[PATCH 5.4 000/261] 5.4.48-rc1 review

[PATCH 5.4 000/261] 5.4.48-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.4.48 release.
There are 261 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun, 21 Jun 2020 14:15:50 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.48-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.4.48-rc1

Adrian Hunter <adrian.hunter@intel.com>
    perf symbols: Fix kernel maps for kcore and eBPF

Adrian Hunter <adrian.hunter@intel.com>
    perf symbols: Fix debuginfo search for Ubuntu

Masami Hiramatsu <mhiramat@kernel.org>
    perf probe: Check address correctness by map instead of _etext

Masami Hiramatsu <mhiramat@kernel.org>
    perf probe: Fix to check blacklist address correctly

Masami Hiramatsu <mhiramat@kernel.org>
    perf probe: Do not show the skipped events

Jaegeuk Kim <jaegeuk@kernel.org>
    f2fs: fix checkpoint=disable:%u%%

H. Nikolaus Schaller <hns@goldelico.com>
    w1: omap-hdq: cleanup to add missing newline for some dev_dbg

Miquel Raynal <miquel.raynal@bootlin.com>
    mtd: rawnand: tmio: Fix the probe error path

Miquel Raynal <miquel.raynal@bootlin.com>
    mtd: rawnand: mtk: Fix the probe error path

Miquel Raynal <miquel.raynal@bootlin.com>
    mtd: rawnand: pasemi: Fix the probe error path

Miquel Raynal <miquel.raynal@bootlin.com>
    mtd: rawnand: plat_nand: Fix the probe error path

Miquel Raynal <miquel.raynal@bootlin.com>
    mtd: rawnand: sunxi: Fix the probe error path

Miquel Raynal <miquel.raynal@bootlin.com>
    mtd: rawnand: oxnas: Fix the probe error path

Miquel Raynal <miquel.raynal@bootlin.com>
    mtd: rawnand: socrates: Fix the probe error path

Miquel Raynal <miquel.raynal@bootlin.com>
    mtd: rawnand: orion: Fix the probe error path

Miquel Raynal <miquel.raynal@bootlin.com>
    mtd: rawnand: xway: Fix the probe error path

Miquel Raynal <miquel.raynal@bootlin.com>
    mtd: rawnand: ingenic: Fix the probe error path

Miquel Raynal <miquel.raynal@bootlin.com>
    mtd: rawnand: sharpsl: Fix the probe error path

Miquel Raynal <miquel.raynal@bootlin.com>
    mtd: rawnand: diskonchip: Fix the probe error path

Álvaro Fernández Rojas <noltari@gmail.com>
    mtd: rawnand: brcmnand: fix hamming oob layout

Miquel Raynal <miquel.raynal@bootlin.com>
    mtd: rawnand: onfi: Fix redundancy detection check

Boris Brezillon <boris.brezillon@collabora.com>
    mtd: rawnand: Fix nand_gpio_waitrdy()

NeilBrown <neilb@suse.de>
    sunrpc: clean up properly in gss_mech_unregister()

NeilBrown <neilb@suse.de>
    sunrpc: svcauth_gss_register_pseudoflavor must reject duplicate registrations.

Masahiro Yamada <masahiroy@kernel.org>
    kbuild: force to build vmlinux if CONFIG_MODVERSION=y

Michael Ellerman <mpe@ellerman.id.au>
    powerpc/64s: Save FSCR to init_task.thread.fscr after feature init

Michael Ellerman <mpe@ellerman.id.au>
    powerpc/64s: Don't let DT CPU features set FSCR_DSCR

Christophe Leroy <christophe.leroy@csgroup.eu>
    powerpc/32: Disable KASAN with pages bigger than 16k

Christophe Leroy <christophe.leroy@csgroup.eu>
    powerpc/kasan: Fix shadow pages allocation failure

Christophe Leroy <christophe.leroy@csgroup.eu>
    powerpc/kasan: Fix issues by lowering KASAN_SHADOW_END

Christophe Leroy <christophe.leroy@csgroup.eu>
    powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG

Michael Ellerman <mpe@ellerman.id.au>
    drivers/macintosh: Fix memleak in windfarm_pm112 driver

Jonathan Bakker <xc-racer2@live.ca>
    ARM: dts: s5pv210: Set keep-power-in-suspend for SDHCI1 on Aries

Ludovic Desroches <ludovic.desroches@microchip.com>
    ARM: dts: at91: sama5d2_ptc_ek: fix vbus pin

Marek Szyprowski <m.szyprowski@samsung.com>
    ARM: dts: exynos: Fix GPIO polarity for thr GalaxyS3 CM36651 sensor's bus

Corentin Labbe <clabbe@baylibre.com>
    soc/tegra: pmc: Select GENERIC_PINCONF

Dmitry Osipenko <digetx@gmail.com>
    ARM: tegra: Correct PL310 Auxiliary Control Register initialization

Douglas Anderson <dianders@chromium.org>
    kernel/cpu_pm: Fix uninitted local in cpu_pm

Hari Bathini <hbathini@linux.ibm.com>
    powerpc/fadump: Account for memory_limit while reserving memory

Hari Bathini <hbathini@linux.ibm.com>
    powerpc/fadump: consider reserved ranges while reserving memory

Hari Bathini <hbathini@linux.ibm.com>
    powerpc/fadump: use static allocation for reserved memory ranges

Mikulas Patocka <mpatocka@redhat.com>
    alpha: fix memory barriers so that they conform to the specification

Eric Biggers <ebiggers@google.com>
    dm crypt: avoid truncating the logical block size

Al Viro <viro@zeniv.linux.org.uk>
    sparc64: fix misuses of access_process_vm() in genregs32_[sg]et()

Al Viro <viro@zeniv.linux.org.uk>
    sparc32: fix register window handling in genregs32_[gs]et()

Wei Yongjun <weiyongjun1@huawei.com>
    gnss: sirf: fix error return code in sirf_probe()

Jonathan Bakker <xc-racer2@live.ca>
    pinctrl: samsung: Save/restore eint_mask over suspend for EINT_TYPE GPIOs

Jonathan Bakker <xc-racer2@live.ca>
    pinctrl: samsung: Correct setting of eint wakeup mask on s5pv210

Qiushi Wu <wu000273@umn.edu>
    power: supply: core: fix memory leak in HWMON error path

Michał Mirosław <mirq-linux@rere.qmqm.pl>
    power: supply: core: fix HWMON temperature labels

Anders Roxell <anders.roxell@linaro.org>
    power: vexpress: add suppress_bind_attrs to true

Alexander Monakov <amonakov@ispras.ru>
    EDAC/amd64: Add AMD family 17h model 60h PCI IDs

Alexander Monakov <amonakov@ispras.ru>
    hwmon: (k10temp) Add AMD family 17h model 60h PCI match

Kai-Heng Feng <kai.heng.feng@canonical.com>
    igb: Report speed and duplex as unknown when device is runtime suspended

Weiyi Lu <weiyi.lu@mediatek.com>
    clk: mediatek: assign the initial value to clk_init_data of mtk_mux

Tomi Valkeinen <tomi.valkeinen@ti.com>
    media: ov5640: fix use of destroyed mutex

Larry Finger <Larry.Finger@lwfinger.net>
    b43_legacy: Fix connection problem with WPA3

Larry Finger <Larry.Finger@lwfinger.net>
    b43: Fix connection problem with WPA3

Larry Finger <Larry.Finger@lwfinger.net>
    b43legacy: Fix case where channel status is corrupted

Michał Mirosław <mirq-linux@rere.qmqm.pl>
    Bluetooth: hci_bcm: fix freeing not-requested IRQ

Lukas Wunner <lukas@wunner.de>
    serial: 8250: Avoid error message on reprobe

Samuel Holland <samuel@sholland.org>
    media: cedrus: Program output format during each run

Chuhong Yuan <hslester96@gmail.com>
    media: go7007: fix a miss of snd_card_free

Christian Lamparter <chunkeey@gmail.com>
    carl9170: remove P2P_GO support

Punit Agrawal <punit1.agrawal@toshiba.co.jp>
    e1000e: Relax condition to trigger reset for ME workaround

Kai-Heng Feng <kai.heng.feng@canonical.com>
    e1000e: Disable TSO for buffer overrun workaround

Ashok Raj <ashok.raj@intel.com>
    PCI: Program MPS for RCiEP devices

Krzysztof Struczynski <krzysztof.struczynski@huawei.com>
    ima: Set again build_ima_appraise variable

Krzysztof Struczynski <krzysztof.struczynski@huawei.com>
    ima: Remove redundant policy rule set in add_rules()

Alexander Monakov <amonakov@ispras.ru>
    x86/amd_nb: Add AMD family 17h model 60h PCI IDs

Kai-Heng Feng <kai.heng.feng@canonical.com>
    serial: 8250_pci: Move Pericom IDs to pci_ids.h

Tiezhu Yang <yangtiezhu@loongson.cn>
    PCI: Add Loongson vendor ID

Yazen Ghannam <yazen.ghannam@amd.com>
    x86/amd_nb: Add Family 19h PCI IDs

Jon Derrick <jonathan.derrick@intel.com>
    PCI: vmd: Add device id for VMD device 8086:9A0B

Ashok Raj <ashok.raj@intel.com>
    PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints

Kevin Buettner <kevinb@redhat.com>
    PCI: Avoid FLR for AMD Starship USB 3.0

Marcos Scriven <marcos@scriven.org>
    PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0

Kai-Heng Feng <kai.heng.feng@canonical.com>
    PCI: Avoid Pericom USB controller OHCI/EHCI PME# defect

Eric Biggers <ebiggers@google.com>
    ext4: fix race between ext4_sync_parent() and rename()

Jeffle Xu <jefflexu@linux.alibaba.com>
    ext4: fix error pointer dereference

Harshad Shirwadkar <harshadshirwadkar@gmail.com>
    ext4: fix EXT_MAX_EXTENT/INDEX to check for zeroed eh_max

Roberto Sassu <roberto.sassu@huawei.com>
    evm: Fix possible memory leak in evm_calc_hmac_or_hash()

Roberto Sassu <roberto.sassu@huawei.com>
    ima: Remove __init annotation from ima_pcrread()

Roberto Sassu <roberto.sassu@huawei.com>
    ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()

Roberto Sassu <roberto.sassu@huawei.com>
    ima: Directly assign the ima_default_policy pointer to ima_rules

Roberto Sassu <roberto.sassu@huawei.com>
    ima: Evaluate error in init_ima()

Roberto Sassu <roberto.sassu@huawei.com>
    ima: Switch to ima_hash_algo for boot aggregate

Krzysztof Struczynski <krzysztof.struczynski@huawei.com>
    ima: Fix ima digest hash table key calculation

Pavel Tatashin <pasha.tatashin@soleen.com>
    mm: call cond_resched() from deferred_init_memmap()

Daniel Jordan <daniel.m.jordan@oracle.com>
    mm/pagealloc.c: call touch_nmi_watchdog() on max order boundaries in deferred init

Lichao Liu <liulichao@loongson.cn>
    MIPS: CPU_LOONGSON2EF need software to maintain cache consistency

Pavel Tatashin <pasha.tatashin@soleen.com>
    mm: initialize deferred pages with interrupts enabled

Andrea Arcangeli <aarcange@redhat.com>
    mm: thp: make the THP mapcount atomic against __split_huge_pmd_locked()

Christophe Leroy <christophe.leroy@csgroup.eu>
    powerpc/mm: Fix conditions to perform MMU specific management by blocks on PPC32.

Filipe Manana <fdmanana@suse.com>
    btrfs: fix space_info bytes_may_use underflow during space cache writeout

Filipe Manana <fdmanana@suse.com>
    btrfs: fix space_info bytes_may_use underflow after nocow buffered write

Filipe Manana <fdmanana@suse.com>
    btrfs: fix wrong file range cleanup after an error filling dealloc range

Omar Sandoval <osandov@fb.com>
    btrfs: fix error handling when submitting direct I/O bio

Josef Bacik <josef@toxicpanda.com>
    btrfs: force chunk allocation if our global rsv is larger than metadata

Marcos Paulo de Souza <mpdesouza@suse.com>
    btrfs: send: emit file capabilities after chown

Anand Jain <anand.jain@oracle.com>
    btrfs: include non-missing as a qualifier for the latest_bdev

Anand Jain <anand.jain@oracle.com>
    btrfs: free alien device after device add

Daniel Axtens <dja@axtens.net>
    string.h: fix incompatibility between FORTIFY_SOURCE and KASAN

Daniel Axtens <dja@axtens.net>
    kasan: stop tests being eliminated as dead code with FORTIFY_SOURCE

Jakub Sitnicki <jakub@cloudflare.com>
    selftests/bpf, flow_dissector: Close TAP device FD after the test

John Fastabend <john.fastabend@gmail.com>
    bpf: Fix running sk_skb program types with ktls

John Fastabend <john.fastabend@gmail.com>
    bpf: Refactor sockmap redirect code so its easy to reuse

Anton Protopopov <a.s.protopopov@gmail.com>
    bpf: Fix map permissions check

Eelco Chaudron <echaudro@redhat.com>
    libbpf: Fix perf_buffer__free() API for sparse allocs

Chris Chiu <chiu@endlessm.com>
    platform/x86: asus_wmi: Reserve more space for struct bias_args

Hans de Goede <hdegoede@redhat.com>
    platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type

Nickolai Kozachenko <daemongloom@gmail.com>
    platform/x86: intel-hid: Add a quirk to support HP Spectre X2 (2015)

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    platform/x86: hp-wmi: Convert simple_strtoul() to kstrtou32()

Qiushi Wu <wu000273@umn.edu>
    cpuidle: Fix three reference count leaks

Serge Semin <Sergey.Semin@baikalelectronics.ru>
    spi: dw: Return any value retrieved from the dma_transfer callback

Haibo Chen <haibo.chen@nxp.com>
    mmc: sdhci-esdhc-imx: fix the mask for tuning start point

Sharon <sara.sharon@intel.com>
    iwlwifi: mvm: fix aux station leak

Xie XiuQi <xiexiuqi@huawei.com>
    ixgbe: fix signed-integer-overflow warning

Jacob Keller <jacob.e.keller@intel.com>
    ice: fix potential double free in probe unrolling

Ulf Hansson <ulf.hansson@linaro.org>
    mmc: via-sdmmc: Respect the cmd->busy_timeout from the mmc core

Ulf Hansson <ulf.hansson@linaro.org>
    staging: greybus: sdio: Respect the cmd->busy_timeout from the mmc core

Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
    mmc: sdhci-msm: Set SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 quirk

Coly Li <colyli@suse.de>
    bcache: fix refcount underflow in bcache_device_free()

YuanJunQing <yuanjunqing66@163.com>
    MIPS: Fix IRQ tracing when call handle_fpe() and handle_msa_fpe()

Jiaxun Yang <jiaxun.yang@flygoat.com>
    PCI: Don't disable decoding when mmio_always_on is set

Alexander Sverdlin <alexander.sverdlin@nokia.com>
    macvlan: Skip loopback packets in RX handler

Fugang Duan <fugang.duan@nxp.com>
    net: ethernet: fec: move GPR register offset and bit into DT

Qu Wenruo <wqu@suse.com>
    btrfs: qgroup: mark qgroup inconsistent if we're inherting snapshot to a new qgroup

Josef Bacik <josef@toxicpanda.com>
    btrfs: improve global reserve stealing logic

Finn Thain <fthain@telegraphics.com.au>
    m68k: mac: Don't call via_flush_cache() on Mac IIfx

Kaige Li <likaige@loongson.cn>
    MIPS: tools: Fix resource leak in elf-entry.c

Arvind Sankar <nivedita@alum.mit.edu>
    x86/mm: Stop printing BRK addresses

Alan Maguire <alan.maguire@oracle.com>
    selftests/bpf: CONFIG_IPV6_SEG6_BPF required for test_seg6_loop.o

Felix Kuehling <Felix.Kuehling@amd.com>
    drm/amdgpu: Sync with VM root BO when switching VM to CPU update mode

chen gong <curry.gong@amd.com>
    drm/amd/powerpay: Disable gfxoff when setting manual mode on picasso and raven

Nicolas Toromanoff <nicolas.toromanoff@st.com>
    crypto: stm32/crc32 - fix multi-instance

Nicolas Toromanoff <nicolas.toromanoff@st.com>
    crypto: stm32/crc32 - fix run-time self test issue.

Nicolas Toromanoff <nicolas.toromanoff@st.com>
    crypto: stm32/crc32 - fix ext4 chksum BUG_ON()

Serge Semin <Sergey.Semin@baikalelectronics.ru>
    mips: Add udelay lpj numbers adjustment

Serge Semin <Sergey.Semin@baikalelectronics.ru>
    mips: MAAR: Use more precise address mask

Huaixin Chang <changhuaixin@linux.alibaba.com>
    sched: Defend cfs and rt bandwidth quota against overflow

Arvind Sankar <nivedita@alum.mit.edu>
    x86/boot: Correct relocation destination on old linkers

Douglas Anderson <dianders@chromium.org>
    kgdboc: Use a platform device to handle tty drivers showing up late

Pali Rohár <pali@kernel.org>
    mwifiex: Fix memory corruption in dump_station

Dan Carpenter <dan.carpenter@oracle.com>
    rtlwifi: Fix a double free in _rtl_usb_tx_urb_setup()

Erez Shitrit <erezsh@mellanox.com>
    net/mlx5e: IPoIB, Drop multicast packets that this interface sent

Jesper Dangaard Brouer <brouer@redhat.com>
    veth: Adjust hard_start offset on redirect XDP frames

Tejun Heo <tj@kernel.org>
    iocost: don't let vrate run wild while there's no saturation signal

Coly Li <colyli@suse.de>
    raid5: remove gfp flags from scribble_alloc()

Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
    md: don't flush workqueue unconditionally in md_open

Ryder Lee <ryder.lee@mediatek.com>
    mt76: avoid rx reorder buffer overflow

Wei Yongjun <weiyongjun1@huawei.com>
    drm/mcde: dsi: Fix return value check in mcde_dsi_bind()

Bhupesh Sharma <bhsharma@redhat.com>
    net: qed*: Reduce RX and TX default ring count when running inside kdump kernel

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    wcn36xx: Fix error handling path in 'wcn36xx_probe()'

Rakesh Pillai <pillair@codeaurora.org>
    ath10k: Remove msdu from idr when management pkt send fails

Sagi Grimberg <sagi@grimberg.me>
    nvme-tcp: use bh_lock in data_ready

Weiping Zhang <zhangweiping@didiglobal.com>
    nvme-pci: align io queue count with allocted nvme_queue in nvme_probe

Christoph Hellwig <hch@lst.de>
    nvme: refine the Qemu Identify CNS quirk

Mordechay Goodstein <mordechay.goodstein@intel.com>
    iwlwifi: avoid debug max amsdu config overwriting itself

Hans de Goede <hdegoede@redhat.com>
    platform/x86: intel-vbtn: Also handle tablet-mode switch on "Detachable" and "Portable" chassis-types

Hans de Goede <hdegoede@redhat.com>
    platform/x86: intel-vbtn: Do not advertise switches to userspace if they are not there

Hans de Goede <hdegoede@redhat.com>
    platform/x86: intel-vbtn: Split keymap into buttons and switches parts

Hans de Goede <hdegoede@redhat.com>
    platform/x86: intel-vbtn: Use acpi_evaluate_integer()

Brian Foster <bfoster@redhat.com>
    xfs: fix duplicate verification from xfs_qm_dqflush()

Brian Foster <bfoster@redhat.com>
    xfs: reset buffer write failure state on successful completion

Daniel Thompson <daniel.thompson@linaro.org>
    kgdb: Fix spurious true from in_dbg_master()

Serge Semin <Sergey.Semin@baikalelectronics.ru>
    mips: cm: Fix an invalid error code of INTVN_*_ERR

Jiaxun Yang <jiaxun.yang@flygoat.com>
    MIPS: Truncate link address into 32bit for 32bit kernel

Devulapally Shiva Krishna <shiva@chelsio.com>
    Crypto/chcr: fix for ccm(aes) failed test

Darrick J. Wong <darrick.wong@oracle.com>
    xfs: clean up the error handling in xfs_swap_extents

Colin Ian King <colin.king@canonical.com>
    libertas_tf: avoid a null dereference in pointer priv

Jeremy Kerr <jk@ozlabs.org>
    powerpc/spufs: fix copy_to_user while atomic

Yunjian Wang <wangyunjian@huawei.com>
    net: allwinner: Fix use correct return type for ndo_start_xmit()

Dan Carpenter <dan.carpenter@oracle.com>
    media: cec: silence shift wrapping warning in __cec_s_log_addrs()

Wei Yongjun <weiyongjun1@huawei.com>
    drivers: net: davinci_mdio: fix potential NULL dereference in davinci_mdio_probe()

Wei Yongjun <weiyongjun1@huawei.com>
    selinux: fix error return code in policydb_read()

Wei Yongjun <weiyongjun1@huawei.com>
    net: lpc-enet: fix error return code in lpc_mii_init()

Tejun Heo <tj@kernel.org>
    iocost_monitor: drop string wrap around numbers when outputting json

Shaokun Zhang <zhangshaokun@hisilicon.com>
    drivers/perf: hisi: Fix typo in events attribute array

Peter Zijlstra <peterz@infradead.org>
    sched/core: Fix illegal RCU from offline CPUs

Jann Horn <jannh@google.com>
    exit: Move preemption fixup up, move blocking operations down

Nathan Chancellor <natechancellor@gmail.com>
    lib/mpi: Fix 64-bit MIPS build with Clang

Doug Berger <opendmb@gmail.com>
    net: bcmgenet: Fix WoL with password after deep sleep

Doug Berger <opendmb@gmail.com>
    net: bcmgenet: set Rx mode before starting netif

Andrii Nakryiko <andriin@fb.com>
    selftests/bpf: Fix memory leak in extract_build_id()

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nft_nat: return EOPNOTSUPP if type or flags are not supported

Jesper Dangaard Brouer <brouer@redhat.com>
    dpaa2-eth: fix return codes used in ndo_setup_tc

Andrea Parri (Microsoft) <parri.andrea@gmail.com>
    Drivers: hv: vmbus: Always handle the VMBus messages on CPU0

Paul Moore <paul@paul-moore.com>
    audit: fix a net reference leak in audit_list_rules_send()

Hans de Goede <hdegoede@redhat.com>
    Bluetooth: btbcm: Add 2 missing models to subver tables

Wen Gong <wgong@codeaurora.org>
    ath10k: add flush tx packets for SDIO chip

Tiezhu Yang <yangtiezhu@loongson.cn>
    MIPS: Make sparse_init() using top-down allocation

Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
    media: platform: fcp: Set appropriate DMA parameters

Colin Ian King <colin.king@canonical.com>
    media: dvb: return -EREMOTEIO on i2c transfer failure.

Paul Moore <paul@paul-moore.com>
    audit: fix a net reference leak in audit_send_reply()

Jitao Shi <jitao.shi@mediatek.com>
    drm/mediatek: set dpi pin mode to gpio low to avoid leakage current

Jitao Shi <jitao.shi@mediatek.com>
    dt-bindings: display: mediatek: control dpi pins mode to avoid leakage

Kees Cook <keescook@chromium.org>
    e1000: Distribute switch variables for initialization

Stephane Eranian <eranian@google.com>
    tools api fs: Make xxx__mountpoint() more scalable

Bjorn Andersson <bjorn.andersson@linaro.org>
    regulator: qcom-rpmh: Fix typos in pm8150 and pm8150l

Jaehoon Chung <jh80.chung@samsung.com>
    brcmfmac: fix wrong location to get firmware feature

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    spi: Respect DataBitLength field of SpiSerialBusV2() ACPI resource

Bingbu Cao <bingbu.cao@intel.com>
    media: staging/intel-ipu3: Implement lock for stream on/off operations

Venkateswara Naralasetty <vnaralas@codeaurora.org>
    ath10k: fix kernel null pointer dereference

Christoph Hellwig <hch@lst.de>
    staging: android: ion: use vmap instead of vm_map_ram

Christoph Hellwig <hch@lst.de>
    x86: fix vmap arguments in map_irq_stack

Jia-Ju Bai <baijiaju1990@gmail.com>
    net: vmxnet3: fix possible buffer overflow caused by bad DMA value in vmxnet3_get_rss()

Jon Doron <arilou@gmail.com>
    x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit

Serge Semin <Sergey.Semin@baikalelectronics.ru>
    spi: dw: Fix Rx-only DMA transfers

Chuhong Yuan <hslester96@gmail.com>
    Bluetooth: btmtkuart: Improve exception handling in btmtuart_probe()

Martin Blumenstingl <martin.blumenstingl@googlemail.com>
    mmc: meson-mx-sdio: trigger a soft reset after a timeout or CRC error

Surabhi Boob <surabhi.boob@intel.com>
    ice: Fix for memory leaks and modify ICE_FREE_CQ_BUFS

Surabhi Boob <surabhi.boob@intel.com>
    ice: Fix memory leak

Sven Eckelmann <sven@narfation.org>
    batman-adv: Revert "disable ethtool link speed detection when auto negotiation off"

Linus Walleij <linus.walleij@linaro.org>
    ARM: 8978/1: mm: make act_mm() respect THREAD_SIZE

Filipe Manana <fdmanana@suse.com>
    btrfs: do not ignore error from btrfs_next_leaf() when inserting checksums

Josef Bacik <josef@toxicpanda.com>
    btrfs: account for trans_block_rsv in may_commit_transaction

Brad Love <brad@nextdimension.cc>
    media: dvbdev: Fix tuner->demod media controller link

Serge Semin <Sergey.Semin@baikalelectronics.ru>
    clocksource: dw_apb_timer_of: Fix missing clockevent timers

Serge Semin <Sergey.Semin@baikalelectronics.ru>
    clocksource: dw_apb_timer: Make CPU-affiliation being optional

Serge Semin <Sergey.Semin@baikalelectronics.ru>
    spi: dw: Enable interrupts in accordance with DMA xfer mode

Serge Semin <Sergey.Semin@baikalelectronics.ru>
    mips: Fix cpu_has_mips64r1/2 activation for MIPS32 CPUs

Tuan Phan <tuanphan@os.amperecomputing.com>
    ACPI/IORT: Fix PMCG node single ID mapping handling

Jean-Philippe Brucker <jean-philippe@linaro.org>
    pmu/smmuv3: Clear IRQ affinity hint on device removal

Douglas Anderson <dianders@chromium.org>
    kgdb: Prevent infinite recursive entries to the debugger

Douglas Anderson <dianders@chromium.org>
    kgdb: Disable WARN_CONSOLE_UNLOCKED for all kgdb

Hsin-Yu Chao <hychao@chromium.org>
    Bluetooth: Add SCO fallback for invalid LMP parameters error

Tiezhu Yang <yangtiezhu@loongson.cn>
    MIPS: Loongson: Build ATI Radeon GPU driver as module

Koba Ko <koba.ko@canonical.com>
    platform/x86: dell-laptop: don't register micmute LED if there is no token

Jesper Dangaard Brouer <brouer@redhat.com>
    ixgbe: Fix XDP redirect on archs with PAGE_SIZE above 4K

Jeremy Cline <jcline@redhat.com>
    lockdown: Allow unprivileged users to see lockdown status

Tomohito Esaki <etom@igel.co.jp>
    drm: rcar-du: Set primary plane zpos immutably at initializing

Weiping Zhang <zhangweiping@didiglobal.com>
    block: reset mapping if failed to update hardware queue count

Luke Nelson <lukenels@cs.washington.edu>
    arm64: insn: Fix two bugs in encoding 32-bit logical immediates

Ming Lei <ming.lei@redhat.com>
    block: alloc map and request for new hardware queue

Erik Kaneda <erik.kaneda@intel.com>
    ACPICA: Dispatcher: add status checks

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    spi: dw: Zero DMA Tx and Rx configurations on stack

Dejin Zheng <zhengdejin5@gmail.com>
    rtw88: fix an issue about leak system resources

Tomasz Figa <tfiga@chromium.org>
    media: staging: ipu3: Fix stale list entries on parameter queue failure

Daniel Thompson <daniel.thompson@linaro.org>
    arm64: cacheflush: Fix KGDB trap detection

Wen Gong <wgong@codeaurora.org>
    ath10k: remove the max_sched_scan_reqs value

Ard Biesheuvel <ardb@kernel.org>
    efi/libstub/x86: Work around LLVM ELF quirk build regression

Arthur Kiyanovski <akiyano@amazon.com>
    net: ena: fix error returning in ena_com_get_hash_function()

Mark Starovoytov <mstarovoitov@marvell.com>
    net: atlantic: make hw_get_regs optional

Huaixin Chang <changhuaixin@linux.alibaba.com>
    sched/fair: Refill bandwidth before scaling

Peter Zijlstra <peterz@infradead.org>
    x86,smap: Fix smap_{save,restore}() alternatives

Evan Green <evgreen@chromium.org>
    spi: pxa2xx: Apply CS clk quirk to BXT

Andrii Nakryiko <andriin@fb.com>
    libbpf: Fix memory leak and possible double-free in hashmap__clear

Gavin Shan <gshan@redhat.com>
    arm64/kernel: Fix range on invalidating dcache for boot page tables

limingyu <limingyu@uniontech.com>
    drm/amdgpu: Init data to avoid oops while reading pp_num_states.

Geert Uytterhoeven <geert+renesas@glider.be>
    spi: spi-mem: Fix Dual/Quad modes on Octal-capable devices

Julien Thierry <jthierry@redhat.com>
    objtool: Ignore empty alternatives

Brad Love <brad@nextdimension.cc>
    media: si2157: Better check for running tuner in init

Dan Carpenter <dan.carpenter@oracle.com>
    media: vicodec: Fix error codes in probe function

Arnd Bergmann <arnd@arndb.de>
    crypto: ccp -- don't "select" CONFIG_DMADEVICES

Laurent Pinchart <laurent.pinchart@ideasonboard.com>
    media: imx: imx7-mipi-csis: Cleanup and fix subdev pad format handling

Bingbu Cao <bingbu.cao@intel.com>
    media: staging: imgu: do not hold spinlock during freeing mmu page table

Bogdan Togorean <bogdan.togorean@analog.com>
    drm: bridge: adv7511: Extend list of audio sample rates

Maharaja Kennadyrajan <mkenna@codeaurora.org>
    ath10k: Fix the race condition in firmware dump work queue

Christian König <christian.koenig@amd.com>
    drm/amdgpu: fix and cleanup amdgpu_gem_object_close v4

Ard Biesheuvel <ardb@kernel.org>
    ACPI: GED: use correct trigger type field in _Exx / _Lxx handling


-------------

Diffstat:

 .../bindings/display/mediatek/mediatek,dpi.txt     |   6 +
 Documentation/virt/kvm/api.txt                     |   2 +
 Makefile                                           |  17 +-
 arch/alpha/include/asm/io.h                        |  74 +++++--
 arch/alpha/kernel/io.c                             |  60 +++++-
 arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts          |   2 +-
 arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi        |   2 +-
 arch/arm/boot/dts/s5pv210-aries.dtsi               |   1 +
 arch/arm/mach-tegra/tegra.c                        |   4 +-
 arch/arm/mm/proc-macros.S                          |   3 +-
 arch/arm64/include/asm/cacheflush.h                |   6 +-
 arch/arm64/include/asm/pgtable.h                   |   1 +
 arch/arm64/kernel/head.S                           |  12 +-
 arch/arm64/kernel/insn.c                           |  14 +-
 arch/arm64/kernel/vmlinux.lds.S                    |   1 +
 arch/m68k/include/asm/mac_via.h                    |   1 +
 arch/m68k/mac/config.c                             |  21 +-
 arch/m68k/mac/via.c                                |   6 +-
 arch/mips/Makefile                                 |  13 +-
 arch/mips/boot/compressed/Makefile                 |   2 +-
 arch/mips/configs/loongson3_defconfig              |   2 +-
 arch/mips/include/asm/cpu-features.h               |   6 +-
 arch/mips/include/asm/mipsregs.h                   |   2 +-
 arch/mips/kernel/genex.S                           |   6 +-
 arch/mips/kernel/mips-cm.c                         |   6 +-
 arch/mips/kernel/setup.c                           |  10 +
 arch/mips/kernel/time.c                            |  70 +++++++
 arch/mips/kernel/vmlinux.lds.S                     |   2 +-
 arch/mips/mm/dma-noncoherent.c                     |   1 +
 arch/mips/tools/elf-entry.c                        |   9 +-
 arch/powerpc/Kconfig                               |   2 +-
 arch/powerpc/include/asm/book3s/32/kup.h           |   3 +-
 arch/powerpc/include/asm/fadump-internal.h         |   4 +-
 arch/powerpc/include/asm/kasan.h                   |   6 +-
 arch/powerpc/kernel/dt_cpu_ftrs.c                  |   8 +
 arch/powerpc/kernel/fadump.c                       | 155 ++++++++++----
 arch/powerpc/kernel/prom.c                         |  19 ++
 arch/powerpc/mm/init_32.c                          |   2 -
 arch/powerpc/mm/kasan/kasan_init_32.c              |   4 +-
 arch/powerpc/mm/pgtable_32.c                       |   4 +-
 arch/powerpc/platforms/cell/spufs/file.c           | 113 ++++++----
 arch/powerpc/platforms/powernv/smp.c               |   1 -
 arch/sparc/kernel/ptrace_32.c                      | 228 +++++++++------------
 arch/sparc/kernel/ptrace_64.c                      |  17 +-
 arch/x86/boot/compressed/head_32.S                 |   5 +-
 arch/x86/boot/compressed/head_64.S                 |   1 +
 arch/x86/include/asm/smap.h                        |  11 +-
 arch/x86/kernel/amd_nb.c                           |   8 +
 arch/x86/kernel/irq_64.c                           |   2 +-
 arch/x86/mm/init.c                                 |   2 -
 block/blk-iocost.c                                 |  28 ++-
 block/blk-mq.c                                     |  26 +--
 drivers/acpi/acpica/dsfield.c                      |  17 +-
 drivers/acpi/arm64/iort.c                          |   5 +
 drivers/acpi/evged.c                               |   2 +-
 drivers/bluetooth/btbcm.c                          |   2 +
 drivers/bluetooth/btmtkuart.c                      |  14 +-
 drivers/bluetooth/hci_bcm.c                        |   5 +-
 drivers/clk/mediatek/clk-mux.c                     |   2 +-
 drivers/clocksource/dw_apb_timer.c                 |   5 +-
 drivers/clocksource/dw_apb_timer_of.c              |   6 +-
 drivers/cpuidle/sysfs.c                            |   6 +-
 drivers/crypto/ccp/Kconfig                         |   3 +-
 drivers/crypto/chelsio/chcr_algo.c                 |   2 +-
 drivers/crypto/stm32/stm32-crc32.c                 | 144 +++++++------
 drivers/edac/amd64_edac.c                          |  13 ++
 drivers/edac/amd64_edac.h                          |   3 +
 drivers/firmware/efi/libstub/Makefile              |   1 +
 drivers/gnss/sirf.c                                |   8 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c            |  43 ++--
 drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c             |  14 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c             |  11 +-
 drivers/gpu/drm/bridge/adv7511/adv7511_audio.c     |  12 +-
 drivers/gpu/drm/mcde/mcde_dsi.c                    |   7 +-
 drivers/gpu/drm/mediatek/mtk_dpi.c                 |  31 +++
 drivers/gpu/drm/rcar-du/rcar_du_plane.c            |  16 +-
 drivers/gpu/drm/rcar-du/rcar_du_vsp.c              |  14 +-
 drivers/hv/connection.c                            |  20 +-
 drivers/hv/hv.c                                    |   7 +
 drivers/hv/hyperv_vmbus.h                          |  11 +-
 drivers/hv/vmbus_drv.c                             |  20 +-
 drivers/hwmon/k10temp.c                            |   1 +
 drivers/macintosh/windfarm_pm112.c                 |  21 +-
 drivers/md/bcache/super.c                          |   7 +-
 drivers/md/dm-crypt.c                              |   2 +-
 drivers/md/md.c                                    |   3 +-
 drivers/md/raid5.c                                 |  15 +-
 drivers/media/cec/cec-adap.c                       |   8 +-
 drivers/media/dvb-core/dvbdev.c                    |   5 +-
 drivers/media/i2c/ov5640.c                         |   4 +-
 drivers/media/platform/rcar-fcp.c                  |   5 +
 drivers/media/platform/vicodec/vicodec-core.c      |  15 +-
 drivers/media/tuners/si2157.c                      |  15 +-
 drivers/media/usb/dvb-usb/dibusb-mb.c              |   2 +-
 drivers/media/usb/go7007/snd-go7007.c              |  35 ++--
 drivers/mmc/host/meson-mx-sdio.c                   |   3 +
 drivers/mmc/host/sdhci-esdhc-imx.c                 |   2 +-
 drivers/mmc/host/sdhci-msm.c                       |   4 +-
 drivers/mmc/host/via-sdmmc.c                       |   7 +-
 drivers/mtd/nand/raw/brcmnand/brcmnand.c           |  11 +-
 drivers/mtd/nand/raw/diskonchip.c                  |   7 +-
 drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c    |   2 +-
 drivers/mtd/nand/raw/mtk_nand.c                    |   2 +-
 drivers/mtd/nand/raw/nand_base.c                   |  10 +-
 drivers/mtd/nand/raw/nand_onfi.c                   |   2 +-
 drivers/mtd/nand/raw/orion_nand.c                  |   2 +-
 drivers/mtd/nand/raw/oxnas_nand.c                  |   8 +-
 drivers/mtd/nand/raw/pasemi_nand.c                 |   4 +-
 drivers/mtd/nand/raw/plat_nand.c                   |   2 +-
 drivers/mtd/nand/raw/sharpsl.c                     |   2 +-
 drivers/mtd/nand/raw/socrates_nand.c               |   2 +-
 drivers/mtd/nand/raw/sunxi_nand.c                  |   2 +-
 drivers/mtd/nand/raw/tmio_nand.c                   |   2 +-
 drivers/mtd/nand/raw/xway_nand.c                   |   2 +-
 drivers/net/ethernet/allwinner/sun4i-emac.c        |   4 +-
 drivers/net/ethernet/amazon/ena/ena_com.c          |   6 +-
 drivers/net/ethernet/aquantia/atlantic/aq_nic.c    |   6 +
 drivers/net/ethernet/broadcom/genet/bcmgenet.c     |   4 +
 drivers/net/ethernet/broadcom/genet/bcmgenet.h     |   2 +
 drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c |  39 ++--
 drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c   |   4 +-
 drivers/net/ethernet/freescale/fec_main.c          |  24 +--
 drivers/net/ethernet/intel/e1000/e1000_main.c      |   4 +-
 drivers/net/ethernet/intel/e1000e/e1000.h          |   1 -
 drivers/net/ethernet/intel/e1000e/netdev.c         |  16 +-
 drivers/net/ethernet/intel/ice/ice_common.c        |   8 +-
 drivers/net/ethernet/intel/ice/ice_controlq.c      |  49 +++--
 drivers/net/ethernet/intel/ice/ice_main.c          |   3 +-
 drivers/net/ethernet/intel/igb/igb_ethtool.c       |   3 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c    |   2 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c      |   3 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_rx.c    |  15 +-
 drivers/net/ethernet/nxp/lpc_eth.c                 |   3 +-
 drivers/net/ethernet/qlogic/qede/qede.h            |   2 +
 drivers/net/ethernet/qlogic/qede/qede_main.c       |  11 +-
 drivers/net/ethernet/ti/davinci_mdio.c             |   2 +
 drivers/net/macvlan.c                              |   4 +
 drivers/net/veth.c                                 |   8 +-
 drivers/net/vmxnet3/vmxnet3_ethtool.c              |   2 +
 drivers/net/wireless/ath/ath10k/htt.h              |   7 +
 drivers/net/wireless/ath/ath10k/htt_tx.c           |   8 +-
 drivers/net/wireless/ath/ath10k/mac.c              |   5 +-
 drivers/net/wireless/ath/ath10k/pci.c              |   1 +
 drivers/net/wireless/ath/ath10k/txrx.c             |   2 +
 drivers/net/wireless/ath/ath10k/wmi-ops.h          |  10 +
 drivers/net/wireless/ath/ath10k/wmi-tlv.c          |  15 ++
 drivers/net/wireless/ath/carl9170/fw.c             |   4 +-
 drivers/net/wireless/ath/carl9170/main.c           |  21 +-
 drivers/net/wireless/ath/wcn36xx/main.c            |   6 +-
 drivers/net/wireless/broadcom/b43/main.c           |   2 +-
 drivers/net/wireless/broadcom/b43legacy/main.c     |   1 +
 drivers/net/wireless/broadcom/b43legacy/xmit.c     |   1 +
 .../wireless/broadcom/brcm80211/brcmfmac/feature.c |   3 +-
 drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c   |  11 +-
 drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c  |   5 +-
 drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c     |  15 +-
 drivers/net/wireless/intel/iwlwifi/mvm/sta.c       |  18 +-
 drivers/net/wireless/intel/iwlwifi/mvm/sta.h       |   6 +-
 drivers/net/wireless/marvell/libertas_tf/if_usb.c  |   6 +-
 drivers/net/wireless/marvell/mwifiex/cfg80211.c    |  14 +-
 drivers/net/wireless/mediatek/mt76/agg-rx.c        |   8 +-
 drivers/net/wireless/mediatek/mt76/mt76.h          |   6 +-
 drivers/net/wireless/realtek/rtlwifi/usb.c         |   8 +-
 drivers/net/wireless/realtek/rtw88/pci.c           |   1 +
 drivers/nvme/host/core.c                           |  16 +-
 drivers/nvme/host/pci.c                            |  57 +++---
 drivers/nvme/host/tcp.c                            |   4 +-
 drivers/pci/controller/vmd.c                       |   2 +
 drivers/pci/probe.c                                |  24 ++-
 drivers/pci/quirks.c                               |  48 ++++-
 drivers/perf/arm_smmuv3_pmu.c                      |   5 +-
 drivers/perf/hisilicon/hisi_uncore_hha_pmu.c       |   2 +-
 drivers/pinctrl/samsung/pinctrl-exynos.c           |  82 +++++---
 drivers/platform/x86/asus-wmi.c                    |   2 +
 drivers/platform/x86/dell-laptop.c                 |  11 +-
 drivers/platform/x86/hp-wmi.c                      |  10 +-
 drivers/platform/x86/intel-hid.c                   |   7 +
 drivers/platform/x86/intel-vbtn.c                  |  75 +++++--
 drivers/power/reset/vexpress-poweroff.c            |   1 +
 drivers/power/supply/power_supply_hwmon.c          |   4 +-
 drivers/regulator/qcom-rpmh-regulator.c            |   8 +-
 drivers/soc/tegra/Kconfig                          |   1 +
 drivers/spi/spi-dw-mid.c                           |  16 +-
 drivers/spi/spi-dw.c                               |   8 +-
 drivers/spi/spi-mem.c                              |  10 +-
 drivers/spi/spi-pxa2xx.c                           |   1 +
 drivers/spi/spi.c                                  |   1 +
 drivers/staging/android/ion/ion_heap.c             |   4 +-
 drivers/staging/greybus/sdio.c                     |  10 +-
 drivers/staging/media/imx/imx7-mipi-csis.c         |  82 ++++----
 drivers/staging/media/ipu3/ipu3-mmu.c              |  10 +-
 drivers/staging/media/ipu3/ipu3-v4l2.c             |  10 +
 drivers/staging/media/ipu3/ipu3.c                  |   5 +-
 drivers/staging/media/ipu3/ipu3.h                  |   4 +
 drivers/staging/media/sunxi/cedrus/cedrus_dec.c    |   2 +
 drivers/staging/media/sunxi/cedrus/cedrus_video.c  |   3 -
 drivers/tty/serial/8250/8250_core.c                |  14 +-
 drivers/tty/serial/8250/8250_pci.c                 |   6 -
 drivers/tty/serial/kgdboc.c                        | 126 +++++++++---
 drivers/w1/masters/omap_hdq.c                      |  10 +-
 fs/btrfs/block-group.c                             |   2 +-
 fs/btrfs/block-rsv.c                               |   3 +
 fs/btrfs/ctree.h                                   |   1 +
 fs/btrfs/file-item.c                               |   6 +-
 fs/btrfs/inode.c                                   |  81 +++++++-
 fs/btrfs/qgroup.c                                  |  14 ++
 fs/btrfs/send.c                                    |  67 ++++++
 fs/btrfs/space-info.c                              |  43 +++-
 fs/btrfs/space-info.h                              |   1 +
 fs/btrfs/transaction.c                             |  60 +++---
 fs/btrfs/transaction.h                             |   3 +-
 fs/btrfs/volumes.c                                 |  14 +-
 fs/ext4/ext4_extents.h                             |   9 +-
 fs/ext4/fsync.c                                    |  28 ++-
 fs/ext4/xattr.c                                    |   7 +-
 fs/f2fs/f2fs.h                                     |   1 +
 fs/f2fs/super.c                                    |  25 ++-
 fs/xfs/xfs_bmap_util.c                             |   2 +-
 fs/xfs/xfs_buf.c                                   |   8 +-
 fs/xfs/xfs_dquot.c                                 |   9 +-
 include/linux/kgdb.h                               |   2 +-
 include/linux/mmzone.h                             |   2 +
 include/linux/pci_ids.h                            |  11 +
 include/linux/sched/mm.h                           |   2 +
 include/linux/skmsg.h                              |   8 +
 include/linux/string.h                             |  60 ++++--
 include/linux/sunrpc/gss_api.h                     |   1 +
 include/linux/sunrpc/svcauth_gss.h                 |   3 +-
 include/net/tls.h                                  |   9 +
 include/uapi/linux/kvm.h                           |   2 +
 kernel/audit.c                                     |  52 +++--
 kernel/audit.h                                     |   2 +-
 kernel/auditfilter.c                               |  16 +-
 kernel/bpf/syscall.c                               |   3 +-
 kernel/cpu.c                                       |  18 +-
 kernel/cpu_pm.c                                    |   4 +-
 kernel/debug/debug_core.c                          |   5 +
 kernel/exit.c                                      |  25 ++-
 kernel/sched/core.c                                |  13 +-
 kernel/sched/fair.c                                |   4 +-
 kernel/sched/rt.c                                  |  12 +-
 kernel/sched/sched.h                               |   2 +
 lib/mpi/longlong.h                                 |   2 +-
 lib/test_kasan.c                                   |  29 ++-
 mm/huge_memory.c                                   |  31 ++-
 mm/page_alloc.c                                    |  27 +--
 net/batman-adv/bat_v_elp.c                         |  15 +-
 net/bluetooth/hci_event.c                          |   1 +
 net/core/skmsg.c                                   |  98 ++++++---
 net/netfilter/nft_nat.c                            |   4 +-
 net/sunrpc/auth_gss/gss_mech_switch.c              |  12 +-
 net/sunrpc/auth_gss/svcauth_gss.c                  |  18 +-
 net/tls/tls_sw.c                                   |  20 +-
 security/integrity/evm/evm_crypto.c                |   2 +-
 security/integrity/ima/ima.h                       |  10 +-
 security/integrity/ima/ima_crypto.c                |  53 ++++-
 security/integrity/ima/ima_init.c                  |  24 ++-
 security/integrity/ima/ima_main.c                  |   3 +
 security/integrity/ima/ima_policy.c                |  12 +-
 security/integrity/ima/ima_template_lib.c          |  18 ++
 security/lockdown/lockdown.c                       |   2 +-
 security/selinux/ss/policydb.c                     |   1 +
 tools/cgroup/iocost_monitor.py                     |  42 ++--
 tools/lib/api/fs/fs.c                              |  17 ++
 tools/lib/api/fs/fs.h                              |  12 ++
 tools/lib/bpf/hashmap.c                            |   7 +
 tools/lib/bpf/libbpf.c                             |   5 +-
 tools/objtool/check.c                              |   6 +
 tools/perf/builtin-probe.c                         |   3 +
 tools/perf/util/dso.c                              |  16 ++
 tools/perf/util/dso.h                              |   1 +
 tools/perf/util/probe-event.c                      |  46 +++--
 tools/perf/util/probe-finder.c                     |   1 +
 tools/perf/util/symbol.c                           |   4 +
 tools/testing/selftests/bpf/config                 |   1 +
 .../selftests/bpf/prog_tests/flow_dissector.c      |   1 +
 tools/testing/selftests/bpf/test_progs.c           |   1 +
 277 files changed, 2691 insertions(+), 1253 deletions(-)

[PATCH 5.4 001/261] ACPI: GED: use correct trigger type field in _Exx / _Lxx handling

[Greg Kroah-Hartman]

From: Ard Biesheuvel <ardb@kernel.org>

commit e5c399b0bd6490c12c0af2a9eaa9d7cd805d52c9 upstream.

Commit ea6f3af4c5e63f69 ("ACPI: GED: add support for _Exx / _Lxx handler
methods") added a reference to the 'triggering' field of either the
normal or the extended ACPI IRQ resource struct, but inadvertently used
the wrong pointer in the latter case. Note that both pointers refer to the
same union, and the 'triggering' field appears at the same offset in both
struct types, so it currently happens to work by accident. But let's fix
it nonetheless

Fixes: ea6f3af4c5e63f69 ("ACPI: GED: add support for _Exx / _Lxx handler methods")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/evged.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/acpi/evged.c
+++ b/drivers/acpi/evged.c
@@ -94,7 +94,7 @@ static acpi_status acpi_ged_request_inte
 		trigger = p->triggering;
 	} else {
 		gsi = pext->interrupts[0];
-		trigger = p->triggering;
+		trigger = pext->triggering;
 	}
 
 	irq = r.start;

[PATCH 5.4 002/261] drm/amdgpu: fix and cleanup amdgpu_gem_object_close v4

[Greg Kroah-Hartman]

From: Christian König <christian.koenig@amd.com>

[ Upstream commit 82c416b13cb7d22b96ec0888b296a48dff8a09eb ]

The problem is that we can't add the clear fence to the BO
when there is an exclusive fence on it since we can't
guarantee the the clear fence will complete after the
exclusive one.

To fix this refactor the function and also add the exclusive
fence as shared to the resv object.

v2: fix warning
v3: add excl fence as shared instead
v4: squash in fix for fence handling in amdgpu_gem_object_close

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c | 43 ++++++++++++++-----------
 1 file changed, 25 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
index 8ceb44925947..5fa5158d18ee 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
@@ -161,16 +161,17 @@ void amdgpu_gem_object_close(struct drm_gem_object *obj,
 
 	struct amdgpu_bo_list_entry vm_pd;
 	struct list_head list, duplicates;
+	struct dma_fence *fence = NULL;
 	struct ttm_validate_buffer tv;
 	struct ww_acquire_ctx ticket;
 	struct amdgpu_bo_va *bo_va;
-	int r;
+	long r;
 
 	INIT_LIST_HEAD(&list);
 	INIT_LIST_HEAD(&duplicates);
 
 	tv.bo = &bo->tbo;
-	tv.num_shared = 1;
+	tv.num_shared = 2;
 	list_add(&tv.head, &list);
 
 	amdgpu_vm_get_pd_bo(vm, &list, &vm_pd);
@@ -178,28 +179,34 @@ void amdgpu_gem_object_close(struct drm_gem_object *obj,
 	r = ttm_eu_reserve_buffers(&ticket, &list, false, &duplicates, false);
 	if (r) {
 		dev_err(adev->dev, "leaking bo va because "
-			"we fail to reserve bo (%d)\n", r);
+			"we fail to reserve bo (%ld)\n", r);
 		return;
 	}
 	bo_va = amdgpu_vm_bo_find(vm, bo);
-	if (bo_va && --bo_va->ref_count == 0) {
-		amdgpu_vm_bo_rmv(adev, bo_va);
-
-		if (amdgpu_vm_ready(vm)) {
-			struct dma_fence *fence = NULL;
+	if (!bo_va || --bo_va->ref_count)
+		goto out_unlock;
 
-			r = amdgpu_vm_clear_freed(adev, vm, &fence);
-			if (unlikely(r)) {
-				dev_err(adev->dev, "failed to clear page "
-					"tables on GEM object close (%d)\n", r);
-			}
+	amdgpu_vm_bo_rmv(adev, bo_va);
+	if (!amdgpu_vm_ready(vm))
+		goto out_unlock;
 
-			if (fence) {
-				amdgpu_bo_fence(bo, fence, true);
-				dma_fence_put(fence);
-			}
-		}
+	fence = dma_resv_get_excl(bo->tbo.base.resv);
+	if (fence) {
+		amdgpu_bo_fence(bo, fence, true);
+		fence = NULL;
 	}
+
+	r = amdgpu_vm_clear_freed(adev, vm, &fence);
+	if (r || !fence)
+		goto out_unlock;
+
+	amdgpu_bo_fence(bo, fence, true);
+	dma_fence_put(fence);
+
+out_unlock:
+	if (unlikely(r < 0))
+		dev_err(adev->dev, "failed to clear page "
+			"tables on GEM object close (%ld)\n", r);
 	ttm_eu_backoff_reservation(&ticket, &list);
 }
 
-- 
2.25.1

[PATCH 5.4 003/261] ath10k: Fix the race condition in firmware dump work queue

[Greg Kroah-Hartman]

From: Maharaja Kennadyrajan <mkenna@codeaurora.org>

[ Upstream commit 3d1c60460fb2823a19ead9e6ec8f184dd7271aa7 ]

There is a race condition, when the user writes 'hw-restart' and
'hard' in the simulate_fw_crash debugfs file without any delay.
In the above scenario, the firmware dump work queue(scheduled by
'hard') should be handled gracefully, while the target is in the
'hw-restart'.

Tested HW: QCA9984
Tested FW: 10.4-3.9.0.2-00044

Co-developed-by: Govindaraj Saminathan <gsamin@codeaurora.org>
Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org>
Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1585213077-28439-1-git-send-email-mkenna@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/pci.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 0a727502d14c..fd49d3419e79 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2074,6 +2074,7 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
 	ath10k_pci_irq_sync(ar);
 	napi_synchronize(&ar->napi);
 	napi_disable(&ar->napi);
+	cancel_work_sync(&ar_pci->dump_work);
 
 	/* Most likely the device has HTT Rx ring configured. The only way to
 	 * prevent the device from accessing (and possible corrupting) host
-- 
2.25.1

[PATCH 5.4 004/261] drm: bridge: adv7511: Extend list of audio sample rates

[Greg Kroah-Hartman]

From: Bogdan Togorean <bogdan.togorean@analog.com>

[ Upstream commit b97b6a1f6e14a25d1e1ca2a46c5fa3e2ca374e22 ]

ADV7511 support sample rates up to 192kHz. CTS and N parameters should
be computed accordingly so this commit extend the list up to maximum
supported sample rate.

Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200413113513.86091-2-bogdan.togorean@analog.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/adv7511/adv7511_audio.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
index a428185be2c1..d05b3033b510 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
@@ -19,13 +19,15 @@ static void adv7511_calc_cts_n(unsigned int f_tmds, unsigned int fs,
 {
 	switch (fs) {
 	case 32000:
-		*n = 4096;
+	case 48000:
+	case 96000:
+	case 192000:
+		*n = fs * 128 / 1000;
 		break;
 	case 44100:
-		*n = 6272;
-		break;
-	case 48000:
-		*n = 6144;
+	case 88200:
+	case 176400:
+		*n = fs * 128 / 900;
 		break;
 	}
 
-- 
2.25.1

[PATCH 5.4 005/261] media: staging: imgu: do not hold spinlock during freeing mmu page table

[Greg Kroah-Hartman]

From: Bingbu Cao <bingbu.cao@intel.com>

[ Upstream commit e1ebe9f9c88e5a78fcc4670a9063c9b3cd87dda4 ]

ImgU need set the mmu page table in memory as uncached, and set back
to write-back when free the page table by set_memory_wb(),
set_memory_wb() can not do flushing without interrupt, so the spinlock
should not be hold during ImgU page alloc and free, the interrupt
should be enabled during memory cache flush.

This patch release spinlock before freeing pages table.

Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/ipu3/ipu3-mmu.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/media/ipu3/ipu3-mmu.c b/drivers/staging/media/ipu3/ipu3-mmu.c
index 3d969b0522ab..abcf1f3e5f63 100644
--- a/drivers/staging/media/ipu3/ipu3-mmu.c
+++ b/drivers/staging/media/ipu3/ipu3-mmu.c
@@ -174,8 +174,10 @@ static u32 *imgu_mmu_get_l2pt(struct imgu_mmu *mmu, u32 l1pt_idx)
 	spin_lock_irqsave(&mmu->lock, flags);
 
 	l2pt = mmu->l2pts[l1pt_idx];
-	if (l2pt)
-		goto done;
+	if (l2pt) {
+		spin_unlock_irqrestore(&mmu->lock, flags);
+		return l2pt;
+	}
 
 	spin_unlock_irqrestore(&mmu->lock, flags);
 
@@ -190,8 +192,9 @@ static u32 *imgu_mmu_get_l2pt(struct imgu_mmu *mmu, u32 l1pt_idx)
 
 	l2pt = mmu->l2pts[l1pt_idx];
 	if (l2pt) {
+		spin_unlock_irqrestore(&mmu->lock, flags);
 		imgu_mmu_free_page_table(new_l2pt);
-		goto done;
+		return l2pt;
 	}
 
 	l2pt = new_l2pt;
@@ -200,7 +203,6 @@ static u32 *imgu_mmu_get_l2pt(struct imgu_mmu *mmu, u32 l1pt_idx)
 	pteval = IPU3_ADDR2PTE(virt_to_phys(new_l2pt));
 	mmu->l1pt[l1pt_idx] = pteval;
 
-done:
 	spin_unlock_irqrestore(&mmu->lock, flags);
 	return l2pt;
 }
-- 
2.25.1

[PATCH 5.4 006/261] media: imx: imx7-mipi-csis: Cleanup and fix subdev pad format handling

[Greg Kroah-Hartman]

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

[ Upstream commit d321dd233b9f2bb407b8e6b4759408f09ec207c3 ]

The subdev set pad format operation currently misbehaves in multiple ways:

- mipi_csis_try_format() unconditionally stores the format in the device
  state, even for V4L2_SUBDEV_FORMAT_TRY.

- The format is never stored in the pad cfg, but the pad cfg format
  always overwrites the format requested by the user.

- The sink format is not propagated to the source.

Fix all this by reworking the set format operation as follows:

1. For the source pad, turn set() into get() as the source format is not
   modifiable.
2. Validate the requested format and updated the stored format
   accordingly.
3. Return the format actually set.
4. Propagate the format from sink to source.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/imx/imx7-mipi-csis.c | 82 ++++++++++------------
 1 file changed, 37 insertions(+), 45 deletions(-)

diff --git a/drivers/staging/media/imx/imx7-mipi-csis.c b/drivers/staging/media/imx/imx7-mipi-csis.c
index 6f628195c4da..021bbd420390 100644
--- a/drivers/staging/media/imx/imx7-mipi-csis.c
+++ b/drivers/staging/media/imx/imx7-mipi-csis.c
@@ -657,28 +657,6 @@ static int mipi_csis_init_cfg(struct v4l2_subdev *mipi_sd,
 	return 0;
 }
 
-static struct csis_pix_format const *
-mipi_csis_try_format(struct v4l2_subdev *mipi_sd, struct v4l2_mbus_framefmt *mf)
-{
-	struct csi_state *state = mipi_sd_to_csis_state(mipi_sd);
-	struct csis_pix_format const *csis_fmt;
-
-	csis_fmt = find_csis_format(mf->code);
-	if (!csis_fmt)
-		csis_fmt = &mipi_csis_formats[0];
-
-	v4l_bound_align_image(&mf->width, 1, CSIS_MAX_PIX_WIDTH,
-			      csis_fmt->pix_width_alignment,
-			      &mf->height, 1, CSIS_MAX_PIX_HEIGHT, 1,
-			      0);
-
-	state->format_mbus.code = csis_fmt->code;
-	state->format_mbus.width = mf->width;
-	state->format_mbus.height = mf->height;
-
-	return csis_fmt;
-}
-
 static struct v4l2_mbus_framefmt *
 mipi_csis_get_format(struct csi_state *state,
 		     struct v4l2_subdev_pad_config *cfg,
@@ -691,53 +669,67 @@ mipi_csis_get_format(struct csi_state *state,
 	return &state->format_mbus;
 }
 
-static int mipi_csis_set_fmt(struct v4l2_subdev *mipi_sd,
+static int mipi_csis_get_fmt(struct v4l2_subdev *mipi_sd,
 			     struct v4l2_subdev_pad_config *cfg,
 			     struct v4l2_subdev_format *sdformat)
 {
 	struct csi_state *state = mipi_sd_to_csis_state(mipi_sd);
-	struct csis_pix_format const *csis_fmt;
 	struct v4l2_mbus_framefmt *fmt;
 
-	if (sdformat->pad >= CSIS_PADS_NUM)
-		return -EINVAL;
-
-	fmt = mipi_csis_get_format(state, cfg, sdformat->which, sdformat->pad);
-
 	mutex_lock(&state->lock);
-	if (sdformat->pad == CSIS_PAD_SOURCE) {
-		sdformat->format = *fmt;
-		goto unlock;
-	}
-
-	csis_fmt = mipi_csis_try_format(mipi_sd, &sdformat->format);
-
+	fmt = mipi_csis_get_format(state, cfg, sdformat->which, sdformat->pad);
 	sdformat->format = *fmt;
-
-	if (csis_fmt && sdformat->which == V4L2_SUBDEV_FORMAT_ACTIVE)
-		state->csis_fmt = csis_fmt;
-	else
-		cfg->try_fmt = sdformat->format;
-
-unlock:
 	mutex_unlock(&state->lock);
 
 	return 0;
 }
 
-static int mipi_csis_get_fmt(struct v4l2_subdev *mipi_sd,
+static int mipi_csis_set_fmt(struct v4l2_subdev *mipi_sd,
 			     struct v4l2_subdev_pad_config *cfg,
 			     struct v4l2_subdev_format *sdformat)
 {
 	struct csi_state *state = mipi_sd_to_csis_state(mipi_sd);
+	struct csis_pix_format const *csis_fmt;
 	struct v4l2_mbus_framefmt *fmt;
 
-	mutex_lock(&state->lock);
+	/*
+	 * The CSIS can't transcode in any way, the source format can't be
+	 * modified.
+	 */
+	if (sdformat->pad == CSIS_PAD_SOURCE)
+		return mipi_csis_get_fmt(mipi_sd, cfg, sdformat);
+
+	if (sdformat->pad != CSIS_PAD_SINK)
+		return -EINVAL;
 
 	fmt = mipi_csis_get_format(state, cfg, sdformat->which, sdformat->pad);
 
+	mutex_lock(&state->lock);
+
+	/* Validate the media bus code and clamp the size. */
+	csis_fmt = find_csis_format(sdformat->format.code);
+	if (!csis_fmt)
+		csis_fmt = &mipi_csis_formats[0];
+
+	fmt->code = csis_fmt->code;
+	fmt->width = sdformat->format.width;
+	fmt->height = sdformat->format.height;
+
+	v4l_bound_align_image(&fmt->width, 1, CSIS_MAX_PIX_WIDTH,
+			      csis_fmt->pix_width_alignment,
+			      &fmt->height, 1, CSIS_MAX_PIX_HEIGHT, 1, 0);
+
 	sdformat->format = *fmt;
 
+	/* Propagate the format from sink to source. */
+	fmt = mipi_csis_get_format(state, cfg, sdformat->which,
+				   CSIS_PAD_SOURCE);
+	*fmt = sdformat->format;
+
+	/* Store the CSIS format descriptor for active formats. */
+	if (sdformat->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+		state->csis_fmt = csis_fmt;
+
 	mutex_unlock(&state->lock);
 
 	return 0;
-- 
2.25.1

[PATCH 5.4 007/261] crypto: ccp -- dont "select" CONFIG_DMADEVICES

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit eebac678556d6927f09a992872f4464cf3aecc76 ]

DMADEVICES is the top-level option for the slave DMA
subsystem, and should not be selected by device drivers,
as this can cause circular dependencies such as:

drivers/net/ethernet/freescale/Kconfig:6:error: recursive dependency detected!
drivers/net/ethernet/freescale/Kconfig:6:	symbol NET_VENDOR_FREESCALE depends on PPC_BESTCOMM
drivers/dma/bestcomm/Kconfig:6:	symbol PPC_BESTCOMM depends on DMADEVICES
drivers/dma/Kconfig:6:	symbol DMADEVICES is selected by CRYPTO_DEV_SP_CCP
drivers/crypto/ccp/Kconfig:10:	symbol CRYPTO_DEV_SP_CCP depends on CRYPTO
crypto/Kconfig:16:	symbol CRYPTO is selected by LIBCRC32C
lib/Kconfig:222:	symbol LIBCRC32C is selected by LIQUIDIO
drivers/net/ethernet/cavium/Kconfig:65:	symbol LIQUIDIO depends on PTP_1588_CLOCK
drivers/ptp/Kconfig:8:	symbol PTP_1588_CLOCK is implied by FEC
drivers/net/ethernet/freescale/Kconfig:23:	symbol FEC depends on NET_VENDOR_FREESCALE

The LIQUIDIO driver causing this problem is addressed in a
separate patch, but this change is needed to prevent it from
happening again.

