linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Valentin Longchamp <valentin@longchamp.me>,
	Matteo Ghidoni <matteo.ghidoni@ch.abb.com>,
	"David S . Miller" <davem@davemloft.net>,
	Sasha Levin <sashal@kernel.org>,
	netdev@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Subject: [PATCH AUTOSEL 4.14 08/13] net/ethernet/freescale: rework quiesce/activate for ucc_geth
Date: Thu, 28 May 2020 07:57:39 -0400	[thread overview]
Message-ID: <20200528115744.1406533-8-sashal@kernel.org> (raw)
In-Reply-To: <20200528115744.1406533-1-sashal@kernel.org>

From: Valentin Longchamp <valentin@longchamp.me>

[ Upstream commit 79dde73cf9bcf1dd317a2667f78b758e9fe139ed ]

ugeth_quiesce/activate are used to halt the controller when there is a
link change that requires to reconfigure the mac.

The previous implementation called netif_device_detach(). This however
causes the initial activation of the netdevice to fail precisely because
it's detached. For details, see [1].

A possible workaround was the revert of commit
net: linkwatch: add check for netdevice being present to linkwatch_do_dev
However, the check introduced in the above commit is correct and shall be
kept.

The netif_device_detach() is thus replaced with
netif_tx_stop_all_queues() that prevents any tranmission. This allows to
perform mac config change required by the link change, without detaching
the corresponding netdevice and thus not preventing its initial
activation.

[1] https://lists.openwall.net/netdev/2020/01/08/201

Signed-off-by: Valentin Longchamp <valentin@longchamp.me>
Acked-by: Matteo Ghidoni <matteo.ghidoni@ch.abb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/ucc_geth.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index bddf4c25ee6e..7c2a9fd4dc1a 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -45,6 +45,7 @@
 #include <soc/fsl/qe/ucc.h>
 #include <soc/fsl/qe/ucc_fast.h>
 #include <asm/machdep.h>
+#include <net/sch_generic.h>
 
 #include "ucc_geth.h"
 
@@ -1551,11 +1552,8 @@ static int ugeth_disable(struct ucc_geth_private *ugeth, enum comm_dir mode)
 
 static void ugeth_quiesce(struct ucc_geth_private *ugeth)
 {
-	/* Prevent any further xmits, plus detach the device. */
-	netif_device_detach(ugeth->ndev);
-
-	/* Wait for any current xmits to finish. */
-	netif_tx_disable(ugeth->ndev);
+	/* Prevent any further xmits */
+	netif_tx_stop_all_queues(ugeth->ndev);
 
 	/* Disable the interrupt to avoid NAPI rescheduling. */
 	disable_irq(ugeth->ug_info->uf_info.irq);
@@ -1568,7 +1566,10 @@ static void ugeth_activate(struct ucc_geth_private *ugeth)
 {
 	napi_enable(&ugeth->napi);
 	enable_irq(ugeth->ug_info->uf_info.irq);
-	netif_device_attach(ugeth->ndev);
+
+	/* allow to xmit again  */
+	netif_tx_wake_all_queues(ugeth->ndev);
+	__netdev_watchdog_up(ugeth->ndev);
 }
 
 /* Called every time the controller might need to be made
-- 
2.25.1


  parent reply	other threads:[~2020-05-28 11:58 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-28 11:57 [PATCH AUTOSEL 4.14 01/13] ARC: Fix ICCM & DCCM runtime size checks Sasha Levin
2020-05-28 11:57 ` [PATCH AUTOSEL 4.14 02/13] ARC: [plat-eznps]: Restrict to CONFIG_ISA_ARCOMPACT Sasha Levin
2020-05-28 11:57 ` [PATCH AUTOSEL 4.14 03/13] i2c: altera: Fix race between xfer_msg and isr thread Sasha Levin
2020-05-28 11:57 ` [PATCH AUTOSEL 4.14 04/13] net sched: fix reporting the first-time use timestamp Sasha Levin
2020-05-28 11:57 ` [PATCH AUTOSEL 4.14 05/13] x86/mmiotrace: Use cpumask_available() for cpumask_var_t variables Sasha Levin
2020-05-28 11:57 ` [PATCH AUTOSEL 4.14 06/13] net: bmac: Fix read of MAC address from ROM Sasha Levin
2020-05-28 11:57 ` [PATCH AUTOSEL 4.14 07/13] r8152: support additional Microsoft Surface Ethernet Adapter variant Sasha Levin
2020-05-28 11:57 ` Sasha Levin [this message]
2020-05-28 11:57 ` [PATCH AUTOSEL 4.14 09/13] net: ethernet: stmmac: Enable interface clocks on probe for IPQ806x Sasha Levin
2020-05-28 11:57 ` [PATCH AUTOSEL 4.14 10/13] net: sun: fix missing release regions in cas_init_one() Sasha Levin
2020-05-28 11:57 ` [PATCH AUTOSEL 4.14 11/13] net/mlx5: Add command entry handling completion Sasha Levin
2020-05-28 11:57 ` [PATCH AUTOSEL 4.14 12/13] net/mlx4_core: fix a memory leak bug Sasha Levin
2020-05-28 11:57 ` [PATCH AUTOSEL 4.14 13/13] net: smsc911x: Fix runtime PM imbalance on error Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200528115744.1406533-8-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=matteo.ghidoni@ch.abb.com \
    --cc=netdev@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=valentin@longchamp.me \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).