8 @@
#
#Bus Objs
-soundwire-bus-objs := bus_type.o bus.o master.o slave.o mipi_disco.o stream.o
+soundwire-bus-objs := bus_type.o bus.o master.o slave.o mipi_disco.o stream.o \
+ sysfs_slave.o sysfs_slave_dpn.o
obj-$(CONFIG_SOUNDWIRE) += soundwire-bus.o
ifdef CONFIG_DEBUG_FS
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
index 11cfe435e4a8..24ba77226376 100644
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -8,6 +8,7 @@
#include <linux/soundwire/sdw_registers.h>
#include <linux/soundwire/sdw.h>
#include "bus.h"
+#include "sysfs_local.h"
static DEFINE_IDA(sdw_ida);
diff --git a/drivers/soundwire/bus.h b/drivers/soundwire/bus.h
index 93ab0234a491..82484f741168 100644
--- a/drivers/soundwire/bus.h
+++ b/drivers/soundwire/bus.h
@@ -175,5 +175,6 @@ sdw_update(struct sdw_slave *slave, u32 addr, u8 mask, u8 val)
#define SDW_UNATTACH_REQUEST_MASTER_RESET BIT(0)
void sdw_clear_slave_status(struct sdw_bus *bus, u32 request);
+int sdw_slave_modalias(const struct sdw_slave *slave, char *buf, size_t size);
#endif /* __SDW_BUS_H */
diff --git a/drivers/soundwire/bus_type.c b/drivers/soundwire/bus_type.c
index 2c1a19caba51..de9a671802b8 100644
--- a/drivers/soundwire/bus_type.c
+++ b/drivers/soundwire/bus_type.c
@@ -7,6 +7,7 @@
#include <linux/soundwire/sdw.h>
#include <linux/soundwire/sdw_type.h>
#include "bus.h"
+#include "sysfs_local.h"
/**
* sdw_get_device_id - find the matching SoundWire device id
@@ -46,8 +47,7 @@ static int sdw_bus_match(struct device *dev, struct device_driver *ddrv)
return ret;
}
-static int sdw_slave_modalias(const struct sdw_slave *slave, char *buf,
- size_t size)
+int sdw_slave_modalias(const struct sdw_slave *slave, char *buf, size_t size)
{
/* modalias is sdw:m<mfg_id>p<part_id> */
@@ -105,6 +105,11 @@ static int sdw_drv_probe(struct device *dev)
if (slave->ops && slave->ops->read_prop)
slave->ops->read_prop(slave);
+ /* init the sysfs as we have properties now */
+ ret = sdw_slave_sysfs_init(slave);
+ if (ret < 0)
+ dev_warn(dev, "Slave sysfs init failed:%d\n", ret);
+
/*
* Check for valid clk_stop_timeout, use DisCo worst case value of
* 300ms
diff --git a/drivers/soundwire/sysfs_local.h b/drivers/soundwire/sysfs_local.h
new file mode 100644
index 000000000000..ff60adee3c41
--- /dev/null
+++ b/drivers/soundwire/sysfs_local.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright(c) 2015-2020 Intel Corporation. */
+
+#ifndef __SDW_SYSFS_LOCAL_H
+#define __SDW_SYSFS_LOCAL_H
+
+/*
+ * SDW sysfs APIs -
+ */
+
+int sdw_slave_sysfs_init(struct sdw_slave *slave);
+int sdw_slave_sysfs_dpn_init(struct sdw_slave *slave);
+
+#endif /* __SDW_SYSFS_LOCAL_H */
diff --git a/drivers/soundwire/sysfs_slave.c b/drivers/soundwire/sysfs_slave.c
new file mode 100644
index 000000000000..ae6d241eca50
--- /dev/null
+++ b/drivers/soundwire/sysfs_slave.c
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright(c) 2015-2020 Intel Corporation.