Using "depends on DMADEVICES" is what we do for all other
implementations of slave DMA controllers as well.

Fixes: b3c2fee5d66b ("crypto: ccp - Ensure all dependencies are specified")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/ccp/Kconfig | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/crypto/ccp/Kconfig b/drivers/crypto/ccp/Kconfig
index 8fec733f567f..63e227adbb13 100644
--- a/drivers/crypto/ccp/Kconfig
+++ b/drivers/crypto/ccp/Kconfig
@@ -10,10 +10,9 @@ config CRYPTO_DEV_CCP_DD
 config CRYPTO_DEV_SP_CCP
 	bool "Cryptographic Coprocessor device"
 	default y
-	depends on CRYPTO_DEV_CCP_DD
+	depends on CRYPTO_DEV_CCP_DD && DMADEVICES
 	select HW_RANDOM
 	select DMA_ENGINE
-	select DMADEVICES
 	select CRYPTO_SHA1
 	select CRYPTO_SHA256
 	help
-- 
2.25.1

[PATCH 5.4 008/261] media: vicodec: Fix error codes in probe function

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit f36592e7b343d853edf44d3545bb68961c0949a4 ]

If these functions fail then we return success, but we should instead
preserve negative error code and return that.

Fixes: fde649b418d1 ("media: vicodec: Register another node for stateless decoder")
Fixes: c022a4a95722 ("media: vicodec: add struct for encoder/decoder instance")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/vicodec/vicodec-core.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/media/platform/vicodec/vicodec-core.c b/drivers/media/platform/vicodec/vicodec-core.c
index 82350097503e..84ec36156f73 100644
--- a/drivers/media/platform/vicodec/vicodec-core.c
+++ b/drivers/media/platform/vicodec/vicodec-core.c
@@ -2172,16 +2172,19 @@ static int vicodec_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, dev);
 
-	if (register_instance(dev, &dev->stateful_enc,
-			      "stateful-encoder", true))
+	ret = register_instance(dev, &dev->stateful_enc, "stateful-encoder",
+				true);
+	if (ret)
 		goto unreg_dev;
 
-	if (register_instance(dev, &dev->stateful_dec,
-			      "stateful-decoder", false))
+	ret = register_instance(dev, &dev->stateful_dec, "stateful-decoder",
+				false);
+	if (ret)
 		goto unreg_sf_enc;
 
-	if (register_instance(dev, &dev->stateless_dec,
-			      "stateless-decoder", false))
+	ret = register_instance(dev, &dev->stateless_dec, "stateless-decoder",
+				false);
+	if (ret)
 		goto unreg_sf_dec;
 
 #ifdef CONFIG_MEDIA_CONTROLLER
-- 
2.25.1

[PATCH 5.4 009/261] media: si2157: Better check for running tuner in init

[Greg Kroah-Hartman]

From: Brad Love <brad@nextdimension.cc>

[ Upstream commit e955f959ac52e145f27ff2be9078b646d0352af0 ]

Getting the Xtal trim property to check if running is less error prone.
Reset if_frequency if state is unknown.

Replaces the previous "garbage check".

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/tuners/si2157.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/media/tuners/si2157.c b/drivers/media/tuners/si2157.c
index e87040d6eca7..a39e1966816b 100644
--- a/drivers/media/tuners/si2157.c
+++ b/drivers/media/tuners/si2157.c
@@ -75,24 +75,23 @@ static int si2157_init(struct dvb_frontend *fe)
 	struct si2157_cmd cmd;
 	const struct firmware *fw;
 	const char *fw_name;
-	unsigned int uitmp, chip_id;
+	unsigned int chip_id, xtal_trim;
 
 	dev_dbg(&client->dev, "\n");
 
-	/* Returned IF frequency is garbage when firmware is not running */
-	memcpy(cmd.args, "\x15\x00\x06\x07", 4);
+	/* Try to get Xtal trim property, to verify tuner still running */
+	memcpy(cmd.args, "\x15\x00\x04\x02", 4);
 	cmd.wlen = 4;
 	cmd.rlen = 4;
 	ret = si2157_cmd_execute(client, &cmd);
-	if (ret)
-		goto err;
 
-	uitmp = cmd.args[2] << 0 | cmd.args[3] << 8;
-	dev_dbg(&client->dev, "if_frequency kHz=%u\n", uitmp);
+	xtal_trim = cmd.args[2] | (cmd.args[3] << 8);
 
-	if (uitmp == dev->if_frequency / 1000)
+	if (ret == 0 && xtal_trim < 16)
 		goto warm;
 
+	dev->if_frequency = 0; /* we no longer know current tuner state */
+
 	/* power up */
 	if (dev->chiptype == SI2157_CHIPTYPE_SI2146) {
 		memcpy(cmd.args, "\xc0\x05\x01\x00\x00\x0b\x00\x00\x01", 9);
-- 
2.25.1

[PATCH 5.4 010/261] objtool: Ignore empty alternatives

[Greg Kroah-Hartman]

From: Julien Thierry <jthierry@redhat.com>

[ Upstream commit 7170cf47d16f1ba29eca07fd818870b7af0a93a5 ]

The .alternatives section can contain entries with no original
instructions. Objtool will currently crash when handling such an entry.

Just skip that entry, but still give a warning to discourage useless
entries.

Signed-off-by: Julien Thierry <jthierry@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/objtool/check.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index fcc6cd404f56..48b234d8f251 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -865,6 +865,12 @@ static int add_special_section_alts(struct objtool_file *file)
 		}
 
 		if (special_alt->group) {
+			if (!special_alt->orig_len) {
+				WARN_FUNC("empty alternative entry",
+					  orig_insn->sec, orig_insn->offset);
+				continue;
+			}
+
 			ret = handle_group_alt(file, special_alt, orig_insn,
 					       &new_insn);
 			if (ret)
-- 
2.25.1

[PATCH 5.4 011/261] spi: spi-mem: Fix Dual/Quad modes on Octal-capable devices

[Greg Kroah-Hartman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 80300a7d5f2d7178335652f41d2e55ba898b4ec1 ]

Currently buswidths 2 and 4 are rejected for a device that advertises
Octal capabilities.  Allow these buswidths, just like is done for
buswidth 2 and Quad-capable devices.

Fixes: b12a084c8729ef42 ("spi: spi-mem: add support for octal mode I/O data transfer")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200416101418.14379-1-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-mem.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index 9f0fa9f3116d..de0ba3e5449f 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -108,15 +108,17 @@ static int spi_check_buswidth_req(struct spi_mem *mem, u8 buswidth, bool tx)
 		return 0;
 
 	case 2:
-		if ((tx && (mode & (SPI_TX_DUAL | SPI_TX_QUAD))) ||
-		    (!tx && (mode & (SPI_RX_DUAL | SPI_RX_QUAD))))
+		if ((tx &&
+		     (mode & (SPI_TX_DUAL | SPI_TX_QUAD | SPI_TX_OCTAL))) ||
+		    (!tx &&
+		     (mode & (SPI_RX_DUAL | SPI_RX_QUAD | SPI_RX_OCTAL))))
 			return 0;
 
 		break;
 
 	case 4:
-		if ((tx && (mode & SPI_TX_QUAD)) ||
-		    (!tx && (mode & SPI_RX_QUAD)))
+		if ((tx && (mode & (SPI_TX_QUAD | SPI_TX_OCTAL))) ||
+		    (!tx && (mode & (SPI_RX_QUAD | SPI_RX_OCTAL))))
 			return 0;
 
 		break;
-- 
2.25.1

[PATCH 5.4 012/261] drm/amdgpu: Init data to avoid oops while reading pp_num_states.

[Greg Kroah-Hartman]

From: limingyu <limingyu@uniontech.com>

[ Upstream commit 6f81b2d047c59eb77cd04795a44245d6a52cdaec ]

For chip like CHIP_OLAND with si enabled(amdgpu.si_support=1),
the amdgpu will expose pp_num_states to the /sys directory.
In this moment, read the pp_num_states file will excute the
amdgpu_get_pp_num_states func. In our case, the data hasn't
been initialized, so the kernel will access some ilegal
address, trigger the segmentfault and system will reboot soon:

    uos@uos-PC:~$ cat /sys/devices/pci0000\:00/0000\:00\:00.0/0000\:01\:00
    .0/pp_num_states

    Message from syslogd@uos-PC at Apr 22 09:26:20 ...
     kernel:[   82.154129] Internal error: Oops: 96000004 [#1] SMP

This patch aims to fix this problem, avoid that reading file
triggers the kernel sementfault.

Signed-off-by: limingyu <limingyu@uniontech.com>
Signed-off-by: zhoubinbin <zhoubinbin@uniontech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
index 51263b8d94b1..c8008b956363 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
@@ -416,8 +416,11 @@ static ssize_t amdgpu_get_pp_num_states(struct device *dev,
 		ret = smu_get_power_num_states(&adev->smu, &data);
 		if (ret)
 			return ret;
-	} else if (adev->powerplay.pp_funcs->get_pp_num_states)
+	} else if (adev->powerplay.pp_funcs->get_pp_num_states) {
 		amdgpu_dpm_get_pp_num_states(adev, &data);
+	} else {
+		memset(&data, 0, sizeof(data));
+	}
 
 	buf_len = snprintf(buf, PAGE_SIZE, "states: %d\n", data.nums);
 	for (i = 0; i < data.nums; i++)
-- 
2.25.1

[PATCH 5.4 013/261] arm64/kernel: Fix range on invalidating dcache for boot page tables

[Greg Kroah-Hartman]

From: Gavin Shan <gshan@redhat.com>

[ Upstream commit 9d2d75ede59bc1edd8561f2ee9d4702a5ea0ae30 ]

Prior to commit 8eb7e28d4c642c31 ("arm64/mm: move runtime pgds to
rodata"), idmap_pgd_dir, tramp_pg_dir, reserved_ttbr0, swapper_pg_dir,
and init_pg_dir were contiguous at the end of the kernel image. The
maintenance at the end of __create_page_tables assumed these were
contiguous, and affected everything from the start of idmap_pg_dir
to the end of init_pg_dir.

That commit moved all but init_pg_dir into the .rodata section, with
other data placed between idmap_pg_dir and init_pg_dir, but did not
update the maintenance. Hence the maintenance is performed on much
more data than necessary (but as the bootloader previously made this
clean to the PoC there is no functional problem).

As we only alter idmap_pg_dir, and init_pg_dir, we only need to perform
maintenance for these. As the other dirs are in .rodata, the bootloader
will have initialised them as expected and cleaned them to the PoC. The
kernel will initialize them as necessary after enabling the MMU.

This patch reworks the maintenance to only cover the idmap_pg_dir and
init_pg_dir to avoid this unnecessary work.

Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200427235700.112220-1-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/pgtable.h |  1 +
 arch/arm64/kernel/head.S         | 12 +++++++++---
 arch/arm64/kernel/vmlinux.lds.S  |  1 +
 3 files changed, 11 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index 13ebe2bad79f..41dd4b1f0ccb 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -456,6 +456,7 @@ extern pgd_t init_pg_dir[PTRS_PER_PGD];
 extern pgd_t init_pg_end[];
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 extern pgd_t idmap_pg_dir[PTRS_PER_PGD];
+extern pgd_t idmap_pg_end[];
 extern pgd_t tramp_pg_dir[PTRS_PER_PGD];
 
 extern void set_swapper_pgd(pgd_t *pgdp, pgd_t pgd);
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 989b1944cb71..bdb5ec341900 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -393,13 +393,19 @@ __create_page_tables:
 
 	/*
 	 * Since the page tables have been populated with non-cacheable
-	 * accesses (MMU disabled), invalidate the idmap and swapper page
-	 * tables again to remove any speculatively loaded cache lines.
+	 * accesses (MMU disabled), invalidate those tables again to
+	 * remove any speculatively loaded cache lines.
 	 */
+	dmb	sy
+
 	adrp	x0, idmap_pg_dir
+	adrp	x1, idmap_pg_end
+	sub	x1, x1, x0
+	bl	__inval_dcache_area
+
+	adrp	x0, init_pg_dir
 	adrp	x1, init_pg_end
 	sub	x1, x1, x0
-	dmb	sy
 	bl	__inval_dcache_area
 
 	ret	x28
diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S
index aa76f7259668..e1af25dbc57e 100644
--- a/arch/arm64/kernel/vmlinux.lds.S
+++ b/arch/arm64/kernel/vmlinux.lds.S
@@ -142,6 +142,7 @@ SECTIONS
 	. = ALIGN(PAGE_SIZE);
 	idmap_pg_dir = .;
 	. += IDMAP_DIR_SIZE;
+	idmap_pg_end = .;
 
 #ifdef CONFIG_UNMAP_KERNEL_AT_EL0
 	tramp_pg_dir = .;
-- 
2.25.1

[PATCH 5.4 014/261] libbpf: Fix memory leak and possible double-free in hashmap__clear

[Greg Kroah-Hartman]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit 229bf8bf4d910510bc1a2fd0b89bd467cd71050d ]

Fix memory leak in hashmap_clear() not freeing hashmap_entry structs for each
of the remaining entries. Also NULL-out bucket list to prevent possible
double-free between hashmap__clear() and hashmap__free().

Running test_progs-asan flavor clearly showed this problem.

Reported-by: Alston Tang <alston64@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429012111.277390-5-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/hashmap.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/tools/lib/bpf/hashmap.c b/tools/lib/bpf/hashmap.c
index 6122272943e6..9ef9f6201d8b 100644
--- a/tools/lib/bpf/hashmap.c
+++ b/tools/lib/bpf/hashmap.c
@@ -56,7 +56,14 @@ struct hashmap *hashmap__new(hashmap_hash_fn hash_fn,
 
 void hashmap__clear(struct hashmap *map)
 {
+	struct hashmap_entry *cur, *tmp;
+	int bkt;
+
+	hashmap__for_each_entry_safe(map, cur, tmp, bkt) {
+		free(cur);
+	}
 	free(map->buckets);
+	map->buckets = NULL;
 	map->cap = map->cap_bits = map->sz = 0;
 }
 
-- 
2.25.1

[PATCH 5.4 015/261] spi: pxa2xx: Apply CS clk quirk to BXT

[Greg Kroah-Hartman]

From: Evan Green <evgreen@chromium.org>

[ Upstream commit 6eefaee4f2d366a389da0eb95e524ba82bf358c4 ]

With a couple allies at Intel, and much badgering, I got confirmation
from Intel that at least BXT suffers from the same SPI chip-select
issue as Cannonlake (and beyond). The issue being that after going
through runtime suspend/resume, toggling the chip-select line without
also sending data does nothing.

Add the quirk to BXT to briefly toggle dynamic clock gating off and
on, forcing the fabric to wake up enough to notice the CS register
change.

Signed-off-by: Evan Green <evgreen@chromium.org>
Cc: Shobhit Srivastava <shobhit.srivastava@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200427163238.1.Ib1faaabe236e37ea73be9b8dcc6aa034cb3c8804@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-pxa2xx.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index d0d6f1bda1b6..7f4285e2ae68 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -148,6 +148,7 @@ static const struct lpss_config lpss_platforms[] = {
 		.tx_threshold_hi = 48,
 		.cs_sel_shift = 8,
 		.cs_sel_mask = 3 << 8,
+		.cs_clk_stays_gated = true,
 	},
 	{	/* LPSS_CNL_SSP */
 		.offset = 0x200,
-- 
2.25.1

[PATCH 5.4 016/261] x86,smap: Fix smap_{save,restore}() alternatives

[Greg Kroah-Hartman]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit 1ff865e343c2b59469d7e41d370a980a3f972c71 ]

As reported by objtool:

  lib/ubsan.o: warning: objtool: .altinstr_replacement+0x0: alternative modifies stack
  lib/ubsan.o: warning: objtool: .altinstr_replacement+0x7: alternative modifies stack

the smap_{save,restore}() alternatives violate (the newly enforced)
rule on stack invariance. That is, due to there only being a single
ORC table it must be valid to any alternative. These alternatives
violate this with the direct result that unwinds will not be correct
when it hits between the PUSH and POP instructions.

Rewrite the functions to only have a conditional jump.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200429101802.GI13592@hirez.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/smap.h | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/x86/include/asm/smap.h b/arch/x86/include/asm/smap.h
index 27c47d183f4b..8b58d6975d5d 100644
--- a/arch/x86/include/asm/smap.h
+++ b/arch/x86/include/asm/smap.h
@@ -57,8 +57,10 @@ static __always_inline unsigned long smap_save(void)
 {
 	unsigned long flags;
 
-	asm volatile (ALTERNATIVE("", "pushf; pop %0; " __ASM_CLAC,
-				  X86_FEATURE_SMAP)
+	asm volatile ("# smap_save\n\t"
+		      ALTERNATIVE("jmp 1f", "", X86_FEATURE_SMAP)
+		      "pushf; pop %0; " __ASM_CLAC "\n\t"
+		      "1:"
 		      : "=rm" (flags) : : "memory", "cc");
 
 	return flags;
@@ -66,7 +68,10 @@ static __always_inline unsigned long smap_save(void)
 
 static __always_inline void smap_restore(unsigned long flags)
 {
-	asm volatile (ALTERNATIVE("", "push %0; popf", X86_FEATURE_SMAP)
+	asm volatile ("# smap_restore\n\t"
+		      ALTERNATIVE("jmp 1f", "", X86_FEATURE_SMAP)
+		      "push %0; popf\n\t"
+		      "1:"
 		      : : "g" (flags) : "memory", "cc");
 }
 
-- 
2.25.1

[PATCH 5.4 017/261] sched/fair: Refill bandwidth before scaling

[Greg Kroah-Hartman]

From: Huaixin Chang <changhuaixin@linux.alibaba.com>

[ Upstream commit 5a6d6a6ccb5f48ca8cf7c6d64ff83fd9c7999390 ]

In order to prevent possible hardlockup of sched_cfs_period_timer()
loop, loop count is introduced to denote whether to scale quota and
period or not. However, scale is done between forwarding period timer
and refilling cfs bandwidth runtime, which means that period timer is
forwarded with old "period" while runtime is refilled with scaled
"quota".

Move do_sched_cfs_period_timer() before scaling to solve this.

Fixes: 2e8e19226398 ("sched/fair: Limit sched_cfs_period_timer() loop to avoid hard lockup")
Signed-off-by: Huaixin Chang <changhuaixin@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Reviewed-by: Phil Auld <pauld@redhat.com>
Link: https://lkml.kernel.org/r/20200420024421.22442-3-changhuaixin@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/fair.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 8a0e6bdba50d..2f81e4ae844e 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -4942,6 +4942,8 @@ static enum hrtimer_restart sched_cfs_period_timer(struct hrtimer *timer)
 		if (!overrun)
 			break;
 
+		idle = do_sched_cfs_period_timer(cfs_b, overrun, flags);
+
 		if (++count > 3) {
 			u64 new, old = ktime_to_ns(cfs_b->period);
 
@@ -4971,8 +4973,6 @@ static enum hrtimer_restart sched_cfs_period_timer(struct hrtimer *timer)
 			/* reset count so we don't come right back in here */
 			count = 0;
 		}
-
-		idle = do_sched_cfs_period_timer(cfs_b, overrun, flags);
 	}
 	if (idle)
 		cfs_b->period_active = 0;
-- 
2.25.1

[PATCH 5.4 018/261] net: atlantic: make hw_get_regs optional

[Greg Kroah-Hartman]

From: Mark Starovoytov <mstarovoitov@marvell.com>

[ Upstream commit d0f23741c202c685447050713907f3be39a985ee ]

This patch fixes potential crash in case if hw_get_regs is NULL.

Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
index 12949f1ec1ea..145334fb18f4 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
@@ -690,6 +690,9 @@ int aq_nic_get_regs(struct aq_nic_s *self, struct ethtool_regs *regs, void *p)
 	u32 *regs_buff = p;
 	int err = 0;
 
+	if (unlikely(!self->aq_hw_ops->hw_get_regs))
+		return -EOPNOTSUPP;
+
 	regs->version = 1;
 
 	err = self->aq_hw_ops->hw_get_regs(self->aq_hw,
@@ -704,6 +707,9 @@ err_exit:
 
 int aq_nic_get_regs_count(struct aq_nic_s *self)
 {
+	if (unlikely(!self->aq_hw_ops->hw_get_regs))
+		return 0;
+
 	return self->aq_nic_cfg.aq_hw_caps->mac_regs_count;
 }
 
-- 
2.25.1

[PATCH 5.4 019/261] net: ena: fix error returning in ena_com_get_hash_function()

[Greg Kroah-Hartman]

From: Arthur Kiyanovski <akiyano@amazon.com>

[ Upstream commit e9a1de378dd46375f9abfd8de1e6f59ee114a793 ]

In case the "func" parameter is NULL we now return "-EINVAL".
This shouldn't happen in general, but when it does happen, this is the
proper way to handle it.

We also check func for NULL in the beginning of the function, as there
is no reason to do all the work and realize in the end of the function
it was useless.

Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amazon/ena/ena_com.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c b/drivers/net/ethernet/amazon/ena/ena_com.c
index 48de4bee209e..9225733f4fec 100644
--- a/drivers/net/ethernet/amazon/ena/ena_com.c
+++ b/drivers/net/ethernet/amazon/ena/ena_com.c
@@ -2349,6 +2349,9 @@ int ena_com_get_hash_function(struct ena_com_dev *ena_dev,
 		rss->hash_key;
 	int rc;
 
+	if (unlikely(!func))
+		return -EINVAL;
+
 	rc = ena_com_get_feature_ex(ena_dev, &get_resp,
 				    ENA_ADMIN_RSS_HASH_FUNCTION,
 				    rss->hash_key_dma_addr,
@@ -2361,8 +2364,7 @@ int ena_com_get_hash_function(struct ena_com_dev *ena_dev,
 	if (rss->hash_func)
 		rss->hash_func--;
 
-	if (func)
-		*func = rss->hash_func;
+	*func = rss->hash_func;
 
 	if (key)
 		memcpy(key, hash_key->key, (size_t)(hash_key->keys_num) << 2);
-- 
2.25.1

[PATCH 5.4 020/261] efi/libstub/x86: Work around LLVM ELF quirk build regression

[Greg Kroah-Hartman]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit f77767ed5f4d398b29119563155e4ece2dfeee13 ]

When building the x86 EFI stub with Clang, the libstub Makefile rules
that manipulate the ELF object files may throw an error like:

    STUBCPY drivers/firmware/efi/libstub/efi-stub-helper.stub.o
  strip: drivers/firmware/efi/libstub/efi-stub-helper.stub.o: Failed to find link section for section 10
  objcopy: drivers/firmware/efi/libstub/efi-stub-helper.stub.o: Failed to find link section for section 10

This is the result of a LLVM feature [0] where symbol references are
stored in a LLVM specific .llvm_addrsig section in a non-transparent way,
causing generic ELF tools such as strip or objcopy to choke on them.

So force the compiler not to emit these sections, by passing the
appropriate command line option.

[0] https://sourceware.org/bugzilla/show_bug.cgi?id=23817

Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/libstub/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile
index ee0661ddb25b..8c5b5529dbc0 100644
--- a/drivers/firmware/efi/libstub/Makefile
+++ b/drivers/firmware/efi/libstub/Makefile
@@ -28,6 +28,7 @@ KBUILD_CFLAGS			:= $(cflags-y) -DDISABLE_BRANCH_PROFILING \
 				   -D__NO_FORTIFY \
 				   $(call cc-option,-ffreestanding) \
 				   $(call cc-option,-fno-stack-protector) \
+				   $(call cc-option,-fno-addrsig) \
 				   -D__DISABLE_EXPORTS
 
 GCOV_PROFILE			:= n
-- 
2.25.1

[PATCH 5.4 021/261] ath10k: remove the max_sched_scan_reqs value

[Greg Kroah-Hartman]

From: Wen Gong <wgong@codeaurora.org>

[ Upstream commit d431f8939c1419854dfe89dd345387f5397c6edd ]

The struct cfg80211_wowlan of NET_DETECT WoWLAN feature share the same
struct cfg80211_sched_scan_request together with scheduled scan request
feature, and max_sched_scan_reqs of wiphy is only used for sched scan,
and ath10k does not support scheduled scan request feature, so ath10k
does not set flag NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR, but ath10k
set max_sched_scan_reqs of wiphy to a non zero value 1, then function
nl80211_add_commands_unsplit of cfg80211 will set it support command
NL80211_CMD_START_SCHED_SCAN because max_sched_scan_reqs is a non zero
value, but actually ath10k not support it, then it leads a mismatch result
for sched scan of cfg80211, then application shill found the mismatch and
stop running case of MAC random address scan and then the case fail.

After remove max_sched_scan_reqs value, it keeps match for sched scan and
case of MAC random address scan pass.

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029.
Tested with QCA6174 PCIe with firmware WLAN.RM.4.4.1-00110-QCARMSWP-1.

Fixes: ce834e280f2f875 ("ath10k: support NET_DETECT WoWLAN feature")
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20191114050001.4658-1-wgong@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 36d24ea126a2..b0f6f2727053 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -8811,7 +8811,6 @@ int ath10k_mac_register(struct ath10k *ar)
 	ar->hw->wiphy->max_scan_ie_len = WLAN_SCAN_PARAMS_MAX_IE_LEN;
 
 	if (test_bit(WMI_SERVICE_NLO, ar->wmi.svc_map)) {
-		ar->hw->wiphy->max_sched_scan_reqs = 1;
 		ar->hw->wiphy->max_sched_scan_ssids = WMI_PNO_MAX_SUPP_NETWORKS;
 		ar->hw->wiphy->max_match_sets = WMI_PNO_MAX_SUPP_NETWORKS;
 		ar->hw->wiphy->max_sched_scan_ie_len = WMI_PNO_MAX_IE_LENGTH;
-- 
2.25.1

[PATCH 5.4 022/261] arm64: cacheflush: Fix KGDB trap detection

[Greg Kroah-Hartman]

From: Daniel Thompson <daniel.thompson@linaro.org>

[ Upstream commit ab8ad279ceac4fc78ae4dcf1a26326e05695e537 ]

flush_icache_range() contains a bodge to avoid issuing IPIs when the kgdb
trap handler is running because issuing IPIs is unsafe (and not needed)
in this execution context. However the current test, based on
kgdb_connected is flawed: it both over-matches and under-matches.

The over match occurs because kgdb_connected is set when gdb attaches
to the stub and remains set during normal running. This is relatively
harmelss because in almost all cases irq_disabled() will be false.

The under match is more serious. When kdb is used instead of kgdb to access
the debugger then kgdb_connected is not set in all the places that the
debug core updates sw breakpoints (and hence flushes the icache). This
can lead to deadlock.

Fix by replacing the ad-hoc check with the proper kgdb macro. This also
allows us to drop the #ifdef wrapper.

Fixes: 3b8c9f1cdfc5 ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200504170518.2959478-1-daniel.thompson@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/cacheflush.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h
index 665c78e0665a..3e7dda6f1ab1 100644
--- a/arch/arm64/include/asm/cacheflush.h
+++ b/arch/arm64/include/asm/cacheflush.h
@@ -79,7 +79,7 @@ static inline void flush_icache_range(unsigned long start, unsigned long end)
 	 * IPI all online CPUs so that they undergo a context synchronization
 	 * event and are forced to refetch the new instructions.
 	 */
-#ifdef CONFIG_KGDB
+
 	/*
 	 * KGDB performs cache maintenance with interrupts disabled, so we
 	 * will deadlock trying to IPI the secondary CPUs. In theory, we can
@@ -89,9 +89,9 @@ static inline void flush_icache_range(unsigned long start, unsigned long end)
 	 * the patching operation, so we don't need extra IPIs here anyway.
 	 * In which case, add a KGDB-specific bodge and return early.
 	 */
-	if (kgdb_connected && irqs_disabled())
+	if (in_dbg_master())
 		return;
-#endif
+
 	kick_all_cpus_sync();
 }
 
-- 
2.25.1

[PATCH 5.4 023/261] media: staging: ipu3: Fix stale list entries on parameter queue failure

[Greg Kroah-Hartman]

From: Tomasz Figa <tfiga@chromium.org>

[ Upstream commit 735a02f1bbc2c5e6e9cdbf0222948ff03ff7ab2d ]

When queuing parameters fails, current code bails out without deleting
the corresponding vb2 buffer from the driver buffer list, but the buffer
is returned to vb2. This leads to stale list entries and a crash when
the driver stops streaming:

[  224.935561] ipu3-imgu 0000:00:05.0: set parameters failed.
[  224.998932] ipu3-imgu 0000:00:05.0: set parameters failed.
[  225.064430] ipu3-imgu 0000:00:05.0: set parameters failed.
[  225.128534] ipu3-imgu 0000:00:05.0: set parameters failed.
[  225.194945] ipu3-imgu 0000:00:05.0: set parameters failed.
[  225.360363] ------------[ cut here ]------------
[  225.360372] WARNING: CPU: 0 PID: 6704 at
drivers/media/common/videobuf2/videobuf2-core.c:927
vb2_buffer_done+0x20f/0x21a [videobuf2_common]
[  225.360374] Modules linked in: snd_seq_dummy snd_seq snd_seq_device
veth bridge stp llc tun nf_nat_tftp nf_conntrack_tftp nf_nat_ftp
nf_conntrack_ftp esp6 ah6 ip6t_REJECT ip6t_ipv6header cmac rfcomm uinput
ipu3_imgu(C) ipu3_cio2 iova videobuf2_v4l2 videobuf2_common
videobuf2_dma_sg videobuf2_memops ov13858 ov5670 v4l2_fwnode dw9714
acpi_als xt_MASQUERADE fuse iio_trig_sysfs cros_ec_sensors_ring
cros_ec_light_prox cros_ec_sensors cros_ec_sensors_core
industrialio_triggered_buffer kfifo_buf industrialio
cros_ec_sensorsupport cdc_ether btusb btrtl btintel btbcm usbnet
bluetooth ecdh_generic ecc hid_google_hammer iwlmvm iwl7000_mac80211
r8152 mii lzo_rle lzo_compress iwlwifi zram cfg80211 joydev
[  225.360400] CPU: 0 PID: 6704 Comm: CameraDeviceOps Tainted: G
C        5.4.30 #5
[  225.360402] Hardware name: HP Soraka/Soraka, BIOS
Google_Soraka.10431.106.0 12/03/2019
[  225.360405] RIP: 0010:vb2_buffer_done+0x20f/0x21a [videobuf2_common]
[  225.360408] Code: 5e 41 5f 5d e9 e0 16 5a d4 41 8b 55 08 48 c7 c7 8f
8b 5c c0 48 c7 c6 36 9a 5c c0 44 89 f9 31 c0 e8 a5 1c 5b d4 e9 53 fe ff
ff <0f> 0b eb a3 e8 12 d7 43 d4 eb 97 0f 1f 44 00 00 55 48 89 e5 41 56
[  225.360410] RSP: 0018:ffff9468ab32fba8 EFLAGS: 00010297
[  225.360412] RAX: ffff8aa7a51577a8 RBX: dead000000000122 RCX:
ffff8aa7a51577a8
[  225.360414] RDX: 0000000000000000 RSI: 0000000000000006 RDI:
ffff8aa7a5157400
[  225.360416] RBP: ffff9468ab32fbd8 R08: ffff8aa64e47e600 R09:
0000000000000000
[  225.360418] R10: 0000000000000000 R11: ffffffffc06036e6 R12:
dead000000000100
[  225.360420] R13: ffff8aa7820f1940 R14: ffff8aa7a51577a8 R15:
0000000000000006
[  225.360422] FS:  00007c1146ffd700(0000) GS:ffff8aa7baa00000(0000)
knlGS:0000000000000000
[  225.360424] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  225.360426] CR2: 00007aea3473a000 CR3: 00000000537d6004 CR4:
00000000003606f0
[  225.360427] Call Trace:
[  225.360434]  imgu_return_all_buffers+0x6f/0x8e [ipu3_imgu]
[  225.360438]  imgu_vb2_stop_streaming+0xd6/0xf0 [ipu3_imgu]
[  225.360441]  __vb2_queue_cancel+0x33/0x22d [videobuf2_common]
[  225.360443]  vb2_core_streamoff+0x16/0x78 [videobuf2_common]
[  225.360448]  __video_do_ioctl+0x33d/0x42a
[  225.360452]  video_usercopy+0x34a/0x615
[  225.360455]  ? video_ioctl2+0x16/0x16
[  225.360458]  v4l2_ioctl+0x46/0x53
[  225.360462]  do_vfs_ioctl+0x50a/0x787
[  225.360465]  ksys_ioctl+0x58/0x83
[  225.360468]  __x64_sys_ioctl+0x1a/0x1e
[  225.360470]  do_syscall_64+0x54/0x68
[  225.360474]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  225.360476] RIP: 0033:0x7c118030f497
[  225.360479] Code: 8a 66 90 48 8b 05 d1 d9 2b 00 64 c7 00 26 00 00 00
48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 d9 2b 00 f7 d8 64 89 01 48
[  225.360480] RSP: 002b:00007c1146ffa5a8 EFLAGS: 00000246 ORIG_RAX:
0000000000000010
[  225.360483] RAX: ffffffffffffffda RBX: 00007c1140010018 RCX:
00007c118030f497
[  225.360484] RDX: 00007c114001019c RSI: 0000000040045613 RDI:
000000000000004c
[  225.360486] RBP: 00007c1146ffa700 R08: 00007c1140010048 R09:
0000000000000000
[  225.360488] R10: 0000000000000000 R11: 0000000000000246 R12:
00007c11400101b0
[  225.360489] R13: 00007c1140010200 R14: 00007c1140010048 R15:
0000000000000001
[  225.360492] ---[ end trace 73625ecfbd1c930e ]---
[  225.360498] general protection fault: 0000 [#1] PREEMPT SMP PTI
[  225.360501] CPU: 0 PID: 6704 Comm: CameraDeviceOps Tainted: G
WC        5.4.30 #5
[  225.360502] Hardware name: HP Soraka/Soraka, BIOS
Google_Soraka.10431.106.0 12/03/2019
[  225.360505] RIP: 0010:imgu_return_all_buffers+0x52/0x8e [ipu3_imgu]
[  225.360507] Code: d4 49 8b 85 70 0a 00 00 49 81 c5 70 0a 00 00 49 39
c5 74 3b 49 bc 00 01 00 00 00 00 ad de 49 8d 5c 24 22 4c 8b 30 48 8b 48
08 <49> 89 4e 08 4c 89 31 4c 89 20 48 89 58 08 48 8d b8 58 fc ff ff 44
[  225.360509] RSP: 0018:ffff9468ab32fbe8 EFLAGS: 00010293
[  225.360511] RAX: ffff8aa7a51577a8 RBX: dead000000000122 RCX:
dead000000000122
[  225.360512] RDX: 0000000000000000 RSI: 0000000000000006 RDI:
ffff8aa7a5157400
[  225.360514] RBP: ffff9468ab32fc18 R08: ffff8aa64e47e600 R09:
0000000000000000
[  225.360515] R10: 0000000000000000 R11: ffffffffc06036e6 R12:
dead000000000100
[  225.360517] R13: ffff8aa7820f1940 R14: dead000000000100 R15:
0000000000000006
[  225.360519] FS:  00007c1146ffd700(0000) GS:ffff8aa7baa00000(0000)
knlGS:0000000000000000
[  225.360521] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  225.360523] CR2: 00007aea3473a000 CR3: 00000000537d6004 CR4:
00000000003606f0
[  225.360525] Call Trace:
[  225.360528]  imgu_vb2_stop_streaming+0xd6/0xf0 [ipu3_imgu]
[  225.360531]  __vb2_queue_cancel+0x33/0x22d [videobuf2_common]
[  225.360534]  vb2_core_streamoff+0x16/0x78 [videobuf2_common]
[  225.360537]  __video_do_ioctl+0x33d/0x42a
[  225.360540]  video_usercopy+0x34a/0x615
[  225.360542]  ? video_ioctl2+0x16/0x16
[  225.360546]  v4l2_ioctl+0x46/0x53
[  225.360548]  do_vfs_ioctl+0x50a/0x787
[  225.360551]  ksys_ioctl+0x58/0x83
[  225.360554]  __x64_sys_ioctl+0x1a/0x1e
[  225.360556]  do_syscall_64+0x54/0x68
[  225.360559]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  225.360561] RIP: 0033:0x7c118030f497
[  225.360563] Code: 8a 66 90 48 8b 05 d1 d9 2b 00 64 c7 00 26 00 00 00
48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 d9 2b 00 f7 d8 64 89 01 48
[  225.360565] RSP: 002b:00007c1146ffa5a8 EFLAGS: 00000246 ORIG_RAX:
0000000000000010
[  225.360567] RAX: ffffffffffffffda RBX: 00007c1140010018 RCX:
00007c118030f497
[  225.360569] RDX: 00007c114001019c RSI: 0000000040045613 RDI:
000000000000004c
[  225.360570] RBP: 00007c1146ffa700 R08: 00007c1140010048 R09:
0000000000000000
[  225.360572] R10: 0000000000000000 R11: 0000000000000246 R12:
00007c11400101b0
[  225.360574] R13: 00007c1140010200 R14: 00007c1140010048 R15:
0000000000000001
[  225.360576] Modules linked in: snd_seq_dummy snd_seq snd_seq_device
veth bridge stp llc tun nf_nat_tftp nf_conntrack_tftp nf_nat_ftp
nf_conntrack_ftp esp6 ah6 ip6t_REJECT ip6t_ipv6header cmac rfcomm uinput
ipu3_imgu(C) ipu3_cio2 iova videobuf2_v4l2 videobuf2_common
videobuf2_dma_sg videobuf2_memops ov13858 ov567

Fix this by moving the list_del() call just below the list_first_entry()
call when the buffer no longer needs to be in the list.

Fixes: 8ecc7c9da013 ("media: staging/intel-ipu3: parameter buffer refactoring")
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/ipu3/ipu3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/media/ipu3/ipu3.c b/drivers/staging/media/ipu3/ipu3.c
index 06a61f31ca50..eb16394acf96 100644
--- a/drivers/staging/media/ipu3/ipu3.c
+++ b/drivers/staging/media/ipu3/ipu3.c
@@ -261,6 +261,7 @@ int imgu_queue_buffers(struct imgu_device *imgu, bool initial, unsigned int pipe
 
 			ivb = list_first_entry(&imgu_pipe->nodes[node].buffers,
 					       struct imgu_vb2_buffer, list);
+			list_del(&ivb->list);
 			vb = &ivb->vbb.vb2_buf;
 			r = imgu_css_set_parameters(&imgu->css, pipe,
 						    vb2_plane_vaddr(vb, 0));
@@ -274,7 +275,6 @@ int imgu_queue_buffers(struct imgu_device *imgu, bool initial, unsigned int pipe
 			vb2_buffer_done(vb, VB2_BUF_STATE_DONE);
 			dev_dbg(&imgu->pci_dev->dev,
 				"queue user parameters %d to css.", vb->index);
-			list_del(&ivb->list);
 		} else if (imgu_pipe->queue_enabled[node]) {
 			struct imgu_css_buffer *buf =
 				imgu_queue_getbuf(imgu, node, pipe);
-- 
2.25.1

[PATCH 5.4 024/261] rtw88: fix an issue about leak system resources

[Greg Kroah-Hartman]

From: Dejin Zheng <zhengdejin5@gmail.com>

[ Upstream commit 191f6b08bfef24e1a9641eaac96ed030a7be4599 ]

the related system resources were not released when pci_iomap() return
error in the rtw_pci_io_mapping() function. add pci_release_regions() to
fix it.

Fixes: e3037485c68ec1a ("rtw88: new Realtek 802.11ac driver")
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Acked-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200504083442.3033-1-zhengdejin5@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtw88/pci.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/realtek/rtw88/pci.c b/drivers/net/wireless/realtek/rtw88/pci.c
index 77a2bdee50fa..4a43c4fa716d 100644
--- a/drivers/net/wireless/realtek/rtw88/pci.c
+++ b/drivers/net/wireless/realtek/rtw88/pci.c
@@ -974,6 +974,7 @@ static int rtw_pci_io_mapping(struct rtw_dev *rtwdev,
 	len = pci_resource_len(pdev, bar_id);
 	rtwpci->mmap = pci_iomap(pdev, bar_id, len);
 	if (!rtwpci->mmap) {
+		pci_release_regions(pdev);
 		rtw_err(rtwdev, "failed to map pci memory\n");
 		return -ENOMEM;
 	}
-- 
2.25.1

[PATCH 5.4 025/261] spi: dw: Zero DMA Tx and Rx configurations on stack

[Greg Kroah-Hartman]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 3cb97e223d277f84171cc4ccecab31e08b2ee7b5 ]

Some DMA controller drivers do not tolerate non-zero values in
the DMA configuration structures. Zero them to avoid issues with
such DMA controller drivers. Even despite above this is a good
practice per se.

Fixes: 7063c0d942a1 ("spi/dw_spi: add DMA support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Feng Tang <feng.tang@intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20200506153025.21441-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-dw-mid.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index 2663bb12d9ce..242ac2768518 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -147,6 +147,7 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws,
 	if (!xfer->tx_buf)
 		return NULL;
 
+	memset(&txconf, 0, sizeof(txconf));
 	txconf.direction = DMA_MEM_TO_DEV;
 	txconf.dst_addr = dws->dma_addr;
 	txconf.dst_maxburst = 16;
@@ -193,6 +194,7 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,
 	if (!xfer->rx_buf)
 		return NULL;
 
+	memset(&rxconf, 0, sizeof(rxconf));
 	rxconf.direction = DMA_DEV_TO_MEM;
 	rxconf.src_addr = dws->dma_addr;
 	rxconf.src_maxburst = 16;
-- 
2.25.1

[PATCH 5.4 026/261] ACPICA: Dispatcher: add status checks

[Greg Kroah-Hartman]

From: Erik Kaneda <erik.kaneda@intel.com>

[ Upstream commit 6bfe5344b2956d0bee116f1c640aef05e5cddd76 ]

ACPICA commit 3244c1eeba9f9fb9ccedb875f7923a3d85e0c6aa

The status chekcs are used to to avoid NULL pointer dereference on
field objects

Link: https://github.com/acpica/acpica/commit/3244c1ee
Reported-by: Kurt Kennett <kurt_kennett@hotmail.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/acpica/dsfield.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/acpi/acpica/dsfield.c b/drivers/acpi/acpica/dsfield.c
index 8438e33aa447..fd9028a6bc20 100644
--- a/drivers/acpi/acpica/dsfield.c
+++ b/drivers/acpi/acpica/dsfield.c
@@ -518,13 +518,20 @@ acpi_ds_create_field(union acpi_parse_object *op,
 	info.region_node = region_node;
 
 	status = acpi_ds_get_field_names(&info, walk_state, arg->common.next);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
 	if (info.region_node->object->region.space_id ==
-	    ACPI_ADR_SPACE_PLATFORM_COMM
-	    && !(region_node->object->field.internal_pcc_buffer =
-		 ACPI_ALLOCATE_ZEROED(info.region_node->object->region.
-				      length))) {
-		return_ACPI_STATUS(AE_NO_MEMORY);
+	    ACPI_ADR_SPACE_PLATFORM_COMM) {
+		region_node->object->field.internal_pcc_buffer =
+		    ACPI_ALLOCATE_ZEROED(info.region_node->object->region.
+					 length);
+		if (!region_node->object->field.internal_pcc_buffer) {
+			return_ACPI_STATUS(AE_NO_MEMORY);
+		}
 	}
+
 	return_ACPI_STATUS(status);
 }
 
-- 
2.25.1

[PATCH 5.4 027/261] block: alloc map and request for new hardware queue

[Greg Kroah-Hartman]

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit fd689871bbfbb41cd77379d3e9e5f4def0f7d6c6 ]

Alloc new map and request for new hardware queue when increse
hardware queue count. Before this patch, it will show a
warning for each new hardware queue, but it's not enough, these
hctx have no maps and reqeust, when a bio was mapped to these
hardware queue, it will trigger kernel panic when get request
from these hctx.

Test environment:
 * A NVMe disk supports 128 io queues
 * 96 cpus in system

A corner case can always trigger this panic, there are 96
io queues allocated for HCTX_TYPE_DEFAULT type, the corresponding kernel
log: nvme nvme0: 96/0/0 default/read/poll queues. Now we set nvme write
queues to 96, then nvme will alloc others(32) queues for read, but
blk_mq_update_nr_hw_queues does not alloc map and request for these new
added io queues. So when process read nvme disk, it will trigger kernel
panic when get request from these hardware context.

Reproduce script:

nr=$(expr `cat /sys/block/nvme0n1/device/queue_count` - 1)
echo $nr > /sys/module/nvme/parameters/write_queues
echo 1 > /sys/block/nvme0n1/device/reset_controller
dd if=/dev/nvme0n1 of=/dev/null bs=4K count=1

[ 8040.805626] ------------[ cut here ]------------
[ 8040.805627] WARNING: CPU: 82 PID: 12921 at block/blk-mq.c:2578 blk_mq_map_swqueue+0x2b6/0x2c0
[ 8040.805627] Modules linked in: nvme nvme_core nf_conntrack_netlink xt_addrtype br_netfilter overlay xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nft_counter nf_nat_tftp nf_conntrack_tftp nft_masq nf_tables_set nft_fib_inet nft_f
ib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack tun bridge nf_defrag_ipv6 nf_defrag_ipv4 stp llc ip6_tables ip_tables nft_compat rfkill ip_set nf_tables nfne
tlink sunrpc intel_rapl_msr intel_rapl_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass ipmi_ssif crct10dif_pclmul crc32_pclmul iTCO_wdt iTCO_vendor_support ghash_clmulni_intel intel_
cstate intel_uncore raid0 joydev intel_rapl_perf ipmi_si pcspkr mei_me ioatdma sg ipmi_devintf mei i2c_i801 dca lpc_ich ipmi_msghandler acpi_power_meter acpi_pad xfs libcrc32c sd_mod ast i2c_algo_bit drm_vram_helper drm_ttm_helper ttm d
rm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops
[ 8040.805637]  ahci drm i40e libahci crc32c_intel libata t10_pi wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: nvme_core]
[ 8040.805640] CPU: 82 PID: 12921 Comm: kworker/u194:2 Kdump: loaded Tainted: G        W         5.6.0-rc5.78317c+ #2
[ 8040.805640] Hardware name: Inspur SA5212M5/YZMB-00882-104, BIOS 4.0.9 08/27/2019
[ 8040.805641] Workqueue: nvme-reset-wq nvme_reset_work [nvme]
[ 8040.805642] RIP: 0010:blk_mq_map_swqueue+0x2b6/0x2c0
[ 8040.805643] Code: 00 00 00 00 00 41 83 c5 01 44 39 6d 50 77 b8 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 8b bb 98 00 00 00 89 d6 e8 8c 81 03 00 eb 83 <0f> 0b e9 52 ff ff ff 0f 1f 00 0f 1f 44 00 00 41 57 48 89 f1 41 56
[ 8040.805643] RSP: 0018:ffffba590d2e7d48 EFLAGS: 00010246
[ 8040.805643] RAX: 0000000000000000 RBX: ffff9f013e1ba800 RCX: 000000000000003d
[ 8040.805644] RDX: ffff9f00ffff6000 RSI: 0000000000000003 RDI: ffff9ed200246d90
[ 8040.805644] RBP: ffff9f00f6a79860 R08: 0000000000000000 R09: 000000000000003d
[ 8040.805645] R10: 0000000000000001 R11: ffff9f0138c3d000 R12: ffff9f00fb3a9008
[ 8040.805645] R13: 000000000000007f R14: ffffffff96822660 R15: 000000000000005f
[ 8040.805645] FS:  0000000000000000(0000) GS:ffff9f013fa80000(0000) knlGS:0000000000000000
[ 8040.805646] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8040.805646] CR2: 00007f7f397fa6f8 CR3: 0000003d8240a002 CR4: 00000000007606e0
[ 8040.805647] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 8040.805647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 8040.805647] PKRU: 55555554
[ 8040.805647] Call Trace:
[ 8040.805649]  blk_mq_update_nr_hw_queues+0x31b/0x390
[ 8040.805650]  nvme_reset_work+0xb4b/0xeab [nvme]
[ 8040.805651]  process_one_work+0x1a7/0x370
[ 8040.805652]  worker_thread+0x1c9/0x380
[ 8040.805653]  ? max_active_store+0x80/0x80
[ 8040.805655]  kthread+0x112/0x130
[ 8040.805656]  ? __kthread_parkme+0x70/0x70
[ 8040.805657]  ret_from_fork+0x35/0x40
[ 8040.805658] ---[ end trace b5f13b1e73ccb5d3 ]---
[ 8229.365135] BUG: kernel NULL pointer dereference, address: 0000000000000004
[ 8229.365165] #PF: supervisor read access in kernel mode
[ 8229.365178] #PF: error_code(0x0000) - not-present page
[ 8229.365191] PGD 0 P4D 0
[ 8229.365201] Oops: 0000 [#1] SMP PTI
[ 8229.365212] CPU: 77 PID: 13024 Comm: dd Kdump: loaded Tainted: G        W         5.6.0-rc5.78317c+ #2
[ 8229.365232] Hardware name: Inspur SA5212M5/YZMB-00882-104, BIOS 4.0.9 08/27/2019
[ 8229.365253] RIP: 0010:blk_mq_get_tag+0x227/0x250
[ 8229.365265] Code: 44 24 04 44 01 e0 48 8b 74 24 38 65 48 33 34 25 28 00 00 00 75 33 48 83 c4 40 5b 5d 41 5c 41 5d 41 5e c3 48 8d 68 10 4c 89 ef <44> 8b 60 04 48 89 ee e8 dd f9 ff ff 83 f8 ff 75 c8 e9 67 fe ff ff
[ 8229.365304] RSP: 0018:ffffba590e977970 EFLAGS: 00010246
[ 8229.365317] RAX: 0000000000000000 RBX: ffff9f00f6a79860 RCX: ffffba590e977998
[ 8229.365333] RDX: 0000000000000000 RSI: ffff9f012039b140 RDI: ffffba590e977a38
[ 8229.365349] RBP: 0000000000000010 R08: ffffda58ff94e190 R09: ffffda58ff94e198
[ 8229.365365] R10: 0000000000000011 R11: ffff9f00f6a79860 R12: 0000000000000000
[ 8229.365381] R13: ffffba590e977a38 R14: ffff9f012039b140 R15: 0000000000000001
[ 8229.365397] FS:  00007f481c230580(0000) GS:ffff9f013f940000(0000) knlGS:0000000000000000
[ 8229.365415] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8229.365428] CR2: 0000000000000004 CR3: 0000005f35e26004 CR4: 00000000007606e0
[ 8229.365444] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 8229.365460] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 8229.365476] PKRU: 55555554
[ 8229.365484] Call Trace:
[ 8229.365498]  ? finish_wait+0x80/0x80
[ 8229.365512]  blk_mq_get_request+0xcb/0x3f0
[ 8229.365525]  blk_mq_make_request+0x143/0x5d0
[ 8229.365538]  generic_make_request+0xcf/0x310
[ 8229.365553]  ? scan_shadow_nodes+0x30/0x30
[ 8229.365564]  submit_bio+0x3c/0x150
[ 8229.365576]  mpage_readpages+0x163/0x1a0
[ 8229.365588]  ? blkdev_direct_IO+0x490/0x490
[ 8229.365601]  read_pages+0x6b/0x190
[ 8229.365612]  __do_page_cache_readahead+0x1c1/0x1e0
[ 8229.365626]  ondemand_readahead+0x182/0x2f0
[ 8229.365639]  generic_file_buffered_read+0x590/0xab0
[ 8229.365655]  new_sync_read+0x12a/0x1c0
[ 8229.365666]  vfs_read+0x8a/0x140
[ 8229.365676]  ksys_read+0x59/0xd0
[ 8229.365688]  do_syscall_64+0x55/0x1d0
[ 8229.365700]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Tested-by: Weiping Zhang <zhangweiping@didiglobal.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-mq.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/block/blk-mq.c b/block/blk-mq.c
index 757c0fd9f0cc..22ce0c6a8e6a 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -2493,18 +2493,6 @@ static void blk_mq_map_swqueue(struct request_queue *q)
 	 * If the cpu isn't present, the cpu is mapped to first hctx.
 	 */
 	for_each_possible_cpu(i) {
-		hctx_idx = set->map[HCTX_TYPE_DEFAULT].mq_map[i];
-		/* unmapped hw queue can be remapped after CPU topo changed */
-		if (!set->tags[hctx_idx] &&
-		    !__blk_mq_alloc_rq_map(set, hctx_idx)) {
-			/*
-			 * If tags initialization fail for some hctx,
-			 * that hctx won't be brought online.  In this
-			 * case, remap the current ctx to hctx[0] which
-			 * is guaranteed to always have tags allocated
-			 */
-			set->map[HCTX_TYPE_DEFAULT].mq_map[i] = 0;
-		}
 
 		ctx = per_cpu_ptr(q->queue_ctx, i);
 		for (j = 0; j < set->nr_maps; j++) {
@@ -2513,6 +2501,18 @@ static void blk_mq_map_swqueue(struct request_queue *q)
 						HCTX_TYPE_DEFAULT, i);
 				continue;
 			}
+			hctx_idx = set->map[j].mq_map[i];
+			/* unmapped hw queue can be remapped after CPU topo changed */
+			if (!set->tags[hctx_idx] &&
+			    !__blk_mq_alloc_rq_map(set, hctx_idx)) {
+				/*
+				 * If tags initialization fail for some hctx,
+				 * that hctx won't be brought online.  In this
+				 * case, remap the current ctx to hctx[0] which
+				 * is guaranteed to always have tags allocated
+				 */
+				set->map[j].mq_map[i] = 0;
+			}
 
 			hctx = blk_mq_map_queue_type(q, j, i);
 			ctx->hctxs[j] = hctx;
-- 
2.25.1

[PATCH 5.4 028/261] arm64: insn: Fix two bugs in encoding 32-bit logical immediates

[Greg Kroah-Hartman]

From: Luke Nelson <lukenels@cs.washington.edu>

[ Upstream commit 579d1b3faa3735e781ff74aac0afd598515dbc63 ]

This patch fixes two issues present in the current function for encoding
arm64 logical immediates when using the 32-bit variants of instructions.

First, the code does not correctly reject an all-ones 32-bit immediate,
and returns an undefined instruction encoding.

Second, the code incorrectly rejects some 32-bit immediates that are
actually encodable as logical immediates. The root cause is that the code
uses a default mask of 64-bit all-ones, even for 32-bit immediates.
This causes an issue later on when the default mask is used to fill the
top bits of the immediate with ones, shown here:

  /*
   * Pattern: 0..01..10..01..1
   *
   * Fill the unused top bits with ones, and check if
   * the result is a valid immediate (all ones with a
   * contiguous ranges of zeroes).
   */
  imm |= ~mask;
  if (!range_of_ones(~imm))
          return AARCH64_BREAK_FAULT;

To see the problem, consider an immediate of the form 0..01..10..01..1,
where the upper 32 bits are zero, such as 0x80000001. The code checks
if ~(imm | ~mask) contains a range of ones: the incorrect mask yields
1..10..01..10..0, which fails the check; the correct mask yields
0..01..10..0, which succeeds.

The fix for both issues is to generate a correct mask based on the
instruction immediate size, and use the mask to check for all-ones,
all-zeroes, and values wider than the mask.

Currently, arch/arm64/kvm/va_layout.c is the only user of this function,
which uses 64-bit immediates and therefore won't trigger these bugs.

We tested the new code against llvm-mc with all 1,302 encodable 32-bit
logical immediates and all 5,334 encodable 64-bit logical immediates.

Fixes: ef3935eeebff ("arm64: insn: Add encoder for bitwise operations using literals")
Suggested-by: Will Deacon <will@kernel.org>
Co-developed-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200508181547.24783-2-luke.r.nels@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/insn.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/kernel/insn.c b/arch/arm64/kernel/insn.c
index d801a7094076..a612da533ea2 100644
--- a/arch/arm64/kernel/insn.c
+++ b/arch/arm64/kernel/insn.c
@@ -1508,16 +1508,10 @@ static u32 aarch64_encode_immediate(u64 imm,
 				    u32 insn)
 {
 	unsigned int immr, imms, n, ones, ror, esz, tmp;
-	u64 mask = ~0UL;
-
-	/* Can't encode full zeroes or full ones */
-	if (!imm || !~imm)
-		return AARCH64_BREAK_FAULT;
+	u64 mask;
 
 	switch (variant) {
 	case AARCH64_INSN_VARIANT_32BIT:
-		if (upper_32_bits(imm))
-			return AARCH64_BREAK_FAULT;
 		esz = 32;
 		break;
 	case AARCH64_INSN_VARIANT_64BIT:
@@ -1529,6 +1523,12 @@ static u32 aarch64_encode_immediate(u64 imm,
 		return AARCH64_BREAK_FAULT;
 	}
 
+	mask = GENMASK(esz - 1, 0);
+
+	/* Can't encode full zeroes, full ones, or value wider than the mask */
+	if (!imm || imm == mask || imm & ~mask)
+		return AARCH64_BREAK_FAULT;
+
 	/*
 	 * Inverse of Replicate(). Try to spot a repeating pattern
 	 * with a pow2 stride.
-- 
2.25.1

[PATCH 5.4 029/261] block: reset mapping if failed to update hardware queue count

[Greg Kroah-Hartman]

From: Weiping Zhang <zhangweiping@didiglobal.com>

[ Upstream commit aa880ad690ab6d4c53934af85fb5a43e69ecb0f5 ]

When we increase hardware queue count, blk_mq_update_queue_map will
reset the mapping between cpu and hardware queue base on the hardware
queue count(set->nr_hw_queues). The mapping cannot be reset if it
encounters error in blk_mq_realloc_hw_ctxs, but the fallback flow will
continue using it, then blk_mq_map_swqueue will touch a invalid memory,
because the mapping points to a wrong hctx.

blktest block/030:

null_blk: module loaded
Increasing nr_hw_queues to 8 fails, fallback to 1
==================================================================
BUG: KASAN: null-ptr-deref in blk_mq_map_swqueue+0x2f2/0x830
Read of size 8 at addr 0000000000000128 by task nproc/8541

CPU: 5 PID: 8541 Comm: nproc Not tainted 5.7.0-rc4-dbg+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014
Call Trace:
dump_stack+0xa5/0xe6
__kasan_report.cold+0x65/0xbb
kasan_report+0x45/0x60
check_memory_region+0x15e/0x1c0
__kasan_check_read+0x15/0x20
blk_mq_map_swqueue+0x2f2/0x830
__blk_mq_update_nr_hw_queues+0x3df/0x690
blk_mq_update_nr_hw_queues+0x32/0x50
nullb_device_submit_queues_store+0xde/0x160 [null_blk]
configfs_write_file+0x1c4/0x250 [configfs]
__vfs_write+0x4c/0x90
vfs_write+0x14b/0x2d0
ksys_write+0xdd/0x180
__x64_sys_write+0x47/0x50
do_syscall_64+0x6f/0x310
entry_SYSCALL_64_after_hwframe+0x49/0xb3

Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Tested-by: Bart van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-mq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/block/blk-mq.c b/block/blk-mq.c
index 22ce0c6a8e6a..0550366e25d8 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -3304,8 +3304,8 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set,
 
 	prev_nr_hw_queues = set->nr_hw_queues;
 	set->nr_hw_queues = nr_hw_queues;
-	blk_mq_update_queue_map(set);
 fallback:
+	blk_mq_update_queue_map(set);
 	list_for_each_entry(q, &set->tag_list, tag_set_list) {
 		blk_mq_realloc_hw_ctxs(set, q);
 		if (q->nr_hw_queues != set->nr_hw_queues) {
-- 
2.25.1

[PATCH 5.4 030/261] drm: rcar-du: Set primary plane zpos immutably at initializing

[Greg Kroah-Hartman]

From: Tomohito Esaki <etom@igel.co.jp>

[ Upstream commit 7982471d01aac33994276bf567c8f1f3a137648a ]

According to drm_plane_create_zpos_property() function documentation,
all planes zpos range should be set if zpos property is supported.
However, the rcar-du driver didn't set primary plane zpos range. Since
the primary plane's zpos is fixed, set it immutably.

Reported-by: Yoshihito Ogawa <yoshihito.ogawa.kc@renesas.com>
Reported-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
[Turn continue into if ... else ...]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/rcar-du/rcar_du_plane.c | 16 +++++++++-------
 drivers/gpu/drm/rcar-du/rcar_du_vsp.c   | 14 ++++++++------
 2 files changed, 17 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_plane.c b/drivers/gpu/drm/rcar-du/rcar_du_plane.c
index c6430027169f..a0021fc25b27 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_plane.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_plane.c
@@ -785,13 +785,15 @@ int rcar_du_planes_init(struct rcar_du_group *rgrp)
 
 		drm_plane_create_alpha_property(&plane->plane);
 
-		if (type == DRM_PLANE_TYPE_PRIMARY)
-			continue;
-
-		drm_object_attach_property(&plane->plane.base,
-					   rcdu->props.colorkey,
-					   RCAR_DU_COLORKEY_NONE);
-		drm_plane_create_zpos_property(&plane->plane, 1, 1, 7);
+		if (type == DRM_PLANE_TYPE_PRIMARY) {
+			drm_plane_create_zpos_immutable_property(&plane->plane,
+								 0);
+		} else {
+			drm_object_attach_property(&plane->plane.base,
+						   rcdu->props.colorkey,
+						   RCAR_DU_COLORKEY_NONE);
+			drm_plane_create_zpos_property(&plane->plane, 1, 1, 7);
+		}
 	}
 
 	return 0;
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
index 5e4faf258c31..f1a81c9b184d 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
@@ -392,12 +392,14 @@ int rcar_du_vsp_init(struct rcar_du_vsp *vsp, struct device_node *np,
 		drm_plane_helper_add(&plane->plane,
 				     &rcar_du_vsp_plane_helper_funcs);
 
-		if (type == DRM_PLANE_TYPE_PRIMARY)
-			continue;
-
-		drm_plane_create_alpha_property(&plane->plane);
-		drm_plane_create_zpos_property(&plane->plane, 1, 1,
-					       vsp->num_planes - 1);
+		if (type == DRM_PLANE_TYPE_PRIMARY) {
+			drm_plane_create_zpos_immutable_property(&plane->plane,
+								 0);
+		} else {
+			drm_plane_create_alpha_property(&plane->plane);
+			drm_plane_create_zpos_property(&plane->plane, 1, 1,
+						       vsp->num_planes - 1);
+		}
 	}
 
 	return 0;
-- 
2.25.1

[PATCH 5.4 031/261] lockdown: Allow unprivileged users to see lockdown status

[Greg Kroah-Hartman]

From: Jeremy Cline <jcline@redhat.com>

[ Upstream commit 60cf7c5ed5f7087c4de87a7676b8c82d96fd166c ]

A number of userspace tools, such as systemtap, need a way to see the
current lockdown state so they can gracefully deal with the kernel being
locked down. The state is already exposed in
/sys/kernel/security/lockdown, but is only readable by root. Adjust the
permissions so unprivileged users can read the state.

