* [PATCH v2 0/4] ARC: [plat-hsdk-4xd] initial port for HSDK-4xD board
@ 2020-06-04 17:39 Eugeniy Paltsev
2020-06-04 17:39 ` [PATCH v2 1/4] ARC: allow to override default mcpu compiler flag Eugeniy Paltsev
` (4 more replies)
0 siblings, 5 replies; 12+ messages in thread
From: Eugeniy Paltsev @ 2020-06-04 17:39 UTC (permalink / raw)
To: linux-snps-arc, Vineet Gupta
Cc: linux-kernel, Alexey Brodkin, Eugeniy Paltsev
Changes v1->v2:
* Fallback to ISA default mcpu flag if custom one isn't supported by
compiler.
* Drop HSDK custom Kconfig options (choose between HSDK and HSDK-4xD) as
we don't need it (at least for now). Instead we select ARC_LPB_DISABLE
for both boards but it's totally OK as HSDK doesn't have LPB so
disabling will be skipped by BCR check in runtime.
* Add missing HSDK-4xD device tree bindings. Convert HSDK device tree
bindings to json-schema.
Eugeniy Paltsev (4):
ARC: allow to override default mcpu compiler flag
ARC: ARCv2: support loop buffer (LPB) disabling
ARC: [plat-hsdk-4xd] initial port for HSDK-4xD board
ARC: [plat-hsdk*] document HSDK-4xD board/SoC bindings
.../devicetree/bindings/arc/hsdk.txt | 7 -
.../devicetree/bindings/arc/hsdk.yaml | 26 ++
arch/arc/Kconfig | 15 +
arch/arc/Makefile | 21 +-
arch/arc/boot/dts/hsdk-4xd.dts | 322 ++++++++++++++++++
arch/arc/configs/hsdk_4xd_defconfig | 98 ++++++
arch/arc/kernel/devtree.c | 1 +
arch/arc/kernel/head.S | 8 +
arch/arc/plat-hsdk/Kconfig | 3 +-
arch/arc/plat-hsdk/platform.c | 1 +
10 files changed, 492 insertions(+), 10 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arc/hsdk.txt
create mode 100644 Documentation/devicetree/bindings/arc/hsdk.yaml
create mode 100644 arch/arc/boot/dts/hsdk-4xd.dts
create mode 100644 arch/arc/configs/hsdk_4xd_defconfig
--
2.21.3
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH v2 1/4] ARC: allow to override default mcpu compiler flag 2020-06-04 17:39 [PATCH v2 0/4] ARC: [plat-hsdk-4xd] initial port for HSDK-4xD board Eugeniy Paltsev @ 2020-06-04 17:39 ` Eugeniy Paltsev 2020-06-04 18:27 ` Vineet Gupta 2020-06-05 10:47 ` Alexey Brodkin 2020-06-04 17:39 ` [PATCH v2 2/4] ARC: ARCv2: support loop buffer (LPB) disabling Eugeniy Paltsev ` (3 subsequent siblings) 4 siblings, 2 replies; 12+ messages in thread From: Eugeniy Paltsev @ 2020-06-04 17:39 UTC (permalink / raw) To: linux-snps-arc, Vineet Gupta Cc: linux-kernel, Alexey Brodkin, Eugeniy Paltsev Kernel builds set their own default -mcpu for a given ISA build. But that gets in the way of "custom" -mcpu flags from propagating into kernel build. This will also be used in next patches for HSDK-4xD board support which uses a different -mcpu to effect dual issue scheduling. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> --- arch/arc/Kconfig | 9 +++++++++ arch/arc/Makefile | 21 +++++++++++++++++++-- 2 files changed, 28 insertions(+), 2 deletions(-) diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index ff306246d0f8..7034c217708f 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -377,6 +377,15 @@ config ARC_HAS_SWAPE bool "Insn: SWAPE (endian-swap)" default y +config ARC_TUNE_MCPU + string "Override default -mcpu compiler flag" + default "" + help + Override default -mcpu=xxx compiler flag (which is set depending on + the ISA version) with the specified value. + NOTE: If specified flag isn't supported by current compiler the + ISA default value will be used as a fallback. + if ISA_ARCV2 config ARC_USE_UNALIGNED_MEM_ACCESS diff --git a/arch/arc/Makefile b/arch/arc/Makefile index 20e9ab6cc521..2b66e8264174 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -10,8 +10,25 @@ CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux-) endif cflags-y += -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__ -cflags-$(CONFIG_ISA_ARCOMPACT) += -mA7 -cflags-$(CONFIG_ISA_ARCV2) += -mcpu=hs38 + +tune-mcpu-def-$(CONFIG_ISA_ARCOMPACT) := -mA7 +tune-mcpu-def-$(CONFIG_ISA_ARCV2) := -mcpu=hs38 + +ifeq ($(CONFIG_ARC_TUNE_MCPU),"") +cflags-y += $(tune-mcpu-def-y) +else +tune-mcpu := $(shell echo $(CONFIG_ARC_TUNE_MCPU)) +tune-mcpu-ok := $(call cc-option-yn, $(tune-mcpu)) +ifeq ($(tune-mcpu-ok),y) +cflags-y += $(tune-mcpu) +else +# The flag provided by 'CONFIG_ARC_TUNE_MCPU' option isn't known by this compiler +# (probably the compiler is too old). Use ISA default mcpu flag instead as a safe option. +$(warning ** WARNING ** CONFIG_ARC_TUNE_MCPU flag '$(tune-mcpu)' is unknown, fallback to '$(tune-mcpu-def-y)') +cflags-y += $(tune-mcpu-def-y) +endif +endif + ifdef CONFIG_ARC_CURR_IN_REG # For a global register defintion, make sure it gets passed to every file -- 2.21.3 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v2 1/4] ARC: allow to override default mcpu compiler flag 2020-06-04 17:39 ` [PATCH v2 1/4] ARC: allow to override default mcpu compiler flag Eugeniy Paltsev @ 2020-06-04 18:27 ` Vineet Gupta 2020-06-05 10:47 ` Alexey Brodkin 1 sibling, 0 replies; 12+ messages in thread From: Vineet Gupta @ 2020-06-04 18:27 UTC (permalink / raw) To: Eugeniy Paltsev, linux-snps-arc; +Cc: Alexey Brodkin, linux-kernel On 6/4/20 10:39 AM, Eugeniy Paltsev wrote: > Kernel builds set their own default -mcpu for a given ISA build. > But that gets in the way of "custom" -mcpu flags from propagating > into kernel build. > > This will also be used in next patches for HSDK-4xD board support which > uses a different -mcpu to effect dual issue scheduling. > > Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Much better. Ack with nit below. > --- > arch/arc/Kconfig | 9 +++++++++ > arch/arc/Makefile | 21 +++++++++++++++++++-- > 2 files changed, 28 insertions(+), 2 deletions(-) > > diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig > index ff306246d0f8..7034c217708f 100644 > --- a/arch/arc/Kconfig > +++ b/arch/arc/Kconfig > @@ -377,6 +377,15 @@ config ARC_HAS_SWAPE > bool "Insn: SWAPE (endian-swap)" > default y > > +config ARC_TUNE_MCPU > + string "Override default -mcpu compiler flag" > + default "" > + help > + Override default -mcpu=xxx compiler flag (which is set depending on > + the ISA version) with the specified value. > + NOTE: If specified flag isn't supported by current compiler the > + ISA default value will be used as a fallback. > + > if ISA_ARCV2 > > config ARC_USE_UNALIGNED_MEM_ACCESS > diff --git a/arch/arc/Makefile b/arch/arc/Makefile > index 20e9ab6cc521..2b66e8264174 100644 > --- a/arch/arc/Makefile > +++ b/arch/arc/Makefile > @@ -10,8 +10,25 @@ CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux-) > endif > > cflags-y += -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__ > -cflags-$(CONFIG_ISA_ARCOMPACT) += -mA7 > -cflags-$(CONFIG_ISA_ARCV2) += -mcpu=hs38 > + > +tune-mcpu-def-$(CONFIG_ISA_ARCOMPACT) := -mA7 > +tune-mcpu-def-$(CONFIG_ISA_ARCV2) := -mcpu=hs38 > + > +ifeq ($(CONFIG_ARC_TUNE_MCPU),"") > +cflags-y += $(tune-mcpu-def-y) > +else > +tune-mcpu := $(shell echo $(CONFIG_ARC_TUNE_MCPU)) > +tune-mcpu-ok := $(call cc-option-yn, $(tune-mcpu)) > +ifeq ($(tune-mcpu-ok),y) > +cflags-y += $(tune-mcpu) > +else > +# The flag provided by 'CONFIG_ARC_TUNE_MCPU' option isn't known by this compiler > +# (probably the compiler is too old). Use ISA default mcpu flag instead as a safe option. It is obvious what is done here and the comments can be skipped (no need to repost). > +$(warning ** WARNING ** CONFIG_ARC_TUNE_MCPU flag '$(tune-mcpu)' is unknown, fallback to '$(tune-mcpu-def-y)') > +cflags-y += $(tune-mcpu-def-y) > +endif > +endif -Vineet ^ permalink raw reply [flat|nested] 12+ messages in thread
* RE: [PATCH v2 1/4] ARC: allow to override default mcpu compiler flag 2020-06-04 17:39 ` [PATCH v2 1/4] ARC: allow to override default mcpu compiler flag Eugeniy Paltsev 2020-06-04 18:27 ` Vineet Gupta @ 2020-06-05 10:47 ` Alexey Brodkin 2020-06-16 22:12 ` Vineet Gupta 1 sibling, 1 reply; 12+ messages in thread From: Alexey Brodkin @ 2020-06-05 10:47 UTC (permalink / raw) To: Eugeniy Paltsev Cc: linux-kernel, Eugeniy Paltsev, linux-snps-arc, Vineet Gupta Hi Eugeniy, A couple of minor notes below. > -----Original Message----- > From: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> > Sent: Thursday, June 4, 2020 8:39 PM > To: linux-snps-arc@lists.infradead.org; Vineet Gupta <vgupta@synopsys.com> > Cc: linux-kernel@vger.kernel.org; Alexey Brodkin <abrodkin@synopsys.com>; Eugeniy Paltsev > <paltsev@synopsys.com> > Subject: [PATCH v2 1/4] ARC: allow to override default mcpu compiler flag > > Kernel builds set their own default -mcpu for a given ISA build. We used to use a default "-mcpu" per ARC ISA version (one for ARCompact and one for ARCv2). > But that gets in the way of "custom" -mcpu flags from propagating > into kernel build. But with more versions of CPUs & SoCs becoming available we want to be able to fine-tune generated code more precise. > This will also be used in next patches for HSDK-4xD board support which > uses a different -mcpu to effect dual issue scheduling. "...for utilization of the new CPU's dual-issue capabilities"? > +++ b/arch/arc/Makefile > @@ -10,8 +10,25 @@ CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux-) > endif > > cflags-y += -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__ > -cflags-$(CONFIG_ISA_ARCOMPACT) += -mA7 > -cflags-$(CONFIG_ISA_ARCV2) += -mcpu=hs38 > + > +tune-mcpu-def-$(CONFIG_ISA_ARCOMPACT) := -mA7 I'd suggest to either swap "-mA7" which is being obsoleted with "-mcpu=arc700" right here or as a separate change, otherwise we may soon get ATC700 builds broken with newer compilers. -Alexey ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v2 1/4] ARC: allow to override default mcpu compiler flag 2020-06-05 10:47 ` Alexey Brodkin @ 2020-06-16 22:12 ` Vineet Gupta 0 siblings, 0 replies; 12+ messages in thread From: Vineet Gupta @ 2020-06-16 22:12 UTC (permalink / raw) To: Alexey Brodkin, Eugeniy Paltsev; +Cc: linux-snps-arc, linux-kernel On 6/5/20 3:47 AM, Alexey Brodkin wrote: > Hi Eugeniy, > > A couple of minor notes below. > >> -----Original Message----- >> From: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> >> Sent: Thursday, June 4, 2020 8:39 PM >> To: linux-snps-arc@lists.infradead.org; Vineet Gupta <vgupta@synopsys.com> >> Cc: linux-kernel@vger.kernel.org; Alexey Brodkin <abrodkin@synopsys.com>; Eugeniy Paltsev >> <paltsev@synopsys.com> >> Subject: [PATCH v2 1/4] ARC: allow to override default mcpu compiler flag >> >> Kernel builds set their own default -mcpu for a given ISA build. > > We used to use a default "-mcpu" per ARC ISA version (one for ARCompact > and one for ARCv2). > >> But that gets in the way of "custom" -mcpu flags from propagating >> into kernel build. > > But with more versions of CPUs & SoCs becoming available we want to > be able to fine-tune generated code more precise. > >> This will also be used in next patches for HSDK-4xD board support which >> uses a different -mcpu to effect dual issue scheduling. > > "...for utilization of the new CPU's dual-issue capabilities"? > >> +++ b/arch/arc/Makefile >> @@ -10,8 +10,25 @@ CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux-) >> endif >> >> cflags-y += -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__ >> -cflags-$(CONFIG_ISA_ARCOMPACT) += -mA7 >> -cflags-$(CONFIG_ISA_ARCV2) += -mcpu=hs38 >> + >> +tune-mcpu-def-$(CONFIG_ISA_ARCOMPACT) := -mA7 > > I'd suggest to either swap "-mA7" which is being obsoleted with "-mcpu=arc700" > right here or as a separate change, otherwise we may soon get ATC700 builds > broken with newer compilers. FWIW I've added a modified variant of this patch to for-curr as we need it for ongoing ARC64 port as well. -Vineet ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 2/4] ARC: ARCv2: support loop buffer (LPB) disabling 2020-06-04 17:39 [PATCH v2 0/4] ARC: [plat-hsdk-4xd] initial port for HSDK-4xD board Eugeniy Paltsev 2020-06-04 17:39 ` [PATCH v2 1/4] ARC: allow to override default mcpu compiler flag Eugeniy Paltsev @ 2020-06-04 17:39 ` Eugeniy Paltsev 2020-06-18 19:50 ` Eugeniy Paltsev 2020-06-04 17:39 ` [PATCH v2 3/4] ARC: [plat-hsdk-4xd] initial port for HSDK-4xD board Eugeniy Paltsev ` (2 subsequent siblings) 4 siblings, 1 reply; 12+ messages in thread From: Eugeniy Paltsev @ 2020-06-04 17:39 UTC (permalink / raw) To: linux-snps-arc, Vineet Gupta Cc: linux-kernel, Alexey Brodkin, Eugeniy Paltsev On HS cores, loop buffer (LPB) is programmable in runtime and can be optionally disabled. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> --- arch/arc/Kconfig | 6 ++++++ arch/arc/kernel/head.S | 8 ++++++++ 2 files changed, 14 insertions(+) diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 7034c217708f..2dc142c8e1f5 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -473,6 +473,12 @@ config ARC_IRQ_NO_AUTOSAVE This is programmable and can be optionally disabled in which case software INTERRUPT_PROLOGUE/EPILGUE do the needed work +config ARC_LPB_DISABLE + bool "Disable loop buffer (LPB)" + help + On HS cores, loop buffer (LPB) is programmable in runtime and can + be optionally disabled. + endif # ISA_ARCV2 endmenu # "ARC CPU Configuration" diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S index 6eb23f1545ee..17fd1ed700cc 100644 --- a/arch/arc/kernel/head.S +++ b/arch/arc/kernel/head.S @@ -59,6 +59,14 @@ bclr r5, r5, STATUS_AD_BIT #endif kflag r5 + +#ifdef CONFIG_ARC_LPB_DISABLE + lr r5, [ARC_REG_LPB_BUILD] + breq r5, 0, 1f ; LPB doesn't exist + mov r5, 1 + sr r5, [ARC_REG_LPB_CTRL] +1: +#endif /* CONFIG_ARC_LPB_DISABLE */ #endif ; Config DSP_CTRL properly, so kernel may use integer multiply, ; multiply-accumulate, and divide operations -- 2.21.3 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v2 2/4] ARC: ARCv2: support loop buffer (LPB) disabling 2020-06-04 17:39 ` [PATCH v2 2/4] ARC: ARCv2: support loop buffer (LPB) disabling Eugeniy Paltsev @ 2020-06-18 19:50 ` Eugeniy Paltsev 2020-06-18 20:00 ` Vineet Gupta 0 siblings, 1 reply; 12+ messages in thread From: Eugeniy Paltsev @ 2020-06-18 19:50 UTC (permalink / raw) To: Eugeniy Paltsev, linux-snps-arc, Vineet Gupta Cc: linux-kernel, Alexey Brodkin Hi Vineet, could you also peek this patch to for-curr as we don't have any disagreement about it? I'll respin the rest of the patches later. Thanks. --- Eugeniy Paltsev ________________________________________ From: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Sent: Thursday, June 4, 2020 20:39 To: linux-snps-arc@lists.infradead.org; Vineet Gupta Cc: linux-kernel@vger.kernel.org; Alexey Brodkin; Eugeniy Paltsev Subject: [PATCH v2 2/4] ARC: ARCv2: support loop buffer (LPB) disabling On HS cores, loop buffer (LPB) is programmable in runtime and can be optionally disabled. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> --- arch/arc/Kconfig | 6 ++++++ arch/arc/kernel/head.S | 8 ++++++++ 2 files changed, 14 insertions(+) diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 7034c217708f..2dc142c8e1f5 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -473,6 +473,12 @@ config ARC_IRQ_NO_AUTOSAVE This is programmable and can be optionally disabled in which case software INTERRUPT_PROLOGUE/EPILGUE do the needed work +config ARC_LPB_DISABLE + bool "Disable loop buffer (LPB)" + help + On HS cores, loop buffer (LPB) is programmable in runtime and can + be optionally disabled. + endif # ISA_ARCV2 endmenu # "ARC CPU Configuration" diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S index 6eb23f1545ee..17fd1ed700cc 100644 --- a/arch/arc/kernel/head.S +++ b/arch/arc/kernel/head.S @@ -59,6 +59,14 @@ bclr r5, r5, STATUS_AD_BIT #endif kflag r5 + +#ifdef CONFIG_ARC_LPB_DISABLE + lr r5, [ARC_REG_LPB_BUILD] + breq r5, 0, 1f ; LPB doesn't exist + mov r5, 1 + sr r5, [ARC_REG_LPB_CTRL] +1: +#endif /* CONFIG_ARC_LPB_DISABLE */ #endif ; Config DSP_CTRL properly, so kernel may use integer multiply, ; multiply-accumulate, and divide operations -- 2.21.3 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v2 2/4] ARC: ARCv2: support loop buffer (LPB) disabling 2020-06-18 19:50 ` Eugeniy Paltsev @ 2020-06-18 20:00 ` Vineet Gupta 0 siblings, 0 replies; 12+ messages in thread From: Vineet Gupta @ 2020-06-18 20:00 UTC (permalink / raw) To: Eugeniy Paltsev, linux-snps-arc; +Cc: linux-kernel, Alexey Brodkin On 6/18/20 12:50 PM, Eugeniy Paltsev wrote: > Hi Vineet, > > could you also peek this patch to for-curr as we don't have any disagreement about it? > > I'll respin the rest of the patches later. Thanks. > --- > Eugeniy Paltsev Added ! -Vineet ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 3/4] ARC: [plat-hsdk-4xd] initial port for HSDK-4xD board 2020-06-04 17:39 [PATCH v2 0/4] ARC: [plat-hsdk-4xd] initial port for HSDK-4xD board Eugeniy Paltsev 2020-06-04 17:39 ` [PATCH v2 1/4] ARC: allow to override default mcpu compiler flag Eugeniy Paltsev 2020-06-04 17:39 ` [PATCH v2 2/4] ARC: ARCv2: support loop buffer (LPB) disabling Eugeniy Paltsev @ 2020-06-04 17:39 ` Eugeniy Paltsev 2020-06-04 22:02 ` Rob Herring 2020-06-04 17:39 ` [PATCH v2 4/4] ARC: [plat-hsdk*] document HSDK-4xD board/SoC bindings Eugeniy Paltsev 2020-06-04 20:00 ` [PATCH v2 0/4] ARC: [plat-hsdk-4xd] initial port for HSDK-4xD board Vineet Gupta 4 siblings, 1 reply; 12+ messages in thread From: Eugeniy Paltsev @ 2020-06-04 17:39 UTC (permalink / raw) To: linux-snps-arc, Vineet Gupta Cc: linux-kernel, Alexey Brodkin, Eugeniy Paltsev, Rob Herring This initial port adds support of ARC HS4x/HS4xD Development Kit board with some basic features such serial port, USB, SD/MMC, SPI flash, Ethernet and others. The HSDK-4xD board has much in common with its predecessor - HSDK board. However HSDK-4xD has some differences in comparison with its predecessor: * based on quad core ARC HS48/HS47D processor (instead of quad core ARC HS38) * has ThinkSilicon GPU (instead of Vivante GPU) * has ARC PGU and HDMI output * has separate SDIO controller for WiFi module * has additional timers with clocksource independent from CPU clocksource (required for DVFS) * has performance counters interrupt * other minor stuff NOTE: HSDK-4xD and HSDK may share part of DTS so we can move this common part to one .dtsi file (as we have done it in U-boot). However we have quite enough out of the tree patches for tweaking HSDK DTS (patches in out Linux kernel verification flow, patches for run in simulation, etc...), so I'd prefer to keep HSDK DTS untouched. That's why HSDK-4xD DTS is created as an separate file. Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> --- arch/arc/boot/dts/hsdk-4xd.dts | 322 ++++++++++++++++++++++++++++ arch/arc/configs/hsdk_4xd_defconfig | 98 +++++++++ arch/arc/kernel/devtree.c | 1 + arch/arc/plat-hsdk/Kconfig | 3 +- arch/arc/plat-hsdk/platform.c | 1 + 5 files changed, 424 insertions(+), 1 deletion(-) create mode 100644 arch/arc/boot/dts/hsdk-4xd.dts create mode 100644 arch/arc/configs/hsdk_4xd_defconfig diff --git a/arch/arc/boot/dts/hsdk-4xd.dts b/arch/arc/boot/dts/hsdk-4xd.dts new file mode 100644 index 000000000000..2b7f76a01e3e --- /dev/null +++ b/arch/arc/boot/dts/hsdk-4xd.dts @@ -0,0 +1,322 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2020 Synopsys, Inc. (www.synopsys.com) + */ + +/* + * Device Tree for ARC HS4x/HS4xD Development Kit + */ +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/reset/snps,hsdk-reset.h> + +/ { + model = "snps,hsdk-4xd"; + compatible = "snps,hsdk-4xd"; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0xf0005000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1"; + }; + + aliases { + ethernet = &gmac; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "snps,archs48"; + reg = <0>; + clocks = <&core_clk>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "snps,archs48"; + reg = <1>; + clocks = <&core_clk>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "snps,archs48"; + reg = <2>; + clocks = <&core_clk>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "snps,archs48"; + reg = <3>; + clocks = <&core_clk>; + }; + }; + + input_clk: input-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <33333333>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + + regulator-name = "5v0-supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + cpu_intc: cpu-interrupt-controller { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + idu_intc: idu-interrupt-controller { + compatible = "snps,archs-idu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&cpu_intc>; + }; + + arcpct: pct { + compatible = "snps,archs-pct"; + interrupt-parent = <&cpu_intc>; + interrupts = <20>; + }; + + /* TIMER0 with interrupt for clockevent */ + timer { + compatible = "snps,arc-timer"; + interrupts = <16>; + interrupt-parent = <&cpu_intc>; + clocks = <&core_clk>; + }; + + /* 64-bit Global Free Running Counter */ + gfrc { + compatible = "snps,archs-timer-gfrc"; + clocks = <&core_clk>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&idu_intc>; + + ranges = <0x00000000 0x0 0xf0000000 0x10000000>; + + cgu_rst: reset-controller@8a0 { + compatible = "snps,hsdk-reset"; + #reset-cells = <1>; + reg = <0x8a0 0x4>, <0xff0 0x4>; + }; + + core_clk: core-clk@0 { + compatible = "snps,hsdk-core-pll-clock"; + reg = <0x00 0x10>, <0x14b8 0x4>; + #clock-cells = <0>; + clocks = <&input_clk>; + + /* + * Set initial core pll output frequency to 1GHz. + * It will be applied at the core pll driver probing + * on early boot. + */ + assigned-clocks = <&core_clk>; + assigned-clock-rates = <1000000000>; + }; + + serial: serial@5000 { + compatible = "snps,dw-apb-uart"; + reg = <0x5000 0x100>; + clock-frequency = <33330000>; + interrupts = <6>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + gmacclk: gmacclk { + compatible = "fixed-clock"; + clock-frequency = <400000000>; + #clock-cells = <0>; + }; + + mmcclk_ciu: mmcclk-ciu { + compatible = "fixed-clock"; + /* + * DW sdio controller has external ciu clock divider + * controlled via register in SDIO IP. Due to its + * unexpected default value (it should divide by 1 + * but it divides by 8) SDIO IP uses wrong clock and + * works unstable (see STAR 9001204800) + * We switched to the minimum possible value of the + * divisor (div-by-2) in HSDK platform code. + * So add temporary fix and change clock frequency + * to 50000000 Hz until we fix dw sdio driver itself. + */ + clock-frequency = <50000000>; + #clock-cells = <0>; + }; + + mmcclk_biu: mmcclk-biu { + compatible = "fixed-clock"; + clock-frequency = <400000000>; + #clock-cells = <0>; + }; + + dmac_core_clk: dmac-core-clk { + compatible = "fixed-clock"; + clock-frequency = <400000000>; + #clock-cells = <0>; + }; + + dmac_cfg_clk: dmac-gpu-cfg-clk { + compatible = "fixed-clock"; + clock-frequency = <200000000>; + #clock-cells = <0>; + }; + + gmac: ethernet@8000 { + #interrupt-cells = <1>; + compatible = "snps,dwmac"; + reg = <0x8000 0x2000>; + interrupts = <10>; + interrupt-names = "macirq"; + phy-mode = "rgmii"; + snps,pbl = <32>; + snps,multicast-filter-bins = <256>; + clocks = <&gmacclk>; + clock-names = "stmmaceth"; + phy-handle = <&phy0>; + resets = <&cgu_rst HSDK_ETH_RESET>; + reset-names = "stmmaceth"; + mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */ + dma-coherent; + + tx-fifo-depth = <4096>; + rx-fifo-depth = <4096>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + }; + + ohci@60000 { + compatible = "snps,hsdk-v1.0-ohci", "generic-ohci"; + reg = <0x60000 0x100>; + interrupts = <15>; + resets = <&cgu_rst HSDK_USB_RESET>; + dma-coherent; + }; + + ehci@40000 { + compatible = "snps,hsdk-v1.0-ehci", "generic-ehci"; + reg = <0x40000 0x100>; + interrupts = <15>; + resets = <&cgu_rst HSDK_USB_RESET>; + dma-coherent; + }; + + mmc@a000 { + compatible = "altr,socfpga-dw-mshc"; + reg = <0xa000 0x400>; + num-slots = <1>; + fifo-depth = <16>; + card-detect-delay = <200>; + clocks = <&mmcclk_biu>, <&mmcclk_ciu>; + clock-names = "biu", "ciu"; + interrupts = <12>; + bus-width = <4>; + dma-coherent; + }; + + spi0: