From: Alexandre Torgue <alexandre.torgue@st.com>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: <linux-kernel@vger.kernel.org>, <linux-gpio@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<alexandre.torgue@st.com>
Subject: [PATCH] pinctrl: stm32: use the hwspin_lock_timeout_in_atomic() API
Date: Mon, 15 Jun 2020 14:44:56 +0200 [thread overview]
Message-ID: <20200615124456.27328-1-alexandre.torgue@st.com> (raw)
From: Fabien Dessenne <fabien.dessenne@st.com>
Use the hwspin_lock_timeout_in_atomic() API which is the most appropriated
here. Indeed:
- hwspin_lock_() is called after spin_lock_irqsave()
- the hwspin_lock_timeout() API relies on jiffies count which won't work
if IRQs are disabled which is the case here.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
index a657cd829ce6..1f7fff84aa9d 100644
--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
+++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
@@ -64,7 +64,7 @@
#define gpio_range_to_bank(chip) \
container_of(chip, struct stm32_gpio_bank, range)
-#define HWSPINLOCK_TIMEOUT 5 /* msec */
+#define HWSPNLCK_TIMEOUT 1000 /* usec */
static const char * const stm32_gpio_functions[] = {
"gpio", "af0", "af1",
@@ -420,12 +420,14 @@ static int stm32_gpio_domain_activate(struct irq_domain *d,
* to avoid overriding.
*/
spin_lock_irqsave(&pctl->irqmux_lock, flags);
- if (pctl->hwlock)
- ret = hwspin_lock_timeout(pctl->hwlock, HWSPINLOCK_TIMEOUT);
- if (ret) {
- dev_err(pctl->dev, "Can't get hwspinlock\n");
- goto unlock;
+ if (pctl->hwlock) {
+ ret = hwspin_lock_timeout_in_atomic(pctl->hwlock,
+ HWSPNLCK_TIMEOUT);
+ if (ret) {
+ dev_err(pctl->dev, "Can't get hwspinlock\n");
+ goto unlock;
+ }
}
if (pctl->irqmux_map & BIT(irq_data->hwirq)) {
@@ -433,7 +435,7 @@ static int stm32_gpio_domain_activate(struct irq_domain *d,
irq_data->hwirq);
ret = -EBUSY;
if (pctl->hwlock)
- hwspin_unlock(pctl->hwlock);
+ hwspin_unlock_in_atomic(pctl->hwlock);
goto unlock;
} else {
pctl->irqmux_map |= BIT(irq_data->hwirq);
@@ -442,7 +444,7 @@ static int stm32_gpio_domain_activate(struct irq_domain *d,
regmap_field_write(pctl->irqmux[irq_data->hwirq], bank->bank_ioport_nr);
if (pctl->hwlock)
- hwspin_unlock(pctl->hwlock);
+ hwspin_unlock_in_atomic(pctl->hwlock);
unlock:
spin_unlock_irqrestore(&pctl->irqmux_lock, flags);
@@ -750,12 +752,13 @@ static int stm32_pmx_set_mode(struct stm32_gpio_bank *bank,
clk_enable(bank->clk);
spin_lock_irqsave(&bank->lock, flags);
- if (pctl->hwlock)
- err = hwspin_lock_timeout(pctl->hwlock, HWSPINLOCK_TIMEOUT);
-
- if (err) {
- dev_err(pctl->dev, "Can't get hwspinlock\n");
- goto unlock;
+ if (pctl->hwlock) {
+ err = hwspin_lock_timeout_in_atomic(pctl->hwlock,
+ HWSPNLCK_TIMEOUT);
+ if (err) {
+ dev_err(pctl->dev, "Can't get hwspinlock\n");
+ goto unlock;
+ }
}
val = readl_relaxed(bank->base + alt_offset);
@@ -769,7 +772,7 @@ static int stm32_pmx_set_mode(struct stm32_gpio_bank *bank,
writel_relaxed(val, bank->base + STM32_GPIO_MODER);
if (pctl->hwlock)