Fixes: 000d388ed3bb ("security: Add a static lockdown policy LSM")
Cc: Frank Ch. Eigler <fche@redhat.com>
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/lockdown/lockdown.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/security/lockdown/lockdown.c b/security/lockdown/lockdown.c
index b2f87015d6e9..3f38583bed06 100644
--- a/security/lockdown/lockdown.c
+++ b/security/lockdown/lockdown.c
@@ -177,7 +177,7 @@ static int __init lockdown_secfs_init(void)
 {
 	struct dentry *dentry;
 
-	dentry = securityfs_create_file("lockdown", 0600, NULL, NULL,
+	dentry = securityfs_create_file("lockdown", 0644, NULL, NULL,
 					&lockdown_ops);
 	return PTR_ERR_OR_ZERO(dentry);
 }
-- 
2.25.1

[PATCH 5.4 032/261] ixgbe: Fix XDP redirect on archs with PAGE_SIZE above 4K

[Greg Kroah-Hartman]

From: Jesper Dangaard Brouer <brouer@redhat.com>

[ Upstream commit 88eb0ee17b2ece64fcf6689a4557a5c2e7a89c4b ]

The ixgbe driver have another memory model when compiled on archs with
PAGE_SIZE above 4096 bytes. In this mode it doesn't split the page in
two halves, but instead increment rx_buffer->page_offset by truesize of
packet (which include headroom and tailroom for skb_shared_info).

This is done correctly in ixgbe_build_skb(), but in ixgbe_rx_buffer_flip
which is currently only called on XDP_TX and XDP_REDIRECT, it forgets
to add the tailroom for skb_shared_info. This breaks XDP_REDIRECT, for
veth and cpumap.  Fix by adding size of skb_shared_info tailroom.

Maintainers notice: This fix have been queued to Jeff.

Fixes: 6453073987ba ("ixgbe: add initial support for xdp redirect")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Link: https://lore.kernel.org/bpf/158945344946.97035.17031588499266605743.stgit@firesoul
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index a26f9fb95ac0..edaa0bffa5c3 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -2254,7 +2254,8 @@ static void ixgbe_rx_buffer_flip(struct ixgbe_ring *rx_ring,
 	rx_buffer->page_offset ^= truesize;
 #else
 	unsigned int truesize = ring_uses_build_skb(rx_ring) ?
-				SKB_DATA_ALIGN(IXGBE_SKB_PAD + size) :
+				SKB_DATA_ALIGN(IXGBE_SKB_PAD + size) +
+				SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) :
 				SKB_DATA_ALIGN(size);
 
 	rx_buffer->page_offset += truesize;
-- 
2.25.1

[PATCH 5.4 033/261] platform/x86: dell-laptop: dont register micmute LED if there is no token

[Greg Kroah-Hartman]

From: Koba Ko <koba.ko@canonical.com>

[ Upstream commit 257e03a334ccb96e657bf5f6ab3b5693a22c2aa4 ]

On Dell G3-3590, error message is issued during boot up,
"platform::micmute: Setting an LED's brightness failed (-19)",
but there's no micmute led on the machine.

Get the related tokens of SMBIOS, GLOBAL_MIC_MUTE_DISABLE/ENABLE.
If one of two tokens doesn't exist,
don't call led_classdev_register() for platform::micmute.
After that, you wouldn't see the platform::micmute in /sys/class/leds/,
and the error message wouldn't see in dmesg.

Fixes: d00fa46e0a2c6 ("platform/x86: dell-laptop: Add micmute LED trigger support")
Signed-off-by: Koba Ko <koba.ko@canonical.com>
Reviewed-by: Mario Limonciello <Mario.limonciello@dell.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/dell-laptop.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index 74e988f839e8..4c1dd1d4e60b 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -2204,10 +2204,13 @@ static int __init dell_init(void)
 
 	dell_laptop_register_notifier(&dell_laptop_notifier);
 
-	micmute_led_cdev.brightness = ledtrig_audio_get(LED_AUDIO_MICMUTE);
-	ret = led_classdev_register(&platform_device->dev, &micmute_led_cdev);
-	if (ret < 0)
-		goto fail_led;
+	if (dell_smbios_find_token(GLOBAL_MIC_MUTE_DISABLE) &&
+	    dell_smbios_find_token(GLOBAL_MIC_MUTE_ENABLE)) {
+		micmute_led_cdev.brightness = ledtrig_audio_get(LED_AUDIO_MICMUTE);
+		ret = led_classdev_register(&platform_device->dev, &micmute_led_cdev);
+		if (ret < 0)
+			goto fail_led;
+	}
 
 	if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
 		return 0;
-- 
2.25.1

[PATCH 5.4 034/261] MIPS: Loongson: Build ATI Radeon GPU driver as module

[Greg Kroah-Hartman]

From: Tiezhu Yang <yangtiezhu@loongson.cn>

[ Upstream commit a44de7497f91834df0b8b6d459e259788ba66794 ]

When ATI Radeon GPU driver has been compiled directly into the kernel
instead of as a module, we should make sure the firmware for the model
(check available ones in /lib/firmware/radeon) is built-in to the kernel
as well, otherwise there exists the following fatal error during GPU init,
change CONFIG_DRM_RADEON=y to CONFIG_DRM_RADEON=m to fix it.

[    1.900997] [drm] Loading RS780 Microcode
[    1.905077] radeon 0000:01:05.0: Direct firmware load for radeon/RS780_pfp.bin failed with error -2
[    1.914140] r600_cp: Failed to load firmware "radeon/RS780_pfp.bin"
[    1.920405] [drm:r600_init] *ERROR* Failed to load firmware!
[    1.926069] radeon 0000:01:05.0: Fatal error during GPU init
[    1.931729] [drm] radeon: finishing device.

Fixes: 024e6a8b5bb1 ("MIPS: Loongson: Add a Loongson-3 default config file")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/configs/loongson3_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig
index 90ee0084d786..e41f4841cb4d 100644
--- a/arch/mips/configs/loongson3_defconfig
+++ b/arch/mips/configs/loongson3_defconfig
@@ -231,7 +231,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_DRM=y
-CONFIG_DRM_RADEON=y
+CONFIG_DRM_RADEON=m
 CONFIG_FB_RADEON=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=m
-- 
2.25.1

[PATCH 5.4 035/261] Bluetooth: Add SCO fallback for invalid LMP parameters error

[Greg Kroah-Hartman]

From: Hsin-Yu Chao <hychao@chromium.org>

[ Upstream commit 56b5453a86203a44726f523b4133c1feca49ce7c ]

Bluetooth PTS test case HFP/AG/ACC/BI-12-I accepts SCO connection
with invalid parameter at the first SCO request expecting AG to
attempt another SCO request with the use of "safe settings" for
given codec, base on section 5.7.1.2 of HFP 1.7 specification.

This patch addresses it by adding "Invalid LMP Parameters" (0x1e)
to the SCO fallback case. Verified with below log:

< HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17
        Handle: 256
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x0380
          3-EV3 may not be used
          2-EV5 may not be used
          3-EV5 may not be used
> HCI Event: Command Status (0x0f) plen 4
      Setup Synchronous Connection (0x01|0x0028) ncmd 1
        Status: Success (0x00)
> HCI Event: Number of Completed Packets (0x13) plen 5
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Max Slots Change (0x1b) plen 3
        Handle: 256
        Max slots: 1
> HCI Event: Synchronous Connect Complete (0x2c) plen 17
        Status: Invalid LMP Parameters / Invalid LL Parameters (0x1e)
        Handle: 0
        Address: 00:1B:DC:F2:21:59 (OUI 00-1B-DC)
        Link type: eSCO (0x02)
        Transmission interval: 0x00
        Retransmission window: 0x02
        RX packet length: 0
        TX packet length: 0
        Air mode: Transparent (0x03)
< HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17
        Handle: 256
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 8
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x03c8
          EV3 may be used
          2-EV3 may not be used
          3-EV3 may not be used
          2-EV5 may not be used
          3-EV5 may not be used
> HCI Event: Command Status (0x0f) plen 4
      Setup Synchronous Connection (0x01|0x0028) ncmd 1
        Status: Success (0x00)
> HCI Event: Max Slots Change (0x1b) plen 3
        Handle: 256
        Max slots: 5
> HCI Event: Max Slots Change (0x1b) plen 3
        Handle: 256
        Max slots: 1
> HCI Event: Synchronous Connect Complete (0x2c) plen 17
        Status: Success (0x00)
        Handle: 257
        Address: 00:1B:DC:F2:21:59 (OUI 00-1B-DC)
        Link type: eSCO (0x02)
        Transmission interval: 0x06
        Retransmission window: 0x04
        RX packet length: 30
        TX packet length: 30
        Air mode: Transparent (0x03)

Signed-off-by: Hsin-Yu Chao <hychao@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_event.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index c1d3a303d97f..88cd410e5728 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -4216,6 +4216,7 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev,
 	case 0x11:	/* Unsupported Feature or Parameter Value */
 	case 0x1c:	/* SCO interval rejected */
 	case 0x1a:	/* Unsupported Remote Feature */
+	case 0x1e:	/* Invalid LMP Parameters */
 	case 0x1f:	/* Unspecified error */
 	case 0x20:	/* Unsupported LMP Parameter value */
 		if (conn->out) {
-- 
2.25.1

[PATCH 5.4 036/261] kgdb: Disable WARN_CONSOLE_UNLOCKED for all kgdb

[Greg Kroah-Hartman]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 202164fbfa2b2ffa3e66b504e0f126ba9a745006 ]

In commit 81eaadcae81b ("kgdboc: disable the console lock when in
kgdb") we avoided the WARN_CONSOLE_UNLOCKED() yell when we were in
kgdboc.  That still works fine, but it turns out that we get a similar
yell when using other I/O drivers.  One example is the "I/O driver"
for the kgdb test suite (kgdbts).  When I enabled that I again got the
same yells.

Even though "kgdbts" doesn't actually interact with the user over the
console, using it still causes kgdb to print to the consoles.  That
trips the same warning:
  con_is_visible+0x60/0x68
  con_scroll+0x110/0x1b8
  lf+0x4c/0xc8
  vt_console_print+0x1b8/0x348
  vkdb_printf+0x320/0x89c
  kdb_printf+0x68/0x90
  kdb_main_loop+0x190/0x860
  kdb_stub+0x2cc/0x3ec
  kgdb_cpu_enter+0x268/0x744
  kgdb_handle_exception+0x1a4/0x200
  kgdb_compiled_brk_fn+0x34/0x44
  brk_handler+0x7c/0xb8
  do_debug_exception+0x1b4/0x228

Let's increment/decrement the "ignore_console_lock_warning" variable
all the time when we enter the debugger.

This will allow us to later revert commit 81eaadcae81b ("kgdboc:
disable the console lock when in kgdb").

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200507130644.v4.1.Ied2b058357152ebcc8bf68edd6f20a11d98d7d4e@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/debug/debug_core.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index f76d6f77dd5e..d0d557c0ceff 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -634,6 +634,8 @@ return_normal:
 	if (kgdb_skipexception(ks->ex_vector, ks->linux_regs))
 		goto kgdb_restore;
 
+	atomic_inc(&ignore_console_lock_warning);
+
 	/* Call the I/O driver's pre_exception routine */
 	if (dbg_io_ops->pre_exception)
 		dbg_io_ops->pre_exception();
@@ -706,6 +708,8 @@ cpu_master_loop:
 	if (dbg_io_ops->post_exception)
 		dbg_io_ops->post_exception();
 
+	atomic_dec(&ignore_console_lock_warning);
+
 	if (!kgdb_single_step) {
 		raw_spin_unlock(&dbg_slave_lock);
 		/* Wait till all the CPUs have quit from the debugger. */
-- 
2.25.1

[PATCH 5.4 037/261] kgdb: Prevent infinite recursive entries to the debugger

[Greg Kroah-Hartman]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 3ca676e4ca60d1834bb77535dafe24169cadacef ]

If we detect that we recursively entered the debugger we should hack
our I/O ops to NULL so that the panic() in the next line won't
actually cause another recursion into the debugger.  The first line of
kgdb_panic() will check this and return.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200507130644.v4.6.I89de39f68736c9de610e6f241e68d8dbc44bc266@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/debug/debug_core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index d0d557c0ceff..7d54c7c28054 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -501,6 +501,7 @@ static int kgdb_reenter_check(struct kgdb_state *ks)
 
 	if (exception_level > 1) {
 		dump_stack();
+		kgdb_io_module_registered = false;
 		panic("Recursive entry to debugger");
 	}
 
-- 
2.25.1

[PATCH 5.4 038/261] pmu/smmuv3: Clear IRQ affinity hint on device removal

[Greg Kroah-Hartman]

From: Jean-Philippe Brucker <jean-philippe@linaro.org>

[ Upstream commit 10f6cd2af21bb44faab31a50ec3361d7649e5a39 ]

Currently when trying to remove the SMMUv3 PMU module we get a
WARN_ON_ONCE from free_irq(), because the affinity hint set during probe
hasn't been properly cleared.

[  238.878383] WARNING: CPU: 0 PID: 175 at kernel/irq/manage.c:1744 free_irq+0x324/0x358
...
[  238.897263] Call trace:
[  238.897998]  free_irq+0x324/0x358
[  238.898792]  devm_irq_release+0x18/0x28
[  238.899189]  release_nodes+0x1b0/0x228
[  238.899984]  devres_release_all+0x38/0x60
[  238.900779]  device_release_driver_internal+0x10c/0x1d0
[  238.901574]  driver_detach+0x50/0xe0
[  238.902368]  bus_remove_driver+0x5c/0xd8
[  238.903448]  driver_unregister+0x30/0x60
[  238.903958]  platform_driver_unregister+0x14/0x20
[  238.905075]  arm_smmu_pmu_exit+0x1c/0xecc [arm_smmuv3_pmu]
[  238.905547]  __arm64_sys_delete_module+0x14c/0x260
[  238.906342]  el0_svc_common.constprop.0+0x74/0x178
[  238.907355]  do_el0_svc+0x24/0x90
[  238.907932]  el0_sync_handler+0x11c/0x198
[  238.908979]  el0_sync+0x158/0x180

Just like the other perf drivers, clear the affinity hint before
releasing the device.

Fixes: 7d839b4b9e00 ("perf/smmuv3: Add arm64 smmuv3 pmu driver")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20200422084805.237738-1-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/perf/arm_smmuv3_pmu.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/perf/arm_smmuv3_pmu.c b/drivers/perf/arm_smmuv3_pmu.c
index 2f8787276d9b..3269232ff570 100644
--- a/drivers/perf/arm_smmuv3_pmu.c
+++ b/drivers/perf/arm_smmuv3_pmu.c
@@ -815,7 +815,7 @@ static int smmu_pmu_probe(struct platform_device *pdev)
 	if (err) {
 		dev_err(dev, "Error %d registering hotplug, PMU @%pa\n",
 			err, &res_0->start);
-		return err;
+		goto out_clear_affinity;
 	}
 
 	err = perf_pmu_register(&smmu_pmu->pmu, name, -1);
@@ -834,6 +834,8 @@ static int smmu_pmu_probe(struct platform_device *pdev)
 
 out_unregister:
 	cpuhp_state_remove_instance_nocalls(cpuhp_state_num, &smmu_pmu->node);
+out_clear_affinity:
+	irq_set_affinity_hint(smmu_pmu->irq, NULL);
 	return err;
 }
 
@@ -843,6 +845,7 @@ static int smmu_pmu_remove(struct platform_device *pdev)
 
 	perf_pmu_unregister(&smmu_pmu->pmu);
 	cpuhp_state_remove_instance_nocalls(cpuhp_state_num, &smmu_pmu->node);
+	irq_set_affinity_hint(smmu_pmu->irq, NULL);
 
 	return 0;
 }
-- 
2.25.1

[PATCH 5.4 039/261] ACPI/IORT: Fix PMCG node single ID mapping handling

[Greg Kroah-Hartman]

From: Tuan Phan <tuanphan@os.amperecomputing.com>

[ Upstream commit 50c8ab8d9fbf5b18d5162a797ca26568afc0af1a ]

An IORT PMCG node can have no ID mapping if its overflow interrupt is
wire based therefore the code that parses the PMCG node can not assume
the node will always have a single mapping present at index 0.

Fix iort_get_id_mapping_index() by checking for an overflow interrupt
and mapping count.

Fixes: 24e516049360 ("ACPI/IORT: Add support for PMCG")

Signed-off-by: Tuan Phan <tuanphan@os.amperecomputing.com>
Reviewed-by: Hanjun Guo <guoahanjun@huawei.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/1589994787-28637-1-git-send-email-tuanphan@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/arm64/iort.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 5a7551d060f2..bc95a5eebd13 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -361,6 +361,7 @@ static struct acpi_iort_node *iort_node_get_id(struct acpi_iort_node *node,
 static int iort_get_id_mapping_index(struct acpi_iort_node *node)
 {
 	struct acpi_iort_smmu_v3 *smmu;
+	struct acpi_iort_pmcg *pmcg;
 
 	switch (node->type) {
 	case ACPI_IORT_NODE_SMMU_V3:
@@ -388,6 +389,10 @@ static int iort_get_id_mapping_index(struct acpi_iort_node *node)
 
 		return smmu->id_mapping_index;
 	case ACPI_IORT_NODE_PMCG:
+		pmcg = (struct acpi_iort_pmcg *)node->node_data;
+		if (pmcg->overflow_gsiv || node->mapping_count == 0)
+			return -EINVAL;
+
 		return 0;
 	default:
 		return -EINVAL;
-- 
2.25.1

[PATCH 5.4 040/261] mips: Fix cpu_has_mips64r1/2 activation for MIPS32 CPUs

[Greg Kroah-Hartman]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

[ Upstream commit a2ac81c6ef4018ea49c034ce165bb9ea1cf99f3e ]

Commit 1aeba347b3a9 ("MIPS: Hardcode cpu_has_mips* where target ISA
allows") updated the cpu_has_mips* macro to be replaced with a constant
expression where it's possible. By mistake it wasn't done correctly
for cpu_has_mips64r1/cpu_has_mips64r2 macro. They are defined to
be replaced with conditional expression __isa_range_or_flag(), which
means either ISA revision being within the range or the corresponding
CPU options flag was set at the probe stage or both being true at the
same time. But the ISA level value doesn't indicate whether the ISA is
MIPS32 or MIPS64. Due to this if we select MIPS32r1 - MIPS32r5
architectures the __isa_range() macro will activate the
cpu_has_mips64rX flags, which is incorrect. In order to fix the
problem we make sure the 64bits CPU support is enabled by means of
checking the flag cpu_has_64bits aside with proper ISA range and specific
Revision flag being set.

Fixes: 1aeba347b3a9 ("MIPS: Hardcode cpu_has_mips* where target ISA allows")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/include/asm/cpu-features.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index 983a6a7f43a1..3e26b0c7391b 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -288,10 +288,12 @@
 # define cpu_has_mips32r6	__isa_ge_or_flag(6, MIPS_CPU_ISA_M32R6)
 #endif
 #ifndef cpu_has_mips64r1
-# define cpu_has_mips64r1	__isa_range_or_flag(1, 6, MIPS_CPU_ISA_M64R1)
+# define cpu_has_mips64r1	(cpu_has_64bits && \
+				 __isa_range_or_flag(1, 6, MIPS_CPU_ISA_M64R1))
 #endif
 #ifndef cpu_has_mips64r2
-# define cpu_has_mips64r2	__isa_range_or_flag(2, 6, MIPS_CPU_ISA_M64R2)
+# define cpu_has_mips64r2	(cpu_has_64bits && \
+				 __isa_range_or_flag(2, 6, MIPS_CPU_ISA_M64R2))
 #endif
 #ifndef cpu_has_mips64r6
 # define cpu_has_mips64r6	__isa_ge_and_flag(6, MIPS_CPU_ISA_M64R6)
-- 
2.25.1

[PATCH 5.4 041/261] spi: dw: Enable interrupts in accordance with DMA xfer mode

[Greg Kroah-Hartman]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

[ Upstream commit 43dba9f3f98c2b184a19f856f06fe22817bfd9e0 ]

It's pointless to track the Tx overrun interrupts if Rx-only SPI
transfer is issued. Similarly there is no need in handling the Rx
overrun/underrun interrupts if Tx-only SPI transfer is executed.
So lets unmask the interrupts only if corresponding SPI
transactions are implied.

Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200522000806.7381-3-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-dw-mid.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index 242ac2768518..b044d4071690 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -220,19 +220,23 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,
 
 static int mid_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer)
 {
-	u16 dma_ctrl = 0;
+	u16 imr = 0, dma_ctrl = 0;
 
 	dw_writel(dws, DW_SPI_DMARDLR, 0xf);
 	dw_writel(dws, DW_SPI_DMATDLR, 0x10);
 
-	if (xfer->tx_buf)
+	if (xfer->tx_buf) {
 		dma_ctrl |= SPI_DMA_TDMAE;
-	if (xfer->rx_buf)
+		imr |= SPI_INT_TXOI;
+	}
+	if (xfer->rx_buf) {
 		dma_ctrl |= SPI_DMA_RDMAE;
+		imr |= SPI_INT_RXUI | SPI_INT_RXOI;
+	}
 	dw_writel(dws, DW_SPI_DMACR, dma_ctrl);
 
 	/* Set the interrupt mask */
-	spi_umask_intr(dws, SPI_INT_TXOI | SPI_INT_RXUI | SPI_INT_RXOI);
+	spi_umask_intr(dws, imr);
 
 	dws->transfer_handler = dma_transfer;
 
-- 
2.25.1

[PATCH 5.4 042/261] clocksource: dw_apb_timer: Make CPU-affiliation being optional

[Greg Kroah-Hartman]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

[ Upstream commit cee43dbf2ee3f430434e2b66994eff8a1aeda889 ]

Currently the DW APB Timer driver binds each clockevent timers to a
particular CPU. This isn't good for multiple reasons. First of all seeing
the device is placed on APB bus (which makes it accessible from any CPU
core), accessible over MMIO and having the DYNIRQ flag set we can be sure
that manually binding the timer to any CPU just isn't correct. By doing
so we just set an extra limitation on device usage. This also doesn't
reflect the device actual capability, since by setting the IRQ affinity
we can make it virtually local to any CPU. Secondly imagine if you had a
real CPU-local timer with the same rating and the same CPU-affinity.
In this case if DW APB timer was registered first, then due to the
clockevent framework tick-timer selection procedure we'll end up with the
real CPU-local timer being left unselected for clock-events tracking. But
on most of the platforms (MIPS/ARM/etc) such timers are normally embedded
into the CPU core and are accessible with much better performance then
devices placed on APB. For instance in MIPS architectures there is
r4k-timer, which is CPU-local, assigned with the same rating, and normally
its clockevent device is registered after the platform-specific one.

So in order to fix all of these issues let's make the DW APB Timer CPU
affinity being optional and deactivated by passing a negative CPU id,
which will effectively set the DW APB clockevent timer cpumask to
'cpu_possible_mask'.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200521204818.25436-5-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clocksource/dw_apb_timer.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/clocksource/dw_apb_timer.c b/drivers/clocksource/dw_apb_timer.c
index 654766538f93..10ce69548f1b 100644
--- a/drivers/clocksource/dw_apb_timer.c
+++ b/drivers/clocksource/dw_apb_timer.c
@@ -222,7 +222,8 @@ static int apbt_next_event(unsigned long delta,
 /**
  * dw_apb_clockevent_init() - use an APB timer as a clock_event_device
  *
- * @cpu:	The CPU the events will be targeted at.
+ * @cpu:	The CPU the events will be targeted at or -1 if CPU affiliation
+ *		isn't required.
  * @name:	The name used for the timer and the IRQ for it.
  * @rating:	The rating to give the timer.
  * @base:	I/O base for the timer registers.
@@ -257,7 +258,7 @@ dw_apb_clockevent_init(int cpu, const char *name, unsigned rating,
 	dw_ced->ced.max_delta_ticks = 0x7fffffff;
 	dw_ced->ced.min_delta_ns = clockevent_delta2ns(5000, &dw_ced->ced);
 	dw_ced->ced.min_delta_ticks = 5000;
-	dw_ced->ced.cpumask = cpumask_of(cpu);
+	dw_ced->ced.cpumask = cpu < 0 ? cpu_possible_mask : cpumask_of(cpu);
 	dw_ced->ced.features = CLOCK_EVT_FEAT_PERIODIC |
 				CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_DYNIRQ;
 	dw_ced->ced.set_state_shutdown = apbt_shutdown;
-- 
2.25.1

[PATCH 5.4 043/261] clocksource: dw_apb_timer_of: Fix missing clockevent timers

[Greg Kroah-Hartman]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

[ Upstream commit 6d2e16a3181bafb77b535095c39ad1c8b9558c8c ]

Commit 100214889973 ("clocksource: dw_apb_timer_of: use
clocksource_of_init") replaced a publicly available driver
initialization method with one called by the timer_probe() method
available after CLKSRC_OF. In current implementation it traverses
all the timers available in the system and calls their initialization
methods if corresponding devices were either in dtb or in acpi. But
if before the commit any number of available timers would be installed
as clockevent and clocksource devices, after that there would be at most
two. The rest are just ignored since default case branch doesn't do
anything. I don't see a reason of such behaviour, neither the commit
message explains it. Moreover this might be wrong if on some platforms
these timers might be used for different purpose, as virtually CPU-local
clockevent timers and as an independent broadcast timer. So in order
to keep the compatibility with the platforms where the order of the
timers detection has some meaning, lets add the secondly discovered
timer to be of clocksource/sched_clock type, while the very first and
the others would provide the clockevents service.

Fixes: 100214889973 ("clocksource: dw_apb_timer_of: use clocksource_of_init")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200521204818.25436-7-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clocksource/dw_apb_timer_of.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c
index 8c28b127759f..6921b91b61ef 100644
--- a/drivers/clocksource/dw_apb_timer_of.c
+++ b/drivers/clocksource/dw_apb_timer_of.c
@@ -147,10 +147,6 @@ static int num_called;
 static int __init dw_apb_timer_init(struct device_node *timer)
 {
 	switch (num_called) {
-	case 0:
-		pr_debug("%s: found clockevent timer\n", __func__);
-		add_clockevent(timer);
-		break;
 	case 1:
 		pr_debug("%s: found clocksource timer\n", __func__);
 		add_clocksource(timer);
@@ -161,6 +157,8 @@ static int __init dw_apb_timer_init(struct device_node *timer)
 #endif
 		break;
 	default:
+		pr_debug("%s: found clockevent timer\n", __func__);
+		add_clockevent(timer);
 		break;
 	}
 
-- 
2.25.1

[PATCH 5.4 044/261] media: dvbdev: Fix tuner->demod media controller link

[Greg Kroah-Hartman]

From: Brad Love <brad@nextdimension.cc>

[ Upstream commit 9f984cacf4f4d53fd8a3f44d7f13528b81c1f6a8 ]

Fixes bug exposed by:

[a3fbc2e6bb0: media: mc-entity.c: use WARN_ON, validate link pads]

The dvbdev incorrectly requests a tuner sink pad to connect to a demux
sink pad. The media controller failure percolates back and the dvb device
creation fails. Fix this by requesting a tuner source pad. Instead of
forcing that pad to be index zero, check if a negative integer error
is returned. A note is added that first source pad found is chosen.

Affected bridges cx231xx and em28xx printed the below warning[s]
when a variety of media controller dvb enabled devices were connected.
The warning returns an error causing all affected devices to fail DVB
device creation.

[  253.138332] ------------[ cut here ]------------
[  253.138339] WARNING: CPU: 0 PID: 1550 at drivers/media/mc/mc-entity.c:669 media_create_pad_link+0x1e0/0x200 [mc]
[  253.138339] Modules linked in: si2168 em28xx_dvb(+) em28xx si2157 lgdt3306a cx231xx_dvb dvb_core cx231xx_alsa cx25840 cx231xx tveeprom cx2341x i2c_mux videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc ir_rc5_decoder rc_hauppauge mceusb rc_core eda
c_mce_amd kvm nls_iso8859_1 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper efi_pstore wmi_bmof k10temp asix usbnet mii nouveau snd_hda_codec_realtek snd_hda_codec_generic input_leds ledtrig_audio snd_hda_codec_hdmi mxm_wmi snd_hda_in
tel video snd_intel_dspcfg ttm snd_hda_codec drm_kms_helper snd_hda_core drm snd_hwdep snd_seq_midi snd_seq_midi_event i2c_algo_bit snd_pcm snd_rawmidi fb_sys_fops snd_seq syscopyarea sysfillrect snd_seq_device sysimgblt snd_timer snd soundcore ccp mac_hid sch_fq_codel parport_p
c ppdev lp parport ip_tables x_tables autofs4 vfio_pci irqbypass vfio_virqfd vfio_iommu_type1 vfio hid_generic usbhid hid i2c_piix4 ahci libahci wmi gpio_amdpt
[  253.138370]  gpio_generic
[  253.138372] CPU: 0 PID: 1550 Comm: modprobe Tainted: G        W         5.7.0-rc2+ #181
[  253.138373] Hardware name: MSI MS-7A39/B350M GAMING PRO (MS-7A39), BIOS 2.G0 04/27/2018
[  253.138376] RIP: 0010:media_create_pad_link+0x1e0/0x200 [mc]
[  253.138378] Code: 26 fd ff ff 44 8b 4d d0 eb d9 0f 0b 41 b9 ea ff ff ff 44 89 c8 c3 0f 0b 41 b9 ea ff ff ff eb f2 0f 0b 41 b9 ea ff ff ff eb e8 <0f> 0b 41 b9 ea ff ff ff eb af 0f 0b 41 b9 ea ff ff ff eb a5 66 90
[  253.138379] RSP: 0018:ffffb9ecc0ee7a78 EFLAGS: 00010246
[  253.138380] RAX: ffff943f706c99d8 RBX: 0000000000000000 RCX: 0000000000000000
[  253.138381] RDX: ffff943f613e0180 RSI: 0000000000000000 RDI: ffff943f706c9958
[  253.138381] RBP: ffffb9ecc0ee7ab0 R08: 0000000000000001 R09: ffff943f613e0180
[  253.138382] R10: ffff943f613e0180 R11: ffff943f706c9400 R12: 0000000000000000
[  253.138383] R13: 0000000000000001 R14: ffff943f706c9958 R15: 0000000000000001
[  253.138384] FS:  00007f3cd29ba540(0000) GS:ffff943f8ec00000(0000) knlGS:0000000000000000
[  253.138385] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  253.138385] CR2: 000055f7de0ca830 CR3: 00000003dd208000 CR4: 00000000003406f0
[  253.138386] Call Trace:
[  253.138392]  media_create_pad_links+0x104/0x1b0 [mc]
[  253.138397]  dvb_create_media_graph+0x350/0x5f0 [dvb_core]
[  253.138402]  em28xx_dvb_init+0x5ea/0x2600 [em28xx_dvb]
[  253.138408]  em28xx_register_extension+0x63/0xc0 [em28xx]
[  253.138410]  ? 0xffffffffc039c000
[  253.138412]  em28xx_dvb_register+0x15/0x1000 [em28xx_dvb]
[  253.138416]  do_one_initcall+0x71/0x250
[  253.138418]  ? do_init_module+0x27/0x22e
[  253.138421]  ? _cond_resched+0x1a/0x50
[  253.138423]  ? kmem_cache_alloc_trace+0x1ec/0x270
[  253.138425]  ? __vunmap+0x1e3/0x240
[  253.138427]  do_init_module+0x5f/0x22e
[  253.138430]  load_module+0x2525/0x2d40
[  253.138436]  __do_sys_finit_module+0xe5/0x120
[  253.138438]  ? __do_sys_finit_module+0xe5/0x120
[  253.138442]  __x64_sys_finit_module+0x1a/0x20
[  253.138443]  do_syscall_64+0x57/0x1b0
[  253.138445]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  253.138446] RIP: 0033:0x7f3cd24dc839
[  253.138448] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48
[  253.138449] RSP: 002b:00007ffe4fc514d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[  253.138450] RAX: ffffffffffffffda RBX: 000055a9237f63f0 RCX: 00007f3cd24dc839
[  253.138451] RDX: 0000000000000000 RSI: 000055a922c3ad2e RDI: 0000000000000000
[  253.138451] RBP: 000055a922c3ad2e R08: 0000000000000000 R09: 0000000000000000
[  253.138452] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[  253.138453] R13: 000055a9237f5550 R14: 0000000000040000 R15: 000055a9237f63f0
[  253.138456] ---[ end trace a60f19c54aa96ec4 ]---

[  234.915628] ------------[ cut here ]------------
[  234.915640] WARNING: CPU: 0 PID: 1502 at drivers/media/mc/mc-entity.c:669 media_create_pad_link+0x1e0/0x200 [mc]
[  234.915641] Modules linked in: si2157 lgdt3306a cx231xx_dvb(+) dvb_core cx231xx_alsa cx25840 cx231xx tveeprom cx2341x i2c_mux videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc ir_rc5_decoder rc_hauppauge mceusb rc_core edac_mce_amd kvm nls_iso8859
_1 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper efi_pstore wmi_bmof k10temp asix usbnet mii nouveau snd_hda_codec_realtek snd_hda_codec_generic input_leds ledtrig_audio snd_hda_codec_hdmi mxm_wmi snd_hda_intel video snd_intel_dspcf
g ttm snd_hda_codec drm_kms_helper snd_hda_core drm snd_hwdep snd_seq_midi snd_seq_midi_event i2c_algo_bit snd_pcm snd_rawmidi fb_sys_fops snd_seq syscopyarea sysfillrect snd_seq_device sysimgblt snd_timer snd soundcore ccp mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tab
les x_tables autofs4 vfio_pci irqbypass vfio_virqfd vfio_iommu_type1 vfio hid_generic usbhid hid i2c_piix4 ahci libahci wmi gpio_amdpt gpio_generic
[  234.915700] CPU: 0 PID: 1502 Comm: modprobe Not tainted 5.7.0-rc2+ #181
[  234.915702] Hardware name: MSI MS-7A39/B350M GAMING PRO (MS-7A39), BIOS 2.G0 04/27/2018
[  234.915709] RIP: 0010:media_create_pad_link+0x1e0/0x200 [mc]
[  234.915712] Code: 26 fd ff ff 44 8b 4d d0 eb d9 0f 0b 41 b9 ea ff ff ff 44 89 c8 c3 0f 0b 41 b9 ea ff ff ff eb f2 0f 0b 41 b9 ea ff ff ff eb e8 <0f> 0b 41 b9 ea ff ff ff eb af 0f 0b 41 b9 ea ff ff ff eb a5 66 90
[  234.915714] RSP: 0018:ffffb9ecc1b6fa50 EFLAGS: 00010246
[  234.915717] RAX: ffff943f8c94a9d8 RBX: 0000000000000000 RCX: 0000000000000000
[  234.915719] RDX: ffff943f613e0900 RSI: 0000000000000000 RDI: ffff943f8c94a958
[  234.915721] RBP: ffffb9ecc1b6fa88 R08: 0000000000000001 R09: ffff943f613e0900
[  234.915723] R10: ffff943f613e0900 R11: ffff943f6b590c00 R12: 0000000000000000
[  234.915724] R13: 0000000000000001 R14: ffff943f8c94a958 R15: 0000000000000001
[  234.915727] FS:  00007f4ca3646540(0000) GS:ffff943f8ec00000(0000) knlGS:0000000000000000
[  234.915729] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  234.915731] CR2: 00007fff7a53ba18 CR3: 00000003da614000 CR4: 00000000003406f0
[  234.915733] Call Trace:
[  234.915745]  media_create_pad_links+0x104/0x1b0 [mc]
[  234.915756]  dvb_create_media_graph+0x350/0x5f0 [dvb_core]
[  234.915766]  dvb_init.part.4+0x691/0x1360 [cx231xx_dvb]
[  234.915780]  dvb_init+0x1a/0x20 [cx231xx_dvb]
[  234.915787]  cx231xx_register_extension+0x71/0xa0 [cx231xx]
[  234.915791]  ? 0xffffffffc042f000
[  234.915796]  cx231xx_dvb_register+0x15/0x1000 [cx231xx_dvb]
[  234.915802]  do_one_initcall+0x71/0x250
[  234.915807]  ? do_init_module+0x27/0x22e
[  234.915811]  ? _cond_resched+0x1a/0x50
[  234.915816]  ? kmem_cache_alloc_trace+0x1ec/0x270
[  234.915820]  ? __vunmap+0x1e3/0x240
[  234.915826]  do_init_module+0x5f/0x22e
[  234.915831]  load_module+0x2525/0x2d40
[  234.915848]  __do_sys_finit_module+0xe5/0x120
[  234.915850]  ? __do_sys_finit_module+0xe5/0x120
[  234.915862]  __x64_sys_finit_module+0x1a/0x20
[  234.915865]  do_syscall_64+0x57/0x1b0
[  234.915870]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  234.915872] RIP: 0033:0x7f4ca3168839
[  234.915876] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48
[  234.915878] RSP: 002b:00007ffcea3db3b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[  234.915881] RAX: ffffffffffffffda RBX: 000055af22c29340 RCX: 00007f4ca3168839
[  234.915882] RDX: 0000000000000000 RSI: 000055af22c38390 RDI: 0000000000000001
[  234.915884] RBP: 000055af22c38390 R08: 0000000000000000 R09: 0000000000000000
[  234.915885] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000
[  234.915887] R13: 000055af22c29060 R14: 0000000000040000 R15: 0000000000000000
[  234.915896] ---[ end trace a60f19c54aa96ec3 ]---

Signed-off-by: Brad Love <brad@nextdimension.cc>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-core/dvbdev.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c
index 917fe034af37..032b6d7dd582 100644
--- a/drivers/media/dvb-core/dvbdev.c
+++ b/drivers/media/dvb-core/dvbdev.c
@@ -707,9 +707,10 @@ int dvb_create_media_graph(struct dvb_adapter *adap,
 	}
 
 	if (ntuner && ndemod) {
-		pad_source = media_get_pad_index(tuner, true,
+		/* NOTE: first found tuner source pad presumed correct */
+		pad_source = media_get_pad_index(tuner, false,
 						 PAD_SIGNAL_ANALOG);
-		if (pad_source)
+		if (pad_source < 0)
 			return -EINVAL;
 		ret = media_create_pad_links(mdev,
 					     MEDIA_ENT_F_TUNER,
-- 
2.25.1

[PATCH 5.4 045/261] btrfs: account for trans_block_rsv in may_commit_transaction

[Greg Kroah-Hartman]

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit bb4f58a747f0421b10645fbf75a6acc88da0de50 ]

On ppc64le with 64k page size (respectively 64k block size) generic/320
was failing and debug output showed we were getting a premature ENOSPC
with a bunch of space in btrfs_fs_info::trans_block_rsv.

This meant there were still open transaction handles holding space, yet
the flusher didn't commit the transaction because it deemed the freed
space won't be enough to satisfy the current reserve ticket. Fix this
by accounting for space in trans_block_rsv when deciding whether the
current transaction should be committed or not.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/space-info.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/fs/btrfs/space-info.c b/fs/btrfs/space-info.c
index e8a4b0ebe97f..5b47e3c44c8f 100644
--- a/fs/btrfs/space-info.c
+++ b/fs/btrfs/space-info.c
@@ -462,6 +462,7 @@ static int may_commit_transaction(struct btrfs_fs_info *fs_info,
 	struct reserve_ticket *ticket = NULL;
 	struct btrfs_block_rsv *delayed_rsv = &fs_info->delayed_block_rsv;
 	struct btrfs_block_rsv *delayed_refs_rsv = &fs_info->delayed_refs_rsv;
+	struct btrfs_block_rsv *trans_rsv = &fs_info->trans_block_rsv;
 	struct btrfs_trans_handle *trans;
 	u64 bytes_needed;
 	u64 reclaim_bytes = 0;
@@ -524,6 +525,11 @@ static int may_commit_transaction(struct btrfs_fs_info *fs_info,
 	spin_lock(&delayed_refs_rsv->lock);
 	reclaim_bytes += delayed_refs_rsv->reserved;
 	spin_unlock(&delayed_refs_rsv->lock);
+
+	spin_lock(&trans_rsv->lock);
+	reclaim_bytes += trans_rsv->reserved;
+	spin_unlock(&trans_rsv->lock);
+
 	if (reclaim_bytes >= bytes_needed)
 		goto commit;
 	bytes_needed -= reclaim_bytes;
-- 
2.25.1

[PATCH 5.4 046/261] btrfs: do not ignore error from btrfs_next_leaf() when inserting checksums

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

[ Upstream commit 7e4a3f7ed5d54926ec671bbb13e171cfe179cc50 ]

We are currently treating any non-zero return value from btrfs_next_leaf()
the same way, by going to the code that inserts a new checksum item in the
tree. However if btrfs_next_leaf() returns an error (a value < 0), we
should just stop and return the error, and not behave as if nothing has
happened, since in that case we do not have a way to know if there is a
next leaf or we are currently at the last leaf already.

So fix that by returning the error from btrfs_next_leaf().

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/file-item.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/file-item.c b/fs/btrfs/file-item.c
index f62a179f85bb..2b8f29c07668 100644
--- a/fs/btrfs/file-item.c
+++ b/fs/btrfs/file-item.c
@@ -798,10 +798,12 @@ again:
 		nritems = btrfs_header_nritems(path->nodes[0]);
 		if (!nritems || (path->slots[0] >= nritems - 1)) {
 			ret = btrfs_next_leaf(root, path);
-			if (ret == 1)
+			if (ret < 0) {
+				goto out;
+			} else if (ret > 0) {
 				found_next = 1;
-			if (ret != 0)
 				goto insert;
+			}
 			slot = path->slots[0];
 		}
 		btrfs_item_key_to_cpu(path->nodes[0], &found_key, slot);
-- 
2.25.1

[PATCH 5.4 047/261] ARM: 8978/1: mm: make act_mm() respect THREAD_SIZE

[Greg Kroah-Hartman]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit e1de94380af588bdf6ad6f0cc1f75004c35bc096 ]

Recent work with KASan exposed the folling hard-coded bitmask
in arch/arm/mm/proc-macros.S:

  bic     rd, sp, #8128
  bic     rd, rd, #63

This forms the bitmask 0x1FFF that is coinciding with
(PAGE_SIZE << THREAD_SIZE_ORDER) - 1, this code was assuming
that THREAD_SIZE is always 8K (8192).

As KASan was increasing THREAD_SIZE_ORDER to 2, I ran into
this bug.

Fix it by this little oneline suggested by Ard:

  bic     rd, sp, #(THREAD_SIZE - 1) & ~63

Where THREAD_SIZE is defined using THREAD_SIZE_ORDER.

We have to also include <linux/const.h> since the THREAD_SIZE
expands to use the _AC() macro.

Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/proc-macros.S | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 5461d589a1e2..60ac7c5999a9 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -5,6 +5,7 @@
  *  VMA_VM_FLAGS
  *  VM_EXEC
  */
+#include <linux/const.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 
@@ -30,7 +31,7 @@
  * act_mm - get current->active_mm
  */
 	.macro	act_mm, rd
-	bic	\rd, sp, #8128
+	bic	\rd, sp, #(THREAD_SIZE - 1) & ~63
 	bic	\rd, \rd, #63
 	ldr	\rd, [\rd, #TI_TASK]
 	.if (TSK_ACTIVE_MM > IMM12_MASK)
-- 
2.25.1

[PATCH 5.4 048/261] batman-adv: Revert "disable ethtool link speed detection when auto negotiation off"

[Greg Kroah-Hartman]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit 9ad346c90509ebd983f60da7d082f261ad329507 ]

The commit 8c46fcd78308 ("batman-adv: disable ethtool link speed detection
when auto negotiation off") disabled the usage of ethtool's link_ksetting
when auto negotation was enabled due to invalid values when used with
tun/tap virtual net_devices. According to the patch, automatic measurements
should be used for these kind of interfaces.

But there are major flaws with this argumentation:

* automatic measurements are not implemented
* auto negotiation has nothing to do with the validity of the retrieved
  values

The first point has to be fixed by a longer patch series. The "validity"
part of the second point must be addressed in the same patch series by
dropping the usage of ethtool's link_ksetting (thus always doing automatic
measurements over ethernet).

Drop the patch again to have more default values for various net_device
types/configurations. The user can still overwrite them using the
batadv_hardif's BATADV_ATTR_THROUGHPUT_OVERRIDE.

Reported-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/bat_v_elp.c | 15 +--------------
 1 file changed, 1 insertion(+), 14 deletions(-)

diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c
index 2614a9caee00..a39af0eefad3 100644
--- a/net/batman-adv/bat_v_elp.c
+++ b/net/batman-adv/bat_v_elp.c
@@ -120,20 +120,7 @@ static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh)
 	rtnl_lock();
 	ret = __ethtool_get_link_ksettings(hard_iface->net_dev, &link_settings);
 	rtnl_unlock();
-
-	/* Virtual interface drivers such as tun / tap interfaces, VLAN, etc
-	 * tend to initialize the interface throughput with some value for the
-	 * sake of having a throughput number to export via ethtool. This
-	 * exported throughput leaves batman-adv to conclude the interface
-	 * throughput is genuine (reflecting reality), thus no measurements
-	 * are necessary.
-	 *
-	 * Based on the observation that those interface types also tend to set
-	 * the link auto-negotiation to 'off', batman-adv shall check this
-	 * setting to differentiate between genuine link throughput information
-	 * and placeholders installed by virtual interfaces.
-	 */
-	if (ret == 0 && link_settings.base.autoneg == AUTONEG_ENABLE) {
+	if (ret == 0) {
 		/* link characteristics might change over time */
 		if (link_settings.base.duplex == DUPLEX_FULL)
 			hard_iface->bat_v.flags |= BATADV_FULL_DUPLEX;
-- 
2.25.1

[PATCH 5.4 049/261] ice: Fix memory leak

[Greg Kroah-Hartman]

From: Surabhi Boob <surabhi.boob@intel.com>

[ Upstream commit 1aaef2bc4e0a5ce9e4dd86359e6a0bf52c6aa64f ]

Handle memory leak on filter management initialization failure.

Signed-off-by: Surabhi Boob <surabhi.boob@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_common.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c
index 171f0b625407..d68b8aa31b19 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.c
+++ b/drivers/net/ethernet/intel/ice/ice_common.c
@@ -436,6 +436,7 @@ static void ice_init_flex_flds(struct ice_hw *hw, enum ice_rxdid prof_id)
 static enum ice_status ice_init_fltr_mgmt_struct(struct ice_hw *hw)
 {
 	struct ice_switch_info *sw;
+	enum ice_status status;
 
 	hw->switch_info = devm_kzalloc(ice_hw_to_dev(hw),
 				       sizeof(*hw->switch_info), GFP_KERNEL);
@@ -446,7 +447,12 @@ static enum ice_status ice_init_fltr_mgmt_struct(struct ice_hw *hw)
 
 	INIT_LIST_HEAD(&sw->vsi_list_map_head);
 
-	return ice_init_def_sw_recp(hw);
+	status = ice_init_def_sw_recp(hw);
+	if (status) {
+		devm_kfree(ice_hw_to_dev(hw), hw->switch_info);
+		return status;
+	}
+	return 0;
 }
 
 /**
-- 
2.25.1

[PATCH 5.4 050/261] ice: Fix for memory leaks and modify ICE_FREE_CQ_BUFS

[Greg Kroah-Hartman]

From: Surabhi Boob <surabhi.boob@intel.com>

[ Upstream commit 68d270783742783f96e89ef92ac24ab3c7fb1d31 ]

Handle memory leaks during control queue initialization and
buffer allocation failures. The macro ICE_FREE_CQ_BUFS is modified to
re-use for this fix.

Signed-off-by: Surabhi Boob <surabhi.boob@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_controlq.c | 49 +++++++++++--------
 1 file changed, 28 insertions(+), 21 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_controlq.c b/drivers/net/ethernet/intel/ice/ice_controlq.c
index c68709c7ef81..2e9c97bad3c3 100644
--- a/drivers/net/ethernet/intel/ice/ice_controlq.c
+++ b/drivers/net/ethernet/intel/ice/ice_controlq.c
@@ -199,7 +199,9 @@ unwind_alloc_rq_bufs:
 		cq->rq.r.rq_bi[i].pa = 0;
 		cq->rq.r.rq_bi[i].size = 0;
 	}
+	cq->rq.r.rq_bi = NULL;
 	devm_kfree(ice_hw_to_dev(hw), cq->rq.dma_head);
+	cq->rq.dma_head = NULL;
 
 	return ICE_ERR_NO_MEMORY;
 }
@@ -245,7 +247,9 @@ unwind_alloc_sq_bufs:
 		cq->sq.r.sq_bi[i].pa = 0;
 		cq->sq.r.sq_bi[i].size = 0;
 	}
+	cq->sq.r.sq_bi = NULL;
 	devm_kfree(ice_hw_to_dev(hw), cq->sq.dma_head);
+	cq->sq.dma_head = NULL;
 
 	return ICE_ERR_NO_MEMORY;
 }
@@ -304,6 +308,28 @@ ice_cfg_rq_regs(struct ice_hw *hw, struct ice_ctl_q_info *cq)
 	return 0;
 }
 
+#define ICE_FREE_CQ_BUFS(hw, qi, ring)					\
+do {									\
+	int i;								\
+	/* free descriptors */						\
+	if ((qi)->ring.r.ring##_bi)					\
+		for (i = 0; i < (qi)->num_##ring##_entries; i++)	\
+			if ((qi)->ring.r.ring##_bi[i].pa) {		\
+				dmam_free_coherent(ice_hw_to_dev(hw),	\
+					(qi)->ring.r.ring##_bi[i].size,	\
+					(qi)->ring.r.ring##_bi[i].va,	\
+					(qi)->ring.r.ring##_bi[i].pa);	\
+					(qi)->ring.r.ring##_bi[i].va = NULL;\
+					(qi)->ring.r.ring##_bi[i].pa = 0;\
+					(qi)->ring.r.ring##_bi[i].size = 0;\
+		}							\
+	/* free the buffer info list */					\
+	if ((qi)->ring.cmd_buf)						\
+		devm_kfree(ice_hw_to_dev(hw), (qi)->ring.cmd_buf);	\
+	/* free DMA head */						\
+	devm_kfree(ice_hw_to_dev(hw), (qi)->ring.dma_head);		\
+} while (0)
+
 /**
  * ice_init_sq - main initialization routine for Control ATQ
  * @hw: pointer to the hardware structure
@@ -357,6 +383,7 @@ static enum ice_status ice_init_sq(struct ice_hw *hw, struct ice_ctl_q_info *cq)
 	goto init_ctrlq_exit;
 
 init_ctrlq_free_rings:
+	ICE_FREE_CQ_BUFS(hw, cq, sq);
 	ice_free_cq_ring(hw, &cq->sq);
 
 init_ctrlq_exit:
@@ -416,33 +443,13 @@ static enum ice_status ice_init_rq(struct ice_hw *hw, struct ice_ctl_q_info *cq)
 	goto init_ctrlq_exit;
 
 init_ctrlq_free_rings:
+	ICE_FREE_CQ_BUFS(hw, cq, rq);
 	ice_free_cq_ring(hw, &cq->rq);
 
 init_ctrlq_exit:
 	return ret_code;
 }
 
-#define ICE_FREE_CQ_BUFS(hw, qi, ring)					\
-do {									\
-	int i;								\
-	/* free descriptors */						\
-	for (i = 0; i < (qi)->num_##ring##_entries; i++)		\
-		if ((qi)->ring.r.ring##_bi[i].pa) {			\
-			dmam_free_coherent(ice_hw_to_dev(hw),		\
-					   (qi)->ring.r.ring##_bi[i].size,\
-					   (qi)->ring.r.ring##_bi[i].va,\
-					   (qi)->ring.r.ring##_bi[i].pa);\
-			(qi)->ring.r.ring##_bi[i].va = NULL;		\
-			(qi)->ring.r.ring##_bi[i].pa = 0;		\
-			(qi)->ring.r.ring##_bi[i].size = 0;		\
-		}							\
-	/* free the buffer info list */					\
-	if ((qi)->ring.cmd_buf)						\
-		devm_kfree(ice_hw_to_dev(hw), (qi)->ring.cmd_buf);	\
-	/* free DMA head */						\
-	devm_kfree(ice_hw_to_dev(hw), (qi)->ring.dma_head);		\
-} while (0)
-
 /**
  * ice_shutdown_sq - shutdown the Control ATQ
  * @hw: pointer to the hardware structure
-- 
2.25.1

[PATCH 5.4 051/261] mmc: meson-mx-sdio: trigger a soft reset after a timeout or CRC error

[Greg Kroah-Hartman]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit 91995b904ec2e44b5c159ac6a5d3f154345a4de7 ]

The vendor driver (from the 3.10 kernel) triggers a soft reset every
time before starting a new command. While this fixes a problem where
SDIO cards are not detected at all (because all commands simply
timed out) this hurts SD card read performance a bit (in my tests
between 10% to 20%).

Trigger a soft reset after we got a CRC error or if the previous command
timed out (just like the vendor driver from the same 3.10 kernel for the
newer SDHC controller IP does). This fixes detection of SDIO cards and
doesn't hurt SD card read performance at the same time.

With this patch the initialization of an RTL8723BS SDIO card looks like
this:
  req done (CMD52): -110: 00000000 00000000 00000000 00000000
  clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 1 timing 0
  starting CMD0 arg 00000000 flags 000000c0
  req done (CMD0): 0: 00000000 00000000 00000000 00000000
  clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 0
  starting CMD8 arg 000001aa flags 000002f5
  req done (CMD8): -110: 00000000 00000000 00000000 00000000
  starting CMD5 arg 00000000 flags 000002e1
  req done (CMD5): 0: 90ff0000 00000000 00000000 00000000
  starting CMD5 arg 00200000 flags 000002e1
  req done (CMD5): 0: 90ff0000 00000000 00000000 00000000
  starting CMD3 arg 00000000 flags 00000075
  req done (CMD3): 0: 00010000 00000000 00000000 00000000
  starting CMD7 arg 00010000 flags 00000015
  req done (CMD7): 0: 00001e00 00000000 00000000 00000000
  starting CMD52 arg 00000000 flags 00000195
  req done (CMD52): 0: 00001032 00000000 00000000 00000000
  [... more CMD52 omitted ...]
  clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 2
  clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 2
  starting CMD52 arg 00000e00 flags 00000195
  req done (CMD52): 0: 00001000 00000000 00000000 00000000
  starting CMD52 arg 80000e02 flags 00000195
  req done (CMD52): 0: 00001002 00000000 00000000 00000000
  clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 4 timing 2
  starting CMD52 arg 00020000 flags 00000195
  req done (CMD52): 0: 00001007 00000000 00000000 00000000
  [... more CMD52 omitted ...]
  new high speed SDIO card at address 0001

Fixes: ed80a13bb4c4c9 ("mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20200503222805.2668941-1-martin.blumenstingl@googlemail.com
Tested-by: Tobias Baumann <017623705678@o2online.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/meson-mx-sdio.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/host/meson-mx-sdio.c b/drivers/mmc/host/meson-mx-sdio.c
index 999214e8cf2b..360d523132bd 100644
--- a/drivers/mmc/host/meson-mx-sdio.c
+++ b/drivers/mmc/host/meson-mx-sdio.c
@@ -246,6 +246,9 @@ static void meson_mx_mmc_request_done(struct meson_mx_mmc_host *host)
 
 	mrq = host->mrq;
 
+	if (host->cmd->error)
+		meson_mx_mmc_soft_reset(host);
+
 	host->mrq = NULL;
 	host->cmd = NULL;
 
-- 
2.25.1

[PATCH 5.4 052/261] Bluetooth: btmtkuart: Improve exception handling in btmtuart_probe()

[Greg Kroah-Hartman]

From: Chuhong Yuan <hslester96@gmail.com>

[ Upstream commit 4803c54ca24923a30664bea2a7772db6e7303c51 ]

Calls of the functions clk_disable_unprepare() and hci_free_dev()
were missing for the exception handling.
Thus add the missed function calls together with corresponding
jump targets.

Fixes: 055825614c6b ("Bluetooth: btmtkuart: add an implementation for clock osc property")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btmtkuart.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/bluetooth/btmtkuart.c b/drivers/bluetooth/btmtkuart.c
index e11169ad8247..8a81fbca5c9d 100644
--- a/drivers/bluetooth/btmtkuart.c
+++ b/drivers/bluetooth/btmtkuart.c
@@ -1015,7 +1015,7 @@ static int btmtkuart_probe(struct serdev_device *serdev)
 	if (btmtkuart_is_standalone(bdev)) {
 		err = clk_prepare_enable(bdev->osc);
 		if (err < 0)
-			return err;
+			goto err_hci_free_dev;
 
 		if (bdev->boot) {
 			gpiod_set_value_cansleep(bdev->boot, 1);
@@ -1028,10 +1028,8 @@ static int btmtkuart_probe(struct serdev_device *serdev)
 
 		/* Power on */
 		err = regulator_enable(bdev->vcc);
-		if (err < 0) {
-			clk_disable_unprepare(bdev->osc);
-			return err;
-		}
+		if (err < 0)
+			goto err_clk_disable_unprepare;
 
 		/* Reset if the reset-gpios is available otherwise the board
 		 * -level design should be guaranteed.
@@ -1063,7 +1061,6 @@ static int btmtkuart_probe(struct serdev_device *serdev)
 	err = hci_register_dev(hdev);
 	if (err < 0) {
 		dev_err(&serdev->dev, "Can't register HCI device\n");
-		hci_free_dev(hdev);
 		goto err_regulator_disable;
 	}
 
@@ -1072,6 +1069,11 @@ static int btmtkuart_probe(struct serdev_device *serdev)
 err_regulator_disable:
 	if (btmtkuart_is_standalone(bdev))
 		regulator_disable(bdev->vcc);
+err_clk_disable_unprepare:
+	if (btmtkuart_is_standalone(bdev))
+		clk_disable_unprepare(bdev->osc);
+err_hci_free_dev:
+	hci_free_dev(hdev);
 
 	return err;
 }
-- 
2.25.1

[PATCH 5.4 053/261] spi: dw: Fix Rx-only DMA transfers

[Greg Kroah-Hartman]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

[ Upstream commit 46164fde6b7890e7a3982d54549947c8394c0192 ]

Tx-only DMA transfers are working perfectly fine since in this case
the code just ignores the Rx FIFO overflow interrupts. But it turns
out the SPI Rx-only transfers are broken since nothing pushing any
data to the shift registers, so the Rx FIFO is left empty and the
SPI core subsystems just returns a timeout error. Since DW DMAC
driver doesn't support something like cyclic write operations of
a single byte to a device register, the only way to support the
Rx-only SPI transfers is to fake it by using a dummy Tx-buffer.
This is what we intend to fix in this commit by setting the
SPI_CONTROLLER_MUST_TX flag for DMA-capable platform.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200529131205.31838-9-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-dw.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 82c5c027ec4c..07d1c170c657 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -529,6 +529,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
 			dws->dma_inited = 0;
 		} else {
 			master->can_dma = dws->dma_ops->can_dma;
+			master->flags |= SPI_CONTROLLER_MUST_TX;
 		}
 	}
 
-- 
2.25.1

[PATCH 5.4 054/261] x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit

[Greg Kroah-Hartman]

From: Jon Doron <arilou@gmail.com>

[ Upstream commit f7d31e65368aeef973fab788aa22c4f1d5a6af66 ]

The problem the patch is trying to address is the fact that 'struct
kvm_hyperv_exit' has different layout on when compiling in 32 and 64 bit
modes.

In 64-bit mode the default alignment boundary is 64 bits thus
forcing extra gaps after 'type' and 'msr' but in 32-bit mode the
boundary is at 32 bits thus no extra gaps.

This is an issue as even when the kernel is 64 bit, the userspace using
the interface can be both 32 and 64 bit but the same 32 bit userspace has
to work with 32 bit kernel.

The issue is fixed by forcing the 64 bit layout, this leads to ABI
change for 32 bit builds and while we are obviously breaking '32 bit
userspace with 32 bit kernel' case, we're fixing the '32 bit userspace
with 64 bit kernel' one.

As the interface has no (known) users and 32 bit KVM is rather baroque
nowadays, this seems like a reasonable decision.

Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200424113746.3473563-2-arilou@gmail.com>
Reviewed-by: Roman Kagan <rvkagan@yandex-team.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/virt/kvm/api.txt | 2 ++
 include/uapi/linux/kvm.h       | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/Documentation/virt/kvm/api.txt b/Documentation/virt/kvm/api.txt
index 4833904d32a5..a18e996fa54b 100644
--- a/Documentation/virt/kvm/api.txt
+++ b/Documentation/virt/kvm/api.txt
@@ -4444,9 +4444,11 @@ EOI was received.
 #define KVM_EXIT_HYPERV_SYNIC          1
 #define KVM_EXIT_HYPERV_HCALL          2
 			__u32 type;
+			__u32 pad1;
 			union {
 				struct {
 					__u32 msr;
+					__u32 pad2;
 					__u64 control;
 					__u64 evt_page;
 					__u64 msg_page;
diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
index 52641d8ca9e8..e735bc4075dc 100644
--- a/include/uapi/linux/kvm.h
+++ b/include/uapi/linux/kvm.h
@@ -189,9 +189,11 @@ struct kvm_hyperv_exit {
 #define KVM_EXIT_HYPERV_SYNIC          1
 #define KVM_EXIT_HYPERV_HCALL          2
 	__u32 type;
+	__u32 pad1;
 	union {
 		struct {
 			__u32 msr;
+			__u32 pad2;
 			__u64 control;
 			__u64 evt_page;
 			__u64 msg_page;
-- 
2.25.1

[PATCH 5.4 055/261] net: vmxnet3: fix possible buffer overflow caused by bad DMA value in vmxnet3_get_rss()

[Greg Kroah-Hartman]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit 3e1c6846b9e108740ef8a37be80314053f5dd52a ]

The value adapter->rss_conf is stored in DMA memory, and it is assigned
to rssConf, so rssConf->indTableSize can be modified at anytime by
malicious hardware. Because rssConf->indTableSize is assigned to n,
buffer overflow may occur when the code "rssConf->indTable[n]" is
executed.

To fix this possible bug, n is checked after being used.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vmxnet3/vmxnet3_ethtool.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/vmxnet3/vmxnet3_ethtool.c b/drivers/net/vmxnet3/vmxnet3_ethtool.c
index 0a38c76688ab..5e2571d23ab9 100644
--- a/drivers/net/vmxnet3/vmxnet3_ethtool.c
+++ b/drivers/net/vmxnet3/vmxnet3_ethtool.c
@@ -702,6 +702,8 @@ vmxnet3_get_rss(struct net_device *netdev, u32 *p, u8 *key, u8 *hfunc)
 		*hfunc = ETH_RSS_HASH_TOP;
 	if (!p)
 		return 0;
+	if (n > UPT1_RSS_MAX_IND_TABLE_SIZE)
+		return 0;
 	while (n--)
 		p[n] = rssConf->indTable[n];
 	return 0;
-- 
2.25.1

[PATCH 5.4 056/261] x86: fix vmap arguments in map_irq_stack

[Greg Kroah-Hartman]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 0348801151b5aefbcf9d6e9b9e30aceb3a2a7b13 ]

vmap does not take a gfp_t, the flags argument is for VM_* flags.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-3-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/irq_64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index 12df3a4abfdd..6b32ab009c19 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -43,7 +43,7 @@ static int map_irq_stack(unsigned int cpu)
 		pages[i] = pfn_to_page(pa >> PAGE_SHIFT);
 	}
 
-	va = vmap(pages, IRQ_STACK_SIZE / PAGE_SIZE, GFP_KERNEL, PAGE_KERNEL);
+	va = vmap(pages, IRQ_STACK_SIZE / PAGE_SIZE, VM_MAP, PAGE_KERNEL);
 	if (!va)
 		return -ENOMEM;
 
-- 
2.25.1

[PATCH 5.4 057/261] staging: android: ion: use vmap instead of vm_map_ram

[Greg Kroah-Hartman]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 5bf9917452112694b2c774465ee4dbe441c84b77 ]

vm_map_ram can keep mappings around after the vm_unmap_ram.  Using that
with non-PAGE_KERNEL mappings can lead to all kinds of aliasing issues.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-4-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/android/ion/ion_heap.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/android/ion/ion_heap.c b/drivers/staging/android/ion/ion_heap.c
index 473b465724f1..0755b11348ed 100644
--- a/drivers/staging/android/ion/ion_heap.c
+++ b/drivers/staging/android/ion/ion_heap.c
@@ -99,12 +99,12 @@ int ion_heap_map_user(struct ion_heap *heap, struct ion_buffer *buffer,
 
 static int ion_heap_clear_pages(struct page **pages, int num, pgprot_t pgprot)
 {
-	void *addr = vm_map_ram(pages, num, -1, pgprot);
+	void *addr = vmap(pages, num, VM_MAP, pgprot);
 
 	if (!addr)
 		return -ENOMEM;
 	memset(addr, 0, PAGE_SIZE * num);
-	vm_unmap_ram(addr, num);
+	vunmap(addr);
 
 	return 0;
 }
-- 
2.25.1

[PATCH 5.4 058/261] ath10k: fix kernel null pointer dereference

[Greg Kroah-Hartman]

From: Venkateswara Naralasetty <vnaralas@codeaurora.org>

[ Upstream commit acb31476adc9ff271140cdd4d3c707ff0c97f5a4 ]

Currently sta airtime is updated without any lock in case of
host based airtime calculation. Which may result in accessing the
invalid sta pointer in case of continuous station connect/disconnect.

