From: Stefano Stabellini <sstabellini@kernel.org>
To: jgross@suse.com, boris.ostrovsky@oracle.com, konrad.wilk@oracle.com
Cc: sstabellini@kernel.org, xen-devel@lists.xenproject.org,
linux-kernel@vger.kernel.org,
Stefano Stabellini <stefano.stabellini@xilinx.com>
Subject: [PATCH 03/10] swiotlb-xen: add struct device* parameter to xen_phys_to_bus
Date: Wed, 20 May 2020 16:45:13 -0700 [thread overview]
Message-ID: <20200520234520.22563-3-sstabellini@kernel.org> (raw)
In-Reply-To: <alpine.DEB.2.21.2005201628330.27502@sstabellini-ThinkPad-T480s>
From: Stefano Stabellini <stefano.stabellini@xilinx.com>
The parameter is unused in this patch.
No functional changes.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
---
drivers/xen/swiotlb-xen.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index b5e0492b07b9..958ee5517e0b 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -57,7 +57,7 @@ static unsigned long xen_io_tlb_nslabs;
* can be 32bit when dma_addr_t is 64bit leading to a loss in
* information if the shift is done before casting to 64bit.
*/
-static inline dma_addr_t xen_phys_to_bus(phys_addr_t paddr)
+static inline dma_addr_t xen_phys_to_bus(struct device *dev, phys_addr_t paddr)
{
unsigned long bfn = pfn_to_bfn(XEN_PFN_DOWN(paddr));
dma_addr_t dma = (dma_addr_t)bfn << XEN_PAGE_SHIFT;
@@ -78,9 +78,9 @@ static inline phys_addr_t xen_bus_to_phys(dma_addr_t baddr)
return paddr;
}
-static inline dma_addr_t xen_virt_to_bus(void *address)
+static inline dma_addr_t xen_virt_to_bus(struct device *dev, void *address)
{
- return xen_phys_to_bus(virt_to_phys(address));
+ return xen_phys_to_bus(dev, virt_to_phys(address));
}
static inline int range_straddles_page_boundary(phys_addr_t p, size_t size)
@@ -309,7 +309,7 @@ xen_swiotlb_alloc_coherent(struct device *hwdev, size_t size,
* Do not use virt_to_phys(ret) because on ARM it doesn't correspond
* to *dma_handle. */
phys = *dma_handle;
- dev_addr = xen_phys_to_bus(phys);
+ dev_addr = xen_phys_to_bus(hwdev, phys);
if (((dev_addr + size - 1 <= dma_mask)) &&
!range_straddles_page_boundary(phys, size))
*dma_handle = dev_addr;
@@ -367,7 +367,7 @@ static dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,
unsigned long attrs)
{
phys_addr_t map, phys = page_to_phys(page) + offset;
- dma_addr_t dev_addr = xen_phys_to_bus(phys);
+ dma_addr_t dev_addr = xen_phys_to_bus(dev, phys);
BUG_ON(dir == DMA_NONE);
/*
@@ -392,7 +392,7 @@ static dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,
return DMA_MAPPING_ERROR;
phys = map;
- dev_addr = xen_phys_to_bus(map);
+ dev_addr = xen_phys_to_bus(dev, map);
/*
* Ensure that the address returned is DMA'ble
@@ -536,7 +536,7 @@ xen_swiotlb_sync_sg_for_device(struct device *dev, struct scatterlist *sgl,
static int
xen_swiotlb_dma_supported(struct device *hwdev, u64 mask)
{
- return xen_virt_to_bus(xen_io_tlb_end - 1) <= mask;
+ return xen_virt_to_bus(hwdev, xen_io_tlb_end - 1) <= mask;
}
const struct dma_map_ops xen_swiotlb_dma_ops = {
--
2.17.1
next prev parent reply other threads:[~2020-05-20 23:45 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-20 23:45 [PATCH 00/10] fix swiotlb-xen for RPi4 Stefano Stabellini
2020-05-20 23:45 ` [PATCH 01/10] swiotlb-xen: use vmalloc_to_page on vmalloc virt addresses Stefano Stabellini
2020-05-21 8:01 ` Julien Grall
2020-05-22 3:54 ` Stefano Stabellini
2020-05-22 18:11 ` Julien Grall
2020-05-22 20:36 ` Stefano Stabellini
2020-05-20 23:45 ` [PATCH 02/10] swiotlb-xen: remove start_dma_addr Stefano Stabellini
2020-05-21 8:05 ` Julien Grall
2020-05-22 3:55 ` Stefano Stabellini
2020-05-22 18:16 ` Julien Grall
2020-05-22 20:47 ` Stefano Stabellini
2020-05-20 23:45 ` Stefano Stabellini [this message]
2020-05-20 23:45 ` [PATCH 04/10] swiotlb-xen: add struct device* parameter to xen_bus_to_phys Stefano Stabellini
2020-05-20 23:45 ` [PATCH 05/10] swiotlb-xen: add struct device* parameter to xen_dma_sync_for_cpu Stefano Stabellini
2020-05-20 23:45 ` [PATCH 06/10] swiotlb-xen: add struct device* parameter to xen_dma_sync_for_device Stefano Stabellini
2020-05-20 23:45 ` [PATCH 07/10] swiotlb-xen: add struct device* parameter to is_xen_swiotlb_buffer Stefano Stabellini
2020-05-20 23:45 ` [PATCH 08/10] swiotlb-xen: introduce phys_to_dma/dma_to_phys translations Stefano Stabellini
2020-05-21 8:07 ` Julien Grall
2020-05-21 22:59 ` Boris Ostrovsky
2020-05-22 17:34 ` Stefano Stabellini
2020-05-22 18:29 ` Boris Ostrovsky
2020-05-20 23:45 ` [PATCH 09/10] xen/arm: introduce phys/dma translations in xen_dma_sync_for_* Stefano Stabellini
2020-05-21 8:18 ` Julien Grall
2020-05-21 20:08 ` Stefano Stabellini
2020-05-21 20:17 ` Julien Grall
2020-05-20 23:45 ` [PATCH 10/10] xen/arm: call dma_to_phys on the dma_addr_t parameter of dma_cache_maint Stefano Stabellini
2020-05-21 8:25 ` Julien Grall
2020-05-20 23:51 ` [PATCH 00/10] fix swiotlb-xen for RPi4 Roman Shaposhnik
2020-05-20 23:56 ` Stefano Stabellini
2020-06-02 21:51 ` Stefano Stabellini
2020-06-03 0:15 ` Boris Ostrovsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200520234520.22563-3-sstabellini@kernel.org \
--to=sstabellini@kernel.org \
--cc=boris.ostrovsky@oracle.com \
--cc=jgross@suse.com \
--cc=konrad.wilk@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stefano.stabellini@xilinx.com \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).