From: Bjorn Helgaas <helgaas@kernel.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Rob Herring <robh@kernel.org>,
Kishon Vijay Abraham I <kishon@ti.com>
Subject: [GIT PULL] PCI changes for v5.8
Date: Fri, 5 Jun 2020 15:22:57 -0500 [thread overview]
Message-ID: <20200605202257.GA1152522@bjorn-Precision-5520> (raw)
The following changes since commit 8f3d9f354286745c751374f5f1fcafee6b3f3136:
Linux 5.7-rc1 (2020-04-12 12:35:55 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git tags/pci-v5.8-changes
for you to fetch changes up to 2bd81cd04a3f5eb873cc81fa16c469377be3b092:
Merge branch 'remotes/lorenzo/pci/vmd' (2020-06-04 12:59:20 -0500)
You should see two conflicts:
1) drivers/pci/quirks.c: conflict with my own for-linus branch; I
resolved by moving apex_pci_fixup_class() to the end so the two
PME-related quirks stay together.
2) Documentation/devicetree/bindings/pci/cdns-pcie.yaml: conflict
between Rob's 3d21a4609335 ("dt-bindings: Remove cases of 'allOf'
containing a '$ref'") and Kishon's fb5f8f3ca5f8 ("dt-bindings: PCI:
cadence: Deprecate inbound/outbound specific bindings").
Kishon moved a hunk from cdns-pcie.yaml to cdns-pcie-ep.yaml and
cdns-pcie-host.yaml, so I think the new homes need Rob's change:
Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
My resolution of these is below and at
https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/commit/?id=d1446bebeef8
diff --cc Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
index 000000000000,6150a7a7bdbf..016a5f61592d
mode 000000,100644..100644
--- a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
@@@ -1,0 -1,25 +1,24 @@@
+ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+ %YAML 1.2
+ ---
+ $id: "http://devicetree.org/schemas/pci/cdns-pcie-ep.yaml#"
+ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+ title: Cadence PCIe Device
+
+ maintainers:
+ - Tom Joseph <tjoseph@cadence.com>
+
+ allOf:
+ - $ref: "cdns-pcie.yaml#"
+
+ properties:
+ cdns,max-outbound-regions:
+ description: maximum number of outbound regions
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
++ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 32
+ default: 32
+
+ required:
+ - cdns,max-outbound-regions
diff --cc Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
index cb4e700c0269,3d64f85aeb39..303078a7b7a8
--- a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
@@@ -14,6 -14,15 +14,14 @@@ allOf
- $ref: "cdns-pcie.yaml#"
properties:
+ cdns,max-outbound-regions:
+ description: maximum number of outbound regions
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
++ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 32
+ default: 32
+ deprecated: true
+
cdns,no-bar-match-nbits:
description:
Set into the no BAR match register to configure the number of least
diff --cc drivers/pci/quirks.c
index ca9ed5774eb1,97df1f90160d..812bfc32ecb8
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@@ -5568,9 -5595,15 +5595,22 @@@ static void pci_fixup_no_d0_pme(struct
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASMEDIA, 0x2142, pci_fixup_no_d0_pme);
+ /*
+ * Device [12d8:0x400e] and [12d8:0x400f]
+ * These devices advertise PME# support in all power states but don't
+ * reliably assert it.