This patch fix the kernel null pointer dereference by updating the
station airtime with proper RCU lock in case of host based airtime
calculation.

Proceeding with the analysis of "ARM Kernel Panic".
The APSS crash happened due to OOPS on CPU 0.
Crash Signature : Unable to handle kernel NULL pointer dereference
at virtual address 00000300
During the crash,
PC points to "ieee80211_sta_register_airtime+0x1c/0x448 [mac80211]"
LR points to "ath10k_txrx_tx_unref+0x17c/0x364 [ath10k_core]".
The Backtrace obtained is as follows:
[<bf880238>] (ieee80211_sta_register_airtime [mac80211]) from
[<bf945a38>] (ath10k_txrx_tx_unref+0x17c/0x364 [ath10k_core])
[<bf945a38>] (ath10k_txrx_tx_unref [ath10k_core]) from
[<bf9428e4>] (ath10k_htt_txrx_compl_task+0xa50/0xfc0 [ath10k_core])
[<bf9428e4>] (ath10k_htt_txrx_compl_task [ath10k_core]) from
[<bf9b9bc8>] (ath10k_pci_napi_poll+0x50/0xf8 [ath10k_pci])
[<bf9b9bc8>] (ath10k_pci_napi_poll [ath10k_pci]) from
[<c059e3b0>] (net_rx_action+0xac/0x160)
[<c059e3b0>] (net_rx_action) from [<c02329a4>] (__do_softirq+0x104/0x294)
[<c02329a4>] (__do_softirq) from [<c0232b64>] (run_ksoftirqd+0x30/0x90)
[<c0232b64>] (run_ksoftirqd) from [<c024e358>] (smpboot_thread_fn+0x25c/0x274)
[<c024e358>] (smpboot_thread_fn) from [<c02482fc>] (kthread+0xd8/0xec)

Tested HW: QCA9888
Tested FW: 10.4-3.10-00047

Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1585736290-17661-1-git-send-email-vnaralas@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/txrx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index 39abf8b12903..f46b9083bbf1 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -84,9 +84,11 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
 		wake_up(&htt->empty_tx_wq);
 	spin_unlock_bh(&htt->tx_lock);
 
+	rcu_read_lock();
 	if (txq && txq->sta && skb_cb->airtime_est)
 		ieee80211_sta_register_airtime(txq->sta, txq->tid,
 					       skb_cb->airtime_est, 0);
+	rcu_read_unlock();
 
 	if (ar->bus_param.dev_type != ATH10K_DEV_TYPE_HL)
 		dma_unmap_single(dev, skb_cb->paddr, msdu->len, DMA_TO_DEVICE);
-- 
2.25.1

[PATCH 5.4 059/261] media: staging/intel-ipu3: Implement lock for stream on/off operations

[Greg Kroah-Hartman]

From: Bingbu Cao <bingbu.cao@intel.com>

[ Upstream commit 33e3c349b2bf1235be458df09fb8d237141486c4 ]

Currently concurrent stream off operations on ImgU nodes are not
synchronized, leading to use-after-free bugs (as reported by KASAN).

[  250.090724] BUG: KASAN: use-after-free in
ipu3_dmamap_free+0xc5/0x116 [ipu3_imgu]
[  250.090726] Read of size 8 at addr ffff888127b29bc0 by task
yavta/18836
[  250.090731] Hardware name: HP Soraka/Soraka, BIOS
Google_Soraka.10431.17.0 03/22/2018
[  250.090732] Call Trace:
[  250.090735]  dump_stack+0x6a/0xb1
[  250.090739]  print_address_description+0x8e/0x279
[  250.090743]  ? ipu3_dmamap_free+0xc5/0x116 [ipu3_imgu]
[  250.090746]  kasan_report+0x260/0x28a
[  250.090750]  ipu3_dmamap_free+0xc5/0x116 [ipu3_imgu]
[  250.090754]  ipu3_css_pool_cleanup+0x24/0x37 [ipu3_imgu]
[  250.090759]  ipu3_css_pipeline_cleanup+0x61/0xb9 [ipu3_imgu]
[  250.090763]  ipu3_css_stop_streaming+0x1f2/0x321 [ipu3_imgu]
[  250.090768]  imgu_s_stream+0x94/0x443 [ipu3_imgu]
[  250.090772]  ? ipu3_vb2_buf_queue+0x280/0x280 [ipu3_imgu]
[  250.090775]  ? vb2_dma_sg_unmap_dmabuf+0x16/0x6f [videobuf2_dma_sg]
[  250.090778]  ? vb2_buffer_in_use+0x36/0x58 [videobuf2_common]
[  250.090782]  ipu3_vb2_stop_streaming+0xf9/0x135 [ipu3_imgu]

Implemented a lock to synchronize imgu stream on / off operations and
the modification of streaming flag (in struct imgu_device), to prevent
these issues.

Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/ipu3/ipu3-v4l2.c | 10 ++++++++++
 drivers/staging/media/ipu3/ipu3.c      |  3 +++
 drivers/staging/media/ipu3/ipu3.h      |  4 ++++
 3 files changed, 17 insertions(+)

diff --git a/drivers/staging/media/ipu3/ipu3-v4l2.c b/drivers/staging/media/ipu3/ipu3-v4l2.c
index 3c7ad1eed434..c764cb55dc8d 100644
--- a/drivers/staging/media/ipu3/ipu3-v4l2.c
+++ b/drivers/staging/media/ipu3/ipu3-v4l2.c
@@ -367,8 +367,10 @@ static void imgu_vb2_buf_queue(struct vb2_buffer *vb)
 
 	vb2_set_plane_payload(vb, 0, need_bytes);
 
+	mutex_lock(&imgu->streaming_lock);
 	if (imgu->streaming)
 		imgu_queue_buffers(imgu, false, node->pipe);
+	mutex_unlock(&imgu->streaming_lock);
 
 	dev_dbg(&imgu->pci_dev->dev, "%s for pipe %u node %u", __func__,
 		node->pipe, node->id);
@@ -468,10 +470,13 @@ static int imgu_vb2_start_streaming(struct vb2_queue *vq, unsigned int count)
 	dev_dbg(dev, "%s node name %s pipe %u id %u", __func__,
 		node->name, node->pipe, node->id);
 
+	mutex_lock(&imgu->streaming_lock);
 	if (imgu->streaming) {
 		r = -EBUSY;
+		mutex_unlock(&imgu->streaming_lock);
 		goto fail_return_bufs;
 	}
+	mutex_unlock(&imgu->streaming_lock);
 
 	if (!node->enabled) {
 		dev_err(dev, "IMGU node is not enabled");
@@ -498,9 +503,11 @@ static int imgu_vb2_start_streaming(struct vb2_queue *vq, unsigned int count)
 
 	/* Start streaming of the whole pipeline now */
 	dev_dbg(dev, "IMGU streaming is ready to start");
+	mutex_lock(&imgu->streaming_lock);
 	r = imgu_s_stream(imgu, true);
 	if (!r)
 		imgu->streaming = true;
+	mutex_unlock(&imgu->streaming_lock);
 
 	return 0;
 
@@ -532,6 +539,7 @@ static void imgu_vb2_stop_streaming(struct vb2_queue *vq)
 		dev_err(&imgu->pci_dev->dev,
 			"failed to stop subdev streaming\n");
 
+	mutex_lock(&imgu->streaming_lock);
 	/* Was this the first node with streaming disabled? */
 	if (imgu->streaming && imgu_all_nodes_streaming(imgu, node)) {
 		/* Yes, really stop streaming now */
@@ -542,6 +550,8 @@ static void imgu_vb2_stop_streaming(struct vb2_queue *vq)
 	}
 
 	imgu_return_all_buffers(imgu, node, VB2_BUF_STATE_ERROR);
+	mutex_unlock(&imgu->streaming_lock);
+
 	media_pipeline_stop(&node->vdev.entity);
 }
 
diff --git a/drivers/staging/media/ipu3/ipu3.c b/drivers/staging/media/ipu3/ipu3.c
index eb16394acf96..08eb6791918b 100644
--- a/drivers/staging/media/ipu3/ipu3.c
+++ b/drivers/staging/media/ipu3/ipu3.c
@@ -663,6 +663,7 @@ static int imgu_pci_probe(struct pci_dev *pci_dev,
 		return r;
 
 	mutex_init(&imgu->lock);
+	mutex_init(&imgu->streaming_lock);
 	atomic_set(&imgu->qbuf_barrier, 0);
 	init_waitqueue_head(&imgu->buf_drain_wq);
 
@@ -726,6 +727,7 @@ out_mmu_exit:
 out_css_powerdown:
 	imgu_css_set_powerdown(&pci_dev->dev, imgu->base);
 out_mutex_destroy:
+	mutex_destroy(&imgu->streaming_lock);
 	mutex_destroy(&imgu->lock);
 
 	return r;
@@ -743,6 +745,7 @@ static void imgu_pci_remove(struct pci_dev *pci_dev)
 	imgu_css_set_powerdown(&pci_dev->dev, imgu->base);
 	imgu_dmamap_exit(imgu);
 	imgu_mmu_exit(imgu->mmu);
+	mutex_destroy(&imgu->streaming_lock);
 	mutex_destroy(&imgu->lock);
 }
 
diff --git a/drivers/staging/media/ipu3/ipu3.h b/drivers/staging/media/ipu3/ipu3.h
index 73b123b2b8a2..8cd6a0077d99 100644
--- a/drivers/staging/media/ipu3/ipu3.h
+++ b/drivers/staging/media/ipu3/ipu3.h
@@ -146,6 +146,10 @@ struct imgu_device {
 	 * vid_buf.list and css->queue
 	 */
 	struct mutex lock;
+
+	/* Lock to protect writes to streaming flag in this struct */
+	struct mutex streaming_lock;
+
 	/* Forbid streaming and buffer queuing during system suspend. */
 	atomic_t qbuf_barrier;
 	/* Indicate if system suspend take place while imgu is streaming. */
-- 
2.25.1

[PATCH 5.4 060/261] spi: Respect DataBitLength field of SpiSerialBusV2() ACPI resource

[Greg Kroah-Hartman]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 0dadde344d965566589cd82797893d5aa06557a3 ]

By unknown reason the commit 64bee4d28c9e
  ("spi / ACPI: add ACPI enumeration support")
missed the DataBitLength property to encounter when parse SPI slave
device data from ACPI.

Fill the gap here.

Fixes: 64bee4d28c9e ("spi / ACPI: add ACPI enumeration support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200413180406.1826-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 6bfbf0cfcf63..c6242f0a307f 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -1950,6 +1950,7 @@ static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
 			}
 
 			lookup->max_speed_hz = sb->connection_speed;
+			lookup->bits_per_word = sb->data_bit_length;
 
 			if (sb->clock_phase == ACPI_SPI_SECOND_PHASE)
 				lookup->mode |= SPI_CPHA;
-- 
2.25.1

[PATCH 5.4 061/261] brcmfmac: fix wrong location to get firmware feature

[Greg Kroah-Hartman]

From: Jaehoon Chung <jh80.chung@samsung.com>

[ Upstream commit c57673852062428cdeabdd6501ac8b8e4c302067 ]

sup_wpa feature is getting after setting feature_disable flag.
If firmware is supported sup_wpa feature,  it's always enabled
regardless of feature_disable flag.

Fixes: b8a64f0e96c2 ("brcmfmac: support 4-way handshake offloading for WPA/WPA2-PSK")
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200330052528.10503-1-jh80.chung@samsung.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
index 2c3526aeca6f..545015610cf8 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
@@ -283,13 +283,14 @@ void brcmf_feat_attach(struct brcmf_pub *drvr)
 	if (!err)
 		ifp->drvr->feat_flags |= BIT(BRCMF_FEAT_SCAN_RANDOM_MAC);
 
+	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_FWSUP, "sup_wpa");
+
 	if (drvr->settings->feature_disable) {
 		brcmf_dbg(INFO, "Features: 0x%02x, disable: 0x%02x\n",
 			  ifp->drvr->feat_flags,
 			  drvr->settings->feature_disable);
 		ifp->drvr->feat_flags &= ~drvr->settings->feature_disable;
 	}
-	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_FWSUP, "sup_wpa");
 
 	brcmf_feat_firmware_overrides(drvr);
 
-- 
2.25.1

[PATCH 5.4 062/261] regulator: qcom-rpmh: Fix typos in pm8150 and pm8150l

[Greg Kroah-Hartman]

From: Bjorn Andersson <bjorn.andersson@linaro.org>

[ Upstream commit 906746ba26d0b45688f4c3b730c35f765dc958ba ]

Fix typos in pm8150 l13/l16/l17 and pm8150l ldo8 supplies.

Fixes: 06369bcc15a1 ("regulator: qcom-rpmh: Add support for SM8150")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200415053708.717623-1-bjorn.andersson@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/qcom-rpmh-regulator.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 0246b6f99fb5..f11e4bfbc91b 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -832,11 +832,11 @@ static const struct rpmh_vreg_init_data pm8150_vreg_data[] = {
 	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l2-l10"),
 	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_nldo,      "vdd-l1-l8-l11"),
 	RPMH_VREG("ldo12",  "ldo%s12", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
-	RPMH_VREG("ldo13",  "ldo%s13", &pmic5_pldo,      "vdd-l13-l6-l17"),
+	RPMH_VREG("ldo13",  "ldo%s13", &pmic5_pldo,      "vdd-l13-l16-l17"),
 	RPMH_VREG("ldo14",  "ldo%s14", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
 	RPMH_VREG("ldo15",  "ldo%s15", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
-	RPMH_VREG("ldo16",  "ldo%s16", &pmic5_pldo,      "vdd-l13-l6-l17"),
-	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo,      "vdd-l13-l6-l17"),
+	RPMH_VREG("ldo16",  "ldo%s16", &pmic5_pldo,      "vdd-l13-l16-l17"),
+	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo,      "vdd-l13-l16-l17"),
 	RPMH_VREG("ldo18",  "ldo%s18", &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
 	{},
 };
@@ -857,7 +857,7 @@ static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
 	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo,      "vdd-l4-l5-l6"),
 	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo,      "vdd-l4-l5-l6"),
 	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo,      "vdd-l7-l11"),
-	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_pldo_lv,   "vdd-l1-l8-l11"),
+	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_pldo_lv,   "vdd-l1-l8"),
 	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_pldo,      "vdd-l9-l10"),
 	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l9-l10"),
 	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_pldo,      "vdd-l7-l11"),
-- 
2.25.1

[PATCH 5.4 063/261] tools api fs: Make xxx__mountpoint() more scalable

[Greg Kroah-Hartman]

From: Stephane Eranian <eranian@google.com>

[ Upstream commit c6fddb28bad26e5472cb7acf7b04cd5126f1a4ab ]

The xxx_mountpoint() interface provided by fs.c finds mount points for
common pseudo filesystems. The first time xxx_mountpoint() is invoked,
it scans the mount table (/proc/mounts) looking for a match. If found,
it is cached. The price to scan /proc/mounts is paid once if the mount
is found.

When the mount point is not found, subsequent calls to xxx_mountpoint()
scan /proc/mounts over and over again.  There is no caching.

This causes a scaling issue in perf record with hugeltbfs__mountpoint().
The function is called for each process found in
synthesize__mmap_events().  If the machine has thousands of processes
and if the /proc/mounts has many entries this could cause major overhead
in perf record. We have observed multi-second slowdowns on some
configurations.

As an example on a laptop:

Before:

  $ sudo umount /dev/hugepages
  $ strace -e trace=openat -o /tmp/tt perf record -a ls
  $ fgrep mounts /tmp/tt
  285

After:

  $ sudo umount /dev/hugepages
  $ strace -e trace=openat -o /tmp/tt perf record -a ls
  $ fgrep mounts /tmp/tt
  1

One could argue that the non-caching in case the moint point is not
found is intentional. That way subsequent calls may discover a moint
point if the sysadmin mounts the filesystem. But the same argument could
be made against caching the mount point. It could be unmounted causing
errors.  It all depends on the intent of the interface. This patch
assumes it is expected to scan /proc/mounts once. The patch documents
the caching behavior in the fs.h header file.

An alternative would be to just fix perf record. But it would solve the
problem with hugetlbs__mountpoint() but there could be similar issues
(possibly down the line) with other xxx_mountpoint() calls in perf or
other tools.

Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrey Zhizhikin <andrey.z@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200402154357.107873-3-irogers@google.com
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/api/fs/fs.c | 17 +++++++++++++++++
 tools/lib/api/fs/fs.h | 12 ++++++++++++
 2 files changed, 29 insertions(+)

diff --git a/tools/lib/api/fs/fs.c b/tools/lib/api/fs/fs.c
index bd021a0eeef8..4cc69675c2a9 100644
--- a/tools/lib/api/fs/fs.c
+++ b/tools/lib/api/fs/fs.c
@@ -90,6 +90,7 @@ struct fs {
 	const char * const	*mounts;
 	char			 path[PATH_MAX];
 	bool			 found;
+	bool			 checked;
 	long			 magic;
 };
 
@@ -111,31 +112,37 @@ static struct fs fs__entries[] = {
 		.name	= "sysfs",
 		.mounts	= sysfs__fs_known_mountpoints,
 		.magic	= SYSFS_MAGIC,
+		.checked = false,
 	},
 	[FS__PROCFS] = {
 		.name	= "proc",
 		.mounts	= procfs__known_mountpoints,
 		.magic	= PROC_SUPER_MAGIC,
+		.checked = false,
 	},
 	[FS__DEBUGFS] = {
 		.name	= "debugfs",
 		.mounts	= debugfs__known_mountpoints,
 		.magic	= DEBUGFS_MAGIC,
+		.checked = false,
 	},
 	[FS__TRACEFS] = {
 		.name	= "tracefs",
 		.mounts	= tracefs__known_mountpoints,
 		.magic	= TRACEFS_MAGIC,
+		.checked = false,
 	},
 	[FS__HUGETLBFS] = {
 		.name	= "hugetlbfs",
 		.mounts = hugetlbfs__known_mountpoints,
 		.magic	= HUGETLBFS_MAGIC,
+		.checked = false,
 	},
 	[FS__BPF_FS] = {
 		.name	= "bpf",
 		.mounts = bpf_fs__known_mountpoints,
 		.magic	= BPF_FS_MAGIC,
+		.checked = false,
 	},
 };
 
@@ -158,6 +165,7 @@ static bool fs__read_mounts(struct fs *fs)
 	}
 
 	fclose(fp);
+	fs->checked = true;
 	return fs->found = found;
 }
 
@@ -220,6 +228,7 @@ static bool fs__env_override(struct fs *fs)
 		return false;
 
 	fs->found = true;
+	fs->checked = true;
 	strncpy(fs->path, override_path, sizeof(fs->path) - 1);
 	fs->path[sizeof(fs->path) - 1] = '\0';
 	return true;
@@ -246,6 +255,14 @@ static const char *fs__mountpoint(int idx)
 	if (fs->found)
 		return (const char *)fs->path;
 
+	/* the mount point was already checked for the mount point
+	 * but and did not exist, so return NULL to avoid scanning again.
+	 * This makes the found and not found paths cost equivalent
+	 * in case of multiple calls.
+	 */
+	if (fs->checked)
+		return NULL;
+
 	return fs__get_mountpoint(fs);
 }
 
diff --git a/tools/lib/api/fs/fs.h b/tools/lib/api/fs/fs.h
index 92d03b8396b1..3b70003e7cfb 100644
--- a/tools/lib/api/fs/fs.h
+++ b/tools/lib/api/fs/fs.h
@@ -18,6 +18,18 @@
 	const char *name##__mount(void);	\
 	bool name##__configured(void);		\
 
+/*
+ * The xxxx__mountpoint() entry points find the first match mount point for each
+ * filesystems listed below, where xxxx is the filesystem type.
+ *
+ * The interface is as follows:
+ *
+ * - If a mount point is found on first call, it is cached and used for all
+ *   subsequent calls.
+ *
+ * - If a mount point is not found, NULL is returned on first call and all
+ *   subsequent calls.
+ */
 FS(sysfs)
 FS(procfs)
 FS(debugfs)
-- 
2.25.1

[PATCH 5.4 064/261] e1000: Distribute switch variables for initialization

[Greg Kroah-Hartman]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit a34c7f5156654ebaf7eaace102938be7ff7036cb ]

Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.

To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.

drivers/net/ethernet/intel/e1000/e1000_main.c: In function ‘e1000_xmit_frame’:
drivers/net/ethernet/intel/e1000/e1000_main.c:3143:18: warning: statement will never be executed [-Wswitch-unreachable]
 3143 |     unsigned int pull_size;
      |                  ^~~~~~~~~

[1] https://bugs.llvm.org/show_bug.cgi?id=44916

Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e1000/e1000_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index 86493fea56e4..f93ed70709c6 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -3140,8 +3140,9 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 		hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
 		if (skb->data_len && hdr_len == len) {
 			switch (hw->mac_type) {
+			case e1000_82544: {
 				unsigned int pull_size;
-			case e1000_82544:
+
 				/* Make sure we have room to chop off 4 bytes,
 				 * and that the end alignment will work out to
 				 * this hardware's requirements
@@ -3162,6 +3163,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 				}
 				len = skb_headlen(skb);
 				break;
+			}
 			default:
 				/* do nothing */
 				break;
-- 
2.25.1

[PATCH 5.4 065/261] dt-bindings: display: mediatek: control dpi pins mode to avoid leakage

[Greg Kroah-Hartman]

From: Jitao Shi <jitao.shi@mediatek.com>

[ Upstream commit b0ff9b590733079f7f9453e5976a9dd2630949e3 ]

Add property "pinctrl-names" to swap pin mode between gpio and dpi mode.
Set the dpi pins to gpio mode and output-low to avoid leakage current
when dpi disabled.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../devicetree/bindings/display/mediatek/mediatek,dpi.txt   | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
index b6a7e7397b8b..b944fe067188 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
@@ -16,6 +16,9 @@ Required properties:
   Documentation/devicetree/bindings/graph.txt. This port should be connected
   to the input port of an attached HDMI or LVDS encoder chip.
 
+Optional properties:
+- pinctrl-names: Contain "default" and "sleep".
+
 Example:
 
 dpi0: dpi@1401d000 {
@@ -26,6 +29,9 @@ dpi0: dpi@1401d000 {
 		 <&mmsys CLK_MM_DPI_ENGINE>,
 		 <&apmixedsys CLK_APMIXED_TVDPLL>;
 	clock-names = "pixel", "engine", "pll";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dpi_pin_func>;
+	pinctrl-1 = <&dpi_pin_idle>;
 
 	port {
 		dpi0_out: endpoint {
-- 
2.25.1

[PATCH 5.4 066/261] drm/mediatek: set dpi pin mode to gpio low to avoid leakage current

[Greg Kroah-Hartman]

From: Jitao Shi <jitao.shi@mediatek.com>

[ Upstream commit 6bd4763fd532cff43f9b15704f324c45a9806f53 ]

Config dpi pins mode to output and pull low when dpi is disabled.
Aovid leakage current from some dpi pins (Hsync Vsync DE ... ).

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 31 ++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index be6d95c5ff25..48de07e9059e 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -10,7 +10,9 @@
 #include <linux/kernel.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/of_gpio.h>
 #include <linux/of_graph.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/types.h>
 
@@ -73,6 +75,9 @@ struct mtk_dpi {
 	enum mtk_dpi_out_yc_map yc_map;
 	enum mtk_dpi_out_bit_num bit_num;
 	enum mtk_dpi_out_channel_swap channel_swap;
+	struct pinctrl *pinctrl;
+	struct pinctrl_state *pins_gpio;
+	struct pinctrl_state *pins_dpi;
 	int refcount;
 };
 
@@ -378,6 +383,9 @@ static void mtk_dpi_power_off(struct mtk_dpi *dpi)
 	if (--dpi->refcount != 0)
 		return;
 
+	if (dpi->pinctrl && dpi->pins_gpio)
+		pinctrl_select_state(dpi->pinctrl, dpi->pins_gpio);
+
 	mtk_dpi_disable(dpi);
 	clk_disable_unprepare(dpi->pixel_clk);
 	clk_disable_unprepare(dpi->engine_clk);
@@ -402,6 +410,9 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi)
 		goto err_pixel;
 	}
 
+	if (dpi->pinctrl && dpi->pins_dpi)
+		pinctrl_select_state(dpi->pinctrl, dpi->pins_dpi);
+
 	mtk_dpi_enable(dpi);
 	return 0;
 
@@ -689,6 +700,26 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 	dpi->dev = dev;
 	dpi->conf = (struct mtk_dpi_conf *)of_device_get_match_data(dev);
 
+	dpi->pinctrl = devm_pinctrl_get(&pdev->dev);
+	if (IS_ERR(dpi->pinctrl)) {
+		dpi->pinctrl = NULL;
+		dev_dbg(&pdev->dev, "Cannot find pinctrl!\n");
+	}
+	if (dpi->pinctrl) {
+		dpi->pins_gpio = pinctrl_lookup_state(dpi->pinctrl, "sleep");
+		if (IS_ERR(dpi->pins_gpio)) {
+			dpi->pins_gpio = NULL;
+			dev_dbg(&pdev->dev, "Cannot find pinctrl idle!\n");
+		}
+		if (dpi->pins_gpio)
+			pinctrl_select_state(dpi->pinctrl, dpi->pins_gpio);
+
+		dpi->pins_dpi = pinctrl_lookup_state(dpi->pinctrl, "default");
+		if (IS_ERR(dpi->pins_dpi)) {
+			dpi->pins_dpi = NULL;
+			dev_dbg(&pdev->dev, "Cannot find pinctrl active!\n");
+		}
+	}
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	dpi->regs = devm_ioremap_resource(dev, mem);
 	if (IS_ERR(dpi->regs)) {
-- 
2.25.1

[PATCH 5.4 067/261] audit: fix a net reference leak in audit_send_reply()

[Greg Kroah-Hartman]

From: Paul Moore <paul@paul-moore.com>

[ Upstream commit a48b284b403a4a073d8beb72d2bb33e54df67fb6 ]

If audit_send_reply() fails when trying to create a new thread to
send the reply it also fails to cleanup properly, leaking a reference
to a net structure.  This patch fixes the error path and makes a
handful of other cleanups that came up while fixing the code.

Reported-by: teroincn@gmail.com
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/audit.c | 50 +++++++++++++++++++++++++++++---------------------
 1 file changed, 29 insertions(+), 21 deletions(-)

diff --git a/kernel/audit.c b/kernel/audit.c
index fcfbb3476ccd..a4eeece2eecd 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -923,19 +923,30 @@ out_kfree_skb:
 	return NULL;
 }
 
+static void audit_free_reply(struct audit_reply *reply)
+{
+	if (!reply)
+		return;
+
+	if (reply->skb)
+		kfree_skb(reply->skb);
+	if (reply->net)
+		put_net(reply->net);
+	kfree(reply);
+}
+
 static int audit_send_reply_thread(void *arg)
 {
 	struct audit_reply *reply = (struct audit_reply *)arg;
-	struct sock *sk = audit_get_sk(reply->net);
 
 	audit_ctl_lock();
 	audit_ctl_unlock();
 
 	/* Ignore failure. It'll only happen if the sender goes away,
 	   because our timeout is set to infinite. */
-	netlink_unicast(sk, reply->skb, reply->portid, 0);
-	put_net(reply->net);
-	kfree(reply);
+	netlink_unicast(audit_get_sk(reply->net), reply->skb, reply->portid, 0);
+	reply->skb = NULL;
+	audit_free_reply(reply);
 	return 0;
 }
 
@@ -949,35 +960,32 @@ static int audit_send_reply_thread(void *arg)
  * @payload: payload data
  * @size: payload size
  *
- * Allocates an skb, builds the netlink message, and sends it to the port id.
- * No failure notifications.
+ * Allocates a skb, builds the netlink message, and sends it to the port id.
  */
 static void audit_send_reply(struct sk_buff *request_skb, int seq, int type, int done,
 			     int multi, const void *payload, int size)
 {
-	struct net *net = sock_net(NETLINK_CB(request_skb).sk);
-	struct sk_buff *skb;
 	struct task_struct *tsk;
-	struct audit_reply *reply = kmalloc(sizeof(struct audit_reply),
-					    GFP_KERNEL);
+	struct audit_reply *reply;
 
+	reply = kzalloc(sizeof(*reply), GFP_KERNEL);
 	if (!reply)
 		return;
 
-	skb = audit_make_reply(seq, type, done, multi, payload, size);
-	if (!skb)
-		goto out;
-
-	reply->net = get_net(net);
+	reply->skb = audit_make_reply(seq, type, done, multi, payload, size);
+	if (!reply->skb)
+		goto err;
+	reply->net = get_net(sock_net(NETLINK_CB(request_skb).sk));
 	reply->portid = NETLINK_CB(request_skb).portid;
-	reply->skb = skb;
 
 	tsk = kthread_run(audit_send_reply_thread, reply, "audit_send_reply");
-	if (!IS_ERR(tsk))
-		return;
-	kfree_skb(skb);
-out:
-	kfree(reply);
+	if (IS_ERR(tsk))
+		goto err;
+
+	return;
+
+err:
+	audit_free_reply(reply);
 }
 
 /*
-- 
2.25.1

[PATCH 5.4 068/261] media: dvb: return -EREMOTEIO on i2c transfer failure.

[Greg Kroah-Hartman]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 96f3a9392799dd0f6472648a7366622ffd0989f3 ]

Currently when i2c transfers fail the error return -EREMOTEIO
is assigned to err but then later overwritten when the tuner
attach call is made.  Fix this by returning early with the
error return code -EREMOTEIO on i2c transfer failure errors.

If the transfer fails, an uninitialized value will be read from b2.

Addresses-Coverity: ("Unused value")

Fixes: fbfee8684ff2 ("V4L/DVB (5651): Dibusb-mb: convert pll handling to properly use dvb-pll")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb/dibusb-mb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/usb/dvb-usb/dibusb-mb.c b/drivers/media/usb/dvb-usb/dibusb-mb.c
index d4ea72bf09c5..5131c8d4c632 100644
--- a/drivers/media/usb/dvb-usb/dibusb-mb.c
+++ b/drivers/media/usb/dvb-usb/dibusb-mb.c
@@ -81,7 +81,7 @@ static int dibusb_tuner_probe_and_attach(struct dvb_usb_adapter *adap)
 
 	if (i2c_transfer(&adap->dev->i2c_adap, msg, 2) != 2) {
 		err("tuner i2c write failed.");
-		ret = -EREMOTEIO;
+		return -EREMOTEIO;
 	}
 
 	if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl)
-- 
2.25.1

[PATCH 5.4 069/261] media: platform: fcp: Set appropriate DMA parameters

[Greg Kroah-Hartman]

From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

[ Upstream commit dd844fb8e50b12e65bbdc5746c9876c6735500df ]

Enabling CONFIG_DMA_API_DEBUG=y and CONFIG_DMA_API_DEBUG_SG=y will
enable extra validation on DMA operations ensuring that the size
restraints are met.

When using the FCP in conjunction with the VSP1/DU, and display frames,
the size of the DMA operations is larger than the default maximum
segment size reported by the DMA core (64K). With the DMA debug enabled,
this produces a warning such as the following:

"DMA-API: rcar-fcp fea27000.fcp: mapping sg segment longer than device
claims to support [len=3145728] [max=65536]"

We have no specific limitation on the segment size which isn't already
handled by the VSP1/DU which actually handles the DMA allcoations and
buffer management, so define a maximum segment size of up to 4GB (a 32
bit mask).

Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: 7b49235e83b2 ("[media] v4l: Add Renesas R-Car FCP driver")
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/rcar-fcp.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/media/platform/rcar-fcp.c b/drivers/media/platform/rcar-fcp.c
index 43c78620c9d8..5c6b00737fe7 100644
--- a/drivers/media/platform/rcar-fcp.c
+++ b/drivers/media/platform/rcar-fcp.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/dma-mapping.h>
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
@@ -21,6 +22,7 @@
 struct rcar_fcp_device {
 	struct list_head list;
 	struct device *dev;
+	struct device_dma_parameters dma_parms;
 };
 
 static LIST_HEAD(fcp_devices);
@@ -136,6 +138,9 @@ static int rcar_fcp_probe(struct platform_device *pdev)
 
 	fcp->dev = &pdev->dev;
 
+	fcp->dev->dma_parms = &fcp->dma_parms;
+	dma_set_max_seg_size(fcp->dev, DMA_BIT_MASK(32));
+
 	pm_runtime_enable(&pdev->dev);
 
 	mutex_lock(&fcp_lock);
-- 
2.25.1

[PATCH 5.4 070/261] MIPS: Make sparse_init() using top-down allocation

[Greg Kroah-Hartman]

From: Tiezhu Yang <yangtiezhu@loongson.cn>

[ Upstream commit 269b3a9ac538c4ae87f84be640b9fa89914a2489 ]

In the current code, if CONFIG_SWIOTLB is set, when failed to get IO TLB
memory from the low pages by plat_swiotlb_setup(), it may lead to the boot
process failed with kernel panic.

(1) On the Loongson and SiByte platform
arch/mips/loongson64/dma.c
arch/mips/sibyte/common/dma.c
void __init plat_swiotlb_setup(void)
{
	swiotlb_init(1);
}

kernel/dma/swiotlb.c
void  __init
swiotlb_init(int verbose)
{
...
	vstart = memblock_alloc_low(PAGE_ALIGN(bytes), PAGE_SIZE);
	if (vstart && !swiotlb_init_with_tbl(vstart, io_tlb_nslabs, verbose))
		return;
...
	pr_warn("Cannot allocate buffer");
	no_iotlb_memory = true;
}

phys_addr_t swiotlb_tbl_map_single()
{
...
	if (no_iotlb_memory)
		panic("Can not allocate SWIOTLB buffer earlier ...");
...
}

(2) On the Cavium OCTEON platform
arch/mips/cavium-octeon/dma-octeon.c
void __init plat_swiotlb_setup(void)
{
...
	octeon_swiotlb = memblock_alloc_low(swiotlbsize, PAGE_SIZE);
	if (!octeon_swiotlb)
		panic("%s: Failed to allocate %zu bytes align=%lx\n",
		      __func__, swiotlbsize, PAGE_SIZE);
...
}

Because IO_TLB_DEFAULT_SIZE is 64M, if the rest size of low memory is less
than 64M when call plat_swiotlb_setup(), we can easily reproduce the panic
case.

In order to reduce the possibility of kernel panic when failed to get IO
TLB memory under CONFIG_SWIOTLB, it is better to allocate low memory as
small as possible before plat_swiotlb_setup(), so make sparse_init() using
top-down allocation.

Reported-by: Juxin Gao <gaojuxin@loongson.cn>
Co-developed-by: Juxin Gao <gaojuxin@loongson.cn>
Signed-off-by: Juxin Gao <gaojuxin@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/kernel/setup.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 5eec13b8d222..7b06e6ee6817 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -653,7 +653,17 @@ static void __init arch_mem_init(char **cmdline_p)
 				 crashk_res.end - crashk_res.start + 1);
 #endif
 	device_tree_init();
+
+	/*
+	 * In order to reduce the possibility of kernel panic when failed to
+	 * get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate
+	 * low memory as small as possible before plat_swiotlb_setup(), so
+	 * make sparse_init() using top-down allocation.
+	 */
+	memblock_set_bottom_up(false);
 	sparse_init();
+	memblock_set_bottom_up(true);
+
 	plat_swiotlb_setup();
 
 	dma_contiguous_reserve(PFN_PHYS(max_low_pfn));
-- 
2.25.1

[PATCH 5.4 071/261] ath10k: add flush tx packets for SDIO chip

[Greg Kroah-Hartman]

From: Wen Gong <wgong@codeaurora.org>

[ Upstream commit dd7fc5545bbafdbd6c1efdc996b61883b285bdc5 ]

When station connected to AP, and run TX traffic such as TCP/UDP, and
system enter suspend state, then mac80211 call ath10k_flush with set
drop flag, recently it only send wmi peer flush to firmware and
firmware will flush all pending TX packets, for PCIe, firmware will
indicate the TX packets status to ath10k, and then ath10k indicate to
mac80211 TX complete with the status, then all the packets has been
flushed at this moment. For SDIO chip, it is different, its TX
complete indication is disabled by default, and it has a tx queue in
ath10k, and its tx credit control is enabled, total tx credit is 96,
when its credit is not sufficient, then the packets will buffered in
the tx queue of ath10k, max packets is TARGET_TLV_NUM_MSDU_DESC_HL
which is 1024, for SDIO, when mac80211 call ath10k_flush with set drop
flag, maybe it have pending packets in tx queue of ath10k, and if it
does not have sufficient tx credit, the packets will stay in queue
untill tx credit report from firmware, if it is a noisy environment,
tx speed is low and the tx credit report from firmware will delay more
time, then the num_pending_tx will remain > 0 untill all packets send
to firmware. After the 1st ath10k_flush, mac80211 will call the 2nd
ath10k_flush without set drop flag immediately, then it will call to
ath10k_mac_wait_tx_complete, and it wait untill num_pending_tx become
to 0, in noisy environment, it is esay to wait about near 5 seconds,
then it cause the suspend take long time.

1st and 2nd callstack of ath10k_flush
[  303.740427] ath10k_sdio mmc1:0001:1: ath10k_flush drop:1, pending:0-0
[  303.740495] ------------[ cut here ]------------
[  303.740739] WARNING: CPU: 1 PID: 3921 at /mnt/host/source/src/third_party/kernel/v4.19/drivers/net/wireless/ath/ath10k/mac.c:7025 ath10k_flush+0x54/0x104 [ath10k_core]
[  303.740757] Modules linked in: bridge stp llc ath10k_sdio ath10k_core rfcomm uinput cros_ec_rpmsg mtk_seninf mtk_cam_isp mtk_vcodec_enc mtk_fd mtk_vcodec_dec mtk_vcodec_common mtk_dip mtk_mdp3 videobuf2_dma_contig videobuf2_memops v4l2_mem2mem videobuf2_v4l2 videobuf2_common hid_google_hammer hci_uart btqca bluetooth dw9768 ov8856 ecdh_generic ov02a10 v4l2_fwnode mtk_scp mtk_rpmsg rpmsg_core mtk_scp_ipi ipt_MASQUERADE fuse iio_trig_sysfs cros_ec_sensors_ring cros_ec_sensors_sync cros_ec_light_prox cros_ec_sensors industrialio_triggered_buffer
[  303.740914]  kfifo_buf cros_ec_activity cros_ec_sensors_core lzo_rle lzo_compress ath mac80211 zram cfg80211 joydev [last unloaded: ath10k_core]
[  303.741009] CPU: 1 PID: 3921 Comm: kworker/u16:10 Tainted: G        W         4.19.95 #2
[  303.741027] Hardware name: MediaTek krane sku176 board (DT)
[  303.741061] Workqueue: events_unbound async_run_entry_fn
[  303.741086] pstate: 60000005 (nZCv daif -PAN -UAO)
[  303.741166] pc : ath10k_flush+0x54/0x104 [ath10k_core]
[  303.741244] lr : ath10k_flush+0x54/0x104 [ath10k_core]
[  303.741260] sp : ffffffdf080e77a0
[  303.741276] x29: ffffffdf080e77a0 x28: ffffffdef3730040
[  303.741300] x27: ffffff907c2240a0 x26: ffffffde6ff39afc
[  303.741321] x25: ffffffdef3730040 x24: ffffff907bf61018
[  303.741343] x23: ffffff907c2240a0 x22: ffffffde6ff39a50
[  303.741364] x21: 0000000000000001 x20: ffffffde6ff39a50
[  303.741385] x19: ffffffde6bac2420 x18: 0000000000017200
[  303.741407] x17: ffffff907c24a000 x16: 0000000000000037
[  303.741428] x15: ffffff907b49a568 x14: ffffff907cf332c1
[  303.741476] x13: 00000000000922e4 x12: 0000000000000000
[  303.741497] x11: 0000000000000001 x10: 0000000000000007
[  303.741518] x9 : f2256b8c1de4bc00 x8 : f2256b8c1de4bc00
[  303.741539] x7 : ffffff907ab5e764 x6 : 0000000000000000
[  303.741560] x5 : 0000000000000080 x4 : 0000000000000001
[  303.741582] x3 : ffffffdf080e74a8 x2 : ffffff907aa91244
[  303.741603] x1 : ffffffdf080e74a8 x0 : 0000000000000024
[  303.741624] Call trace:
[  303.741701]  ath10k_flush+0x54/0x104 [ath10k_core]
[  303.741941]  __ieee80211_flush_queues+0x1dc/0x358 [mac80211]
[  303.742098]  ieee80211_flush_queues+0x34/0x44 [mac80211]
[  303.742253]  ieee80211_set_disassoc+0xc0/0x5ec [mac80211]
[  303.742399]  ieee80211_mgd_deauth+0x720/0x7d4 [mac80211]
[  303.742535]  ieee80211_deauth+0x24/0x30 [mac80211]
[  303.742720]  cfg80211_mlme_deauth+0x250/0x3bc [cfg80211]
[  303.742849]  cfg80211_mlme_down+0x90/0xd0 [cfg80211]
[  303.742971]  cfg80211_disconnect+0x340/0x3a0 [cfg80211]
[  303.743087]  __cfg80211_leave+0xe4/0x17c [cfg80211]
[  303.743203]  cfg80211_leave+0x38/0x50 [cfg80211]
[  303.743319]  wiphy_suspend+0x84/0x5bc [cfg80211]
[  303.743335]  dpm_run_callback+0x170/0x304
[  303.743346]  __device_suspend+0x2dc/0x3e8
[  303.743356]  async_suspend+0x2c/0xb0
[  303.743370]  async_run_entry_fn+0x48/0xf8
[  303.743383]  process_one_work+0x304/0x604
[  303.743394]  worker_thread+0x248/0x3f4
[  303.743403]  kthread+0x120/0x130
[  303.743416]  ret_from_fork+0x10/0x18

[  303.743812] ath10k_sdio mmc1:0001:1: ath10k_flush drop:0, pending:0-0
[  303.743858] ------------[ cut here ]------------
[  303.744057] WARNING: CPU: 1 PID: 3921 at /mnt/host/source/src/third_party/kernel/v4.19/drivers/net/wireless/ath/ath10k/mac.c:7025 ath10k_flush+0x54/0x104 [ath10k_core]
[  303.744075] Modules linked in: bridge stp llc ath10k_sdio ath10k_core rfcomm uinput cros_ec_rpmsg mtk_seninf mtk_cam_isp mtk_vcodec_enc mtk_fd mtk_vcodec_dec mtk_vcodec_common mtk_dip mtk_mdp3 videobuf2_dma_contig videobuf2_memops v4l2_mem2mem videobuf2_v4l2 videobuf2_common hid_google_hammer hci_uart btqca bluetooth dw9768 ov8856 ecdh_generic ov02a10 v4l2_fwnode mtk_scp mtk_rpmsg rpmsg_core mtk_scp_ipi ipt_MASQUERADE fuse iio_trig_sysfs cros_ec_sensors_ring cros_ec_sensors_sync cros_ec_light_prox cros_ec_sensors industrialio_triggered_buffer kfifo_buf cros_ec_activity cros_ec_sensors_core lzo_rle lzo_compress ath mac80211 zram cfg80211 joydev [last unloaded: ath10k_core]
[  303.744256] CPU: 1 PID: 3921 Comm: kworker/u16:10 Tainted: G        W         4.19.95 #2
[  303.744273] Hardware name: MediaTek krane sku176 board (DT)
[  303.744301] Workqueue: events_unbound async_run_entry_fn
[  303.744325] pstate: 60000005 (nZCv daif -PAN -UAO)
[  303.744403] pc : ath10k_flush+0x54/0x104 [ath10k_core]
[  303.744480] lr : ath10k_flush+0x54/0x104 [ath10k_core]
[  303.744496] sp : ffffffdf080e77a0
[  303.744512] x29: ffffffdf080e77a0 x28: ffffffdef3730040
[  303.744534] x27: ffffff907c2240a0 x26: ffffffde6ff39afc
[  303.744556] x25: ffffffdef3730040 x24: ffffff907bf61018
[  303.744577] x23: ffffff907c2240a0 x22: ffffffde6ff39a50
[  303.744598] x21: 0000000000000000 x20: ffffffde6ff39a50
[  303.744620] x19: ffffffde6bac2420 x18: 000000000001831c
[  303.744641] x17: ffffff907c24a000 x16: 0000000000000037
[  303.744662] x15: ffffff907b49a568 x14: ffffff907cf332c1
[  303.744683] x13: 00000000000922ea x12: 0000000000000000
[  303.744704] x11: 0000000000000001 x10: 0000000000000007
[  303.744747] x9 : f2256b8c1de4bc00 x8 : f2256b8c1de4bc00
[  303.744768] x7 : ffffff907ab5e764 x6 : 0000000000000000
[  303.744789] x5 : 0000000000000080 x4 : 0000000000000001
[  303.744810] x3 : ffffffdf080e74a8 x2 : ffffff907aa91244
[  303.744831] x1 : ffffffdf080e74a8 x0 : 0000000000000024
[  303.744853] Call trace:
[  303.744929]  ath10k_flush+0x54/0x104 [ath10k_core]
[  303.745098]  __ieee80211_flush_queues+0x1dc/0x358 [mac80211]
[  303.745277]  ieee80211_flush_queues+0x34/0x44 [mac80211]
[  303.745424]  ieee80211_set_disassoc+0x108/0x5ec [mac80211]
[  303.745569]  ieee80211_mgd_deauth+0x720/0x7d4 [mac80211]
[  303.745706]  ieee80211_deauth+0x24/0x30 [mac80211]
[  303.745853]  cfg80211_mlme_deauth+0x250/0x3bc [cfg80211]
[  303.745979]  cfg80211_mlme_down+0x90/0xd0 [cfg80211]
[  303.746103]  cfg80211_disconnect+0x340/0x3a0 [cfg80211]
[  303.746219]  __cfg80211_leave+0xe4/0x17c [cfg80211]
[  303.746335]  cfg80211_leave+0x38/0x50 [cfg80211]
[  303.746452]  wiphy_suspend+0x84/0x5bc [cfg80211]
[  303.746467]  dpm_run_callback+0x170/0x304
[  303.746477]  __device_suspend+0x2dc/0x3e8
[  303.746487]  async_suspend+0x2c/0xb0
[  303.746498]  async_run_entry_fn+0x48/0xf8
[  303.746510]  process_one_work+0x304/0x604
[  303.746521]  worker_thread+0x248/0x3f4
[  303.746530]  kthread+0x120/0x130
[  303.746542]  ret_from_fork+0x10/0x18

one sample's debugging log: it wait 3190 ms(5000 - 1810).

1st ath10k_flush, it has 120 packets in tx queue of ath10k:
<...>-1513  [000] .... 25374.786005: ath10k_log_err: ath10k_sdio mmc1:0001:1 ath10k_flush drop:1, pending:120-0
<...>-1513  [000] ...1 25374.788375: ath10k_log_warn: ath10k_sdio mmc1:0001:1 ath10k_htt_tx_mgmt_inc_pending htt->num_pending_mgmt_tx:0
<...>-1500  [001] .... 25374.790143: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:121

2st ath10k_flush, it has 121 packets in tx queue of ath10k:
<...>-1513  [000] .... 25374.790571: ath10k_log_err: ath10k_sdio mmc1:0001:1 ath10k_flush drop:0, pending:121-0
<...>-1513  [000] .... 25374.791990: ath10k_log_err: ath10k_sdio mmc1:0001:1 ath10k_mac_wait_tx_complete state:1 pending:121-0
<...>-1508  [001] .... 25374.792696: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:46
<...>-1508  [001] .... 25374.792700: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:46
<...>-1508  [001] .... 25374.792729: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:121
<...>-1508  [001] .... 25374.792937: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:88, count:32, len:49792
<...>-1508  [001] .... 25374.793031: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:75, count:14, len:21784
kworker/u16:0-25773 [003] .... 25374.793701: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:46
<...>-1881  [000] .... 25375.073178: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:24
<...>-1881  [000] .... 25375.073182: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:24
<...>-1881  [000] .... 25375.073429: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:75
<...>-1879  [001] .... 25375.074090: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:24
<...>-1881  [000] .... 25375.074123: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:51, count:24, len:37344
<...>-1879  [001] .... 25375.270126: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:26
<...>-1879  [001] .... 25375.270130: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:26
<...>-1488  [000] .... 25375.270174: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:51
<...>-1488  [000] .... 25375.270529: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:25, count:26, len:40456
<...>-1879  [001] .... 25375.270693: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:26
<...>-1488  [001] .... 25377.775885: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:12
<...>-1488  [001] .... 25377.775890: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:12
<...>-1488  [001] .... 25377.775933: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:25
<...>-1488  [001] .... 25377.776059: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:13, count:12, len:18672
<...>-1879  [001] .... 25377.776100: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:12
<...>-1488  [001] .... 25377.878079: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:15
<...>-1488  [001] .... 25377.878087: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:15
<...>-1879  [000] .... 25377.878323: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:13
<...>-1879  [000] .... 25377.878487: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:0, count:13, len:20228
<...>-1879  [000] .... 25377.878497: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:13
<...>-1488  [001] .... 25377.919927: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:11
<...>-1488  [001] .... 25377.919932: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:13
<...>-1488  [001] .... 25377.919976: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:0
<...>-1881  [000] .... 25377.982645: ath10k_log_warn: ath10k_sdio mmc1:0001:1 HTT_T2H_MSG_TYPE_MGMT_TX_COMPLETION status:0
<...>-1513  [001] .... 25377.982973: ath10k_log_err: ath10k_sdio mmc1:0001:1 ath10k_mac_wait_tx_complete time_left:1810, pending:0-0

Flush all pending TX packets for the 1st ath10k_flush reduced the wait
time of the 2nd ath10k_flush and then suspend take short time.

This Patch only effect SDIO chips.

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00042.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200415233730.10581-1-wgong@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/htt.h    | 7 +++++++
 drivers/net/wireless/ath/ath10k/htt_tx.c | 8 +++++++-
 drivers/net/wireless/ath/ath10k/mac.c    | 1 +
 3 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h
index 30c080094af1..bd5fa4dbab9c 100644
--- a/drivers/net/wireless/ath/ath10k/htt.h
+++ b/drivers/net/wireless/ath/ath10k/htt.h
@@ -2033,6 +2033,7 @@ struct ath10k_htt_tx_ops {
 	int (*htt_h2t_aggr_cfg_msg)(struct ath10k_htt *htt,
 				    u8 max_subfrms_ampdu,
 				    u8 max_subfrms_amsdu);
+	void (*htt_flush_tx)(struct ath10k_htt *htt);
 };
 
 static inline int ath10k_htt_send_rx_ring_cfg(struct ath10k_htt *htt)
@@ -2072,6 +2073,12 @@ static inline int ath10k_htt_tx(struct ath10k_htt *htt,
 	return htt->tx_ops->htt_tx(htt, txmode, msdu);
 }
 
+static inline void ath10k_htt_flush_tx(struct ath10k_htt *htt)
+{
+	if (htt->tx_ops->htt_flush_tx)
+		htt->tx_ops->htt_flush_tx(htt);
+}
+
 static inline int ath10k_htt_alloc_txbuff(struct ath10k_htt *htt)
 {
 	if (!htt->tx_ops->htt_alloc_txbuff)
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index a182c0944cc7..735482877a1f 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -529,9 +529,14 @@ void ath10k_htt_tx_destroy(struct ath10k_htt *htt)
 	htt->tx_mem_allocated = false;
 }
 
-void ath10k_htt_tx_stop(struct ath10k_htt *htt)
+static void ath10k_htt_flush_tx_queue(struct ath10k_htt *htt)
 {
 	idr_for_each(&htt->pending_tx, ath10k_htt_tx_clean_up_pending, htt->ar);
+}
+
+void ath10k_htt_tx_stop(struct ath10k_htt *htt)
+{
+	ath10k_htt_flush_tx_queue(htt);
 	idr_destroy(&htt->pending_tx);
 }
 
@@ -1774,6 +1779,7 @@ static const struct ath10k_htt_tx_ops htt_tx_ops_hl = {
 	.htt_send_frag_desc_bank_cfg = ath10k_htt_send_frag_desc_bank_cfg_32,
 	.htt_tx = ath10k_htt_tx_hl,
 	.htt_h2t_aggr_cfg_msg = ath10k_htt_h2t_aggr_cfg_msg_32,
+	.htt_flush_tx = ath10k_htt_flush_tx_queue,
 };
 
 void ath10k_htt_set_tx_ops(struct ath10k_htt *htt)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index b0f6f2727053..c6ab1fcde84d 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -7082,6 +7082,7 @@ static void ath10k_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 					ath10k_wmi_peer_flush(ar, arvif->vdev_id,
 							      arvif->bssid, bitmap);
 			}
+			ath10k_htt_flush_tx(&ar->htt);
 		}
 		return;
 	}
-- 
2.25.1

[PATCH 5.4 072/261] Bluetooth: btbcm: Add 2 missing models to subver tables

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit c03ee9af4e07112bd3fc688daca9e654f41eca93 ]

Currently the bcm_uart_subver_ and bcm_usb_subver_table-s lack entries
for the BCM4324B5 and BCM20703A1 chipsets. This makes the code use just
"BCM" as prefix for the filename to pass to request-firmware, making it
harder for users to figure out which firmware they need. This especially
is problematic with the UART attached BCM4324B5 where this leads to the
filename being just "BCM.hcd".

Add the 2 missing devices to subver tables. This has been tested on:

1. A Dell XPS15 9550 where this makes btbcm.c try to load
"BCM20703A1-0a5c-6410.hcd" before it tries to load "BCM-0a5c-6410.hcd".

2. A Thinkpad 8 where this makes btbcm.c try to load
"BCM4324B5.hcd" before it tries to load "BCM.hcd"

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btbcm.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index f02a4bdc0ca7..dd29d687cd38 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -329,6 +329,7 @@ static const struct bcm_subver_table bcm_uart_subver_table[] = {
 	{ 0x410e, "BCM43341B0"	},	/* 002.001.014 */
 	{ 0x4204, "BCM2076B1"	},	/* 002.002.004 */
 	{ 0x4406, "BCM4324B3"	},	/* 002.004.006 */
+	{ 0x4606, "BCM4324B5"	},	/* 002.006.006 */
 	{ 0x6109, "BCM4335C0"	},	/* 003.001.009 */
 	{ 0x610c, "BCM4354"	},	/* 003.001.012 */
 	{ 0x2122, "BCM4343A0"	},	/* 001.001.034 */
@@ -343,6 +344,7 @@ static const struct bcm_subver_table bcm_uart_subver_table[] = {
 };
 
 static const struct bcm_subver_table bcm_usb_subver_table[] = {
+	{ 0x2105, "BCM20703A1"	},	/* 001.001.005 */
 	{ 0x210b, "BCM43142A0"	},	/* 001.001.011 */
 	{ 0x2112, "BCM4314A0"	},	/* 001.001.018 */
 	{ 0x2118, "BCM20702A0"	},	/* 001.001.024 */
-- 
2.25.1

[PATCH 5.4 073/261] audit: fix a net reference leak in audit_list_rules_send()

[Greg Kroah-Hartman]

From: Paul Moore <paul@paul-moore.com>

[ Upstream commit 3054d06719079388a543de6adb812638675ad8f5 ]

If audit_list_rules_send() fails when trying to create a new thread
to send the rules it also fails to cleanup properly, leaking a
reference to a net structure.  This patch fixes the error patch and
renames audit_send_list() to audit_send_list_thread() to better
match its cousin, audit_send_reply_thread().

Reported-by: teroincn@gmail.com
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/audit.c       |  2 +-
 kernel/audit.h       |  2 +-
 kernel/auditfilter.c | 16 +++++++---------
 3 files changed, 9 insertions(+), 11 deletions(-)

diff --git a/kernel/audit.c b/kernel/audit.c
index a4eeece2eecd..05ae208ad442 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -879,7 +879,7 @@ main_queue:
 	return 0;
 }
 
-int audit_send_list(void *_dest)
+int audit_send_list_thread(void *_dest)
 {
 	struct audit_netlink_list *dest = _dest;
 	struct sk_buff *skb;
diff --git a/kernel/audit.h b/kernel/audit.h
index 6fb7160412d4..ddc22878433d 100644
--- a/kernel/audit.h
+++ b/kernel/audit.h
@@ -229,7 +229,7 @@ struct audit_netlink_list {
 	struct sk_buff_head q;
 };
 
-int audit_send_list(void *_dest);
+int audit_send_list_thread(void *_dest);
 
 extern int selinux_audit_rule_update(void);
 
diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c
index 026e34da4ace..a10e2997aa6c 100644
--- a/kernel/auditfilter.c
+++ b/kernel/auditfilter.c
@@ -1161,11 +1161,8 @@ int audit_rule_change(int type, int seq, void *data, size_t datasz)
  */
 int audit_list_rules_send(struct sk_buff *request_skb, int seq)
 {
-	u32 portid = NETLINK_CB(request_skb).portid;
-	struct net *net = sock_net(NETLINK_CB(request_skb).sk);
 	struct task_struct *tsk;
 	struct audit_netlink_list *dest;
-	int err = 0;
 
 	/* We can't just spew out the rules here because we might fill
 	 * the available socket buffer space and deadlock waiting for
@@ -1173,25 +1170,26 @@ int audit_list_rules_send(struct sk_buff *request_skb, int seq)
 	 * happen if we're actually running in the context of auditctl
 	 * trying to _send_ the stuff */
 
-	dest = kmalloc(sizeof(struct audit_netlink_list), GFP_KERNEL);
+	dest = kmalloc(sizeof(*dest), GFP_KERNEL);
 	if (!dest)
 		return -ENOMEM;
-	dest->net = get_net(net);
-	dest->portid = portid;
+	dest->net = get_net(sock_net(NETLINK_CB(request_skb).sk));
+	dest->portid = NETLINK_CB(request_skb).portid;
 	skb_queue_head_init(&dest->q);
 
 	mutex_lock(&audit_filter_mutex);
 	audit_list_rules(seq, &dest->q);
 	mutex_unlock(&audit_filter_mutex);
 
-	tsk = kthread_run(audit_send_list, dest, "audit_send_list");
+	tsk = kthread_run(audit_send_list_thread, dest, "audit_send_list");
 	if (IS_ERR(tsk)) {
 		skb_queue_purge(&dest->q);
+		put_net(dest->net);
 		kfree(dest);
-		err = PTR_ERR(tsk);
+		return PTR_ERR(tsk);
 	}
 
-	return err;
+	return 0;
 }
 
 int audit_comparator(u32 left, u32 op, u32 right)
-- 
2.25.1

[PATCH 5.4 074/261] Drivers: hv: vmbus: Always handle the VMBus messages on CPU0

[Greg Kroah-Hartman]

From: Andrea Parri (Microsoft) <parri.andrea@gmail.com>

[ Upstream commit 8a857c55420f29da4fc131adc22b12d474c48f4c ]

A Linux guest have to pick a "connect CPU" to communicate with the
Hyper-V host.  This CPU can not be taken offline because Hyper-V does
not provide a way to change that CPU assignment.

Current code sets the connect CPU to whatever CPU ends up running the
function vmbus_negotiate_version(), and this will generate problems if
that CPU is taken offine.

Establish CPU0 as the connect CPU, and add logics to prevents the
connect CPU from being taken offline.   We could pick some other CPU,
and we could pick that "other CPU" dynamically if there was a reason to
do so at some point in the future.  But for now, #defining the connect
CPU to 0 is the most straightforward and least complex solution.

While on this, add inline comments explaining "why" offer and rescind
messages should not be handled by a same serialized work queue.

