From: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
To: jic23@kernel.org, robh+dt@kernel.org, robh@kernel.org,
mchehab+huawei@kernel.org, davem@davemloft.net,
gregkh@linuxfoundation.org
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Subject: [PATCH v2 07/12] iio: imu: add Kconfig and Makefile for inv_icm42600 driver
Date: Wed, 27 May 2020 20:57:06 +0200 [thread overview]
Message-ID: <20200527185711.21331-8-jmaneyrol@invensense.com> (raw)
In-Reply-To: <20200527185711.21331-1-jmaneyrol@invensense.com>
Add 3 modules: inv-icm42600, inv-icm42600-i2c, inv-icm42600-spi.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
---
drivers/iio/imu/Kconfig | 1 +
drivers/iio/imu/Makefile | 1 +
drivers/iio/imu/inv_icm42600/Kconfig | 28 +++++++++++++++++++++++++++
drivers/iio/imu/inv_icm42600/Makefile | 13 +++++++++++++
4 files changed, 43 insertions(+)
create mode 100644 drivers/iio/imu/inv_icm42600/Kconfig
create mode 100644 drivers/iio/imu/inv_icm42600/Makefile
diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig
index fc4123d518bc..f02883b08480 100644
--- a/drivers/iio/imu/Kconfig
+++ b/drivers/iio/imu/Kconfig
@@ -91,6 +91,7 @@ config KMX61
To compile this driver as module, choose M here: the module will
be called kmx61.
+source "drivers/iio/imu/inv_icm42600/Kconfig"
source "drivers/iio/imu/inv_mpu6050/Kconfig"
source "drivers/iio/imu/st_lsm6dsx/Kconfig"
diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile
index 88b2c4555230..13e9ff442b11 100644
--- a/drivers/iio/imu/Makefile
+++ b/drivers/iio/imu/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_FXOS8700) += fxos8700_core.o
obj-$(CONFIG_FXOS8700_I2C) += fxos8700_i2c.o
obj-$(CONFIG_FXOS8700_SPI) += fxos8700_spi.o
+obj-y += inv_icm42600/
obj-y += inv_mpu6050/
obj-$(CONFIG_KMX61) += kmx61.o
diff --git a/drivers/iio/imu/inv_icm42600/Kconfig b/drivers/iio/imu/inv_icm42600/Kconfig
new file mode 100644
index 000000000000..22390a72f0a3
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42600/Kconfig
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+config INV_ICM42600
+ tristate
+
+config INV_ICM42600_I2C
+ tristate "InvenSense ICM-426xx I2C driver"
+ depends on I2C
+ select INV_ICM42600
+ select REGMAP_I2C
+ help
+ This driver supports the InvenSense ICM-426xx motion tracking
+ devices over I2C.
+
+ This driver can be built as a module. The module will be called
+ inv-icm42600-i2c.
+
+config INV_ICM42600_SPI
+ tristate "InvenSense ICM-426xx SPI driver"
+ depends on SPI_MASTER
+ select INV_ICM42600
+ select REGMAP_SPI
+ help
+ This driver supports the InvenSense ICM-426xx motion tracking
+ devices over SPI.
+
+ This driver can be built as a module. The module will be called
+ inv-icm42600-spi.
diff --git a/drivers/iio/imu/inv_icm42600/Makefile b/drivers/iio/imu/inv_icm42600/Makefile
new file mode 100644
index 000000000000..48965824f00c
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42600/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+obj-$(CONFIG_INV_ICM42600) += inv-icm42600.o
+inv-icm42600-y += inv_icm42600_core.o
+inv-icm42600-y += inv_icm42600_gyro.o
+inv-icm42600-y += inv_icm42600_accel.o
+inv-icm42600-y += inv_icm42600_temp.o
+
+obj-$(CONFIG_INV_ICM42600_I2C) += inv-icm42600-i2c.o
+inv-icm42600-i2c-y += inv_icm42600_i2c.o
+
+obj-$(CONFIG_INV_ICM42600_SPI) += inv-icm42600-spi.o
+inv-icm42600-spi-y += inv_icm42600_spi.o
--
2.17.1
next prev parent reply other threads:[~2020-05-27 18:58 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-27 18:56 [PATCH v2 00/12] iio: imu: new inv_icm42600 driver Jean-Baptiste Maneyrol
2020-05-27 18:57 ` [PATCH v2 01/12] iio: imu: inv_icm42600: add core of " Jean-Baptiste Maneyrol
2020-05-31 11:34 ` Jonathan Cameron
2020-06-02 7:56 ` Jean-Baptiste Maneyrol
2020-06-06 14:29 ` Jonathan Cameron
2020-05-27 18:57 ` [PATCH v2 02/12] iio: imu: inv_icm42600: add I2C driver for " Jean-Baptiste Maneyrol
2020-05-31 11:36 ` Jonathan Cameron
2020-05-27 18:57 ` [PATCH v2 03/12] iio: imu: inv_icm42600: add SPI " Jean-Baptiste Maneyrol
2020-05-27 18:57 ` [PATCH v2 04/12] iio: imu: inv_icm42600: add gyroscope IIO device Jean-Baptiste Maneyrol
2020-05-31 11:54 ` Jonathan Cameron
2020-06-02 9:10 ` Jean-Baptiste Maneyrol
2020-06-06 14:33 ` Jonathan Cameron
2020-05-27 18:57 ` [PATCH v2 05/12] iio: imu: inv_icm42600: add accelerometer " Jean-Baptiste Maneyrol
2020-05-27 18:57 ` [PATCH v2 06/12] iio: imu: inv_icm42600: add temperature sensor support Jean-Baptiste Maneyrol
2020-05-27 18:57 ` Jean-Baptiste Maneyrol [this message]
2020-05-27 18:57 ` [PATCH v2 08/12] iio: imu: inv_icm42600: add device interrupt Jean-Baptiste Maneyrol
2020-05-31 12:16 ` Jonathan Cameron
2020-05-27 18:57 ` [PATCH v2 09/12] iio: imu: inv_icm42600: add buffer support in iio devices Jean-Baptiste Maneyrol
2020-05-30 8:41 ` kbuild test robot
2020-05-31 12:56 ` Jonathan Cameron
2020-06-02 12:57 ` Jean-Baptiste Maneyrol
2020-06-03 14:47 ` --[[SPOOF or PHISHING]]--Re: " Jean-Baptiste Maneyrol
2020-06-06 14:42 ` Jonathan Cameron
2020-05-27 18:57 ` [PATCH v2 10/12] iio: imu: inv_icm42600: add accurate timestamping Jean-Baptiste Maneyrol
2020-05-31 13:04 ` Jonathan Cameron
2020-05-27 18:57 ` [PATCH v2 11/12] dt-bindings: iio: imu: Add inv_icm42600 documentation Jean-Baptiste Maneyrol
2020-05-29 19:05 ` Rob Herring
2020-05-27 18:57 ` [PATCH v2 12/12] MAINTAINERS: add entry for inv_icm42600 6-axis imu sensor Jean-Baptiste Maneyrol
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200527185711.21331-8-jmaneyrol@invensense.com \
--to=jmaneyrol@invensense.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mchehab+huawei@kernel.org \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).