linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Will Deacon <will@kernel.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Russell King <linux@arm.linux.org.uk>,
	Thomas Gleixner <tglx@linutronix.de>,
	Jason Cooper <jason@lakedaemon.net>,
	Sumit Garg <sumit.garg@linaro.org>,
	kernel-team@android.com
Subject: [PATCH 07/11] irqchip/gic: Refactor SMP configuration
Date: Tue, 19 May 2020 17:17:51 +0100	[thread overview]
Message-ID: <20200519161755.209565-8-maz@kernel.org> (raw)
In-Reply-To: <20200519161755.209565-1-maz@kernel.org>

As we are about to change quite a lot of the SMP support code,
let's start by moving it around so that it minimizes the amount
of #ifdefery.

Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 drivers/irqchip/irq-gic.c | 92 ++++++++++++++++++++-------------------
 1 file changed, 48 insertions(+), 44 deletions(-)

diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 30ab623343d3..e289810e794c 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -325,36 +325,6 @@ static int gic_irq_set_vcpu_affinity(struct irq_data *d, void *vcpu)
 	return 0;
 }
 
-#ifdef CONFIG_SMP
-static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
-			    bool force)
-{
-	void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3);
-	unsigned int cpu, shift = (gic_irq(d) % 4) * 8;
-	u32 val, mask, bit;
-	unsigned long flags;
-
-	if (!force)
-		cpu = cpumask_any_and(mask_val, cpu_online_mask);
-	else
-		cpu = cpumask_first(mask_val);
-
-	if (cpu >= NR_GIC_CPU_IF || cpu >= nr_cpu_ids)
-		return -EINVAL;
-
-	gic_lock_irqsave(flags);
-	mask = 0xff << shift;
-	bit = gic_cpu_map[cpu] << shift;
-	val = readl_relaxed(reg) & ~mask;
-	writel_relaxed(val | bit, reg);
-	gic_unlock_irqrestore(flags);
-
-	irq_data_update_effective_affinity(d, cpumask_of(cpu));
-
-	return IRQ_SET_MASK_OK_DONE;
-}
-#endif
-
 static void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
 {
 	u32 irqstat, irqnr;
@@ -803,6 +773,34 @@ static int gic_pm_init(struct gic_chip_data *gic)
 #endif
 
 #ifdef CONFIG_SMP
+static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
+			    bool force)
+{
+	void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3);
+	unsigned int cpu, shift = (gic_irq(d) % 4) * 8;
+	u32 val, mask, bit;
+	unsigned long flags;
+
+	if (!force)
+		cpu = cpumask_any_and(mask_val, cpu_online_mask);
+	else
+		cpu = cpumask_first(mask_val);
+
+	if (cpu >= NR_GIC_CPU_IF || cpu >= nr_cpu_ids)
+		return -EINVAL;
+
+	gic_lock_irqsave(flags);
+	mask = 0xff << shift;
+	bit = gic_cpu_map[cpu] << shift;
+	val = readl_relaxed(reg) & ~mask;
+	writel_relaxed(val | bit, reg);
+	gic_unlock_irqrestore(flags);
+
+	irq_data_update_effective_affinity(d, cpumask_of(cpu));
+
+	return IRQ_SET_MASK_OK_DONE;
+}
+
 static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
 {
 	int cpu;
@@ -832,6 +830,23 @@ static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
 
 	gic_unlock_irqrestore(flags);
 }
+
+static int gic_starting_cpu(unsigned int cpu)
+{
+	gic_cpu_init(&gic_data[0]);
+	return 0;
+}
+
+static __init void gic_smp_init(void)
+{
+	set_smp_cross_call(gic_raise_softirq);
+	cpuhp_setup_state_nocalls(CPUHP_AP_IRQ_GIC_STARTING,
+				  "irqchip/arm/gic:starting",
+				  gic_starting_cpu, NULL);
+}
+#else
+#define gic_smp_init()		do { } while(0)
+#define gic_set_affinity	NULL
 #endif
 
 #ifdef CONFIG_BL_SWITCHER
@@ -1036,12 +1051,6 @@ static int gic_irq_domain_translate(struct irq_domain *d,
 	return -EINVAL;
 }
 
-static int gic_starting_cpu(unsigned int cpu)
-{
-	gic_cpu_init(&gic_data[0]);
-	return 0;
-}
-
 static int gic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
 				unsigned int nr_irqs, void *arg)
 {
@@ -1088,10 +1097,8 @@ static void gic_init_chip(struct gic_chip_data *gic, struct device *dev,
 		gic->chip.irq_set_vcpu_affinity = gic_irq_set_vcpu_affinity;
 	}
 