Suggested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20200406001514.19876-2-parri.andrea@gmail.com
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hv/connection.c   | 20 +-------------------
 drivers/hv/hv.c           |  7 +++++++
 drivers/hv/hyperv_vmbus.h | 11 ++++++-----
 drivers/hv/vmbus_drv.c    | 20 +++++++++++++++++---
 4 files changed, 31 insertions(+), 27 deletions(-)

diff --git a/drivers/hv/connection.c b/drivers/hv/connection.c
index 6e4c015783ff..c90d79096e8c 100644
--- a/drivers/hv/connection.c
+++ b/drivers/hv/connection.c
@@ -67,7 +67,6 @@ static __u32 vmbus_get_next_version(__u32 current_version)
 int vmbus_negotiate_version(struct vmbus_channel_msginfo *msginfo, u32 version)
 {
 	int ret = 0;
-	unsigned int cur_cpu;
 	struct vmbus_channel_initiate_contact *msg;
 	unsigned long flags;
 
@@ -100,24 +99,7 @@ int vmbus_negotiate_version(struct vmbus_channel_msginfo *msginfo, u32 version)
 
 	msg->monitor_page1 = virt_to_phys(vmbus_connection.monitor_pages[0]);
 	msg->monitor_page2 = virt_to_phys(vmbus_connection.monitor_pages[1]);
-	/*
-	 * We want all channel messages to be delivered on CPU 0.
-	 * This has been the behavior pre-win8. This is not
-	 * perf issue and having all channel messages delivered on CPU 0
-	 * would be ok.
-	 * For post win8 hosts, we support receiving channel messagges on
-	 * all the CPUs. This is needed for kexec to work correctly where
-	 * the CPU attempting to connect may not be CPU 0.
-	 */
-	if (version >= VERSION_WIN8_1) {
-		cur_cpu = get_cpu();
-		msg->target_vcpu = hv_cpu_number_to_vp_number(cur_cpu);
-		vmbus_connection.connect_cpu = cur_cpu;
-		put_cpu();
-	} else {
-		msg->target_vcpu = 0;
-		vmbus_connection.connect_cpu = 0;
-	}
+	msg->target_vcpu = hv_cpu_number_to_vp_number(VMBUS_CONNECT_CPU);
 
 	/*
 	 * Add to list before we send the request since we may
diff --git a/drivers/hv/hv.c b/drivers/hv/hv.c
index fcc52797c169..d6320022af15 100644
--- a/drivers/hv/hv.c
+++ b/drivers/hv/hv.c
@@ -249,6 +249,13 @@ int hv_synic_cleanup(unsigned int cpu)
 	bool channel_found = false;
 	unsigned long flags;
 
+	/*
+	 * Hyper-V does not provide a way to change the connect CPU once
+	 * it is set; we must prevent the connect CPU from going offline.
+	 */
+	if (cpu == VMBUS_CONNECT_CPU)
+		return -EBUSY;
+
 	/*
 	 * Search for channels which are bound to the CPU we're about to
 	 * cleanup. In case we find one and vmbus is still connected we need to
diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h
index af9379a3bf89..cabcb66e7c5e 100644
--- a/drivers/hv/hyperv_vmbus.h
+++ b/drivers/hv/hyperv_vmbus.h
@@ -212,12 +212,13 @@ enum vmbus_connect_state {
 
 #define MAX_SIZE_CHANNEL_MESSAGE	HV_MESSAGE_PAYLOAD_BYTE_COUNT
 
-struct vmbus_connection {
-	/*
-	 * CPU on which the initial host contact was made.
-	 */
-	int connect_cpu;
+/*
+ * The CPU that Hyper-V will interrupt for VMBUS messages, such as
+ * CHANNELMSG_OFFERCHANNEL and CHANNELMSG_RESCIND_CHANNELOFFER.
+ */
+#define VMBUS_CONNECT_CPU	0
 
+struct vmbus_connection {
 	u32 msg_conn_id;
 
 	atomic_t offer_in_progress;
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 9cdd434bb340..160ff640485b 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -1092,14 +1092,28 @@ void vmbus_on_msg_dpc(unsigned long data)
 			/*
 			 * If we are handling the rescind message;
 			 * schedule the work on the global work queue.
+			 *
+			 * The OFFER message and the RESCIND message should
+			 * not be handled by the same serialized work queue,
+			 * because the OFFER handler may call vmbus_open(),
+			 * which tries to open the channel by sending an
+			 * OPEN_CHANNEL message to the host and waits for
+			 * the host's response; however, if the host has
+			 * rescinded the channel before it receives the
+			 * OPEN_CHANNEL message, the host just silently
+			 * ignores the OPEN_CHANNEL message; as a result,
+			 * the guest's OFFER handler hangs for ever, if we
+			 * handle the RESCIND message in the same serialized
+			 * work queue: the RESCIND handler can not start to
+			 * run before the OFFER handler finishes.
 			 */
-			schedule_work_on(vmbus_connection.connect_cpu,
+			schedule_work_on(VMBUS_CONNECT_CPU,
 					 &ctx->work);
 			break;
 
 		case CHANNELMSG_OFFERCHANNEL:
 			atomic_inc(&vmbus_connection.offer_in_progress);
-			queue_work_on(vmbus_connection.connect_cpu,
+			queue_work_on(VMBUS_CONNECT_CPU,
 				      vmbus_connection.work_queue,
 				      &ctx->work);
 			break;
@@ -1146,7 +1160,7 @@ static void vmbus_force_channel_rescinded(struct vmbus_channel *channel)
 
 	INIT_WORK(&ctx->work, vmbus_onmessage_work);
 
-	queue_work_on(vmbus_connection.connect_cpu,
+	queue_work_on(VMBUS_CONNECT_CPU,
 		      vmbus_connection.work_queue,
 		      &ctx->work);
 }
-- 
2.25.1

[PATCH 5.4 075/261] dpaa2-eth: fix return codes used in ndo_setup_tc

[Greg Kroah-Hartman]

From: Jesper Dangaard Brouer <brouer@redhat.com>

[ Upstream commit b89c1e6bdc73f5775e118eb2ab778e75b262b30c ]

Drivers ndo_setup_tc call should return -EOPNOTSUPP, when it cannot
support the qdisc type. Other return values will result in failing the
qdisc setup.  This lead to qdisc noop getting assigned, which will
drop all TX packets on the interface.

Fixes: ab1e6de2bd49 ("dpaa2-eth: Add mqprio support")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
index a935b20effa3..3177dd8ede8e 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
@@ -1981,7 +1981,7 @@ static int dpaa2_eth_setup_tc(struct net_device *net_dev,
 	int i;
 
 	if (type != TC_SETUP_QDISC_MQPRIO)
-		return -EINVAL;
+		return -EOPNOTSUPP;
 
 	mqprio->hw = TC_MQPRIO_HW_OFFLOAD_TCS;
 	num_queues = dpaa2_eth_queue_count(priv);
@@ -1993,7 +1993,7 @@ static int dpaa2_eth_setup_tc(struct net_device *net_dev,
 	if (num_tc  > dpaa2_eth_tc_count(priv)) {
 		netdev_err(net_dev, "Max %d traffic classes supported\n",
 			   dpaa2_eth_tc_count(priv));
-		return -EINVAL;
+		return -EOPNOTSUPP;
 	}
 
 	if (!num_tc) {
-- 
2.25.1

[PATCH 5.4 076/261] netfilter: nft_nat: return EOPNOTSUPP if type or flags are not supported

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit 0d7c83463fdf7841350f37960a7abadd3e650b41 ]

Instead of EINVAL which should be used for malformed netlink messages.

Fixes: eb31628e37a0 ("netfilter: nf_tables: Add support for IPv6 NAT")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_nat.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/netfilter/nft_nat.c b/net/netfilter/nft_nat.c
index c3c93e95b46e..243e8107f456 100644
--- a/net/netfilter/nft_nat.c
+++ b/net/netfilter/nft_nat.c
@@ -129,7 +129,7 @@ static int nft_nat_init(const struct nft_ctx *ctx, const struct nft_expr *expr,
 		priv->type = NF_NAT_MANIP_DST;
 		break;
 	default:
-		return -EINVAL;
+		return -EOPNOTSUPP;
 	}
 
 	if (tb[NFTA_NAT_FAMILY] == NULL)
@@ -196,7 +196,7 @@ static int nft_nat_init(const struct nft_ctx *ctx, const struct nft_expr *expr,
 	if (tb[NFTA_NAT_FLAGS]) {
 		priv->flags = ntohl(nla_get_be32(tb[NFTA_NAT_FLAGS]));
 		if (priv->flags & ~NF_NAT_RANGE_MASK)
-			return -EINVAL;
+			return -EOPNOTSUPP;
 	}
 
 	return nf_ct_netns_get(ctx->net, family);
-- 
2.25.1

[PATCH 5.4 077/261] selftests/bpf: Fix memory leak in extract_build_id()

[Greg Kroah-Hartman]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit 9f56bb531a809ecaa7f0ddca61d2cf3adc1cb81a ]

getline() allocates string, which has to be freed.

Fixes: 81f77fd0deeb ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200429012111.277390-7-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/test_progs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/testing/selftests/bpf/test_progs.c b/tools/testing/selftests/bpf/test_progs.c
index 3bf18364c67c..8cb3469dd11f 100644
--- a/tools/testing/selftests/bpf/test_progs.c
+++ b/tools/testing/selftests/bpf/test_progs.c
@@ -293,6 +293,7 @@ int extract_build_id(char *build_id, size_t size)
 		len = size;
 	memcpy(build_id, line, len);
 	build_id[len] = '\0';
+	free(line);
 	return 0;
 err:
 	fclose(fp);
-- 
2.25.1

[PATCH 5.4 078/261] net: bcmgenet: set Rx mode before starting netif

[Greg Kroah-Hartman]

From: Doug Berger <opendmb@gmail.com>

[ Upstream commit 72f96347628e73dbb61b307f18dd19293cc6792a ]

This commit explicitly calls the bcmgenet_set_rx_mode() function when
the network interface is started. This function is normally called by
ndo_set_rx_mode when the flags are changed, but apparently not when
the driver is suspended and resumed.

This change ensures that address filtering or promiscuous mode are
properly restored by the driver after the MAC may have been reset.

Fixes: b6e978e50444 ("net: bcmgenet: add suspend/resume callbacks")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 6f01f4e03cef..3d3b1005d076 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -69,6 +69,9 @@
 #define GENET_RDMA_REG_OFF	(priv->hw_params->rdma_offset + \
 				TOTAL_DESC * DMA_DESC_SIZE)
 
+/* Forward declarations */
+static void bcmgenet_set_rx_mode(struct net_device *dev);
+
 static inline void bcmgenet_writel(u32 value, void __iomem *offset)
 {
 	/* MIPS chips strapped for BE will automagically configure the
@@ -2852,6 +2855,7 @@ static void bcmgenet_netif_start(struct net_device *dev)
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 
 	/* Start the network engine */
+	bcmgenet_set_rx_mode(dev);
 	bcmgenet_enable_rx_napi(priv);
 
 	umac_enable_set(priv, CMD_TX_EN | CMD_RX_EN, true);
-- 
2.25.1

[PATCH 5.4 079/261] net: bcmgenet: Fix WoL with password after deep sleep

[Greg Kroah-Hartman]

From: Doug Berger <opendmb@gmail.com>

[ Upstream commit 6f7689057a0f10a6c967b9f2759d7a3dc948b930 ]

Broadcom STB chips support a deep sleep mode where all register contents
are lost. Because we were stashing the MagicPacket password into some of
these registers a suspend into that deep sleep then a resumption would
not lead to being able to wake-up from MagicPacket with password again.

Fix this by keeping a software copy of the password and program it
during suspend.

Fixes: c51de7f3976b ("net: bcmgenet: add Wake-on-LAN support code")
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/broadcom/genet/bcmgenet.h    |  2 +
 .../ethernet/broadcom/genet/bcmgenet_wol.c    | 39 +++++++++----------
 2 files changed, 20 insertions(+), 21 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
index dbc69d8fa05f..5b7c2f9241d0 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
@@ -14,6 +14,7 @@
 #include <linux/if_vlan.h>
 #include <linux/phy.h>
 #include <linux/dim.h>
+#include <linux/ethtool.h>
 
 /* total number of Buffer Descriptors, same for Rx/Tx */
 #define TOTAL_DESC				256
@@ -674,6 +675,7 @@ struct bcmgenet_priv {
 	/* WOL */
 	struct clk *clk_wol;
 	u32 wolopts;
+	u8 sopass[SOPASS_MAX];
 
 	struct bcmgenet_mib_counters mib;
 
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
index ea20d94bd050..a41f82379369 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
@@ -41,18 +41,13 @@
 void bcmgenet_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
 	struct bcmgenet_priv *priv = netdev_priv(dev);
-	u32 reg;
 
 	wol->supported = WAKE_MAGIC | WAKE_MAGICSECURE;
 	wol->wolopts = priv->wolopts;
 	memset(wol->sopass, 0, sizeof(wol->sopass));
 
-	if (wol->wolopts & WAKE_MAGICSECURE) {
-		reg = bcmgenet_umac_readl(priv, UMAC_MPD_PW_MS);
-		put_unaligned_be16(reg, &wol->sopass[0]);
-		reg = bcmgenet_umac_readl(priv, UMAC_MPD_PW_LS);
-		put_unaligned_be32(reg, &wol->sopass[2]);
-	}
+	if (wol->wolopts & WAKE_MAGICSECURE)
+		memcpy(wol->sopass, priv->sopass, sizeof(priv->sopass));
 }
 
 /* ethtool function - set WOL (Wake on LAN) settings.
@@ -62,7 +57,6 @@ int bcmgenet_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 	struct device *kdev = &priv->pdev->dev;
-	u32 reg;
 
 	if (!device_can_wakeup(kdev))
 		return -ENOTSUPP;
@@ -70,17 +64,8 @@ int bcmgenet_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 	if (wol->wolopts & ~(WAKE_MAGIC | WAKE_MAGICSECURE))
 		return -EINVAL;
 
-	reg = bcmgenet_umac_readl(priv, UMAC_MPD_CTRL);
-	if (wol->wolopts & WAKE_MAGICSECURE) {
-		bcmgenet_umac_writel(priv, get_unaligned_be16(&wol->sopass[0]),
-				     UMAC_MPD_PW_MS);
-		bcmgenet_umac_writel(priv, get_unaligned_be32(&wol->sopass[2]),
-				     UMAC_MPD_PW_LS);
-		reg |= MPD_PW_EN;
-	} else {
-		reg &= ~MPD_PW_EN;
-	}
-	bcmgenet_umac_writel(priv, reg, UMAC_MPD_CTRL);
+	if (wol->wolopts & WAKE_MAGICSECURE)
+		memcpy(priv->sopass, wol->sopass, sizeof(priv->sopass));
 
 	/* Flag the device and relevant IRQ as wakeup capable */
 	if (wol->wolopts) {
@@ -120,6 +105,14 @@ static int bcmgenet_poll_wol_status(struct bcmgenet_priv *priv)
 	return retries;
 }
 
+static void bcmgenet_set_mpd_password(struct bcmgenet_priv *priv)
+{
+	bcmgenet_umac_writel(priv, get_unaligned_be16(&priv->sopass[0]),
+			     UMAC_MPD_PW_MS);
+	bcmgenet_umac_writel(priv, get_unaligned_be32(&priv->sopass[2]),
+			     UMAC_MPD_PW_LS);
+}
+
 int bcmgenet_wol_power_down_cfg(struct bcmgenet_priv *priv,
 				enum bcmgenet_power_mode mode)
 {
@@ -140,13 +133,17 @@ int bcmgenet_wol_power_down_cfg(struct bcmgenet_priv *priv,
 
 	reg = bcmgenet_umac_readl(priv, UMAC_MPD_CTRL);
 	reg |= MPD_EN;
+	if (priv->wolopts & WAKE_MAGICSECURE) {
+		bcmgenet_set_mpd_password(priv);
+		reg |= MPD_PW_EN;
+	}
 	bcmgenet_umac_writel(priv, reg, UMAC_MPD_CTRL);
 
 	/* Do not leave UniMAC in MPD mode only */
 	retries = bcmgenet_poll_wol_status(priv);
 	if (retries < 0) {
 		reg = bcmgenet_umac_readl(priv, UMAC_MPD_CTRL);
-		reg &= ~MPD_EN;
+		reg &= ~(MPD_EN | MPD_PW_EN);
 		bcmgenet_umac_writel(priv, reg, UMAC_MPD_CTRL);
 		return retries;
 	}
@@ -185,7 +182,7 @@ void bcmgenet_wol_power_up_cfg(struct bcmgenet_priv *priv,
 	reg = bcmgenet_umac_readl(priv, UMAC_MPD_CTRL);
 	if (!(reg & MPD_EN))
 		return;	/* already powered up so skip the rest */
-	reg &= ~MPD_EN;
+	reg &= ~(MPD_EN | MPD_PW_EN);
 	bcmgenet_umac_writel(priv, reg, UMAC_MPD_CTRL);
 
 	/* Disable CRC Forward */
-- 
2.25.1

[PATCH 5.4 080/261] lib/mpi: Fix 64-bit MIPS build with Clang

[Greg Kroah-Hartman]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 18f1ca46858eac22437819937ae44aa9a8f9f2fa ]

When building 64r6_defconfig with CONFIG_MIPS32_O32 disabled and
CONFIG_CRYPTO_RSA enabled:

lib/mpi/generic_mpih-mul1.c:37:24: error: invalid use of a cast in a
inline asm context requiring an l-value: remove the cast
or build with -fheinous-gnu-extensions
                umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb);
                ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/mpi/longlong.h:664:22: note: expanded from macro 'umul_ppmm'
                 : "=d" ((UDItype)(w0))
                         ~~~~~~~~~~^~~
lib/mpi/generic_mpih-mul1.c:37:13: error: invalid use of a cast in a
inline asm context requiring an l-value: remove the cast
or build with -fheinous-gnu-extensions
                umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb);
                ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/mpi/longlong.h:668:22: note: expanded from macro 'umul_ppmm'
                 : "=d" ((UDItype)(w1))
                         ~~~~~~~~~~^~~
2 errors generated.

This special case for umul_ppmm for MIPS64r6 was added in
commit bbc25bee37d2b ("lib/mpi: Fix umul_ppmm() for MIPS64r6"), due to
GCC being inefficient and emitting a __multi3 intrinsic.

There is no such issue with clang; with this patch applied, I can build
this configuration without any problems and there are no link errors
like mentioned in the commit above (which I can still reproduce with
GCC 9.3.0 when that commit is reverted). Only use this definition when
GCC is being used.

This really should have been caught by commit b0c091ae04f67 ("lib/mpi:
Eliminate unused umul_ppmm definitions for MIPS") when I was messing
around in this area but I was not testing 64-bit MIPS at the time.

Link: https://github.com/ClangBuiltLinux/linux/issues/885
Reported-by: Dmitry Golovin <dima@golovin.in>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/mpi/longlong.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/mpi/longlong.h b/lib/mpi/longlong.h
index 891e1c3549c4..afbd99987cf8 100644
--- a/lib/mpi/longlong.h
+++ b/lib/mpi/longlong.h
@@ -653,7 +653,7 @@ do {						\
 	**************  MIPS/64  **************
 	***************************************/
 #if (defined(__mips) && __mips >= 3) && W_TYPE_SIZE == 64
-#if defined(__mips_isa_rev) && __mips_isa_rev >= 6
+#if defined(__mips_isa_rev) && __mips_isa_rev >= 6 && defined(CONFIG_CC_IS_GCC)
 /*
  * GCC ends up emitting a __multi3 intrinsic call for MIPS64r6 with the plain C
  * code below, so we special case MIPS64r6 until the compiler can do better.
-- 
2.25.1

[PATCH 5.4 081/261] exit: Move preemption fixup up, move blocking operations down

[Greg Kroah-Hartman]

From: Jann Horn <jannh@google.com>

[ Upstream commit 586b58cac8b4683eb58a1446fbc399de18974e40 ]

With CONFIG_DEBUG_ATOMIC_SLEEP=y and CONFIG_CGROUPS=y, kernel oopses in
non-preemptible context look untidy; after the main oops, the kernel prints
a "sleeping function called from invalid context" report because
exit_signals() -> cgroup_threadgroup_change_begin() -> percpu_down_read()
can sleep, and that happens before the preempt_count_set(PREEMPT_ENABLED)
fixup.

It looks like the same thing applies to profile_task_exit() and
kcov_task_exit().

Fix it by moving the preemption fixup up and the calls to
profile_task_exit() and kcov_task_exit() down.

Fixes: 1dc0fffc48af ("sched/core: Robustify preemption leak checks")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200305220657.46800-1-jannh@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/exit.c | 25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)

diff --git a/kernel/exit.c b/kernel/exit.c
index 22dfaac9e48c..fa46977b9c07 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -713,8 +713,12 @@ void __noreturn do_exit(long code)
 	struct task_struct *tsk = current;
 	int group_dead;
 
-	profile_task_exit(tsk);
-	kcov_task_exit(tsk);
+	/*
+	 * We can get here from a kernel oops, sometimes with preemption off.
+	 * Start by checking for critical errors.
+	 * Then fix up important state like USER_DS and preemption.
+	 * Then do everything else.
+	 */
 
 	WARN_ON(blk_needs_flush_plug(tsk));
 
@@ -732,6 +736,16 @@ void __noreturn do_exit(long code)
 	 */
 	set_fs(USER_DS);
 
+	if (unlikely(in_atomic())) {
+		pr_info("note: %s[%d] exited with preempt_count %d\n",
+			current->comm, task_pid_nr(current),
+			preempt_count());
+		preempt_count_set(PREEMPT_ENABLED);
+	}
+
+	profile_task_exit(tsk);
+	kcov_task_exit(tsk);
+
 	ptrace_event(PTRACE_EVENT_EXIT, code);
 
 	validate_creds_for_do_exit(tsk);
@@ -749,13 +763,6 @@ void __noreturn do_exit(long code)
 
 	exit_signals(tsk);  /* sets PF_EXITING */
 
-	if (unlikely(in_atomic())) {
-		pr_info("note: %s[%d] exited with preempt_count %d\n",
-			current->comm, task_pid_nr(current),
-			preempt_count());
-		preempt_count_set(PREEMPT_ENABLED);
-	}
-
 	/* sync mm's RSS info before statistics gathering */
 	if (tsk->mm)
 		sync_mm_rss(tsk->mm);
-- 
2.25.1

[PATCH 5.4 082/261] sched/core: Fix illegal RCU from offline CPUs

[Greg Kroah-Hartman]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit bf2c59fce4074e55d622089b34be3a6bc95484fb ]

In the CPU-offline process, it calls mmdrop() after idle entry and the
subsequent call to cpuhp_report_idle_dead(). Once execution passes the
call to rcu_report_dead(), RCU is ignoring the CPU, which results in
lockdep complaining when mmdrop() uses RCU from either memcg or
debugobjects below.

Fix it by cleaning up the active_mm state from BP instead. Every arch
which has CONFIG_HOTPLUG_CPU should have already called idle_task_exit()
from AP. The only exception is parisc because it switches them to
&init_mm unconditionally (see smp_boot_one_cpu() and smp_cpu_init()),
but the patch will still work there because it calls mmgrab(&init_mm) in
smp_cpu_init() and then should call mmdrop(&init_mm) in finish_cpu().

  WARNING: suspicious RCU usage
  -----------------------------
  kernel/workqueue.c:710 RCU or wq_pool_mutex should be held!

  other info that might help us debug this:

  RCU used illegally from offline CPU!
  Call Trace:
   dump_stack+0xf4/0x164 (unreliable)
   lockdep_rcu_suspicious+0x140/0x164
   get_work_pool+0x110/0x150
   __queue_work+0x1bc/0xca0
   queue_work_on+0x114/0x120
   css_release+0x9c/0xc0
   percpu_ref_put_many+0x204/0x230
   free_pcp_prepare+0x264/0x570
   free_unref_page+0x38/0xf0
   __mmdrop+0x21c/0x2c0
   idle_task_exit+0x170/0x1b0
   pnv_smp_cpu_kill_self+0x38/0x2e0
   cpu_die+0x48/0x64
   arch_cpu_idle_dead+0x30/0x50
   do_idle+0x2f4/0x470
   cpu_startup_entry+0x38/0x40
   start_secondary+0x7a8/0xa80
   start_secondary_resume+0x10/0x14

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lkml.kernel.org/r/20200401214033.8448-1-cai@lca.pw
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/powernv/smp.c |  1 -
 include/linux/sched/mm.h             |  2 ++
 kernel/cpu.c                         | 18 +++++++++++++++++-
 kernel/sched/core.c                  |  5 +++--
 4 files changed, 22 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
index 13e251699346..b2ba3e95bda7 100644
--- a/arch/powerpc/platforms/powernv/smp.c
+++ b/arch/powerpc/platforms/powernv/smp.c
@@ -167,7 +167,6 @@ static void pnv_smp_cpu_kill_self(void)
 	/* Standard hot unplug procedure */
 
 	idle_task_exit();
-	current->active_mm = NULL; /* for sanity */
 	cpu = smp_processor_id();
 	DBG("CPU%d offline\n", cpu);
 	generic_set_cpu_dead(cpu);
diff --git a/include/linux/sched/mm.h b/include/linux/sched/mm.h
index c49257a3b510..a132d875d351 100644
--- a/include/linux/sched/mm.h
+++ b/include/linux/sched/mm.h
@@ -49,6 +49,8 @@ static inline void mmdrop(struct mm_struct *mm)
 		__mmdrop(mm);
 }
 
+void mmdrop(struct mm_struct *mm);
+
 /*
  * This has to be called after a get_task_mm()/mmget_not_zero()
  * followed by taking the mmap_sem for writing before modifying the
diff --git a/kernel/cpu.c b/kernel/cpu.c
index d7890c1285bf..7527825ac7da 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -3,6 +3,7 @@
  *
  * This code is licenced under the GPL.
  */
+#include <linux/sched/mm.h>
 #include <linux/proc_fs.h>
 #include <linux/smp.h>
 #include <linux/init.h>
@@ -564,6 +565,21 @@ static int bringup_cpu(unsigned int cpu)
 	return bringup_wait_for_ap(cpu);
 }
 
+static int finish_cpu(unsigned int cpu)
+{
+	struct task_struct *idle = idle_thread_get(cpu);
+	struct mm_struct *mm = idle->active_mm;
+
+	/*
+	 * idle_task_exit() will have switched to &init_mm, now
+	 * clean up any remaining active_mm state.
+	 */
+	if (mm != &init_mm)
+		idle->active_mm = &init_mm;
+	mmdrop(mm);
+	return 0;
+}
+
 /*
  * Hotplug state machine related functions
  */
@@ -1434,7 +1450,7 @@ static struct cpuhp_step cpuhp_hp_states[] = {
 	[CPUHP_BRINGUP_CPU] = {
 		.name			= "cpu:bringup",
 		.startup.single		= bringup_cpu,
-		.teardown.single	= NULL,
+		.teardown.single	= finish_cpu,
 		.cant_stop		= true,
 	},
 	/* Final state before CPU kills itself */
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index e99d326fa569..4874e1468279 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -6177,13 +6177,14 @@ void idle_task_exit(void)
 	struct mm_struct *mm = current->active_mm;
 
 	BUG_ON(cpu_online(smp_processor_id()));
+	BUG_ON(current != this_rq()->idle);
 
 	if (mm != &init_mm) {
 		switch_mm(mm, &init_mm, current);
-		current->active_mm = &init_mm;
 		finish_arch_post_lock_switch();
 	}
-	mmdrop(mm);
+
+	/* finish_cpu(), as ran on the BP, will clean up the active_mm state */
 }
 
 /*
-- 
2.25.1

[PATCH 5.4 083/261] drivers/perf: hisi: Fix typo in events attribute array

[Greg Kroah-Hartman]

From: Shaokun Zhang <zhangshaokun@hisilicon.com>

[ Upstream commit 88562f06ebf56587788783e5420f25fde3ca36c8 ]

Fix up one typo: wr_dr_64b -> wr_ddr_64b.

Fixes: 2bab3cf9104c ("perf: hisi: Add support for HiSilicon SoC HHA PMU driver")
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1587643530-34357-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/perf/hisilicon/hisi_uncore_hha_pmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c b/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c
index f28063873e11..0d6325d6a4ec 100644
--- a/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c
+++ b/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c
@@ -285,7 +285,7 @@ static struct attribute *hisi_hha_pmu_events_attr[] = {
 	HISI_PMU_EVENT_ATTR(rx_wbip,		0x05),
 	HISI_PMU_EVENT_ATTR(rx_wtistash,	0x11),
 	HISI_PMU_EVENT_ATTR(rd_ddr_64b,		0x1c),
-	HISI_PMU_EVENT_ATTR(wr_dr_64b,		0x1d),
+	HISI_PMU_EVENT_ATTR(wr_ddr_64b,		0x1d),
 	HISI_PMU_EVENT_ATTR(rd_ddr_128b,	0x1e),
 	HISI_PMU_EVENT_ATTR(wr_ddr_128b,	0x1f),
 	HISI_PMU_EVENT_ATTR(spill_num,		0x20),
-- 
2.25.1

[PATCH 5.4 084/261] iocost_monitor: drop string wrap around numbers when outputting json

[Greg Kroah-Hartman]

From: Tejun Heo <tj@kernel.org>

[ Upstream commit 21f3cfeab304fc07b90d93d98d4d2f62110fe6b2 ]

Wrapping numbers in strings is used by some to work around bit-width issues in
some enviroments. The problem isn't innate to json and the workaround seems to
cause more integration problems than help. Let's drop the string wrapping.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/cgroup/iocost_monitor.py | 42 +++++++++++++++++-----------------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/tools/cgroup/iocost_monitor.py b/tools/cgroup/iocost_monitor.py
index 7e344a78a627..b8c082c9fd7d 100644
--- a/tools/cgroup/iocost_monitor.py
+++ b/tools/cgroup/iocost_monitor.py
@@ -112,14 +112,14 @@ class IocStat:
 
     def dict(self, now):
         return { 'device'               : devname,
-                 'timestamp'            : str(now),
-                 'enabled'              : str(int(self.enabled)),
-                 'running'              : str(int(self.running)),
-                 'period_ms'            : str(self.period_ms),
-                 'period_at'            : str(self.period_at),
-                 'period_vtime_at'      : str(self.vperiod_at),
-                 'busy_level'           : str(self.busy_level),
-                 'vrate_pct'            : str(self.vrate_pct), }
+                 'timestamp'            : now,
+                 'enabled'              : self.enabled,
+                 'running'              : self.running,
+                 'period_ms'            : self.period_ms,
+                 'period_at'            : self.period_at,
+                 'period_vtime_at'      : self.vperiod_at,
+                 'busy_level'           : self.busy_level,
+                 'vrate_pct'            : self.vrate_pct, }
 
     def table_preamble_str(self):
         state = ('RUN' if self.running else 'IDLE') if self.enabled else 'OFF'
@@ -179,19 +179,19 @@ class IocgStat:
 
     def dict(self, now, path):
         out = { 'cgroup'                : path,
-                'timestamp'             : str(now),
-                'is_active'             : str(int(self.is_active)),
-                'weight'                : str(self.weight),
-                'weight_active'         : str(self.active),
-                'weight_inuse'          : str(self.inuse),
-                'hweight_active_pct'    : str(self.hwa_pct),
-                'hweight_inuse_pct'     : str(self.hwi_pct),
-                'inflight_pct'          : str(self.inflight_pct),
-                'debt_ms'               : str(self.debt_ms),
-                'use_delay'             : str(self.use_delay),
-                'delay_ms'              : str(self.delay_ms),
-                'usage_pct'             : str(self.usage),
-                'address'               : str(hex(self.address)) }
+                'timestamp'             : now,
+                'is_active'             : self.is_active,
+                'weight'                : self.weight,
+                'weight_active'         : self.active,
+                'weight_inuse'          : self.inuse,
+                'hweight_active_pct'    : self.hwa_pct,
+                'hweight_inuse_pct'     : self.hwi_pct,
+                'inflight_pct'          : self.inflight_pct,
+                'debt_ms'               : self.debt_ms,
+                'use_delay'             : self.use_delay,
+                'delay_ms'              : self.delay_ms,
+                'usage_pct'             : self.usage,
+                'address'               : self.address }
         for i in range(len(self.usages)):
             out[f'usage_pct_{i}'] = str(self.usages[i])
         return out
-- 
2.25.1

[PATCH 5.4 085/261] net: lpc-enet: fix error return code in lpc_mii_init()

[Greg Kroah-Hartman]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit 88ec7cb22ddde725ed4ce15991f0bd9dd817fd85 ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: b7370112f519 ("lpc32xx: Added ethernet driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/nxp/lpc_eth.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c
index 544012a67221..1d59ef367a85 100644
--- a/drivers/net/ethernet/nxp/lpc_eth.c
+++ b/drivers/net/ethernet/nxp/lpc_eth.c
@@ -815,7 +815,8 @@ static int lpc_mii_init(struct netdata_local *pldat)
 	if (mdiobus_register(pldat->mii_bus))
 		goto err_out_unregister_bus;
 
-	if (lpc_mii_probe(pldat->ndev) != 0)
+	err = lpc_mii_probe(pldat->ndev);
+	if (err)
 		goto err_out_unregister_bus;
 
 	return 0;
-- 
2.25.1

[PATCH 5.4 086/261] selinux: fix error return code in policydb_read()

[Greg Kroah-Hartman]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit 4c09f8b6913a779ca0c70ea8058bf21537eebb3b ]

Fix to return negative error code -ENOMEM from the kvcalloc() error
handling case instead of 0, as done elsewhere in this function.

Fixes: acdf52d97f82 ("selinux: convert to kvmalloc")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/selinux/ss/policydb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/security/selinux/ss/policydb.c b/security/selinux/ss/policydb.c
index 1260f5fb766e..dd7aabd94a92 100644
--- a/security/selinux/ss/policydb.c
+++ b/security/selinux/ss/policydb.c
@@ -2496,6 +2496,7 @@ int policydb_read(struct policydb *p, void *fp)
 	if (rc)
 		goto bad;
 
+	rc = -ENOMEM;
 	p->type_attr_map_array = kvcalloc(p->p_types.nprim,
 					  sizeof(*p->type_attr_map_array),
 					  GFP_KERNEL);
-- 
2.25.1

[PATCH 5.4 087/261] drivers: net: davinci_mdio: fix potential NULL dereference in davinci_mdio_probe()

[Greg Kroah-Hartman]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit e00edb4efbbc07425441a3be2aa87abaf5800d96 ]

platform_get_resource() may fail and return NULL, so we should
better check it's return value to avoid a NULL pointer dereference
since devm_ioremap() does not check input parameters for null.

This is detected by Coccinelle semantic patch.

@@
expression pdev, res, n, t, e, e1, e2;
@@

res = \(platform_get_resource\|platform_get_resource_byname\)(pdev, t, n);
+ if (!res)
+   return -EINVAL;
... when != res == NULL
e = devm_ioremap(e1, res->start, e2);

Fixes: 03f66f067560 ("net: ethernet: ti: davinci_mdio: use devm_ioremap()")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ti/davinci_mdio.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c
index 38b7f6d35759..702fdc393da0 100644
--- a/drivers/net/ethernet/ti/davinci_mdio.c
+++ b/drivers/net/ethernet/ti/davinci_mdio.c
@@ -397,6 +397,8 @@ static int davinci_mdio_probe(struct platform_device *pdev)
 	data->dev = dev;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EINVAL;
 	data->regs = devm_ioremap(dev, res->start, resource_size(res));
 	if (!data->regs)
 		return -ENOMEM;
-- 
2.25.1

[PATCH 5.4 088/261] media: cec: silence shift wrapping warning in __cec_s_log_addrs()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 3b5af3171e2d5a73ae6f04965ed653d039904eb6 ]

The log_addrs->log_addr_type[i] value is a u8 which is controlled by
the user and comes from the ioctl.  If it's over 31 then that results in
undefined behavior (shift wrapping) and that leads to a Smatch static
checker warning.  We already cap the value later so we can silence the
warning just by re-ordering the existing checks.

I think the UBSan checker will also catch this bug at runtime and
generate a warning.  But otherwise the bug is harmless.

Fixes: 9881fe0ca187 ("[media] cec: add HDMI CEC framework (adapter)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/cec/cec-adap.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/media/cec/cec-adap.c b/drivers/media/cec/cec-adap.c
index b14c09cd9593..06383b26712b 100644
--- a/drivers/media/cec/cec-adap.c
+++ b/drivers/media/cec/cec-adap.c
@@ -1732,6 +1732,10 @@ int __cec_s_log_addrs(struct cec_adapter *adap,
 		unsigned j;
 
 		log_addrs->log_addr[i] = CEC_LOG_ADDR_INVALID;
+		if (log_addrs->log_addr_type[i] > CEC_LOG_ADDR_TYPE_UNREGISTERED) {
+			dprintk(1, "unknown logical address type\n");
+			return -EINVAL;
+		}
 		if (type_mask & (1 << log_addrs->log_addr_type[i])) {
 			dprintk(1, "duplicate logical address type\n");
 			return -EINVAL;
@@ -1752,10 +1756,6 @@ int __cec_s_log_addrs(struct cec_adapter *adap,
 			dprintk(1, "invalid primary device type\n");
 			return -EINVAL;
 		}
-		if (log_addrs->log_addr_type[i] > CEC_LOG_ADDR_TYPE_UNREGISTERED) {
-			dprintk(1, "unknown logical address type\n");
-			return -EINVAL;
-		}
 		for (j = 0; j < feature_sz; j++) {
 			if ((features[j] & 0x80) == 0) {
 				if (op_is_dev_features)
-- 
2.25.1

[PATCH 5.4 089/261] net: allwinner: Fix use correct return type for ndo_start_xmit()

[Greg Kroah-Hartman]

From: Yunjian Wang <wangyunjian@huawei.com>

[ Upstream commit 09f6c44aaae0f1bdb8b983d7762676d5018c53bc ]

The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix
the ndo function to use the correct type. And emac_start_xmit() can
leak one skb if 'channel' == 3.

Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/allwinner/sun4i-emac.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c
index 0537df06a9b5..ff318472a3ee 100644
--- a/drivers/net/ethernet/allwinner/sun4i-emac.c
+++ b/drivers/net/ethernet/allwinner/sun4i-emac.c
@@ -432,7 +432,7 @@ static void emac_timeout(struct net_device *dev)
 /* Hardware start transmission.
  * Send a packet to media from the upper layer.
  */
-static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t emac_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct emac_board_info *db = netdev_priv(dev);
 	unsigned long channel;
@@ -440,7 +440,7 @@ static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	channel = db->tx_fifo_stat & 3;
 	if (channel == 3)
-		return 1;
+		return NETDEV_TX_BUSY;
 
 	channel = (channel == 1 ? 1 : 0);
 
-- 
2.25.1

[PATCH 5.4 090/261] powerpc/spufs: fix copy_to_user while atomic

[Greg Kroah-Hartman]

From: Jeremy Kerr <jk@ozlabs.org>

[ Upstream commit 88413a6bfbbe2f648df399b62f85c934460b7a4d ]

Currently, we may perform a copy_to_user (through
simple_read_from_buffer()) while holding a context's register_lock,
while accessing the context save area.

This change uses a temporary buffer for the context save area data,
which we then pass to simple_read_from_buffer.

Includes changes from Christoph Hellwig <hch@lst.de>.

Fixes: bf1ab978be23 ("[POWERPC] coredump: Add SPU elf notes to coredump.")
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
[hch: renamed to function to avoid ___-prefixes]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/cell/spufs/file.c | 113 +++++++++++++++--------
 1 file changed, 75 insertions(+), 38 deletions(-)

diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index c0f950a3f4e1..f4a4dfb191e7 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -1978,8 +1978,9 @@ static ssize_t __spufs_mbox_info_read(struct spu_context *ctx,
 static ssize_t spufs_mbox_info_read(struct file *file, char __user *buf,
 				   size_t len, loff_t *pos)
 {
-	int ret;
 	struct spu_context *ctx = file->private_data;
+	u32 stat, data;
+	int ret;
 
 	if (!access_ok(buf, len))
 		return -EFAULT;
@@ -1988,11 +1989,16 @@ static ssize_t spufs_mbox_info_read(struct file *file, char __user *buf,
 	if (ret)
 		return ret;
 	spin_lock(&ctx->csa.register_lock);
-	ret = __spufs_mbox_info_read(ctx, buf, len, pos);
+	stat = ctx->csa.prob.mb_stat_R;
+	data = ctx->csa.prob.pu_mb_R;
 	spin_unlock(&ctx->csa.register_lock);
 	spu_release_saved(ctx);
 
-	return ret;
+	/* EOF if there's no entry in the mbox */
+	if (!(stat & 0x0000ff))
+		return 0;
+
+	return simple_read_from_buffer(buf, len, pos, &data, sizeof(data));
 }
 
 static const struct file_operations spufs_mbox_info_fops = {
@@ -2019,6 +2025,7 @@ static ssize_t spufs_ibox_info_read(struct file *file, char __user *buf,
 				   size_t len, loff_t *pos)
 {
 	struct spu_context *ctx = file->private_data;
+	u32 stat, data;
 	int ret;
 
 	if (!access_ok(buf, len))
@@ -2028,11 +2035,16 @@ static ssize_t spufs_ibox_info_read(struct file *file, char __user *buf,
 	if (ret)
 		return ret;
 	spin_lock(&ctx->csa.register_lock);
-	ret = __spufs_ibox_info_read(ctx, buf, len, pos);
+	stat = ctx->csa.prob.mb_stat_R;
+	data = ctx->csa.priv2.puint_mb_R;
 	spin_unlock(&ctx->csa.register_lock);
 	spu_release_saved(ctx);
 
-	return ret;
+	/* EOF if there's no entry in the ibox */
+	if (!(stat & 0xff0000))
+		return 0;
+
+	return simple_read_from_buffer(buf, len, pos, &data, sizeof(data));
 }
 
 static const struct file_operations spufs_ibox_info_fops = {
@@ -2041,6 +2053,11 @@ static const struct file_operations spufs_ibox_info_fops = {
 	.llseek  = generic_file_llseek,
 };
 
+static size_t spufs_wbox_info_cnt(struct spu_context *ctx)
+{
+	return (4 - ((ctx->csa.prob.mb_stat_R & 0x00ff00) >> 8)) * sizeof(u32);
+}
+
 static ssize_t __spufs_wbox_info_read(struct spu_context *ctx,
 			char __user *buf, size_t len, loff_t *pos)
 {
@@ -2049,7 +2066,7 @@ static ssize_t __spufs_wbox_info_read(struct spu_context *ctx,
 	u32 wbox_stat;
 
 	wbox_stat = ctx->csa.prob.mb_stat_R;
-	cnt = 4 - ((wbox_stat & 0x00ff00) >> 8);
+	cnt = spufs_wbox_info_cnt(ctx);
 	for (i = 0; i < cnt; i++) {
 		data[i] = ctx->csa.spu_mailbox_data[i];
 	}
@@ -2062,7 +2079,8 @@ static ssize_t spufs_wbox_info_read(struct file *file, char __user *buf,
 				   size_t len, loff_t *pos)
 {
 	struct spu_context *ctx = file->private_data;
-	int ret;
+	u32 data[ARRAY_SIZE(ctx->csa.spu_mailbox_data)];
+	int ret, count;
 
 	if (!access_ok(buf, len))
 		return -EFAULT;
@@ -2071,11 +2089,13 @@ static ssize_t spufs_wbox_info_read(struct file *file, char __user *buf,
 	if (ret)
 		return ret;
 	spin_lock(&ctx->csa.register_lock);
-	ret = __spufs_wbox_info_read(ctx, buf, len, pos);
+	count = spufs_wbox_info_cnt(ctx);
+	memcpy(&data, &ctx->csa.spu_mailbox_data, sizeof(data));
 	spin_unlock(&ctx->csa.register_lock);
 	spu_release_saved(ctx);
 
-	return ret;
+	return simple_read_from_buffer(buf, len, pos, &data,
+				count * sizeof(u32));
 }
 
 static const struct file_operations spufs_wbox_info_fops = {
@@ -2084,27 +2104,33 @@ static const struct file_operations spufs_wbox_info_fops = {
 	.llseek  = generic_file_llseek,
 };
 
-static ssize_t __spufs_dma_info_read(struct spu_context *ctx,
-			char __user *buf, size_t len, loff_t *pos)
+static void spufs_get_dma_info(struct spu_context *ctx,
+		struct spu_dma_info *info)
 {
-	struct spu_dma_info info;
-	struct mfc_cq_sr *qp, *spuqp;
 	int i;
 
-	info.dma_info_type = ctx->csa.priv2.spu_tag_status_query_RW;
-	info.dma_info_mask = ctx->csa.lscsa->tag_mask.slot[0];
-	info.dma_info_status = ctx->csa.spu_chnldata_RW[24];
-	info.dma_info_stall_and_notify = ctx->csa.spu_chnldata_RW[25];
-	info.dma_info_atomic_command_status = ctx->csa.spu_chnldata_RW[27];
+	info->dma_info_type = ctx->csa.priv2.spu_tag_status_query_RW;
+	info->dma_info_mask = ctx->csa.lscsa->tag_mask.slot[0];
+	info->dma_info_status = ctx->csa.spu_chnldata_RW[24];
+	info->dma_info_stall_and_notify = ctx->csa.spu_chnldata_RW[25];
+	info->dma_info_atomic_command_status = ctx->csa.spu_chnldata_RW[27];
 	for (i = 0; i < 16; i++) {
-		qp = &info.dma_info_command_data[i];
-		spuqp = &ctx->csa.priv2.spuq[i];
+		struct mfc_cq_sr *qp = &info->dma_info_command_data[i];
+		struct mfc_cq_sr *spuqp = &ctx->csa.priv2.spuq[i];
 
 		qp->mfc_cq_data0_RW = spuqp->mfc_cq_data0_RW;
 		qp->mfc_cq_data1_RW = spuqp->mfc_cq_data1_RW;
 		qp->mfc_cq_data2_RW = spuqp->mfc_cq_data2_RW;
 		qp->mfc_cq_data3_RW = spuqp->mfc_cq_data3_RW;
 	}
+}
+
+static ssize_t __spufs_dma_info_read(struct spu_context *ctx,
+			char __user *buf, size_t len, loff_t *pos)
+{
+	struct spu_dma_info info;
+
+	spufs_get_dma_info(ctx, &info);
 
 	return simple_read_from_buffer(buf, len, pos, &info,
 				sizeof info);
@@ -2114,6 +2140,7 @@ static ssize_t spufs_dma_info_read(struct file *file, char __user *buf,
 			      size_t len, loff_t *pos)
 {
 	struct spu_context *ctx = file->private_data;
+	struct spu_dma_info info;
 	int ret;
 
 	if (!access_ok(buf, len))
@@ -2123,11 +2150,12 @@ static ssize_t spufs_dma_info_read(struct file *file, char __user *buf,
 	if (ret)
 		return ret;
 	spin_lock(&ctx->csa.register_lock);
-	ret = __spufs_dma_info_read(ctx, buf, len, pos);
+	spufs_get_dma_info(ctx, &info);
 	spin_unlock(&ctx->csa.register_lock);
 	spu_release_saved(ctx);
 
-	return ret;
+	return simple_read_from_buffer(buf, len, pos, &info,
+				sizeof(info));
 }
 
 static const struct file_operations spufs_dma_info_fops = {
@@ -2136,13 +2164,31 @@ static const struct file_operations spufs_dma_info_fops = {
 	.llseek = no_llseek,
 };
 
+static void spufs_get_proxydma_info(struct spu_context *ctx,
+		struct spu_proxydma_info *info)
+{
+	int i;
+
+	info->proxydma_info_type = ctx->csa.prob.dma_querytype_RW;
+	info->proxydma_info_mask = ctx->csa.prob.dma_querymask_RW;
+	info->proxydma_info_status = ctx->csa.prob.dma_tagstatus_R;
+
+	for (i = 0; i < 8; i++) {
+		struct mfc_cq_sr *qp = &info->proxydma_info_command_data[i];
+		struct mfc_cq_sr *puqp = &ctx->csa.priv2.puq[i];
+
+		qp->mfc_cq_data0_RW = puqp->mfc_cq_data0_RW;
+		qp->mfc_cq_data1_RW = puqp->mfc_cq_data1_RW;
+		qp->mfc_cq_data2_RW = puqp->mfc_cq_data2_RW;
+		qp->mfc_cq_data3_RW = puqp->mfc_cq_data3_RW;
+	}
+}
+
 static ssize_t __spufs_proxydma_info_read(struct spu_context *ctx,
 			char __user *buf, size_t len, loff_t *pos)
 {
 	struct spu_proxydma_info info;
-	struct mfc_cq_sr *qp, *puqp;
 	int ret = sizeof info;
-	int i;
 
 	if (len < ret)
 		return -EINVAL;
@@ -2150,18 +2196,7 @@ static ssize_t __spufs_proxydma_info_read(struct spu_context *ctx,
 	if (!access_ok(buf, len))
 		return -EFAULT;
 
-	info.proxydma_info_type = ctx->csa.prob.dma_querytype_RW;
-	info.proxydma_info_mask = ctx->csa.prob.dma_querymask_RW;
-	info.proxydma_info_status = ctx->csa.prob.dma_tagstatus_R;
-	for (i = 0; i < 8; i++) {
-		qp = &info.proxydma_info_command_data[i];
-		puqp = &ctx->csa.priv2.puq[i];
-
-		qp->mfc_cq_data0_RW = puqp->mfc_cq_data0_RW;
-		qp->mfc_cq_data1_RW = puqp->mfc_cq_data1_RW;
-		qp->mfc_cq_data2_RW = puqp->mfc_cq_data2_RW;
-		qp->mfc_cq_data3_RW = puqp->mfc_cq_data3_RW;
-	}
+	spufs_get_proxydma_info(ctx, &info);
 
 	return simple_read_from_buffer(buf, len, pos, &info,
 				sizeof info);
@@ -2171,17 +2206,19 @@ static ssize_t spufs_proxydma_info_read(struct file *file, char __user *buf,
 				   size_t len, loff_t *pos)
 {
 	struct spu_context *ctx = file->private_data;
+	struct spu_proxydma_info info;
 	int ret;
 
 	ret = spu_acquire_saved(ctx);
 	if (ret)
 		return ret;
 	spin_lock(&ctx->csa.register_lock);
-	ret = __spufs_proxydma_info_read(ctx, buf, len, pos);
+	spufs_get_proxydma_info(ctx, &info);
 	spin_unlock(&ctx->csa.register_lock);
 	spu_release_saved(ctx);
 
-	return ret;
+	return simple_read_from_buffer(buf, len, pos, &info,
+				sizeof(info));
 }
 
 static const struct file_operations spufs_proxydma_info_fops = {
-- 
2.25.1

[PATCH 5.4 091/261] libertas_tf: avoid a null dereference in pointer priv

[Greg Kroah-Hartman]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 049ceac308b0d57c4f06b9fb957cdf95d315cf0b ]

Currently there is a check if priv is null when calling lbtf_remove_card
but not in a previous call to if_usb_reset_dev that can also dereference
priv.  Fix this by also only calling lbtf_remove_card if priv is null.

It is noteable that there don't seem to be any bugs reported that the
null pointer dereference has ever occurred, so I'm not sure if the null
check is required, but since we're doing a null check anyway it should
be done for both function calls.

Addresses-Coverity: ("Dereference before null check")
Fixes: baa0280f08c7 ("libertas_tf: don't defer firmware loading until start()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200501173900.296658-1-colin.king@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/libertas_tf/if_usb.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/marvell/libertas_tf/if_usb.c b/drivers/net/wireless/marvell/libertas_tf/if_usb.c
index 25ac9db35dbf..bedc09215088 100644
--- a/drivers/net/wireless/marvell/libertas_tf/if_usb.c
+++ b/drivers/net/wireless/marvell/libertas_tf/if_usb.c
@@ -247,10 +247,10 @@ static void if_usb_disconnect(struct usb_interface *intf)
 
 	lbtf_deb_enter(LBTF_DEB_MAIN);
 
-	if_usb_reset_device(priv);
-
-	if (priv)
+	if (priv) {
+		if_usb_reset_device(priv);
 		lbtf_remove_card(priv);
+	}
 
 	/* Unlink and free urb */
 	if_usb_free(cardp);
-- 
2.25.1

[PATCH 5.4 092/261] xfs: clean up the error handling in xfs_swap_extents

[Greg Kroah-Hartman]

From: Darrick J. Wong <darrick.wong@oracle.com>

[ Upstream commit 8bc3b5e4b70d28f8edcafc3c9e4de515998eea9e ]

Make sure we release resources properly if we cannot clean out the COW
extents in preparation for an extent swap.

Fixes: 96987eea537d6c ("xfs: cancel COW blocks before swapext")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/xfs_bmap_util.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c
index 4f443703065e..0c71acc1b831 100644
--- a/fs/xfs/xfs_bmap_util.c
+++ b/fs/xfs/xfs_bmap_util.c
@@ -1760,7 +1760,7 @@ xfs_swap_extents(
 	if (xfs_inode_has_cow_data(tip)) {
 		error = xfs_reflink_cancel_cow_range(tip, 0, NULLFILEOFF, true);
 		if (error)
-			return error;
+			goto out_unlock;
 	}
 
 	/*
-- 
2.25.1

[PATCH 5.4 093/261] Crypto/chcr: fix for ccm(aes) failed test

[Greg Kroah-Hartman]

From: Devulapally Shiva Krishna <shiva@chelsio.com>

[ Upstream commit 10b0c75d7bc19606fa9a62c8ab9180e95c0e0385 ]

The ccm(aes) test fails when req->assoclen > ~240bytes.

The problem is the value assigned to auth_offset is wrong.
As auth_offset is unsigned char, it can take max value as 255.
So fix it by making it unsigned int.

Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Devulapally Shiva Krishna <shiva@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/chelsio/chcr_algo.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/crypto/chelsio/chcr_algo.c b/drivers/crypto/chelsio/chcr_algo.c
index 01dd418bdadc..fe2eadc0ce83 100644
--- a/drivers/crypto/chelsio/chcr_algo.c
+++ b/drivers/crypto/chelsio/chcr_algo.c
@@ -2818,7 +2818,7 @@ static void fill_sec_cpl_for_aead(struct cpl_tx_sec_pdu *sec_cpl,
 	unsigned int mac_mode = CHCR_SCMD_AUTH_MODE_CBCMAC;
 	unsigned int c_id = a_ctx(tfm)->tx_chan_id;
 	unsigned int ccm_xtra;
-	unsigned char tag_offset = 0, auth_offset = 0;
+	unsigned int tag_offset = 0, auth_offset = 0;
 	unsigned int assoclen;
 
 	if (get_aead_subtype(tfm) == CRYPTO_ALG_SUB_TYPE_AEAD_RFC4309)
-- 
2.25.1

[PATCH 5.4 094/261] MIPS: Truncate link address into 32bit for 32bit kernel

[Greg Kroah-Hartman]

From: Jiaxun Yang <jiaxun.yang@flygoat.com>

[ Upstream commit ff487d41036035376e47972c7c522490b839ab37 ]

LLD failed to link vmlinux with 64bit load address for 32bit ELF
while bfd will strip 64bit address into 32bit silently.
To fix LLD build, we should truncate load address provided by platform
into 32bit for 32bit kernel.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/786
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=25784
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/Makefile                 | 13 ++++++++++++-
 arch/mips/boot/compressed/Makefile |  2 +-
 arch/mips/kernel/vmlinux.lds.S     |  2 +-
 3 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index cdc09b71febe..5403a91ce098 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -285,12 +285,23 @@ ifdef CONFIG_64BIT
   endif
 endif
 
+# When linking a 32-bit executable the LLVM linker cannot cope with a
+# 32-bit load address that has been sign-extended to 64 bits.  Simply
+# remove the upper 32 bits then, as it is safe to do so with other
+# linkers.
+ifdef CONFIG_64BIT
+	load-ld			= $(load-y)
+else
+	load-ld			= $(subst 0xffffffff,0x,$(load-y))
+endif
+
 KBUILD_AFLAGS	+= $(cflags-y)
 KBUILD_CFLAGS	+= $(cflags-y)
-KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y)
+KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y) -DLINKER_LOAD_ADDRESS=$(load-ld)
 KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)
 
 bootvars-y	= VMLINUX_LOAD_ADDRESS=$(load-y) \
+		  LINKER_LOAD_ADDRESS=$(load-ld) \
 		  VMLINUX_ENTRY_ADDRESS=$(entry-y) \
 		  PLATFORM="$(platform-y)" \
 		  ITS_INPUTS="$(its-y)"
diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index d859f079b771..378cbfb31ee7 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -90,7 +90,7 @@ ifneq ($(zload-y),)
 VMLINUZ_LOAD_ADDRESS := $(zload-y)
 else
 VMLINUZ_LOAD_ADDRESS = $(shell $(obj)/calc_vmlinuz_load_addr \
-		$(obj)/vmlinux.bin $(VMLINUX_LOAD_ADDRESS))
+		$(obj)/vmlinux.bin $(LINKER_LOAD_ADDRESS))
 endif
 UIMAGE_LOADADDR = $(VMLINUZ_LOAD_ADDRESS)
 
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 33ee0d18fb0a..eb9d7af93836 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -50,7 +50,7 @@ SECTIONS
 	/* . = 0xa800000000300000; */
 	. = 0xffffffff80300000;
 #endif
-	. = VMLINUX_LOAD_ADDRESS;
+	. = LINKER_LOAD_ADDRESS;
 	/* read-only */
 	_text = .;	/* Text and read-only data */
 	.text : {
-- 
2.25.1

[PATCH 5.4 095/261] mips: cm: Fix an invalid error code of INTVN_*_ERR

[Greg Kroah-Hartman]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

[ Upstream commit 8a0efb8b101665a843205eab3d67ab09cb2d9a8d ]

Commit 3885c2b463f6 ("MIPS: CM: Add support for reporting CM cache
errors") adds cm2_causes[] array with map of error type ID and
pointers to the short description string. There is a mistake in
the table, since according to MIPS32 manual CM2_ERROR_TYPE = {17,18}
correspond to INTVN_WR_ERR and INTVN_RD_ERR, while the table
claims they have {0x17,0x18} codes. This is obviously hex-dec
copy-paste bug. Moreover codes {0x18 - 0x1a} indicate L2 ECC errors.

Fixes: 3885c2b463f6 ("MIPS: CM: Add support for reporting CM cache errors")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-pm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/kernel/mips-cm.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c
index e5ea3db23d6b..a9eab83d9148 100644
--- a/arch/mips/kernel/mips-cm.c
+++ b/arch/mips/kernel/mips-cm.c
@@ -119,9 +119,9 @@ static char *cm2_causes[32] = {
 	"COH_RD_ERR", "MMIO_WR_ERR", "MMIO_RD_ERR", "0x07",
 	"0x08", "0x09", "0x0a", "0x0b",
 	"0x0c", "0x0d", "0x0e", "0x0f",
-	"0x10", "0x11", "0x12", "0x13",
-	"0x14", "0x15", "0x16", "INTVN_WR_ERR",
-	"INTVN_RD_ERR", "0x19", "0x1a", "0x1b",
+	"0x10", "INTVN_WR_ERR", "INTVN_RD_ERR", "0x13",
+	"0x14", "0x15", "0x16", "0x17",
+	"0x18", "0x19", "0x1a", "0x1b",
 	"0x1c", "0x1d", "0x1e", "0x1f"
 };
 
-- 
2.25.1

[PATCH 5.4 096/261] kgdb: Fix spurious true from in_dbg_master()

[Greg Kroah-Hartman]

From: Daniel Thompson <daniel.thompson@linaro.org>

[ Upstream commit 3fec4aecb311995189217e64d725cfe84a568de3 ]

Currently there is a small window where a badly timed migration could
cause in_dbg_master() to spuriously return true. Specifically if we
migrate to a new core after reading the processor id and the previous
core takes a breakpoint then we will evaluate true if we read
kgdb_active before we get the IPI to bring us to halt.

Fix this by checking irqs_disabled() first. Interrupts are always
disabled when we are executing the kgdb trap so this is an acceptable
prerequisite. This also allows us to replace raw_smp_processor_id()
with smp_processor_id() since the short circuit logic will prevent
warnings from PREEMPT_DEBUG.

Fixes: dcc7871128e9 ("kgdb: core changes to support kdb")
Suggested-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200506164223.2875760-1-daniel.thompson@linaro.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/kgdb.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h
index b072aeb1fd78..4d6fe87fd38f 100644
--- a/include/linux/kgdb.h
+++ b/include/linux/kgdb.h
@@ -323,7 +323,7 @@ extern void gdbstub_exit(int status);
 extern int			kgdb_single_step;
 extern atomic_t			kgdb_active;
 #define in_dbg_master() \
-	(raw_smp_processor_id() == atomic_read(&kgdb_active))
+	(irqs_disabled() && (smp_processor_id() == atomic_read(&kgdb_active)))
 extern bool dbg_is_early;
 extern void __init dbg_late_init(void);
 extern void kgdb_panic(const char *msg);
-- 
2.25.1

[PATCH 5.4 097/261] xfs: reset buffer write failure state on successful completion

[Greg Kroah-Hartman]

From: Brian Foster <bfoster@redhat.com>

[ Upstream commit b6983e80b03bd4fd42de71993b3ac7403edac758 ]

The buffer write failure flag is intended to control the internal
write retry that XFS has historically implemented to help mitigate
the severity of transient I/O errors. The flag is set when a buffer
is resubmitted from the I/O completion path due to a previous
failure. It is checked on subsequent I/O completions to skip the
internal retry and fall through to the higher level configurable
error handling mechanism. The flag is cleared in the synchronous and
delwri submission paths and also checked in various places to log
write failure messages.

There are a couple minor problems with the current usage of this
flag. One is that we issue an internal retry after every submission
from xfsaild due to how delwri submission clears the flag. This
results in double the expected or configured number of write
attempts when under sustained failures. Another more subtle issue is
that the flag is never cleared on successful I/O completion. This
can cause xfs_wait_buftarg() to suggest that dirty buffers are being
thrown away due to the existence of the flag, when the reality is
that the flag might still be set because the write succeeded on the
retry.

Clear the write failure flag on successful I/O completion to address
both of these problems. This means that the internal retry attempt
occurs once since the last time a buffer write failed and that
various other contexts only see the flag set when the immediately
previous write attempt has failed.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/xfs_buf.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c
index 0abba171aa89..1264ac63e4e5 100644
--- a/fs/xfs/xfs_buf.c
+++ b/fs/xfs/xfs_buf.c
@@ -1162,8 +1162,10 @@ xfs_buf_ioend(
 		bp->b_ops->verify_read(bp);
 	}
 
-	if (!bp->b_error)
+	if (!bp->b_error) {
+		bp->b_flags &= ~XBF_WRITE_FAIL;
 		bp->b_flags |= XBF_DONE;
+	}
 
 	if (bp->b_iodone)
 		(*(bp->b_iodone))(bp);
@@ -1223,7 +1225,7 @@ xfs_bwrite(
 
 	bp->b_flags |= XBF_WRITE;
 	bp->b_flags &= ~(XBF_ASYNC | XBF_READ | _XBF_DELWRI_Q |
-			 XBF_WRITE_FAIL | XBF_DONE);
+			 XBF_DONE);
 
 	error = xfs_buf_submit(bp);
 	if (error)
@@ -1929,7 +1931,7 @@ xfs_buf_delwri_submit_buffers(
 		 * synchronously. Otherwise, drop the buffer from the delwri
 		 * queue and submit async.
 		 */
-		bp->b_flags &= ~(_XBF_DELWRI_Q | XBF_WRITE_FAIL);
+		bp->b_flags &= ~_XBF_DELWRI_Q;
 		bp->b_flags |= XBF_WRITE;
 		if (wait_list) {
 			bp->b_flags &= ~XBF_ASYNC;
-- 
2.25.1

[PATCH 5.4 098/261] xfs: fix duplicate verification from xfs_qm_dqflush()

[Greg Kroah-Hartman]

From: Brian Foster <bfoster@redhat.com>

[ Upstream commit 629dcb38dc351947ed6a26a997d4b587f3bd5c7e ]

The pre-flush dquot verification in xfs_qm_dqflush() duplicates the
read verifier by checking the dquot in the on-disk buffer. Instead,
verify the in-core variant before it is flushed to the buffer.

Fixes: 7224fa482a6d ("xfs: add full xfs_dqblk verifier")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/xfs_dquot.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/fs/xfs/xfs_dquot.c b/fs/xfs/xfs_dquot.c
index aeb95e7391c1..3cbf248af51f 100644
--- a/fs/xfs/xfs_dquot.c
+++ b/fs/xfs/xfs_dquot.c
@@ -1116,13 +1116,12 @@ xfs_qm_dqflush(
 	dqb = bp->b_addr + dqp->q_bufoffset;
 	ddqp = &dqb->dd_diskdq;
 
-	/*
-	 * A simple sanity check in case we got a corrupted dquot.
-	 */
-	fa = xfs_dqblk_verify(mp, dqb, be32_to_cpu(ddqp->d_id), 0);
+	/* sanity check the in-core structure before we flush */
+	fa = xfs_dquot_verify(mp, &dqp->q_core, be32_to_cpu(dqp->q_core.d_id),
+			      0);
 	if (fa) {
 		xfs_alert(mp, "corrupt dquot ID 0x%x in memory at %pS",
-				be32_to_cpu(ddqp->d_id), fa);
+				be32_to_cpu(dqp->q_core.d_id), fa);
 		xfs_buf_relse(bp);
 		xfs_dqfunlock(dqp);
 		xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
-- 
2.25.1

[PATCH 5.4 099/261] platform/x86: intel-vbtn: Use acpi_evaluate_integer()

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 18937875a231d831c309716d6d8fc358f8381881 ]

Use acpi_evaluate_integer() instead of open-coding it.

This is a preparation patch for adding a intel_vbtn_has_switches()
helper function.