spi@20000 { + compatible = "snps,dw-apb-ssi"; + reg = <0x20000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <16>; + num-cs = <2>; + reg-io-width = <4>; + clocks = <&input_clk>; + cs-gpios = <&creg_gpio 0 GPIO_ACTIVE_LOW>, + <&creg_gpio 1 GPIO_ACTIVE_LOW>; + + spi-flash@0 { + compatible = "sst26wf016b", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <4000000>; + }; + + adc@1 { + compatible = "ti,adc108s102"; + reg = <1>; + vref-supply = <®_5v0>; + spi-max-frequency = <1000000>; + }; + }; + + creg_gpio: gpio@14b0 { + compatible = "snps,creg-gpio-hsdk"; + reg = <0x14b0 0x4>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <2>; + }; + + gpio: gpio@3000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x3000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + + gpio_port_a: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <24>; + reg = <0>; + }; + }; + + dmac: dmac@80000 { + compatible = "snps,axi-dma-1.01a"; + reg = <0x80000 0x400>; + interrupts = <27>; + clocks = <&dmac_core_clk>, <&dmac_cfg_clk>; + clock-names = "core-clk", "cfgr-clk"; + + dma-channels = <4>; + snps,dma-masters = <2>; + snps,data-width = <3>; + snps,block-size = <4096 4096 4096 4096>; + snps,priority = <0 1 2 3>; + snps,axi-max-burst-len = <16>; + }; + }; + + memory@80000000 { + #address-cells = <2>; + #size-cells = <2>; + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x40000000>; /* 1 GB lowmem */ + /* 0x1 0x00000000 0x0 0x40000000>; 1 GB highmem */ + }; +}; diff --git a/arch/arc/configs/hsdk_4xd_defconfig b/arch/arc/configs/hsdk_4xd_defconfig new file mode 100644 index 000000000000..7f6bdb848400 --- /dev/null +++ b/arch/arc/configs/hsdk_4xd_defconfig @@ -0,0 +1,98 @@ +CONFIG_SYSVIPC=y +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y +CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +CONFIG_ARC_SOC_HSDK=y +CONFIG_SMP=y +CONFIG_ARC_TUNE_MCPU="-mcpu=hs4x_rel31" +CONFIG_ARC_DSP_KERNEL=y +CONFIG_LINUX_LINK_BASE=0x90000000 +CONFIG_LINUX_RAM_BASE=0x80000000 +CONFIG_ARC_BUILTIN_DTB_NAME="hsdk-4xd" +CONFIG_JUMP_LABEL=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_COMPACTION is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_DEVTMPFS=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_MTD=y +CONFIG_MTD_SPI_NOR=y +CONFIG_BLK_DEV_RAM=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_NETDEVICES=y +CONFIG_STMMAC_ETH=y +CONFIG_MICREL_PHY=y +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +CONFIG_SPI=y +CONFIG_SPI_DESIGNWARE=y +CONFIG_SPI_DW_MMIO=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_DWAPB=y +CONFIG_GPIO_SNPS_CREG=y +# CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_DRM=y +# CONFIG_DRM_FBDEV_EMULATION is not set +CONFIG_DRM_UDL=y +CONFIG_FB=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_DW=y +CONFIG_DMADEVICES=y +CONFIG_DW_AXI_DMAC=y +CONFIG_IIO=y +CONFIG_TI_ADC108S102=y +CONFIG_EXT3_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_CRYPTO_ECHAINIV=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_STRIP_ASM_SYMS=y +CONFIG_SOFTLOCKUP_DETECTOR=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_FTRACE is not set diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c index fa86d13df5ed..81f881af7356 100644 --- a/arch/arc/kernel/devtree.c +++ b/arch/arc/kernel/devtree.c @@ -27,6 +27,7 @@ static void __init arc_set_early_base_baud(unsigned long dt_root) if (of_flat_dt_is_compatible(dt_root, "abilis,arc-tb10x")) arc_base_baud = 166666666; /* Fixed 166.6MHz clk (TB10x) */ else if (of_flat_dt_is_compatible(dt_root, "snps,arc-sdp") || + of_flat_dt_is_compatible(dt_root, "snps,hsdk-4xd") || of_flat_dt_is_compatible(dt_root, "snps,hsdk")) arc_base_baud = 33333333; /* Fixed 33MHz clk (AXS10x & HSDK) */ else if (of_flat_dt_is_compatible(dt_root, "ezchip,arc-nps")) diff --git a/arch/arc/plat-hsdk/Kconfig b/arch/arc/plat-hsdk/Kconfig index ce8101834518..bde310b9ee17 100644 --- a/arch/arc/plat-hsdk/Kconfig +++ b/arch/arc/plat-hsdk/Kconfig @@ -3,10 +3,11 @@ # menuconfig ARC_SOC_HSDK - bool "ARC HS Development Kit SOC" + bool "ARC HSDK or HSDK-4xD SoCs" depends on ISA_ARCV2 select ARC_HAS_ACCL_REGS select ARC_IRQ_NO_AUTOSAVE + select ARC_LPB_DISABLE select CLK_HSDK select RESET_HSDK select HAVE_PCI diff --git a/arch/arc/plat-hsdk/platform.c b/arch/arc/plat-hsdk/platform.c index 0b961a2a10b8..fddb9bae6add 100644 --- a/arch/arc/plat-hsdk/platform.c +++ b/arch/arc/plat-hsdk/platform.c @@ -332,6 +332,7 @@ static void __init hsdk_init_early(void) } static const char *hsdk_compat[] __initconst = { + "snps,hsdk-4xd", "snps,hsdk", NULL, }; -- 2.21.3 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v2 3/4] ARC: [plat-hsdk-4xd] initial port for HSDK-4xD board 2020-06-04 17:39 ` [PATCH v2 3/4] ARC: [plat-hsdk-4xd] initial port for HSDK-4xD board Eugeniy Paltsev @ 2020-06-04 22:02 ` Rob Herring 0 siblings, 0 replies; 12+ messages in thread From: Rob Herring @ 2020-06-04 22:02 UTC (permalink / raw) To: Eugeniy Paltsev; +Cc: arcml, Vineet Gupta, linux-kernel, Alexey Brodkin On Thu, Jun 4, 2020 at 11:39 AM Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> wrote: > Need to cc the DT list. > This initial port adds support of ARC HS4x/HS4xD Development Kit board > with some basic features such serial port, USB, SD/MMC, SPI flash, > Ethernet and others. > > The HSDK-4xD board has much in common with its predecessor - HSDK board. > However HSDK-4xD has some differences in comparison with its predecessor: > * based on quad core ARC HS48/HS47D processor (instead of quad core > ARC HS38) > * has ThinkSilicon GPU (instead of Vivante GPU) > * has ARC PGU and HDMI output > * has separate SDIO controller for WiFi module > * has additional timers with clocksource independent from CPU clocksource > (required for DVFS) > * has performance counters interrupt > * other minor stuff > > NOTE: > HSDK-4xD and HSDK may share part of DTS so we can move this common part > to one .dtsi file (as we have done it in