linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [RESEND PATCH v4 0/7] Convert mtk-dsi to drm_bridge API and get EDID for ps8640 bridge
@ 2020-06-15 20:31 Enric Balletbo i Serra
  2020-06-15 20:31 ` [RESEND PATCH v4 1/7] drm/bridge: ps8640: Get the EDID from eDP control Enric Balletbo i Serra
                   ` (7 more replies)
  0 siblings, 8 replies; 18+ messages in thread
From: Enric Balletbo i Serra @ 2020-06-15 20:31 UTC (permalink / raw)
  To: linux-kernel, Collabora Kernel ML
  Cc: matthias.bgg, drinkcat, hsinyi, laurent.pinchart, Andrzej Hajda,
	Chun-Kuang Hu, Daniel Vetter, David Airlie, Jernej Skrabec,
	Jonas Karlman, Laurent Pinchart, Maarten Lankhorst,
	Maxime Ripard, Neil Armstrong, Philipp Zabel, Thomas Zimmermann,
	dri-devel, linux-arm-kernel, linux-mediatek

(This resend is to fix some trivial conflicts due the merge window)

The PS8640 dsi-to-eDP bridge driver is using the panel bridge API,
however, not all the components in the chain have been ported to the
drm_bridge API. Actually, when a panel is attached the default panel's mode
is used, but in some cases we can't get display up if mode getting from
eDP control EDID is not chosen.

This series address that problem, first implements the .get_edid()
callback in the PS8640 driver (which is not used until the conversion is
done) and then, converts the Mediatek DSI driver to use the drm_bridge
API.

As far as I know, we're the only users of the mediatek dsi driver in
mainline, so should be safe to switch to the new chain of drm_bridge API
unconditionally.

The patches has been tested on a Acer Chromebook R13 (Elm) running a
Chrome OS userspace and checking that the valid EDID mode reported by
the bridge is selected.

Changes in v4:
- Remove double call to drm_encoder_init(). (Chun-Kuang Hu)
- Cleanup the encoder in mtk_dsi_unbind(). (Chun-Kuang Hu)

Changes in v3:
- Replace s/bridge/next bridge/ for comment. (Laurent Pinchart)
- Add the bridge.type. (Laurent Pinchart)
- Use next_bridge field to store the panel bridge. (Laurent Pinchart)
- Add the bridge.type field. (Laurent Pinchart)
- This patch requires https://lkml.org/lkml/2020/4/16/2080 to work
  properly.
- Move the bridge.type line to the patch that adds drm_bridge support. (Laurent Pinchart)

Changes in v2:
- Do not set connector_type for panel here. (Sam Ravnborg)

Enric Balletbo i Serra (7):
  drm/bridge: ps8640: Get the EDID from eDP control
  drm/bridge_connector: Set default status connected for eDP connectors
  drm/mediatek: mtk_dsi: Rename bridge to next_bridge
  drm/mediatek: mtk_dsi: Convert to bridge driver
  drm/mediatek: mtk_dsi: Use simple encoder
  drm/mediatek: mtk_dsi: Use the drm_panel_bridge API
  drm/mediatek: mtk_dsi: Create connector for bridges

 drivers/gpu/drm/bridge/parade-ps8640.c |  12 ++
 drivers/gpu/drm/drm_bridge_connector.c |   1 +
 drivers/gpu/drm/mediatek/mtk_dsi.c     | 269 ++++++++-----------------
 3 files changed, 97 insertions(+), 185 deletions(-)

-- 
2.27.0


^ permalink raw reply	[flat|nested] 18+ messages in thread

* [RESEND PATCH v4 1/7] drm/bridge: ps8640: Get the EDID from eDP control
  2020-06-15 20:31 [RESEND PATCH v4 0/7] Convert mtk-dsi to drm_bridge API and get EDID for ps8640 bridge Enric Balletbo i Serra
@ 2020-06-15 20:31 ` Enric Balletbo i Serra
  2020-06-15 20:31 ` [RESEND PATCH v4 2/7] drm/bridge_connector: Set default status connected for eDP connectors Enric Balletbo i Serra
                   ` (6 subsequent siblings)
  7 siblings, 0 replies; 18+ messages in thread
From: Enric Balletbo i Serra @ 2020-06-15 20:31 UTC (permalink / raw)
  To: linux-kernel, Collabora Kernel ML
  Cc: matthias.bgg, drinkcat, hsinyi, laurent.pinchart, Sam Ravnborg,
	Andrzej Hajda, Daniel Vetter, David Airlie, Jernej Skrabec,
	Jonas Karlman, Laurent Pinchart, Neil Armstrong, dri-devel

The PS8640 DSI-to-eDP bridge can retrieve the EDID, so implement the
.get_edid callback and set the flag to indicate the core to use it.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 drivers/gpu/drm/bridge/parade-ps8640.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c
index 4b099196afeba..13755d278db6d 100644
--- a/drivers/gpu/drm/bridge/parade-ps8640.c
+++ b/drivers/gpu/drm/bridge/parade-ps8640.c
@@ -242,8 +242,18 @@ static int ps8640_bridge_attach(struct drm_bridge *bridge,
 	return ret;
 }
 
+static struct edid *ps8640_bridge_get_edid(struct drm_bridge *bridge,
+					   struct drm_connector *connector)
+{
+	struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
+
+	return drm_get_edid(connector,
+			    ps_bridge->page[PAGE0_DP_CNTL]->adapter);
+}
+
 static const struct drm_bridge_funcs ps8640_bridge_funcs = {
 	.attach = ps8640_bridge_attach,
+	.get_edid = ps8640_bridge_get_edid,
 	.post_disable = ps8640_post_disable,
 	.pre_enable = ps8640_pre_enable,
 };
@@ -294,6 +304,8 @@ static int ps8640_probe(struct i2c_client *client)
 
 	ps_bridge->bridge.funcs = &ps8640_bridge_funcs;
 	ps_bridge->bridge.of_node = dev->of_node;
+	ps_bridge->bridge.ops = DRM_BRIDGE_OP_EDID;
+	ps_bridge->bridge.type = DRM_MODE_CONNECTOR_eDP;
 
 	ps_bridge->page[PAGE0_DP_CNTL] = client;
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [RESEND PATCH v4 2/7] drm/bridge_connector: Set default status connected for eDP connectors
  2020-06-15 20:31 [RESEND PATCH v4 0/7] Convert mtk-dsi to drm_bridge API and get EDID for ps8640 bridge Enric Balletbo i Serra
  2020-06-15 20:31 ` [RESEND PATCH v4 1/7] drm/bridge: ps8640: Get the EDID from eDP control Enric Balletbo i Serra
@ 2020-06-15 20:31 ` Enric Balletbo i Serra
  2020-06-15 20:31 ` [RESEND PATCH v4 3/7] drm/mediatek: mtk_dsi: Rename bridge to next_bridge Enric Balletbo i Serra
                   ` (5 subsequent siblings)
  7 siblings, 0 replies; 18+ messages in thread
From: Enric Balletbo i Serra @ 2020-06-15 20:31 UTC (permalink / raw)
  To: linux-kernel, Collabora Kernel ML
  Cc: matthias.bgg, drinkcat, hsinyi, laurent.pinchart, Sam Ravnborg,
	Daniel Vetter, David Airlie, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, dri-devel

In an eDP application, HPD is not required and on most bridge chips
useless. If HPD is not used, we need to set initial status as connected,
otherwise the connector created by the drm_bridge_connector API remains
in an unknown state.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 drivers/gpu/drm/drm_bridge_connector.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/drm_bridge_connector.c b/drivers/gpu/drm/drm_bridge_connector.c
index c6994fe673f31..a58cbde59c34a 100644
--- a/drivers/gpu/drm/drm_bridge_connector.c
+++ b/drivers/gpu/drm/drm_bridge_connector.c
@@ -187,6 +187,7 @@ drm_bridge_connector_detect(struct drm_connector *connector, bool force)
 		case DRM_MODE_CONNECTOR_DPI:
 		case DRM_MODE_CONNECTOR_LVDS:
 		case DRM_MODE_CONNECTOR_DSI:
+		case DRM_MODE_CONNECTOR_eDP:
 			status = connector_status_connected;
 			break;
 		default:
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [RESEND PATCH v4 3/7] drm/mediatek: mtk_dsi: Rename bridge to next_bridge
  2020-06-15 20:31 [RESEND PATCH v4 0/7] Convert mtk-dsi to drm_bridge API and get EDID for ps8640 bridge Enric Balletbo i Serra
  2020-06-15 20:31 ` [RESEND PATCH v4 1/7] drm/bridge: ps8640: Get the EDID from eDP control Enric Balletbo i Serra
  2020-06-15 20:31 ` [RESEND PATCH v4 2/7] drm/bridge_connector: Set default status connected for eDP connectors Enric Balletbo i Serra
@ 2020-06-15 20:31 ` Enric Balletbo i Serra
  2020-07-04 23:20   ` Chun-Kuang Hu
  2020-06-15 20:31 ` [RESEND PATCH v4 4/7] drm/mediatek: mtk_dsi: Convert to bridge driver Enric Balletbo i Serra
                   ` (4 subsequent siblings)
  7 siblings, 1 reply; 18+ messages in thread
From: Enric Balletbo i Serra @ 2020-06-15 20:31 UTC (permalink / raw)
  To: linux-kernel, Collabora Kernel ML
  Cc: matthias.bgg, drinkcat, hsinyi, laurent.pinchart, Sam Ravnborg,
	Chun-Kuang Hu, Daniel Vetter, David Airlie, Philipp Zabel,
	dri-devel, linux-arm-kernel, linux-mediatek

This is really a cosmetic change just to make a bit more readable the
code after convert the driver to drm_bridge. The bridge variable name
will be used by the encoder drm_bridge, and the chained bridge will be
named next_bridge.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
---

Changes in v4: None
Changes in v3:
- Replace s/bridge/next bridge/ for comment. (Laurent Pinchart)

Changes in v2: None

 drivers/gpu/drm/mediatek/mtk_dsi.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index 270bf22c98feb..208f49bf14a01 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -183,7 +183,7 @@ struct mtk_dsi {
 	struct drm_encoder encoder;
 	struct drm_connector conn;
 	struct drm_panel *panel;
-	struct drm_bridge *bridge;
+	struct drm_bridge *next_bridge;
 	struct phy *phy;
 
 	void __iomem *regs;
@@ -894,9 +894,10 @@ static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi)
 	 */
 	dsi->encoder.possible_crtcs = 1;
 
-	/* If there's a bridge, attach to it and let it create the connector */
-	if (dsi->bridge) {
-		ret = drm_bridge_attach(&dsi->encoder, dsi->bridge, NULL, 0);
+	/* If there's a next bridge, attach to it and let it create the connector */
+	if (dsi->next_bridge) {
+		ret = drm_bridge_attach(&dsi->encoder, dsi->next_bridge, NULL,
+					0);
 		if (ret) {
 			DRM_ERROR("Failed to attach bridge to drm\n");
 			goto err_encoder_cleanup;
@@ -1177,7 +1178,7 @@ static int mtk_dsi_probe(struct platform_device *pdev)
 	}
 
 	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
-					  &dsi->panel, &dsi->bridge);
+					  &dsi->panel, &dsi->next_bridge);
 	if (ret)
 		goto err_unregister_host;
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [RESEND PATCH v4 4/7] drm/mediatek: mtk_dsi: Convert to bridge driver
  2020-06-15 20:31 [RESEND PATCH v4 0/7] Convert mtk-dsi to drm_bridge API and get EDID for ps8640 bridge Enric Balletbo i Serra
                   ` (2 preceding siblings ...)
  2020-06-15 20:31 ` [RESEND PATCH v4 3/7] drm/mediatek: mtk_dsi: Rename bridge to next_bridge Enric Balletbo i Serra
@ 2020-06-15 20:31 ` Enric Balletbo i Serra
  2020-07-04 23:34   ` Chun-Kuang Hu
  2020-06-15 20:31 ` [RESEND PATCH v4 5/7] drm/mediatek: mtk_dsi: Use simple encoder Enric Balletbo i Serra
                   ` (3 subsequent siblings)
  7 siblings, 1 reply; 18+ messages in thread
From: Enric Balletbo i Serra @ 2020-06-15 20:31 UTC (permalink / raw)
  To: linux-kernel, Collabora Kernel ML
  Cc: matthias.bgg, drinkcat, hsinyi, laurent.pinchart, Sam Ravnborg,
	Chun-Kuang Hu, Daniel Vetter, David Airlie, Philipp Zabel,
	dri-devel, linux-arm-kernel, linux-mediatek

