[PATCH V7 0/4] Add APSS clock controller support for IPQ6018

[PATCH V7 0/4] Add APSS clock controller support for IPQ6018

[Sivaprakash Murugesan]

The CPU on Qualcomm's IPQ6018 devices are primarily fed by APSS PLL and XO,
these are connected to a clock mux and enable block.

This patch series adds support for these clocks and inturn enables clocks
required for CPU freq.

[V7]
 * Removed dts patch from this series, will send that separately
 * Addressed Rob's minor comment on the binding
 * Patch 1 depends on a53 pll bindings
   https://lkml.org/lkml/2020/5/4/60
[V6]
 * Split mailbox driver from this series, mailbox changes will sent as a
   separate series
 * Addressed review comments from Stephen
[V5]
 * Addressed Bjorn comments on apss clk and dt-bindings
 * Patch 2 depends on a53 pll dt-bindings
   https://www.spinics.net/lists/linux-clk/msg48358.html  
[V4]
 * Re-written PLL found on IPQ platforms as a separate driver
 * Addressed stephen's comments on apss clock controller and pll
 * Addressed Rob's review comments on bindings
 * moved a53 pll binding from this series as it is not applicable, will send
   it separately.
[V3]
 * Fixed dt binding check error in patch2
   dt-bindings: clock: Add YAML schemas for QCOM A53 PLL
[V2]
 * Restructred the patch series as there are two different HW blocks,
   the mux and enable belongs to the apcs block and PLL has a separate HW
   block.
 * Converted qcom mailbox and qcom a53 pll documentation to yaml.
 * Addressed review comments from Stephen, Rob and Sibi where it is applicable.
 * Changed this cover letter to state the purpose of this patch series

Sivaprakash Murugesan (4):
  dt-bindings: clock: add ipq6018 a53 pll compatible
  clk: qcom: Add ipq apss pll driver
  clk: qcom: Add DT bindings for ipq6018 apss clock controller
  clk: qcom: Add ipq6018 apss clock controller

 .../devicetree/bindings/clock/qcom,a53pll.yaml     |  18 ++++
 drivers/clk/qcom/Kconfig                           |  19 ++++
 drivers/clk/qcom/Makefile                          |   2 +
 drivers/clk/qcom/apss-ipq-pll.c                    |  95 ++++++++++++++++++
 drivers/clk/qcom/apss-ipq6018.c                    | 106 +++++++++++++++++++++
 include/dt-bindings/clock/qcom,apss-ipq.h          |  12 +++
 6 files changed, 252 insertions(+)
 create mode 100644 drivers/clk/qcom/apss-ipq-pll.c
 create mode 100644 drivers/clk/qcom/apss-ipq6018.c
 create mode 100644 include/dt-bindings/clock/qcom,apss-ipq.h

-- 
2.7.4

[PATCH V7 1/4] dt-bindings: clock: add ipq6018 a53 pll compatible

[Sivaprakash Murugesan]

cpus on ipq6018 are clocked by a53 pll, add device compatible for a53
pll found on ipq6018 devices.

Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
---
[V7]
 * Addressed minor review comment from Rob
 .../devicetree/bindings/clock/qcom,a53pll.yaml         | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
index 20d2638..3161fab 100644
--- a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
@@ -15,6 +15,7 @@ description:
 
 properties:
   compatible:
+    const: qcom,ipq6018-a53pll
     const: qcom,msm8916-a53pll
 
   reg:
@@ -23,6 +24,14 @@ properties:
   '#clock-cells':
     const: 0
 
+  clocks:
+    items:
+      - description: board XO clock
+
+  clock-names:
+    items:
+      - const: xo
+
 required:
   - compatible
   - reg
@@ -38,3 +47,12 @@ examples:
         reg = <0xb016000 0x40>;
         #clock-cells = <0>;
     };
+  #Example 2 - A53 PLL found on IPQ6018 devices
+  - |
+    a53pll_ipq: clock-controller@b116000 {
+        compatible = "qcom,ipq6018-a53pll";
+        reg = <0x0b116000 0x40>;
+        #clock-cells = <0>;
+        clocks = <&xo>;
+        clock-names = "xo";
+    };
-- 
2.7.4

[PATCH V7 2/4] clk: qcom: Add ipq apss pll driver

[Sivaprakash Murugesan]

The CPUs on Qualcomm ipq based devices are clocked by an alpha PLL.
Add support for the apss pll found on ipq based devices which can
support CPU frequencies above 1Ghz.

Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
---
 drivers/clk/qcom/Kconfig        |  8 ++++
 drivers/clk/qcom/Makefile       |  1 +
 drivers/clk/qcom/apss-ipq-pll.c | 95 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 104 insertions(+)
 create mode 100644 drivers/clk/qcom/apss-ipq-pll.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index abb121f..ee668eb 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -89,6 +89,14 @@ config APQ_MMCC_8084
 	  Say Y if you want to support multimedia devices such as display,
 	  graphics, video encode/decode, camera, etc.
 
+config IPQ_APSS_PLL
+	tristate "IPQ APSS PLL"
+	help
+	  Support for APSS PLL on ipq devices. The APSS PLL is the main
+	  clock that feeds the CPUs on ipq based devices.
+	  Say Y if you want to support CPU frequency scaling on ipq based
+	  devices.
+
 config IPQ_GCC_4019
 	tristate "IPQ4019 Global Clock Controller"
 	help
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 691efbf..b4a6ba1 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -19,6 +19,7 @@ clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
 # Keep alphabetically sorted by config
 obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
 obj-$(CONFIG_APQ_MMCC_8084) += mmcc-apq8084.o
+obj-$(CONFIG_IPQ_APSS_PLL) += apss-ipq-pll.o
 obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o
 obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o
 obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
new file mode 100644
index 0000000..e34f4cd
--- /dev/null
+++ b/drivers/clk/qcom/apss-ipq-pll.c
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "clk-alpha-pll.h"
+
+static const u8 ipq_pll_offsets[] = {
+	[PLL_OFF_L_VAL] = 0x08,
+	[PLL_OFF_ALPHA_VAL] = 0x10,
+	[PLL_OFF_USER_CTL] = 0x18,
+	[PLL_OFF_CONFIG_CTL] = 0x20,
+	[PLL_OFF_CONFIG_CTL_U] = 0x24,
+	[PLL_OFF_STATUS] = 0x28,
+	[PLL_OFF_TEST_CTL] = 0x30,
+	[PLL_OFF_TEST_CTL_U] = 0x34,
+};
+
+static struct clk_alpha_pll ipq_pll = {
+	.offset = 0x0,
+	.regs = ipq_pll_offsets,
+	.flags = SUPPORTS_DYNAMIC_UPDATE,
+	.clkr = {
+		.enable_reg = 0x0,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "a53pll",
+			.parent_data = &(const struct clk_parent_data) {
+				.fw_name = "xo",
+			},
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_huayra_ops,
+		},
+	},
+};
+
+static const struct alpha_pll_config ipq_pll_config = {
+	.l = 0x37,
+	.config_ctl_val = 0x04141200,
+	.config_ctl_hi_val = 0x0,
+	.early_output_mask = BIT(3),
+	.main_output_mask = BIT(0),
+};
+
+static const struct regmap_config ipq_pll_regmap_config = {
+	.reg_bits		= 32,
+	.reg_stride		= 4,
+	.val_bits		= 32,
+	.max_register		= 0x40,
+	.fast_io		= true,
+};
+
+static int apss_ipq_pll_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct regmap *regmap;
+	void __iomem *base;
+	int ret;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	regmap = devm_regmap_init_mmio(dev, base, &ipq_pll_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	clk_alpha_pll_configure(&ipq_pll, regmap, &ipq_pll_config);
+
+	ret = devm_clk_register_regmap(dev, &ipq_pll.clkr);
+	if (ret)
+		return ret;
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
+							&ipq_pll.clkr.hw);
+}
+
+static const struct of_device_id apss_ipq_pll_match_table[] = {
+	{ .compatible = "qcom,ipq6018-a53pll" },
+	{ }
+};
+
+static struct platform_driver apss_ipq_pll_driver = {
+	.probe = apss_ipq_pll_probe,
+	.driver = {
+		.name = "qcom-ipq-apss-pll",
+		.of_match_table = apss_ipq_pll_match_table,
+	},
+};
+module_platform_driver(apss_ipq_pll_driver);
+
+MODULE_DESCRIPTION("Qualcomm technology Inc APSS ALPHA PLL Driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4

[PATCH V7 3/4] clk: qcom: Add DT bindings for ipq6018 apss clock controller

[Sivaprakash Murugesan]