+ */
+ static void pci_fixup_no_pme(struct pci_dev *dev)
+ {
+ pci_info(dev, "PME# is unreliable, disabling it\n");
+ dev->pme_support = 0;
+ }
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_PERICOM, 0x400e, pci_fixup_no_pme);
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_PERICOM, 0x400f, pci_fixup_no_pme);
++
+static void apex_pci_fixup_class(struct pci_dev *pdev)
+{
+ pdev->class = (PCI_CLASS_SYSTEM_OTHER << 8) | pdev->class;
+}
+DECLARE_PCI_FIXUP_CLASS_HEADER(0x1ac1, 0x089a,
+ PCI_CLASS_NOT_DEFINED, 8, apex_pci_fixup_class);
----------------------------------------------------------------
Enumeration:
- Program MPS for RCiEP devices (Ashok Raj)
- Fix pci_register_host_bridge() device_register() error handling (Rob
Herring)
- Fix pci_host_bridge struct device release/free handling (Rob Herring)
Resource management:
- Allow resizing BARs for devices on root bus (Ard Biesheuvel)
Power management:
- Reduce Thunderbolt resume time by working around devices that don't
support DLL Link Active reporting (Mika Westerberg)
- Work around a Pericom USB controller OHCI/EHCI PME# defect (Kai-Heng
Feng)
Virtualization:
- Add ACS quirk for Intel Root Complex Integrated Endpoints (Ashok Raj)
- Avoid FLR for AMD Starship USB 3.0 (Kevin Buettner)
- Avoid FLR for AMD Matisse HD Audio & USB 3.0 (Marcos Scriven)
Error handling:
- Use only _OSC (not HEST FIRMWARE_FIRST) to determine AER ownership
(Alexandru Gagniuc, Kuppuswamy Sathyanarayanan)
- Reduce verbosity by logging only ACPI_NOTIFY_DISCONNECT_RECOVER events
(Kuppuswamy Sathyanarayanan)
- Don't enable AER by default in Kconfig (Bjorn Helgaas)
Peer-to-peer DMA:
- Add AMD Zen Raven and Renoir Root Ports to whitelist (Alex Deucher)
ASPM:
- Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges (Kai-Heng Feng)
Endpoint framework:
- Fix DMA channel release in test (Kunihiko Hayashi)
- Add page size as argument to pci_epc_mem_init() (Lad Prabhakar)
- Add support to handle multiple base for mapping outbound memory (Lad
Prabhakar)
Generic host bridge driver:
- Support building as module (Rob Herring)
- Eliminate pci_host_common_probe wrappers (Rob Herring)
Amlogic Meson PCIe controller driver:
- Don't use FAST_LINK_MODE to set up link (Marc Zyngier)
Broadcom STB PCIe controller driver:
- Disable ASPM L0s if 'aspm-no-l0s' in DT (Jim Quinlan)
- Fix clk_put() error (Jim Quinlan)
- Fix window register offset (Jim Quinlan)
- Assert fundamental reset on initialization (Nicolas Saenz Julienne)
- Add notify xHCI reset property (Nicolas Saenz Julienne)
- Add init routine for Raspberry Pi 4 VL805 USB controller (Nicolas Saenz
Julienne)
- Sync with Raspberry Pi 4 firmware for VL805 initialization (Nicolas
Saenz Julienne)
Cadence PCIe controller driver:
- Remove "cdns,max-outbound-regions" DT property (replaced by "ranges")
(Kishon Vijay Abraham I)
- Read 32-bit (not 16-bit) Vendor ID/Device ID property from DT (Kishon
Vijay Abraham I)
Marvell Aardvark PCIe controller driver:
- Improve link training (Marek Behún)
- Add PHY support (Marek Behún)
- Add "phys", "max-link-speed", "reset-gpios" to dt-binding (Marek
Behún)
- Train link immediately after enabling training to work around detection
issues with some cards (Pali Rohár)
- Issue PERST via GPIO to work around detection issues (Pali Rohár)
- Don't blindly enable ASPM L0s (Pali Rohár)
- Replace custom macros by standard linux/pci_regs.h macros (Pali Rohár)
