From: Andrey Konovalov <andrey.konovalov@linaro.org>
To: mchehab@kernel.org, sakari.ailus@iki.fi,
manivannan.sadhasivam@linaro.org
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
c.barrett@framos.com, a.brela@framos.com,
peter.griffin@linaro.org,
Andrey Konovalov <andrey.konovalov@linaro.org>
Subject: [PATCH v5 10/10] media: i2c: imx290: set bus_type before calling v4l2_fwnode_endpoint_alloc_parse()
Date: Fri, 12 Jun 2020 16:53:55 +0300 [thread overview]
Message-ID: <20200612135355.30286-11-andrey.konovalov@linaro.org> (raw)
In-Reply-To: <20200612135355.30286-1-andrey.konovalov@linaro.org>
The bus_type field of v4l2_fwnode_endpoint structure passed as the argument
to v4l2_fwnode_endpoint_alloc_parse() function must be initiaized.
Set it to V4L2_MBUS_CSI2_DPHY, and check for -ENXIO which is returned
when the requested media bus type doesn't match the fwnode.
Also remove v4l2_fwnode_endpoint field from struct imx290 as it is only
needed in the probe function: use the local variable for this purpose.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
---
drivers/media/i2c/imx290.c | 38 +++++++++++++++++++-------------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
index 02001c1b0dfc..9c97830164e9 100644
--- a/drivers/media/i2c/imx290.c
+++ b/drivers/media/i2c/imx290.c
@@ -70,7 +70,6 @@ struct imx290 {
u8 bpp;
struct v4l2_subdev sd;
- struct v4l2_fwnode_endpoint ep;
struct media_pad pad;
struct v4l2_mbus_framefmt current_format;
const struct imx290_mode *current_mode;
@@ -914,17 +913,18 @@ static const struct media_entity_operations imx290_subdev_entity_ops = {
* of MIPI data lanes are mentioned in the device tree, or the value of the
* first missing frequency otherwise.
*/
-static s64 imx290_check_link_freqs(const struct imx290 *imx290)
+static s64 imx290_check_link_freqs(const struct imx290 *imx290,
+ const struct v4l2_fwnode_endpoint *ep)
{
int i, j;
const s64 *freqs = imx290_link_freqs_ptr(imx290);
int freqs_count = imx290_link_freqs_num(imx290);
for (i = 0; i < freqs_count; i++) {
- for (j = 0; j < imx290->ep.nr_of_link_frequencies; j++)
- if (freqs[i] == imx290->ep.link_frequencies[j])
+ for (j = 0; j < ep->nr_of_link_frequencies; j++)
+ if (freqs[i] == ep->link_frequencies[j])
break;
- if (j == imx290->ep.nr_of_link_frequencies)
+ if (j == ep->nr_of_link_frequencies)
return freqs[i];
}
return 0;
@@ -934,6 +934,10 @@ static int imx290_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct fwnode_handle *endpoint;
+ /* Only CSI2 is supported for now: */
+ struct v4l2_fwnode_endpoint ep = {
+ .bus_type = V4L2_MBUS_CSI2_DPHY
+ };
struct imx290 *imx290;
u32 xclk_freq;
s64 fq;
@@ -956,15 +960,18 @@ static int imx290_probe(struct i2c_client *client)
return -EINVAL;
}
- ret = v4l2_fwnode_endpoint_alloc_parse(endpoint, &imx290->ep);
+ ret = v4l2_fwnode_endpoint_alloc_parse(endpoint, &ep);
fwnode_handle_put(endpoint);
- if (ret) {
+ if (ret == -ENXIO) {
+ dev_err(dev, "Unsupported bus type, should be CSI2\n");
+ goto free_err;
+ } else if (ret) {
dev_err(dev, "Parsing endpoint node failed\n");
goto free_err;
}
/* Get number of data lanes */
- imx290->nlanes = imx290->ep.bus.mipi_csi2.num_data_lanes;
+ imx290->nlanes = ep.bus.mipi_csi2.num_data_lanes;
