From: Jiri Slaby <jslaby@suse.cz>
To: gregkh@linuxfoundation.org
Cc: linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org,
Jiri Slaby <jslaby@suse.cz>
Subject: [PATCH 31/38] vt_ioctl: move K* ioctls to a separate function
Date: Mon, 15 Jun 2020 09:49:03 +0200 [thread overview]
Message-ID: <20200615074910.19267-31-jslaby@suse.cz> (raw)
In-Reply-To: <20200615074910.19267-1-jslaby@suse.cz>
We create a new vt_k_ioctl here and move there all the K* ioctls. This
makes vt_ioctl significantly smaller.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/vt/vt_ioctl.c | 294 ++++++++++++++++++++------------------
1 file changed, 157 insertions(+), 137 deletions(-)
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index 911edd8d1272..1b423bdc488e 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -241,133 +241,15 @@ int vt_waitactive(int n)
#define GPLAST 0x3df
#define GPNUM (GPLAST - GPFIRST + 1)
-
-
-static inline int
-do_fontx_ioctl(int cmd, struct consolefontdesc __user *user_cfd, int perm, struct console_font_op *op)
-{
- struct consolefontdesc cfdarg;
- int i;
-
- if (copy_from_user(&cfdarg, user_cfd, sizeof(struct consolefontdesc)))
- return -EFAULT;
-
- switch (cmd) {
- case PIO_FONTX:
- if (!perm)
- return -EPERM;
- op->op = KD_FONT_OP_SET;
- op->flags = KD_FONT_FLAG_OLD;
- op->width = 8;
- op->height = cfdarg.charheight;
- op->charcount = cfdarg.charcount;
- op->data = cfdarg.chardata;
- return con_font_op(vc_cons[fg_console].d, op);
- case GIO_FONTX: {
- op->op = KD_FONT_OP_GET;
- op->flags = KD_FONT_FLAG_OLD;
- op->width = 8;
- op->height = cfdarg.charheight;
- op->charcount = cfdarg.charcount;
- op->data = cfdarg.chardata;
- i = con_font_op(vc_cons[fg_console].d, op);
- if (i)
- return i;
- cfdarg.charheight = op->height;
- cfdarg.charcount = op->charcount;
- if (copy_to_user(user_cfd, &cfdarg, sizeof(struct consolefontdesc)))
- return -EFAULT;
- return 0;
- }
- }
- return -EINVAL;
-}
-
-static inline int
-do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_data *vc)
-{
- struct unimapdesc tmp;
-
- if (copy_from_user(&tmp, user_ud, sizeof tmp))
- return -EFAULT;
- switch (cmd) {
- case PIO_UNIMAP:
- if (!perm)
- return -EPERM;
- return con_set_unimap(vc, tmp.entry_ct, tmp.entries);
- case GIO_UNIMAP:
- if (!perm && fg_console != vc->vc_num)
- return -EPERM;
- return con_get_unimap(vc, tmp.entry_ct, &(user_ud->entry_ct), tmp.entries);
- }
- return 0;
-}
-
-/* deallocate a single console, if possible (leave 0) */
-static int vt_disallocate(unsigned int vc_num)
-{
- struct vc_data *vc = NULL;
- int ret = 0;
-
- console_lock();
- if (vt_busy(vc_num))
- ret = -EBUSY;
- else if (vc_num)
- vc = vc_deallocate(vc_num);
- console_unlock();
-
- if (vc && vc_num >= MIN_NR_CONSOLES)
- tty_port_put(&vc->port);
-
- return ret;
-}
-
-/* deallocate all unused consoles, but leave 0 */
-static void vt_disallocate_all(void)
-{
- struct vc_data *vc[MAX_NR_CONSOLES];
- int i;
-
- console_lock();
- for (i = 1; i < MAX_NR_CONSOLES; i++)
- if (!vt_busy(i))
- vc[i] = vc_deallocate(i);
- else
- vc[i] = NULL;
- console_unlock();
-
- for (i = 1; i < MAX_NR_CONSOLES; i++) {
- if (vc[i] && i >= MIN_NR_CONSOLES)
- tty_port_put(&vc[i]->port);
- }
-}
-
-
-/*
- * We handle the console-specific ioctl's here. We allow the
- * capability to modify any console, not just the fg_console.