Microsoft Hyper-V host bridge driver:
- Fix probe failure path to release resource (Wei Hu)
- Retry PCI bus D0 entry on invalid device state for kdump (Wei Hu)
Renesas R-Car PCIe controller driver:
- Fix incorrect programming of OB windows (Andrew Murray)
- Add suspend/resume (Kazufumi Ikeda)
- Rename pcie-rcar.c to pcie-rcar-host.c (Lad Prabhakar)
- Add endpoint controller driver (Lad Prabhakar)
- Fix PCIEPAMR mask calculation (Lad Prabhakar)
- Add r8a77961 to DT binding (Yoshihiro Shimoda)
Socionext UniPhier Pro5 controller driver:
- Add endpoint controller driver (Kunihiko Hayashi)
Synopsys DesignWare PCIe controller driver:
- Program outbound ATU upper limit register (Alan Mikhak)
- Fix inner MSI IRQ domain registration (Marc Zyngier)
Miscellaneous:
- Check for platform_get_irq() failure consistently (negative return
means failure) (Aman Sharma)
- Fix several runtime PM get/put imbalances (Dinghao Liu)
- Use flexible-array and struct_size() helpers for code cleanup (Gustavo
A. R. Silva)
- Update & fix issues in bridge emulation of PCIe registers (Jon Derrick)
- Add macros for bridge window names (PCI_BRIDGE_IO_WINDOW, etc)
(Krzysztof Wilczyński)
- Work around Intel PCH MROMs that have invalid BARs (Xiaochun Lee)
----------------------------------------------------------------
Alan Mikhak (1):
PCI: dwc: Program outbound ATU upper limit register
Alex Deucher (1):
PCI/P2PDMA: Add AMD Zen Raven and Renoir Root Ports to whitelist
Alexandru Gagniuc (1):
PCI/AER: Use only _OSC to determine AER ownership
Aman Sharma (1):
PCI: Check for platform_get_irq() failure consistently
Andrew Murray (1):
PCI: rcar: Fix incorrect programming of OB windows
Ani Sinha (1):
PCI: pciehp: Remove unused EMI() and HP_SUPR_RM() macros
Ard Biesheuvel (1):
PCI: Allow pci_resize_resource() for devices on root bus
Ashok Raj (2):
PCI: Program MPS for RCiEP devices
PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints
Bjorn Helgaas (33):
PCI/PM: Call .bridge_d3() hook only if non-NULL
PCI: dra7xx: Don't select CONFIG_PCI_DRA7XX_HOST by default
PCI: keystone: Don't select CONFIG_PCI_KEYSTONE_HOST by default
PCI/AER: Don't select CONFIG_PCIEAER by default
driver core: platform: Clarify that IRQ 0 is invalid
PCI/PM: Adjust pcie_wait_for_link_delay() for caller delay
PCI/PTM: Inherit Switch Downstream Port PTM settings from Upstream Port
PCI/AER: Use "aer" variable for capability offset
Merge branch 'pci/aspm'
Merge branch 'pci/enumeration'
Merge branch 'pci/error'
Merge branch 'pci/hotplug'
Merge branch 'pci/kconfig'
Merge branch 'pci/misc'
Merge branch 'pci/p2pdma'
Merge branch 'pci/pm'
Merge branch 'pci/resource'
Merge branch 'pci/switchtec'
Merge branch 'pci/virtualization'
Merge branch 'remotes/lorenzo/pci/aardvark'
Merge branch 'remotes/lorenzo/pci/altera'
Merge branch 'remotes/lorenzo/pci/brcmstb'
Merge branch 'remotes/lorenzo/pci/cadence'
Merge branch 'remotes/lorenzo/pci/dwc'
Merge branch 'remotes/lorenzo/pci/endpoint'
Merge branch 'remotes/lorenzo/pci/host-generic'
Merge branch 'remotes/lorenzo/pci/hv'
Merge branch 'remotes/lorenzo/pci/misc'
Merge branch 'remotes/lorenzo/pci/pci-bridge-emul'
Merge branch 'remotes/lorenzo/pci/rcar'
Merge branch 'remotes/lorenzo/pci/tegra'
Merge branch 'remotes/lorenzo/pci/v3-semi'
Merge branch 'remotes/lorenzo/pci/vmd'
Bryce Willey (1):
Documentation: PCI: Give unique labels to sections