Add dt-binding for ipq6018 apss clock controller

Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
---
 include/dt-bindings/clock/qcom,apss-ipq.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)
 create mode 100644 include/dt-bindings/clock/qcom,apss-ipq.h

diff --git a/include/dt-bindings/clock/qcom,apss-ipq.h b/include/dt-bindings/clock/qcom,apss-ipq.h
new file mode 100644
index 0000000..77b6e05
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,apss-ipq.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_QCA_APSS_IPQ6018_H
+#define _DT_BINDINGS_CLOCK_QCA_APSS_IPQ6018_H
+
+#define APCS_ALIAS0_CLK_SRC			0
+#define APCS_ALIAS0_CORE_CLK			1
+
+#endif
-- 
2.7.4

[PATCH V7 4/4] clk: qcom: Add ipq6018 apss clock controller

[Sivaprakash Murugesan]

The CPU on Qualcomm ipq6018 devices are clocked primarily by a aplha PLL
and xo which are connected to a mux and enable block.

Add support for the mux and enable block which feeds the CPU on ipq6018
devices.

Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
---
 drivers/clk/qcom/Kconfig        |  11 +++++
 drivers/clk/qcom/Makefile       |   1 +
 drivers/clk/qcom/apss-ipq6018.c | 106 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 118 insertions(+)
 create mode 100644 drivers/clk/qcom/apss-ipq6018.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index ee668eb..080f447 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -97,6 +97,17 @@ config IPQ_APSS_PLL
 	  Say Y if you want to support CPU frequency scaling on ipq based
 	  devices.
 
+config IPQ_APSS_6018
+	tristate "IPQ APSS Clock Controller"
+	select IPQ_APSS_PLL
+	depends on QCOM_APCS_IPC || COMPILE_TEST
+	help
+	  Support for APSS clock controller on IPQ platforms. The
+	  APSS clock controller manages the Mux and enable block that feeds the
+	  CPUs.
+	  Say Y if you want to support CPU frequency scaling on
+	  ipq based devices.
+
 config IPQ_GCC_4019
 	tristate "IPQ4019 Global Clock Controller"
 	help
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index b4a6ba1..3accea1 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -20,6 +20,7 @@ clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
 obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
 obj-$(CONFIG_APQ_MMCC_8084) += mmcc-apq8084.o
 obj-$(CONFIG_IPQ_APSS_PLL) += apss-ipq-pll.o
+obj-$(CONFIG_IPQ_APSS_6018) += apss-ipq6018.o
 obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o
 obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o
 obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
diff --git a/drivers/clk/qcom/apss-ipq6018.c b/drivers/clk/qcom/apss-ipq6018.c
new file mode 100644
index 0000000..004f7e1
--- /dev/null
+++ b/drivers/clk/qcom/apss-ipq6018.c
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+#include <linux/module.h>
+
+#include <dt-bindings/clock/qcom,apss-ipq.h>
+
+#include "common.h"
+#include "clk-regmap.h"
+#include "clk-branch.h"
+#include "clk-alpha-pll.h"
+#include "clk-regmap-mux.h"
+
+enum {
+	P_XO,
+	P_APSS_PLL_EARLY,
+};
+
+static const struct clk_parent_data parents_apcs_alias0_clk_src[] = {
+	{ .fw_name = "xo" },
+	{ .fw_name = "pll" },
+};
+
+static const struct parent_map parents_apcs_alias0_clk_src_map[] = {
+	{ P_XO, 0 },
+	{ P_APSS_PLL_EARLY, 5 },
+};
+
+static struct clk_regmap_mux apcs_alias0_clk_src = {
+	.reg = 0x0050,
+	.width = 3,
+	.shift = 7,
+	.parent_map = parents_apcs_alias0_clk_src_map,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "apcs_alias0_clk_src",
+		.parent_data = parents_apcs_alias0_clk_src,
+		.num_parents = 2,
+		.ops = &clk_regmap_mux_closest_ops,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_branch apcs_alias0_core_clk = {
+	.halt_reg = 0x0058,
+	.clkr = {
+		.enable_reg = 0x0058,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "apcs_alias0_core_clk",
+			.parent_hws = (const struct clk_hw *[]){
+				&apcs_alias0_clk_src.clkr.hw },
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static const struct regmap_config apss_ipq6018_regmap_config = {
+	.reg_bits       = 32,
+	.reg_stride     = 4,
+	.val_bits       = 32,
+	.max_register   = 0x1000,
+	.fast_io        = true,
+};
+
+static struct clk_regmap *apss_ipq6018_clks[] = {
+	[APCS_ALIAS0_CLK_SRC] = &apcs_alias0_clk_src.clkr,
+	[APCS_ALIAS0_CORE_CLK] = &apcs_alias0_core_clk.clkr,
+};
+
+static const struct qcom_cc_desc apss_ipq6018_desc = {
+	.config = &apss_ipq6018_regmap_config,
+	.clks = apss_ipq6018_clks,
+	.num_clks = ARRAY_SIZE(apss_ipq6018_clks),
+};
+
+static int apss_ipq6018_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap;
+
+	regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	return qcom_cc_really_probe(pdev, &apss_ipq6018_desc, regmap);
+}
+
+static struct platform_driver apss_ipq6018_driver = {
+	.probe = apss_ipq6018_probe,
+	.driver = {
+		.name   = "qcom,apss-ipq6018-clk",
+	},
+};
+
+module_platform_driver(apss_ipq6018_driver);
+
+MODULE_DESCRIPTION("QCOM APSS IPQ 6018 CLK Driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4