+
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/soundwire/sdw.h>
+#include <linux/soundwire/sdw_type.h>
+#include "bus.h"
+#include "sysfs_local.h"
+
+/*
+ * Slave sysfs
+ */
+
+/*
+ * The sysfs for Slave reflects the MIPI description as given
+ * in the MIPI DisCo spec
+ *
+ * Base file is device
+ * |---- modalias
+ * |---- dev-properties
+ * |---- mipi_revision
+ * |---- wake_capable
+ * |---- test_mode_capable
+ * |---- clk_stop_mode1
+ * |---- simple_clk_stop_capable
+ * |---- clk_stop_timeout
+ * |---- ch_prep_timeout
+ * |---- reset_behave
+ * |---- high_PHY_capable
+ * |---- paging_support
+ * |---- bank_delay_support
+ * |---- p15_behave
+ * |---- master_count
+ * |---- source_ports
+ * |---- sink_ports
+ * |---- dp0
+ * |---- max_word
+ * |---- min_word
+ * |---- words
+ * |---- BRA_flow_controlled
+ * |---- simple_ch_prep_sm
+ * |---- imp_def_interrupts
+ * |---- dpN_<sink/src>
+ * |---- max_word
+ * |---- min_word
+ * |---- words
+ * |---- type
+ * |---- max_grouping
+ * |---- simple_ch_prep_sm
+ * |---- ch_prep_timeout
+ * |---- imp_def_interrupts
+ * |---- min_ch
+ * |---- max_ch
+ * |---- channels
+ * |---- ch_combinations
+ * |---- max_async_buffer
+ * |---- block_pack_mode
+ * |---- port_encoding
+ *
+ */
+
+#define sdw_slave_attr(field, format_string) \
+static ssize_t field##_show(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct sdw_slave *slave = dev_to_sdw_dev(dev); \
+ return sprintf(buf, format_string, slave->prop.field); \
+} \
+static DEVICE_ATTR_RO(field)
+
+sdw_slave_attr(mipi_revision, "0x%x\n");
+sdw_slave_attr(wake_capable, "%d\n");
+sdw_slave_attr(test_mode_capable, "%d\n");
+sdw_slave_attr(clk_stop_mode1, "%d\n");
+sdw_slave_attr(simple_clk_stop_capable, "%d\n");
+sdw_slave_attr(clk_stop_timeout, "%d\n");
+sdw_slave_attr(ch_prep_timeout, "%d\n");
+sdw_slave_attr(reset_behave, "%d\n");
+sdw_slave_attr(high_PHY_capable, "%d\n");
+sdw_slave_attr(paging_support, "%d\n");
+sdw_slave_attr(bank_delay_support, "%d\n");
+sdw_slave_attr(p15_behave, "%d\n");
+sdw_slave_attr(master_count, "%d\n");
+sdw_slave_attr(source_ports, "0x%x\n");
+sdw_slave_attr(sink_ports, "0x%x\n");
+
+static ssize_t modalias_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct sdw_slave *slave = dev_to_sdw_dev(dev);
+
+ return sdw_slave_modalias(slave, buf, 256);
+}
+static DEVICE_ATTR_RO(modalias);
+
+static struct attribute *slave_attrs[] = {
+ &dev_attr_modalias.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(slave);
+
+static struct attribute *slave_dev_attrs[] = {
+ &dev_attr_mipi_revision.attr,
+ &dev_attr_wake_capable.attr,
+ &dev_attr_test_mode_capable.attr,
+ &dev_attr_clk_stop_mode1.attr,
+ &dev_attr_simple_clk_stop_capable.attr,
+ &dev_attr_clk_stop_timeout.attr,
+ &dev_attr_ch_prep_timeout.attr,
+ &dev_attr_reset_behave.attr,
+ &dev_attr_high_PHY_capable.attr,
+ &dev_attr_paging_support.attr,
+ &dev_attr_bank_delay_support.attr,
+ &dev_attr_p15_behave.attr,