U-boot). However we have quite > enough out of the tree patches for tweaking HSDK DTS (patches in out > Linux kernel verification flow, patches for run in simulation, etc...), > so I'd prefer to keep HSDK DTS untouched. That's why HSDK-4xD DTS is > created as an separate file. > > Cc: Rob Herring <robh+dt@kernel.org> > Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> > --- > arch/arc/boot/dts/hsdk-4xd.dts | 322 ++++++++++++++++++++++++++++ Please check this using W=1 and also build 'dtbs_check' (which needs dt-schema installed). > arch/arc/configs/hsdk_4xd_defconfig | 98 +++++++++ > arch/arc/kernel/devtree.c | 1 + > arch/arc/plat-hsdk/Kconfig | 3 +- > arch/arc/plat-hsdk/platform.c | 1 + > 5 files changed, 424 insertions(+), 1 deletion(-) > create mode 100644 arch/arc/boot/dts/hsdk-4xd.dts > create mode 100644 arch/arc/configs/hsdk_4xd_defconfig > > diff --git a/arch/arc/boot/dts/hsdk-4xd.dts b/arch/arc/boot/dts/hsdk-4xd.dts > new file mode 100644 > index 000000000000..2b7f76a01e3e > --- /dev/null > +++ b/arch/arc/boot/dts/hsdk-4xd.dts > @@ -0,0 +1,322 @@ > +// SPDX-License-Identifier: GPL-2.0-only Don't care about non-GPL OS's? > +/* > + * Copyright (C) 2020 Synopsys, Inc. (www.synopsys.com) > + */ > + > +/* > + * Device Tree for ARC HS4x/HS4xD Development Kit > + */ > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/reset/snps,hsdk-reset.h> > + > +/ { > + model = "snps,hsdk-4xd"; > + compatible = "snps,hsdk-4xd"; > + > + #address-cells = <2>; > + #size-cells = <2>; > + > + chosen { > + bootargs = "earlycon=uart8250,mmio32,0xf0005000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1"; You shouldn't really put debug options here like 'earlycon'. Also, use 'stdout-path' instead for the console. > + }; > + > + aliases { > + ethernet = &gmac; > + }; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpu@0 { > + device_type = "cpu"; > + compatible = "snps,archs48"; Not documented. > + reg = <0>; > + clocks = <&core_clk>; > + }; > + > + cpu@1 { > + device_type = "cpu"; > + compatible = "snps,archs48"; > + reg = <1>; > + clocks = <&core_clk>; > + }; > + > + cpu@2 { > + device_type = "cpu"; > + compatible = "snps,archs48"; > + reg = <2>; > + clocks = <&core_clk>; > + }; > + > + cpu@3 { > + device_type = "cpu"; > + compatible = "snps,archs48"; > + reg = <3>; > + clocks = <&core_clk>; > + }; > + }; > + > + input_clk: input-clk { > + #clock-cells = <0>; > + compatible = "fixed-clock"; > + clock-frequency = <33333333>; > + }; > + > + reg_5v0: regulator-5v0 { > + compatible = "regulator-fixed"; > + > + regulator-name = "5v0-supply"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + }; > + > + cpu_intc: cpu-interrupt-controller { > + compatible = "snps,archs-intc"; > + interrupt-controller; > + #interrupt-cells = <1>; > + }; > + > + idu_intc: idu-interrupt-controller { > + compatible = "snps,archs-idu-intc"; > + interrupt-controller; > + #interrupt-cells = <1>; > + interrupt-parent = <&cpu_intc>; > + }; > + > + arcpct: pct { > + compatible = "snps,archs-pct"; > + interrupt-parent = <&cpu_intc>; > + interrupts = <20>; > + }; > + > + /* TIMER0 with interrupt for clockevent */ > + timer { > + compatible = "snps,arc-timer"; > + interrupts = <16>; > + interrupt-parent = <&cpu_intc>; > + clocks = <&core_clk>; > + }; > + > + /* 64-bit Global Free Running Counter */ > + gfrc { > + compatible = "snps,archs-timer-gfrc"; > + clocks = <&core_clk>; > + }; > + > + soc { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + interrupt-parent = <&idu_intc>; > + > + ranges = <0x00000000 0x0 0xf0000000 0x10000000>; > + > + cgu_rst: reset-controller@8a0 { > + compatible = "snps,hsdk-reset"; > + #reset-cells = <1>; > + reg = <0x8a0 0x4>, <0xff0 0x4>; > + }; > + > + core_clk: core-clk@0 { Should be: clock-controller@10 > + compatible = "snps,hsdk-core-pll-clock"; > + reg = <0x00 0x10>, <0x14b8 0x4>; > + #clock-cells = <0>; > + clocks = <&input_clk>; > + > + /* > + * Set initial core pll output frequency to 1GHz. > + * It will be applied at the core pll driver probing > + * on early boot. > + */ > + assigned-clocks = <&core_clk>; > + assigned-clock-rates = <1000000000>; > + }; > + > + serial: serial@5000 { > + compatible = "snps,dw-apb-uart"; > + reg = <0x5000 0x100>; > + clock-frequency = <33330000>; > + interrupts = <6>; > + baud = <115200>; > + reg-shift = <2>; > + reg-io-width = <4>; > + }; > + > + gmacclk: gmacclk { > + compatible = "fixed-clock"; > + clock-frequency = <400000000>; > + #clock-cells = <0>; > + }; > + > + mmcclk_ciu: mmcclk-ciu { > + compatible = "fixed-clock"; > + /* > + * DW sdio controller has external ciu clock divider > + * controlled via register in SDIO IP. Due to its > + * unexpected default value (it should divide by 1 > + * but it divides by 8) SDIO IP uses wrong clock and > + * works unstable (see STAR 9001204800) > + * We switched to the minimum possible value of the > + * divisor (div-by-2) in HSDK platform code. > + * So add temporary fix and change clock frequency > + * to 50000000 Hz until we fix dw sdio driver itself. > + */ > + clock-frequency = <50000000>; > + #clock-cells = <0>; > + }; > + > + mmcclk_biu: mmcclk-biu { > + compatible = "fixed-clock"; > + clock-frequency = <400000000>; > + #clock-cells = <0>; > + }; > + > + dmac_core_clk: dmac-core-clk { > + compatible = "fixed-clock"; > + clock-frequency = <400000000>; > + #clock-cells = <0>; > + }; > + > + dmac_cfg_clk: dmac-gpu-cfg-clk { > + compatible = "fixed-clock"; > + clock-frequency = <200000000>; > + #clock-cells = <0>; > + }; > + > + gmac: ethernet@8000 { > + #interrupt-cells = <1>; > + compatible = "snps,dwmac"; > + reg = <0x8000 0x2000>; > + interrupts = <10>; > + interrupt-names = "macirq"; > + phy-mode = "rgmii"; > + snps,pbl = <32>; > + snps,multicast-filter-bins = <256>; > + clocks = <&gmacclk>; > + clock-names = "stmmaceth"; > + phy-handle = <&phy0>; > + resets = <&cgu_rst HSDK_ETH_RESET>; > + reset-names = "stmmaceth"; > + mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */ > + dma-coherent; > + > + tx-fifo-depth = <4096>; > + rx-fifo-depth = <4096>; > + > + mdio { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "snps,dwmac-mdio"; > + phy0: ethernet-phy@0 { > + reg = <0>; > + }; > + }; > + }; > + > + ohci@60000 { > + compatible = "snps,hsdk-v1.0-ohci", "generic-ohci"; > + reg = <0x60000 0x100>; > + interrupts = <15>; > + resets = <&cgu_rst HSDK_USB_RESET>; > + dma-coherent; > + }; > + > + ehci@40000 { > + compatible = "snps,hsdk-v1.0-ehci", "generic-ehci"; > + reg = <0x40000 0x100>; > + interrupts = <15>; > + resets = <&cgu_rst HSDK_USB_RESET>; > + dma-coherent; > + }; > + > + mmc@a000 { > + compatible = "altr,socfpga-dw-mshc"; > + reg = <0xa000 0x400>; > + num-slots = <1>; > + fifo-depth = <16>; > + card-detect-delay = <200>; > + clocks = <&mmcclk_biu>, <&mmcclk_ciu>; > + clock-names = "biu", "ciu"; > + interrupts = <12>; > + bus-width = <4>; > + dma-coherent; > + }; > + > + spi0: spi@20000 { > + compatible = "snps,dw-apb-ssi"; > + reg = <0x20000 0x100>; > + #address-cells = <1>; > + #size-cells = <0>; > + interrupts = <16>; > + num-cs = <2>; > + reg-io-width = <4>; > + clocks = <&input_clk>; > + cs-gpios = <&creg_gpio 0 GPIO_ACTIVE_LOW>, > + <&creg_gpio 1 GPIO_ACTIVE_LOW>; > + > + spi-flash@0 { > + compatible = "sst26wf016b", "jedec,spi-nor"; > + reg = <0>; > + #address-cells = <1>; > + #size-cells = <1>; > + spi-max-frequency = <4000000>; > + }; > + > + adc@1 { > + compatible = "ti,adc108s102"; > + reg = <1>; > + vref-supply = <®_5v0>; > + spi-max-frequency = <1000000>; > + }; > + }; > + > + creg_gpio: gpio@14b0 { > + compatible = "snps,creg-gpio-hsdk"; > + reg = <0x14b0 0x4>; > + gpio-controller; > + #gpio-cells = <2>; > + ngpios = <2>; > + }; > + > + gpio: gpio@3000 { > + compatible = "snps,dw-apb-gpio"; > + reg = <0x3000 0x20>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + gpio_port_a: gpio-controller@0 { > + compatible = "snps,dw-apb-gpio-port"; > + gpio-controller; > + #gpio-cells = <2>; > + snps,nr-gpios = <24>; > + reg = <0>; > + }; > + }; > + > + dmac: dmac@80000 { > + compatible = "snps,axi-dma-1.01a"; > + reg = <0x80000 0x400>; > + interrupts = <27>; > + clocks = <&dmac_core_clk>, <&dmac_cfg_clk>; > + clock-names = "core-clk", "cfgr-clk"; > + > + dma-channels = <4>; > + snps,dma-masters = <2>; > + snps,data-width = <3>; > + snps,block-size = <4096 4096 4096 4096>; > + snps,priority = <0 1 2 3>; > + snps,axi-max-burst-len = <16>; > + }; > + }; > + > + memory@80000000 { > + #address-cells = <2>; > + #size-cells = <2>; > + device_type = "memory"; > + reg = <0x0 0x80000000 0x0 0x40000000>; /* 1 GB lowmem */ > + /* 0x1 0x00000000 0x0 0x40000000>; 1 GB highmem */ > + }; > +}; > diff --git a/arch/arc/configs/hsdk_4xd_defconfig b/arch/arc/configs/hsdk_4xd_defconfig > new file mode 100644 > index 000000000000..7f6bdb848400 > --- /dev/null > +++ b/arch/arc/configs/hsdk_4xd_defconfig > @@ -0,0 +1,98 @@ > +CONFIG_SYSVIPC=y > +# CONFIG_CROSS_MEMORY_ATTACH is not set > +CONFIG_NO_HZ_IDLE=y > +CONFIG_HIGH_RES_TIMERS=y > +CONFIG_PREEMPT=y > +CONFIG_IKCONFIG=y > +CONFIG_IKCONFIG_PROC=y > +CONFIG_NAMESPACES=y > +# CONFIG_UTS_NS is not set > +# CONFIG_PID_NS is not set > +CONFIG_BLK_DEV_INITRD=y > +CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y > +CONFIG_EMBEDDED=y > +CONFIG_PERF_EVENTS=y > +# CONFIG_VM_EVENT_COUNTERS is not set > +# CONFIG_COMPAT_BRK is not set > +CONFIG_SLAB=y > +CONFIG_ARC_SOC_HSDK=y > +CONFIG_SMP=y > +CONFIG_ARC_TUNE_MCPU="-mcpu=hs4x_rel31" > +CONFIG_ARC_DSP_KERNEL=y > +CONFIG_LINUX_LINK_BASE=0x90000000 > +CONFIG_LINUX_RAM_BASE=0x80000000 > +CONFIG_ARC_BUILTIN_DTB_NAME="hsdk-4xd" > +CONFIG_JUMP_LABEL=y > +CONFIG_MODULES=y > +CONFIG_MODULE_UNLOAD=y > +# CONFIG_COMPACTION is not set > +CONFIG_NET=y > +CONFIG_PACKET=y > +CONFIG_UNIX=y > +CONFIG_INET=y > +CONFIG_DEVTMPFS=y > +# CONFIG_STANDALONE is not set > +# CONFIG_PREVENT_FIRMWARE_BUILD is not set > +CONFIG_MTD=y > +CONFIG_MTD_SPI_NOR=y > +CONFIG_BLK_DEV_RAM=y > +CONFIG_SCSI=y > +CONFIG_BLK_DEV_SD=y > +CONFIG_NETDEVICES=y > +CONFIG_STMMAC_ETH=y > +CONFIG_MICREL_PHY=y > +CONFIG_INPUT_EVDEV=y > +# CONFIG_INPUT_KEYBOARD is not set > +# CONFIG_INPUT_MOUSE is not set > +# CONFIG_SERIO is not set > +# CONFIG_LEGACY_PTYS is not set > +CONFIG_SERIAL_8250=y > +CONFIG_SERIAL_8250_CONSOLE=y > +CONFIG_SERIAL_8250_DW=y > +CONFIG_SERIAL_OF_PLATFORM=y > +# CONFIG_HW_RANDOM is not set > +CONFIG_SPI=y > +CONFIG_SPI_DESIGNWARE=y > +CONFIG_SPI_DW_MMIO=y > +CONFIG_GPIOLIB=y > +CONFIG_GPIO_SYSFS=y > +CONFIG_GPIO_DWAPB=y > +CONFIG_GPIO_SNPS_CREG=y > +# CONFIG_HWMON is not set > +CONFIG_THERMAL=y > +CONFIG_REGULATOR=y > +CONFIG_REGULATOR_FIXED_VOLTAGE=y > +CONFIG_DRM=y > +# CONFIG_DRM_FBDEV_EMULATION is not set > +CONFIG_DRM_UDL=y > +CONFIG_FB=y > +CONFIG_FRAMEBUFFER_CONSOLE=y > +CONFIG_USB=y > +CONFIG_USB_EHCI_HCD=y > +CONFIG_USB_EHCI_HCD_PLATFORM=y > +CONFIG_USB_OHCI_HCD=y > +CONFIG_USB_OHCI_HCD_PLATFORM=y > +CONFIG_USB_STORAGE=y > +CONFIG_MMC=y > +CONFIG_MMC_SDHCI=y > +CONFIG_MMC_SDHCI_PLTFM=y > +CONFIG_MMC_DW=y > +CONFIG_DMADEVICES=y > +CONFIG_DW_AXI_DMAC=y > +CONFIG_IIO=y > +CONFIG_TI_ADC108S102=y > +CONFIG_EXT3_FS=y > +CONFIG_VFAT_FS=y > +CONFIG_TMPFS=y > +CONFIG_NFS_FS=y > +CONFIG_NFS_V3_ACL=y > +CONFIG_NLS_CODEPAGE_437=y > +CONFIG_NLS_ISO8859_1=y > +CONFIG_CRYPTO_ECHAINIV=y > +# CONFIG_ENABLE_MUST_CHECK is not set > +CONFIG_STRIP_ASM_SYMS=y > +CONFIG_SOFTLOCKUP_DETECTOR=y > +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10 > +# CONFIG_SCHED_DEBUG is not set > +# CONFIG_DEBUG_PREEMPT is not set > +# CONFIG_FTRACE is not set > diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c > index fa86d13df5ed..81f881af7356 100644 > --- a/arch/arc/kernel/devtree.c > +++ b/arch/arc/kernel/devtree.c > @@ -27,6 +27,7 @@ static void __init arc_set_early_base_baud(unsigned long dt_root) > if (of_flat_dt_is_compatible(dt_root, "abilis,arc-tb10x")) > arc_base_baud = 166666666; /* Fixed 166.6MHz clk (TB10x) */ > else if (of_flat_dt_is_compatible(dt_root, "snps,arc-sdp") || > + of_flat_dt_is_compatible(dt_root, "snps,hsdk-4xd") || > of_flat_dt_is_compatible(dt_root, "snps,hsdk")) > arc_base_baud = 33333333; /* Fixed 33MHz clk (AXS10x & HSDK) */ > else if (of_flat_dt_is_compatible(dt_root, "ezchip,arc-nps")) > diff --git a/arch/arc/plat-hsdk/Kconfig b/arch/arc/plat-hsdk/Kconfig > index ce8101834518..bde310b9ee17 100644 > --- a/arch/arc/plat-hsdk/Kconfig > +++ b/arch/arc/plat-hsdk/Kconfig > @@ -3,10 +3,11 @@ > # > > menuconfig ARC_SOC_HSDK > - bool "ARC HS Development Kit SOC" > + bool "ARC HSDK or HSDK-4xD SoCs" > depends on ISA_ARCV2 > select ARC_HAS_ACCL_REGS > select ARC_IRQ_NO_AUTOSAVE > + select ARC_LPB_DISABLE > select CLK_HSDK > select RESET_HSDK > select HAVE_PCI > diff --git a/arch/arc/plat-hsdk/platform.c b/arch/arc/plat-hsdk/platform.c > index 0b961a2a10b8..fddb9bae6add 100644 > --- a/arch/arc/plat-hsdk/platform.c > +++ b/arch/arc/plat-hsdk/platform.c > @@ -332,6 +332,7 @@ static void __init hsdk_init_early(void) > } > > static const char *hsdk_compat[] __initconst = { > + "snps,hsdk-4xd", > "snps,hsdk", > NULL, > }; > -- > 2.21.3 > ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 4/4] ARC: [plat-hsdk*] document HSDK-4xD board/SoC bindings 2020-06-04 17:39 [PATCH v2 0/4] ARC: [plat-hsdk-4xd] initial port for HSDK-4xD board Eugeniy Paltsev ` (2 preceding siblings ...) 2020-06-04 17:39 ` [PATCH v2 3/4] ARC: [plat-hsdk-4xd] initial port for HSDK-4xD board Eugeniy Paltsev @ 2020-06-04 17:39 ` Eugeniy Paltsev 2020-06-04 20:00 ` [PATCH v2 0/4] ARC: [plat-hsdk-4xd] initial port for HSDK-4xD board Vineet Gupta 4 siblings, 0 replies; 12+ messages in thread From: Eugeniy Paltsev @ 2020-06-04 17:39 UTC (permalink / raw) To: linux-snps-arc, Vineet Gupta Cc: linux-kernel, Alexey Brodkin, Eugeniy Paltsev, Rob Herring Add documentation for HSDK-4xD board/SoC bindings. While I'm at it convert HSDK board/SoC bindings to DT schema format using json-schema. Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> --- .../devicetree/bindings/arc/hsdk.txt | 7 ----- .../devicetree/bindings/arc/hsdk.yaml | 26 +++++++++++++++++++ 2 files changed, 26 insertions(+), 7 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arc/hsdk.txt create mode 100644 Documentation/devicetree/bindings/arc/hsdk.yaml diff --git a/Documentation/devicetree/bindings/arc/hsdk.txt b/Documentation/devicetree/bindings/arc/hsdk.txt deleted file mode 100644 index be50654bbf61..000000000000 --- a/Documentation/devicetree/bindings/arc/hsdk.txt +++ /dev/null @@ -1,7 +0,0 @@ -Synopsys DesignWare ARC HS Development Kit Device Tree Bindings ---------------------------------------------------------------------------- - -ARC HSDK Board with quad-core ARC HS38x4 in silicon. - -Required root node properties: - - compatible = "snps,hsdk"; diff --git a/Documentation/devicetree/bindings/arc/hsdk.yaml b/Documentation/devicetree/bindings/arc/hsdk.yaml new file mode 100644 index 000000000000..3a269423b3d3 --- /dev/null +++ b/Documentation/devicetree/bindings/arc/hsdk.yaml @@ -0,0 +1,26 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arc/hsdk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare ARC HS Development Kits device tree bindings. + +maintainers: + - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: ARC HS Development Kit based on quad core ARC HS38 + processor in silicon + items: + - const: snps,hsdk + - description: ARC HS4x/HS4xD Development Kit based on quad core + ARC HS48/HS47D processor in silicon + items: + - const: snps,hsdk-4xd + +... -- 2.21.3 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v2 0/4] ARC: [plat-hsdk-4xd] initial port for HSDK-4xD board 2020-06-04 17:39 [PATCH v2 0/4] ARC: [plat-hsdk-4xd] initial port for HSDK-4xD board Eugeniy Paltsev ` (3 preceding siblings ...) 2020-06-04 17:39 ` [PATCH v2 4/4] ARC: [plat-hsdk*] document HSDK-4xD board/SoC bindings Eugeniy Paltsev @ 2020-06-04 20:00 ` Vineet Gupta 4 siblings, 0 replies; 12+ messages in thread From: Vineet Gupta @ 2020-06-04 20:00 UTC (permalink / raw) To: Eugeniy Paltsev, linux-snps-arc; +Cc: linux-kernel, Alexey Brodkin On 6/4/20 10:39 AM, Eugeniy Paltsev wrote: > Changes v1->v2: > * Fallback to ISA default mcpu flag if custom one isn't supported by > compiler. > * Drop HSDK custom Kconfig options (choose between HSDK and HSDK-4xD) as > we don't need it (at least for now). Instead we select ARC_LPB_DISABLE > for both boards but it's totally OK as HSDK doesn't have LPB so > disabling will be skipped by BCR check in runtime. > * Add missing HSDK-4xD device tree bindings. Convert HSDK device tree > bindings to json-schema. > > Eugeniy Paltsev (4): > ARC: allow to override default mcpu compiler flag > ARC: ARCv2: support loop buffer (LPB) disabling > ARC: [plat-hsdk-4xd] initial port for HSDK-4xD board > ARC: [plat-hsdk*] document HSDK-4xD board/SoC bindings LTGM overall. Dropping of new Kconfig items is nice too. -Vineet ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2020-06-18 20:00 UTC | newest] Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-06-04 17:39 [PATCH v2 0/4] ARC: [plat-hsdk-4xd] initial port for HSDK-4xD board Eugeniy Paltsev 2020-06-04 17:39 ` [PATCH v2 1/4] ARC: allow to override default mcpu compiler flag Eugeniy Paltsev 2020-06-04 18:27 ` Vineet Gupta 2020-06-05 10:47 ` Alexey Brodkin 2020-06-16 22:12 ` Vineet Gupta 2020-06-04 17:39 ` [PATCH v2 2/4] ARC: ARCv2: support loop buffer (LPB) disabling Eugeniy Paltsev 2020-06-18 19:50 ` Eugeniy Paltsev 2020-06-18 20:00 ` Vineet Gupta 2020-06-04 17:39 ` [PATCH v2 3/4] ARC: [plat-hsdk-4xd] initial port for HSDK-4xD board Eugeniy Paltsev 2020-06-04 22:02 ` Rob Herring 2020-06-04 17:39 ` [PATCH v2 4/4] ARC: [plat-hsdk*] document HSDK-4xD board/SoC bindings Eugeniy Paltsev 2020-06-04 20:00 ` [PATCH v2 0/4] ARC: [plat-hsdk-4xd] initial port for HSDK-4xD board Vineet Gupta
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).