Fixes: de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel-vbtn.c | 19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)

diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c
index b74932307d69..3b3789bb8ec5 100644
--- a/drivers/platform/x86/intel-vbtn.c
+++ b/drivers/platform/x86/intel-vbtn.c
@@ -118,28 +118,21 @@ static void detect_tablet_mode(struct platform_device *device)
 	const char *chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE);
 	struct intel_vbtn_priv *priv = dev_get_drvdata(&device->dev);
 	acpi_handle handle = ACPI_HANDLE(&device->dev);
-	struct acpi_buffer vgbs_output = { ACPI_ALLOCATE_BUFFER, NULL };
-	union acpi_object *obj;
+	unsigned long long vgbs;
 	acpi_status status;
 	int m;
 
 	if (!(chassis_type && strcmp(chassis_type, "31") == 0))
-		goto out;
+		return;
 
-	status = acpi_evaluate_object(handle, "VGBS", NULL, &vgbs_output);
+	status = acpi_evaluate_integer(handle, "VGBS", NULL, &vgbs);
 	if (ACPI_FAILURE(status))
-		goto out;
-
-	obj = vgbs_output.pointer;
-	if (!(obj && obj->type == ACPI_TYPE_INTEGER))
-		goto out;
+		return;
 
-	m = !(obj->integer.value & TABLET_MODE_FLAG);
+	m = !(vgbs & TABLET_MODE_FLAG);
 	input_report_switch(priv->input_dev, SW_TABLET_MODE, m);
-	m = (obj->integer.value & DOCK_MODE_FLAG) ? 1 : 0;
+	m = (vgbs & DOCK_MODE_FLAG) ? 1 : 0;
 	input_report_switch(priv->input_dev, SW_DOCK, m);
-out:
-	kfree(vgbs_output.pointer);
 }
 
 static int intel_vbtn_probe(struct platform_device *device)
-- 
2.25.1

[PATCH 5.4 100/261] platform/x86: intel-vbtn: Split keymap into buttons and switches parts

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit f6ba524970c4b73b234bf41ecd6628f5803b1559 ]

Split the sparse keymap into 2 separate keymaps, a buttons and a switches
keymap and combine the 2 to a single map again in intel_vbtn_input_setup().

This is a preparation patch for not telling userspace that we have switches
when we do not have them (and for doing the same for the buttons).

Fixes: de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel-vbtn.c | 28 +++++++++++++++++++++++++---
 1 file changed, 25 insertions(+), 3 deletions(-)

diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c
index 3b3789bb8ec5..2ab3dbd26b5e 100644
--- a/drivers/platform/x86/intel-vbtn.c
+++ b/drivers/platform/x86/intel-vbtn.c
@@ -39,14 +39,20 @@ static const struct key_entry intel_vbtn_keymap[] = {
 	{ KE_IGNORE, 0xC7, { KEY_VOLUMEDOWN } },	/* volume-down key release */
 	{ KE_KEY,    0xC8, { KEY_ROTATE_LOCK_TOGGLE } },	/* rotate-lock key press */
 	{ KE_KEY,    0xC9, { KEY_ROTATE_LOCK_TOGGLE } },	/* rotate-lock key release */
+};
+
+static const struct key_entry intel_vbtn_switchmap[] = {
 	{ KE_SW,     0xCA, { .sw = { SW_DOCK, 1 } } },		/* Docked */
 	{ KE_SW,     0xCB, { .sw = { SW_DOCK, 0 } } },		/* Undocked */
 	{ KE_SW,     0xCC, { .sw = { SW_TABLET_MODE, 1 } } },	/* Tablet */
 	{ KE_SW,     0xCD, { .sw = { SW_TABLET_MODE, 0 } } },	/* Laptop */
-	{ KE_END },
 };
 
+#define KEYMAP_LEN \
+	(ARRAY_SIZE(intel_vbtn_keymap) + ARRAY_SIZE(intel_vbtn_switchmap) + 1)
+
 struct intel_vbtn_priv {
+	struct key_entry keymap[KEYMAP_LEN];
 	struct input_dev *input_dev;
 	bool wakeup_mode;
 };
@@ -54,13 +60,29 @@ struct intel_vbtn_priv {
 static int intel_vbtn_input_setup(struct platform_device *device)
 {
 	struct intel_vbtn_priv *priv = dev_get_drvdata(&device->dev);
-	int ret;
+	int ret, keymap_len = 0;
+
+	if (true) {
+		memcpy(&priv->keymap[keymap_len], intel_vbtn_keymap,
+		       ARRAY_SIZE(intel_vbtn_keymap) *
+		       sizeof(struct key_entry));
+		keymap_len += ARRAY_SIZE(intel_vbtn_keymap);
+	}
+
+	if (true) {
+		memcpy(&priv->keymap[keymap_len], intel_vbtn_switchmap,
+		       ARRAY_SIZE(intel_vbtn_switchmap) *
+		       sizeof(struct key_entry));
+		keymap_len += ARRAY_SIZE(intel_vbtn_switchmap);
+	}
+
+	priv->keymap[keymap_len].type = KE_END;
 
 	priv->input_dev = devm_input_allocate_device(&device->dev);
 	if (!priv->input_dev)
 		return -ENOMEM;
 
-	ret = sparse_keymap_setup(priv->input_dev, intel_vbtn_keymap, NULL);
+	ret = sparse_keymap_setup(priv->input_dev, priv->keymap, NULL);
 	if (ret)
 		return ret;
 
-- 
2.25.1

[PATCH 5.4 101/261] platform/x86: intel-vbtn: Do not advertise switches to userspace if they are not there

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 990fbb48067bf8cfa34b7d1e6e1674eaaef2f450 ]

Commit de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode
switch on 2-in-1's") added a DMI chassis-type check to avoid accidentally
reporting SW_TABLET_MODE = 1 to userspace on laptops (specifically on the
Dell XPS 9360), to avoid e.g. userspace ignoring touchpad events because
userspace thought the device was in tablet-mode.

But if we are not getting the initial status of the switch because the
device does not have a tablet mode, then we really should not advertise
the presence of a tablet-mode switch to userspace at all, as userspace may
use the mere presence of this switch for certain heuristics.

Fixes: de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel-vbtn.c | 25 +++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c
index 2ab3dbd26b5e..ab33349035b1 100644
--- a/drivers/platform/x86/intel-vbtn.c
+++ b/drivers/platform/x86/intel-vbtn.c
@@ -54,6 +54,7 @@ static const struct key_entry intel_vbtn_switchmap[] = {
 struct intel_vbtn_priv {
 	struct key_entry keymap[KEYMAP_LEN];
 	struct input_dev *input_dev;
+	bool has_switches;
 	bool wakeup_mode;
 };
 
@@ -69,7 +70,7 @@ static int intel_vbtn_input_setup(struct platform_device *device)
 		keymap_len += ARRAY_SIZE(intel_vbtn_keymap);
 	}
 
-	if (true) {
+	if (priv->has_switches) {
 		memcpy(&priv->keymap[keymap_len], intel_vbtn_switchmap,
 		       ARRAY_SIZE(intel_vbtn_switchmap) *
 		       sizeof(struct key_entry));
@@ -137,16 +138,12 @@ out_unknown:
 
 static void detect_tablet_mode(struct platform_device *device)
 {
-	const char *chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE);
 	struct intel_vbtn_priv *priv = dev_get_drvdata(&device->dev);
 	acpi_handle handle = ACPI_HANDLE(&device->dev);
 	unsigned long long vgbs;
 	acpi_status status;
 	int m;
 
-	if (!(chassis_type && strcmp(chassis_type, "31") == 0))
-		return;
-
 	status = acpi_evaluate_integer(handle, "VGBS", NULL, &vgbs);
 	if (ACPI_FAILURE(status))
 		return;
@@ -157,6 +154,19 @@ static void detect_tablet_mode(struct platform_device *device)
 	input_report_switch(priv->input_dev, SW_DOCK, m);
 }
 
+static bool intel_vbtn_has_switches(acpi_handle handle)
+{
+	const char *chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE);
+	unsigned long long vgbs;
+	acpi_status status;
+
+	if (!(chassis_type && strcmp(chassis_type, "31") == 0))
+		return false;
+
+	status = acpi_evaluate_integer(handle, "VGBS", NULL, &vgbs);
+	return ACPI_SUCCESS(status);
+}
+
 static int intel_vbtn_probe(struct platform_device *device)
 {
 	acpi_handle handle = ACPI_HANDLE(&device->dev);
@@ -175,13 +185,16 @@ static int intel_vbtn_probe(struct platform_device *device)
 		return -ENOMEM;
 	dev_set_drvdata(&device->dev, priv);
 
+	priv->has_switches = intel_vbtn_has_switches(handle);
+
 	err = intel_vbtn_input_setup(device);
 	if (err) {
 		pr_err("Failed to setup Intel Virtual Button\n");
 		return err;
 	}
 
-	detect_tablet_mode(device);
+	if (priv->has_switches)
+		detect_tablet_mode(device);
 
 	status = acpi_install_notify_handler(handle,
 					     ACPI_DEVICE_NOTIFY,
-- 
2.25.1

[PATCH 5.4 102/261] platform/x86: intel-vbtn: Also handle tablet-mode switch on "Detachable" and "Portable" chassis-types

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 1fac39fd0316b19c3e57a182524332332d1643ce ]

Commit de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode
switch on 2-in-1's") added a DMI chassis-type check to avoid accidentally
reporting SW_TABLET_MODE = 1 to userspace on laptops.

Some devices with a detachable keyboard and using the intel-vbnt (INT33D6)
interface to report if they are in tablet mode (keyboard detached) or not,
report 32 / "Detachable" as chassis-type, e.g. the HP Pavilion X2 series.

Other devices with a detachable keyboard and using the intel-vbnt (INT33D6)
interface to report SW_TABLET_MODE, report 8 / "Portable" as chassis-type.
The Dell Venue 11 Pro 7130 is an example of this.

Extend the DMI chassis-type check to also accept Portables and Detachables
so that the intel-vbtn driver will report SW_TABLET_MODE on these devices.

Note the chassis-type check was originally added to avoid a false-positive
tablet-mode report on the Dell XPS 9360 laptop. To the best of my knowledge
that laptop is using a chassis-type of 9 / "Laptop", so after this commit
we still ignore the tablet-switch for that chassis-type.

Fixes: de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <Mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel-vbtn.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c
index ab33349035b1..5acfa08b5dac 100644
--- a/drivers/platform/x86/intel-vbtn.c
+++ b/drivers/platform/x86/intel-vbtn.c
@@ -157,12 +157,22 @@ static void detect_tablet_mode(struct platform_device *device)
 static bool intel_vbtn_has_switches(acpi_handle handle)
 {
 	const char *chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE);
+	unsigned long chassis_type_int;
 	unsigned long long vgbs;
 	acpi_status status;
 
-	if (!(chassis_type && strcmp(chassis_type, "31") == 0))
+	if (kstrtoul(chassis_type, 10, &chassis_type_int))
 		return false;
 
+	switch (chassis_type_int) {
+	case  8: /* Portable */
+	case 31: /* Convertible */
+	case 32: /* Detachable */
+		break;
+	default:
+		return false;
+	}
+
 	status = acpi_evaluate_integer(handle, "VGBS", NULL, &vgbs);
 	return ACPI_SUCCESS(status);
 }
-- 
2.25.1

[PATCH 5.4 103/261] iwlwifi: avoid debug max amsdu config overwriting itself

[Greg Kroah-Hartman]

From: Mordechay Goodstein <mordechay.goodstein@intel.com>

[ Upstream commit a65a5824298b06049dbaceb8a9bd19709dc9507c ]

If we set amsdu_len one after another the second one overwrites
the orig_amsdu_len so allow only moving from debug to non debug state.

Also the TLC update check was wrong: it was checking that also the orig
is smaller then the new updated size, which is not the case in debug
amsdu mode.

Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Fixes: af2984e9e625 ("iwlwifi: mvm: add a debugfs entry to set a fixed size AMSDU for all TX packets")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200424182644.e565446a4fce.I9729d8c520d8b8bb4de9a5cdc62e01eb85168aac@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c | 11 +++++++----
 drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c   | 15 ++++++++-------
 2 files changed, 15 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c
index ad18c2f1a806..524f9dd2323d 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c
@@ -5,10 +5,9 @@
  *
  * GPL LICENSE SUMMARY
  *
- * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
  * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
  * Copyright(c) 2016 - 2017 Intel Deutschland GmbH
- * Copyright(c) 2018 - 2019 Intel Corporation
+ * Copyright(c) 2012 - 2014, 2018 - 2020 Intel Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -28,10 +27,9 @@
  *
  * BSD LICENSE
  *
- * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
  * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
  * Copyright(c) 2016 - 2017 Intel Deutschland GmbH
- * Copyright(c) 2018 - 2019 Intel Corporation
+ * Copyright(c) 2012 - 2014, 2018 - 2020 Intel Corporation
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -478,6 +476,11 @@ static ssize_t iwl_dbgfs_amsdu_len_write(struct ieee80211_sta *sta,
 	if (kstrtou16(buf, 0, &amsdu_len))
 		return -EINVAL;
 
+	/* only change from debug set <-> debug unset */
+	if ((amsdu_len && mvmsta->orig_amsdu_len) ||
+	    (!!amsdu_len && mvmsta->orig_amsdu_len))
+		return -EBUSY;
+
 	if (amsdu_len) {
 		mvmsta->orig_amsdu_len = sta->max_amsdu_len;
 		sta->max_amsdu_len = amsdu_len;
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c
index 5b2bd603febf..be8bc0601d7b 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c
@@ -367,14 +367,15 @@ void iwl_mvm_tlc_update_notif(struct iwl_mvm *mvm,
 		u16 size = le32_to_cpu(notif->amsdu_size);
 		int i;
 
-		/*
-		 * In debug sta->max_amsdu_len < size
-		 * so also check with orig_amsdu_len which holds the original
-		 * data before debugfs changed the value
-		 */
-		if (WARN_ON(sta->max_amsdu_len < size &&
-			    mvmsta->orig_amsdu_len < size))
+		if (sta->max_amsdu_len < size) {
+			/*
+			 * In debug sta->max_amsdu_len < size
+			 * so also check with orig_amsdu_len which holds the
+			 * original data before debugfs changed the value
+			 */
+			WARN_ON(mvmsta->orig_amsdu_len < size);
 			goto out;
+		}
 
 		mvmsta->amsdu_enabled = le32_to_cpu(notif->amsdu_enabled);
 		mvmsta->max_amsdu_len = size;
-- 
2.25.1

[PATCH 5.4 104/261] nvme: refine the Qemu Identify CNS quirk

[Greg Kroah-Hartman]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit b9a5c3d4c34d8bd9fd75f7f28d18a57cb68da237 ]

Add a helper to check if we can use Identify CNS values > 1, and refine
the Qemu quirk to not apply to reported versions larger than 1.1, as the
Qemu implementation had been fixed by then.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index f0e0af3aa714..d4b388793f40 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -1032,6 +1032,19 @@ void nvme_stop_keep_alive(struct nvme_ctrl *ctrl)
 }
 EXPORT_SYMBOL_GPL(nvme_stop_keep_alive);
 
+/*
+ * In NVMe 1.0 the CNS field was just a binary controller or namespace
+ * flag, thus sending any new CNS opcodes has a big chance of not working.
+ * Qemu unfortunately had that bug after reporting a 1.1 version compliance
+ * (but not for any later version).
+ */
+static bool nvme_ctrl_limited_cns(struct nvme_ctrl *ctrl)
+{
+	if (ctrl->quirks & NVME_QUIRK_IDENTIFY_CNS)
+		return ctrl->vs < NVME_VS(1, 2, 0);
+	return ctrl->vs < NVME_VS(1, 1, 0);
+}
+
 static int nvme_identify_ctrl(struct nvme_ctrl *dev, struct nvme_id_ctrl **id)
 {
 	struct nvme_command c = { };
@@ -3740,8 +3753,7 @@ static void nvme_scan_work(struct work_struct *work)
 
 	mutex_lock(&ctrl->scan_lock);
 	nn = le32_to_cpu(id->nn);
-	if (ctrl->vs >= NVME_VS(1, 1, 0) &&
-	    !(ctrl->quirks & NVME_QUIRK_IDENTIFY_CNS)) {
+	if (!nvme_ctrl_limited_cns(ctrl)) {
 		if (!nvme_scan_ns_list(ctrl, nn))
 			goto out_free_id;
 	}
-- 
2.25.1

[PATCH 5.4 105/261] nvme-pci: align io queue count with allocted nvme_queue in nvme_probe

[Greg Kroah-Hartman]

From: Weiping Zhang <zhangweiping@didiglobal.com>

[ Upstream commit 2a5bcfdd41d68559567cec3c124a75e093506cc1 ]

Since commit 147b27e4bd08 ("nvme-pci: allocate device queues storage
space at probe"), nvme_alloc_queue does not alloc the nvme queues
itself anymore.

If the write/poll_queues module parameters are changed at runtime to
values larger than the number of allocated queues in nvme_probe,
nvme_alloc_queue will access unallocated memory.

Add a new nr_allocated_queues member to struct nvme_dev to record how
many queues were alloctated in nvme_probe to avoid using more than the
allocated queues after a reset following a change to the
write/poll_queues module parameters.

Also add nr_write_queues and nr_poll_queues members to allow refreshing
the number of write and poll queues based on a change to the module
parameters when resetting the controller.

Fixes: 147b27e4bd08 ("nvme-pci: allocate device queues storage space at probe")
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
[hch: add nvme_max_io_queues, update the commit message]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/pci.c | 57 ++++++++++++++++++++++++-----------------
 1 file changed, 33 insertions(+), 24 deletions(-)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index cd64ddb129e5..1c2129493508 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -128,6 +128,9 @@ struct nvme_dev {
 	dma_addr_t host_mem_descs_dma;
 	struct nvme_host_mem_buf_desc *host_mem_descs;
 	void **host_mem_desc_bufs;
+	unsigned int nr_allocated_queues;
+	unsigned int nr_write_queues;
+	unsigned int nr_poll_queues;
 };
 
 static int io_queue_depth_set(const char *val, const struct kernel_param *kp)
@@ -210,25 +213,14 @@ struct nvme_iod {
 	struct scatterlist *sg;
 };
 
-static unsigned int max_io_queues(void)
+static inline unsigned int nvme_dbbuf_size(struct nvme_dev *dev)
 {
-	return num_possible_cpus() + write_queues + poll_queues;
-}
-
-static unsigned int max_queue_count(void)
-{
-	/* IO queues + admin queue */
-	return 1 + max_io_queues();
-}
-
-static inline unsigned int nvme_dbbuf_size(u32 stride)
-{
-	return (max_queue_count() * 8 * stride);
+	return dev->nr_allocated_queues * 8 * dev->db_stride;
 }
 
 static int nvme_dbbuf_dma_alloc(struct nvme_dev *dev)
 {
-	unsigned int mem_size = nvme_dbbuf_size(dev->db_stride);
+	unsigned int mem_size = nvme_dbbuf_size(dev);
 
 	if (dev->dbbuf_dbs)
 		return 0;
@@ -253,7 +245,7 @@ static int nvme_dbbuf_dma_alloc(struct nvme_dev *dev)
 
 static void nvme_dbbuf_dma_free(struct nvme_dev *dev)
 {
-	unsigned int mem_size = nvme_dbbuf_size(dev->db_stride);
+	unsigned int mem_size = nvme_dbbuf_size(dev);
 
 	if (dev->dbbuf_dbs) {
 		dma_free_coherent(dev->dev, mem_size,
@@ -2030,7 +2022,7 @@ static int nvme_setup_host_mem(struct nvme_dev *dev)
 static void nvme_calc_irq_sets(struct irq_affinity *affd, unsigned int nrirqs)
 {
 	struct nvme_dev *dev = affd->priv;
-	unsigned int nr_read_queues;
+	unsigned int nr_read_queues, nr_write_queues = dev->nr_write_queues;
 
 	/*
 	 * If there is no interupt available for queues, ensure that
@@ -2046,12 +2038,12 @@ static void nvme_calc_irq_sets(struct irq_affinity *affd, unsigned int nrirqs)
 	if (!nrirqs) {
 		nrirqs = 1;
 		nr_read_queues = 0;
-	} else if (nrirqs == 1 || !write_queues) {
+	} else if (nrirqs == 1 || !nr_write_queues) {
 		nr_read_queues = 0;
-	} else if (write_queues >= nrirqs) {
+	} else if (nr_write_queues >= nrirqs) {
 		nr_read_queues = 1;
 	} else {
-		nr_read_queues = nrirqs - write_queues;
+		nr_read_queues = nrirqs - nr_write_queues;
 	}
 
 	dev->io_queues[HCTX_TYPE_DEFAULT] = nrirqs - nr_read_queues;
@@ -2075,7 +2067,7 @@ static int nvme_setup_irqs(struct nvme_dev *dev, unsigned int nr_io_queues)
 	 * Poll queues don't need interrupts, but we need at least one IO
 	 * queue left over for non-polled IO.
 	 */
-	this_p_queues = poll_queues;
+	this_p_queues = dev->nr_poll_queues;
 	if (this_p_queues >= nr_io_queues) {
 		this_p_queues = nr_io_queues - 1;
 		irq_queues = 1;
@@ -2105,14 +2097,25 @@ static void nvme_disable_io_queues(struct nvme_dev *dev)
 		__nvme_disable_io_queues(dev, nvme_admin_delete_cq);
 }
 
+static unsigned int nvme_max_io_queues(struct nvme_dev *dev)
+{
+	return num_possible_cpus() + dev->nr_write_queues + dev->nr_poll_queues;
+}
+
 static int nvme_setup_io_queues(struct nvme_dev *dev)
 {
 	struct nvme_queue *adminq = &dev->queues[0];
 	struct pci_dev *pdev = to_pci_dev(dev->dev);
-	int result, nr_io_queues;
+	unsigned int nr_io_queues;
 	unsigned long size;
+	int result;
 
-	nr_io_queues = max_io_queues();
+	/*
+	 * Sample the module parameters once at reset time so that we have
+	 * stable values to work with.
+	 */
+	dev->nr_write_queues = write_queues;
+	dev->nr_poll_queues = poll_queues;
 
 	/*
 	 * If tags are shared with admin queue (Apple bug), then
@@ -2120,6 +2123,9 @@ static int nvme_setup_io_queues(struct nvme_dev *dev)
 	 */
 	if (dev->ctrl.quirks & NVME_QUIRK_SHARED_TAGS)
 		nr_io_queues = 1;
+	else
+		nr_io_queues = min(nvme_max_io_queues(dev),
+				   dev->nr_allocated_queues - 1);
 
 	result = nvme_set_queue_count(&dev->ctrl, &nr_io_queues);
 	if (result < 0)
@@ -2794,8 +2800,11 @@ static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (!dev)
 		return -ENOMEM;
 
-	dev->queues = kcalloc_node(max_queue_count(), sizeof(struct nvme_queue),
-					GFP_KERNEL, node);
+	dev->nr_write_queues = write_queues;
+	dev->nr_poll_queues = poll_queues;
+	dev->nr_allocated_queues = nvme_max_io_queues(dev) + 1;
+	dev->queues = kcalloc_node(dev->nr_allocated_queues,
+			sizeof(struct nvme_queue), GFP_KERNEL, node);
 	if (!dev->queues)
 		goto free;
 
-- 
2.25.1

[PATCH 5.4 106/261] nvme-tcp: use bh_lock in data_ready

[Greg Kroah-Hartman]

From: Sagi Grimberg <sagi@grimberg.me>

[ Upstream commit 386e5e6e1aa90b479fcf0467935922df8524393d ]

data_ready may be invoked from send context or from
softirq, so need bh locking for that.

Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/tcp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index 11e84ed4de36..7900814355c2 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -784,11 +784,11 @@ static void nvme_tcp_data_ready(struct sock *sk)
 {
 	struct nvme_tcp_queue *queue;
 
-	read_lock(&sk->sk_callback_lock);
+	read_lock_bh(&sk->sk_callback_lock);
 	queue = sk->sk_user_data;
 	if (likely(queue && queue->rd_enabled))
 		queue_work_on(queue->io_cpu, nvme_tcp_wq, &queue->io_work);
-	read_unlock(&sk->sk_callback_lock);
+	read_unlock_bh(&sk->sk_callback_lock);
 }
 
 static void nvme_tcp_write_space(struct sock *sk)
-- 
2.25.1

[PATCH 5.4 107/261] ath10k: Remove msdu from idr when management pkt send fails

[Greg Kroah-Hartman]

From: Rakesh Pillai <pillair@codeaurora.org>

[ Upstream commit c730c477176ad4af86d9aae4d360a7ad840b073a ]

Currently when the sending of any management pkt
via wmi command fails, the packet is being unmapped
freed in the error handling. But the idr entry added,
which is used to track these packet is not getting removed.

Hence, during unload, in wmi cleanup, all the entries
in IDR are removed and the corresponding buffer is
attempted to be freed. This can cause a situation where
one packet is attempted to be freed twice.

Fix this error by rmeoving the msdu from the idr
list when the sending of a management packet over
wmi fails.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1

Fixes: 1807da49733e ("ath10k: wmi: add management tx by reference support over wmi")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1588667015-25490-1-git-send-email-pillair@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c     |  3 +++
 drivers/net/wireless/ath/ath10k/wmi-ops.h | 10 ++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 15 +++++++++++++++
 3 files changed, 28 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index c6ab1fcde84d..d373602a8014 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3911,6 +3911,9 @@ void ath10k_mgmt_over_wmi_tx_work(struct work_struct *work)
 			if (ret) {
 				ath10k_warn(ar, "failed to transmit management frame by ref via WMI: %d\n",
 					    ret);
+				/* remove this msdu from idr tracking */
+				ath10k_wmi_cleanup_mgmt_tx_send(ar, skb);
+
 				dma_unmap_single(ar->dev, paddr, skb->len,
 						 DMA_TO_DEVICE);
 				ieee80211_free_txskb(ar->hw, skb);
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 1491c25518bb..edccabc667e8 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -133,6 +133,7 @@ struct wmi_ops {
 	struct sk_buff *(*gen_mgmt_tx_send)(struct ath10k *ar,
 					    struct sk_buff *skb,
 					    dma_addr_t paddr);
+	int (*cleanup_mgmt_tx_send)(struct ath10k *ar, struct sk_buff *msdu);
 	struct sk_buff *(*gen_dbglog_cfg)(struct ath10k *ar, u64 module_enable,
 					  u32 log_level);
 	struct sk_buff *(*gen_pktlog_enable)(struct ath10k *ar, u32 filter);
@@ -441,6 +442,15 @@ ath10k_wmi_get_txbf_conf_scheme(struct ath10k *ar)
 	return ar->wmi.ops->get_txbf_conf_scheme(ar);
 }
 
+static inline int
+ath10k_wmi_cleanup_mgmt_tx_send(struct ath10k *ar, struct sk_buff *msdu)
+{
+	if (!ar->wmi.ops->cleanup_mgmt_tx_send)
+		return -EOPNOTSUPP;
+
+	return ar->wmi.ops->cleanup_mgmt_tx_send(ar, msdu);
+}
+
 static inline int
 ath10k_wmi_mgmt_tx_send(struct ath10k *ar, struct sk_buff *msdu,
 			dma_addr_t paddr)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index eb0c963d9fd5..9d5b9df29c35 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2837,6 +2837,18 @@ ath10k_wmi_tlv_op_gen_request_stats(struct ath10k *ar, u32 stats_mask)
 	return skb;
 }
 
+static int
+ath10k_wmi_tlv_op_cleanup_mgmt_tx_send(struct ath10k *ar,
+				       struct sk_buff *msdu)
+{
+	struct ath10k_skb_cb *cb = ATH10K_SKB_CB(msdu);
+	struct ath10k_wmi *wmi = &ar->wmi;
+
+	idr_remove(&wmi->mgmt_pending_tx, cb->msdu_id);
+
+	return 0;
+}
+
 static int
 ath10k_wmi_mgmt_tx_alloc_msdu_id(struct ath10k *ar, struct sk_buff *skb,
 				 dma_addr_t paddr)
@@ -2911,6 +2923,8 @@ ath10k_wmi_tlv_op_gen_mgmt_tx_send(struct ath10k *ar, struct sk_buff *msdu,
 	if (desc_id < 0)
 		goto err_free_skb;
 
+	cb->msdu_id = desc_id;
+
 	ptr = (void *)skb->data;
 	tlv = ptr;
 	tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_MGMT_TX_CMD);
@@ -4339,6 +4353,7 @@ static const struct wmi_ops wmi_tlv_ops = {
 	.gen_force_fw_hang = ath10k_wmi_tlv_op_gen_force_fw_hang,
 	/* .gen_mgmt_tx = not implemented; HTT is used */
 	.gen_mgmt_tx_send = ath10k_wmi_tlv_op_gen_mgmt_tx_send,
+	.cleanup_mgmt_tx_send = ath10k_wmi_tlv_op_cleanup_mgmt_tx_send,
 	.gen_dbglog_cfg = ath10k_wmi_tlv_op_gen_dbglog_cfg,
 	.gen_pktlog_enable = ath10k_wmi_tlv_op_gen_pktlog_enable,
 	.gen_pktlog_disable = ath10k_wmi_tlv_op_gen_pktlog_disable,
-- 
2.25.1

[PATCH 5.4 108/261] wcn36xx: Fix error handling path in wcn36xx_probe()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit a86308fc534edeceaf64670c691e17485436a4f4 ]

In case of error, 'qcom_wcnss_open_channel()' must be undone by a call to
'rpmsg_destroy_ept()', as already done in the remove function.

Fixes: 5052de8deff5 ("soc: qcom: smd: Transition client drivers from smd to rpmsg")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200507043619.200051-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wcn36xx/main.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index 79998a3ddb7a..ad051f34e65b 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -1341,7 +1341,7 @@ static int wcn36xx_probe(struct platform_device *pdev)
 	if (addr && ret != ETH_ALEN) {
 		wcn36xx_err("invalid local-mac-address\n");
 		ret = -EINVAL;
-		goto out_wq;
+		goto out_destroy_ept;
 	} else if (addr) {
 		wcn36xx_info("mac address: %pM\n", addr);
 		SET_IEEE80211_PERM_ADDR(wcn->hw, addr);
@@ -1349,7 +1349,7 @@ static int wcn36xx_probe(struct platform_device *pdev)
 
 	ret = wcn36xx_platform_get_resources(wcn, pdev);
 	if (ret)
-		goto out_wq;
+		goto out_destroy_ept;
 
 	wcn36xx_init_ieee80211(wcn);
 	ret = ieee80211_register_hw(wcn->hw);
@@ -1361,6 +1361,8 @@ static int wcn36xx_probe(struct platform_device *pdev)
 out_unmap:
 	iounmap(wcn->ccu_base);
 	iounmap(wcn->dxe_base);
+out_destroy_ept:
+	rpmsg_destroy_ept(wcn->smd_channel);
 out_wq:
 	ieee80211_free_hw(hw);
 out_err:
-- 
2.25.1

[PATCH 5.4 109/261] net: qed*: Reduce RX and TX default ring count when running inside kdump kernel

[Greg Kroah-Hartman]

From: Bhupesh Sharma <bhsharma@redhat.com>

[ Upstream commit 73e030977f7884dbe1be0018bab517e8d02760f8 ]

Normally kdump kernel(s) run under severe memory constraint with the
basic idea being to save the crashdump vmcore reliably when the primary
kernel panics/hangs.

Currently the qed* ethernet driver ends up consuming a lot of memory in
the kdump kernel, leading to kdump kernel panic when one tries to save
the vmcore via ssh/nfs (thus utilizing the services of the underlying
qed* network interfaces).

An example OOM message log seen in the kdump kernel can be seen here
[1], with crashkernel size reservation of 512M.

Using tools like memstrack (see [2]), we can track the modules taking up
the bulk of memory in the kdump kernel and organize the memory usage
output as per 'highest allocator first'. An example log for the OOM case
indicates that the qed* modules end up allocating approximately 216M
memory, which is a large part of the total crashkernel size:

 dracut-pre-pivot[676]: ======== Report format module_summary: ========
 dracut-pre-pivot[676]: Module qed using 149.6MB (2394 pages), peak allocation 149.6MB (2394 pages)
 dracut-pre-pivot[676]: Module qede using 65.3MB (1045 pages), peak allocation 65.3MB (1045 pages)

This patch reduces the default RX and TX ring count from 1024 to 64
when running inside kdump kernel, which leads to a significant memory
saving.

An example log with the patch applied shows the reduced memory
allocation in the kdump kernel:
 dracut-pre-pivot[674]: ======== Report format module_summary: ========
 dracut-pre-pivot[674]: Module qed using 141.8MB (2268 pages), peak allocation 141.8MB (2268 pages)
 <..snip..>
[dracut-pre-pivot[674]: Module qede using 4.8MB (76 pages), peak allocation 4.9MB (78 pages)

Tested crashdump vmcore save via ssh/nfs protocol using underlying qed*
network interface after applying this patch.

[1] OOM log:
------------

 kworker/0:6: page allocation failure: order:6,
 mode:0x60c0c0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null)
 kworker/0:6 cpuset=/ mems_allowed=0
 CPU: 0 PID: 145 Comm: kworker/0:6 Not tainted 4.18.0-109.el8.aarch64 #1
 Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL025
 01/18/2019
 Workqueue: events work_for_cpu_fn
 Call trace:
  dump_backtrace+0x0/0x188
  show_stack+0x24/0x30
  dump_stack+0x90/0xb4
  warn_alloc+0xf4/0x178
  __alloc_pages_nodemask+0xcac/0xd58
  alloc_pages_current+0x8c/0xf8
  kmalloc_order_trace+0x38/0x108
  qed_iov_alloc+0x40/0x248 [qed]
  qed_resc_alloc+0x224/0x518 [qed]
  qed_slowpath_start+0x254/0x928 [qed]
   __qede_probe+0xf8/0x5e0 [qede]
  qede_probe+0x68/0xd8 [qede]
  local_pci_probe+0x44/0xa8
  work_for_cpu_fn+0x20/0x30
  process_one_work+0x1ac/0x3e8
  worker_thread+0x44/0x448
  kthread+0x130/0x138
  ret_from_fork+0x10/0x18
  Cannot start slowpath
  qede: probe of 0000:05:00.1 failed with error -12

[2]. Memstrack tool: https://github.com/ryncsn/memstrack

Cc: kexec@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: Ariel Elior <aelior@marvell.com>
Cc: GR-everest-linux-l2@marvell.com
Cc: Manish Chopra <manishc@marvell.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qede/qede.h      |  2 ++
 drivers/net/ethernet/qlogic/qede/qede_main.c | 11 +++++++++--
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qede/qede.h b/drivers/net/ethernet/qlogic/qede/qede.h
index 1f27f9866b80..61b5aa3e5b98 100644
--- a/drivers/net/ethernet/qlogic/qede/qede.h
+++ b/drivers/net/ethernet/qlogic/qede/qede.h
@@ -574,12 +574,14 @@ int qede_add_tc_flower_fltr(struct qede_dev *edev, __be16 proto,
 #define RX_RING_SIZE		((u16)BIT(RX_RING_SIZE_POW))
 #define NUM_RX_BDS_MAX		(RX_RING_SIZE - 1)
 #define NUM_RX_BDS_MIN		128
+#define NUM_RX_BDS_KDUMP_MIN	63
 #define NUM_RX_BDS_DEF		((u16)BIT(10) - 1)
 
 #define TX_RING_SIZE_POW	13
 #define TX_RING_SIZE		((u16)BIT(TX_RING_SIZE_POW))
 #define NUM_TX_BDS_MAX		(TX_RING_SIZE - 1)
 #define NUM_TX_BDS_MIN		128
+#define NUM_TX_BDS_KDUMP_MIN	63
 #define NUM_TX_BDS_DEF		NUM_TX_BDS_MAX
 
 #define QEDE_MIN_PKT_LEN		64
diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index ba53612ae0df..1da6b5bda80a 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -29,6 +29,7 @@
  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  * SOFTWARE.
  */
+#include <linux/crash_dump.h>
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/version.h>
@@ -707,8 +708,14 @@ static struct qede_dev *qede_alloc_etherdev(struct qed_dev *cdev,
 	edev->dp_module = dp_module;
 	edev->dp_level = dp_level;
 	edev->ops = qed_ops;
-	edev->q_num_rx_buffers = NUM_RX_BDS_DEF;
-	edev->q_num_tx_buffers = NUM_TX_BDS_DEF;
+
+	if (is_kdump_kernel()) {
+		edev->q_num_rx_buffers = NUM_RX_BDS_KDUMP_MIN;
+		edev->q_num_tx_buffers = NUM_TX_BDS_KDUMP_MIN;
+	} else {
+		edev->q_num_rx_buffers = NUM_RX_BDS_DEF;
+		edev->q_num_tx_buffers = NUM_TX_BDS_DEF;
+	}
 
 	DP_INFO(edev, "Allocated netdev with %d tx queues and %d rx queues\n",
 		info->num_queues, info->num_queues);
-- 
2.25.1

[PATCH 5.4 110/261] drm/mcde: dsi: Fix return value check in mcde_dsi_bind()

[Greg Kroah-Hartman]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit 761e9f4f80a21a4b845097027030bef863001636 ]

The of_drm_find_bridge() function returns NULL on error, it doesn't return
error pointers so this check doesn't work.

Fixes: 5fc537bfd000 ("drm/mcde: Add new driver for ST-Ericsson MCDE")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430073145.52321-1-weiyongjun1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/mcde/mcde_dsi.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/mcde/mcde_dsi.c b/drivers/gpu/drm/mcde/mcde_dsi.c
index 35bb825d1918..8c8c92fc82e9 100644
--- a/drivers/gpu/drm/mcde/mcde_dsi.c
+++ b/drivers/gpu/drm/mcde/mcde_dsi.c
@@ -940,10 +940,9 @@ static int mcde_dsi_bind(struct device *dev, struct device *master,
 			panel = NULL;
 
 			bridge = of_drm_find_bridge(child);
-			if (IS_ERR(bridge)) {
-				dev_err(dev, "failed to find bridge (%ld)\n",
-					PTR_ERR(bridge));
-				return PTR_ERR(bridge);
+			if (!bridge) {
+				dev_err(dev, "failed to find bridge\n");
+				return -EINVAL;
 			}
 		}
 	}
-- 
2.25.1

[PATCH 5.4 111/261] mt76: avoid rx reorder buffer overflow

[Greg Kroah-Hartman]

From: Ryder Lee <ryder.lee@mediatek.com>

[ Upstream commit 7c4f744d6703757be959f521a7a441bf34745d99 ]

Enlarge slot to support 11ax 256 BA (256 MPDUs in an AMPDU)

Signed-off-by: Chih-Min Chen <chih-min.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/agg-rx.c | 8 ++++----
 drivers/net/wireless/mediatek/mt76/mt76.h   | 6 +++---
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/agg-rx.c b/drivers/net/wireless/mediatek/mt76/agg-rx.c
index 8f3d36a15e17..cbff0dfc9631 100644
--- a/drivers/net/wireless/mediatek/mt76/agg-rx.c
+++ b/drivers/net/wireless/mediatek/mt76/agg-rx.c
@@ -143,8 +143,8 @@ void mt76_rx_aggr_reorder(struct sk_buff *skb, struct sk_buff_head *frames)
 	struct ieee80211_sta *sta;
 	struct mt76_rx_tid *tid;
 	bool sn_less;
-	u16 seqno, head, size;
-	u8 ackp, idx;
+	u16 seqno, head, size, idx;
+	u8 ackp;
 
 	__skb_queue_tail(frames, skb);
 
@@ -230,7 +230,7 @@ out:
 }
 
 int mt76_rx_aggr_start(struct mt76_dev *dev, struct mt76_wcid *wcid, u8 tidno,
-		       u16 ssn, u8 size)
+		       u16 ssn, u16 size)
 {
 	struct mt76_rx_tid *tid;
 
@@ -254,7 +254,7 @@ EXPORT_SYMBOL_GPL(mt76_rx_aggr_start);
 
 static void mt76_rx_aggr_shutdown(struct mt76_dev *dev, struct mt76_rx_tid *tid)
 {
-	u8 size = tid->size;
+	u16 size = tid->size;
 	int i;
 
 	cancel_delayed_work(&tid->reorder_work);
diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 502814c26b33..52a16b42dfd7 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -240,8 +240,8 @@ struct mt76_rx_tid {
 	struct delayed_work reorder_work;
 
 	u16 head;
-	u8 size;
-	u8 nframes;
+	u16 size;
+	u16 nframes;
 
 	u8 started:1, stopped:1, timer_pending:1;
 
@@ -723,7 +723,7 @@ int mt76_get_survey(struct ieee80211_hw *hw, int idx,
 void mt76_set_stream_caps(struct mt76_dev *dev, bool vht);
 
 int mt76_rx_aggr_start(struct mt76_dev *dev, struct mt76_wcid *wcid, u8 tid,
-		       u16 ssn, u8 size);
+		       u16 ssn, u16 size);
 void mt76_rx_aggr_stop(struct mt76_dev *dev, struct mt76_wcid *wcid, u8 tid);
 
 void mt76_wcid_key_setup(struct mt76_dev *dev, struct mt76_wcid *wcid,
-- 
2.25.1

[PATCH 5.4 112/261] md: dont flush workqueue unconditionally in md_open

[Greg Kroah-Hartman]

From: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>

[ Upstream commit f6766ff6afff70e2aaf39e1511e16d471de7c3ae ]

We need to check mddev->del_work before flush workqueu since the purpose
of flush is to ensure the previous md is disappeared. Otherwise the similar
deadlock appeared if LOCKDEP is enabled, it is due to md_open holds the
bdev->bd_mutex before flush workqueue.

kernel: [  154.522645] ======================================================
kernel: [  154.522647] WARNING: possible circular locking dependency detected
kernel: [  154.522650] 5.6.0-rc7-lp151.27-default #25 Tainted: G           O
kernel: [  154.522651] ------------------------------------------------------
kernel: [  154.522653] mdadm/2482 is trying to acquire lock:
kernel: [  154.522655] ffff888078529128 ((wq_completion)md_misc){+.+.}, at: flush_workqueue+0x84/0x4b0
kernel: [  154.522673]
kernel: [  154.522673] but task is already holding lock:
kernel: [  154.522675] ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590
kernel: [  154.522691]
kernel: [  154.522691] which lock already depends on the new lock.
kernel: [  154.522691]
kernel: [  154.522694]
kernel: [  154.522694] the existing dependency chain (in reverse order) is:
kernel: [  154.522696]
kernel: [  154.522696] -> #4 (&bdev->bd_mutex){+.+.}:
kernel: [  154.522704]        __mutex_lock+0x87/0x950
kernel: [  154.522706]        __blkdev_get+0x79/0x590
kernel: [  154.522708]        blkdev_get+0x65/0x140
kernel: [  154.522709]        blkdev_get_by_dev+0x2f/0x40
kernel: [  154.522716]        lock_rdev+0x3d/0x90 [md_mod]
kernel: [  154.522719]        md_import_device+0xd6/0x1b0 [md_mod]
kernel: [  154.522723]        new_dev_store+0x15e/0x210 [md_mod]
kernel: [  154.522728]        md_attr_store+0x7a/0xc0 [md_mod]
kernel: [  154.522732]        kernfs_fop_write+0x117/0x1b0
kernel: [  154.522735]        vfs_write+0xad/0x1a0
kernel: [  154.522737]        ksys_write+0xa4/0xe0
kernel: [  154.522745]        do_syscall_64+0x64/0x2b0
kernel: [  154.522748]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
kernel: [  154.522749]
kernel: [  154.522749] -> #3 (&mddev->reconfig_mutex){+.+.}:
kernel: [  154.522752]        __mutex_lock+0x87/0x950
kernel: [  154.522756]        new_dev_store+0xc9/0x210 [md_mod]
kernel: [  154.522759]        md_attr_store+0x7a/0xc0 [md_mod]
kernel: [  154.522761]        kernfs_fop_write+0x117/0x1b0
kernel: [  154.522763]        vfs_write+0xad/0x1a0
kernel: [  154.522765]        ksys_write+0xa4/0xe0
kernel: [  154.522767]        do_syscall_64+0x64/0x2b0
kernel: [  154.522769]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
kernel: [  154.522770]
kernel: [  154.522770] -> #2 (kn->count#253){++++}:
kernel: [  154.522775]        __kernfs_remove+0x253/0x2c0
kernel: [  154.522778]        kernfs_remove+0x1f/0x30
kernel: [  154.522780]        kobject_del+0x28/0x60
kernel: [  154.522783]        mddev_delayed_delete+0x24/0x30 [md_mod]
kernel: [  154.522786]        process_one_work+0x2a7/0x5f0
kernel: [  154.522788]        worker_thread+0x2d/0x3d0
kernel: [  154.522793]        kthread+0x117/0x130
kernel: [  154.522795]        ret_from_fork+0x3a/0x50
kernel: [  154.522796]
kernel: [  154.522796] -> #1 ((work_completion)(&mddev->del_work)){+.+.}:
kernel: [  154.522800]        process_one_work+0x27e/0x5f0
kernel: [  154.522802]        worker_thread+0x2d/0x3d0
kernel: [  154.522804]        kthread+0x117/0x130
kernel: [  154.522806]        ret_from_fork+0x3a/0x50
kernel: [  154.522807]
kernel: [  154.522807] -> #0 ((wq_completion)md_misc){+.+.}:
kernel: [  154.522813]        __lock_acquire+0x1392/0x1690
kernel: [  154.522816]        lock_acquire+0xb4/0x1a0
kernel: [  154.522818]        flush_workqueue+0xab/0x4b0
kernel: [  154.522821]        md_open+0xb6/0xc0 [md_mod]
kernel: [  154.522823]        __blkdev_get+0xea/0x590
kernel: [  154.522825]        blkdev_get+0x65/0x140
kernel: [  154.522828]        do_dentry_open+0x1d1/0x380
kernel: [  154.522831]        path_openat+0x567/0xcc0
kernel: [  154.522834]        do_filp_open+0x9b/0x110
kernel: [  154.522836]        do_sys_openat2+0x201/0x2a0
kernel: [  154.522838]        do_sys_open+0x57/0x80
kernel: [  154.522840]        do_syscall_64+0x64/0x2b0
kernel: [  154.522842]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
kernel: [  154.522844]
kernel: [  154.522844] other info that might help us debug this:
kernel: [  154.522844]
kernel: [  154.522846] Chain exists of:
kernel: [  154.522846]   (wq_completion)md_misc --> &mddev->reconfig_mutex --> &bdev->bd_mutex
kernel: [  154.522846]
kernel: [  154.522850]  Possible unsafe locking scenario:
kernel: [  154.522850]
kernel: [  154.522852]        CPU0                    CPU1
kernel: [  154.522853]        ----                    ----
kernel: [  154.522854]   lock(&bdev->bd_mutex);
kernel: [  154.522856]                                lock(&mddev->reconfig_mutex);
kernel: [  154.522858]                                lock(&bdev->bd_mutex);
kernel: [  154.522860]   lock((wq_completion)md_misc);
kernel: [  154.522861]
kernel: [  154.522861]  *** DEADLOCK ***
kernel: [  154.522861]
kernel: [  154.522864] 1 lock held by mdadm/2482:
kernel: [  154.522865]  #0: ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590
kernel: [  154.522868]
kernel: [  154.522868] stack backtrace:
kernel: [  154.522873] CPU: 1 PID: 2482 Comm: mdadm Tainted: G           O      5.6.0-rc7-lp151.27-default #25
kernel: [  154.522875] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
kernel: [  154.522878] Call Trace:
kernel: [  154.522881]  dump_stack+0x8f/0xcb
kernel: [  154.522884]  check_noncircular+0x194/0x1b0
kernel: [  154.522888]  ? __lock_acquire+0x1392/0x1690
kernel: [  154.522890]  __lock_acquire+0x1392/0x1690
kernel: [  154.522893]  lock_acquire+0xb4/0x1a0
kernel: [  154.522895]  ? flush_workqueue+0x84/0x4b0
kernel: [  154.522898]  flush_workqueue+0xab/0x4b0
kernel: [  154.522900]  ? flush_workqueue+0x84/0x4b0
kernel: [  154.522905]  ? md_open+0xb6/0xc0 [md_mod]
kernel: [  154.522908]  md_open+0xb6/0xc0 [md_mod]
kernel: [  154.522910]  __blkdev_get+0xea/0x590
kernel: [  154.522912]  ? bd_acquire+0xc0/0xc0
kernel: [  154.522914]  blkdev_get+0x65/0x140
kernel: [  154.522916]  ? bd_acquire+0xc0/0xc0
kernel: [  154.522918]  do_dentry_open+0x1d1/0x380
kernel: [  154.522921]  path_openat+0x567/0xcc0
kernel: [  154.522923]  ? __lock_acquire+0x380/0x1690
kernel: [  154.522926]  do_filp_open+0x9b/0x110
kernel: [  154.522929]  ? __alloc_fd+0xe5/0x1f0
kernel: [  154.522935]  ? kmem_cache_alloc+0x28c/0x630
kernel: [  154.522939]  ? do_sys_openat2+0x201/0x2a0
kernel: [  154.522941]  do_sys_openat2+0x201/0x2a0
kernel: [  154.522944]  do_sys_open+0x57/0x80
kernel: [  154.522946]  do_syscall_64+0x64/0x2b0
kernel: [  154.522948]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
kernel: [  154.522951] RIP: 0033:0x7f98d279d9ae

And md_alloc also flushed the same workqueue, but the thing is different
here. Because all the paths call md_alloc don't hold bdev->bd_mutex, and
the flush is necessary to avoid race condition, so leave it as it is.

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 6b69a12ca2d8..5a378a453a2d 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7607,7 +7607,8 @@ static int md_open(struct block_device *bdev, fmode_t mode)
 		 */
 		mddev_put(mddev);
 		/* Wait until bdev->bd_disk is definitely gone */
-		flush_workqueue(md_misc_wq);
+		if (work_pending(&mddev->del_work))
+			flush_workqueue(md_misc_wq);
 		/* Then retry the open from the top */
 		return -ERESTARTSYS;
 	}
-- 
2.25.1

[PATCH 5.4 113/261] raid5: remove gfp flags from scribble_alloc()

[Greg Kroah-Hartman]

From: Coly Li <colyli@suse.de>

[ Upstream commit ba54d4d4d2844c234f1b4692bd8c9e0f833c8a54 ]

Using GFP_NOIO flag to call scribble_alloc() from resize_chunk() does
not have the expected behavior. kvmalloc_array() inside scribble_alloc()
which receives the GFP_NOIO flag will eventually call kmalloc_node() to
allocate physically continuous pages.

Now we have memalloc scope APIs in mddev_suspend()/mddev_resume() to
prevent memory reclaim I/Os during raid array suspend context, calling
to kvmalloc_array() with GFP_KERNEL flag may avoid deadlock of recursive
I/O as expected.

This patch removes the useless gfp flags from parameters list of
scribble_alloc(), and call kvmalloc_array() with GFP_KERNEL flag. The
incorrect GFP_NOIO flag does not exist anymore.

Fixes: b330e6a49dc3 ("md: convert to kvmalloc")
Suggested-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/raid5.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 36cd7c2fbf40..a3cbc9f4fec1 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2228,14 +2228,19 @@ static int grow_stripes(struct r5conf *conf, int num)
  * of the P and Q blocks.
  */
 static int scribble_alloc(struct raid5_percpu *percpu,
-			  int num, int cnt, gfp_t flags)
+			  int num, int cnt)
 {
 	size_t obj_size =
 		sizeof(struct page *) * (num+2) +
 		sizeof(addr_conv_t) * (num+2);
 	void *scribble;
 
-	scribble = kvmalloc_array(cnt, obj_size, flags);
+	/*
+	 * If here is in raid array suspend context, it is in memalloc noio
+	 * context as well, there is no potential recursive memory reclaim
+	 * I/Os with the GFP_KERNEL flag.
+	 */
+	scribble = kvmalloc_array(cnt, obj_size, GFP_KERNEL);
 	if (!scribble)
 		return -ENOMEM;
 
@@ -2267,8 +2272,7 @@ static int resize_chunks(struct r5conf *conf, int new_disks, int new_sectors)
 
 		percpu = per_cpu_ptr(conf->percpu, cpu);
 		err = scribble_alloc(percpu, new_disks,
-				     new_sectors / STRIPE_SECTORS,
-				     GFP_NOIO);
+				     new_sectors / STRIPE_SECTORS);
 		if (err)
 			break;
 	}
@@ -6765,8 +6769,7 @@ static int alloc_scratch_buffer(struct r5conf *conf, struct raid5_percpu *percpu
 			       conf->previous_raid_disks),
 			   max(conf->chunk_sectors,
 			       conf->prev_chunk_sectors)
-			   / STRIPE_SECTORS,
-			   GFP_KERNEL)) {
+			   / STRIPE_SECTORS)) {
 		free_scratch_buffer(conf, percpu);
 		return -ENOMEM;
 	}
-- 
2.25.1

[PATCH 5.4 114/261] iocost: dont let vrate run wild while theres no saturation signal

[Greg Kroah-Hartman]

From: Tejun Heo <tj@kernel.org>

[ Upstream commit 81ca627a933063fa63a6d4c66425de822a2ab7f5 ]

When the QoS targets are met and nothing is being throttled, there's
no way to tell how saturated the underlying device is - it could be
almost entirely idle, at the cusp of saturation or anywhere inbetween.
Given that there's no information, it's best to keep vrate as-is in
this state.  Before 7cd806a9a953 ("iocost: improve nr_lagging
handling"), this was the case - if the device isn't missing QoS
targets and nothing is being throttled, busy_level was reset to zero.

While fixing nr_lagging handling, 7cd806a9a953 ("iocost: improve
nr_lagging handling") broke this.  Now, while the device is hitting
QoS targets and nothing is being throttled, vrate keeps getting
adjusted according to the existing busy_level.

This led to vrate keeping climing till it hits max when there's an IO
issuer with limited request concurrency if the vrate started low.
vrate starts getting adjusted upwards until the issuer can issue IOs
w/o being throttled.  From then on, QoS targets keeps getting met and
nothing on the system needs throttling and vrate keeps getting
increased due to the existing busy_level.

This patch makes the following changes to the busy_level logic.

* Reset busy_level if nr_shortages is zero to avoid the above
  scenario.

* Make non-zero nr_lagging block lowering nr_level but still clear
  positive busy_level if there's clear non-saturation signal - QoS
  targets are met and nr_shortages is non-zero.  nr_lagging's role is
  preventing adjusting vrate upwards while there are long-running
  commands and it shouldn't keep busy_level positive while there's
  clear non-saturation signal.

* Restructure code for clarity and add comments.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Andy Newell <newella@fb.com>
Fixes: 7cd806a9a953 ("iocost: improve nr_lagging handling")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-iocost.c | 28 ++++++++++++++++++++++++----
 1 file changed, 24 insertions(+), 4 deletions(-)

diff --git a/block/blk-iocost.c b/block/blk-iocost.c
index d083f7704082..4d2bda812d9b 100644
--- a/block/blk-iocost.c
+++ b/block/blk-iocost.c
@@ -1546,19 +1546,39 @@ skip_surplus_transfers:
 	if (rq_wait_pct > RQ_WAIT_BUSY_PCT ||
 	    missed_ppm[READ] > ppm_rthr ||
 	    missed_ppm[WRITE] > ppm_wthr) {
+		/* clearly missing QoS targets, slow down vrate */
 		ioc->busy_level = max(ioc->busy_level, 0);
 		ioc->busy_level++;
 	} else if (rq_wait_pct <= RQ_WAIT_BUSY_PCT * UNBUSY_THR_PCT / 100 &&
 		   missed_ppm[READ] <= ppm_rthr * UNBUSY_THR_PCT / 100 &&
 		   missed_ppm[WRITE] <= ppm_wthr * UNBUSY_THR_PCT / 100) {
-		/* take action iff there is contention */
-		if (nr_shortages && !nr_lagging) {
+		/* QoS targets are being met with >25% margin */
+		if (nr_shortages) {
+			/*
+			 * We're throttling while the device has spare
+			 * capacity.  If vrate was being slowed down, stop.
+			 */
 			ioc->busy_level = min(ioc->busy_level, 0);
-			/* redistribute surpluses first */
-			if (!nr_surpluses)
+
+			/*
+			 * If there are IOs spanning multiple periods, wait
+			 * them out before pushing the device harder.  If
+			 * there are surpluses, let redistribution work it
+			 * out first.
+			 */
+			if (!nr_lagging && !nr_surpluses)
 				ioc->busy_level--;
+		} else {
+			/*
+			 * Nobody is being throttled and the users aren't
+			 * issuing enough IOs to saturate the device.  We
+			 * simply don't know how close the device is to
+			 * saturation.  Coast.
+			 */
+			ioc->busy_level = 0;
 		}
 	} else {
+		/* inside the hysterisis margin, we're good */
 		ioc->busy_level = 0;
 	}
 
-- 
2.25.1

[PATCH 5.4 115/261] veth: Adjust hard_start offset on redirect XDP frames

[Greg Kroah-Hartman]

From: Jesper Dangaard Brouer <brouer@redhat.com>

[ Upstream commit 5c8572251fabc5bb49fd623c064e95a9daf6a3e3 ]

When native XDP redirect into a veth device, the frame arrives in the
xdp_frame structure. It is then processed in veth_xdp_rcv_one(),
which can run a new XDP bpf_prog on the packet. Doing so requires
converting xdp_frame to xdp_buff, but the tricky part is that
xdp_frame memory area is located in the top (data_hard_start) memory
area that xdp_buff will point into.

The current code tried to protect the xdp_frame area, by assigning
xdp_buff.data_hard_start past this memory. This results in 32 bytes
less headroom to expand into via BPF-helper bpf_xdp_adjust_head().

This protect step is actually not needed, because BPF-helper
bpf_xdp_adjust_head() already reserve this area, and don't allow
BPF-prog to expand into it. Thus, it is safe to point data_hard_start
directly at xdp_frame memory area.

Fixes: 9fc8d518d9d5 ("veth: Handle xdp_frames in xdp napi ring")
Reported-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/158945338331.97035.5923525383710752178.stgit@firesoul
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/veth.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index 9f3c839f9e5f..88cfd63f08a6 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -510,13 +510,15 @@ static struct sk_buff *veth_xdp_rcv_one(struct veth_rq *rq,
 					struct veth_xdp_tx_bq *bq)
 {
 	void *hard_start = frame->data - frame->headroom;
-	void *head = hard_start - sizeof(struct xdp_frame);
 	int len = frame->len, delta = 0;
 	struct xdp_frame orig_frame;
 	struct bpf_prog *xdp_prog;
 	unsigned int headroom;
 	struct sk_buff *skb;
 
+	/* bpf_xdp_adjust_head() assures BPF cannot access xdp_frame area */
+	hard_start -= sizeof(struct xdp_frame);
+
 	rcu_read_lock();
 	xdp_prog = rcu_dereference(rq->xdp_prog);
 	if (likely(xdp_prog)) {
@@ -538,7 +540,6 @@ static struct sk_buff *veth_xdp_rcv_one(struct veth_rq *rq,
 			break;
 		case XDP_TX:
 			orig_frame = *frame;
-			xdp.data_hard_start = head;
 			xdp.rxq->mem = frame->mem;
 			if (unlikely(veth_xdp_tx(rq->dev, &xdp, bq) < 0)) {
 				trace_xdp_exception(rq->dev, xdp_prog, act);
@@ -550,7 +551,6 @@ static struct sk_buff *veth_xdp_rcv_one(struct veth_rq *rq,
 			goto xdp_xmit;
 		case XDP_REDIRECT:
 			orig_frame = *frame;
-			xdp.data_hard_start = head;
 			xdp.rxq->mem = frame->mem;
 			if (xdp_do_redirect(rq->dev, &xdp, xdp_prog)) {
 				frame = &orig_frame;
@@ -572,7 +572,7 @@ static struct sk_buff *veth_xdp_rcv_one(struct veth_rq *rq,
 	rcu_read_unlock();
 
 	headroom = sizeof(struct xdp_frame) + frame->headroom - delta;
-	skb = veth_build_skb(head, headroom, len, 0);
+	skb = veth_build_skb(hard_start, headroom, len, 0);
 	if (!skb) {
 		xdp_return_frame(frame);
 		goto err;
-- 
2.25.1

[PATCH 5.4 116/261] net/mlx5e: IPoIB, Drop multicast packets that this interface sent

[Greg Kroah-Hartman]

From: Erez Shitrit <erezsh@mellanox.com>

[ Upstream commit 8b46d424a743ddfef8056d5167f13ee7ebd1dcad ]

After enabled loopback packets for IPoIB, we need to drop these packets
that this HCA has replicated and came back to the same interface that
sent them.

Fixes: 4c6c615e3f30 ("net/mlx5e: IPoIB, Add PKEY child interface nic profile")
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
index c4eed5bbcd45..066bada4ccd1 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
@@ -1428,6 +1428,7 @@ out:
 
 #ifdef CONFIG_MLX5_CORE_IPOIB
 
+#define MLX5_IB_GRH_SGID_OFFSET 8
 #define MLX5_IB_GRH_DGID_OFFSET 24
 #define MLX5_GID_SIZE           16
 
@@ -1441,6 +1442,7 @@ static inline void mlx5i_complete_rx_cqe(struct mlx5e_rq *rq,
 	struct net_device *netdev;
 	struct mlx5e_priv *priv;
 	char *pseudo_header;
+	u32 flags_rqpn;
 	u32 qpn;
 	u8 *dgid;
 	u8 g;
@@ -1462,7 +1464,8 @@ static inline void mlx5i_complete_rx_cqe(struct mlx5e_rq *rq,
 	tstamp = &priv->tstamp;
 	stats = &priv->channel_stats[rq->ix].rq;
 
-	g = (be32_to_cpu(cqe->flags_rqpn) >> 28) & 3;
+	flags_rqpn = be32_to_cpu(cqe->flags_rqpn);
+	g = (flags_rqpn >> 28) & 3;
 	dgid = skb->data + MLX5_IB_GRH_DGID_OFFSET;
 	if ((!g) || dgid[0] != 0xff)
 		skb->pkt_type = PACKET_HOST;
@@ -1471,9 +1474,15 @@ static inline void mlx5i_complete_rx_cqe(struct mlx5e_rq *rq,
 	else
 		skb->pkt_type = PACKET_MULTICAST;
 
-	/* TODO: IB/ipoib: Allow mcast packets from other VFs
-	 * 68996a6e760e5c74654723eeb57bf65628ae87f4
+	/* Drop packets that this interface sent, ie multicast packets
+	 * that the HCA has replicated.
 	 */
+	if (g && (qpn == (flags_rqpn & 0xffffff)) &&
+	    (memcmp(netdev->dev_addr + 4, skb->data + MLX5_IB_GRH_SGID_OFFSET,
+		    MLX5_GID_SIZE) == 0)) {
+		skb->dev = NULL;
+		return;
+	}
 
 	skb_pull(skb, MLX5_IB_GRH_BYTES);
 
-- 
2.25.1

[PATCH 5.4 117/261] rtlwifi: Fix a double free in _rtl_usb_tx_urb_setup()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit beb12813bc75d4a23de43b85ad1c7cb28d27631e ]

Seven years ago we tried to fix a leak but actually introduced a double
free instead.  It was an understandable mistake because the code was a
bit confusing and the free was done in the wrong place.  The "skb"
pointer is freed in both _rtl_usb_tx_urb_setup() and _rtl_usb_transmit().
The free belongs _rtl_usb_transmit() instead of _rtl_usb_tx_urb_setup()
and I've cleaned the code up a bit to hopefully make it more clear.