+ &dev_attr_master_count.attr,
+ &dev_attr_source_ports.attr,
+ &dev_attr_sink_ports.attr,
+ NULL,
+};
+
+/*
+ * we don't use ATTRIBUTES_GROUP here since we want to add a subdirectory
+ * for device-level properties
+ */
+static struct attribute_group sdw_slave_dev_attr_group = {
+ .attrs = slave_dev_attrs,
+ .name = "dev-properties",
+};
+
+/*
+ * DP0 sysfs
+ */
+
+#define sdw_dp0_attr(field, format_string) \
+static ssize_t field##_show(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct sdw_slave *slave = dev_to_sdw_dev(dev); \
+ return sprintf(buf, format_string, slave->prop.dp0_prop->field);\
+} \
+static DEVICE_ATTR_RO(field)
+
+sdw_dp0_attr(max_word, "%d\n");
+sdw_dp0_attr(min_word, "%d\n");
+sdw_dp0_attr(BRA_flow_controlled, "%d\n");
+sdw_dp0_attr(simple_ch_prep_sm, "%d\n");
+sdw_dp0_attr(imp_def_interrupts, "0x%x\n");
+
+static ssize_t words_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct sdw_slave *slave = dev_to_sdw_dev(dev);
+ ssize_t size = 0;
+ int i;
+
+ for (i = 0; i < slave->prop.dp0_prop->num_words; i++)
+ size += sprintf(buf + size, "%d ",
+ slave->prop.dp0_prop->words[i]);
+ size += sprintf(buf + size, "\n");
+
+ return size;
+}
+static DEVICE_ATTR_RO(words);
+
+static struct attribute *dp0_attrs[] = {
+ &dev_attr_max_word.attr,
+ &dev_attr_min_word.attr,
+ &dev_attr_words.attr,
+ &dev_attr_BRA_flow_controlled.attr,
+ &dev_attr_simple_ch_prep_sm.attr,
+ &dev_attr_imp_def_interrupts.attr,
+ NULL,
+};
+
+/*
+ * we don't use ATTRIBUTES_GROUP here since we want to add a subdirectory
+ * for dp0-level properties
+ */
+static const struct attribute_group dp0_group = {
+ .attrs = dp0_attrs,
+ .name = "dp0",
+};
+
+int sdw_slave_sysfs_init(struct sdw_slave *slave)
+{
+ int ret;
+
+ ret = devm_device_add_groups(&slave->dev, slave_groups);
+ if (ret < 0)
+ return ret;
+
+ ret = devm_device_add_group(&slave->dev, &sdw_slave_dev_attr_group);
+ if (ret < 0)
+ return ret;
+
+ if (slave->prop.dp0_prop) {
+ ret = devm_device_add_group(&slave->dev, &dp0_group);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (slave->prop.source_ports || slave->prop.sink_ports) {
+ ret = sdw_slave_sysfs_dpn_init(slave);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
diff --git a/drivers/soundwire/sysfs_slave_dpn.c b/drivers/soundwire/sysfs_slave_dpn.c
new file mode 100644
index 000000000000..c175a7d08815
--- /dev/null
+++ b/drivers/soundwire/sysfs_slave_dpn.c
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright(c) 2015-2020 Intel Corporation.
+
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/soundwire/sdw.h>
+#include <linux/soundwire/sdw_type.h>
+#include "bus.h"
+#include "sysfs_local.h"
+
+struct dpn_attribute {
+ struct device_attribute dev_attr;
+ int N;
+ int dir;
+ const char *format_string;
+};
+
+/*
+ * Since we can't use ARRAY_SIZE, hard-code number of dpN attributes.
+ * This needs to be updated when adding new attributes - an error will be
+ * flagged on a mismatch.