Christophe JAILLET (1):
PCI: v3-semi: Fix a memory leak in v3_pci_probe() error handling paths
Colin Ian King (1):
PCI: altera: Clean up indentation issue on a return statement
Dinghao Liu (2):
PCI: tegra194: Fix runtime PM imbalance on error
PCI: tegra: Fix runtime PM imbalance on error
Gustavo A. R. Silva (2):
PCI: Replace zero-length array with flexible-array
PCI: hv: Use struct_size() helper
Jason Yan (1):
PCI: dwc: intel: Make intel_pcie_cpu_addr() static
Jay Fang (1):
PCI/PME: Fix kernel-doc of pcie_pme_resume() and pcie_pme_remove()
Jim Quinlan (4):
PCI: brcmstb: Don't clk_put() a managed clock
PCI: brcmstb: Fix window register offset from 4 to 8
dt-bindings: PCI: brcmstb: New prop 'aspm-no-l0s'
PCI: brcmstb: Disable L0s component of ASPM if requested
Jiri Slaby (1):
PCI: dwc: Clean up computing of msix_tbl
Jon Derrick (5):
PCI: pci-bridge-emul: Fix PCIe bit conflicts
PCI: pci-bridge-emul: Fix Root Cap/Status comment
PCI: pci-bridge-emul: Update for PCIe 5.0 r1.0
PCI: pci-bridge-emul: Eliminate the 'reserved' member
PCI: vmd: Filter resource type bits from shadow register
Kai-Heng Feng (3):
PCI/ASPM: Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges
serial: 8250_pci: Move Pericom IDs to pci_ids.h
PCI: Avoid Pericom USB controller OHCI/EHCI PME# defect
Kazufumi Ikeda (1):
PCI: rcar: Add suspend/resume
Kevin Buettner (1):
PCI: Avoid FLR for AMD Starship USB 3.0
Kishon Vijay Abraham I (4):
dt-bindings: PCI: cadence: Deprecate inbound/outbound specific bindings
PCI: cadence: Remove "cdns,max-outbound-regions" DT property
PCI: cadence: Fix to read 32-bit Vendor ID/Device ID property from DT
PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port
Krzysztof Wilczynski (4):
PCI/switchtec: Correct bool variable type assignment
PCI: shpchp: Make shpchp_unconfigure_device() void
PCI: Use bridge window names (PCI_BRIDGE_IO_WINDOW etc)
pcmcia: Use CardBus window names (PCI_CB_BRIDGE_IO_0_WINDOW etc) when freeing
Krzysztof Wilczyński (1):
PCI: Rename _DSM constants to align with spec
Kunihiko Hayashi (3):
PCI: endpoint: functions/pci-epf-test: Fix DMA channel release
dt-bindings: PCI: Add UniPhier PCIe endpoint controller description
PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver
Kuppuswamy Sathyanarayanan (4):
PCI/EDR: Log only ACPI_NOTIFY_DISCONNECT_RECOVER events
PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership
PCI/AER: Remove redundant pci_is_pcie() checks
PCI/AER: Remove redundant dev->aer_cap checks
Lad Prabhakar (8):
PCI: rcar: Rename pcie-rcar.c to pcie-rcar-host.c
PCI: rcar: Move shareable code to a common file
PCI: rcar: Fix calculating mask for PCIEPAMR register
PCI: endpoint: Pass page size as argument to pci_epc_mem_init()
PCI: endpoint: Add support to handle multiple base for mapping outbound memory
dt-bindings: PCI: rcar: Add bindings for R-Car PCIe endpoint controller
PCI: rcar: Add endpoint mode support
MAINTAINERS: Add file patterns for rcar PCI device tree bindings
Lukas Bulwahn (1):
MAINTAINERS: correct typo in new NXP LAYERSCAPE GEN4
Marc Zyngier (2):
PCI: dwc: Fix inner MSI IRQ domain registration
PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link
Marcos Scriven (1):
PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0
Marek Behún (3):
PCI: aardvark: Improve link training
PCI: aardvark: Add PHY support
dt-bindings: PCI: aardvark: Describe new properties