- */
-int vt_ioctl(struct tty_struct *tty,
- unsigned int cmd, unsigned long arg)
+static int vt_k_ioctl(struct tty_struct *tty, unsigned int cmd,
+ unsigned long arg, bool perm)
{
struct vc_data *vc = tty->driver_data;
- struct console_font_op op; /* used in multiple places here */
- unsigned int console = vc->vc_num;
void __user *up = (void __user *)arg;
- int i, perm;
+ unsigned int console = vc->vc_num;
int ret;
- /*
- * To have permissions to do most of the vt ioctls, we either have
- * to be the owner of the tty, or have CAP_SYS_TTY_CONFIG.
- */
- perm = 0;
- if (current->signal->tty == tty || capable(CAP_SYS_TTY_CONFIG))
- perm = 1;
-
switch (cmd) {
- case TIOCLINUX:
- return tioclinux(tty, arg);
case KIOCSOUND:
if (!perm)
return -EPERM;
@@ -387,7 +269,7 @@ int vt_ioctl(struct tty_struct *tty,
return -EPERM;
{
unsigned int ticks, count;
-
+
/*
* Generate the tone for the appropriate number of ticks.
* If the time is zero, turn off sound ourselves.
@@ -433,11 +315,11 @@ int vt_ioctl(struct tty_struct *tty,
#endif
/* Linux m68k/i386 interface for setting the keyboard delay/repeat rate */
-
+
case KDKBDREP:
{
struct kbd_repeat kbrep;
-
+
if (!capable(CAP_SYS_TTY_CONFIG))
return -EPERM;
@@ -573,6 +455,157 @@ int vt_ioctl(struct tty_struct *tty,
spin_unlock_irq(&vt_spawn_con.lock);
break;
+ case KDFONTOP: {
+ struct console_font_op op;
+
+ if (copy_from_user(&op, up, sizeof(op)))
+ return -EFAULT;
+ if (!perm && op.op != KD_FONT_OP_GET)
+ return -EPERM;
+ ret = con_font_op(vc, &op);
+ if (ret)
+ return ret;
+ if (copy_to_user(up, &op, sizeof(op)))
+ return -EFAULT;
+ break;
+ }
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+
+ return 0;
+}
+
+static inline int do_fontx_ioctl(int cmd,
+ struct consolefontdesc __user *user_cfd, int perm,
+ struct console_font_op *op)
+{
+ struct consolefontdesc cfdarg;
+ int i;
+
+ if (copy_from_user(&cfdarg, user_cfd, sizeof(struct consolefontdesc)))
+ return -EFAULT;
+
+ switch (cmd) {
+ case PIO_FONTX:
+ if (!perm)
+ return -EPERM;
+ op->op = KD_FONT_OP_SET;
+ op->flags = KD_FONT_FLAG_OLD;
+ op->width = 8;
+ op->height = cfdarg.charheight;
+ op->charcount = cfdarg.charcount;
+ op->data = cfdarg.chardata;
+ return con_font_op(vc_cons[fg_console].d, op);
+ case GIO_FONTX: {
+ op->op = KD_FONT_OP_GET;
+ op->flags = KD_FONT_FLAG_OLD;
+ op->width = 8;
+ op->height = cfdarg.charheight;
+ op->charcount = cfdarg.charcount;
+ op->data = cfdarg.chardata;
+ i = con_font_op(vc_cons[fg_console].d, op);
+ if (i)
+ return i;
+ cfdarg.charheight = op->height;
+ cfdarg.charcount = op->charcount;
+ if (copy_to_user(user_cfd, &cfdarg, sizeof(struct consolefontdesc)))
+ return -EFAULT;
+ return 0;
+ }
+ }
+ return -EINVAL;
+}
+
+static inline int do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud,
+ int perm, struct vc_data *vc)
+{
+ struct unimapdesc tmp;
+
+ if (copy_from_user(&tmp, user_ud, sizeof tmp))