+ */
+#define SDW_DPN_ATTRIBUTES 15
+
+#define sdw_dpn_attribute_alloc(field) \
+static int field##_attribute_alloc(struct device *dev, \
+ struct attribute **res, \
+ int N, int dir, \
+ const char *format_string) \
+{ \
+ struct dpn_attribute *dpn_attr; \
+ \
+ dpn_attr = devm_kzalloc(dev, sizeof(*dpn_attr), GFP_KERNEL); \
+ if (!dpn_attr) \
+ return -ENOMEM; \
+ dpn_attr->N = N; \
+ dpn_attr->dir = dir; \
+ dpn_attr->format_string = format_string; \
+ dpn_attr->dev_attr.attr.name = __stringify(field); \
+ dpn_attr->dev_attr.attr.mode = 0444; \
+ dpn_attr->dev_attr.show = field##_show; \
+ \
+ *res = &dpn_attr->dev_attr.attr; \
+ \
+ return 0; \
+}
+
+#define sdw_dpn_attr(field) \
+ \
+static ssize_t field##_dpn_show(struct sdw_slave *slave, \
+ int N, \
+ int dir, \
+ const char *format_string, \
+ char *buf) \
+{ \
+ struct sdw_dpn_prop *dpn; \
+ unsigned long mask; \
+ int bit; \
+ int i; \
+ \
+ if (dir) { \
+ dpn = slave->prop.src_dpn_prop; \
+ mask = slave->prop.source_ports; \
+ } else { \
+ dpn = slave->prop.sink_dpn_prop; \
+ mask = slave->prop.sink_ports; \
+ } \
+ \
+ i = 0; \
+ for_each_set_bit(bit, &mask, 32) { \
+ if (bit == N) { \
+ return sprintf(buf, format_string, \
+ dpn[i].field); \
+ } \
+ i++; \
+ } \
+ return -EINVAL; \
+} \
+ \
+static ssize_t field##_show(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct sdw_slave *slave = dev_to_sdw_dev(dev); \
+ struct dpn_attribute *dpn_attr = \
+ container_of(attr, struct dpn_attribute, dev_attr); \
+ \
+ return field##_dpn_show(slave, \
+ dpn_attr->N, dpn_attr->dir, \
+ dpn_attr->format_string, \
+ buf); \
+} \
+sdw_dpn_attribute_alloc(field)
+
+sdw_dpn_attr(imp_def_interrupts);
+sdw_dpn_attr(max_word);
+sdw_dpn_attr(min_word);
+sdw_dpn_attr(type);
+sdw_dpn_attr(max_grouping);
+sdw_dpn_attr(simple_ch_prep_sm);
+sdw_dpn_attr(ch_prep_timeout);
+sdw_dpn_attr(max_ch);
+sdw_dpn_attr(min_ch);
+sdw_dpn_attr(max_async_buffer);
+sdw_dpn_attr(block_pack_mode);
+sdw_dpn_attr(port_encoding);
+
+#define sdw_dpn_array_attr(field) \
+ \
+static ssize_t field##_dpn_show(struct sdw_slave *slave, \
+ int N, \
+ int dir, \
+ const char *format_string, \
+ char *buf) \
+{ \
+ struct sdw_dpn_prop *dpn; \
+ unsigned long mask; \
+ ssize_t size = 0; \
+ int bit; \
+ int i; \
+ int j; \
+ \
+ if (dir) { \
+ dpn = slave->prop.src_dpn_prop; \
+ mask = slave->prop.source_ports; \
+ } else { \
+ dpn = slave->prop.sink_dpn_prop; \
+ mask = slave->prop.sink_ports; \
+ } \
+ \
+ i = 0; \
+ for_each_set_bit(bit, &mask, 32) { \
+ if (bit == N) { \
+ for (j = 0; j < dpn[i].num_##field; j++) \
+ size += sprintf(buf + size, \
+ format_string, \
+ dpn[i].field[j]); \
+ size += sprintf(buf + size, "\n"); \
+ return size; \
+ } \
+ i++; \
+ } \
+ return -EINVAL; \
+} \
+static ssize_t field##_show(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct sdw_slave *slave = dev_to_sdw_dev(dev); \
+ struct dpn_attribute *dpn_attr = \
+ container_of(attr, struct dpn_attribute, dev_attr); \
+ \
+ return field##_dpn_show(slave, \
+ dpn_attr->N, dpn_attr->dir, \
+ dpn_attr->format_string, \
+ buf); \
+} \
+sdw_dpn_attribute_alloc(field)
+
+sdw_dpn_array_attr(words);
+sdw_dpn_array_attr(ch_combinations);
+sdw_dpn_array_attr(channels);
+
+static int add_all_attributes(struct device *dev, int N, int dir)
+{
+ struct attribute **dpn_attrs;
+ struct attribute_group *dpn_group;
+ int i = 0;
+ int ret;
+
+ /* allocate attributes, last one is NULL */