Convert mtk_dsi to a bridge driver with built-in encoder support for
compatibility with existing component drivers.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
---

Changes in v4:
- Remove double call to drm_encoder_init(). (Chun-Kuang Hu)
- Cleanup the encoder in mtk_dsi_unbind(). (Chun-Kuang Hu)

Changes in v3:
- Add the bridge.type. (Laurent Pinchart)

Changes in v2: None

 drivers/gpu/drm/mediatek/mtk_dsi.c | 117 +++++++++++++++++++----------
 1 file changed, 79 insertions(+), 38 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index 208f49bf14a01..759a5b37fb4d2 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -181,6 +181,7 @@ struct mtk_dsi {
 	struct device *dev;
 	struct mipi_dsi_host host;
 	struct drm_encoder encoder;
+	struct drm_bridge bridge;
 	struct drm_connector conn;
 	struct drm_panel *panel;
 	struct drm_bridge *next_bridge;
@@ -206,9 +207,9 @@ struct mtk_dsi {
 	const struct mtk_dsi_driver_data *driver_data;
 };
 
-static inline struct mtk_dsi *encoder_to_dsi(struct drm_encoder *e)
+static inline struct mtk_dsi *bridge_to_dsi(struct drm_bridge *b)
 {
-	return container_of(e, struct mtk_dsi, encoder);
+	return container_of(b, struct mtk_dsi, bridge);
 }
 
 static inline struct mtk_dsi *connector_to_dsi(struct drm_connector *c)
@@ -788,32 +789,52 @@ static void mtk_output_dsi_disable(struct mtk_dsi *dsi)
 	dsi->enabled = false;
 }
 
-static bool mtk_dsi_encoder_mode_fixup(struct drm_encoder *encoder,
-				       const struct drm_display_mode *mode,
-				       struct drm_display_mode *adjusted_mode)
+static void mtk_dsi_encoder_destroy(struct drm_encoder *encoder)
 {
-	return true;
+	drm_encoder_cleanup(encoder);
 }
 
-static void mtk_dsi_encoder_mode_set(struct drm_encoder *encoder,
-				     struct drm_display_mode *mode,
-				     struct drm_display_mode *adjusted)
+static const struct drm_encoder_funcs mtk_dsi_encoder_funcs = {
+	.destroy = mtk_dsi_encoder_destroy,
+};
+
+static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi);
+static void mtk_dsi_destroy_conn_enc(struct mtk_dsi *dsi);
+
+static int mtk_dsi_bridge_attach(struct drm_bridge *bridge,
+				 enum drm_bridge_attach_flags flags)
+{
+	struct mtk_dsi *dsi = bridge_to_dsi(bridge);
+
+	return mtk_dsi_create_conn_enc(bridge->dev, dsi);
+}
+
+static void mtk_dsi_bridge_detach(struct drm_bridge *bridge)
 {
-	struct mtk_dsi *dsi = encoder_to_dsi(encoder);
+	struct mtk_dsi *dsi = bridge_to_dsi(bridge);
+
+	mtk_dsi_destroy_conn_enc(dsi);
+}
+
+static void mtk_dsi_bridge_mode_set(struct drm_bridge *bridge,
+				    const struct drm_display_mode *mode,
+				    const struct drm_display_mode *adjusted)
+{
+	struct mtk_dsi *dsi = bridge_to_dsi(bridge);
 
 	drm_display_mode_to_videomode(adjusted, &dsi->vm);
 }
 
-static void mtk_dsi_encoder_disable(struct drm_encoder *encoder)
+static void mtk_dsi_bridge_disable(struct drm_bridge *bridge)
 {
-	struct mtk_dsi *dsi = encoder_to_dsi(encoder);
+	struct mtk_dsi *dsi = bridge_to_dsi(bridge);
 
 	mtk_output_dsi_disable(dsi);
 }
 
-static void mtk_dsi_encoder_enable(struct drm_encoder *encoder)
+static void mtk_dsi_bridge_enable(struct drm_bridge *bridge)
 {
-	struct mtk_dsi *dsi = encoder_to_dsi(encoder);
+	struct mtk_dsi *dsi = bridge_to_dsi(bridge);
 
 	mtk_output_dsi_enable(dsi);
 }
@@ -825,11 +846,12 @@ static int mtk_dsi_connector_get_modes(struct drm_connector *connector)
 	return drm_panel_get_modes(dsi->panel, connector);
 }
 
-static const struct drm_encoder_helper_funcs mtk_dsi_encoder_helper_funcs = {
-	.mode_fixup = mtk_dsi_encoder_mode_fixup,
-	.mode_set = mtk_dsi_encoder_mode_set,
-	.disable = mtk_dsi_encoder_disable,
-	.enable = mtk_dsi_encoder_enable,
+static const struct drm_bridge_funcs mtk_dsi_bridge_funcs = {
+	.attach = mtk_dsi_bridge_attach,
+	.detach = mtk_dsi_bridge_detach,
+	.disable = mtk_dsi_bridge_disable,
+	.enable = mtk_dsi_bridge_enable,
+	.mode_set = mtk_dsi_bridge_mode_set,
 };
 
 static const struct drm_connector_funcs mtk_dsi_connector_funcs = {
@@ -880,20 +902,6 @@ static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi)
 {
 	int ret;
 
-	ret = drm_simple_encoder_init(drm, &dsi->encoder,
-				      DRM_MODE_ENCODER_DSI);
-	if (ret) {
-		DRM_ERROR("Failed to encoder init to drm\n");
-		return ret;
-	}
-	drm_encoder_helper_add(&dsi->encoder, &mtk_dsi_encoder_helper_funcs);
-
-	/*
-	 * Currently display data paths are statically assigned to a crtc each.
-	 * crtc 0 is OVL0 -> COLOR0 -> AAL -> OD -> RDMA0 -> UFOE -> DSI0
-	 */
-	dsi->encoder.possible_crtcs = 1;
-
 	/* If there's a next bridge, attach to it and let it create the connector */
 	if (dsi->next_bridge) {
 		ret = drm_bridge_attach(&dsi->encoder, dsi->next_bridge, NULL,
@@ -1115,6 +1123,34 @@ static const struct mipi_dsi_host_ops mtk_dsi_ops = {
 	.transfer = mtk_dsi_host_transfer,
 };
 
+static int mtk_dsi_encoder_init(struct drm_device *drm, struct mtk_dsi *dsi)
+{
+	int ret;
+
+	ret = drm_encoder_init(drm, &dsi->encoder, &mtk_dsi_encoder_funcs,
+			       DRM_MODE_ENCODER_DSI, NULL);
+	if (ret) {
+		DRM_ERROR("Failed to encoder init to drm\n");
+		return ret;
+	}
+
+	/*
+	 * Currently display data paths are statically assigned to a crtc each.
+	 * crtc 0 is OVL0 -> COLOR0 -> AAL -> OD -> RDMA0 -> UFOE -> DSI0
+	 */
+	dsi->encoder.possible_crtcs = 1;
+
+	ret = drm_bridge_attach(&dsi->encoder, &dsi->bridge, NULL, 0);
+	if (ret)
+		goto err_cleanup_encoder;
+
+	return 0;
+
+err_cleanup_encoder:
+	drm_encoder_cleanup(&dsi->encoder);
+	return ret;
+}
+
 static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
 {
 	int ret;
@@ -1128,11 +1164,9 @@ static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
 		return ret;
 	}
 
-	ret = mtk_dsi_create_conn_enc(drm, dsi);
-	if (ret) {
-		DRM_ERROR("Encoder create failed with %d\n", ret);
+	ret = mtk_dsi_encoder_init(drm, dsi);
+	if (ret)
 		goto err_unregister;
-	}
 
 	return 0;
 
@@ -1147,7 +1181,7 @@ static void mtk_dsi_unbind(struct device *dev, struct device *master,
 	struct drm_device *drm = data;
 	struct mtk_dsi *dsi = dev_get_drvdata(dev);
 
-	mtk_dsi_destroy_conn_enc(dsi);
+	drm_encoder_cleanup(&dsi->encoder);
 	mtk_ddp_comp_unregister(drm, &dsi->ddp_comp);
 }
 
@@ -1257,6 +1291,12 @@ static int mtk_dsi_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, dsi);
 
+	dsi->bridge.funcs = &mtk_dsi_bridge_funcs;
+	dsi->bridge.of_node = dev->of_node;
+	dsi->bridge.type = DRM_MODE_CONNECTOR_DSI;
+
+	drm_bridge_add(&dsi->bridge);
+
 	ret = component_add(&pdev->dev, &mtk_dsi_component_ops);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add component: %d\n", ret);
@@ -1275,6 +1315,7 @@ static int mtk_dsi_remove(struct platform_device *pdev)
 	struct mtk_dsi *dsi = platform_get_drvdata(pdev);
 
 	mtk_output_dsi_disable(dsi);
+	drm_bridge_remove(&dsi->bridge);
 	component_del(&pdev->dev, &mtk_dsi_component_ops);
 	mipi_dsi_host_unregister(&dsi->host);
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [RESEND PATCH v4 5/7] drm/mediatek: mtk_dsi: Use simple encoder
  2020-06-15 20:31 [RESEND PATCH v4 0/7] Convert mtk-dsi to drm_bridge API and get EDID for ps8640 bridge Enric Balletbo i Serra
                   ` (3 preceding siblings ...)
  2020-06-15 20:31 ` [RESEND PATCH v4 4/7] drm/mediatek: mtk_dsi: Convert to bridge driver Enric Balletbo i Serra
@ 2020-06-15 20:31 ` Enric Balletbo i Serra
  2020-07-04 23:42   ` Chun-Kuang Hu
  2020-06-15 20:31 ` [RESEND PATCH v4 6/7] drm/mediatek: mtk_dsi: Use the drm_panel_bridge API Enric Balletbo i Serra
                   ` (2 subsequent siblings)
  7 siblings, 1 reply; 18+ messages in thread
From: Enric Balletbo i Serra @ 2020-06-15 20:31 UTC (permalink / raw)
  To: linux-kernel, Collabora Kernel ML
  Cc: matthias.bgg, drinkcat, hsinyi, laurent.pinchart, Sam Ravnborg,
	Chun-Kuang Hu, Daniel Vetter, David Airlie, Philipp Zabel,
	dri-devel, linux-arm-kernel, linux-mediatek

The mtk_dsi driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 drivers/gpu/drm/mediatek/mtk_dsi.c | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index 759a5b37fb4d2..e02d16a086ac0 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -789,15 +789,6 @@ static void mtk_output_dsi_disable(struct mtk_dsi *dsi)
 	dsi->enabled = false;
 }
 
-static void mtk_dsi_encoder_destroy(struct drm_encoder *encoder)
-{
-	drm_encoder_cleanup(encoder);
-}
-
-static const struct drm_encoder_funcs mtk_dsi_encoder_funcs = {
-	.destroy = mtk_dsi_encoder_destroy,
-};
-
 static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi);
 static void mtk_dsi_destroy_conn_enc(struct mtk_dsi *dsi);
 
@@ -1127,8 +1118,8 @@ static int mtk_dsi_encoder_init(struct drm_device *drm, struct mtk_dsi *dsi)
 {
 	int ret;
 
-	ret = drm_encoder_init(drm, &dsi->encoder, &mtk_dsi_encoder_funcs,
-			       DRM_MODE_ENCODER_DSI, NULL);
+	ret = drm_simple_encoder_init(drm, &dsi->encoder,
+				      DRM_MODE_ENCODER_DSI);
 	if (ret) {
 		DRM_ERROR("Failed to encoder init to drm\n");
 		return ret;
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [RESEND PATCH v4 6/7] drm/mediatek: mtk_dsi: Use the drm_panel_bridge API
  2020-06-15 20:31 [RESEND PATCH v4 0/7] Convert mtk-dsi to drm_bridge API and get EDID for ps8640 bridge Enric Balletbo i Serra
                   ` (4 preceding siblings ...)
  2020-06-15 20:31 ` [RESEND PATCH v4 5/7] drm/mediatek: mtk_dsi: Use simple encoder Enric Balletbo i Serra
@ 2020-06-15 20:31 ` Enric Balletbo i Serra
  2020-07-04 23:57   ` Chun-Kuang Hu
  2020-06-15 20:31 ` [RESEND PATCH v4 7/7] drm/mediatek: mtk_dsi: Create connector for bridges Enric Balletbo i Serra
  2020-06-20 21:33 ` [RESEND PATCH v4 0/7] Convert mtk-dsi to drm_bridge API and get EDID for ps8640 bridge Sam Ravnborg
  7 siblings, 1 reply; 18+ messages in thread
From: Enric Balletbo i Serra @ 2020-06-15 20:31 UTC (permalink / raw)
  To: linux-kernel, Collabora Kernel ML
  Cc: matthias.bgg, drinkcat, hsinyi, laurent.pinchart, Sam Ravnborg,
	Chun-Kuang Hu, Daniel Vetter, David Airlie, Philipp Zabel,
	dri-devel, linux-arm-kernel, linux-mediatek

Replace the manual panel handling code by a drm_panel_bridge. This
simplifies the driver and allows all components in the display pipeline
to be treated as bridges, paving the way to generic connector handling.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
---

Changes in v4: None
Changes in v3:
- Use next_bridge field to store the panel bridge. (Laurent Pinchart)
- Add the bridge.type field. (Laurent Pinchart)
- This patch requires https://lkml.org/lkml/2020/4/16/2080 to work
  properly.

