From: "Ramuthevar,Vadivel MuruganX" <vadivel.muruganx.ramuthevar@linux.intel.com>
To: linux-kernel@vger.kernel.org, balbi@kernel.org, robh@kernel.org,
p.zabel@pengutronix.de
Cc: gregkh@linuxfoundation.org, devicetree@vger.kernel.org,
linux-usb@vger.kernel.org, cheol.yong.kim@intel.com,
qi-ming.wu@intel.com, yin1.li@intel.com,
andriy.shevchenko@intel.com,
"Ramuthevar,Vadivel MuruganX"
<vadivel.muruganx.ramuthevar@linux.intel.com>
Subject: [PATCH v3 0/2] usb : phy: Add USB PHY support on Intel LGM SoC
Date: Fri, 12 Jun 2020 10:59:39 +0800 [thread overview]
Message-ID: <20200612025941.5484-1-vadivel.muruganx.ramuthevar@linux.intel.com> (raw)
The USB PHY provides the optimized for low power dissipation while active, idle, or on standby.
Requires minimal external components, a single resistor, for best operation.
Supports 10/5-Gbps high-speed data transmission rates through 3-m USB 3.x cable
---
v3:
- Andy's review comments update
- hardcode return value changed to actual return value from the callee
- add error check is fixed according to the above
- correct the assignment in redundant
- combine the split line into one line
v2:
- Address Phillip's review comments
- replace devm_reset_control_get() by devm_reset_control_get_exclusive()
- re-design the assert and deassert fucntion calls as per review comments
- address kbuild bot warnings
- add the comments
v1:
- initial version
---
dt-bindings: usb: Add USB PHY support for Intel LGM SoC
v3:
- No Change
v2:
- No Change
v1:
- initial version
Ramuthevar Vadivel Murugan (2):
dt-bindings: usb: Add USB PHY support for Intel LGM SoC
usb: phy: Add USB3 PHY support for Intel LGM SoC
.../devicetree/bindings/usb/intel,lgm-usb-phy.yaml | 53 ++++
drivers/usb/phy/Kconfig | 11 +
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/phy-lgm-usb.c | 278 +++++++++++++++++++++
4 files changed, 343 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/intel,lgm-usb-phy.yaml
create mode 100644 drivers/usb/phy/phy-lgm-usb.c
--
2.11.0
next reply other threads:[~2020-06-12 3:01 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-12 2:59 Ramuthevar,Vadivel MuruganX [this message]
2020-06-12 2:59 ` [PATCH v3 1/2] dt-bindings: usb: Add USB PHY support for Intel LGM SoC Ramuthevar,Vadivel MuruganX
2020-06-12 2:59 ` [PATCH v3 2/2] usb: phy: Add USB3 " Ramuthevar,Vadivel MuruganX
2020-06-12 13:18 ` Andy Shevchenko
2020-06-17 0:10 ` Ramuthevar, Vadivel MuruganX
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200612025941.5484-1-vadivel.muruganx.ramuthevar@linux.intel.com \
--to=vadivel.muruganx.ramuthevar@linux.intel.com \
--cc=andriy.shevchenko@intel.com \
--cc=balbi@kernel.org \
--cc=cheol.yong.kim@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=qi-ming.wu@intel.com \
--cc=robh@kernel.org \
--cc=yin1.li@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).