- hwspin_unlock(pctl->hwlock);
+ hwspin_unlock_in_atomic(pctl->hwlock);
stm32_gpio_backup_mode(bank, pin, mode, alt);
@@ -869,12 +872,13 @@ static int stm32_pconf_set_driving(struct stm32_gpio_bank *bank,
clk_enable(bank->clk);
spin_lock_irqsave(&bank->lock, flags);
- if (pctl->hwlock)
- err = hwspin_lock_timeout(pctl->hwlock, HWSPINLOCK_TIMEOUT);
-
- if (err) {
- dev_err(pctl->dev, "Can't get hwspinlock\n");
- goto unlock;
+ if (pctl->hwlock) {
+ err = hwspin_lock_timeout_in_atomic(pctl->hwlock,
+ HWSPNLCK_TIMEOUT);
+ if (err) {
+ dev_err(pctl->dev, "Can't get hwspinlock\n");
+ goto unlock;
+ }
}
val = readl_relaxed(bank->base + STM32_GPIO_TYPER);
@@ -883,7 +887,7 @@ static int stm32_pconf_set_driving(struct stm32_gpio_bank *bank,
writel_relaxed(val, bank->base + STM32_GPIO_TYPER);
if (pctl->hwlock)
- hwspin_unlock(pctl->hwlock);
+ hwspin_unlock_in_atomic(pctl->hwlock);
stm32_gpio_backup_driving(bank, offset, drive);
@@ -923,12 +927,13 @@ static int stm32_pconf_set_speed(struct stm32_gpio_bank *bank,
clk_enable(bank->clk);
spin_lock_irqsave(&bank->lock, flags);
- if (pctl->hwlock)
- err = hwspin_lock_timeout(pctl->hwlock, HWSPINLOCK_TIMEOUT);
-
- if (err) {
- dev_err(pctl->dev, "Can't get hwspinlock\n");
- goto unlock;
+ if (pctl->hwlock) {
+ err = hwspin_lock_timeout_in_atomic(pctl->hwlock,
+ HWSPNLCK_TIMEOUT);
+ if (err) {
+ dev_err(pctl->dev, "Can't get hwspinlock\n");
+ goto unlock;
+ }
}
val = readl_relaxed(bank->base + STM32_GPIO_SPEEDR);
@@ -937,7 +942,7 @@ static int stm32_pconf_set_speed(struct stm32_gpio_bank *bank,
writel_relaxed(val, bank->base + STM32_GPIO_SPEEDR);
if (pctl->hwlock)
- hwspin_unlock(pctl->hwlock);
+ hwspin_unlock_in_atomic(pctl->hwlock);
stm32_gpio_backup_speed(bank, offset, speed);
@@ -977,12 +982,13 @@ static int stm32_pconf_set_bias(struct stm32_gpio_bank *bank,
clk_enable(bank->clk);
spin_lock_irqsave(&bank->lock, flags);
- if (pctl->hwlock)
- err = hwspin_lock_timeout(pctl->hwlock, HWSPINLOCK_TIMEOUT);
-
- if (err) {
- dev_err(pctl->dev, "Can't get hwspinlock\n");
- goto unlock;
+ if (pctl->hwlock) {
+ err = hwspin_lock_timeout_in_atomic(pctl->hwlock,
+ HWSPNLCK_TIMEOUT);
+ if (err) {
+ dev_err(pctl->dev, "Can't get hwspinlock\n");
+ goto unlock;
+ }
}
val = readl_relaxed(bank->base + STM32_GPIO_PUPDR);
@@ -991,7 +997,7 @@ static int stm32_pconf_set_bias(struct stm32_gpio_bank *bank,
writel_relaxed(val, bank->base + STM32_GPIO_PUPDR);
if (pctl->hwlock)
- hwspin_unlock(pctl->hwlock);
+ hwspin_unlock_in_atomic(pctl->hwlock);
stm32_gpio_backup_bias(bank, offset, bias);
--
2.17.1
next reply other threads:[~2020-06-15 12:45 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-15 12:44 Alexandre Torgue [this message]
2020-07-23 13:20 ` [PATCH] pinctrl: stm32: use the hwspin_lock_timeout_in_atomic() API Linus Walleij
2020-07-23 14:02 ` Alexandre Torgue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200615124456.27328-1-alexandre.torgue@st.com \
--to=alexandre.torgue@st.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).