Changes in v2:
- Do not set connector_type for panel here. (Sam Ravnborg)

 drivers/gpu/drm/mediatek/mtk_dsi.c | 173 +++--------------------------
 1 file changed, 14 insertions(+), 159 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index e02d16a086ac0..4f3bd095c1eee 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -182,8 +182,6 @@ struct mtk_dsi {
 	struct mipi_dsi_host host;
 	struct drm_encoder encoder;
 	struct drm_bridge bridge;
-	struct drm_connector conn;
-	struct drm_panel *panel;
 	struct drm_bridge *next_bridge;
 	struct phy *phy;
 
@@ -212,11 +210,6 @@ static inline struct mtk_dsi *bridge_to_dsi(struct drm_bridge *b)
 	return container_of(b, struct mtk_dsi, bridge);
 }
 
-static inline struct mtk_dsi *connector_to_dsi(struct drm_connector *c)
-{
-	return container_of(c, struct mtk_dsi, conn);
-}
-
 static inline struct mtk_dsi *host_to_dsi(struct mipi_dsi_host *h)
 {
 	return container_of(h, struct mtk_dsi, host);
@@ -682,16 +675,7 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi)
 	mtk_dsi_lane0_ulp_mode_leave(dsi);
 	mtk_dsi_clk_hs_mode(dsi, 0);
 
-	if (dsi->panel) {
-		if (drm_panel_prepare(dsi->panel)) {
-			DRM_ERROR("failed to prepare the panel\n");
-			goto err_disable_digital_clk;
-		}
-	}
-
 	return 0;
-err_disable_digital_clk:
-	clk_disable_unprepare(dsi->digital_clk);
 err_disable_engine_clk:
 	clk_disable_unprepare(dsi->engine_clk);
 err_phy_power_off:
@@ -718,15 +702,7 @@ static void mtk_dsi_poweroff(struct mtk_dsi *dsi)
 	 */
 	mtk_dsi_stop(dsi);
 
-	if (!mtk_dsi_switch_to_cmd_mode(dsi, VM_DONE_INT_FLAG, 500)) {
-		if (dsi->panel) {
-			if (drm_panel_unprepare(dsi->panel)) {
-				DRM_ERROR("failed to unprepare the panel\n");
-				return;
-			}
-		}
-	}
-
+	mtk_dsi_switch_to_cmd_mode(dsi, VM_DONE_INT_FLAG, 500);
 	mtk_dsi_reset_engine(dsi);
 	mtk_dsi_lane0_ulp_mode_enter(dsi);
 	mtk_dsi_clk_ulp_mode_enter(dsi);
@@ -757,19 +733,7 @@ static void mtk_output_dsi_enable(struct mtk_dsi *dsi)
 
 	mtk_dsi_start(dsi);
 
-	if (dsi->panel) {
-		if (drm_panel_enable(dsi->panel)) {
-			DRM_ERROR("failed to enable the panel\n");
-			goto err_dsi_power_off;
-		}
-	}
-
 	dsi->enabled = true;
-
-	return;
-err_dsi_power_off:
-	mtk_dsi_stop(dsi);
-	mtk_dsi_poweroff(dsi);
 }
 
 static void mtk_output_dsi_disable(struct mtk_dsi *dsi)
@@ -777,34 +741,19 @@ static void mtk_output_dsi_disable(struct mtk_dsi *dsi)
 	if (!dsi->enabled)
 		return;
 
-	if (dsi->panel) {
-		if (drm_panel_disable(dsi->panel)) {
-			DRM_ERROR("failed to disable the panel\n");
-			return;
-		}
-	}
-
 	mtk_dsi_poweroff(dsi);
 
 	dsi->enabled = false;
 }
 
-static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi);
-static void mtk_dsi_destroy_conn_enc(struct mtk_dsi *dsi);
-
 static int mtk_dsi_bridge_attach(struct drm_bridge *bridge,
 				 enum drm_bridge_attach_flags flags)
 {
 	struct mtk_dsi *dsi = bridge_to_dsi(bridge);
 
-	return mtk_dsi_create_conn_enc(bridge->dev, dsi);
-}
-
-static void mtk_dsi_bridge_detach(struct drm_bridge *bridge)
-{
-	struct mtk_dsi *dsi = bridge_to_dsi(bridge);
-
-	mtk_dsi_destroy_conn_enc(dsi);
+	/* Attach the panel or bridge to the dsi bridge */
+	return drm_bridge_attach(bridge->encoder, dsi->next_bridge,
+				 &dsi->bridge, flags);
 }
 
 static void mtk_dsi_bridge_mode_set(struct drm_bridge *bridge,
@@ -830,101 +779,13 @@ static void mtk_dsi_bridge_enable(struct drm_bridge *bridge)
 	mtk_output_dsi_enable(dsi);
 }
 
-static int mtk_dsi_connector_get_modes(struct drm_connector *connector)
-{
-	struct mtk_dsi *dsi = connector_to_dsi(connector);
-
-	return drm_panel_get_modes(dsi->panel, connector);
-}
-
 static const struct drm_bridge_funcs mtk_dsi_bridge_funcs = {
 	.attach = mtk_dsi_bridge_attach,
-	.detach = mtk_dsi_bridge_detach,
 	.disable = mtk_dsi_bridge_disable,
 	.enable = mtk_dsi_bridge_enable,
 	.mode_set = mtk_dsi_bridge_mode_set,
 };
 
-static const struct drm_connector_funcs mtk_dsi_connector_funcs = {
-	.fill_modes = drm_helper_probe_single_connector_modes,
-	.destroy = drm_connector_cleanup,
-	.reset = drm_atomic_helper_connector_reset,
-	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
-	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
-};
-
-static const struct drm_connector_helper_funcs
-	mtk_dsi_connector_helper_funcs = {
-	.get_modes = mtk_dsi_connector_get_modes,
-};
-
-static int mtk_dsi_create_connector(struct drm_device *drm, struct mtk_dsi *dsi)
-{
-	int ret;
-
-	ret = drm_connector_init(drm, &dsi->conn, &mtk_dsi_connector_funcs,
-				 DRM_MODE_CONNECTOR_DSI);
-	if (ret) {
-		DRM_ERROR("Failed to connector init to drm\n");
-		return ret;
-	}
-
-	drm_connector_helper_add(&dsi->conn, &mtk_dsi_connector_helper_funcs);
-
-	dsi->conn.dpms = DRM_MODE_DPMS_OFF;
-	drm_connector_attach_encoder(&dsi->conn, &dsi->encoder);
-
-	if (dsi->panel) {
-		ret = drm_panel_attach(dsi->panel, &dsi->conn);
-		if (ret) {
-			DRM_ERROR("Failed to attach panel to drm\n");
-			goto err_connector_cleanup;
-		}
-	}
-
-	return 0;
-
-err_connector_cleanup:
-	drm_connector_cleanup(&dsi->conn);
-	return ret;
-}
-
-static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi)
-{
-	int ret;
-
-	/* If there's a next bridge, attach to it and let it create the connector */
-	if (dsi->next_bridge) {
-		ret = drm_bridge_attach(&dsi->encoder, dsi->next_bridge, NULL,
-					0);
-		if (ret) {
-			DRM_ERROR("Failed to attach bridge to drm\n");
-			goto err_encoder_cleanup;
-		}
-	} else {
-		/* Otherwise create our own connector and attach to a panel */
-		ret = mtk_dsi_create_connector(drm, dsi);
-		if (ret)
-			goto err_encoder_cleanup;
-	}
-
-	return 0;
-
-err_encoder_cleanup:
-	drm_encoder_cleanup(&dsi->encoder);
-	return ret;
-}
-
-static void mtk_dsi_destroy_conn_enc(struct mtk_dsi *dsi)
-{
-	drm_encoder_cleanup(&dsi->encoder);
-	/* Skip connector cleanup if creation was delegated to the bridge */
-	if (dsi->conn.dev)
-		drm_connector_cleanup(&dsi->conn);
-	if (dsi->panel)
-		drm_panel_detach(dsi->panel);
-}
-
 static void mtk_dsi_ddp_start(struct mtk_ddp_comp *comp)
 {
 	struct mtk_dsi *dsi = container_of(comp, struct mtk_dsi, ddp_comp);
@@ -953,20 +814,6 @@ static int mtk_dsi_host_attach(struct mipi_dsi_host *host,
 	dsi->format = device->format;
 	dsi->mode_flags = device->mode_flags;
 
-	if (dsi->conn.dev)
-		drm_helper_hpd_irq_event(dsi->conn.dev);
-
-	return 0;
-}
-
-static int mtk_dsi_host_detach(struct mipi_dsi_host *host,
-			       struct mipi_dsi_device *device)
-{
-	struct mtk_dsi *dsi = host_to_dsi(host);
-
-	if (dsi->conn.dev)
-		drm_helper_hpd_irq_event(dsi->conn.dev);
-
 	return 0;
 }
 
@@ -1110,7 +957,6 @@ static ssize_t mtk_dsi_host_transfer(struct mipi_dsi_host *host,
 
 static const struct mipi_dsi_host_ops mtk_dsi_ops = {
 	.attach = mtk_dsi_host_attach,
-	.detach = mtk_dsi_host_detach,
 	.transfer = mtk_dsi_host_transfer,
 };
 
@@ -1185,6 +1031,7 @@ static int mtk_dsi_probe(struct platform_device *pdev)
 {
 	struct mtk_dsi *dsi;
 	struct device *dev = &pdev->dev;
+	struct drm_panel *panel;
 	struct resource *regs;
 	int irq_num;
 	int comp_id;
@@ -1203,10 +1050,18 @@ static int mtk_dsi_probe(struct platform_device *pdev)
 	}
 
 	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
-					  &dsi->panel, &dsi->next_bridge);
+					  &panel, &dsi->next_bridge);
 	if (ret)
 		goto err_unregister_host;
 
+	if (panel) {
+		dsi->next_bridge = devm_drm_panel_bridge_add(dev, panel);
+		if (IS_ERR(dsi->next_bridge)) {
+			ret = PTR_ERR(dsi->next_bridge);
+			goto err_unregister_host;
+		}
+	}
+
 	dsi->driver_data = of_device_get_match_data(dev);
 
 	dsi->engine_clk = devm_clk_get(dev, "engine");
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [RESEND PATCH v4 7/7] drm/mediatek: mtk_dsi: Create connector for bridges
  2020-06-15 20:31 [RESEND PATCH v4 0/7] Convert mtk-dsi to drm_bridge API and get EDID for ps8640 bridge Enric Balletbo i Serra
                   ` (5 preceding siblings ...)
  2020-06-15 20:31 ` [RESEND PATCH v4 6/7] drm/mediatek: mtk_dsi: Use the drm_panel_bridge API Enric Balletbo i Serra
@ 2020-06-15 20:31 ` Enric Balletbo i Serra
  2020-07-05  0:15   ` Chun-Kuang Hu
  2020-06-20 21:33 ` [RESEND PATCH v4 0/7] Convert mtk-dsi to drm_bridge API and get EDID for ps8640 bridge Sam Ravnborg
  7 siblings, 1 reply; 18+ messages in thread
From: Enric Balletbo i Serra @ 2020-06-15 20:31 UTC (permalink / raw)
  To: linux-kernel, Collabora Kernel ML
  Cc: matthias.bgg, drinkcat, hsinyi, laurent.pinchart, Sam Ravnborg,
	Chun-Kuang Hu, Daniel Vetter, David Airlie, Philipp Zabel,
	dri-devel, linux-arm-kernel, linux-mediatek

