linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Kamal Dasu <kdasu.kdev@gmail.com>
Cc: Brian Norris <computersforpeace@gmail.com>,
	Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	linux-mtd@lists.infradead.org,
	bcm-kernel-feedback-list@broadcom.com,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH  2/2] mtd: rawnand: brcmnand: Ecc error handling on EDU transfers
Date: Thu, 11 Jun 2020 09:27:07 +0200	[thread overview]
Message-ID: <20200611092707.75da8c6a@xps13> (raw)
In-Reply-To: <20200611054454.2547-2-kdasu.kdev@gmail.com>

Hi Kamal,

Kamal Dasu <kdasu.kdev@gmail.com> wrote on Thu, 11 Jun 2020 01:44:54
-0400:

> Implemented ECC correctable and uncorrectable error handling for EDU

Implement?

> reads. If ECC correctable bitflips are encountered  on EDU transfer,

extra space                                         ^

> read page again using pio, This is needed due to a controller lmitation

s/pio/PIO/

> where read and corrected data is not transferred to the DMA buffer on ECC
> errors. This holds true for ECC correctable errors beyond set threshold.

error.

Not sure what the last sentence means?

> 
> Fixes: a5d53ad26a8b ("mtd: rawnand: brcmnand: Add support for flash-edu for dma transfers")
> Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
> ---

Minor nits below :)

>  drivers/mtd/nand/raw/brcmnand/brcmnand.c | 26 ++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
> index 0c1d6e543586..d7daa83c8a58 100644
> --- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
> +++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
> @@ -1855,6 +1855,22 @@ static int brcmnand_edu_trans(struct brcmnand_host *host, u64 addr, u32 *buf,
>  	edu_writel(ctrl, EDU_STOP, 0); /* force stop */
>  	edu_readl(ctrl, EDU_STOP);
>  
> +	if (ret == 0 && edu_cmd == EDU_CMD_READ) {

!ret

> +		u64 err_addr = 0;
> +
> +		/*
> +		 * check for ecc errors here, subpage ecc erros are
> +		 * retained in ecc error addr register

s/ecc/ECC/
s/erros/errors/
s/addr/address/

> +		 */
> +		err_addr = brcmnand_get_uncorrecc_addr(ctrl);
> +		if (!err_addr) {
> +			err_addr = brcmnand_get_correcc_addr(ctrl);
> +			if (err_addr)
> +				ret = -EUCLEAN;
> +		} else
> +			ret = -EBADMSG;

I don't like very much to see these values being used within NAND
controller drivers but I see it's already the cause, so I guess I can
live with that.

> +	}
> +
>  	return ret;
>  }
>  
> @@ -2058,6 +2074,7 @@ static int brcmnand_read(struct mtd_info *mtd, struct nand_chip *chip,
>  	u64 err_addr = 0;
>  	int err;
>  	bool retry = true;
> +	bool edu_read = false;
>  
>  	dev_dbg(ctrl->dev, "read %llx -> %p\n", (unsigned long long)addr, buf);
>  
> @@ -2075,6 +2092,10 @@ static int brcmnand_read(struct mtd_info *mtd, struct nand_chip *chip,
>  			else
>  				return -EIO;
>  		}
> +
> +		if (has_edu(ctrl))
> +			edu_read = true;

You don't need this extra value, you already have the cmd parameter
which tells you if it is a read or a write. You might even want to
create a if block so set dir and edu_cmd and eventually a local
edu_read if you think it still makes sense.

> +
>  	} else {
>  		if (oob)
>  			memset(oob, 0x99, mtd->oobsize);
> @@ -2122,6 +2143,11 @@ static int brcmnand_read(struct mtd_info *mtd, struct nand_chip *chip,
>  	if (mtd_is_bitflip(err)) {
>  		unsigned int corrected = brcmnand_count_corrected(ctrl);
>  
> +		/* in case of edu correctable error we read again using pio */

s/edu/EDU/ ?
s/pio/PIO/

> +		if (edu_read)
> +			err = brcmnand_read_by_pio(mtd, chip, addr, trans, buf,
> +						   oob, &err_addr);
> +
>  		dev_dbg(ctrl->dev, "corrected error at 0x%llx\n",
>  			(unsigned long long)err_addr);
>  		mtd->ecc_stats.corrected += corrected;

Thanks,
Miquèl

  reply	other threads:[~2020-06-11  7:27 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-11  5:44 [PATCH 1/2] mtd: rawnand: brcmnand: Don't default to edu transfer Kamal Dasu
2020-06-11  5:44 ` [PATCH 2/2] mtd: rawnand: brcmnand: Ecc error handling on EDU transfers Kamal Dasu
2020-06-11  7:27   ` Miquel Raynal [this message]
2020-06-11 16:04     ` Kamal Dasu
2020-06-12  7:07       ` Miquel Raynal
2020-06-12 16:34         ` Kamal Dasu
2020-06-15  7:19           ` Miquel Raynal
2020-06-15 15:11             ` Kamal Dasu
2020-06-15 17:37               ` Miquel Raynal
2020-06-11  7:16 ` [PATCH 1/2] mtd: rawnand: brcmnand: Don't default to edu transfer Miquel Raynal
2020-06-11 15:22   ` Kamal Dasu
2020-06-11 15:24     ` Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200611092707.75da8c6a@xps13 \
    --to=miquel.raynal@bootlin.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=computersforpeace@gmail.com \
    --cc=kdasu.kdev@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).