linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Benjamin Gaignard <benjamin.gaignard@st.com>
To: <robh+dt@kernel.org>, <mcoquelin.stm32@gmail.com>,
	<alexandre.torgue@st.com>, <linus.walleij@linaro.org>,
	<gregkh@linuxfoundation.org>
Cc: <linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <stefano.stabellini@xilinx.com>,
	<tomase@xilinx.com>, Benjamin Gaignard <benjamin.gaignard@st.com>
Subject: [PATCH v4 0/5] STM32 ETZPC bus controller
Date: Fri, 5 Jun 2020 10:33:43 +0200	[thread overview]
Message-ID: <20200605083348.13880-1-benjamin.gaignard@st.com> (raw)

STM32 Extended TrustZone Protection controller act like a firewall on the
platform bus. Depending of its configuration devices could be accessible
by the TrustZone, the co-processor or the non-secure world. ETZPC
configuration could evolve at runtime for example to switch a device from
non-secure world to co-processor.

The series introduce 'firewall' helpers to handle the new devices-tree
properties. These properties are not dedicated to ETZPC and will be reused
for STM32 next generation of bus controller.

version 4:
- use bus API

version 3:
- add description in firewall consumer bindings
- add Linus reviewed-by tag

version 2:
- fix unit name into st,stm32-etzpc.yaml example and DT


Benjamin Gaignard (5):
  dt-bindings: bus: Add firewall bindings
  bus: stm32: Introduce firewall controller helpers
  dt-bindings: bus: Add STM32 ETZPC firewall controller
  bus: stm32: Add stm32 ETZPC firewall bus controller
  ARM: dts: stm32: Use ETZPC firewall bus

 .../bindings/bus/stm32/firewall-consumer.yaml      |  36 +++
 .../bindings/bus/stm32/firewall-provider.yaml      |  18 ++
 .../bindings/bus/stm32/st,stm32-etzpc.yaml         |  46 ++++
 arch/arm/boot/dts/stm32mp151.dtsi                  |   7 +-
 drivers/bus/Kconfig                                |   2 +
 drivers/bus/Makefile                               |   2 +
 drivers/bus/stm32/Kconfig                          |  11 +
 drivers/bus/stm32/Makefile                         |   2 +
 drivers/bus/stm32/firewall.c                       | 251 +++++++++++++++++++++
 drivers/bus/stm32/firewall.h                       |  66 ++++++
 drivers/bus/stm32/stm32-etzpc.c                    | 163 +++++++++++++
 include/dt-bindings/bus/stm32/stm32-etzpc.h        |  90 ++++++++
 12 files changed, 692 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/bus/stm32/firewall-consumer.yaml
 create mode 100644 Documentation/devicetree/bindings/bus/stm32/firewall-provider.yaml
 create mode 100644 Documentation/devicetree/bindings/bus/stm32/st,stm32-etzpc.yaml
 create mode 100644 drivers/bus/stm32/Kconfig
 create mode 100644 drivers/bus/stm32/Makefile
 create mode 100644 drivers/bus/stm32/firewall.c
 create mode 100644 drivers/bus/stm32/firewall.h
 create mode 100644 drivers/bus/stm32/stm32-etzpc.c
 create mode 100644 include/dt-bindings/bus/stm32/stm32-etzpc.h

-- 
2.15.0


             reply	other threads:[~2020-06-05  8:34 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-05  8:33 Benjamin Gaignard [this message]
2020-06-05  8:33 ` [PATCH v4 1/5] dt-bindings: bus: Add firewall bindings Benjamin Gaignard
2020-06-05  8:33 ` [PATCH v4 2/5] bus: stm32: Introduce firewall controller helpers Benjamin Gaignard
2020-06-05  8:33 ` [PATCH v4 3/5] dt-bindings: bus: Add STM32 ETZPC firewall controller Benjamin Gaignard
2020-06-05  8:33 ` [PATCH v4 4/5] bus: stm32: Add stm32 ETZPC firewall bus controller Benjamin Gaignard
2020-06-05  8:33 ` [PATCH v4 5/5] ARM: dts: stm32: Use ETZPC firewall bus Benjamin Gaignard
2020-07-01 13:25 [PATCH v4 0/5] STM32 ETZPC bus controller Benjamin Gaignard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200605083348.13880-1-benjamin.gaignard@st.com \
    --to=benjamin.gaignard@st.com \
    --cc=alexandre.torgue@st.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=stefano.stabellini@xilinx.com \
    --cc=tomase@xilinx.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).