[PATCH 0/5] Suspend and resume fixes for omapdrm pdata removal

[Tony Lindgren <tony@atomide.com>]

Hi all,

Recent omapdrm related changes to drop legacy platform data caused
a suspend and resume regression. I must have only tested suspend
and resume only with the changes preparing to drop the platform data,
but looks like I forgot to test suspend after dropping the platform
data.

There seem to be other longer term DSS regressions remaining too.
Looks like at least panel-simple currently does not probe. It fails
with "panel-simple display: Reject override mode: panel has a fixed
mode". I think the solution there is to drop the board specific
panel-timing related dts lines, but that still seems to be pending.
Anyways, no luck getting the LCD enabled on am437x-sk-evm with v5.6
or v5.7-rc kernels.

Regards,

Tony


Tony Lindgren (5):
  drm/omap: Fix suspend resume regression after platform data removal
  bus: ti-sysc: Use optional clocks on for enable and wait for softreset
    bit
  bus: ti-sysc: Ignore clockactivity unless specified as a quirk
  bus: ti-sysc: Fix uninitialized framedonetv_irq
  ARM: OMAP2+: Fix legacy mode dss_reset

 arch/arm/mach-omap2/omap_hwmod.c         |  2 +-
 drivers/bus/ti-sysc.c                    | 93 ++++++++++++++++++------
 drivers/gpu/drm/omapdrm/dss/dispc.c      |  6 +-
 drivers/gpu/drm/omapdrm/dss/dsi.c        |  6 +-
 drivers/gpu/drm/omapdrm/dss/dss.c        |  6 +-
 drivers/gpu/drm/omapdrm/dss/venc.c       |  6 +-
 drivers/gpu/drm/omapdrm/omap_dmm_tiler.c |  4 +-
 7 files changed, 79 insertions(+), 44 deletions(-)

-- 
2.26.2