+ dpn_attrs = devm_kcalloc(dev, SDW_DPN_ATTRIBUTES + 1,
+ sizeof(struct attribute *),
+ GFP_KERNEL);
+ if (!dpn_attrs)
+ return -ENOMEM;
+
+ ret = max_word_attribute_alloc(dev, &dpn_attrs[i++],
+ N, dir, "%d\n");
+ if (ret < 0)
+ return ret;
+
+ ret = min_word_attribute_alloc(dev, &dpn_attrs[i++],
+ N, dir, "%d\n");
+ if (ret < 0)
+ return ret;
+
+ ret = words_attribute_alloc(dev, &dpn_attrs[i++],
+ N, dir, "%d\n");
+ if (ret < 0)
+ return ret;
+
+ ret = type_attribute_alloc(dev, &dpn_attrs[i++],
+ N, dir, "%d\n");
+ if (ret < 0)
+ return ret;
+
+ ret = max_grouping_attribute_alloc(dev, &dpn_attrs[i++],
+ N, dir, "%d\n");
+ if (ret < 0)
+ return ret;
+
+ ret = simple_ch_prep_sm_attribute_alloc(dev, &dpn_attrs[i++],
+ N, dir, "%d\n");
+ if (ret < 0)
+ return ret;
+
+ ret = ch_prep_timeout_attribute_alloc(dev, &dpn_attrs[i++],
+ N, dir, "%d\n");
+ if (ret < 0)
+ return ret;
+
+ ret = imp_def_interrupts_attribute_alloc(dev, &dpn_attrs[i++],
+ N, dir, "0x%x\n");
+ if (ret < 0)
+ return ret;
+
+ ret = min_ch_attribute_alloc(dev, &dpn_attrs[i++],
+ N, dir, "%d\n");
+ if (ret < 0)
+ return ret;
+
+ ret = max_ch_attribute_alloc(dev, &dpn_attrs[i++],
+ N, dir, "%d\n");
+ if (ret < 0)
+ return ret;
+
+ ret = channels_attribute_alloc(dev, &dpn_attrs[i++],
+ N, dir, "%d\n");
+ if (ret < 0)
+ return ret;
+
+ ret = ch_combinations_attribute_alloc(dev, &dpn_attrs[i++],
+ N, dir, "%d\n");
+ if (ret < 0)
+ return ret;
+
+ ret = max_async_buffer_attribute_alloc(dev, &dpn_attrs[i++],
+ N, dir, "%d\n");
+ if (ret < 0)
+ return ret;
+
+ ret = block_pack_mode_attribute_alloc(dev, &dpn_attrs[i++],
+ N, dir, "%d\n");
+ if (ret < 0)
+ return ret;
+
+ ret = port_encoding_attribute_alloc(dev, &dpn_attrs[i++],
+ N, dir, "%d\n");
+ if (ret < 0)
+ return ret;
+
+ /* paranioa check for editing mistakes */
+ if (i != SDW_DPN_ATTRIBUTES) {
+ dev_err(dev, "mismatch in attributes, allocated %d got %d\n",
+ SDW_DPN_ATTRIBUTES, i);
+ return -EINVAL;
+ }
+
+ dpn_group = devm_kzalloc(dev, sizeof(*dpn_group), GFP_KERNEL);
+ if (!dpn_group)
+ return -ENOMEM;
+
+ dpn_group->attrs = dpn_attrs;
+ dpn_group->name = devm_kasprintf(dev, GFP_KERNEL, "dp%d_%s",
+ N, dir ? "src" : "sink");
+ if (!dpn_group->name)
+ return -ENOMEM;
+
+ ret = devm_device_add_group(dev, dpn_group);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int sdw_slave_sysfs_dpn_init(struct sdw_slave *slave)
+{
+ unsigned long mask;
+ int ret;
+ int i;
+
+ mask = slave->prop.source_ports;
+ for_each_set_bit(i, &mask, 32) {
+ ret = add_all_attributes(&slave->dev, i, 1);
+ if (ret < 0)
+ return ret;
+ }
+
+ mask = slave->prop.sink_ports;
+ for_each_set_bit(i, &mask, 32) {
+ ret = add_all_attributes(&slave->dev, i, 0);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 3/3] soundwire: add Slave sysfs support
2020-05-18 20:35 ` [PATCH 3/3] soundwire: add Slave " Bard Liao
@ 2020-05-19 14:10 ` Greg KH
2020-05-20 11:57 ` Vinod Koul
1 sibling, 0 replies; 7+ messages in thread
From: Greg KH @ 2020-05-19 14:10 UTC (permalink / raw)
To: Bard Liao
Cc: alsa-devel, vkoul, vinod.koul, linux-kernel, tiwai, broonie,
jank, srinivas.kandagatla, rander.wang, ranjani.sridharan,
hui.wang, pierre-louis.bossart, sanyog.r.kale, slawomir.blauciak,
mengdong.lin, bard.liao
On Tue, May 19, 2020 at 04:35:51AM +0800, Bard Liao wrote:
> From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
>
> Expose MIPI DisCo Slave properties in sysfs.