Use the drm_bridge_connector helper to create a connector for pipelines
that use drm_bridge. This allows splitting connector operations across
multiple bridges when necessary, instead of having the last bridge in
the chain creating the connector and handling all connector operations
internally.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
---

Changes in v4: None
Changes in v3:
- Move the bridge.type line to the patch that adds drm_bridge support. (Laurent Pinchart)

Changes in v2: None

 drivers/gpu/drm/mediatek/mtk_dsi.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index 4f3bd095c1eee..471fcafdf3488 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -17,6 +17,7 @@
 
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_bridge.h>
+#include <drm/drm_bridge_connector.h>
 #include <drm/drm_mipi_dsi.h>
 #include <drm/drm_of.h>
 #include <drm/drm_panel.h>
@@ -183,6 +184,7 @@ struct mtk_dsi {
 	struct drm_encoder encoder;
 	struct drm_bridge bridge;
 	struct drm_bridge *next_bridge;
+	struct drm_connector *connector;
 	struct phy *phy;
 
 	void __iomem *regs;
@@ -977,10 +979,19 @@ static int mtk_dsi_encoder_init(struct drm_device *drm, struct mtk_dsi *dsi)
 	 */
 	dsi->encoder.possible_crtcs = 1;
 
-	ret = drm_bridge_attach(&dsi->encoder, &dsi->bridge, NULL, 0);
+	ret = drm_bridge_attach(&dsi->encoder, &dsi->bridge, NULL,
+				DRM_BRIDGE_ATTACH_NO_CONNECTOR);
 	if (ret)
 		goto err_cleanup_encoder;
 
+	dsi->connector = drm_bridge_connector_init(drm, &dsi->encoder);
+	if (IS_ERR(dsi->connector)) {
+		DRM_ERROR("Unable to create bridge connector\n");
+		ret = PTR_ERR(dsi->connector);
+		goto err_cleanup_encoder;
+	}
+	drm_connector_attach_encoder(dsi->connector, &dsi->encoder);
+
 	return 0;
 
 err_cleanup_encoder:
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 18+ messages in thread

* Re: [RESEND PATCH v4 0/7] Convert mtk-dsi to drm_bridge API and get EDID for ps8640 bridge
  2020-06-15 20:31 [RESEND PATCH v4 0/7] Convert mtk-dsi to drm_bridge API and get EDID for ps8640 bridge Enric Balletbo i Serra
                   ` (6 preceding siblings ...)
  2020-06-15 20:31 ` [RESEND PATCH v4 7/7] drm/mediatek: mtk_dsi: Create connector for bridges Enric Balletbo i Serra
@ 2020-06-20 21:33 ` Sam Ravnborg
  2020-06-30 14:33   ` Enric Balletbo i Serra
  7 siblings, 1 reply; 18+ messages in thread
From: Sam Ravnborg @ 2020-06-20 21:33 UTC (permalink / raw)
  To: Enric Balletbo i Serra
  Cc: linux-kernel, Collabora Kernel ML, Chun-Kuang Hu, Jernej Skrabec,
	drinkcat, Jonas Karlman, David Airlie, Thomas Zimmermann,
	dri-devel, Neil Armstrong, Andrzej Hajda, linux-mediatek,
	Laurent Pinchart, hsinyi, matthias.bgg, linux-arm-kernel

Hi Enric

On Mon, Jun 15, 2020 at 10:31:01PM +0200, Enric Balletbo i Serra wrote:
> (This resend is to fix some trivial conflicts due the merge window)
> 
> The PS8640 dsi-to-eDP bridge driver is using the panel bridge API,
> however, not all the components in the chain have been ported to the
> drm_bridge API. Actually, when a panel is attached the default panel's mode
> is used, but in some cases we can't get display up if mode getting from
> eDP control EDID is not chosen.
> 
> This series address that problem, first implements the .get_edid()
> callback in the PS8640 driver (which is not used until the conversion is
> done) and then, converts the Mediatek DSI driver to use the drm_bridge
> API.
> 
> As far as I know, we're the only users of the mediatek dsi driver in
> mainline, so should be safe to switch to the new chain of drm_bridge API
> unconditionally.
> 
> The patches has been tested on a Acer Chromebook R13 (Elm) running a
> Chrome OS userspace and checking that the valid EDID mode reported by
> the bridge is selected.
> 
> Changes in v4:
> - Remove double call to drm_encoder_init(). (Chun-Kuang Hu)
> - Cleanup the encoder in mtk_dsi_unbind(). (Chun-Kuang Hu)
> 
> Changes in v3:
> - Replace s/bridge/next bridge/ for comment. (Laurent Pinchart)
> - Add the bridge.type. (Laurent Pinchart)
> - Use next_bridge field to store the panel bridge. (Laurent Pinchart)
> - Add the bridge.type field. (Laurent Pinchart)
> - This patch requires https://lkml.org/lkml/2020/4/16/2080 to work
>   properly.
> - Move the bridge.type line to the patch that adds drm_bridge support. (Laurent Pinchart)
> 
> Changes in v2:
> - Do not set connector_type for panel here. (Sam Ravnborg)
> 
> Enric Balletbo i Serra (7):
>   drm/bridge: ps8640: Get the EDID from eDP control
>   drm/bridge_connector: Set default status connected for eDP connectors
>   drm/mediatek: mtk_dsi: Rename bridge to next_bridge
>   drm/mediatek: mtk_dsi: Convert to bridge driver
>   drm/mediatek: mtk_dsi: Use simple encoder
>   drm/mediatek: mtk_dsi: Use the drm_panel_bridge API
>   drm/mediatek: mtk_dsi: Create connector for bridges

Patch seems ready to apply. Will they be applied to a mediatek tree
or to drm-misc-next?
Or shall we take the first two patches via drm-misc-next, and the
remaning via a mediatek tree? (I hope not)

	Sam


> 
>  drivers/gpu/drm/bridge/parade-ps8640.c |  12 ++
>  drivers/gpu/drm/drm_bridge_connector.c |   1 +
>  drivers/gpu/drm/mediatek/mtk_dsi.c     | 269 ++++++++-----------------
>  3 files changed, 97 insertions(+), 185 deletions(-)
> 
> -- 
> 2.27.0
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [RESEND PATCH v4 0/7] Convert mtk-dsi to drm_bridge API and get EDID for ps8640 bridge
  2020-06-20 21:33 ` [RESEND PATCH v4 0/7] Convert mtk-dsi to drm_bridge API and get EDID for ps8640 bridge Sam Ravnborg
@ 2020-06-30 14:33   ` Enric Balletbo i Serra
  2020-06-30 16:26     ` Chun-Kuang Hu
  0 siblings, 1 reply; 18+ messages in thread
From: Enric Balletbo i Serra @ 2020-06-30 14:33 UTC (permalink / raw)
  To: Sam Ravnborg
  Cc: linux-kernel, Collabora Kernel ML, Chun-Kuang Hu, Jernej Skrabec,
	drinkcat, Jonas Karlman, David Airlie, Thomas Zimmermann,
	dri-devel, Neil Armstrong, Andrzej Hajda, linux-mediatek,
	Laurent Pinchart, hsinyi, matthias.bgg, linux-arm-kernel

Hi Sam, Chun-Kuan,

On 20/6/20 23:33, Sam Ravnborg wrote:
> Hi Enric
> 
> On Mon, Jun 15, 2020 at 10:31:01PM +0200, Enric Balletbo i Serra wrote:
>> (This resend is to fix some trivial conflicts due the merge window)
>>
>> The PS8640 dsi-to-eDP bridge driver is using the panel bridge API,
>> however, not all the components in the chain have been ported to the
>> drm_bridge API. Actually, when a panel is attached the default panel's mode
>> is used, but in some cases we can't get display up if mode getting from
>> eDP control EDID is not chosen.
>>
>> This series address that problem, first implements the .get_edid()
>> callback in the PS8640 driver (which is not used until the conversion is
>> done) and then, converts the Mediatek DSI driver to use the drm_bridge
>> API.
>>
>> As far as I know, we're the only users of the mediatek dsi driver in
>> mainline, so should be safe to switch to the new chain of drm_bridge API
>> unconditionally.
>>
>> The patches has been tested on a Acer Chromebook R13 (Elm) running a
>> Chrome OS userspace and checking that the valid EDID mode reported by
>> the bridge is selected.
>>
>> Changes in v4:
>> - Remove double call to drm_encoder_init(). (Chun-Kuang Hu)
>> - Cleanup the encoder in mtk_dsi_unbind(). (Chun-Kuang Hu)
>>
>> Changes in v3:
>> - Replace s/bridge/next bridge/ for comment. (Laurent Pinchart)
>> - Add the bridge.type. (Laurent Pinchart)
>> - Use next_bridge field to store the panel bridge. (Laurent Pinchart)
>> - Add the bridge.type field. (Laurent Pinchart)
>> - This patch requires https://lkml.org/lkml/2020/4/16/2080 to work
>>   properly.
>> - Move the bridge.type line to the patch that adds drm_bridge support. (Laurent Pinchart)
>>
>> Changes in v2:
>> - Do not set connector_type for panel here. (Sam Ravnborg)
>>
>> Enric Balletbo i Serra (7):
>>   drm/bridge: ps8640: Get the EDID from eDP control
>>   drm/bridge_connector: Set default status connected for eDP connectors
>>   drm/mediatek: mtk_dsi: Rename bridge to next_bridge
>>   drm/mediatek: mtk_dsi: Convert to bridge driver
>>   drm/mediatek: mtk_dsi: Use simple encoder
>>   drm/mediatek: mtk_dsi: Use the drm_panel_bridge API
>>   drm/mediatek: mtk_dsi: Create connector for bridges
> 
> Patch seems ready to apply. Will they be applied to a mediatek tree
> or to drm-misc-next?
> Or shall we take the first two patches via drm-misc-next, and the
> remaning via a mediatek tree? (I hope not)
> 

I think the only concern is from Chun-Kuan regarding patch 7/7 "drm/mediatek:
mtk_dsi: Create connector for bridges" whether we should support the old API or
not, but the discussion stalled.

Thanks,
 Enric



> 	Sam
> 
> 
>>
>>  drivers/gpu/drm/bridge/parade-ps8640.c |  12 ++
>>  drivers/gpu/drm/drm_bridge_connector.c |   1 +
>>  drivers/gpu/drm/mediatek/mtk_dsi.c     | 269 ++++++++-----------------
>>  3 files changed, 97 insertions(+), 185 deletions(-)
>>
>> -- 
>> 2.27.0
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
> 

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [RESEND PATCH v4 0/7] Convert mtk-dsi to drm_bridge API and get EDID for ps8640 bridge
  2020-06-30 14:33   ` Enric Balletbo i Serra
@ 2020-06-30 16:26     ` Chun-Kuang Hu
  2020-06-30 21:02       ` Enric Balletbo i Serra
  0 siblings, 1 reply; 18+ messages in thread
From: Chun-Kuang Hu @ 2020-06-30 16:26 UTC (permalink / raw)
  To: Enric Balletbo i Serra
  Cc: Sam Ravnborg, linux-kernel, Collabora Kernel ML, Chun-Kuang Hu,
	Jernej Skrabec, Nicolas Boichat, Jonas Karlman, David Airlie,
	Thomas Zimmermann, DRI Development, Neil Armstrong,
	Andrzej Hajda, moderated list:ARM/Mediatek SoC support,
	Laurent Pinchart, Hsin-Yi Wang, Matthias Brugger, Linux ARM