Fixes: 36ef0b473fbf ("rtlwifi: usb: add missing freeing of skbuff")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200513093951.GD347693@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtlwifi/usb.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c
index 348b0072cdd6..c66c6dc00378 100644
--- a/drivers/net/wireless/realtek/rtlwifi/usb.c
+++ b/drivers/net/wireless/realtek/rtlwifi/usb.c
@@ -881,10 +881,8 @@ static struct urb *_rtl_usb_tx_urb_setup(struct ieee80211_hw *hw,
 
 	WARN_ON(NULL == skb);
 	_urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (!_urb) {
-		kfree_skb(skb);
+	if (!_urb)
 		return NULL;
-	}
 	_rtl_install_trx_info(rtlusb, skb, ep_num);
 	usb_fill_bulk_urb(_urb, rtlusb->udev, usb_sndbulkpipe(rtlusb->udev,
 			  ep_num), skb->data, skb->len, _rtl_tx_complete, skb);
@@ -898,7 +896,6 @@ static void _rtl_usb_transmit(struct ieee80211_hw *hw, struct sk_buff *skb,
 	struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
 	u32 ep_num;
 	struct urb *_urb = NULL;
-	struct sk_buff *_skb = NULL;
 
 	WARN_ON(NULL == rtlusb->usb_tx_aggregate_hdl);
 	if (unlikely(IS_USB_STOP(rtlusb))) {
@@ -907,8 +904,7 @@ static void _rtl_usb_transmit(struct ieee80211_hw *hw, struct sk_buff *skb,
 		return;
 	}
 	ep_num = rtlusb->ep_map.ep_mapping[qnum];
-	_skb = skb;
-	_urb = _rtl_usb_tx_urb_setup(hw, _skb, ep_num);
+	_urb = _rtl_usb_tx_urb_setup(hw, skb, ep_num);
 	if (unlikely(!_urb)) {
 		pr_err("Can't allocate urb. Drop skb!\n");
 		kfree_skb(skb);
-- 
2.25.1

[PATCH 5.4 118/261] mwifiex: Fix memory corruption in dump_station

[Greg Kroah-Hartman]

From: Pali Rohár <pali@kernel.org>

[ Upstream commit 3aa42bae9c4d1641aeb36f1a8585cd1d506cf471 ]

The mwifiex_cfg80211_dump_station() uses static variable for iterating
over a linked list of all associated stations (when the driver is in UAP
role). This has a race condition if .dump_station is called in parallel
for multiple interfaces. This corruption can be triggered by registering
multiple SSIDs and calling, in parallel for multiple interfaces
    iw dev <iface> station dump

[16750.719775] Unable to handle kernel paging request at virtual address dead000000000110
...
[16750.899173] Call trace:
[16750.901696]  mwifiex_cfg80211_dump_station+0x94/0x100 [mwifiex]
[16750.907824]  nl80211_dump_station+0xbc/0x278 [cfg80211]
[16750.913160]  netlink_dump+0xe8/0x320
[16750.916827]  netlink_recvmsg+0x1b4/0x338
[16750.920861]  ____sys_recvmsg+0x7c/0x2b0
[16750.924801]  ___sys_recvmsg+0x70/0x98
[16750.928564]  __sys_recvmsg+0x58/0xa0
[16750.932238]  __arm64_sys_recvmsg+0x28/0x30
[16750.936453]  el0_svc_common.constprop.3+0x90/0x158
[16750.941378]  do_el0_svc+0x74/0x90
[16750.944784]  el0_sync_handler+0x12c/0x1a8
[16750.948903]  el0_sync+0x114/0x140
[16750.952312] Code: f9400003 f907f423 eb02007f 54fffd60 (b9401060)
[16750.958583] ---[ end trace c8ad181c2f4b8576 ]---

This patch drops the use of the static iterator, and instead every time
the function is called iterates to the idx-th position of the
linked-list.

It would be better to convert the code not to use linked list for
associated stations storage (since the chip has a limited number of
associated stations anyway - it could just be an array). Such a change
may be proposed in the future. In the meantime this patch can backported
into stable kernels in this simple form.

Fixes: 8baca1a34d4c ("mwifiex: dump station support in uap mode")
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200515075924.13841-1-pali@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/cfg80211.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index d89684168500..9e6dc289ec3e 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -1496,7 +1496,8 @@ mwifiex_cfg80211_dump_station(struct wiphy *wiphy, struct net_device *dev,
 			      int idx, u8 *mac, struct station_info *sinfo)
 {
 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
-	static struct mwifiex_sta_node *node;
+	struct mwifiex_sta_node *node;
+	int i;
 
 	if ((GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) &&
 	    priv->media_connected && idx == 0) {
@@ -1506,13 +1507,10 @@ mwifiex_cfg80211_dump_station(struct wiphy *wiphy, struct net_device *dev,
 		mwifiex_send_cmd(priv, HOST_CMD_APCMD_STA_LIST,
 				 HostCmd_ACT_GEN_GET, 0, NULL, true);
 
-		if (node && (&node->list == &priv->sta_list)) {
-			node = NULL;
-			return -ENOENT;
-		}
-
-		node = list_prepare_entry(node, &priv->sta_list, list);
-		list_for_each_entry_continue(node, &priv->sta_list, list) {
+		i = 0;
+		list_for_each_entry(node, &priv->sta_list, list) {
+			if (i++ != idx)
+				continue;
 			ether_addr_copy(mac, node->mac_addr);
 			return mwifiex_dump_station_info(priv, node, sinfo);
 		}
-- 
2.25.1

[PATCH 5.4 119/261] kgdboc: Use a platform device to handle tty drivers showing up late

[Greg Kroah-Hartman]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 68e55f61c13842baf825958129698c5371db432c ]

If you build CONFIG_KGDB_SERIAL_CONSOLE into the kernel then you
should be able to have KGDB init itself at bootup by specifying the
"kgdboc=..." kernel command line parameter.  This has worked OK for me
for many years, but on a new device I switched to it stopped working.

The problem is that on this new device the serial driver gets its
probe deferred.  Now when kgdb initializes it can't find the tty
driver and when it gives up it never tries again.

We could try to find ways to move up the initialization of the serial
driver and such a thing might be worthwhile, but it's nice to be
robust against serial drivers that load late.  We could move kgdb to
init itself later but that penalizes our ability to debug early boot
code on systems where the driver inits early.  We could roll our own
system of detecting when new tty drivers get loaded and then use that
to figure out when kgdb can init, but that's ugly.

Instead, let's jump on the -EPROBE_DEFER bandwagon.  We'll create a
singleton instance of a "kgdboc" platform device.  If we can't find
our tty device when the singleton "kgdboc" probes we'll return
-EPROBE_DEFER which means that the system will call us back later to
try again when the tty device might be there.

We won't fully transition all of the kgdboc to a platform device
because early kgdb initialization (via the "ekgdboc" kernel command
line parameter) still runs before the platform device has been
created.  The kgdb platform device is merely used as a convenient way
to hook into the system's normal probe deferral mechanisms.

As part of this, we'll ever-so-slightly change how the "kgdboc=..."
kernel command line parameter works.  Previously if you booted up and
kgdb couldn't find the tty driver then later reading
'/sys/module/kgdboc/parameters/kgdboc' would return a blank string.
Now kgdb will keep track of the string that came as part of the
command line and give it back to you.  It's expected that this should
be an OK change.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200507130644.v4.3.I4a493cfb0f9f740ce8fd2ab58e62dc92d18fed30@changeid
[daniel.thompson@linaro.org: Make config_mutex static]
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/kgdboc.c | 126 +++++++++++++++++++++++++++++-------
 1 file changed, 101 insertions(+), 25 deletions(-)

diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index c7d51b51898f..f5608ad68ae1 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -20,6 +20,7 @@
 #include <linux/vt_kern.h>
 #include <linux/input.h>
 #include <linux/module.h>
+#include <linux/platform_device.h>
 
 #define MAX_CONFIG_LEN		40
 
@@ -27,6 +28,7 @@ static struct kgdb_io		kgdboc_io_ops;
 
 /* -1 = init not run yet, 0 = unconfigured, 1 = configured. */
 static int configured		= -1;
+static DEFINE_MUTEX(config_mutex);
 
 static char config[MAX_CONFIG_LEN];
 static struct kparam_string kps = {
@@ -38,6 +40,8 @@ static int kgdboc_use_kms;  /* 1 if we use kernel mode switching */
 static struct tty_driver	*kgdb_tty_driver;
 static int			kgdb_tty_line;
 
+static struct platform_device *kgdboc_pdev;
+
 #ifdef CONFIG_KDB_KEYBOARD
 static int kgdboc_reset_connect(struct input_handler *handler,
 				struct input_dev *dev,
@@ -133,11 +137,13 @@ static void kgdboc_unregister_kbd(void)
 
 static void cleanup_kgdboc(void)
 {
+	if (configured != 1)
+		return;
+
 	if (kgdb_unregister_nmi_console())
 		return;
 	kgdboc_unregister_kbd();
-	if (configured == 1)
-		kgdb_unregister_io_module(&kgdboc_io_ops);
+	kgdb_unregister_io_module(&kgdboc_io_ops);
 }
 
 static int configure_kgdboc(void)
@@ -200,20 +206,79 @@ nmi_con_failed:
 	kgdb_unregister_io_module(&kgdboc_io_ops);
 noconfig:
 	kgdboc_unregister_kbd();
-	config[0] = 0;
 	configured = 0;
-	cleanup_kgdboc();
 
 	return err;
 }
 
+static int kgdboc_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+
+	mutex_lock(&config_mutex);
+	if (configured != 1) {
+		ret = configure_kgdboc();
+
+		/* Convert "no device" to "defer" so we'll keep trying */
+		if (ret == -ENODEV)
+			ret = -EPROBE_DEFER;
+	}
+	mutex_unlock(&config_mutex);
+
+	return ret;
+}
+
+static struct platform_driver kgdboc_platform_driver = {
+	.probe = kgdboc_probe,
+	.driver = {
+		.name = "kgdboc",
+		.suppress_bind_attrs = true,
+	},
+};
+
 static int __init init_kgdboc(void)
 {
-	/* Already configured? */
-	if (configured == 1)
+	int ret;
+
+	/*
+	 * kgdboc is a little bit of an odd "platform_driver".  It can be
+	 * up and running long before the platform_driver object is
+	 * created and thus doesn't actually store anything in it.  There's
+	 * only one instance of kgdb so anything is stored as global state.
+	 * The platform_driver is only created so that we can leverage the
+	 * kernel's mechanisms (like -EPROBE_DEFER) to call us when our
+	 * underlying tty is ready.  Here we init our platform driver and
+	 * then create the single kgdboc instance.
+	 */
+	ret = platform_driver_register(&kgdboc_platform_driver);
+	if (ret)
+		return ret;
+
+	kgdboc_pdev = platform_device_alloc("kgdboc", PLATFORM_DEVID_NONE);
+	if (!kgdboc_pdev) {
+		ret = -ENOMEM;
+		goto err_did_register;
+	}
+
+	ret = platform_device_add(kgdboc_pdev);
+	if (!ret)
 		return 0;
 
-	return configure_kgdboc();
+	platform_device_put(kgdboc_pdev);
+
+err_did_register:
+	platform_driver_unregister(&kgdboc_platform_driver);
+	return ret;
+}
+
+static void exit_kgdboc(void)
+{
+	mutex_lock(&config_mutex);
+	cleanup_kgdboc();
+	mutex_unlock(&config_mutex);
+
+	platform_device_unregister(kgdboc_pdev);
+	platform_driver_unregister(&kgdboc_platform_driver);
 }
 
 static int kgdboc_get_char(void)
@@ -236,24 +301,20 @@ static int param_set_kgdboc_var(const char *kmessage,
 				const struct kernel_param *kp)
 {
 	size_t len = strlen(kmessage);
+	int ret = 0;
 
 	if (len >= MAX_CONFIG_LEN) {
 		pr_err("config string too long\n");
 		return -ENOSPC;
 	}
 
-	/* Only copy in the string if the init function has not run yet */
-	if (configured < 0) {
-		strcpy(config, kmessage);
-		return 0;
-	}
-
 	if (kgdb_connected) {
 		pr_err("Cannot reconfigure while KGDB is connected.\n");
-
 		return -EBUSY;
 	}
 
+	mutex_lock(&config_mutex);
+
 	strcpy(config, kmessage);
 	/* Chop out \n char as a result of echo */
 	if (len && config[len - 1] == '\n')
@@ -262,8 +323,30 @@ static int param_set_kgdboc_var(const char *kmessage,
 	if (configured == 1)
 		cleanup_kgdboc();
 
-	/* Go and configure with the new params. */
-	return configure_kgdboc();
+	/*
+	 * Configure with the new params as long as init already ran.
+	 * Note that we can get called before init if someone loads us
+	 * with "modprobe kgdboc kgdboc=..." or if they happen to use the
+	 * the odd syntax of "kgdboc.kgdboc=..." on the kernel command.
+	 */
+	if (configured >= 0)
+		ret = configure_kgdboc();
+
+	/*
+	 * If we couldn't configure then clear out the config.  Note that
+	 * specifying an invalid config on the kernel command line vs.
+	 * through sysfs have slightly different behaviors.  If we fail
+	 * to configure what was specified on the kernel command line
+	 * we'll leave it in the 'config' and return -EPROBE_DEFER from
+	 * our probe.  When specified through sysfs userspace is
+	 * responsible for loading the tty driver before setting up.
+	 */
+	if (ret)
+		config[0] = '\0';
+
+	mutex_unlock(&config_mutex);
+
+	return ret;
 }
 
 static int dbg_restore_graphics;
@@ -326,15 +409,8 @@ __setup("kgdboc=", kgdboc_option_setup);
 /* This is only available if kgdboc is a built in for early debugging */
 static int __init kgdboc_early_init(char *opt)
 {
-	/* save the first character of the config string because the
-	 * init routine can destroy it.
-	 */
-	char save_ch;
-
 	kgdboc_option_setup(opt);
-	save_ch = config[0];
-	init_kgdboc();
-	config[0] = save_ch;
+	configure_kgdboc();
 	return 0;
 }
 
@@ -342,7 +418,7 @@ early_param("ekgdboc", kgdboc_early_init);
 #endif /* CONFIG_KGDB_SERIAL_CONSOLE */
 
 module_init(init_kgdboc);
-module_exit(cleanup_kgdboc);
+module_exit(exit_kgdboc);
 module_param_call(kgdboc, param_set_kgdboc_var, param_get_string, &kps, 0644);
 MODULE_PARM_DESC(kgdboc, "<serial_device>[,baud]");
 MODULE_DESCRIPTION("KGDB Console TTY Driver");
-- 
2.25.1

[PATCH 5.4 120/261] x86/boot: Correct relocation destination on old linkers

[Greg Kroah-Hartman]

From: Arvind Sankar <nivedita@alum.mit.edu>

[ Upstream commit 5214028dd89e49ba27007c3ee475279e584261f0 ]

For the 32-bit kernel, as described in

  6d92bc9d483a ("x86/build: Build compressed x86 kernels as PIE"),

pre-2.26 binutils generates R_386_32 relocations in PIE mode. Since the
startup code does not perform relocation, any reloc entry with R_386_32
will remain as 0 in the executing code.

Commit

  974f221c84b0 ("x86/boot: Move compressed kernel to the end of the
                 decompression buffer")

added a new symbol _end but did not mark it hidden, which doesn't give
the correct offset on older linkers. This causes the compressed kernel
to be copied beyond the end of the decompression buffer, rather than
flush against it. This region of memory may be reserved or already
allocated for other purposes by the bootloader.

Mark _end as hidden to fix. This changes the relocation from R_386_32 to
R_386_RELATIVE even on the pre-2.26 binutils.

For 64-bit, this is not strictly necessary, as the 64-bit kernel is only
built as PIE if the linker supports -z noreloc-overflow, which implies
binutils-2.27+, but for consistency, mark _end as hidden here too.

The below illustrates the before/after impact of the patch using
binutils-2.25 and gcc-4.6.4 (locally compiled from source) and QEMU.

  Disassembly before patch:
    48:   8b 86 60 02 00 00       mov    0x260(%esi),%eax
    4e:   2d 00 00 00 00          sub    $0x0,%eax
                          4f: R_386_32    _end
  Disassembly after patch:
    48:   8b 86 60 02 00 00       mov    0x260(%esi),%eax
    4e:   2d 00 f0 76 00          sub    $0x76f000,%eax
                          4f: R_386_RELATIVE      *ABS*

Dump from extract_kernel before patch:
	early console in extract_kernel
	input_data: 0x0207c098 <--- this is at output + init_size
	input_len: 0x0074fef1
	output: 0x01000000
	output_len: 0x00fa63d0
	kernel_total_size: 0x0107c000
	needed_size: 0x0107c000

Dump from extract_kernel after patch:
	early console in extract_kernel
	input_data: 0x0190d098 <--- this is at output + init_size - _end
	input_len: 0x0074fef1
	output: 0x01000000
	output_len: 0x00fa63d0
	kernel_total_size: 0x0107c000
	needed_size: 0x0107c000

Fixes: 974f221c84b0 ("x86/boot: Move compressed kernel to the end of the decompression buffer")
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200207214926.3564079-1-nivedita@alum.mit.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/boot/compressed/head_32.S | 5 +++--
 arch/x86/boot/compressed/head_64.S | 1 +
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 70ffce98c568..d7c0fcc1dbf9 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -49,16 +49,17 @@
  * Position Independent Executable (PIE) so that linker won't optimize
  * R_386_GOT32X relocation to its fixed symbol address.  Older
  * linkers generate R_386_32 relocations against locally defined symbols,
- * _bss, _ebss, _got and _egot, in PIE.  It isn't wrong, just less
+ * _bss, _ebss, _got, _egot and _end, in PIE.  It isn't wrong, just less
  * optimal than R_386_RELATIVE.  But the x86 kernel fails to properly handle
  * R_386_32 relocations when relocating the kernel.  To generate
- * R_386_RELATIVE relocations, we mark _bss, _ebss, _got and _egot as
+ * R_386_RELATIVE relocations, we mark _bss, _ebss, _got, _egot and _end as
  * hidden:
  */
 	.hidden _bss
 	.hidden _ebss
 	.hidden _got
 	.hidden _egot
+	.hidden _end
 
 	__HEAD
 ENTRY(startup_32)
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 07d2002da642..50c9eeb36f0d 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -42,6 +42,7 @@
 	.hidden _ebss
 	.hidden _got
 	.hidden _egot
+	.hidden _end
 
 	__HEAD
 	.code32
-- 
2.25.1

[PATCH 5.4 121/261] sched: Defend cfs and rt bandwidth quota against overflow

[Greg Kroah-Hartman]

From: Huaixin Chang <changhuaixin@linux.alibaba.com>

[ Upstream commit d505b8af58912ae1e1a211fabc9995b19bd40828 ]

When users write some huge number into cpu.cfs_quota_us or
cpu.rt_runtime_us, overflow might happen during to_ratio() shifts of
schedulable checks.

to_ratio() could be altered to avoid unnecessary internal overflow, but
min_cfs_quota_period is less than 1 << BW_SHIFT, so a cutoff would still
be needed. Set a cap MAX_BW for cfs_quota_us and rt_runtime_us to
prevent overflow.

Signed-off-by: Huaixin Chang <changhuaixin@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Link: https://lkml.kernel.org/r/20200425105248.60093-1-changhuaixin@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/core.c  |  8 ++++++++
 kernel/sched/rt.c    | 12 +++++++++++-
 kernel/sched/sched.h |  2 ++
 3 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 4874e1468279..361cbc2dc966 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -7374,6 +7374,8 @@ static DEFINE_MUTEX(cfs_constraints_mutex);
 
 const u64 max_cfs_quota_period = 1 * NSEC_PER_SEC; /* 1s */
 static const u64 min_cfs_quota_period = 1 * NSEC_PER_MSEC; /* 1ms */
+/* More than 203 days if BW_SHIFT equals 20. */
+static const u64 max_cfs_runtime = MAX_BW * NSEC_PER_USEC;
 
 static int __cfs_schedulable(struct task_group *tg, u64 period, u64 runtime);
 
@@ -7401,6 +7403,12 @@ static int tg_set_cfs_bandwidth(struct task_group *tg, u64 period, u64 quota)
 	if (period > max_cfs_quota_period)
 		return -EINVAL;
 
+	/*
+	 * Bound quota to defend quota against overflow during bandwidth shift.
+	 */
+	if (quota != RUNTIME_INF && quota > max_cfs_runtime)
+		return -EINVAL;
+
 	/*
 	 * Prevent race between setting of cfs_rq->runtime_enabled and
 	 * unthrottle_offline_cfs_rqs().
diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c
index 7bf917e4d63a..5b04bba4500d 100644
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -9,6 +9,8 @@
 
 int sched_rr_timeslice = RR_TIMESLICE;
 int sysctl_sched_rr_timeslice = (MSEC_PER_SEC / HZ) * RR_TIMESLICE;
+/* More than 4 hours if BW_SHIFT equals 20. */
+static const u64 max_rt_runtime = MAX_BW;
 
 static int do_sched_rt_period_timer(struct rt_bandwidth *rt_b, int overrun);
 
@@ -2513,6 +2515,12 @@ static int tg_set_rt_bandwidth(struct task_group *tg,
 	if (rt_period == 0)
 		return -EINVAL;
 
+	/*
+	 * Bound quota to defend quota against overflow during bandwidth shift.
+	 */
+	if (rt_runtime != RUNTIME_INF && rt_runtime > max_rt_runtime)
+		return -EINVAL;
+
 	mutex_lock(&rt_constraints_mutex);
 	read_lock(&tasklist_lock);
 	err = __rt_schedulable(tg, rt_period, rt_runtime);
@@ -2634,7 +2642,9 @@ static int sched_rt_global_validate(void)
 		return -EINVAL;
 
 	if ((sysctl_sched_rt_runtime != RUNTIME_INF) &&
-		(sysctl_sched_rt_runtime > sysctl_sched_rt_period))
+		((sysctl_sched_rt_runtime > sysctl_sched_rt_period) ||
+		 ((u64)sysctl_sched_rt_runtime *
+			NSEC_PER_USEC > max_rt_runtime)))
 		return -EINVAL;
 
 	return 0;
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index c7e7481968bf..570659f1c6e2 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -1889,6 +1889,8 @@ extern void init_dl_rq_bw_ratio(struct dl_rq *dl_rq);
 #define BW_SHIFT		20
 #define BW_UNIT			(1 << BW_SHIFT)
 #define RATIO_SHIFT		8
+#define MAX_BW_BITS		(64 - BW_SHIFT)
+#define MAX_BW			((1ULL << MAX_BW_BITS) - 1)
 unsigned long to_ratio(u64 period, u64 runtime);
 
 extern void init_entity_runnable_average(struct sched_entity *se);
-- 
2.25.1

[PATCH 5.4 122/261] mips: MAAR: Use more precise address mask

[Greg Kroah-Hartman]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

[ Upstream commit bbb5946eb545fab8ad8f46bce8a803e1c0c39d47 ]

Indeed according to the MIPS32 Privileged Resource Architecgture the MAAR
pair register address field either takes [12:31] bits for non-XPA systems
and [12:55] otherwise. In any case the current address mask is just
wrong for 64-bit and 32-bits XPA chips. So lets extend it to 59-bits
of physical address value. This shall cover the 64-bits architecture and
systems with XPA enabled, and won't cause any problem for non-XPA 32-bit
systems, since address values exceeding the architecture specific MAAR
mask will be just truncated with setting zeros in the unsupported upper
bits.

Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/include/asm/mipsregs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index bdbdc19a2b8f..3afdb39d092a 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -750,7 +750,7 @@
 
 /* MAAR bit definitions */
 #define MIPS_MAAR_VH		(_U64CAST_(1) << 63)
-#define MIPS_MAAR_ADDR		((BIT_ULL(BITS_PER_LONG - 12) - 1) << 12)
+#define MIPS_MAAR_ADDR		GENMASK_ULL(55, 12)
 #define MIPS_MAAR_ADDR_SHIFT	12
 #define MIPS_MAAR_S		(_ULCAST_(1) << 1)
 #define MIPS_MAAR_VL		(_ULCAST_(1) << 0)
-- 
2.25.1

[PATCH 5.4 123/261] mips: Add udelay lpj numbers adjustment

[Greg Kroah-Hartman]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

[ Upstream commit ed26aacfb5f71eecb20a51c4467da440cb719d66 ]

Loops-per-jiffies is a special number which represents a number of
noop-loop cycles per CPU-scheduler quantum - jiffies. As you
understand aside from CPU-specific implementation it depends on
the CPU frequency. So when a platform has the CPU frequency fixed,
we have no problem and the current udelay interface will work
just fine. But as soon as CPU-freq driver is enabled and the cores
frequency changes, we'll end up with distorted udelay's. In order
to fix this we have to accordinly adjust the per-CPU udelay_val
(the same as the global loops_per_jiffy) number. This can be done
in the CPU-freq transition event handler. We subscribe to that event
in the MIPS arch time-inititalization method.

Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/kernel/time.c | 70 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 37e9413a393d..caa01457dce6 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -18,12 +18,82 @@
 #include <linux/smp.h>
 #include <linux/spinlock.h>
 #include <linux/export.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
 
 #include <asm/cpu-features.h>
 #include <asm/cpu-type.h>
 #include <asm/div64.h>
 #include <asm/time.h>
 
+#ifdef CONFIG_CPU_FREQ
+
+static DEFINE_PER_CPU(unsigned long, pcp_lpj_ref);
+static DEFINE_PER_CPU(unsigned long, pcp_lpj_ref_freq);
+static unsigned long glb_lpj_ref;
+static unsigned long glb_lpj_ref_freq;
+
+static int cpufreq_callback(struct notifier_block *nb,
+			    unsigned long val, void *data)
+{
+	struct cpufreq_freqs *freq = data;
+	struct cpumask *cpus = freq->policy->cpus;
+	unsigned long lpj;
+	int cpu;
+
+	/*
+	 * Skip lpj numbers adjustment if the CPU-freq transition is safe for
+	 * the loops delay. (Is this possible?)
+	 */
+	if (freq->flags & CPUFREQ_CONST_LOOPS)
+		return NOTIFY_OK;
+
+	/* Save the initial values of the lpjes for future scaling. */
+	if (!glb_lpj_ref) {
+		glb_lpj_ref = boot_cpu_data.udelay_val;
+		glb_lpj_ref_freq = freq->old;
+
+		for_each_online_cpu(cpu) {
+			per_cpu(pcp_lpj_ref, cpu) =
+				cpu_data[cpu].udelay_val;
+			per_cpu(pcp_lpj_ref_freq, cpu) = freq->old;
+		}
+	}
+
+	/*
+	 * Adjust global lpj variable and per-CPU udelay_val number in
+	 * accordance with the new CPU frequency.
+	 */
+	if ((val == CPUFREQ_PRECHANGE  && freq->old < freq->new) ||
+	    (val == CPUFREQ_POSTCHANGE && freq->old > freq->new)) {
+		loops_per_jiffy = cpufreq_scale(glb_lpj_ref,
+						glb_lpj_ref_freq,
+						freq->new);
+
+		for_each_cpu(cpu, cpus) {
+			lpj = cpufreq_scale(per_cpu(pcp_lpj_ref, cpu),
+					    per_cpu(pcp_lpj_ref_freq, cpu),
+					    freq->new);
+			cpu_data[cpu].udelay_val = (unsigned int)lpj;
+		}
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block cpufreq_notifier = {
+	.notifier_call  = cpufreq_callback,
+};
+
+static int __init register_cpufreq_notifier(void)
+{
+	return cpufreq_register_notifier(&cpufreq_notifier,
+					 CPUFREQ_TRANSITION_NOTIFIER);
+}
+core_initcall(register_cpufreq_notifier);
+
+#endif /* CONFIG_CPU_FREQ */
+
 /*
  * forward reference
  */
-- 
2.25.1

[PATCH 5.4 124/261] crypto: stm32/crc32 - fix ext4 chksum BUG_ON()

[Greg Kroah-Hartman]

From: Nicolas Toromanoff <nicolas.toromanoff@st.com>

[ Upstream commit 49c2c082e00e0bc4f5cbb7c21c7f0f873b35ab09 ]

Allow use of crc_update without prior call to crc_init.
And change (and fix) driver to use CRC device even on unaligned buffers.

Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module")

Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/stm32/stm32-crc32.c | 98 +++++++++++++++---------------
 1 file changed, 48 insertions(+), 50 deletions(-)

diff --git a/drivers/crypto/stm32/stm32-crc32.c b/drivers/crypto/stm32/stm32-crc32.c
index 9e11c3480353..17b371eacd57 100644
--- a/drivers/crypto/stm32/stm32-crc32.c
+++ b/drivers/crypto/stm32/stm32-crc32.c
@@ -28,8 +28,10 @@
 
 /* Registers values */
 #define CRC_CR_RESET            BIT(0)
-#define CRC_CR_REVERSE          (BIT(7) | BIT(6) | BIT(5))
 #define CRC_INIT_DEFAULT        0xFFFFFFFF
+#define CRC_CR_REV_IN_WORD      (BIT(6) | BIT(5))
+#define CRC_CR_REV_IN_BYTE      BIT(5)
+#define CRC_CR_REV_OUT          BIT(7)
 
 #define CRC_AUTOSUSPEND_DELAY	50
 
@@ -38,8 +40,6 @@ struct stm32_crc {
 	struct device    *dev;
 	void __iomem     *regs;
 	struct clk       *clk;
-	u8               pending_data[sizeof(u32)];
-	size_t           nb_pending_bytes;
 };
 
 struct stm32_crc_list {
@@ -59,7 +59,6 @@ struct stm32_crc_ctx {
 
 struct stm32_crc_desc_ctx {
 	u32    partial; /* crc32c: partial in first 4 bytes of that struct */
-	struct stm32_crc *crc;
 };
 
 static int stm32_crc32_cra_init(struct crypto_tfm *tfm)
@@ -101,25 +100,22 @@ static int stm32_crc_init(struct shash_desc *desc)
 	struct stm32_crc *crc;
 
 	spin_lock_bh(&crc_list.lock);
-	list_for_each_entry(crc, &crc_list.dev_list, list) {
-		ctx->crc = crc;
-		break;
-	}
+	crc = list_first_entry(&crc_list.dev_list, struct stm32_crc, list);
 	spin_unlock_bh(&crc_list.lock);
 
-	pm_runtime_get_sync(ctx->crc->dev);
+	pm_runtime_get_sync(crc->dev);
 
 	/* Reset, set key, poly and configure in bit reverse mode */
-	writel_relaxed(bitrev32(mctx->key), ctx->crc->regs + CRC_INIT);
-	writel_relaxed(bitrev32(mctx->poly), ctx->crc->regs + CRC_POL);
-	writel_relaxed(CRC_CR_RESET | CRC_CR_REVERSE, ctx->crc->regs + CRC_CR);
+	writel_relaxed(bitrev32(mctx->key), crc->regs + CRC_INIT);
+	writel_relaxed(bitrev32(mctx->poly), crc->regs + CRC_POL);
+	writel_relaxed(CRC_CR_RESET | CRC_CR_REV_IN_WORD | CRC_CR_REV_OUT,
+		       crc->regs + CRC_CR);
 
 	/* Store partial result */
-	ctx->partial = readl_relaxed(ctx->crc->regs + CRC_DR);
-	ctx->crc->nb_pending_bytes = 0;
+	ctx->partial = readl_relaxed(crc->regs + CRC_DR);
 
-	pm_runtime_mark_last_busy(ctx->crc->dev);
-	pm_runtime_put_autosuspend(ctx->crc->dev);
+	pm_runtime_mark_last_busy(crc->dev);
+	pm_runtime_put_autosuspend(crc->dev);
 
 	return 0;
 }
@@ -128,31 +124,49 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8,
 			    unsigned int length)
 {
 	struct stm32_crc_desc_ctx *ctx = shash_desc_ctx(desc);
-	struct stm32_crc *crc = ctx->crc;
-	u32 *d32;
-	unsigned int i;
+	struct stm32_crc_ctx *mctx = crypto_shash_ctx(desc->tfm);
+	struct stm32_crc *crc;
+
+	spin_lock_bh(&crc_list.lock);
+	crc = list_first_entry(&crc_list.dev_list, struct stm32_crc, list);
+	spin_unlock_bh(&crc_list.lock);
 
 	pm_runtime_get_sync(crc->dev);
 
-	if (unlikely(crc->nb_pending_bytes)) {
-		while (crc->nb_pending_bytes != sizeof(u32) && length) {
-			/* Fill in pending data */
-			crc->pending_data[crc->nb_pending_bytes++] = *(d8++);
+	/*
+	 * Restore previously calculated CRC for this context as init value
+	 * Restore polynomial configuration
+	 * Configure in register for word input data,
+	 * Configure out register in reversed bit mode data.
+	 */
+	writel_relaxed(bitrev32(ctx->partial), crc->regs + CRC_INIT);
+	writel_relaxed(bitrev32(mctx->poly), crc->regs + CRC_POL);
+	writel_relaxed(CRC_CR_RESET | CRC_CR_REV_IN_WORD | CRC_CR_REV_OUT,
+		       crc->regs + CRC_CR);
+
+	if (d8 != PTR_ALIGN(d8, sizeof(u32))) {
+		/* Configure for byte data */
+		writel_relaxed(CRC_CR_REV_IN_BYTE | CRC_CR_REV_OUT,
+			       crc->regs + CRC_CR);
+		while (d8 != PTR_ALIGN(d8, sizeof(u32)) && length) {
+			writeb_relaxed(*d8++, crc->regs + CRC_DR);
 			length--;
 		}
-
-		if (crc->nb_pending_bytes == sizeof(u32)) {
-			/* Process completed pending data */
-			writel_relaxed(*(u32 *)crc->pending_data,
-				       crc->regs + CRC_DR);
-			crc->nb_pending_bytes = 0;
-		}
+		/* Configure for word data */
+		writel_relaxed(CRC_CR_REV_IN_WORD | CRC_CR_REV_OUT,
+			       crc->regs + CRC_CR);
 	}
 
-	d32 = (u32 *)d8;
-	for (i = 0; i < length >> 2; i++)
-		/* Process 32 bits data */
-		writel_relaxed(*(d32++), crc->regs + CRC_DR);
+	for (; length >= sizeof(u32); d8 += sizeof(u32), length -= sizeof(u32))
+		writel_relaxed(*((u32 *)d8), crc->regs + CRC_DR);
+
+	if (length) {
+		/* Configure for byte data */
+		writel_relaxed(CRC_CR_REV_IN_BYTE | CRC_CR_REV_OUT,
+			       crc->regs + CRC_CR);
+		while (length--)
+			writeb_relaxed(*d8++, crc->regs + CRC_DR);
+	}
 
 	/* Store partial result */
 	ctx->partial = readl_relaxed(crc->regs + CRC_DR);
@@ -160,22 +174,6 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8,
 	pm_runtime_mark_last_busy(crc->dev);
 	pm_runtime_put_autosuspend(crc->dev);
 
-	/* Check for pending data (non 32 bits) */
-	length &= 3;
-	if (likely(!length))
-		return 0;
-
-	if ((crc->nb_pending_bytes + length) >= sizeof(u32)) {
-		/* Shall not happen */
-		dev_err(crc->dev, "Pending data overflow\n");
-		return -EINVAL;
-	}
-
-	d8 = (const u8 *)d32;
-	for (i = 0; i < length; i++)
-		/* Store pending data */
-		crc->pending_data[crc->nb_pending_bytes++] = *(d8++);
-
 	return 0;
 }
 
-- 
2.25.1

[PATCH 5.4 125/261] crypto: stm32/crc32 - fix run-time self test issue.

[Greg Kroah-Hartman]

From: Nicolas Toromanoff <nicolas.toromanoff@st.com>

[ Upstream commit a8cc3128bf2c01c4d448fe17149e87132113b445 ]

Fix wrong crc32 initialisation value:
"alg: shash: stm32_crc32 test failed (wrong result) on test vector 0,
cfg="init+update+final aligned buffer"
cra_name="crc32c" expects an init value of 0XFFFFFFFF,
cra_name="crc32" expects an init value of 0.

Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module")

Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/stm32/stm32-crc32.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/crypto/stm32/stm32-crc32.c b/drivers/crypto/stm32/stm32-crc32.c
index 17b371eacd57..93969d23a4a8 100644
--- a/drivers/crypto/stm32/stm32-crc32.c
+++ b/drivers/crypto/stm32/stm32-crc32.c
@@ -28,10 +28,10 @@
 
 /* Registers values */
 #define CRC_CR_RESET            BIT(0)
-#define CRC_INIT_DEFAULT        0xFFFFFFFF
 #define CRC_CR_REV_IN_WORD      (BIT(6) | BIT(5))
 #define CRC_CR_REV_IN_BYTE      BIT(5)
 #define CRC_CR_REV_OUT          BIT(7)
+#define CRC32C_INIT_DEFAULT     0xFFFFFFFF
 
 #define CRC_AUTOSUSPEND_DELAY	50
 
@@ -65,7 +65,7 @@ static int stm32_crc32_cra_init(struct crypto_tfm *tfm)
 {
 	struct stm32_crc_ctx *mctx = crypto_tfm_ctx(tfm);
 
-	mctx->key = CRC_INIT_DEFAULT;
+	mctx->key = 0;
 	mctx->poly = CRC32_POLY_LE;
 	return 0;
 }
@@ -74,7 +74,7 @@ static int stm32_crc32c_cra_init(struct crypto_tfm *tfm)
 {
 	struct stm32_crc_ctx *mctx = crypto_tfm_ctx(tfm);
 
-	mctx->key = CRC_INIT_DEFAULT;
+	mctx->key = CRC32C_INIT_DEFAULT;
 	mctx->poly = CRC32C_POLY_LE;
 	return 0;
 }
-- 
2.25.1

[PATCH 5.4 126/261] crypto: stm32/crc32 - fix multi-instance

[Greg Kroah-Hartman]

From: Nicolas Toromanoff <nicolas.toromanoff@st.com>

[ Upstream commit 10b89c43a64eb0d236903b79a3bc9d8f6cbfd9c7 ]

Ensure CRC algorithm is registered only once in crypto framework when
there are several instances of CRC devices.

Update the CRC device list management to avoid that only the first CRC
instance is used.

Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module")

Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/stm32/stm32-crc32.c | 48 ++++++++++++++++++++++--------
 1 file changed, 36 insertions(+), 12 deletions(-)

diff --git a/drivers/crypto/stm32/stm32-crc32.c b/drivers/crypto/stm32/stm32-crc32.c
index 93969d23a4a8..e68b856d03b6 100644
--- a/drivers/crypto/stm32/stm32-crc32.c
+++ b/drivers/crypto/stm32/stm32-crc32.c
@@ -93,16 +93,29 @@ static int stm32_crc_setkey(struct crypto_shash *tfm, const u8 *key,
 	return 0;
 }
 
-static int stm32_crc_init(struct shash_desc *desc)
+static struct stm32_crc *stm32_crc_get_next_crc(void)
 {
-	struct stm32_crc_desc_ctx *ctx = shash_desc_ctx(desc);
-	struct stm32_crc_ctx *mctx = crypto_shash_ctx(desc->tfm);
 	struct stm32_crc *crc;
 
 	spin_lock_bh(&crc_list.lock);
 	crc = list_first_entry(&crc_list.dev_list, struct stm32_crc, list);
+	if (crc)
+		list_move_tail(&crc->list, &crc_list.dev_list);
 	spin_unlock_bh(&crc_list.lock);
 
+	return crc;
+}
+
+static int stm32_crc_init(struct shash_desc *desc)
+{
+	struct stm32_crc_desc_ctx *ctx = shash_desc_ctx(desc);
+	struct stm32_crc_ctx *mctx = crypto_shash_ctx(desc->tfm);
+	struct stm32_crc *crc;
+
+	crc = stm32_crc_get_next_crc();
+	if (!crc)
+		return -ENODEV;
+
 	pm_runtime_get_sync(crc->dev);
 
 	/* Reset, set key, poly and configure in bit reverse mode */
@@ -127,9 +140,9 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8,
 	struct stm32_crc_ctx *mctx = crypto_shash_ctx(desc->tfm);
 	struct stm32_crc *crc;
 
-	spin_lock_bh(&crc_list.lock);
-	crc = list_first_entry(&crc_list.dev_list, struct stm32_crc, list);
-	spin_unlock_bh(&crc_list.lock);
+	crc = stm32_crc_get_next_crc();
+	if (!crc)
+		return -ENODEV;
 
 	pm_runtime_get_sync(crc->dev);
 
@@ -202,6 +215,8 @@ static int stm32_crc_digest(struct shash_desc *desc, const u8 *data,
 	return stm32_crc_init(desc) ?: stm32_crc_finup(desc, data, length, out);
 }
 
+static unsigned int refcnt;
+static DEFINE_MUTEX(refcnt_lock);
 static struct shash_alg algs[] = {
 	/* CRC-32 */
 	{
@@ -292,12 +307,18 @@ static int stm32_crc_probe(struct platform_device *pdev)
 	list_add(&crc->list, &crc_list.dev_list);
 	spin_unlock(&crc_list.lock);
 
-	ret = crypto_register_shashes(algs, ARRAY_SIZE(algs));
-	if (ret) {
-		dev_err(dev, "Failed to register\n");
-		clk_disable_unprepare(crc->clk);
-		return ret;
+	mutex_lock(&refcnt_lock);
+	if (!refcnt) {
+		ret = crypto_register_shashes(algs, ARRAY_SIZE(algs));
+		if (ret) {
+			mutex_unlock(&refcnt_lock);
+			dev_err(dev, "Failed to register\n");
+			clk_disable_unprepare(crc->clk);
+			return ret;
+		}
 	}
+	refcnt++;
+	mutex_unlock(&refcnt_lock);
 
 	dev_info(dev, "Initialized\n");
 
@@ -318,7 +339,10 @@ static int stm32_crc_remove(struct platform_device *pdev)
 	list_del(&crc->list);
 	spin_unlock(&crc_list.lock);
 
-	crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
+	mutex_lock(&refcnt_lock);
+	if (!--refcnt)
+		crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
+	mutex_unlock(&refcnt_lock);
 
 	pm_runtime_disable(crc->dev);
 	pm_runtime_put_noidle(crc->dev);
-- 
2.25.1

[PATCH 5.4 127/261] drm/amd/powerpay: Disable gfxoff when setting manual mode on picasso and raven

[Greg Kroah-Hartman]

From: chen gong <curry.gong@amd.com>

[ Upstream commit cbd2d08c7463e78d625a69e9db27ad3004cbbd99 ]

[Problem description]
1. Boot up picasso platform, launches desktop, Don't do anything (APU enter into "gfxoff" state)
2. Remote login to platform using SSH, then type the command line:
	sudo su -c "echo manual > /sys/class/drm/card0/device/power_dpm_force_performance_level"
	sudo su -c "echo 2 > /sys/class/drm/card0/device/pp_dpm_sclk" (fix SCLK to 1400MHz)
3. Move the mouse around in Window
4. Phenomenon :  The screen frozen

Tester will switch sclk level during glmark2 run time.
APU will enter "gfxoff" state intermittently during glmark2 run time.
The system got hanged if fix GFXCLK to 1400MHz when APU is in "gfxoff"
state.

[Debug]
1. Fix SCLK to X MHz
	1400: screen frozen, screen black, then OS will reboot.
	1300: screen frozen.
	1200: screen frozen, screen black.
	1100: screen frozen, screen black, then OS will reboot.
	1000: screen frozen, screen black.
	900:  screen frozen, screen black, then OS will reboot.
	800:  Situation Nomal, issue disappear.
	700:  Situation Nomal, issue disappear.
2. SBIOS setting: AMD CBS --> SMU Debug Options -->SMU Debug --> "GFX DLDO Psm Margin Control":
	50 : Situation Nomal, issue disappear.
	45 : Situation Nomal, issue disappear.
	40 : Situation Nomal, issue disappear.
	35 : Situation Nomal, issue disappear.
	30 : screen black.
	25 : screen frozen, then blurred screen.
	20 : screen frozen.
	15 : screen black.
	10 : screen frozen.
	5  : screen frozen, then blurred screen.
3. Disable GFXOFF feature
	Situation Nomal, issue disappear.

[Why]
Through a period of time debugging with Sys Eng team and SMU team, Sys
Eng team said this is voltage/frequency marginal issue not a F/W or H/W
bug. This experiment proves that default targetPsm [for f=1400MHz] is
not sufficient when GFXOFF is enabled on Picasso.

SMU team think it is an odd test conditions to force sclk="1400MHz" when
GPU is in "gfxoff" state，then wake up the GFX. SCLK should be in the
"lowest frequency" when gfxoff.

[How]
Disable gfxoff when setting manual mode.
Enable gfxoff when setting other mode(exiting manual mode) again.

By the way, from the user point of view, now that user switch to manual
mode and force SCLK Frequency, he don't want SCLK be controlled by
workload.It becomes meaningless to "switch to manual mode" if APU enter "gfxoff"
due to lack of workload at this point.

Tips: Same issue observed on Raven.

Signed-off-by: chen gong <curry.gong@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
index c8008b956363..d1d2372ab7ca 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
@@ -370,6 +370,15 @@ static ssize_t amdgpu_set_dpm_forced_performance_level(struct device *dev,
 	if (current_level == level)
 		return count;
 
+	if (adev->asic_type == CHIP_RAVEN) {
+		if (adev->rev_id < 8) {
+			if (current_level != AMD_DPM_FORCED_LEVEL_MANUAL && level == AMD_DPM_FORCED_LEVEL_MANUAL)
+				amdgpu_gfx_off_ctrl(adev, false);
+			else if (current_level == AMD_DPM_FORCED_LEVEL_MANUAL && level != AMD_DPM_FORCED_LEVEL_MANUAL)
+				amdgpu_gfx_off_ctrl(adev, true);
+		}
+	}
+
 	/* profile_exit setting is valid only when current mode is in profile mode */
 	if (!(current_level & (AMD_DPM_FORCED_LEVEL_PROFILE_STANDARD |
 	    AMD_DPM_FORCED_LEVEL_PROFILE_MIN_SCLK |
-- 
2.25.1

[PATCH 5.4 128/261] drm/amdgpu: Sync with VM root BO when switching VM to CPU update mode

[Greg Kroah-Hartman]

From: Felix Kuehling <Felix.Kuehling@amd.com>

[ Upstream commit 90ca78deb004abe75b5024968a199acb96bb70f9 ]

This fixes an intermittent bug where a root PD clear operation still in
progress could overwrite a PDE update done by the CPU, resulting in a
VM fault.

Fixes: 108b4d928c03 ("drm/amd/amdgpu: Update VM function pointer")
Reported-by: Jay Cornwall <Jay.Cornwall@amd.com>
Tested-by: Jay Cornwall <Jay.Cornwall@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
index c7514f743409..6335bd4ae374 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
@@ -2867,10 +2867,17 @@ int amdgpu_vm_make_compute(struct amdgpu_device *adev, struct amdgpu_vm *vm, uns
 	WARN_ONCE((vm->use_cpu_for_update && !amdgpu_gmc_vram_full_visible(&adev->gmc)),
 		  "CPU update of VM recommended only for large BAR system\n");
 
-	if (vm->use_cpu_for_update)
+	if (vm->use_cpu_for_update) {
+		/* Sync with last SDMA update/clear before switching to CPU */
+		r = amdgpu_bo_sync_wait(vm->root.base.bo,
+					AMDGPU_FENCE_OWNER_UNDEFINED, true);
+		if (r)
+			goto free_idr;
+
 		vm->update_funcs = &amdgpu_vm_cpu_funcs;
-	else
+	} else {
 		vm->update_funcs = &amdgpu_vm_sdma_funcs;
+	}
 	dma_fence_put(vm->last_update);
 	vm->last_update = NULL;
 
-- 
2.25.1

[PATCH 5.4 129/261] selftests/bpf: CONFIG_IPV6_SEG6_BPF required for test_seg6_loop.o

[Greg Kroah-Hartman]

From: Alan Maguire <alan.maguire@oracle.com>

[ Upstream commit 3c8e8cf4b18b3a7034fab4c4504fc4b54e4b6195 ]

test_seg6_loop.o uses the helper bpf_lwt_seg6_adjust_srh();
it will not be present if CONFIG_IPV6_SEG6_BPF is not specified.

Fixes: b061017f8b4d ("selftests/bpf: add realistic loop tests")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1590147389-26482-2-git-send-email-alan.maguire@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/config | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/testing/selftests/bpf/config b/tools/testing/selftests/bpf/config
index 5dc109f4c097..b9601f13cf03 100644
--- a/tools/testing/selftests/bpf/config
+++ b/tools/testing/selftests/bpf/config
@@ -25,6 +25,7 @@ CONFIG_XDP_SOCKETS=y
 CONFIG_FTRACE_SYSCALLS=y
 CONFIG_IPV6_TUNNEL=y
 CONFIG_IPV6_GRE=y
+CONFIG_IPV6_SEG6_BPF=y
 CONFIG_NET_FOU=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_IPV6_FOU=m
-- 
2.25.1

[PATCH 5.4 130/261] x86/mm: Stop printing BRK addresses

[Greg Kroah-Hartman]

From: Arvind Sankar <nivedita@alum.mit.edu>

[ Upstream commit 67d631b7c05eff955ccff4139327f0f92a5117e5 ]

This currently leaks kernel physical addresses into userspace.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lkml.kernel.org/r/20200229231120.1147527-1-nivedita@alum.mit.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/mm/init.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index fd10d91a6115..af352e228fa2 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -121,8 +121,6 @@ __ref void *alloc_low_pages(unsigned int num)
 	} else {
 		pfn = pgt_buf_end;
 		pgt_buf_end += num;
-		printk(KERN_DEBUG "BRK [%#010lx, %#010lx] PGTABLE\n",
-			pfn << PAGE_SHIFT, (pgt_buf_end << PAGE_SHIFT) - 1);
 	}
 
 	for (i = 0; i < num; i++) {
-- 
2.25.1

[PATCH 5.4 131/261] MIPS: tools: Fix resource leak in elf-entry.c

[Greg Kroah-Hartman]

From: Kaige Li <likaige@loongson.cn>

[ Upstream commit f33a0b941017b9cb5a4e975af198b855b2f2b455 ]

There is a file descriptor resource leak in elf-entry.c, fix this
by adding fclose() before return and die.

Signed-off-by: Kaige Li <likaige@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/tools/elf-entry.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/mips/tools/elf-entry.c b/arch/mips/tools/elf-entry.c
index adde79ce7fc0..dbd14ff05b4c 100644
--- a/arch/mips/tools/elf-entry.c
+++ b/arch/mips/tools/elf-entry.c
@@ -51,11 +51,14 @@ int main(int argc, const char *argv[])
 	nread = fread(&hdr, 1, sizeof(hdr), file);
 	if (nread != sizeof(hdr)) {
 		perror("Unable to read input file");
+		fclose(file);
 		return EXIT_FAILURE;
 	}
 
-	if (memcmp(hdr.ehdr32.e_ident, ELFMAG, SELFMAG))
+	if (memcmp(hdr.ehdr32.e_ident, ELFMAG, SELFMAG)) {
+		fclose(file);
 		die("Input is not an ELF\n");
+	}
 
 	switch (hdr.ehdr32.e_ident[EI_CLASS]) {
 	case ELFCLASS32:
@@ -67,6 +70,7 @@ int main(int argc, const char *argv[])
 			entry = be32toh(hdr.ehdr32.e_entry);
 			break;
 		default:
+			fclose(file);
 			die("Invalid ELF encoding\n");
 		}
 
@@ -83,14 +87,17 @@ int main(int argc, const char *argv[])
 			entry = be64toh(hdr.ehdr64.e_entry);
 			break;
 		default:
+			fclose(file);
 			die("Invalid ELF encoding\n");
 		}
 		break;
 
 	default:
+		fclose(file);
 		die("Invalid ELF class\n");
 	}
 
 	printf("0x%016" PRIx64 "\n", entry);
+	fclose(file);
 	return EXIT_SUCCESS;
 }
-- 
2.25.1

[PATCH 5.4 132/261] m68k: mac: Dont call via_flush_cache() on Mac IIfx

[Greg Kroah-Hartman]

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit bcc44f6b74106b31f0b0408b70305a40360d63b7 ]

There is no VIA2 chip on the Mac IIfx, so don't call via_flush_cache().
This avoids a boot crash which appeared in v5.4.

printk: console [ttyS0] enabled
printk: bootconsole [debug0] disabled
printk: bootconsole [debug0] disabled
Calibrating delay loop... 9.61 BogoMIPS (lpj=48064)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
devtmpfs: initialized
random: get_random_u32 called from bucket_table_alloc.isra.27+0x68/0x194 with crng_init=0
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes, linear)
NET: Registered protocol family 16
Data read fault at 0x00000000 in Super Data (pc=0x8a6a)
BAD KERNEL BUSERR
Oops: 00000000
Modules linked in:
PC: [<00008a6a>] via_flush_cache+0x12/0x2c
SR: 2700  SP: 01c1fe3c  a2: 01c24000
d0: 00001119    d1: 0000000c    d2: 00012000    d3: 0000000f
d4: 01c06840    d5: 00033b92    a0: 00000000    a1: 00000000
Process swapper (pid: 1, task=01c24000)
Frame format=B ssw=0755 isc=0200 isb=fff7 daddr=00000000 dobuf=01c1fed0
baddr=00008a6e dibuf=0000004e ver=f
Stack from 01c1fec4:
        01c1fed0 00007d7e 00010080 01c1fedc 0000792e 00000001 01c1fef4 00006b40
        01c80000 00040000 00000006 00000003 01c1ff1c 004a545e 004ff200 00040000
        00000000 00000003 01c06840 00033b92 004a5410 004b6c88 01c1ff84 000021e2
        00000073 00000003 01c06840 00033b92 0038507a 004bb094 004b6ca8 004b6c88
        004b6ca4 004b6c88 000021ae 00020002 00000000 01c0685d 00000000 01c1ffb4
        0049f938 00409c85 01c06840 0045bd40 00000073 00000002 00000002 00000000
Call Trace: [<00007d7e>] mac_cache_card_flush+0x12/0x1c
 [<00010080>] fix_dnrm+0x2/0x18
 [<0000792e>] cache_push+0x46/0x5a
 [<00006b40>] arch_dma_prep_coherent+0x60/0x6e
 [<00040000>] switched_to_dl+0x76/0xd0
 [<004a545e>] dma_atomic_pool_init+0x4e/0x188
 [<00040000>] switched_to_dl+0x76/0xd0
 [<00033b92>] parse_args+0x0/0x370
 [<004a5410>] dma_atomic_pool_init+0x0/0x188
 [<000021e2>] do_one_initcall+0x34/0x1be
 [<00033b92>] parse_args+0x0/0x370
 [<0038507a>] strcpy+0x0/0x1e
 [<000021ae>] do_one_initcall+0x0/0x1be
 [<00020002>] do_proc_dointvec_conv+0x54/0x74
 [<0049f938>] kernel_init_freeable+0x126/0x190
 [<0049f94c>] kernel_init_freeable+0x13a/0x190
 [<004a5410>] dma_atomic_pool_init+0x0/0x188
 [<00041798>] complete+0x0/0x3c
 [<000b9b0c>] kfree+0x0/0x20a
 [<0038df98>] schedule+0x0/0xd0
 [<0038d604>] kernel_init+0x0/0xda
 [<0038d610>] kernel_init+0xc/0xda
 [<0038d604>] kernel_init+0x0/0xda
 [<00002d38>] ret_from_kernel_thread+0xc/0x14
Code: 0000 2079 0048 10da 2279 0048 10c8 d3c8 <1011> 0200 fff7 1280 d1f9 0048 10c8 1010 0000 0008 1080 4e5e 4e75 4e56 0000 2039
Disabling lock debugging due to kernel taint
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

Thanks to Stan Johnson for capturing the console log and running git
bisect.

Git bisect said commit 8e3a68fb55e0 ("dma-mapping: make
dma_atomic_pool_init self-contained") is the first "bad" commit. I don't
know why. Perhaps mach_l2_flush first became reachable with that commit.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Cc: Joshua Thompson <funaho@jurai.org>
Link: https://lore.kernel.org/r/b8bbeef197d6b3898e82ed0d231ad08f575a4b34.1589949122.git.fthain@telegraphics.com.au
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/m68k/include/asm/mac_via.h |  1 +
 arch/m68k/mac/config.c          | 21 ++-------------------
 arch/m68k/mac/via.c             |  6 +++++-
 3 files changed, 8 insertions(+), 20 deletions(-)

diff --git a/arch/m68k/include/asm/mac_via.h b/arch/m68k/include/asm/mac_via.h
index de1470c4d829..1149251ea58d 100644
--- a/arch/m68k/include/asm/mac_via.h
+++ b/arch/m68k/include/asm/mac_via.h
@@ -257,6 +257,7 @@ extern int rbv_present,via_alt_mapping;
 
 struct irq_desc;
 
+extern void via_l2_flush(int writeback);
 extern void via_register_interrupts(void);
 extern void via_irq_enable(int);
 extern void via_irq_disable(int);
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index 611f73bfc87c..d0126ab01360 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -59,7 +59,6 @@ extern void iop_preinit(void);
 extern void iop_init(void);
 extern void via_init(void);
 extern void via_init_clock(irq_handler_t func);
-extern void via_flush_cache(void);
 extern void oss_init(void);
 extern void psc_init(void);
 extern void baboon_init(void);
@@ -130,21 +129,6 @@ int __init mac_parse_bootinfo(const struct bi_record *record)
 	return unknown;
 }
 
-/*
- * Flip into 24bit mode for an instant - flushes the L2 cache card. We
- * have to disable interrupts for this. Our IRQ handlers will crap
- * themselves if they take an IRQ in 24bit mode!
- */
-
-static void mac_cache_card_flush(int writeback)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	via_flush_cache();
-	local_irq_restore(flags);
-}
-
 void __init config_mac(void)
 {
 	if (!MACH_IS_MAC)
@@ -175,9 +159,8 @@ void __init config_mac(void)
 	 * not.
 	 */
 
-	if (macintosh_config->ident == MAC_MODEL_IICI
-	    || macintosh_config->ident == MAC_MODEL_IIFX)
-		mach_l2_flush = mac_cache_card_flush;
+	if (macintosh_config->ident == MAC_MODEL_IICI)
+		mach_l2_flush = via_l2_flush;
 }
 
 
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index 3c2cfcb74982..1f0fad2a98a0 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -294,10 +294,14 @@ void via_debug_dump(void)
  * the system into 24-bit mode for an instant.
  */
 
-void via_flush_cache(void)
+void via_l2_flush(int writeback)
 {
+	unsigned long flags;
+
+	local_irq_save(flags);
 	via2[gBufB] &= ~VIA2B_vMode32;
 	via2[gBufB] |= VIA2B_vMode32;
+	local_irq_restore(flags);
 }
 
 /*
-- 
2.25.1

[PATCH 5.4 133/261] btrfs: improve global reserve stealing logic

[Greg Kroah-Hartman]

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit 7f9fe614407692f670601a634621138233ac00d7 ]

For unlink transactions and block group removal
btrfs_start_transaction_fallback_global_rsv will first try to start an
ordinary transaction and if it fails it will fall back to reserving the
required amount by stealing from the global reserve. This is problematic
because of all the same reasons we had with previous iterations of the
ENOSPC handling, thundering herd.  We get a bunch of failures all at
once, everybody tries to allocate from the global reserve, some win and
some lose, we get an ENSOPC.

Fix this behavior by introducing BTRFS_RESERVE_FLUSH_ALL_STEAL. It's
used to mark unlink reservation. To fix this we need to integrate this
logic into the normal ENOSPC infrastructure.  We still go through all of
the normal flushing work, and at the moment we begin to fail all the
tickets we try to satisfy any tickets that are allowed to steal by
stealing from the global reserve.  If this works we start the flushing
system over again just like we would with a normal ticket satisfaction.
This serializes our global reserve stealing, so we don't have the
thundering herd problem.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/block-group.c |  2 +-
 fs/btrfs/ctree.h       |  1 +
 fs/btrfs/inode.c       |  2 +-
 fs/btrfs/space-info.c  | 37 ++++++++++++++++++++++++++++++++++++-
 fs/btrfs/space-info.h  |  1 +
 fs/btrfs/transaction.c | 42 +++++-------------------------------------
 fs/btrfs/transaction.h |  3 +--
 7 files changed, 46 insertions(+), 42 deletions(-)

diff --git a/fs/btrfs/block-group.c b/fs/btrfs/block-group.c
index 2fead6c3c687..c2dd94e1b274 100644
--- a/fs/btrfs/block-group.c
+++ b/fs/btrfs/block-group.c
@@ -1167,7 +1167,7 @@ struct btrfs_trans_handle *btrfs_start_trans_remove_block_group(
 	free_extent_map(em);
 
 	return btrfs_start_transaction_fallback_global_rsv(fs_info->extent_root,
-							   num_items, 1);
+							   num_items);
 }
 
 /*
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 169075550a5a..6d2c277c6e0a 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -2465,6 +2465,7 @@ enum btrfs_reserve_flush_enum {
 	BTRFS_RESERVE_FLUSH_LIMIT,
 	BTRFS_RESERVE_FLUSH_EVICT,
 	BTRFS_RESERVE_FLUSH_ALL,
+	BTRFS_RESERVE_FLUSH_ALL_STEAL,
 };
 
 enum btrfs_flush_state {
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 94b0df3fb3c8..d2e7ddb95f6c 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -4250,7 +4250,7 @@ static struct btrfs_trans_handle *__unlink_start_trans(struct inode *dir)
 	 * 1 for the inode ref
 	 * 1 for the inode
 	 */
-	return btrfs_start_transaction_fallback_global_rsv(root, 5, 5);
+	return btrfs_start_transaction_fallback_global_rsv(root, 5);
 }
 
 static int btrfs_unlink(struct inode *dir, struct dentry *dentry)
diff --git a/fs/btrfs/space-info.c b/fs/btrfs/space-info.c
index 5b47e3c44c8f..7889a59a57fa 100644
--- a/fs/btrfs/space-info.c
+++ b/fs/btrfs/space-info.c
@@ -689,6 +689,34 @@ static inline int need_do_async_reclaim(struct btrfs_fs_info *fs_info,
 		!test_bit(BTRFS_FS_STATE_REMOUNTING, &fs_info->fs_state));
 }
 
+static bool steal_from_global_rsv(struct btrfs_fs_info *fs_info,
+				  struct btrfs_space_info *space_info,
+				  struct reserve_ticket *ticket)
+{
+	struct btrfs_block_rsv *global_rsv = &fs_info->global_block_rsv;
+	u64 min_bytes;
+
+	if (global_rsv->space_info != space_info)
+		return false;
+
+	spin_lock(&global_rsv->lock);
+	min_bytes = div_factor(global_rsv->size, 5);
+	if (global_rsv->reserved < min_bytes + ticket->bytes) {
+		spin_unlock(&global_rsv->lock);
+		return false;
+	}
+	global_rsv->reserved -= ticket->bytes;
+	ticket->bytes = 0;
+	list_del_init(&ticket->list);
+	wake_up(&ticket->wait);
+	space_info->tickets_id++;
+	if (global_rsv->reserved < global_rsv->size)
+		global_rsv->full = 0;
+	spin_unlock(&global_rsv->lock);
+
+	return true;
+}
+
 /*
  * maybe_fail_all_tickets - we've exhausted our flushing, start failing tickets
  * @fs_info - fs_info for this fs
@@ -721,6 +749,10 @@ static bool maybe_fail_all_tickets(struct btrfs_fs_info *fs_info,
 		ticket = list_first_entry(&space_info->tickets,
 					  struct reserve_ticket, list);
 
+		if (ticket->steal &&
+		    steal_from_global_rsv(fs_info, space_info, ticket))
+			return true;
+
 		/*
 		 * may_commit_transaction will avoid committing the transaction
 		 * if it doesn't feel like the space reclaimed by the commit
@@ -940,6 +972,7 @@ static int handle_reserve_ticket(struct btrfs_fs_info *fs_info,
 
 	switch (flush) {
 	case BTRFS_RESERVE_FLUSH_ALL:
+	case BTRFS_RESERVE_FLUSH_ALL_STEAL:
 		wait_reserve_ticket(fs_info, space_info, ticket);
 		break;
 	case BTRFS_RESERVE_FLUSH_LIMIT:
@@ -1039,7 +1072,9 @@ static int __reserve_metadata_bytes(struct btrfs_fs_info *fs_info,
 		ticket.bytes = orig_bytes;
 		ticket.error = 0;
 		init_waitqueue_head(&ticket.wait);
-		if (flush == BTRFS_RESERVE_FLUSH_ALL) {
+		ticket.steal = (flush == BTRFS_RESERVE_FLUSH_ALL_STEAL);
+		if (flush == BTRFS_RESERVE_FLUSH_ALL ||
+		    flush == BTRFS_RESERVE_FLUSH_ALL_STEAL) {
 			list_add_tail(&ticket.list, &space_info->tickets);
 			if (!space_info->flush) {
 				space_info->flush = 1;
diff --git a/fs/btrfs/space-info.h b/fs/btrfs/space-info.h
index 8867e84aa33d..8b9a1d8fefcb 100644
--- a/fs/btrfs/space-info.h
+++ b/fs/btrfs/space-info.h
@@ -72,6 +72,7 @@ struct btrfs_space_info {
 struct reserve_ticket {
 	u64 bytes;
 	int error;
+	bool steal;
 	struct list_head list;
 	wait_queue_head_t wait;
 };
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index cdca0f656594..a94270a95bbd 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -491,7 +491,8 @@ start_transaction(struct btrfs_root *root, unsigned int num_items,
 		 * refill that amount for whatever is missing in the reserve.
 		 */
 		num_bytes = btrfs_calc_insert_metadata_size(fs_info, num_items);
-		if (delayed_refs_rsv->full == 0) {
+		if (flush == BTRFS_RESERVE_FLUSH_ALL &&
+		    delayed_refs_rsv->full == 0) {
 			delayed_refs_bytes = num_bytes;
 			num_bytes <<= 1;
 		}
@@ -627,43 +628,10 @@ struct btrfs_trans_handle *btrfs_start_transaction(struct btrfs_root *root,
 
 struct btrfs_trans_handle *btrfs_start_transaction_fallback_global_rsv(
 					struct btrfs_root *root,
-					unsigned int num_items,
-					int min_factor)
+					unsigned int num_items)
 {
-	struct btrfs_fs_info *fs_info = root->fs_info;
-	struct btrfs_trans_handle *trans;
-	u64 num_bytes;
-	int ret;
-
-	/*
-	 * We have two callers: unlink and block group removal.  The
-	 * former should succeed even if we will temporarily exceed
-	 * quota and the latter operates on the extent root so
-	 * qgroup enforcement is ignored anyway.
-	 */
-	trans = start_transaction(root, num_items, TRANS_START,
-				  BTRFS_RESERVE_FLUSH_ALL, false);
-	if (!IS_ERR(trans) || PTR_ERR(trans) != -ENOSPC)
-		return trans;
-
-	trans = btrfs_start_transaction(root, 0);
-	if (IS_ERR(trans))
-		return trans;
-
-	num_bytes = btrfs_calc_insert_metadata_size(fs_info, num_items);
-	ret = btrfs_cond_migrate_bytes(fs_info, &fs_info->trans_block_rsv,
-				       num_bytes, min_factor);
-	if (ret) {
-		btrfs_end_transaction(trans);
-		return ERR_PTR(ret);
-	}
-
-	trans->block_rsv = &fs_info->trans_block_rsv;
-	trans->bytes_reserved = num_bytes;
-	trace_btrfs_space_reservation(fs_info, "transaction",
-				      trans->transid, num_bytes, 1);
-
-	return trans;
+	return start_transaction(root, num_items, TRANS_START,
+				 BTRFS_RESERVE_FLUSH_ALL_STEAL, false);
 }
 
 struct btrfs_trans_handle *btrfs_join_transaction(struct btrfs_root *root)
diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h
index 2c5a6f6e5bb0..b15c31d23148 100644
--- a/fs/btrfs/transaction.h
+++ b/fs/btrfs/transaction.h
@@ -181,8 +181,7 @@ struct btrfs_trans_handle *btrfs_start_transaction(struct btrfs_root *root,
 						   unsigned int num_items);
 struct btrfs_trans_handle *btrfs_start_transaction_fallback_global_rsv(
 					struct btrfs_root *root,
-					unsigned int num_items,
-					int min_factor);
+					unsigned int num_items);
 struct btrfs_trans_handle *btrfs_join_transaction(struct btrfs_root *root);
 struct btrfs_trans_handle *btrfs_join_transaction_nolock(struct btrfs_root *root);
 struct btrfs_trans_handle *btrfs_join_transaction_nostart(struct btrfs_root *root);
-- 
2.25.1

[PATCH 5.4 134/261] btrfs: qgroup: mark qgroup inconsistent if were inherting snapshot to a new qgroup

[Greg Kroah-Hartman]

From: Qu Wenruo <wqu@suse.com>

[ Upstream commit cbab8ade585a18c4334b085564d9d046e01a3f70 ]

[BUG]
For the following operation, qgroup is guaranteed to be screwed up due
to snapshot adding to a new qgroup:

  # mkfs.btrfs -f $dev
  # mount $dev $mnt
  # btrfs qgroup en $mnt
  # btrfs subv create $mnt/src
  # xfs_io -f -c "pwrite 0 1m" $mnt/src/file
  # sync
  # btrfs qgroup create 1/0 $mnt/src
  # btrfs subv snapshot -i 1/0 $mnt/src $mnt/snapshot
  # btrfs qgroup show -prce $mnt/src
  qgroupid         rfer         excl     max_rfer     max_excl parent  child
  --------         ----         ----     --------     -------- ------  -----
  0/5          16.00KiB     16.00KiB         none         none ---     ---
  0/257         1.02MiB     16.00KiB         none         none ---     ---
  0/258         1.02MiB     16.00KiB         none         none 1/0     ---
  1/0             0.00B        0.00B         none         none ---     0/258
	        ^^^^^^^^^^^^^^^^^^^^

[CAUSE]
The problem is in btrfs_qgroup_inherit(), we don't have good enough
check to determine if the new relation would break the existing
accounting.