Mika Westerberg (1):
PCI/PM: Assume ports without DLL Link Active train links in 100 ms
Nicolas Saenz Julienne (5):
PCI: brcmstb: Assert fundamental reset on initialization
soc: bcm2835: Add notify xHCI reset property
firmware: raspberrypi: Introduce vl805 init routine
PCI: brcmstb: Wait for Raspberry Pi's firmware when present
USB: pci-quirks: Add Raspberry Pi 4 quirk
Pali Rohár (7):
PCI: tegra: Fix reporting GPIO error value
PCI: aardvark: Train link immediately after enabling training
PCI: aardvark: Don't blindly enable ASPM L0s and don't write to read-only register
PCI: of: Zero max-link-speed value is invalid
PCI: aardvark: Issue PERST via GPIO
PCI: aardvark: Add FIXME comment for PCIE_CORE_CMD_STATUS_REG access
PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros
Rob Herring (6):
PCI: Use of_node_name_eq() for node name comparisons
PCI: Constify struct pci_ecam_ops
PCI: host-generic: Support building as modules
PCI: host-generic: Eliminate pci_host_common_probe wrappers
PCI: Fix pci_register_host_bridge() device_register() error handling
PCI: Fix pci_host_bridge struct device release/free handling
Wei Hu (2):
PCI: hv: Fix the PCI HyperV probe failure path to release resource properly
PCI: hv: Retry PCI bus D0 entry on invalid device state
Wei Liu (1):
x86/PCI: Drop unused xen_register_pirq() gsi_override parameter
Wei Yongjun (1):
PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname()
Xiaochun Lee (1):
x86/PCI: Mark Intel C620 MROMs as having non-compliant BARs
Yicong Yang (2):
PCI: Unify pcie_find_root_port() and pci_find_pcie_root_port()
PCI/DPC: Print IRQ number used by port
Yoshihiro Shimoda (1):
dt-bindings: pci: rcar: add r8a77961 support
Zou Wei (1):
PCI: dwc: Make hisi_pcie_platform_ops static
Documentation/PCI/endpoint/pci-endpoint.rst | 16 +-
.../devicetree/bindings/pci/aardvark-pci.txt | 4 +
.../devicetree/bindings/pci/brcm,stb-pcie.yaml | 2 +
.../devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml | 2 +-
.../bindings/pci/cdns,cdns-pcie-host.yaml | 3 +-
.../devicetree/bindings/pci/cdns-pcie-ep.yaml | 25 +
.../devicetree/bindings/pci/cdns-pcie-host.yaml | 10 +
.../devicetree/bindings/pci/cdns-pcie.yaml | 8 -
.../devicetree/bindings/pci/rcar-pci-ep.yaml | 77 ++
Documentation/devicetree/bindings/pci/rcar-pci.txt | 3 +-
.../bindings/pci/socionext,uniphier-pcie-ep.yaml | 92 ++
MAINTAINERS | 7 +-
arch/arm64/kernel/pci.c | 4 +-
arch/x86/pci/fixup.c | 4 +
arch/x86/pci/xen.c | 16 +-
drivers/acpi/pci_mcfg.c | 8 +-
drivers/acpi/pci_root.c | 11 +-
drivers/base/platform.c | 40 +-
drivers/firmware/Kconfig | 3 +-
drivers/firmware/raspberrypi.c | 61 +
drivers/pci/controller/Kconfig | 22 +-
drivers/pci/controller/Makefile | 3 +-
drivers/pci/controller/cadence/pcie-cadence-ep.c | 2 +-
drivers/pci/controller/cadence/pcie-cadence-host.c | 10 +-
drivers/pci/controller/cadence/pcie-cadence.h | 6 +-
drivers/pci/controller/dwc/Kconfig | 17 +-
drivers/pci/controller/dwc/Makefile | 1 +
drivers/pci/controller/dwc/pci-dra7xx.c | 8 +-
drivers/pci/controller/dwc/pci-imx6.c | 4 +-
drivers/pci/controller/dwc/pci-meson.c | 4 +-
drivers/pci/controller/dwc/pcie-al.c | 2 +-
drivers/pci/controller/dwc/pcie-designware-ep.c | 22 +-
drivers/pci/controller/dwc/pcie-designware-host.c | 4 +-
drivers/pci/controller/dwc/pcie-designware.c | 7 +-
drivers/pci/controller/dwc/pcie-designware.h | 3 +-
drivers/pci/controller/dwc/pcie-hisi.c | 19 +-