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年6月30日 週二 下午10:34寫道:
>
> Hi Sam, Chun-Kuan,
>
> On 20/6/20 23:33, Sam Ravnborg wrote:
> > Hi Enric
> >
> > On Mon, Jun 15, 2020 at 10:31:01PM +0200, Enric Balletbo i Serra wrote:
> >> (This resend is to fix some trivial conflicts due the merge window)
> >>
> >> The PS8640 dsi-to-eDP bridge driver is using the panel bridge API,
> >> however, not all the components in the chain have been ported to the
> >> drm_bridge API. Actually, when a panel is attached the default panel's mode
> >> is used, but in some cases we can't get display up if mode getting from
> >> eDP control EDID is not chosen.
> >>
> >> This series address that problem, first implements the .get_edid()
> >> callback in the PS8640 driver (which is not used until the conversion is
> >> done) and then, converts the Mediatek DSI driver to use the drm_bridge
> >> API.
> >>
> >> As far as I know, we're the only users of the mediatek dsi driver in
> >> mainline, so should be safe to switch to the new chain of drm_bridge API
> >> unconditionally.
> >>
> >> The patches has been tested on a Acer Chromebook R13 (Elm) running a
> >> Chrome OS userspace and checking that the valid EDID mode reported by
> >> the bridge is selected.
> >>
> >> Changes in v4:
> >> - Remove double call to drm_encoder_init(). (Chun-Kuang Hu)
> >> - Cleanup the encoder in mtk_dsi_unbind(). (Chun-Kuang Hu)
> >>
> >> Changes in v3:
> >> - Replace s/bridge/next bridge/ for comment. (Laurent Pinchart)
> >> - Add the bridge.type. (Laurent Pinchart)
> >> - Use next_bridge field to store the panel bridge. (Laurent Pinchart)
> >> - Add the bridge.type field. (Laurent Pinchart)
> >> - This patch requires https://lkml.org/lkml/2020/4/16/2080 to work
> >>   properly.
> >> - Move the bridge.type line to the patch that adds drm_bridge support. (Laurent Pinchart)
> >>
> >> Changes in v2:
> >> - Do not set connector_type for panel here. (Sam Ravnborg)
> >>
> >> Enric Balletbo i Serra (7):
> >>   drm/bridge: ps8640: Get the EDID from eDP control
> >>   drm/bridge_connector: Set default status connected for eDP connectors
> >>   drm/mediatek: mtk_dsi: Rename bridge to next_bridge
> >>   drm/mediatek: mtk_dsi: Convert to bridge driver
> >>   drm/mediatek: mtk_dsi: Use simple encoder
> >>   drm/mediatek: mtk_dsi: Use the drm_panel_bridge API
> >>   drm/mediatek: mtk_dsi: Create connector for bridges
> >
> > Patch seems ready to apply. Will they be applied to a mediatek tree
> > or to drm-misc-next?
> > Or shall we take the first two patches via drm-misc-next, and the
> > remaning via a mediatek tree? (I hope not)
> >
>
> I think the only concern is from Chun-Kuan regarding patch 7/7 "drm/mediatek:
> mtk_dsi: Create connector for bridges" whether we should support the old API or
> not, but the discussion stalled.
>

I get more clear now. In patch 7/7,

ret = drm_bridge_attach(&dsi->encoder, &dsi->bridge, NULL,
                                        DRM_BRIDGE_ATTACH_NO_CONNECTOR);

this would call into mtk_dsi_bridge_attach() first, and then call into
panel_bridge_attach() next. So panel_bridge_attach() would receive
DRM_BRIDGE_ATTACH_NO_CONNECTOR and it return immediately so it does
not call drm_panel_attach(). So where do you call drm_panel_attach()?

Regards,
Chun-Kuang.

> Thanks,
>  Enric
>
>
>
> >       Sam
> >
> >
> >>
> >>  drivers/gpu/drm/bridge/parade-ps8640.c |  12 ++
> >>  drivers/gpu/drm/drm_bridge_connector.c |   1 +
> >>  drivers/gpu/drm/mediatek/mtk_dsi.c     | 269 ++++++++-----------------
> >>  3 files changed, 97 insertions(+), 185 deletions(-)
> >>
> >> --
> >> 2.27.0
> >>
> >> _______________________________________________
> >> dri-devel mailing list
> >> dri-devel@lists.freedesktop.org
> >> https://lists.freedesktop.org/mailman/listinfo/dri-devel
> >

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [RESEND PATCH v4 0/7] Convert mtk-dsi to drm_bridge API and get EDID for ps8640 bridge
  2020-06-30 16:26     ` Chun-Kuang Hu
@ 2020-06-30 21:02       ` Enric Balletbo i Serra
  2020-06-30 23:02         ` Chun-Kuang Hu
  0 siblings, 1 reply; 18+ messages in thread
From: Enric Balletbo i Serra @ 2020-06-30 21:02 UTC (permalink / raw)
  To: Chun-Kuang Hu
  Cc: Sam Ravnborg, linux-kernel, Collabora Kernel ML, Jernej Skrabec,
	Nicolas Boichat, Jonas Karlman, David Airlie, Thomas Zimmermann,
	DRI Development, Neil Armstrong, Andrzej Hajda,
	moderated list:ARM/Mediatek SoC support, Laurent Pinchart,
	Hsin-Yi Wang, Matthias Brugger, Linux ARM

Hi Chun-Kuang,

On 30/6/20 18:26, Chun-Kuang Hu wrote:
> Hi, Enric:
> 
> Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年6月30日 週二 下午10:34寫道:
>>
>> Hi Sam, Chun-Kuan,
>>
>> On 20/6/20 23:33, Sam Ravnborg wrote:
>>> Hi Enric
>>>
>>> On Mon, Jun 15, 2020 at 10:31:01PM +0200, Enric Balletbo i Serra wrote:
>>>> (This resend is to fix some trivial conflicts due the merge window)
>>>>
>>>> The PS8640 dsi-to-eDP bridge driver is using the panel bridge API,
>>>> however, not all the components in the chain have been ported to the
>>>> drm_bridge API. Actually, when a panel is attached the default panel's mode
>>>> is used, but in some cases we can't get display up if mode getting from
>>>> eDP control EDID is not chosen.
>>>>
>>>> This series address that problem, first implements the .get_edid()
>>>> callback in the PS8640 driver (which is not used until the conversion is
>>>> done) and then, converts the Mediatek DSI driver to use the drm_bridge
>>>> API.
>>>>
>>>> As far as I know, we're the only users of the mediatek dsi driver in
>>>> mainline, so should be safe to switch to the new chain of drm_bridge API
>>>> unconditionally.
>>>>
>>>> The patches has been tested on a Acer Chromebook R13 (Elm) running a
>>>> Chrome OS userspace and checking that the valid EDID mode reported by
>>>> the bridge is selected.
>>>>
>>>> Changes in v4:
>>>> - Remove double call to drm_encoder_init(). (Chun-Kuang Hu)
>>>> - Cleanup the encoder in mtk_dsi_unbind(). (Chun-Kuang Hu)
>>>>
>>>> Changes in v3:
>>>> - Replace s/bridge/next bridge/ for comment. (Laurent Pinchart)
>>>> - Add the bridge.type. (Laurent Pinchart)
>>>> - Use next_bridge field to store the panel bridge. (Laurent Pinchart)
>>>> - Add the bridge.type field. (Laurent Pinchart)
>>>> - This patch requires https://lkml.org/lkml/2020/4/16/2080 to work
>>>>   properly.
>>>> - Move the bridge.type line to the patch that adds drm_bridge support. (Laurent Pinchart)
>>>>
>>>> Changes in v2:
>>>> - Do not set connector_type for panel here. (Sam Ravnborg)
>>>>
>>>> Enric Balletbo i Serra (7):
>>>>   drm/bridge: ps8640: Get the EDID from eDP control
>>>>   drm/bridge_connector: Set default status connected for eDP connectors
>>>>   drm/mediatek: mtk_dsi: Rename bridge to next_bridge
>>>>   drm/mediatek: mtk_dsi: Convert to bridge driver
>>>>   drm/mediatek: mtk_dsi: Use simple encoder
>>>>   drm/mediatek: mtk_dsi: Use the drm_panel_bridge API
>>>>   drm/mediatek: mtk_dsi: Create connector for bridges
>>>
>>> Patch seems ready to apply. Will they be applied to a mediatek tree
>>> or to drm-misc-next?
>>> Or shall we take the first two patches via drm-misc-next, and the
>>> remaning via a mediatek tree? (I hope not)
>>>
>>
>> I think the only concern is from Chun-Kuan regarding patch 7/7 "drm/mediatek:
>> mtk_dsi: Create connector for bridges" whether we should support the old API or
>> not, but the discussion stalled.
>>
> 
> I get more clear now. In patch 7/7,
> 
> ret = drm_bridge_attach(&dsi->encoder, &dsi->bridge, NULL,
>                                         DRM_BRIDGE_ATTACH_NO_CONNECTOR);
> 
> this would call into mtk_dsi_bridge_attach() first, and then call into
> panel_bridge_attach() next. So panel_bridge_attach() would receive
> DRM_BRIDGE_ATTACH_NO_CONNECTOR and it return immediately so it does
> not call drm_panel_attach(). So where do you call drm_panel_attach()?
> 

Why I need to call drm_panel_attach?

I believe drm_panel_attach() was to attach a panel to a connector, but we don't
need to do this with the new API as the connector is already created and
attached to the "dummy" encoder.

Makes that sense to you? What do you think will not work if I don't call
drm_panel_attach?

[1]
https://elixir.bootlin.com/linux/v5.8-rc3/source/drivers/gpu/drm/drm_panel.c#L101

Regards,
 Enric


> Regards,
> Chun-Kuang.
> 
>> Thanks,
>>  Enric
>>
>>
>>
>>>       Sam
>>>
>>>
>>>>
>>>>  drivers/gpu/drm/bridge/parade-ps8640.c |  12 ++
>>>>  drivers/gpu/drm/drm_bridge_connector.c |   1 +
>>>>  drivers/gpu/drm/mediatek/mtk_dsi.c     | 269 ++++++++-----------------
>>>>  3 files changed, 97 insertions(+), 185 deletions(-)
>>>>
>>>> --
>>>> 2.27.0
>>>>
>>>> _______________________________________________
>>>> dri-devel mailing list
>>>> dri-devel@lists.freedesktop.org
>>>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>>>
> 

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [RESEND PATCH v4 0/7] Convert mtk-dsi to drm_bridge API and get EDID for ps8640 bridge
  2020-06-30 21:02       ` Enric Balletbo i Serra
@ 2020-06-30 23:02         ` Chun-Kuang Hu
  0 siblings, 0 replies; 18+ messages in thread
From: Chun-Kuang Hu @ 2020-06-30 23:02 UTC (permalink / raw)
  To: Enric Balletbo i Serra
  Cc: Chun-Kuang Hu, Sam Ravnborg, linux-kernel, Collabora Kernel ML,
	Jernej Skrabec, Nicolas Boichat, Jonas Karlman, David Airlie,
	Thomas Zimmermann, DRI Development, Neil Armstrong,
	Andrzej Hajda, moderated list:ARM/Mediatek SoC support,
	Laurent Pinchart, Hsin-Yi Wang, Matthias Brugger, Linux ARM

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年7月1日 週三 上午5:02寫道:
>
> Hi Chun-Kuang,
>
> On 30/6/20 18:26, Chun-Kuang Hu wrote:
> > Hi, Enric:
> >
> > Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年6月30日 週二 下午10:34寫道:
> >>
> >> Hi Sam, Chun-Kuan,
> >>
> >> On 20/6/20 23:33, Sam Ravnborg wrote:
> >>> Hi Enric
> >>>
> >>> On Mon, Jun 15, 2020 at 10:31:01PM +0200, Enric Balletbo i Serra wrote:
> >>>> (This resend is to fix some trivial conflicts due the merge window)
> >>>>
> >>>> The PS8640 dsi-to-eDP bridge driver is using the panel bridge API,
> >>>> however, not all the components in the chain have been ported to the
> >>>> drm_bridge API. Actually, when a panel is attached the default panel's mode
> >>>> is used, but in some cases we can't get display up if mode getting from
> >>>> eDP control EDID is not chosen.
> >>>>
> >>>> This series address that problem, first implements the .get_edid()
> >>>> callback in the PS8640 driver (which is not used until the conversion is
> >>>> done) and then, converts the Mediatek DSI driver to use the drm_bridge
> >>>> API.
> >>>>
> >>>> As far as I know, we're the only users of the mediatek dsi driver in
> >>>> mainline, so should be safe to switch to the new chain of drm_bridge API
> >>>> unconditionally.
> >>>>
> >>>> The patches has been tested on a Acer Chromebook R13 (Elm) running a
> >>>> Chrome OS userspace and checking that the valid EDID mode reported by
> >>>> the bridge is selected.
> >>>>
> >>>> Changes in v4:
> >>>> - Remove double call to drm_encoder_init(). (Chun-Kuang Hu)
> >>>> - Cleanup the encoder in mtk_dsi_unbind(). (Chun-Kuang Hu)
> >>>>
> >>>> Changes in v3:
> >>>> - Replace s/bridge/next bridge/ for comment. (Laurent Pinchart)
> >>>> - Add the bridge.type. (Laurent Pinchart)
> >>>> - Use next_bridge field to store the panel bridge. (Laurent Pinchart)
> >>>> - Add the bridge.type field. (Laurent Pinchart)
> >>>> - This patch requires https://lkml.org/lkml/2020/4/16/2080 to work
> >>>>   properly.
> >>>> - Move the bridge.type line to the patch that adds drm_bridge support. (Laurent Pinchart)
> >>>>
> >>>> Changes in v2:
> >>>> - Do not set connector_type for panel here. (Sam Ravnborg)
> >>>>
> >>>> Enric Balletbo i Serra (7):
> >>>>   drm/bridge: ps8640: Get the EDID from eDP control
> >>>>   drm/bridge_connector: Set default status connected for eDP connectors
> >>>>   drm/mediatek: mtk_dsi: Rename bridge to next_bridge
> >>>>   drm/mediatek: mtk_dsi: Convert to bridge driver
> >>>>   drm/mediatek: mtk_dsi: Use simple encoder
> >>>>   drm/mediatek: mtk_dsi: Use the drm_panel_bridge API
> >>>>   drm/mediatek: mtk_dsi: Create connector for bridges
> >>>
> >>> Patch seems ready to apply. Will they be applied to a mediatek tree
> >>> or to drm-misc-next?
> >>> Or shall we take the first two patches via drm-misc-next, and the
> >>> remaning via a mediatek tree? (I hope not)
> >>>
> >>
> >> I think the only concern is from Chun-Kuan regarding patch 7/7 "drm/mediatek:
> >> mtk_dsi: Create connector for bridges" whether we should support the old API or
> >> not, but the discussion stalled.
> >>
> >
> > I get more clear now. In patch 7/7,
> >
> > ret = drm_bridge_attach(&dsi->encoder, &dsi->bridge, NULL,
> >                                         DRM_BRIDGE_ATTACH_NO_CONNECTOR);
> >
> > this would call into mtk_dsi_bridge_attach() first, and then call into
> > panel_bridge_attach() next. So panel_bridge_attach() would receive
> > DRM_BRIDGE_ATTACH_NO_CONNECTOR and it return immediately so it does
> > not call drm_panel_attach(). So where do you call drm_panel_attach()?
> >
>
> Why I need to call drm_panel_attach?
>
> I believe drm_panel_attach() was to attach a panel to a connector, but we don't
> need to do this with the new API as the connector is already created and
> attached to the "dummy" encoder.
>
> Makes that sense to you? What do you think will not work if I don't call
> drm_panel_attach?
>
> [1]
> https://elixir.bootlin.com/linux/v5.8-rc3/source/drivers/gpu/drm/drm_panel.c#L101
>