if (imx290->nlanes != 2 && imx290->nlanes != 4) {
dev_err(dev, "Invalid data lanes: %d\n", imx290->nlanes);
ret = -EINVAL;
@@ -973,27 +980,20 @@ static int imx290_probe(struct i2c_client *client)
dev_dbg(dev, "Using %u data lanes\n", imx290->nlanes);
- if (!imx290->ep.nr_of_link_frequencies) {
+ if (!ep.nr_of_link_frequencies) {
dev_err(dev, "link-frequency property not found in DT\n");
ret = -EINVAL;
goto free_err;
}
/* Check that link frequences for all the modes are in device tree */
- fq = imx290_check_link_freqs(imx290);
+ fq = imx290_check_link_freqs(imx290, &ep);
if (fq) {
dev_err(dev, "Link frequency of %lld is not supported\n", fq);
ret = -EINVAL;
goto free_err;
}
- /* Only CSI2 is supported for now */
- if (imx290->ep.bus_type != V4L2_MBUS_CSI2_DPHY) {
- dev_err(dev, "Unsupported bus type, should be CSI2\n");
- ret = -EINVAL;
- goto free_err;
- }
-
/* get system clock (xclk) */
imx290->xclk = devm_clk_get(dev, "xclk");
if (IS_ERR(imx290->xclk)) {
@@ -1108,7 +1108,7 @@ static int imx290_probe(struct i2c_client *client)
pm_runtime_enable(dev);
pm_runtime_idle(dev);
- v4l2_fwnode_endpoint_free(&imx290->ep);
+ v4l2_fwnode_endpoint_free(&ep);
return 0;
@@ -1118,7 +1118,7 @@ static int imx290_probe(struct i2c_client *client)
v4l2_ctrl_handler_free(&imx290->ctrls);
mutex_destroy(&imx290->lock);
free_err:
- v4l2_fwnode_endpoint_free(&imx290->ep);
+ v4l2_fwnode_endpoint_free(&ep);
return ret;
}
--
2.17.1
next prev parent reply other threads:[~2020-06-12 13:55 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-12 13:53 [PATCH v5 00/10] Improvements to IMX290 CMOS driver Andrey Konovalov
2020-06-12 13:53 ` [PATCH v5 01/10] media: i2c: imx290: set the format before VIDIOC_SUBDEV_G_FMT is called Andrey Konovalov
2020-06-12 13:53 ` [PATCH v5 02/10] media: i2c: imx290: fix the order of the args in SET_RUNTIME_PM_OPS() Andrey Konovalov
2020-06-12 13:53 ` [PATCH v5 03/10] media: i2c: imx290: fix reset GPIO pin handling Andrey Konovalov
2020-06-12 13:53 ` [PATCH v5 04/10] media: i2c: imx290: Add support for 2 data lanes Andrey Konovalov
2020-06-12 13:53 ` [PATCH v5 05/10] media: i2c: imx290: Add configurable link frequency and pixel rate Andrey Konovalov
2020-06-12 13:53 ` [PATCH v5 06/10] media: i2c: imx290: Add support for test pattern generation Andrey Konovalov
2020-06-23 12:25 ` Sakari Ailus
2020-06-12 13:53 ` [PATCH v5 07/10] media: i2c: imx290: Add RAW12 mode support Andrey Konovalov
2020-06-12 13:53 ` [PATCH v5 08/10] media: i2c: imx290: Add support to enumerate all frame sizes Andrey Konovalov
2020-06-12 13:53 ` [PATCH v5 09/10] media: i2c: imx290: Move the settle time delay out of loop Andrey Konovalov
2020-06-12 13:53 ` Andrey Konovalov [this message]
2020-06-15 14:01 ` [PATCH v5 10/10] media: i2c: imx290: set bus_type before calling v4l2_fwnode_endpoint_alloc_parse() Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200612135355.30286-11-andrey.konovalov@linaro.org \
--to=andrey.konovalov@linaro.org \
--cc=a.brela@framos.com \
--cc=c.barrett@framos.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=mchehab@kernel.org \
--cc=peter.griffin@linaro.org \
--cc=sakari.ailus@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).