linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Grygorii Strashko <grygorii.strashko@ti.com>
To: "David S. Miller" <davem@davemloft.net>, <netdev@vger.kernel.org>,
	Jakub Kicinski <kuba@kernel.org>
Cc: Murali Karicheri <m-karicheri2@ti.com>,
	Sekhar Nori <nsekhar@ti.com>, <linux-kernel@vger.kernel.org>,
	<linux-omap@vger.kernel.org>,
	Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [PATCH] net: ethernet: ti: ale: fix allmulti for nu type ale
Date: Sat, 13 Jun 2020 17:54:14 +0300	[thread overview]
Message-ID: <20200613145414.17190-1-grygorii.strashko@ti.com> (raw)

On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow
unregistered mcast packets to pass.

This happens, because ALE VLAN entries on these SoCs do not contain port
masks for reg/unreg mcast packets, but instead store indexes of
ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for
reg/unreg mcast packets.
This path was missed by commit 9d1f6447274f ("net: ethernet: ti: ale: fix
seeing unreg mcast packets with promisc and allmulti disabled").

Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti().

Fixes: 9d1f6447274f ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 drivers/net/ethernet/ti/cpsw_ale.c | 49 ++++++++++++++++++++++++------
 1 file changed, 40 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw_ale.c b/drivers/net/ethernet/ti/cpsw_ale.c
index 8dc6be11b2ff..9ad872bfae3a 100644
--- a/drivers/net/ethernet/ti/cpsw_ale.c
+++ b/drivers/net/ethernet/ti/cpsw_ale.c
@@ -604,10 +604,44 @@ void cpsw_ale_set_unreg_mcast(struct cpsw_ale *ale, int unreg_mcast_mask,
 	}
 }
 
+static void cpsw_ale_vlan_set_unreg_mcast(struct cpsw_ale *ale, u32 *ale_entry,
+					  int allmulti)
+{
+	int unreg_mcast;
+
+	unreg_mcast =
+		cpsw_ale_get_vlan_unreg_mcast(ale_entry,
+					      ale->vlan_field_bits);
+	if (allmulti)
+		unreg_mcast |= ALE_PORT_HOST;
+	else
+		unreg_mcast &= ~ALE_PORT_HOST;
+	cpsw_ale_set_vlan_unreg_mcast(ale_entry, unreg_mcast,
+				      ale->vlan_field_bits);
+}
+
+static void
+cpsw_ale_vlan_set_unreg_mcast_idx(struct cpsw_ale *ale, u32 *ale_entry,
+				  int allmulti)
+{
+	int unreg_mcast;
+	int idx;
+
+	idx = cpsw_ale_get_vlan_unreg_mcast_idx(ale_entry);
+
+	unreg_mcast = readl(ale->params.ale_regs + ALE_VLAN_MASK_MUX(idx));
+
+	if (allmulti)
+		unreg_mcast |= ALE_PORT_HOST;
+	else
+		unreg_mcast &= ~ALE_PORT_HOST;
+
+	writel(unreg_mcast, ale->params.ale_regs + ALE_VLAN_MASK_MUX(idx));
+}
+
 void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti, int port)
 {
 	u32 ale_entry[ALE_ENTRY_WORDS];
-	int unreg_mcast = 0;
 	int type, idx;
 
 	for (idx = 0; idx < ale->params.ale_entries; idx++) {
@@ -624,15 +658,12 @@ void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti, int port)
 		if (port != -1 && !(vlan_members & BIT(port)))
 			continue;
 
-		unreg_mcast =
-			cpsw_ale_get_vlan_unreg_mcast(ale_entry,
-						      ale->vlan_field_bits);
-		if (allmulti)
-			unreg_mcast |= ALE_PORT_HOST;
+		if (!ale->params.nu_switch_ale)
+			cpsw_ale_vlan_set_unreg_mcast(ale, ale_entry, allmulti);
 		else
-			unreg_mcast &= ~ALE_PORT_HOST;
-		cpsw_ale_set_vlan_unreg_mcast(ale_entry, unreg_mcast,
-					      ale->vlan_field_bits);
+			cpsw_ale_vlan_set_unreg_mcast_idx(ale, ale_entry,
+							  allmulti);
+
 		cpsw_ale_write(ale, idx, ale_entry);
 	}
 }
-- 
2.17.1


             reply	other threads:[~2020-06-13 14:54 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-13 14:54 Grygorii Strashko [this message]
2020-06-13 22:38 ` [PATCH] net: ethernet: ti: ale: fix allmulti for nu type ale David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200613145414.17190-1-grygorii.strashko@ti.com \
    --to=grygorii.strashko@ti.com \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=m-karicheri2@ti.com \
    --cc=netdev@vger.kernel.org \
    --cc=nsekhar@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).