Sorry, I do not notice this. So for patch 7/7,

Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

and I would take this series into my tree later, thanks.

Regards,
Chun-Kuang.

> Regards,
>  Enric
>
>
> > Regards,
> > Chun-Kuang.
> >
> >> Thanks,
> >>  Enric
> >>
> >>
> >>
> >>>       Sam
> >>>
> >>>
> >>>>
> >>>>  drivers/gpu/drm/bridge/parade-ps8640.c |  12 ++
> >>>>  drivers/gpu/drm/drm_bridge_connector.c |   1 +
> >>>>  drivers/gpu/drm/mediatek/mtk_dsi.c     | 269 ++++++++-----------------
> >>>>  3 files changed, 97 insertions(+), 185 deletions(-)
> >>>>
> >>>> --
> >>>> 2.27.0
> >>>>
> >>>> _______________________________________________
> >>>> dri-devel mailing list
> >>>> dri-devel@lists.freedesktop.org
> >>>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
> >>>
> >

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [RESEND PATCH v4 3/7] drm/mediatek: mtk_dsi: Rename bridge to next_bridge
  2020-06-15 20:31 ` [RESEND PATCH v4 3/7] drm/mediatek: mtk_dsi: Rename bridge to next_bridge Enric Balletbo i Serra
@ 2020-07-04 23:20   ` Chun-Kuang Hu
  0 siblings, 0 replies; 18+ messages in thread
From: Chun-Kuang Hu @ 2020-07-04 23:20 UTC (permalink / raw)
  To: Enric Balletbo i Serra
  Cc: linux-kernel, Collabora Kernel ML, Matthias Brugger,
	Nicolas Boichat, Hsin-Yi Wang, Laurent Pinchart, Sam Ravnborg,
	Chun-Kuang Hu, Daniel Vetter, David Airlie, Philipp Zabel,
	DRI Development, Linux ARM,
	moderated list:ARM/Mediatek SoC support

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年6月16日 週二 上午4:31寫道:
>
> This is really a cosmetic change just to make a bit more readable the
> code after convert the driver to drm_bridge. The bridge variable name
> will be used by the encoder drm_bridge, and the chained bridge will be
> named next_bridge.
>

Applied to mediatek-drm-next [1], thanks.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/log/?h=mediatek-drm-next

Regards,
Chun-Kuang.

> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Acked-by: Sam Ravnborg <sam@ravnborg.org>
> Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> ---
>
> Changes in v4: None
> Changes in v3:
> - Replace s/bridge/next bridge/ for comment. (Laurent Pinchart)
>
> Changes in v2: None
>
>  drivers/gpu/drm/mediatek/mtk_dsi.c | 11 ++++++-----
>  1 file changed, 6 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index 270bf22c98feb..208f49bf14a01 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -183,7 +183,7 @@ struct mtk_dsi {
>         struct drm_encoder encoder;
>         struct drm_connector conn;
>         struct drm_panel *panel;
> -       struct drm_bridge *bridge;
> +       struct drm_bridge *next_bridge;
>         struct phy *phy;
>
>         void __iomem *regs;
> @@ -894,9 +894,10 @@ static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi)
>          */
>         dsi->encoder.possible_crtcs = 1;
>
> -       /* If there's a bridge, attach to it and let it create the connector */
> -       if (dsi->bridge) {
> -               ret = drm_bridge_attach(&dsi->encoder, dsi->bridge, NULL, 0);
> +       /* If there's a next bridge, attach to it and let it create the connector */
> +       if (dsi->next_bridge) {
> +               ret = drm_bridge_attach(&dsi->encoder, dsi->next_bridge, NULL,
> +                                       0);
>                 if (ret) {
>                         DRM_ERROR("Failed to attach bridge to drm\n");
>                         goto err_encoder_cleanup;
> @@ -1177,7 +1178,7 @@ static int mtk_dsi_probe(struct platform_device *pdev)
>         }
>
>         ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
> -                                         &dsi->panel, &dsi->bridge);
> +                                         &dsi->panel, &dsi->next_bridge);
>         if (ret)
>                 goto err_unregister_host;
>
> --
> 2.27.0
>

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [RESEND PATCH v4 4/7] drm/mediatek: mtk_dsi: Convert to bridge driver
  2020-06-15 20:31 ` [RESEND PATCH v4 4/7] drm/mediatek: mtk_dsi: Convert to bridge driver Enric Balletbo i Serra
@ 2020-07-04 23:34   ` Chun-Kuang Hu
  0 siblings, 0 replies; 18+ messages in thread
From: Chun-Kuang Hu @ 2020-07-04 23:34 UTC (permalink / raw)
  To: Enric Balletbo i Serra
  Cc: linux-kernel, Collabora Kernel ML, Matthias Brugger,
	Nicolas Boichat, Hsin-Yi Wang, Laurent Pinchart, Sam Ravnborg,
	Chun-Kuang Hu, Daniel Vetter, David Airlie, Philipp Zabel,
	DRI Development, Linux ARM,
	moderated list:ARM/Mediatek SoC support

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年6月16日 週二 上午4:31寫道:
>
> Convert mtk_dsi to a bridge driver with built-in encoder support for
> compatibility with existing component drivers.

Applied to mediatek-drm-next [1], thanks.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/log/?h=mediatek-drm-next

Regards,
Chun-Kuang.

>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> Acked-by: Sam Ravnborg <sam@ravnborg.org>
> Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> ---
>
> Changes in v4:
> - Remove double call to drm_encoder_init(). (Chun-Kuang Hu)
> - Cleanup the encoder in mtk_dsi_unbind(). (Chun-Kuang Hu)
>
> Changes in v3:
> - Add the bridge.type. (Laurent Pinchart)
>
> Changes in v2: None
>
>  drivers/gpu/drm/mediatek/mtk_dsi.c | 117 +++++++++++++++++++----------
>  1 file changed, 79 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index 208f49bf14a01..759a5b37fb4d2 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -181,6 +181,7 @@ struct mtk_dsi {
>         struct device *dev;
>         struct mipi_dsi_host host;
>         struct drm_encoder encoder;
> +       struct drm_bridge bridge;
>         struct drm_connector conn;
>         struct drm_panel *panel;
>         struct drm_bridge *next_bridge;
> @@ -206,9 +207,9 @@ struct mtk_dsi {
>         const struct mtk_dsi_driver_data *driver_data;
>  };
>
> -static inline struct mtk_dsi *encoder_to_dsi(struct drm_encoder *e)
> +static inline struct mtk_dsi *bridge_to_dsi(struct drm_bridge *b)
>  {
> -       return container_of(e, struct mtk_dsi, encoder);
> +       return container_of(b, struct mtk_dsi, bridge);
>  }
>
>  static inline struct mtk_dsi *connector_to_dsi(struct drm_connector *c)
> @@ -788,32 +789,52 @@ static void mtk_output_dsi_disable(struct mtk_dsi *dsi)
>         dsi->enabled = false;
>  }
>
> -static bool mtk_dsi_encoder_mode_fixup(struct drm_encoder *encoder,
> -                                      const struct drm_display_mode *mode,
> -                                      struct drm_display_mode *adjusted_mode)
> +static void mtk_dsi_encoder_destroy(struct drm_encoder *encoder)
>  {
> -       return true;
> +       drm_encoder_cleanup(encoder);
>  }
>
> -static void mtk_dsi_encoder_mode_set(struct drm_encoder *encoder,
> -                                    struct drm_display_mode *mode,
> -                                    struct drm_display_mode *adjusted)
> +static const struct drm_encoder_funcs mtk_dsi_encoder_funcs = {
> +       .destroy = mtk_dsi_encoder_destroy,
> +};
> +
> +static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi);
> +static void mtk_dsi_destroy_conn_enc(struct mtk_dsi *dsi);
> +
> +static int mtk_dsi_bridge_attach(struct drm_bridge *bridge,
> +                                enum drm_bridge_attach_flags flags)
> +{
> +       struct mtk_dsi *dsi = bridge_to_dsi(bridge);
> +
> +       return mtk_dsi_create_conn_enc(bridge->dev, dsi);
> +}
> +
> +static void mtk_dsi_bridge_detach(struct drm_bridge *bridge)
>  {
> -       struct mtk_dsi *dsi = encoder_to_dsi(encoder);
> +       struct mtk_dsi *dsi = bridge_to_dsi(bridge);
> +
> +       mtk_dsi_destroy_conn_enc(dsi);
> +}
> +
> +static void mtk_dsi_bridge_mode_set(struct drm_bridge *bridge,
> +                                   const struct drm_display_mode *mode,
> +                                   const struct drm_display_mode *adjusted)
> +{
> +       struct mtk_dsi *dsi = bridge_to_dsi(bridge);
>
>         drm_display_mode_to_videomode(adjusted, &dsi->vm);
>  }
>
> -static void mtk_dsi_encoder_disable(struct drm_encoder *encoder)
> +static void mtk_dsi_bridge_disable(struct drm_bridge *bridge)
>  {
> -       struct mtk_dsi *dsi = encoder_to_dsi(encoder);
> +       struct mtk_dsi *dsi = bridge_to_dsi(bridge);
>
>         mtk_output_dsi_disable(dsi);
>  }
>
> -static void mtk_dsi_encoder_enable(struct drm_encoder *encoder)
> +static void mtk_dsi_bridge_enable(struct drm_bridge *bridge)
>  {
> -       struct mtk_dsi *dsi = encoder_to_dsi(encoder);
> +       struct mtk_dsi *dsi = bridge_to_dsi(bridge);
>
>         mtk_output_dsi_enable(dsi);
>  }
> @@ -825,11 +846,12 @@ static int mtk_dsi_connector_get_modes(struct drm_connector *connector)
>         return drm_panel_get_modes(dsi->panel, connector);
>  }
>
> -static const struct drm_encoder_helper_funcs mtk_dsi_encoder_helper_funcs = {
> -       .mode_fixup = mtk_dsi_encoder_mode_fixup,
> -       .mode_set = mtk_dsi_encoder_mode_set,
> -       .disable = mtk_dsi_encoder_disable,
> -       .enable = mtk_dsi_encoder_enable,
> +static const struct drm_bridge_funcs mtk_dsi_bridge_funcs = {
> +       .attach = mtk_dsi_bridge_attach,
> +       .detach = mtk_dsi_bridge_detach,
> +       .disable = mtk_dsi_bridge_disable,
> +       .enable = mtk_dsi_bridge_enable,
> +       .mode_set = mtk_dsi_bridge_mode_set,
>  };
>
>  static const struct drm_connector_funcs mtk_dsi_connector_funcs = {
> @@ -880,20 +902,6 @@ static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi)
>  {
>         int ret;
>
> -       ret = drm_simple_encoder_init(drm, &dsi->encoder,
> -                                     DRM_MODE_ENCODER_DSI);
> -       if (ret) {
> -               DRM_ERROR("Failed to encoder init to drm\n");
> -               return ret;
> -       }
> -       drm_encoder_helper_add(&dsi->encoder, &mtk_dsi_encoder_helper_funcs);
> -
> -       /*
> -        * Currently display data paths are statically assigned to a crtc each.
> -        * crtc 0 is OVL0 -> COLOR0 -> AAL -> OD -> RDMA0 -> UFOE -> DSI0
> -        */
> -       dsi->encoder.possible_crtcs = 1;
> -
>         /* If there's a next bridge, attach to it and let it create the connector */
>         if (dsi->next_bridge) {
>                 ret = drm_bridge_attach(&dsi->encoder, dsi->next_bridge, NULL,
> @@ -1115,6 +1123,34 @@ static const struct mipi_dsi_host_ops mtk_dsi_ops = {
>         .transfer = mtk_dsi_host_transfer,
>  };
>
> +static int mtk_dsi_encoder_init(struct drm_device *drm, struct mtk_dsi *dsi)
> +{
> +       int ret;
> +
> +       ret = drm_encoder_init(drm, &dsi->encoder, &mtk_dsi_encoder_funcs,
> +                              DRM_MODE_ENCODER_DSI, NULL);
> +       if (ret) {
> +               DRM_ERROR("Failed to encoder init to drm\n");
> +               return ret;
> +       }
> +
> +       /*
> +        * Currently display data paths are statically assigned to a crtc each.
> +        * crtc 0 is OVL0 -> COLOR0 -> AAL -> OD -> RDMA0 -> UFOE -> DSI0
> +        */
> +       dsi->encoder.possible_crtcs = 1;
> +
> +       ret = drm_bridge_attach(&dsi->encoder, &dsi->bridge, NULL, 0);
> +       if (ret)
> +               goto err_cleanup_encoder;
> +
> +       return 0;
> +
> +err_cleanup_encoder:
> +       drm_encoder_cleanup(&dsi->encoder);
> +       return ret;
> +}
> +
>  static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
>  {
>         int ret;
> @@ -1128,11 +1164,9 @@ static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
>                 return ret;
>         }
>
> -       ret = mtk_dsi_create_conn_enc(drm, dsi);
> -       if (ret) {
> -               DRM_ERROR("Encoder create failed with %d\n", ret);
> +       ret = mtk_dsi_encoder_init(drm, dsi);
> +       if (ret)
>                 goto err_unregister;
> -       }
>
>         return 0;
>
> @@ -1147,7 +1181,7 @@ static void mtk_dsi_unbind(struct device *dev, struct device *master,
>         struct drm_device *drm = data;
>         struct mtk_dsi *dsi = dev_get_drvdata(dev);
>
> -       mtk_dsi_destroy_conn_enc(dsi);
> +       drm_encoder_cleanup(&dsi->encoder);
>         mtk_ddp_comp_unregister(drm, &dsi->ddp_comp);
>  }
>
> @@ -1257,6 +1291,12 @@ static int mtk_dsi_probe(struct platform_device *pdev)
>
>         platform_set_drvdata(pdev, dsi);
>
> +       dsi->bridge.funcs = &mtk_dsi_bridge_funcs;
> +       dsi->bridge.of_node = dev->of_node;
> +       dsi->bridge.type = DRM_MODE_CONNECTOR_DSI;
> +
> +       drm_bridge_add(&dsi->bridge);
> +
>         ret = component_add(&pdev->dev, &mtk_dsi_component_ops);
>         if (ret) {
>                 dev_err(&pdev->dev, "failed to add component: %d\n", ret);
> @@ -1275,6 +1315,7 @@ static int mtk_dsi_remove(struct platform_device *pdev)
>         struct mtk_dsi *dsi = platform_get_drvdata(pdev);
>
>         mtk_output_dsi_disable(dsi);
> +       drm_bridge_remove(&dsi->bridge);
>         component_del(&pdev->dev, &mtk_dsi_component_ops);
>         mipi_dsi_host_unregister(&dsi->host);
>
> --
> 2.27.0
>