Re: [PATCH V7 3/4] clk: qcom: Add DT bindings for ipq6018 apss clock controller

[Rob Herring]

On Sat, 06 Jun 2020 16:25:06 +0530, Sivaprakash Murugesan wrote:
> Add dt-binding for ipq6018 apss clock controller
> 
> Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
> ---
>  include/dt-bindings/clock/qcom,apss-ipq.h | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
>  create mode 100644 include/dt-bindings/clock/qcom,apss-ipq.h
> 


Please add Acked-by/Reviewed-by tags when posting new versions. However,
there's no need to repost patches *only* to add the tags. The upstream
maintainer will do that for acks received on the version they apply.

If a tag was not added on purpose, please state why and what changed.

Re: [PATCH V7 1/4] dt-bindings: clock: add ipq6018 a53 pll compatible

[Rob Herring]

On Sat, 06 Jun 2020 16:25:04 +0530, Sivaprakash Murugesan wrote:
> cpus on ipq6018 are clocked by a53 pll, add device compatible for a53
> pll found on ipq6018 devices.
> 
> Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
> ---
> [V7]
>  * Addressed minor review comment from Rob
>  .../devicetree/bindings/clock/qcom,a53pll.yaml         | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH V7 0/4] Add APSS clock controller support for IPQ6018

[Sivaprakash Murugesan]

Ping!

Hi Stephen,

Is it possible for you to review this series? We have regulators and few 
other patches

depend on this patch, it would be great if you could provide your inputs 
on this.

Thanks,

Siva

On 6/6/2020 4:25 PM, Sivaprakash Murugesan wrote:
> The CPU on Qualcomm's IPQ6018 devices are primarily fed by APSS PLL and XO,
> these are connected to a clock mux and enable block.
>
> This patch series adds support for these clocks and inturn enables clocks
> required for CPU freq.
>
> [V7]
>   * Removed dts patch from this series, will send that separately
>   * Addressed Rob's minor comment on the binding
>   * Patch 1 depends on a53 pll bindings
>     https://lkml.org/lkml/2020/5/4/60
> [V6]
>   * Split mailbox driver from this series, mailbox changes will sent as a
>     separate series
>   * Addressed review comments from Stephen
> [V5]
>   * Addressed Bjorn comments on apss clk and dt-bindings
>   * Patch 2 depends on a53 pll dt-bindings
>     https://www.spinics.net/lists/linux-clk/msg48358.html
> [V4]
>   * Re-written PLL found on IPQ platforms as a separate driver
>   * Addressed stephen's comments on apss clock controller and pll
>   * Addressed Rob's review comments on bindings
>   * moved a53 pll binding from this series as it is not applicable, will send
>     it separately.
> [V3]
>   * Fixed dt binding check error in patch2
>     dt-bindings: clock: Add YAML schemas for QCOM A53 PLL
> [V2]
>   * Restructred the patch series as there are two different HW blocks,
>     the mux and enable belongs to the apcs block and PLL has a separate HW
>     block.
>   * Converted qcom mailbox and qcom a53 pll documentation to yaml.
>   * Addressed review comments from Stephen, Rob and Sibi where it is applicable.
>   * Changed this cover letter to state the purpose of this patch series
>
> Sivaprakash Murugesan (4):
>    dt-bindings: clock: add ipq6018 a53 pll compatible
>    clk: qcom: Add ipq apss pll driver
>    clk: qcom: Add DT bindings for ipq6018 apss clock controller
>    clk: qcom: Add ipq6018 apss clock controller
>
>   .../devicetree/bindings/clock/qcom,a53pll.yaml     |  18 ++++
>   drivers/clk/qcom/Kconfig                           |  19 ++++
>   drivers/clk/qcom/Makefile                          |   2 +
>   drivers/clk/qcom/apss-ipq-pll.c                    |  95 ++++++++++++++++++
>   drivers/clk/qcom/apss-ipq6018.c                    | 106 +++++++++++++++++++++
>   include/dt-bindings/clock/qcom,apss-ipq.h          |  12 +++
>   6 files changed, 252 insertions(+)
>   create mode 100644 drivers/clk/qcom/apss-ipq-pll.c
>   create mode 100644 drivers/clk/qcom/apss-ipq6018.c
>   create mode 100644 include/dt-bindings/clock/qcom,apss-ipq.h
>