+ return -EFAULT;
+ switch (cmd) {
+ case PIO_UNIMAP:
+ if (!perm)
+ return -EPERM;
+ return con_set_unimap(vc, tmp.entry_ct, tmp.entries);
+ case GIO_UNIMAP:
+ if (!perm && fg_console != vc->vc_num)
+ return -EPERM;
+ return con_get_unimap(vc, tmp.entry_ct, &(user_ud->entry_ct),
+ tmp.entries);
+ }
+ return 0;
+}
+
+/* deallocate a single console, if possible (leave 0) */
+static int vt_disallocate(unsigned int vc_num)
+{
+ struct vc_data *vc = NULL;
+ int ret = 0;
+
+ console_lock();
+ if (vt_busy(vc_num))
+ ret = -EBUSY;
+ else if (vc_num)
+ vc = vc_deallocate(vc_num);
+ console_unlock();
+
+ if (vc && vc_num >= MIN_NR_CONSOLES)
+ tty_port_put(&vc->port);
+
+ return ret;
+}
+
+/* deallocate all unused consoles, but leave 0 */
+static void vt_disallocate_all(void)
+{
+ struct vc_data *vc[MAX_NR_CONSOLES];
+ int i;
+
+ console_lock();
+ for (i = 1; i < MAX_NR_CONSOLES; i++)
+ if (!vt_busy(i))
+ vc[i] = vc_deallocate(i);
+ else
+ vc[i] = NULL;
+ console_unlock();
+
+ for (i = 1; i < MAX_NR_CONSOLES; i++) {
+ if (vc[i] && i >= MIN_NR_CONSOLES)
+ tty_port_put(&vc[i]->port);
+ }
+}
+
+/*
+ * We handle the console-specific ioctl's here. We allow the
+ * capability to modify any console, not just the fg_console.
+ */
+int vt_ioctl(struct tty_struct *tty,
+ unsigned int cmd, unsigned long arg)
+{
+ struct vc_data *vc = tty->driver_data;
+ struct console_font_op op; /* used in multiple places here */
+ void __user *up = (void __user *)arg;
+ int i, perm;
+ int ret;
+
+ /*
+ * To have permissions to do most of the vt ioctls, we either have
+ * to be the owner of the tty, or have CAP_SYS_TTY_CONFIG.
+ */
+ perm = 0;
+ if (current->signal->tty == tty || capable(CAP_SYS_TTY_CONFIG))
+ perm = 1;
+
+ ret = vt_k_ioctl(tty, cmd, arg, perm);
+ if (ret != -ENOIOCTLCMD)
+ return ret;
+
+ switch (cmd) {
+ case TIOCLINUX:
+ return tioclinux(tty, arg);
case VT_SETMODE:
{
struct vt_mode tmp;
@@ -922,19 +955,6 @@ int vt_ioctl(struct tty_struct *tty,
break;
#endif
- case KDFONTOP: {
- if (copy_from_user(&op, up, sizeof(op)))
- return -EFAULT;
- if (!perm && op.op != KD_FONT_OP_GET)
- return -EPERM;
- ret = con_font_op(vc, &op);
- if (ret)
- return ret;
- if (copy_to_user(up, &op, sizeof(op)))
- return -EFAULT;
- break;
- }
-
case PIO_SCRNMAP:
if (!perm)
return -EPERM;
--
2.27.0
next prev parent reply other threads:[~2020-06-15 7:49 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-15 7:48 [PATCH 01/38] vc: separate state Jiri Slaby
2020-06-15 7:48 ` [PATCH 02/38] vt: introduce enum vc_intensity for intensity Jiri Slaby
2020-06-15 7:48 ` [PATCH 03/38] vc: switch state to bool Jiri Slaby
2020-06-15 7:48 ` [PATCH 04/38] vt: deduplicate setGx code Jiri Slaby
2020-06-15 7:48 ` [PATCH 05/38] vt: switch G0/1_charset to an array Jiri Slaby
2020-06-15 7:48 ` [PATCH 06/38] vt: convert vc_tab_stop to bitmap Jiri Slaby