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [RESEND PATCH v4 5/7] drm/mediatek: mtk_dsi: Use simple encoder
  2020-06-15 20:31 ` [RESEND PATCH v4 5/7] drm/mediatek: mtk_dsi: Use simple encoder Enric Balletbo i Serra
@ 2020-07-04 23:42   ` Chun-Kuang Hu
  0 siblings, 0 replies; 18+ messages in thread
From: Chun-Kuang Hu @ 2020-07-04 23:42 UTC (permalink / raw)
  To: Enric Balletbo i Serra
  Cc: linux-kernel, Collabora Kernel ML, Matthias Brugger,
	Nicolas Boichat, Hsin-Yi Wang, Laurent Pinchart, Sam Ravnborg,
	Chun-Kuang Hu, Daniel Vetter, David Airlie, Philipp Zabel,
	DRI Development, Linux ARM,
	moderated list:ARM/Mediatek SoC support

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年6月16日 週二 上午4:31寫道:
>
> The mtk_dsi driver uses an empty implementation for its encoder. Replace
> the code with the generic simple encoder.

Applied to mediatek-drm-next [1], thanks.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/log/?h=mediatek-drm-next

Regards,
Chun-Kuang.

>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Acked-by: Sam Ravnborg <sam@ravnborg.org>
> Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> ---
>
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
>
>  drivers/gpu/drm/mediatek/mtk_dsi.c | 13 ++-----------
>  1 file changed, 2 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index 759a5b37fb4d2..e02d16a086ac0 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -789,15 +789,6 @@ static void mtk_output_dsi_disable(struct mtk_dsi *dsi)
>         dsi->enabled = false;
>  }
>
> -static void mtk_dsi_encoder_destroy(struct drm_encoder *encoder)
> -{
> -       drm_encoder_cleanup(encoder);
> -}
> -
> -static const struct drm_encoder_funcs mtk_dsi_encoder_funcs = {
> -       .destroy = mtk_dsi_encoder_destroy,
> -};
> -
>  static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi);
>  static void mtk_dsi_destroy_conn_enc(struct mtk_dsi *dsi);
>
> @@ -1127,8 +1118,8 @@ static int mtk_dsi_encoder_init(struct drm_device *drm, struct mtk_dsi *dsi)
>  {
>         int ret;
>
> -       ret = drm_encoder_init(drm, &dsi->encoder, &mtk_dsi_encoder_funcs,
> -                              DRM_MODE_ENCODER_DSI, NULL);
> +       ret = drm_simple_encoder_init(drm, &dsi->encoder,
> +                                     DRM_MODE_ENCODER_DSI);
>         if (ret) {
>                 DRM_ERROR("Failed to encoder init to drm\n");
>                 return ret;
> --
> 2.27.0
>

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [RESEND PATCH v4 6/7] drm/mediatek: mtk_dsi: Use the drm_panel_bridge API
  2020-06-15 20:31 ` [RESEND PATCH v4 6/7] drm/mediatek: mtk_dsi: Use the drm_panel_bridge API Enric Balletbo i Serra
@ 2020-07-04 23:57   ` Chun-Kuang Hu
  0 siblings, 0 replies; 18+ messages in thread
From: Chun-Kuang Hu @ 2020-07-04 23:57 UTC (permalink / raw)
  To: Enric Balletbo i Serra
  Cc: linux-kernel, Collabora Kernel ML, Matthias Brugger,
	Nicolas Boichat, Hsin-Yi Wang, Laurent Pinchart, Sam Ravnborg,
	Chun-Kuang Hu, Daniel Vetter, David Airlie, Philipp Zabel,
	DRI Development, Linux ARM,
	moderated list:ARM/Mediatek SoC support

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年6月16日 週二 上午4:31寫道:
>
> Replace the manual panel handling code by a drm_panel_bridge. This
> simplifies the driver and allows all components in the display pipeline
> to be treated as bridges, paving the way to generic connector handling.
>

Applied to mediatek-drm-next [1], thanks.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/log/?h=mediatek-drm-next

Regards,
Chun-Kuang.

> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Acked-by: Sam Ravnborg <sam@ravnborg.org>
> Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> ---
>
> Changes in v4: None
> Changes in v3:
> - Use next_bridge field to store the panel bridge. (Laurent Pinchart)
> - Add the bridge.type field. (Laurent Pinchart)
> - This patch requires https://lkml.org/lkml/2020/4/16/2080 to work
>   properly.
>
> Changes in v2:
> - Do not set connector_type for panel here. (Sam Ravnborg)
>
>  drivers/gpu/drm/mediatek/mtk_dsi.c | 173 +++--------------------------
>  1 file changed, 14 insertions(+), 159 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index e02d16a086ac0..4f3bd095c1eee 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -182,8 +182,6 @@ struct mtk_dsi {
>         struct mipi_dsi_host host;
>         struct drm_encoder encoder;
>         struct drm_bridge bridge;
> -       struct drm_connector conn;
> -       struct drm_panel *panel;
>         struct drm_bridge *next_bridge;
>         struct phy *phy;
>
> @@ -212,11 +210,6 @@ static inline struct mtk_dsi *bridge_to_dsi(struct drm_bridge *b)
>         return container_of(b, struct mtk_dsi, bridge);
>  }
>
> -static inline struct mtk_dsi *connector_to_dsi(struct drm_connector *c)
> -{
> -       return container_of(c, struct mtk_dsi, conn);
> -}
> -
>  static inline struct mtk_dsi *host_to_dsi(struct mipi_dsi_host *h)
>  {
>         return container_of(h, struct mtk_dsi, host);
> @@ -682,16 +675,7 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi)
>         mtk_dsi_lane0_ulp_mode_leave(dsi);
>         mtk_dsi_clk_hs_mode(dsi, 0);
>
> -       if (dsi->panel) {
> -               if (drm_panel_prepare(dsi->panel)) {
> -                       DRM_ERROR("failed to prepare the panel\n");
> -                       goto err_disable_digital_clk;
> -               }
> -       }
> -
>         return 0;
> -err_disable_digital_clk:
> -       clk_disable_unprepare(dsi->digital_clk);
>  err_disable_engine_clk:
>         clk_disable_unprepare(dsi->engine_clk);
>  err_phy_power_off:
> @@ -718,15 +702,7 @@ static void mtk_dsi_poweroff(struct mtk_dsi *dsi)
>          */
>         mtk_dsi_stop(dsi);
>
> -       if (!mtk_dsi_switch_to_cmd_mode(dsi, VM_DONE_INT_FLAG, 500)) {
> -               if (dsi->panel) {
> -                       if (drm_panel_unprepare(dsi->panel)) {
> -                               DRM_ERROR("failed to unprepare the panel\n");
> -                               return;
> -                       }
> -               }
> -       }
> -
> +       mtk_dsi_switch_to_cmd_mode(dsi, VM_DONE_INT_FLAG, 500);
>         mtk_dsi_reset_engine(dsi);
>         mtk_dsi_lane0_ulp_mode_enter(dsi);
>         mtk_dsi_clk_ulp_mode_enter(dsi);
> @@ -757,19 +733,7 @@ static void mtk_output_dsi_enable(struct mtk_dsi *dsi)
>
>         mtk_dsi_start(dsi);
>
> -       if (dsi->panel) {
> -               if (drm_panel_enable(dsi->panel)) {
> -                       DRM_ERROR("failed to enable the panel\n");
> -                       goto err_dsi_power_off;
> -               }
> -       }
> -
>         dsi->enabled = true;
> -
> -       return;
> -err_dsi_power_off:
> -       mtk_dsi_stop(dsi);
> -       mtk_dsi_poweroff(dsi);
>  }
>
>  static void mtk_output_dsi_disable(struct mtk_dsi *dsi)
> @@ -777,34 +741,19 @@ static void mtk_output_dsi_disable(struct mtk_dsi *dsi)
>         if (!dsi->enabled)
>                 return;
>
> -       if (dsi->panel) {
> -               if (drm_panel_disable(dsi->panel)) {
> -                       DRM_ERROR("failed to disable the panel\n");
> -                       return;
> -               }
> -       }
> -
>         mtk_dsi_poweroff(dsi);
>
>         dsi->enabled = false;
>  }
>
> -static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi);
> -static void mtk_dsi_destroy_conn_enc(struct mtk_dsi *dsi);
> -
>  static int mtk_dsi_bridge_attach(struct drm_bridge *bridge,
>                                  enum drm_bridge_attach_flags flags)
>  {
>         struct mtk_dsi *dsi = bridge_to_dsi(bridge);
>
> -       return mtk_dsi_create_conn_enc(bridge->dev, dsi);
> -}
> -
> -static void mtk_dsi_bridge_detach(struct drm_bridge *bridge)
> -{
> -       struct mtk_dsi *dsi = bridge_to_dsi(bridge);
> -
> -       mtk_dsi_destroy_conn_enc(dsi);
> +       /* Attach the panel or bridge to the dsi bridge */
> +       return drm_bridge_attach(bridge->encoder, dsi->next_bridge,
> +                                &dsi->bridge, flags);
>  }
>
>  static void mtk_dsi_bridge_mode_set(struct drm_bridge *bridge,
> @@ -830,101 +779,13 @@ static void mtk_dsi_bridge_enable(struct drm_bridge *bridge)
>         mtk_output_dsi_enable(dsi);
>  }
>
> -static int mtk_dsi_connector_get_modes(struct drm_connector *connector)
> -{
> -       struct mtk_dsi *dsi = connector_to_dsi(connector);
> -
> -       return drm_panel_get_modes(dsi->panel, connector);
> -}
> -
>  static const struct drm_bridge_funcs mtk_dsi_bridge_funcs = {
>         .attach = mtk_dsi_bridge_attach,
> -       .detach = mtk_dsi_bridge_detach,
>         .disable = mtk_dsi_bridge_disable,
>         .enable = mtk_dsi_bridge_enable,
>         .mode_set = mtk_dsi_bridge_mode_set,
>  };
>
> -static const struct drm_connector_funcs mtk_dsi_connector_funcs = {
> -       .fill_modes = drm_helper_probe_single_connector_modes,
> -       .destroy = drm_connector_cleanup,
> -       .reset = drm_atomic_helper_connector_reset,
> -       .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> -       .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> -};
> -
> -static const struct drm_connector_helper_funcs
> -       mtk_dsi_connector_helper_funcs = {
> -       .get_modes = mtk_dsi_connector_get_modes,
> -};
> -
> -static int mtk_dsi_create_connector(struct drm_device *drm, struct mtk_dsi *dsi)
> -{
> -       int ret;
> -
> -       ret = drm_connector_init(drm, &dsi->conn, &mtk_dsi_connector_funcs,
> -                                DRM_MODE_CONNECTOR_DSI);
> -       if (ret) {
> -               DRM_ERROR("Failed to connector init to drm\n");
> -               return ret;
> -       }
> -
> -       drm_connector_helper_add(&dsi->conn, &mtk_dsi_connector_helper_funcs);
> -
> -       dsi->conn.dpms = DRM_MODE_DPMS_OFF;
> -       drm_connector_attach_encoder(&dsi->conn, &dsi->encoder);
> -
> -       if (dsi->panel) {
> -               ret = drm_panel_attach(dsi->panel, &dsi->conn);
> -               if (ret) {
> -                       DRM_ERROR("Failed to attach panel to drm\n");
> -                       goto err_connector_cleanup;
> -               }
> -       }
> -
> -       return 0;
> -
> -err_connector_cleanup:
> -       drm_connector_cleanup(&dsi->conn);
> -       return ret;
> -}
> -
> -static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi)
> -{
> -       int ret;
> -
> -       /* If there's a next bridge, attach to it and let it create the connector */
> -       if (dsi->next_bridge) {
> -               ret = drm_bridge_attach(&dsi->encoder, dsi->next_bridge, NULL,
> -                                       0);
> -               if (ret) {
> -                       DRM_ERROR("Failed to attach bridge to drm\n");
> -                       goto err_encoder_cleanup;
> -               }
> -       } else {
> -               /* Otherwise create our own connector and attach to a panel */
> -               ret = mtk_dsi_create_connector(drm, dsi);
> -               if (ret)
> -                       goto err_encoder_cleanup;
> -       }
> -
> -       return 0;
> -
> -err_encoder_cleanup:
> -       drm_encoder_cleanup(&dsi->encoder);
> -       return ret;
> -}
> -
> -static void mtk_dsi_destroy_conn_enc(struct mtk_dsi *dsi)
> -{
> -       drm_encoder_cleanup(&dsi->encoder);
> -       /* Skip connector cleanup if creation was delegated to the bridge */
> -       if (dsi->conn.dev)
> -               drm_connector_cleanup(&dsi->conn);
> -       if (dsi->panel)
> -               drm_panel_detach(dsi->panel);
> -}
> -
>  static void mtk_dsi_ddp_start(struct mtk_ddp_comp *comp)
>  {
>         struct mtk_dsi *dsi = container_of(comp, struct mtk_dsi, ddp_comp);
> @@ -953,20 +814,6 @@ static int mtk_dsi_host_attach(struct mipi_dsi_host *host,
>         dsi->format = device->format;
>         dsi->mode_flags = device->mode_flags;
>
> -       if (dsi->conn.dev)
> -               drm_helper_hpd_irq_event(dsi->conn.dev);
> -
> -       return 0;
> -}
> -
> -static int mtk_dsi_host_detach(struct mipi_dsi_host *host,
> -                              struct mipi_dsi_device *device)
> -{
> -       struct mtk_dsi *dsi = host_to_dsi(host);
> -
> -       if (dsi->conn.dev)
> -               drm_helper_hpd_irq_event(dsi->conn.dev);
> -
>         return 0;
>  }
>
> @@ -1110,7 +957,6 @@ static ssize_t mtk_dsi_host_transfer(struct mipi_dsi_host *host,
>
>  static const struct mipi_dsi_host_ops mtk_dsi_ops = {
>         .attach = mtk_dsi_host_attach,
> -       .detach = mtk_dsi_host_detach,
>         .transfer = mtk_dsi_host_transfer,
>  };
>
> @@ -1185,6 +1031,7 @@ static int mtk_dsi_probe(struct platform_device *pdev)
>  {
>         struct mtk_dsi *dsi;
>         struct device *dev = &pdev->dev;
> +       struct drm_panel *panel;
>         struct resource *regs;
>         int irq_num;
>         int comp_id;
> @@ -1203,10 +1050,18 @@ static int mtk_dsi_probe(struct platform_device *pdev)
>         }
>
>         ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
> -                                         &dsi->panel, &dsi->next_bridge);
> +                                         &panel, &dsi->next_bridge);
>         if (ret)
>                 goto err_unregister_host;
>
> +       if (panel) {
> +               dsi->next_bridge = devm_drm_panel_bridge_add(dev, panel);
> +               if (IS_ERR(dsi->next_bridge)) {
> +                       ret = PTR_ERR(dsi->next_bridge);
> +                       goto err_unregister_host;
> +               }
> +       }
> +
>         dsi->driver_data = of_device_get_match_data(dev);
>
>         dsi->engine_clk = devm_clk_get(dev, "engine");
> --
> 2.27.0
>

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [RESEND PATCH v4 7/7] drm/mediatek: mtk_dsi: Create connector for bridges
  2020-06-15 20:31 ` [RESEND PATCH v4 7/7] drm/mediatek: mtk_dsi: Create connector for bridges Enric Balletbo i Serra
@ 2020-07-05  0:15   ` Chun-Kuang Hu
  0 siblings, 0 replies; 18+ messages in thread
From: Chun-Kuang Hu @ 2020-07-05  0:15 UTC (permalink / raw)
  To: Enric Balletbo i Serra
  Cc: linux-kernel, Collabora Kernel ML, Matthias Brugger,
	Nicolas Boichat, Hsin-Yi Wang, Laurent Pinchart, Sam Ravnborg,
	Chun-Kuang Hu, Daniel Vetter, David Airlie, Philipp Zabel,
	DRI Development, Linux ARM,
	moderated list:ARM/Mediatek SoC support

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年6月16日 週二 上午4:31寫道:
>
> Use the drm_bridge_connector helper to create a connector for pipelines
> that use drm_bridge. This allows splitting connector operations across
> multiple bridges when necessary, instead of having the last bridge in
> the chain creating the connector and handling all connector operations
> internally.

Applied to mediatek-drm-next [1], thanks.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/log/?h=mediatek-drm-next

Regards,
Chun-Kuang.

>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> Acked-by: Sam Ravnborg <sam@ravnborg.org>
> ---
>
> Changes in v4: None
> Changes in v3:
> - Move the bridge.type line to the patch that adds drm_bridge support. (Laurent Pinchart)
>
> Changes in v2: None
>
>  drivers/gpu/drm/mediatek/mtk_dsi.c | 13 ++++++++++++-
>  1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index 4f3bd095c1eee..471fcafdf3488 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -17,6 +17,7 @@
>
>  #include <drm/drm_atomic_helper.h>
>  #include <drm/drm_bridge.h>
> +#include <drm/drm_bridge_connector.h>
>  #include <drm/drm_mipi_dsi.h>
>  #include <drm/drm_of.h>
>  #include <drm/drm_panel.h>
> @@ -183,6 +184,7 @@ struct mtk_dsi {
>         struct drm_encoder encoder;
>         struct drm_bridge bridge;
>         struct drm_bridge *next_bridge;
> +       struct drm_connector *connector;
>         struct phy *phy;
>
>         void __iomem *regs;
> @@ -977,10 +979,19 @@ static int mtk_dsi_encoder_init(struct drm_device *drm, struct mtk_dsi *dsi)
>          */
>         dsi->encoder.possible_crtcs = 1;
>
> -       ret = drm_bridge_attach(&dsi->encoder, &dsi->bridge, NULL, 0);
> +       ret = drm_bridge_attach(&dsi->encoder, &dsi->bridge, NULL,
> +                               DRM_BRIDGE_ATTACH_NO_CONNECTOR);
>         if (ret)
>                 goto err_cleanup_encoder;
>
> +       dsi->connector = drm_bridge_connector_init(drm, &dsi->encoder);
> +       if (IS_ERR(dsi->connector)) {
> +               DRM_ERROR("Unable to create bridge connector\n");
> +               ret = PTR_ERR(dsi->connector);
> +               goto err_cleanup_encoder;
> +       }
> +       drm_connector_attach_encoder(dsi->connector, &dsi->encoder);
> +
>         return 0;
>
>  err_cleanup_encoder:
> --
> 2.27.0
>

^ permalink raw reply	[flat|nested] 18+ messages in thread

end of thread, other threads:[~2020-07-05  0:16 UTC | newest]

Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-15 20:31 [RESEND PATCH v4 0/7] Convert mtk-dsi to drm_bridge API and get EDID for ps8640 bridge Enric Balletbo i Serra
2020-06-15 20:31 ` [RESEND PATCH v4 1/7] drm/bridge: ps8640: Get the EDID from eDP control Enric Balletbo i Serra
2020-06-15 20:31 ` [RESEND PATCH v4 2/7] drm/bridge_connector: Set default status connected for eDP connectors Enric Balletbo i Serra
2020-06-15 20:31 ` [RESEND PATCH v4 3/7] drm/mediatek: mtk_dsi: Rename bridge to next_bridge Enric Balletbo i Serra
2020-07-04 23:20   ` Chun-Kuang Hu
2020-06-15 20:31 ` [RESEND PATCH v4 4/7] drm/mediatek: mtk_dsi: Convert to bridge driver Enric Balletbo i Serra
2020-07-04 23:34   ` Chun-Kuang Hu
2020-06-15 20:31 ` [RESEND PATCH v4 5/7] drm/mediatek: mtk_dsi: Use simple encoder Enric Balletbo i Serra
2020-07-04 23:42   ` Chun-Kuang Hu
2020-06-15 20:31 ` [RESEND PATCH v4 6/7] drm/mediatek: mtk_dsi: Use the drm_panel_bridge API Enric Balletbo i Serra
2020-07-04 23:57   ` Chun-Kuang Hu
2020-06-15 20:31 ` [RESEND PATCH v4 7/7] drm/mediatek: mtk_dsi: Create connector for bridges Enric Balletbo i Serra
2020-07-05  0:15   ` Chun-Kuang Hu
2020-06-20 21:33 ` [RESEND PATCH v4 0/7] Convert mtk-dsi to drm_bridge API and get EDID for ps8640 bridge Sam Ravnborg
2020-06-30 14:33   ` Enric Balletbo i Serra
2020-06-30 16:26     ` Chun-Kuang Hu
2020-06-30 21:02       ` Enric Balletbo i Serra
2020-06-30 23:02         ` Chun-Kuang Hu

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).