Re: [PATCH v5 1/3] media: rcar-vin: Invalidate pipeline if conversion is not possible on input formats

["Niklas Söderlund" <niklas.soderlund@ragnatech.se>]

Hi Lad,

Thanks for your work.

On 2020-05-27 13:16:48 +0100, Lad Prabhakar wrote:
> Up until now the VIN was capable to convert any of its supported input mbus
> formats to any of it's supported output pixel formats. With the addition of
> RAW formats this is no longer true.
> 
> This patch invalidates the pipeline by adding a check if given vin input
> format can be converted to supported output pixel format.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

> ---
>  drivers/media/platform/rcar-vin/rcar-dma.c  |  6 +++++-
>  drivers/media/platform/rcar-vin/rcar-v4l2.c | 11 ++++++++---
>  2 files changed, 13 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
> index 1a30cd036371..2b26204910fd 100644
> --- a/drivers/media/platform/rcar-vin/rcar-dma.c
> +++ b/drivers/media/platform/rcar-vin/rcar-dma.c
> @@ -1110,11 +1110,15 @@ static int rvin_mc_validate_format(struct rvin_dev *vin, struct v4l2_subdev *sd,
>  	case MEDIA_BUS_FMT_UYVY8_2X8:
>  	case MEDIA_BUS_FMT_UYVY10_2X10:
>  	case MEDIA_BUS_FMT_RGB888_1X24:
> -		vin->mbus_code = fmt.format.code;
> +		break;
> +	case MEDIA_BUS_FMT_SRGGB8_1X8:
> +		if (vin->format.pixelformat != V4L2_PIX_FMT_SRGGB8)
> +			return -EPIPE;
>  		break;
>  	default:
>  		return -EPIPE;
>  	}
> +	vin->mbus_code = fmt.format.code;
>  
>  	switch (fmt.format.field) {
>  	case V4L2_FIELD_TOP:
> diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> index f421e2584875..d3b6a992b4a2 100644
> --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> @@ -350,9 +350,9 @@ static int rvin_enum_fmt_vid_cap(struct file *file, void *priv,
>  	 * all of the related pixel formats. If mbus_code is not set enumerate
>  	 * all possible pixelformats.
>  	 *
> -	 * TODO: Once raw capture formats are added to the driver this needs
> -	 * to be extended so raw media bus codes only result in raw pixel
> -	 * formats.
> +	 * TODO: Once raw MEDIA_BUS_FMT_SRGGB12_1X12 format is added to the
> +	 * driver this needs to be extended so raw media bus code only result in
> +	 * raw pixel format.
>  	 */
>  	switch (f->mbus_code) {
>  	case 0:
> @@ -362,6 +362,11 @@ static int rvin_enum_fmt_vid_cap(struct file *file, void *priv,
>  	case MEDIA_BUS_FMT_UYVY10_2X10:
>  	case MEDIA_BUS_FMT_RGB888_1X24:
>  		break;
> +	case MEDIA_BUS_FMT_SRGGB8_1X8:
> +		if (f->index)
> +			return -EINVAL;
> +		f->pixelformat = V4L2_PIX_FMT_SRGGB8;
> +		return 0;
>  	default:
>  		return -EINVAL;
>  	}
> -- 
> 2.17.1
> 

-- 
Regards,
Niklas Söderlund