drivers/pci/controller/dwc/pcie-intel-gw.c | 2 +-
drivers/pci/controller/dwc/pcie-tegra194.c | 9 +-
drivers/pci/controller/dwc/pcie-uniphier-ep.c | 383 +++++++
.../pci/controller/mobiveil/pcie-mobiveil-host.c | 4 +-
drivers/pci/controller/pci-aardvark.c | 266 ++++-
drivers/pci/controller/pci-host-common.c | 18 +-
drivers/pci/controller/pci-host-generic.c | 26 +-
drivers/pci/controller/pci-hyperv.c | 82 +-
drivers/pci/controller/pci-tegra.c | 7 +-
drivers/pci/controller/pci-thunder-ecam.c | 14 +-
drivers/pci/controller/pci-thunder-pem.c | 16 +-
drivers/pci/controller/pci-v3-semi.c | 6 +-
drivers/pci/controller/pci-xgene.c | 4 +-
drivers/pci/controller/pcie-altera.c | 2 +-
drivers/pci/controller/pcie-brcmstb.c | 37 +-
drivers/pci/controller/pcie-mediatek.c | 3 +
drivers/pci/controller/pcie-rcar-ep.c | 563 +++++++++
drivers/pci/controller/pcie-rcar-host.c | 1130 ++++++++++++++++++
drivers/pci/controller/pcie-rcar.c | 1211 +-------------------
drivers/pci/controller/pcie-rcar.h | 140 +++
drivers/pci/controller/pcie-rockchip-ep.c | 2 +-
drivers/pci/controller/pcie-tango.c | 13 +-
drivers/pci/controller/vmd.c | 6 +-
drivers/pci/ecam.c | 10 +-
drivers/pci/endpoint/functions/pci-epf-test.c | 3 +
drivers/pci/endpoint/pci-epc-mem.c | 204 +++-
drivers/pci/hotplug/pciehp.h | 2 -
drivers/pci/hotplug/rpaphp_core.c | 2 +-
drivers/pci/hotplug/shpchp.h | 2 +-
drivers/pci/hotplug/shpchp_ctrl.c | 3 +-
drivers/pci/hotplug/shpchp_pci.c | 5 +-
drivers/pci/of.c | 2 +-
drivers/pci/p2pdma.c | 2 +
drivers/pci/pci-acpi.c | 6 +-
drivers/pci/pci-bridge-emul.c | 61 +-
drivers/pci/pci-label.c | 4 +-
drivers/pci/pci.c | 64 +-
drivers/pci/pcie/Kconfig | 1 -
drivers/pci/pcie/aer.c | 340 ++----
drivers/pci/pcie/aspm.c | 10 -
drivers/pci/pcie/dpc.c | 3 +-
drivers/pci/pcie/edr.c | 4 +-
drivers/pci/pcie/pme.c | 4 +-
drivers/pci/pcie/portdrv.h | 13 +-
drivers/pci/pcie/ptm.c | 22 +-
drivers/pci/probe.c | 65 +-
drivers/pci/quirks.c | 50 +-
drivers/pci/remove.c | 2 +-
drivers/pci/setup-bus.c | 115 +-
drivers/pci/setup-res.c | 9 +-
drivers/pci/switch/switchtec.c | 2 +-
drivers/pcmcia/yenta_socket.c | 40 +-
drivers/thunderbolt/switch.c | 4 +-
drivers/tty/serial/8250/8250_pci.c | 6 -
drivers/usb/host/pci-quirks.c | 16 +
include/linux/pci-acpi.h | 18 +-
include/linux/pci-ecam.h | 25 +-
include/linux/pci-epc.h | 38 +-
include/linux/pci.h | 43 +-
include/linux/pci_ids.h | 6 +
include/soc/bcm2835/raspberrypi-firmware.h | 9 +-
97 files changed, 3682 insertions(+), 2007 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
create mode 100644 Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml
create mode 100644 Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
create mode 100644 drivers/pci/controller/dwc/pcie-uniphier-ep.c
create mode 100644 drivers/pci/controller/pcie-rcar-ep.c
create mode 100644 drivers/pci/controller/pcie-rcar-host.c
create mode 100644 drivers/pci/controller/pcie-rcar.h
next reply other threads:[~2020-06-05 20:23 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-05 20:22 Bjorn Helgaas [this message]
2020-06-06 18:09 ` [GIT PULL] PCI changes for v5.8 Linus Torvalds
2020-06-06 19:15 ` pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200605202257.GA1152522@bjorn-Precision-5520 \
--to=helgaas@kernel.org \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=robh@kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).