-#ifdef CONFIG_SMP
 	if (gic == &gic_data[0])
 		gic->chip.irq_set_affinity = gic_set_affinity;
-#endif
 }
 
 static int gic_init_bases(struct gic_chip_data *gic,
@@ -1208,12 +1215,7 @@ static int __init __gic_init_bases(struct gic_chip_data *gic,
 		 */
 		for (i = 0; i < NR_GIC_CPU_IF; i++)
 			gic_cpu_map[i] = 0xff;
-#ifdef CONFIG_SMP
-		set_smp_cross_call(gic_raise_softirq);
-#endif
-		cpuhp_setup_state_nocalls(CPUHP_AP_IRQ_GIC_STARTING,
-					  "irqchip/arm/gic:starting",
-					  gic_starting_cpu, NULL);
+
 		set_handle_irq(gic_handle_irq);
 		if (static_branch_likely(&supports_deactivate_key))
 			pr_info("GIC: Using split EOI/Deactivate mode\n");
@@ -1230,6 +1232,8 @@ static int __init __gic_init_bases(struct gic_chip_data *gic,
 	ret = gic_init_bases(gic, handle);
 	if (ret)
 		kfree(name);
+	else if (gic == &gic_data[0])
+		gic_smp_init();
 
 	return ret;
 }
-- 
2.26.2


  parent reply	other threads:[~2020-05-19 16:18 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-19 16:17 [PATCH 00/11] arm/arm64: Turning IPIs into normal interrupts Marc Zyngier
2020-05-19 16:17 ` [PATCH 01/11] genirq: Add fasteoi IPI flow Marc Zyngier
2020-05-19 19:47   ` Florian Fainelli
2020-06-12  9:54     ` Marc Zyngier
2020-05-19 22:25   ` Valentin Schneider
2020-05-19 22:29     ` Valentin Schneider
2020-06-12  9:58     ` Marc Zyngier
2020-05-19 16:17 ` [PATCH 02/11] genirq: Allow interrupts to be excluded from /proc/interrupts Marc Zyngier
2020-05-19 16:17 ` [PATCH 03/11] arm64: Allow IPIs to be handled as normal interrupts Marc Zyngier
2020-05-21 14:03   ` Valentin Schneider
2020-05-19 16:17 ` [PATCH 04/11] ARM: " Marc Zyngier
2020-05-19 22:24   ` Russell King - ARM Linux admin
2020-05-21 14:03     ` Valentin Schneider
2020-05-21 15:12       ` Russell King - ARM Linux admin
2020-05-21 16:11         ` Valentin Schneider
2020-05-19 16:17 ` [PATCH 05/11] irqchip/gic-v3: Describe the SGI range Marc Zyngier
2020-05-19 16:17 ` [PATCH 06/11] irqchip/gic-v3: Configure SGIs as standard interrupts Marc Zyngier
2020-05-20  9:52   ` Sumit Garg
2020-05-20 10:24     ` Marc Zyngier
2020-05-21 14:04   ` Valentin Schneider
2020-06-12 10:39     ` Marc Zyngier
2020-05-19 16:17 ` Marc Zyngier [this message]
2020-05-19 16:17 ` [PATCH 08/11] irqchip/gic: " Marc Zyngier
2021-04-20 20:37   ` dann frazier
2021-04-20 21:25     ` dann frazier
2021-04-21 10:58       ` Marc Zyngier
2021-04-21 14:52         ` dann frazier
2021-04-21 15:49           ` Marc Zyngier
2020-05-19 16:17 ` [PATCH 09/11] irqchip/gic-common: Don't enable SGIs by default Marc Zyngier
2020-05-19 16:17 ` [PATCH 10/11] irqchip/bcm2836: Configure mailbox interrupts as standard interrupts Marc Zyngier
2020-05-19 16:17 ` [PATCH 11/11] arm64: Kill __smp_cross_call and co Marc Zyngier
2020-05-19 17:50 ` [PATCH 00/11] arm/arm64: Turning IPIs into normal interrupts Florian Fainelli
2020-05-19 19:47   ` Florian Fainelli
2020-06-12  9:49   ` Marc Zyngier
2020-06-12 16:57     ` Florian Fainelli
2020-05-19 22:25 ` Valentin Schneider

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200519161755.209565-8-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=jason@lakedaemon.net \
    --cc=kernel-team@android.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=sumit.garg@linaro.org \
    --cc=tglx@linutronix.de \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).