Re: [PATCH V7 0/4] Add APSS clock controller support for IPQ6018

[Stephen Boyd]

Quoting Sivaprakash Murugesan (2020-06-18 00:00:58)
> Ping!
> 
> Hi Stephen,
> 
> Is it possible for you to review this series? We have regulators and few 
> other patches

regulators depend on CPU clk patches?

> 
> depend on this patch, it would be great if you could provide your inputs 
> on this.
>

Re: [PATCH V7 1/4] dt-bindings: clock: add ipq6018 a53 pll compatible

[Stephen Boyd]

Quoting Sivaprakash Murugesan (2020-06-06 03:55:04)
> cpus on ipq6018 are clocked by a53 pll, add device compatible for a53
> pll found on ipq6018 devices.
> 
> Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
> ---
> [V7]
>  * Addressed minor review comment from Rob
>  .../devicetree/bindings/clock/qcom,a53pll.yaml         | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
> index 20d2638..3161fab 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
> @@ -15,6 +15,7 @@ description:
>  
>  properties:
>    compatible:
> +    const: qcom,ipq6018-a53pll
>      const: qcom,msm8916-a53pll
>  
>    reg:

I'm getting this error when running dt binding check:

ruamel.yaml.constructor.DuplicateKeyError: while constructing a mapping
  in "<unicode string>", line 18, column 5
found duplicate key "const" with value "qcom,msm8916-a53pll" (original value: "qcom,ipq6018-a53pll")
  in "<unicode string>", line 19, column 5

Re: [PATCH V7 1/4] dt-bindings: clock: add ipq6018 a53 pll compatible

[Sivaprakash Murugesan]

On 6/20/2020 6:06 AM, Stephen Boyd wrote:
> Quoting Sivaprakash Murugesan (2020-06-06 03:55:04)
>> cpus on ipq6018 are clocked by a53 pll, add device compatible for a53
>> pll found on ipq6018 devices.
>>
>> Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
>> ---
>> [V7]
>>   * Addressed minor review comment from Rob
>>   .../devicetree/bindings/clock/qcom,a53pll.yaml         | 18 ++++++++++++++++++
>>   1 file changed, 18 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
>> index 20d2638..3161fab 100644
>> --- a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
>> +++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
>> @@ -15,6 +15,7 @@ description:
>>   
>>   properties:
>>     compatible:
>> +    const: qcom,ipq6018-a53pll
>>       const: qcom,msm8916-a53pll
>>   
>>     reg:
> I'm getting this error when running dt binding check:
>
> ruamel.yaml.constructor.DuplicateKeyError: while constructing a mapping
>    in "<unicode string>", line 18, column 5
> found duplicate key "const" with value "qcom,msm8916-a53pll" (original value: "qcom,ipq6018-a53pll")
>    in "<unicode string>", line 19, column 5

This error started coming after updating the dt-schema version.

Guess I need to replace const with enum to get rid of this error.

will address this.

Re: [PATCH V7 3/4] clk: qcom: Add DT bindings for ipq6018 apss clock controller

[Stephen Boyd]

Quoting Sivaprakash Murugesan (2020-06-06 03:55:06)
> Add dt-binding for ipq6018 apss clock controller
> 
> Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
> ---

Please pick up Rob's tag when resending this.