>
> For Slave properties and Data Port 0, the attributes are managed with
> simple devm_ support.
>
> A Slave Device may have more than one Data Port (DPN), and each Data
> Port can be sink or source. The attributes are created dynamically
> using pre-canned macros, but still use devm_ with a name attribute
> group to avoid creating kobjects - as requested by GregKH. In the
> _show function, we use container_of() to retrieve port number and
> direction required to extract the information.
>
> Audio modes are not supported for now. Depending on the discussions
> the SoundWire Device Class, we may add it later as is or follow the
> new specification.
>
> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 3/3] soundwire: add Slave sysfs support
2020-05-18 20:35 ` [PATCH 3/3] soundwire: add Slave " Bard Liao
2020-05-19 14:10 ` Greg KH
@ 2020-05-20 11:57 ` Vinod Koul
1 sibling, 0 replies; 7+ messages in thread
From: Vinod Koul @ 2020-05-20 11:57 UTC (permalink / raw)
To: Bard Liao
Cc: alsa-devel, linux-kernel, tiwai, broonie, gregkh, jank,
srinivas.kandagatla, rander.wang, ranjani.sridharan, hui.wang,
pierre-louis.bossart, sanyog.r.kale, slawomir.blauciak,
mengdong.lin, bard.liao
On 19-05-20, 04:35, Bard Liao wrote:
> +int sdw_slave_sysfs_init(struct sdw_slave *slave)
> +{
> + int ret;
> +
> + ret = devm_device_add_groups(&slave->dev, slave_groups);
> + if (ret < 0)
> + return ret;
> +
> + ret = devm_device_add_group(&slave->dev, &sdw_slave_dev_attr_group);
> + if (ret < 0)
> + return ret;
> +
> + if (slave->prop.dp0_prop) {
> + ret = devm_device_add_group(&slave->dev, &dp0_group);
> + if (ret < 0)
> + return ret;
> + }
> +
> + if (slave->prop.source_ports || slave->prop.sink_ports) {
> + ret = sdw_slave_sysfs_dpn_init(slave);
> + if (ret < 0)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
We have trailing line here
> +static int add_all_attributes(struct device *dev, int N, int dir)
> +{
> + struct attribute **dpn_attrs;
> + struct attribute_group *dpn_group;
> + int i = 0;
> + int ret;
> +
> + /* allocate attributes, last one is NULL */
> + dpn_attrs = devm_kcalloc(dev, SDW_DPN_ATTRIBUTES + 1,
> + sizeof(struct attribute *),
> + GFP_KERNEL);
> + if (!dpn_attrs)
> + return -ENOMEM;
> +
> + ret = max_word_attribute_alloc(dev, &dpn_attrs[i++],
> + N, dir, "%d\n");
> + if (ret < 0)
> + return ret;
> +
> + ret = min_word_attribute_alloc(dev, &dpn_attrs[i++],
> + N, dir, "%d\n");
> + if (ret < 0)
> + return ret;
> +
> + ret = words_attribute_alloc(dev, &dpn_attrs[i++],
> + N, dir, "%d\n");
> + if (ret < 0)
> + return ret;
> +
> + ret = type_attribute_alloc(dev, &dpn_attrs[i++],
> + N, dir, "%d\n");
> + if (ret < 0)
> + return ret;
> +
> + ret = max_grouping_attribute_alloc(dev, &dpn_attrs[i++],
> + N, dir, "%d\n");
> + if (ret < 0)