2020-06-15 7:48 ` [PATCH 07/38] vt: remove 25 years stale comment Jiri Slaby
2020-06-15 7:48 ` [PATCH 08/38] vt: use tty_insert_flip_string in respond_string Jiri Slaby
2020-06-15 7:48 ` [PATCH 09/38] vt: get rid of VT10.ID macros Jiri Slaby
2020-06-15 7:48 ` [PATCH 10/38] vt: move vc_translate to vt.c and rename it Jiri Slaby
2020-06-15 7:48 ` [PATCH 11/38] vt: use modern types in do_con_write Jiri Slaby
2020-06-15 7:48 ` [PATCH 12/38] vt: separate unicode handling into vc_translate_unicode Jiri Slaby
2020-06-15 7:48 ` [PATCH 13/38] vt: rearrange vc_translate_unicode Jiri Slaby
2020-06-15 7:48 ` [PATCH 14/38] vt: extract attribute inversion to vc_invert_attr Jiri Slaby
2020-06-15 7:48 ` [PATCH 15/38] vt: move rescan_last_byte label earlier Jiri Slaby
2020-06-15 7:48 ` [PATCH 16/38] vc: move translation out of do_con_write Jiri Slaby
2020-06-15 7:48 ` [PATCH 17/38] vc: introduce struct vc_draw_region Jiri Slaby
2020-06-15 7:48 ` [PATCH 18/38] vc: extract detecting control characters from do_con_write Jiri Slaby
2020-06-15 7:48 ` [PATCH 19/38] vc: move normal char processing " Jiri Slaby
2020-06-15 7:48 ` [PATCH 20/38] vc: simplify condition in vc_con_write_normal Jiri Slaby
2020-06-15 7:48 ` [PATCH 21/38] vt: simplify vc_attr handling " Jiri Slaby
2020-06-15 7:48 ` [PATCH 22/38] vt: make tc write more obvious " Jiri Slaby
2020-06-15 7:48 ` [PATCH 23/38] vt: synchronize types and use min in csi_X Jiri Slaby
2020-06-15 7:48 ` [PATCH 24/38] vt: whitespace and paren cleanup in add_softcursor Jiri Slaby
2020-06-15 7:48 ` [PATCH 25/38] vt: redefine world of cursor macros Jiri Slaby
2020-06-15 7:48 ` [PATCH 26/38] vt: use newly defined CUR_* macros Jiri Slaby
2020-06-15 20:31 ` Helge Deller
2020-06-15 7:48 ` [PATCH 27/38] vt: remove superfluous parens in invert_screen and build_attr Jiri Slaby
2020-06-15 7:49 ` [PATCH 28/38] vt: simplify noncolor attributes in build_attr Jiri Slaby
2020-06-15 7:49 ` [PATCH 29/38] vt_ioctl: eliminate ret & breaks in vt_ioctl Jiri Slaby
2020-06-15 7:49 ` [PATCH 30/38] vt_ioctl: eliminate use of uival and ucval Jiri Slaby
2020-06-15 7:49 ` Jiri Slaby [this message]
2020-06-15 7:49 ` [PATCH 32/38] vt_ioctl: move io ioctls to a separate function Jiri Slaby
2020-06-15 7:49 ` [PATCH 33/38] vt_ioctl: move vt_setactivate out of vt_ioctl Jiri Slaby
2020-06-15 7:49 ` [PATCH 34/38] vt_ioctl: move vt_reldisp " Jiri Slaby
2020-06-15 7:49 ` [PATCH 35/38] vt_ioctl: move vt_resizex " Jiri Slaby
2020-06-15 7:49 ` [PATCH 36/38] vt_ioctl: move vt_io_fontreset out of vt_io_ioctl Jiri Slaby
2020-06-15 7:49 ` [PATCH 37/38] vt_ioctl: move vt_kdsetmode out of vt_k_ioctl Jiri Slaby
2020-06-15 7:49 ` [PATCH 38/38] vt_ioctl: move perm checks level up Jiri Slaby
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200615074910.19267-31-jslaby@suse.cz \
--to=jslaby@suse.cz \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).