> + return ret;
> +
> + ret = simple_ch_prep_sm_attribute_alloc(dev, &dpn_attrs[i++],
> + N, dir, "%d\n");
> + if (ret < 0)
> + return ret;
> +
> + ret = ch_prep_timeout_attribute_alloc(dev, &dpn_attrs[i++],
> + N, dir, "%d\n");
> + if (ret < 0)
> + return ret;
> +
> + ret = imp_def_interrupts_attribute_alloc(dev, &dpn_attrs[i++],
> + N, dir, "0x%x\n");
> + if (ret < 0)
> + return ret;
> +
> + ret = min_ch_attribute_alloc(dev, &dpn_attrs[i++],
> + N, dir, "%d\n");
> + if (ret < 0)
> + return ret;
> +
> + ret = max_ch_attribute_alloc(dev, &dpn_attrs[i++],
> + N, dir, "%d\n");
> + if (ret < 0)
> + return ret;
> +
> + ret = channels_attribute_alloc(dev, &dpn_attrs[i++],
> + N, dir, "%d\n");
> + if (ret < 0)
> + return ret;
> +
> + ret = ch_combinations_attribute_alloc(dev, &dpn_attrs[i++],
> + N, dir, "%d\n");
> + if (ret < 0)
> + return ret;
> +
> + ret = max_async_buffer_attribute_alloc(dev, &dpn_attrs[i++],
> + N, dir, "%d\n");
> + if (ret < 0)
> + return ret;
> +
> + ret = block_pack_mode_attribute_alloc(dev, &dpn_attrs[i++],
> + N, dir, "%d\n");
> + if (ret < 0)
> + return ret;
> +
> + ret = port_encoding_attribute_alloc(dev, &dpn_attrs[i++],
> + N, dir, "%d\n");
> + if (ret < 0)
> + return ret;
> +
> + /* paranioa check for editing mistakes */
s/paranioa/paranoia
I found only these two nitpicks so I will go ahead and apply these and
fix them up.
--
~Vinod
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 0/3] soundwire: add sysfs support
2020-05-18 20:35 [PATCH 0/3] soundwire: add sysfs support Bard Liao
` (2 preceding siblings ...)
2020-05-18 20:35 ` [PATCH 3/3] soundwire: add Slave " Bard Liao
@ 2020-05-20 12:00 ` Vinod Koul
3 siblings, 0 replies; 7+ messages in thread
From: Vinod Koul @ 2020-05-20 12:00 UTC (permalink / raw)
To: Bard Liao
Cc: alsa-devel, linux-kernel, tiwai, broonie, gregkh, jank,
srinivas.kandagatla, rander.wang, ranjani.sridharan, hui.wang,
pierre-louis.bossart, sanyog.r.kale, slawomir.blauciak,
mengdong.lin, bard.liao
On 19-05-20, 04:35, Bard Liao wrote:
> Add soundwire sysfs support.
Thanks for this, I have applied these and two patches for issues I found,
one was trailing line in drivers/soundwire/sysfs_slave.c and other was a
typo (3rd patch)
--
~Vinod
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-05-20 12:01 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-18 20:35 [PATCH 0/3] soundwire: add sysfs support Bard Liao
2020-05-18 20:35 ` [PATCH 1/3] soundwire: disco: s/ch/channels/ Bard Liao
2020-05-18 20:35 ` [PATCH 2/3] soundwire: master: add sysfs support Bard Liao
2020-05-18 20:35 ` [PATCH 3/3] soundwire: add Slave " Bard Liao
2020-05-19 14:10 ` Greg KH
2020-05-20 11:57 ` Vinod Koul
2020-05-20 12:00 ` [PATCH 0/3] soundwire: add " Vinod Koul
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).