Unlike btrfs_add_qgroup_relation(), which has proper check to determine
if we can do quick update without a rescan, in btrfs_qgroup_inherit() we
can even assign a snapshot to multiple qgroups.

[FIX]
Fix it by manually marking qgroup inconsistent for snapshot inheritance.

For subvolume creation, since all its extents are exclusively owned, we
don't need to rescan.

In theory, we should call relation check like quick_update_accounting()
when doing qgroup inheritance and inform user about qgroup accounting
inconsistency.

But we don't have good mechanism to relay that back to the user in the
snapshot creation context, thus we can only silently mark the qgroup
inconsistent.

Anyway, user shouldn't use qgroup inheritance during snapshot creation,
and should add qgroup relationship after snapshot creation by 'btrfs
qgroup assign', which has a much better UI to inform user about qgroup
inconsistent and kick in rescan automatically.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/qgroup.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c
index 590defdf8860..b94f6f99e90d 100644
--- a/fs/btrfs/qgroup.c
+++ b/fs/btrfs/qgroup.c
@@ -2636,6 +2636,7 @@ int btrfs_qgroup_inherit(struct btrfs_trans_handle *trans, u64 srcid,
 	struct btrfs_root *quota_root;
 	struct btrfs_qgroup *srcgroup;
 	struct btrfs_qgroup *dstgroup;
+	bool need_rescan = false;
 	u32 level_size = 0;
 	u64 nums;
 
@@ -2779,6 +2780,13 @@ int btrfs_qgroup_inherit(struct btrfs_trans_handle *trans, u64 srcid,
 				goto unlock;
 		}
 		++i_qgroups;
+
+		/*
+		 * If we're doing a snapshot, and adding the snapshot to a new
+		 * qgroup, the numbers are guaranteed to be incorrect.
+		 */
+		if (srcid)
+			need_rescan = true;
 	}
 
 	for (i = 0; i <  inherit->num_ref_copies; ++i, i_qgroups += 2) {
@@ -2798,6 +2806,9 @@ int btrfs_qgroup_inherit(struct btrfs_trans_handle *trans, u64 srcid,
 
 		dst->rfer = src->rfer - level_size;
 		dst->rfer_cmpr = src->rfer_cmpr - level_size;
+
+		/* Manually tweaking numbers certainly needs a rescan */
+		need_rescan = true;
 	}
 	for (i = 0; i <  inherit->num_excl_copies; ++i, i_qgroups += 2) {
 		struct btrfs_qgroup *src;
@@ -2816,6 +2827,7 @@ int btrfs_qgroup_inherit(struct btrfs_trans_handle *trans, u64 srcid,
 
 		dst->excl = src->excl + level_size;
 		dst->excl_cmpr = src->excl_cmpr + level_size;
+		need_rescan = true;
 	}
 
 unlock:
@@ -2823,6 +2835,8 @@ unlock:
 out:
 	if (!committing)
 		mutex_unlock(&fs_info->qgroup_ioctl_lock);
+	if (need_rescan)
+		fs_info->qgroup_flags |= BTRFS_QGROUP_STATUS_FLAG_INCONSISTENT;
 	return ret;
 }
 
-- 
2.25.1

[PATCH 5.4 135/261] net: ethernet: fec: move GPR register offset and bit into DT

[Greg Kroah-Hartman]

From: Fugang Duan <fugang.duan@nxp.com>

[ Upstream commit 8a448bf832af537d26aa557d183a16943dce4510 ]

The commit da722186f654 (net: fec: set GPR bit on suspend by DT
configuration) set the GPR reigster offset and bit in driver for
wake on lan feature.

But it introduces two issues here:
- one SOC has two instances, they have different bit
- different SOCs may have different offset and bit

So to support wake-on-lan feature on other i.MX platforms, it should
configure the GPR reigster offset and bit from DT.

So the patch is to improve the commit da722186f654 (net: fec: set GPR
bit on suspend by DT configuration) to support multiple ethernet
instances on i.MX series.

v2:
 * switch back to store the quirks bitmask in driver_data
v3:
 * suggested by Sascha Hauer, use a struct fec_devinfo for
   abstracting differences between different hardware variants,
   it can give more freedom to describe the differences.

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/fec_main.c | 24 +++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 39c112f1543c..f0acbfa31482 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -88,8 +88,6 @@ static void fec_enet_itr_coal_init(struct net_device *ndev);
 
 struct fec_devinfo {
 	u32 quirks;
-	u8 stop_gpr_reg;
-	u8 stop_gpr_bit;
 };
 
 static const struct fec_devinfo fec_imx25_info = {
@@ -112,8 +110,6 @@ static const struct fec_devinfo fec_imx6q_info = {
 		  FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
 		  FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR006358 |
 		  FEC_QUIRK_HAS_RACC,
-	.stop_gpr_reg = 0x34,
-	.stop_gpr_bit = 27,
 };
 
 static const struct fec_devinfo fec_mvf600_info = {
@@ -3452,19 +3448,23 @@ static int fec_enet_get_irq_cnt(struct platform_device *pdev)
 }
 
 static int fec_enet_init_stop_mode(struct fec_enet_private *fep,
-				   struct fec_devinfo *dev_info,
 				   struct device_node *np)
 {
 	struct device_node *gpr_np;
+	u32 out_val[3];
 	int ret = 0;
 
-	if (!dev_info)
-		return 0;
-
-	gpr_np = of_parse_phandle(np, "gpr", 0);
+	gpr_np = of_parse_phandle(np, "fsl,stop-mode", 0);
 	if (!gpr_np)
 		return 0;
 
+	ret = of_property_read_u32_array(np, "fsl,stop-mode", out_val,
+					 ARRAY_SIZE(out_val));
+	if (ret) {
+		dev_dbg(&fep->pdev->dev, "no stop mode property\n");
+		return ret;
+	}
+
 	fep->stop_gpr.gpr = syscon_node_to_regmap(gpr_np);
 	if (IS_ERR(fep->stop_gpr.gpr)) {
 		dev_err(&fep->pdev->dev, "could not find gpr regmap\n");
@@ -3473,8 +3473,8 @@ static int fec_enet_init_stop_mode(struct fec_enet_private *fep,
 		goto out;
 	}
 
-	fep->stop_gpr.reg = dev_info->stop_gpr_reg;
-	fep->stop_gpr.bit = dev_info->stop_gpr_bit;
+	fep->stop_gpr.reg = out_val[1];
+	fep->stop_gpr.bit = out_val[2];
 
 out:
 	of_node_put(gpr_np);
@@ -3550,7 +3550,7 @@ fec_probe(struct platform_device *pdev)
 	if (of_get_property(np, "fsl,magic-packet", NULL))
 		fep->wol_flag |= FEC_WOL_HAS_MAGIC_PACKET;
 
-	ret = fec_enet_init_stop_mode(fep, dev_info, np);
+	ret = fec_enet_init_stop_mode(fep, np);
 	if (ret)
 		goto failed_stop_mode;
 
-- 
2.25.1

[PATCH 5.4 136/261] macvlan: Skip loopback packets in RX handler

[Greg Kroah-Hartman]

From: Alexander Sverdlin <alexander.sverdlin@nokia.com>

[ Upstream commit 81f3dc9349ce0bf7b8447f147f45e70f0a5b36a6 ]

Ignore loopback-originatig packets soon enough and don't try to process L2
header where it doesn't exist. The very similar br_handle_frame() in bridge
code performs exactly the same check.

This is an example of such ICMPv6 packet:

skb len=96 headroom=40 headlen=96 tailroom=56
mac=(40,0) net=(40,40) trans=80
shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0))
csum(0xae2e9a2f ip_summed=1 complete_sw=0 valid=0 level=0)
hash(0xc97ebd88 sw=1 l4=1) proto=0x86dd pkttype=5 iif=24
dev name=etha01.212 feat=0x0x0000000040005000
skb headroom: 00000000: 00 7c 86 52 84 88 ff ff 00 00 00 00 00 00 08 00
skb headroom: 00000010: 45 00 00 9e 5d 5c 40 00 40 11 33 33 00 00 00 01
skb headroom: 00000020: 02 40 43 80 00 00 86 dd
skb linear:   00000000: 60 09 88 bd 00 38 3a ff fe 80 00 00 00 00 00 00
skb linear:   00000010: 00 40 43 ff fe 80 00 00 ff 02 00 00 00 00 00 00
skb linear:   00000020: 00 00 00 00 00 00 00 01 86 00 61 00 40 00 00 2d
skb linear:   00000030: 00 00 00 00 00 00 00 00 03 04 40 e0 00 00 01 2c
skb linear:   00000040: 00 00 00 78 00 00 00 00 fd 5f 42 68 23 87 a8 81
skb linear:   00000050: 00 00 00 00 00 00 00 00 01 01 02 40 43 80 00 00
skb tailroom: 00000000: ...
skb tailroom: 00000010: ...
skb tailroom: 00000020: ...
skb tailroom: 00000030: ...

Call Trace, how it happens exactly:
 ...
 macvlan_handle_frame+0x321/0x425 [macvlan]
 ? macvlan_forward_source+0x110/0x110 [macvlan]
 __netif_receive_skb_core+0x545/0xda0
 ? enqueue_task_fair+0xe5/0x8e0
 ? __netif_receive_skb_one_core+0x36/0x70
 __netif_receive_skb_one_core+0x36/0x70
 process_backlog+0x97/0x140
 net_rx_action+0x1eb/0x350
 ? __hrtimer_run_queues+0x136/0x2e0
 __do_softirq+0xe3/0x383
 do_softirq_own_stack+0x2a/0x40
 </IRQ>
 do_softirq.part.4+0x4e/0x50
 netif_rx_ni+0x60/0xd0
 dev_loopback_xmit+0x83/0xf0
 ip6_finish_output2+0x575/0x590 [ipv6]
 ? ip6_cork_release.isra.1+0x64/0x90 [ipv6]
 ? __ip6_make_skb+0x38d/0x680 [ipv6]
 ? ip6_output+0x6c/0x140 [ipv6]
 ip6_output+0x6c/0x140 [ipv6]
 ip6_send_skb+0x1e/0x60 [ipv6]
 rawv6_sendmsg+0xc4b/0xe10 [ipv6]
 ? proc_put_long+0xd0/0xd0
 ? rw_copy_check_uvector+0x4e/0x110
 ? sock_sendmsg+0x36/0x40
 sock_sendmsg+0x36/0x40
 ___sys_sendmsg+0x2b6/0x2d0
 ? proc_dointvec+0x23/0x30
 ? addrconf_sysctl_forward+0x8d/0x250 [ipv6]
 ? dev_forward_change+0x130/0x130 [ipv6]
 ? _raw_spin_unlock+0x12/0x30
 ? proc_sys_call_handler.isra.14+0x9f/0x110
 ? __call_rcu+0x213/0x510
 ? get_max_files+0x10/0x10
 ? trace_hardirqs_on+0x2c/0xe0
 ? __sys_sendmsg+0x63/0xa0
 __sys_sendmsg+0x63/0xa0
 do_syscall_64+0x6c/0x1e0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/macvlan.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 0ce1004a8d0d..9d3209ae41cf 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -447,6 +447,10 @@ static rx_handler_result_t macvlan_handle_frame(struct sk_buff **pskb)
 	int ret;
 	rx_handler_result_t handle_res;
 
+	/* Packets from dev_loopback_xmit() do not have L2 header, bail out */
+	if (unlikely(skb->pkt_type == PACKET_LOOPBACK))
+		return RX_HANDLER_PASS;
+
 	port = macvlan_port_get_rcu(skb->dev);
 	if (is_multicast_ether_addr(eth->h_dest)) {
 		unsigned int hash;
-- 
2.25.1

[PATCH 5.4 137/261] PCI: Dont disable decoding when mmio_always_on is set

[Greg Kroah-Hartman]

From: Jiaxun Yang <jiaxun.yang@flygoat.com>

[ Upstream commit b6caa1d8c80cb71b6162cb1f1ec13aa655026c9f ]

Don't disable MEM/IO decoding when a device have both non_compliant_bars
and mmio_always_on.

That would allow us quirk devices with junk in BARs but can't disable
their decoding.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Acked-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/probe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index d3033873395d..48209d915de3 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1777,7 +1777,7 @@ int pci_setup_device(struct pci_dev *dev)
 	/* Device class may be changed after fixup */
 	class = dev->class >> 8;
 
-	if (dev->non_compliant_bars) {
+	if (dev->non_compliant_bars && !dev->mmio_always_on) {
 		pci_read_config_word(dev, PCI_COMMAND, &cmd);
 		if (cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
 			pci_info(dev, "device has non-compliant BARs; disabling IO/MEM decoding\n");
-- 
2.25.1

[PATCH 5.4 138/261] MIPS: Fix IRQ tracing when call handle_fpe() and handle_msa_fpe()

[Greg Kroah-Hartman]

From: YuanJunQing <yuanjunqing66@163.com>

[ Upstream commit 31e1b3efa802f97a17628dde280006c4cee4ce5e ]

Register "a1" is unsaved in this function,
 when CONFIG_TRACE_IRQFLAGS is enabled,
 the TRACE_IRQS_OFF macro will call trace_hardirqs_off(),
 and this may change register "a1".
 The changed register "a1" as argument will be send
 to do_fpe() and do_msa_fpe().

Signed-off-by: YuanJunQing <yuanjunqing66@163.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/kernel/genex.S | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index efde27c99414..9c5f8a5d097f 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -474,20 +474,20 @@ NESTED(nmi_handler, PT_SIZE, sp)
 	.endm
 
 	.macro	__build_clear_fpe
+	CLI
+	TRACE_IRQS_OFF
 	.set	push
 	/* gas fails to assemble cfc1 for some archs (octeon).*/ \
 	.set	mips1
 	SET_HARDFLOAT
 	cfc1	a1, fcr31
 	.set	pop
-	CLI
-	TRACE_IRQS_OFF
 	.endm
 
 	.macro	__build_clear_msa_fpe
-	_cfcmsa	a1, MSA_CSR
 	CLI
 	TRACE_IRQS_OFF
+	_cfcmsa	a1, MSA_CSR
 	.endm
 
 	.macro	__build_clear_ade
-- 
2.25.1

[PATCH 5.4 139/261] bcache: fix refcount underflow in bcache_device_free()

[Greg Kroah-Hartman]

From: Coly Li <colyli@suse.de>

[ Upstream commit 86da9f736740eba602389908574dfbb0f517baa5 ]

The problematic code piece in bcache_device_free() is,

 785 static void bcache_device_free(struct bcache_device *d)
 786 {
 787     struct gendisk *disk = d->disk;
 [snipped]
 799     if (disk) {
 800             if (disk->flags & GENHD_FL_UP)
 801                     del_gendisk(disk);
 802
 803             if (disk->queue)
 804                     blk_cleanup_queue(disk->queue);
 805
 806             ida_simple_remove(&bcache_device_idx,
 807                               first_minor_to_idx(disk->first_minor));
 808             put_disk(disk);
 809         }
 [snipped]
 816 }

At line 808, put_disk(disk) may encounter kobject refcount of 'disk'
being underflow.

Here is how to reproduce the issue,
- Attche the backing device to a cache device and do random write to
  make the cache being dirty.
- Stop the bcache device while the cache device has dirty data of the
  backing device.
- Only register the backing device back, NOT register cache device.
- The bcache device node /dev/bcache0 won't show up, because backing
  device waits for the cache device shows up for the missing dirty
  data.
- Now echo 1 into /sys/fs/bcache/pendings_cleanup, to stop the pending
  backing device.
- After the pending backing device stopped, use 'dmesg' to check kernel
  message, a use-after-free warning from KASA reported the refcount of
  kobject linked to the 'disk' is underflow.

The dropping refcount at line 808 in the above code piece is added by
add_disk(d->disk) in bch_cached_dev_run(). But in the above condition
the cache device is not registered, bch_cached_dev_run() has no chance
to be called and the refcount is not added. The put_disk() for a non-
added refcount of gendisk kobject triggers a underflow warning.

This patch checks whether GENHD_FL_UP is set in disk->flags, if it is
not set then the bcache device was not added, don't call put_disk()
and the the underflow issue can be avoided.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/super.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index 658b0f4a01f5..68901745eb20 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -789,7 +789,9 @@ static void bcache_device_free(struct bcache_device *d)
 		bcache_device_detach(d);
 
 	if (disk) {
-		if (disk->flags & GENHD_FL_UP)
+		bool disk_added = (disk->flags & GENHD_FL_UP) != 0;
+
+		if (disk_added)
 			del_gendisk(disk);
 
 		if (disk->queue)
@@ -797,7 +799,8 @@ static void bcache_device_free(struct bcache_device *d)
 
 		ida_simple_remove(&bcache_device_idx,
 				  first_minor_to_idx(disk->first_minor));
-		put_disk(disk);
+		if (disk_added)
+			put_disk(disk);
 	}
 
 	bioset_exit(&d->bio_split);
-- 
2.25.1

[PATCH 5.4 140/261] mmc: sdhci-msm: Set SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 quirk

[Greg Kroah-Hartman]

From: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>

[ Upstream commit d863cb03fb2aac07f017b2a1d923cdbc35021280 ]

sdhci-msm can support auto cmd12.
So enable SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 quirk.

Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1587363626-20413-3-git-send-email-vbadigan@codeaurora.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/sdhci-msm.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 8b2a6a362c60..84cffdef264b 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -1742,7 +1742,9 @@ static const struct sdhci_ops sdhci_msm_ops = {
 static const struct sdhci_pltfm_data sdhci_msm_pdata = {
 	.quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
 		  SDHCI_QUIRK_SINGLE_POWER_WRITE |
-		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
+		  SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12,
+
 	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
 	.ops = &sdhci_msm_ops,
 };
-- 
2.25.1

[PATCH 5.4 141/261] staging: greybus: sdio: Respect the cmd->busy_timeout from the mmc core

[Greg Kroah-Hartman]

From: Ulf Hansson <ulf.hansson@linaro.org>

[ Upstream commit a389087ee9f195fcf2f31cd771e9ec5f02c16650 ]

Using a fixed 1s timeout for all commands is a bit problematic.

For some commands it means waiting longer than needed for the timeout to
expire, which may not a big issue, but still. For other commands, like for
an erase (CMD38) that uses a R1B response, may require longer timeouts than
1s. In these cases, we may end up treating the command as it failed, while
it just needed some more time to complete successfully.

Fix the problem by respecting the cmd->busy_timeout, which is provided by
the mmc core.

Cc: Rui Miguel Silva <rmfrfs@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: greybus-dev@lists.linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200414161413.3036-20-ulf.hansson@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/greybus/sdio.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/greybus/sdio.c b/drivers/staging/greybus/sdio.c
index 68c5718be827..c4b16bb5c1a4 100644
--- a/drivers/staging/greybus/sdio.c
+++ b/drivers/staging/greybus/sdio.c
@@ -411,6 +411,7 @@ static int gb_sdio_command(struct gb_sdio_host *host, struct mmc_command *cmd)
 	struct gb_sdio_command_request request = {0};
 	struct gb_sdio_command_response response;
 	struct mmc_data *data = host->mrq->data;
+	unsigned int timeout_ms;
 	u8 cmd_flags;
 	u8 cmd_type;
 	int i;
@@ -469,9 +470,12 @@ static int gb_sdio_command(struct gb_sdio_host *host, struct mmc_command *cmd)
 		request.data_blksz = cpu_to_le16(data->blksz);
 	}
 
-	ret = gb_operation_sync(host->connection, GB_SDIO_TYPE_COMMAND,
-				&request, sizeof(request), &response,
-				sizeof(response));
+	timeout_ms = cmd->busy_timeout ? cmd->busy_timeout :
+		GB_OPERATION_TIMEOUT_DEFAULT;
+
+	ret = gb_operation_sync_timeout(host->connection, GB_SDIO_TYPE_COMMAND,
+					&request, sizeof(request), &response,
+					sizeof(response), timeout_ms);
 	if (ret < 0)
 		goto out;
 
-- 
2.25.1

[PATCH 5.4 142/261] mmc: via-sdmmc: Respect the cmd->busy_timeout from the mmc core

[Greg Kroah-Hartman]

From: Ulf Hansson <ulf.hansson@linaro.org>

[ Upstream commit 966244ccd2919e28f25555a77f204cd1c109cad8 ]

Using a fixed 1s timeout for all commands (and data transfers) is a bit
problematic.

For some commands it means waiting longer than needed for the timer to
expire, which may not a big issue, but still. For other commands, like for
an erase (CMD38) that uses a R1B response, may require longer timeouts than
1s. In these cases, we may end up treating the command as it failed, while
it just needed some more time to complete successfully.

Fix the problem by respecting the cmd->busy_timeout, which is provided by
the mmc core.

Cc: Bruce Chang <brucechang@via.com.tw>
Cc: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20200414161413.3036-17-ulf.hansson@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/via-sdmmc.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c
index f4ac064ff471..8d96ecba1b55 100644
--- a/drivers/mmc/host/via-sdmmc.c
+++ b/drivers/mmc/host/via-sdmmc.c
@@ -319,6 +319,8 @@ struct via_crdr_mmc_host {
 /* some devices need a very long delay for power to stabilize */
 #define VIA_CRDR_QUIRK_300MS_PWRDELAY	0x0001
 
+#define VIA_CMD_TIMEOUT_MS		1000
+
 static const struct pci_device_id via_ids[] = {
 	{PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_9530,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
@@ -551,14 +553,17 @@ static void via_sdc_send_command(struct via_crdr_mmc_host *host,
 {
 	void __iomem *addrbase;
 	struct mmc_data *data;
+	unsigned int timeout_ms;
 	u32 cmdctrl = 0;
 
 	WARN_ON(host->cmd);
 
 	data = cmd->data;
-	mod_timer(&host->timer, jiffies + HZ);
 	host->cmd = cmd;
 
+	timeout_ms = cmd->busy_timeout ? cmd->busy_timeout : VIA_CMD_TIMEOUT_MS;
+	mod_timer(&host->timer, jiffies + msecs_to_jiffies(timeout_ms));
+
 	/*Command index*/
 	cmdctrl = cmd->opcode << 8;
 
-- 
2.25.1

[PATCH 5.4 143/261] ice: fix potential double free in probe unrolling

[Greg Kroah-Hartman]

From: Jacob Keller <jacob.e.keller@intel.com>

[ Upstream commit bc3a024101ca497bea4c69be4054c32a5c349f1d ]

If ice_init_interrupt_scheme fails, ice_probe will jump to clearing up
the interrupts. This can lead to some static analysis tools such as the
compiler sanitizers complaining about double free problems.

Since ice_init_interrupt_scheme already unrolls internally on failure,
there is no need to call ice_clear_interrupt_scheme when it fails. Add
a new unroll label and use that instead.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 2408f0de95fc..d0ccb7ad447b 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -2900,7 +2900,7 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
 	if (err) {
 		dev_err(dev, "ice_init_interrupt_scheme failed: %d\n", err);
 		err = -EIO;
-		goto err_init_interrupt_unroll;
+		goto err_init_vsi_unroll;
 	}
 
 	/* Driver is mostly up */
@@ -2986,6 +2986,7 @@ err_msix_misc_unroll:
 	ice_free_irq_msix_misc(pf);
 err_init_interrupt_unroll:
 	ice_clear_interrupt_scheme(pf);
+err_init_vsi_unroll:
 	devm_kfree(dev, pf->vsi);
 err_init_pf_unroll:
 	ice_deinit_pf(pf);
-- 
2.25.1

[PATCH 5.4 144/261] ixgbe: fix signed-integer-overflow warning

[Greg Kroah-Hartman]

From: Xie XiuQi <xiexiuqi@huawei.com>

[ Upstream commit 3b70683fc4d68f5d915d9dc7e5ba72c732c7315c ]

ubsan report this warning, fix it by adding a unsigned suffix.

UBSAN: signed-integer-overflow in
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c:2246:26
65535 * 65537 cannot be represented in type 'int'
CPU: 21 PID: 7 Comm: kworker/u256:0 Not tainted 5.7.0-rc3-debug+ #39
Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 03/27/2020
Workqueue: ixgbe ixgbe_service_task [ixgbe]
Call trace:
 dump_backtrace+0x0/0x3f0
 show_stack+0x28/0x38
 dump_stack+0x154/0x1e4
 ubsan_epilogue+0x18/0x60
 handle_overflow+0xf8/0x148
 __ubsan_handle_mul_overflow+0x34/0x48
 ixgbe_fc_enable_generic+0x4d0/0x590 [ixgbe]
 ixgbe_service_task+0xc20/0x1f78 [ixgbe]
 process_one_work+0x8f0/0xf18
 worker_thread+0x430/0x6d0
 kthread+0x218/0x238
 ret_from_fork+0x10/0x18

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 0bd1294ba517..39c5e6fdb72c 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -2243,7 +2243,7 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw)
 	}
 
 	/* Configure pause time (2 TCs per register) */
-	reg = hw->fc.pause_time * 0x00010001;
+	reg = hw->fc.pause_time * 0x00010001U;
 	for (i = 0; i < (MAX_TRAFFIC_CLASS / 2); i++)
 		IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
 
-- 
2.25.1

[PATCH 5.4 145/261] iwlwifi: mvm: fix aux station leak

[Greg Kroah-Hartman]

From: Sharon <sara.sharon@intel.com>

[ Upstream commit f327236df2afc8c3c711e7e070f122c26974f4da ]

When mvm is initialized we alloc aux station with aux queue.
We later free the station memory when driver is stopped, but we
never free the queue's memory, which casues a leak.

Add a proper de-initialization of the station.

Signed-off-by: Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200529092401.0121c5be55e9.Id7516fbb3482131d0c9dfb51ff20b226617ddb49@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/intel/iwlwifi/mvm/mac80211.c  |  5 ++---
 drivers/net/wireless/intel/iwlwifi/mvm/sta.c   | 18 +++++++++++++-----
 drivers/net/wireless/intel/iwlwifi/mvm/sta.h   |  6 +++---
 3 files changed, 18 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index 6ca087ffd163..ed92a8e8cd51 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -1193,14 +1193,13 @@ void __iwl_mvm_mac_stop(struct iwl_mvm *mvm)
 	 */
 	flush_work(&mvm->roc_done_wk);
 
+	iwl_mvm_rm_aux_sta(mvm);
+
 	iwl_mvm_stop_device(mvm);
 
 	iwl_mvm_async_handlers_purge(mvm);
 	/* async_handlers_list is empty and will stay empty: HW is stopped */
 
-	/* the fw is stopped, the aux sta is dead: clean up driver state */
-	iwl_mvm_del_aux_sta(mvm);
-
 	/*
 	 * Clear IN_HW_RESTART and HW_RESTART_REQUESTED flag when stopping the
 	 * hw (as restart_complete() won't be called in this case) and mac80211
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
index 71d339e90a9e..41f62793a57c 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
@@ -2080,16 +2080,24 @@ int iwl_mvm_rm_snif_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 	return ret;
 }
 
-void iwl_mvm_dealloc_snif_sta(struct iwl_mvm *mvm)
+int iwl_mvm_rm_aux_sta(struct iwl_mvm *mvm)
 {
-	iwl_mvm_dealloc_int_sta(mvm, &mvm->snif_sta);
-}
+	int ret;
 
-void iwl_mvm_del_aux_sta(struct iwl_mvm *mvm)
-{
 	lockdep_assert_held(&mvm->mutex);
 
+	iwl_mvm_disable_txq(mvm, NULL, mvm->aux_queue, IWL_MAX_TID_COUNT, 0);
+	ret = iwl_mvm_rm_sta_common(mvm, mvm->aux_sta.sta_id);
+	if (ret)
+		IWL_WARN(mvm, "Failed sending remove station\n");
 	iwl_mvm_dealloc_int_sta(mvm, &mvm->aux_sta);
+
+	return ret;
+}
+
+void iwl_mvm_dealloc_snif_sta(struct iwl_mvm *mvm)
+{
+	iwl_mvm_dealloc_int_sta(mvm, &mvm->snif_sta);
 }
 
 /*
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h
index 8d70093847cb..da2d1ac01229 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h
@@ -8,7 +8,7 @@
  * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
  * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
  * Copyright(c) 2015 - 2016 Intel Deutschland GmbH
- * Copyright(c) 2018 - 2019 Intel Corporation
+ * Copyright(c) 2018 - 2020 Intel Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -31,7 +31,7 @@
  * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
  * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
  * Copyright(c) 2015 - 2016 Intel Deutschland GmbH
- * Copyright(c) 2018 - 2019 Intel Corporation
+ * Copyright(c) 2018 - 2020 Intel Corporation
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -541,7 +541,7 @@ int iwl_mvm_sta_tx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
 		       int tid, u8 queue, bool start);
 
 int iwl_mvm_add_aux_sta(struct iwl_mvm *mvm);
-void iwl_mvm_del_aux_sta(struct iwl_mvm *mvm);
+int iwl_mvm_rm_aux_sta(struct iwl_mvm *mvm);
 
 int iwl_mvm_alloc_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
 int iwl_mvm_send_add_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
-- 
2.25.1

[PATCH 5.4 146/261] mmc: sdhci-esdhc-imx: fix the mask for tuning start point

[Greg Kroah-Hartman]

From: Haibo Chen <haibo.chen@nxp.com>

[ Upstream commit 1194be8c949b8190b2882ad8335a5d98aa50c735 ]

According the RM, the bit[6~0] of register ESDHC_TUNING_CTRL is
TUNING_START_TAP, bit[7] of this register is to disable the command
CRC check for standard tuning. So fix it here.

Fixes: d87fc9663688 ("mmc: sdhci-esdhc-imx: support setting tuning start point")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/1590488522-9292-1-git-send-email-haibo.chen@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/sdhci-esdhc-imx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index dccb4df46512..b03d65222622 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -87,7 +87,7 @@
 #define ESDHC_STD_TUNING_EN		(1 << 24)
 /* NOTE: the minimum valid tuning start tap for mx6sl is 1 */
 #define ESDHC_TUNING_START_TAP_DEFAULT	0x1
-#define ESDHC_TUNING_START_TAP_MASK	0xff
+#define ESDHC_TUNING_START_TAP_MASK	0x7f
 #define ESDHC_TUNING_STEP_MASK		0x00070000
 #define ESDHC_TUNING_STEP_SHIFT		16
 
-- 
2.25.1

[PATCH 5.4 147/261] spi: dw: Return any value retrieved from the dma_transfer callback

[Greg Kroah-Hartman]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

[ Upstream commit f0410bbf7d0fb80149e3b17d11d31f5b5197873e ]

DW APB SSI DMA-part of the driver may need to perform the requested
SPI-transfer synchronously. In that case the dma_transfer() callback
will return 0 as a marker of the SPI transfer being finished so the
SPI core doesn't need to wait and may proceed with the SPI message
trasnfers pumping procedure. This will be needed to fix the problem
when DMA transactions are finished, but there is still data left in
the SPI Tx/Rx FIFOs being sent/received. But for now make dma_transfer
to return 1 as the normal dw_spi_transfer_one() method.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200529131205.31838-3-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-dw-mid.c | 2 +-
 drivers/spi/spi-dw.c     | 7 ++-----
 2 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index b044d4071690..b07710c76fc9 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -266,7 +266,7 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, struct spi_transfer *xfer)
 		dma_async_issue_pending(dws->txchan);
 	}
 
-	return 0;
+	return 1;
 }
 
 static void mid_spi_dma_stop(struct dw_spi *dws)
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 07d1c170c657..c2f96941ad04 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -381,11 +381,8 @@ static int dw_spi_transfer_one(struct spi_controller *master,
 
 	spi_enable_chip(dws, 1);
 
-	if (dws->dma_mapped) {
-		ret = dws->dma_ops->dma_transfer(dws, transfer);
-		if (ret < 0)
-			return ret;
-	}
+	if (dws->dma_mapped)
+		return dws->dma_ops->dma_transfer(dws, transfer);
 
 	if (chip->poll_mode)
 		return poll_transfer(dws);
-- 
2.25.1

[PATCH 5.4 148/261] cpuidle: Fix three reference count leaks

[Greg Kroah-Hartman]

From: Qiushi Wu <wu000273@umn.edu>

[ Upstream commit c343bf1ba5efcbf2266a1fe3baefec9cc82f867f ]

kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.

Previous commit "b8eb718348b8" fixed a similar problem.

Signed-off-by: Qiushi Wu <wu000273@umn.edu>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpuidle/sysfs.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index 2bb2683b493c..f8747322b3c7 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -480,7 +480,7 @@ static int cpuidle_add_state_sysfs(struct cpuidle_device *device)
 		ret = kobject_init_and_add(&kobj->kobj, &ktype_state_cpuidle,
 					   &kdev->kobj, "state%d", i);
 		if (ret) {
-			kfree(kobj);
+			kobject_put(&kobj->kobj);
 			goto error_state;
 		}
 		cpuidle_add_s2idle_attr_group(kobj);
@@ -611,7 +611,7 @@ static int cpuidle_add_driver_sysfs(struct cpuidle_device *dev)
 	ret = kobject_init_and_add(&kdrv->kobj, &ktype_driver_cpuidle,
 				   &kdev->kobj, "driver");
 	if (ret) {
-		kfree(kdrv);
+		kobject_put(&kdrv->kobj);
 		return ret;
 	}
 
@@ -705,7 +705,7 @@ int cpuidle_add_sysfs(struct cpuidle_device *dev)
 	error = kobject_init_and_add(&kdev->kobj, &ktype_cpuidle, &cpu_dev->kobj,
 				   "cpuidle");
 	if (error) {
-		kfree(kdev);
+		kobject_put(&kdev->kobj);
 		return error;
 	}
 
-- 
2.25.1

[PATCH 5.4 149/261] platform/x86: hp-wmi: Convert simple_strtoul() to kstrtou32()

[Greg Kroah-Hartman]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 5cdc45ed3948042f0d73c6fec5ee9b59e637d0d2 ]

First of all, unsigned long can overflow u32 value on 64-bit machine.
Second, simple_strtoul() doesn't check for overflow in the input.

Convert simple_strtoul() to kstrtou32() to eliminate above issues.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/hp-wmi.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index a881b709af25..a44a2ec33287 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -461,8 +461,14 @@ static ssize_t postcode_show(struct device *dev, struct device_attribute *attr,
 static ssize_t als_store(struct device *dev, struct device_attribute *attr,
 			 const char *buf, size_t count)
 {
-	u32 tmp = simple_strtoul(buf, NULL, 10);
-	int ret = hp_wmi_perform_query(HPWMI_ALS_QUERY, HPWMI_WRITE, &tmp,
+	u32 tmp;
+	int ret;
+
+	ret = kstrtou32(buf, 10, &tmp);
+	if (ret)
+		return ret;
+
+	ret = hp_wmi_perform_query(HPWMI_ALS_QUERY, HPWMI_WRITE, &tmp,
 				       sizeof(tmp), sizeof(tmp));
 	if (ret)
 		return ret < 0 ? ret : -EINVAL;
-- 
2.25.1

[PATCH 5.4 150/261] platform/x86: intel-hid: Add a quirk to support HP Spectre X2 (2015)

[Greg Kroah-Hartman]

From: Nickolai Kozachenko <daemongloom@gmail.com>

[ Upstream commit 8fe63eb757ac6e661a384cc760792080bdc738dc ]

HEBC method reports capabilities of 5 button array but HP Spectre X2 (2015)
does not have this control method (the same was for Wacom MobileStudio Pro).
Expand previous DMI quirk by Alex Hung to also enable 5 button array
for this system.

Signed-off-by: Nickolai Kozachenko <daemongloom@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel-hid.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/platform/x86/intel-hid.c b/drivers/platform/x86/intel-hid.c
index ef6d4bd77b1a..7a506c1d0113 100644
--- a/drivers/platform/x86/intel-hid.c
+++ b/drivers/platform/x86/intel-hid.c
@@ -77,6 +77,13 @@ static const struct dmi_system_id button_array_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Wacom MobileStudio Pro 16"),
 		},
 	},
+	{
+		.ident = "HP Spectre x2 (2015)",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP Spectre x2 Detachable"),
+		},
+	},
 	{ }
 };
 
-- 
2.25.1

[PATCH 5.4 151/261] platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit cfae58ed681c5fe0185db843013ecc71cd265ebf ]

The HP Stream x360 11-p000nd no longer report SW_TABLET_MODE state / events
with recent kernels. This model reports a chassis-type of 10 / "Notebook"
which is not on the recently introduced chassis-type whitelist

Commit de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode
switch on 2-in-1's") added a chassis-type whitelist and only listed 31 /
"Convertible" as being capable of generating valid SW_TABLET_MOD events.

Commit 1fac39fd0316 ("platform/x86: intel-vbtn: Also handle tablet-mode
switch on "Detachable" and "Portable" chassis-types") extended the
whitelist with chassis-types 8 / "Portable" and 32 / "Detachable".

And now we need to exten the whitelist again with 10 / "Notebook"...

The issue original fixed by the whitelist is really a ACPI DSDT bug on
the Dell XPS 9360 where it has a VGBS which reports it is in tablet mode
even though it is not a 2-in-1 at all, but a regular laptop.

So since this is a workaround for a DSDT issue on that specific model,
instead of extending the whitelist over and over again, lets switch to
a blacklist and only blacklist the chassis-type of the model for which
the chassis-type check was added.

Note this also fixes the current version of the code no longer checking
if dmi_get_system_info(DMI_CHASSIS_TYPE) returns NULL.

Fixes: 1fac39fd0316 ("platform/x86: intel-vbtn: Also handle tablet-mode switch on "Detachable" and "Portable" chassis-types")
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <Mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel-vbtn.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c
index 5acfa08b5dac..cb2a80fdd8f4 100644
--- a/drivers/platform/x86/intel-vbtn.c
+++ b/drivers/platform/x86/intel-vbtn.c
@@ -157,21 +157,18 @@ static void detect_tablet_mode(struct platform_device *device)
 static bool intel_vbtn_has_switches(acpi_handle handle)
 {
 	const char *chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE);
-	unsigned long chassis_type_int;
 	unsigned long long vgbs;
 	acpi_status status;
 
-	if (kstrtoul(chassis_type, 10, &chassis_type_int))
-		return false;
-
-	switch (chassis_type_int) {
-	case  8: /* Portable */
-	case 31: /* Convertible */
-	case 32: /* Detachable */
-		break;
-	default:
+	/*
+	 * Some normal laptops have a VGBS method despite being non-convertible
+	 * and their VGBS method always returns 0, causing detect_tablet_mode()
+	 * to report SW_TABLET_MODE=1 to userspace, which causes issues.
+	 * These laptops have a DMI chassis_type of 9 ("Laptop"), do not report
+	 * switches on any devices with a DMI chassis_type of 9.
+	 */
+	if (chassis_type && strcmp(chassis_type, "9") == 0)
 		return false;
-	}
 
 	status = acpi_evaluate_integer(handle, "VGBS", NULL, &vgbs);
 	return ACPI_SUCCESS(status);
-- 
2.25.1

[PATCH 5.4 152/261] platform/x86: asus_wmi: Reserve more space for struct bias_args

[Greg Kroah-Hartman]

From: Chris Chiu <chiu@endlessm.com>

[ Upstream commit 7b91f1565fbfbe5a162d91f8a1f6c5580c2fc1d0 ]

On the ASUS laptop UX325JA/UX425JA, most of the media keys are not
working due to the ASUS WMI driver fails to be loaded. The ACPI error
as follows leads to the failure of asus_wmi_evaluate_method.
  ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [IIA3] at bit offset/length 96/32 exceeds size of target Buffer (96 bits) (20200326/dsopcode-203)
  No Local Variables are initialized for Method [WMNB]
  ACPI Error: Aborting method \_SB.ATKD.WMNB due to previous error (AE_AML_BUFFER_LIMIT) (20200326/psparse-531)

The DSDT for the WMNB part shows that 5 DWORD required for local
variables and the 3rd variable IIA3 hit the buffer limit.

Method (WMNB, 3, Serialized)
{ ..
    CreateDWordField (Arg2, Zero, IIA0)
    CreateDWordField (Arg2, 0x04, IIA1)
    CreateDWordField (Arg2, 0x08, IIA2)
    CreateDWordField (Arg2, 0x0C, IIA3)
    CreateDWordField (Arg2, 0x10, IIA4)
    Local0 = (Arg1 & 0xFFFFFFFF)
    If ((Local0 == 0x54494E49))
  ..
}

The limitation is determined by the input acpi_buffer size passed
to the wmi_evaluate_method. Since the struct bios_args is the data
structure used as input buffer by default for all ASUS WMI calls,
the size needs to be expanded to fix the problem.

Signed-off-by: Chris Chiu <chiu@endlessm.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/asus-wmi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 41e28552b2ce..b1f4a31ba1ee 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -111,6 +111,8 @@ struct bios_args {
 	u32 arg0;
 	u32 arg1;
 	u32 arg2; /* At least TUF Gaming series uses 3 dword input buffer. */
+	u32 arg4;
+	u32 arg5;
 } __packed;
 
 /*
-- 
2.25.1

[PATCH 5.4 153/261] libbpf: Fix perf_buffer__free() API for sparse allocs

[Greg Kroah-Hartman]

From: Eelco Chaudron <echaudro@redhat.com>

[ Upstream commit 601b05ca6edb0422bf6ce313fbfd55ec7bbbc0fd ]

In case the cpu_bufs are sparsely allocated they are not all
free'ed. These changes will fix this.

Fixes: fb84b8224655 ("libbpf: add perf buffer API")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159056888305.330763.9684536967379110349.stgit@ebuild
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/libbpf.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index 281cc65276e0..2a1dbf52fc9a 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -5358,9 +5358,12 @@ void perf_buffer__free(struct perf_buffer *pb)
 	if (!pb)
 		return;
 	if (pb->cpu_bufs) {
-		for (i = 0; i < pb->cpu_cnt && pb->cpu_bufs[i]; i++) {
+		for (i = 0; i < pb->cpu_cnt; i++) {
 			struct perf_cpu_buf *cpu_buf = pb->cpu_bufs[i];
 
+			if (!cpu_buf)
+				continue;
+
 			bpf_map_delete_elem(pb->map_fd, &cpu_buf->map_key);
 			perf_buffer__free_cpu_buf(pb, cpu_buf);
 		}
-- 
2.25.1

[PATCH 5.4 154/261] bpf: Fix map permissions check

[Greg Kroah-Hartman]

From: Anton Protopopov <a.s.protopopov@gmail.com>

[ Upstream commit 1ea0f9120c8ce105ca181b070561df5cbd6bc049 ]

The map_lookup_and_delete_elem() function should check for both FMODE_CAN_WRITE
and FMODE_CAN_READ permissions because it returns a map element to user space.

Fixes: bd513cd08f10 ("bpf: add MAP_LOOKUP_AND_DELETE_ELEM syscall")
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200527185700.14658-5-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/syscall.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index 946cfdd3b2cc..e7af1ac69d75 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -1118,7 +1118,8 @@ static int map_lookup_and_delete_elem(union bpf_attr *attr)
 	map = __bpf_map_get(f);
 	if (IS_ERR(map))
 		return PTR_ERR(map);
-	if (!(map_get_sys_perms(map, f) & FMODE_CAN_WRITE)) {
+	if (!(map_get_sys_perms(map, f) & FMODE_CAN_READ) ||
+	    !(map_get_sys_perms(map, f) & FMODE_CAN_WRITE)) {
 		err = -EPERM;
 		goto err_put;
 	}
-- 
2.25.1

[PATCH 5.4 155/261] bpf: Refactor sockmap redirect code so its easy to reuse

[Greg Kroah-Hartman]

From: John Fastabend <john.fastabend@gmail.com>

[ Upstream commit ca2f5f21dbbd5e3a00cd3e97f728aa2ca0b2e011 ]

We will need this block of code called from tls context shortly
lets refactor the redirect logic so its easy to use. This also
cleans up the switch stmt so we have fewer fallthrough cases.

No logic changes are intended.

Fixes: d829e9c4112b5 ("tls: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/159079360110.5745.7024009076049029819.stgit@john-Precision-5820-Tower
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/skmsg.c | 55 ++++++++++++++++++++++++++++++------------------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/net/core/skmsg.c b/net/core/skmsg.c
index ded2d5227678..8e538a28fe0d 100644
--- a/net/core/skmsg.c
+++ b/net/core/skmsg.c
@@ -686,13 +686,43 @@ static struct sk_psock *sk_psock_from_strp(struct strparser *strp)
 	return container_of(parser, struct sk_psock, parser);
 }
 
-static void sk_psock_verdict_apply(struct sk_psock *psock,
-				   struct sk_buff *skb, int verdict)
+static void sk_psock_skb_redirect(struct sk_psock *psock, struct sk_buff *skb)
 {
 	struct sk_psock *psock_other;
 	struct sock *sk_other;
 	bool ingress;
 
+	sk_other = tcp_skb_bpf_redirect_fetch(skb);
+	if (unlikely(!sk_other)) {
+		kfree_skb(skb);
+		return;
+	}
+	psock_other = sk_psock(sk_other);
+	if (!psock_other || sock_flag(sk_other, SOCK_DEAD) ||
+	    !sk_psock_test_state(psock_other, SK_PSOCK_TX_ENABLED)) {
+		kfree_skb(skb);
+		return;
+	}
+
+	ingress = tcp_skb_bpf_ingress(skb);
+	if ((!ingress && sock_writeable(sk_other)) ||
+	    (ingress &&
+	     atomic_read(&sk_other->sk_rmem_alloc) <=
+	     sk_other->sk_rcvbuf)) {
+		if (!ingress)
+			skb_set_owner_w(skb, sk_other);
+		skb_queue_tail(&psock_other->ingress_skb, skb);
+		schedule_work(&psock_other->work);
+	} else {
+		kfree_skb(skb);
+	}
+}
+
+static void sk_psock_verdict_apply(struct sk_psock *psock,
+				   struct sk_buff *skb, int verdict)
+{
+	struct sock *sk_other;
+
 	switch (verdict) {
 	case __SK_PASS:
 		sk_other = psock->sk;
@@ -711,25 +741,8 @@ static void sk_psock_verdict_apply(struct sk_psock *psock,
 		}
 		goto out_free;
 	case __SK_REDIRECT:
-		sk_other = tcp_skb_bpf_redirect_fetch(skb);
-		if (unlikely(!sk_other))
-			goto out_free;
-		psock_other = sk_psock(sk_other);
-		if (!psock_other || sock_flag(sk_other, SOCK_DEAD) ||
-		    !sk_psock_test_state(psock_other, SK_PSOCK_TX_ENABLED))
-			goto out_free;
-		ingress = tcp_skb_bpf_ingress(skb);
-		if ((!ingress && sock_writeable(sk_other)) ||
-		    (ingress &&
-		     atomic_read(&sk_other->sk_rmem_alloc) <=
-		     sk_other->sk_rcvbuf)) {
-			if (!ingress)
-				skb_set_owner_w(skb, sk_other);
-			skb_queue_tail(&psock_other->ingress_skb, skb);
-			schedule_work(&psock_other->work);
-			break;
-		}
-		/* fall-through */
+		sk_psock_skb_redirect(psock, skb);
+		break;
 	case __SK_DROP:
 		/* fall-through */
 	default:
-- 
2.25.1

[PATCH 5.4 156/261] bpf: Fix running sk_skb program types with ktls

[Greg Kroah-Hartman]

From: John Fastabend <john.fastabend@gmail.com>

[ Upstream commit e91de6afa81c10e9f855c5695eb9a53168d96b73 ]

KTLS uses a stream parser to collect TLS messages and send them to
the upper layer tls receive handler. This ensures the tls receiver
has a full TLS header to parse when it is run. However, when a
socket has BPF_SK_SKB_STREAM_VERDICT program attached before KTLS
is enabled we end up with two stream parsers running on the same
socket.

The result is both try to run on the same socket. First the KTLS
stream parser runs and calls read_sock() which will tcp_read_sock
which in turn calls tcp_rcv_skb(). This dequeues the skb from the
sk_receive_queue. When this is done KTLS code then data_ready()
callback which because we stacked KTLS on top of the bpf stream
verdict program has been replaced with sk_psock_start_strp(). This
will in turn kick the stream parser again and eventually do the
same thing KTLS did above calling into tcp_rcv_skb() and dequeuing
a skb from the sk_receive_queue.

At this point the data stream is broke. Part of the stream was
handled by the KTLS side some other bytes may have been handled
by the BPF side. Generally this results in either missing data
or more likely a "Bad Message" complaint from the kTLS receive
handler as the BPF program steals some bytes meant to be in a
TLS header and/or the TLS header length is no longer correct.

We've already broke the idealized model where we can stack ULPs
in any order with generic callbacks on the TX side to handle this.
So in this patch we do the same thing but for RX side. We add
a sk_psock_strp_enabled() helper so TLS can learn a BPF verdict
program is running and add a tls_sw_has_ctx_rx() helper so BPF
side can learn there is a TLS ULP on the socket.

Then on BPF side we omit calling our stream parser to avoid
breaking the data stream for the KTLS receiver. Then on the
KTLS side we call BPF_SK_SKB_STREAM_VERDICT once the KTLS
receiver is done with the packet but before it posts the
msg to userspace. This gives us symmetry between the TX and
RX halfs and IMO makes it usable again. On the TX side we
process packets in this order BPF -> TLS -> TCP and on
the receive side in the reverse order TCP -> TLS -> BPF.

Discovered while testing OpenSSL 3.0 Alpha2.0 release.

Fixes: d829e9c4112b5 ("tls: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/159079361946.5745.605854335665044485.stgit@john-Precision-5820-Tower
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/skmsg.h |  8 ++++++++
 include/net/tls.h     |  9 +++++++++
 net/core/skmsg.c      | 43 ++++++++++++++++++++++++++++++++++++++++---
 net/tls/tls_sw.c      | 20 ++++++++++++++++++--
 4 files changed, 75 insertions(+), 5 deletions(-)

diff --git a/include/linux/skmsg.h b/include/linux/skmsg.h
index a3adbe593505..4bdb5e4bbd6a 100644
--- a/include/linux/skmsg.h
+++ b/include/linux/skmsg.h
@@ -457,4 +457,12 @@ static inline void psock_progs_drop(struct sk_psock_progs *progs)
 	psock_set_prog(&progs->skb_verdict, NULL);
 }
 
+int sk_psock_tls_strp_read(struct sk_psock *psock, struct sk_buff *skb);
+
+static inline bool sk_psock_strp_enabled(struct sk_psock *psock)
+{
+	if (!psock)
+		return false;
+	return psock->parser.enabled;
+}
 #endif /* _LINUX_SKMSG_H */
diff --git a/include/net/tls.h b/include/net/tls.h
index db26e3ec918f..0a065bdffa39 100644
--- a/include/net/tls.h
+++ b/include/net/tls.h
@@ -590,6 +590,15 @@ static inline bool tls_sw_has_ctx_tx(const struct sock *sk)
 	return !!tls_sw_ctx_tx(ctx);
 }
 
+static inline bool tls_sw_has_ctx_rx(const struct sock *sk)
+{
+	struct tls_context *ctx = tls_get_ctx(sk);
+
+	if (!ctx)
+		return false;
+	return !!tls_sw_ctx_rx(ctx);
+}
+
 void tls_sw_write_space(struct sock *sk, struct tls_context *ctx);
 void tls_device_write_space(struct sock *sk, struct tls_context *ctx);
 
diff --git a/net/core/skmsg.c b/net/core/skmsg.c
index 8e538a28fe0d..0536ea9298e4 100644
--- a/net/core/skmsg.c
+++ b/net/core/skmsg.c
@@ -7,6 +7,7 @@
 
 #include <net/sock.h>
 #include <net/tcp.h>
+#include <net/tls.h>
 
 static bool sk_msg_try_coalesce_ok(struct sk_msg *msg, int elem_first_coalesce)
 {
@@ -718,6 +719,38 @@ static void sk_psock_skb_redirect(struct sk_psock *psock, struct sk_buff *skb)
 	}
 }
 
+static void sk_psock_tls_verdict_apply(struct sk_psock *psock,
+				       struct sk_buff *skb, int verdict)
+{
+	switch (verdict) {
+	case __SK_REDIRECT:
+		sk_psock_skb_redirect(psock, skb);
+		break;
+	case __SK_PASS:
+	case __SK_DROP:
+	default:
+		break;
+	}
+}
+
+int sk_psock_tls_strp_read(struct sk_psock *psock, struct sk_buff *skb)
+{
+	struct bpf_prog *prog;
+	int ret = __SK_PASS;
+
+	rcu_read_lock();
+	prog = READ_ONCE(psock->progs.skb_verdict);
+	if (likely(prog)) {
+		tcp_skb_bpf_redirect_clear(skb);
+		ret = sk_psock_bpf_run(psock, prog, skb);
+		ret = sk_psock_map_verd(ret, tcp_skb_bpf_redirect_fetch(skb));
+	}
+	rcu_read_unlock();
+	sk_psock_tls_verdict_apply(psock, skb, ret);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(sk_psock_tls_strp_read);
+
 static void sk_psock_verdict_apply(struct sk_psock *psock,
 				   struct sk_buff *skb, int verdict)
 {
@@ -796,9 +829,13 @@ static void sk_psock_strp_data_ready(struct sock *sk)
 	rcu_read_lock();
 	psock = sk_psock(sk);
 	if (likely(psock)) {
-		write_lock_bh(&sk->sk_callback_lock);
-		strp_data_ready(&psock->parser.strp);
-		write_unlock_bh(&sk->sk_callback_lock);
+		if (tls_sw_has_ctx_rx(sk)) {
+			psock->parser.saved_data_ready(sk);
+		} else {
+			write_lock_bh(&sk->sk_callback_lock);
+			strp_data_ready(&psock->parser.strp);
+			write_unlock_bh(&sk->sk_callback_lock);
+		}
 	}
 	rcu_read_unlock();
 }
diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c
index fbf6a496ee8b..70b203e5d5fd 100644
--- a/net/tls/tls_sw.c
+++ b/net/tls/tls_sw.c
@@ -1737,6 +1737,7 @@ int tls_sw_recvmsg(struct sock *sk,
 	long timeo;
 	bool is_kvec = iov_iter_is_kvec(&msg->msg_iter);
 	bool is_peek = flags & MSG_PEEK;
+	bool bpf_strp_enabled;
 	int num_async = 0;
 	int pending;
 
@@ -1747,6 +1748,7 @@ int tls_sw_recvmsg(struct sock *sk,
 
 	psock = sk_psock_get(sk);
 	lock_sock(sk);
+	bpf_strp_enabled = sk_psock_strp_enabled(psock);
 
 	/* Process pending decrypted records. It must be non-zero-copy */
 	err = process_rx_list(ctx, msg, &control, &cmsg, 0, len, false,
@@ -1800,11 +1802,12 @@ int tls_sw_recvmsg(struct sock *sk,
 
 		if (to_decrypt <= len && !is_kvec && !is_peek &&
 		    ctx->control == TLS_RECORD_TYPE_DATA &&
-		    prot->version != TLS_1_3_VERSION)
+		    prot->version != TLS_1_3_VERSION &&
+		    !bpf_strp_enabled)
 			zc = true;
 
 		/* Do not use async mode if record is non-data */
-		if (ctx->control == TLS_RECORD_TYPE_DATA)
+		if (ctx->control == TLS_RECORD_TYPE_DATA && !bpf_strp_enabled)
 			async_capable = ctx->async_capable;
 		else
 			async_capable = false;
@@ -1854,6 +1857,19 @@ int tls_sw_recvmsg(struct sock *sk,
 			goto pick_next_record;
 
 		if (!zc) {
+			if (bpf_strp_enabled) {
+				err = sk_psock_tls_strp_read(psock, skb);
+				if (err != __SK_PASS) {
+					rxm->offset = rxm->offset + rxm->full_len;
+					rxm->full_len = 0;
+					if (err == __SK_DROP)
+						consume_skb(skb);
+					ctx->recv_pkt = NULL;
+					__strp_unpause(&ctx->strp);
+					continue;
+				}
+			}
+
 			if (rxm->full_len > len) {
 				retain_skb = true;
 				chunk = len;
-- 
2.25.1

[PATCH 5.4 157/261] selftests/bpf, flow_dissector: Close TAP device FD after the test

[Greg Kroah-Hartman]

From: Jakub Sitnicki <jakub@cloudflare.com>

[ Upstream commit b8215dce7dfd817ca38807f55165bf502146cd68 ]

test_flow_dissector leaves a TAP device after it's finished, potentially
interfering with other tests that will run after it. Fix it by closing the
TAP descriptor on cleanup.

Fixes: 0905beec9f52 ("selftests/bpf: run flow dissector tests in skb-less mode")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-11-jakub@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/prog_tests/flow_dissector.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/testing/selftests/bpf/prog_tests/flow_dissector.c b/tools/testing/selftests/bpf/prog_tests/flow_dissector.c
index 92563898867c..9f3634c9971d 100644
--- a/tools/testing/selftests/bpf/prog_tests/flow_dissector.c
+++ b/tools/testing/selftests/bpf/prog_tests/flow_dissector.c
@@ -523,6 +523,7 @@ void test_flow_dissector(void)
 		CHECK_ATTR(err, tests[i].name, "bpf_map_delete_elem %d\n", err);
 	}
 
+	close(tap_fd);
 	bpf_prog_detach(prog_fd, BPF_FLOW_DISSECTOR);
 	bpf_object__close(obj);
 }
-- 
2.25.1

[PATCH 5.4 158/261] kasan: stop tests being eliminated as dead code with FORTIFY_SOURCE

[Greg Kroah-Hartman]

From: Daniel Axtens <dja@axtens.net>

[ Upstream commit adb72ae1915db28f934e9e02c18bfcea2f3ed3b7 ]

Patch series "Fix some incompatibilites between KASAN and FORTIFY_SOURCE", v4.

3 KASAN self-tests fail on a kernel with both KASAN and FORTIFY_SOURCE:
memchr, memcmp and strlen.

When FORTIFY_SOURCE is on, a number of functions are replaced with
fortified versions, which attempt to check the sizes of the operands.
However, these functions often directly invoke __builtin_foo() once they
have performed the fortify check.  The compiler can detect that the
results of these functions are not used, and knows that they have no other
side effects, and so can eliminate them as dead code.

Why are only memchr, memcmp and strlen affected?
================================================

Of string and string-like functions, kasan_test tests:

 * strchr  ->  not affected, no fortified version
 * strrchr ->  likewise
 * strcmp  ->  likewise
 * strncmp ->  likewise

 * strnlen ->  not affected, the fortify source implementation calls the
               underlying strnlen implementation which is instrumented, not
               a builtin

 * strlen  ->  affected, the fortify souce implementation calls a __builtin
               version which the compiler can determine is dead.

 * memchr  ->  likewise
 * memcmp  ->  likewise

 * memset ->   not affected, the compiler knows that memset writes to its
	       first argument and therefore is not dead.

Why does this not affect the functions normally?
================================================

In string.h, these functions are not marked as __pure, so the compiler
cannot know that they do not have side effects.  If relevant functions are
marked as __pure in string.h, we see the following warnings and the
functions are elided:

lib/test_kasan.c: In function `kasan_memchr':
lib/test_kasan.c:606:2: warning: statement with no effect [-Wunused-value]
  memchr(ptr, '1', size + 1);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~
lib/test_kasan.c: In function `kasan_memcmp':
lib/test_kasan.c:622:2: warning: statement with no effect [-Wunused-value]
  memcmp(ptr, arr, size+1);
  ^~~~~~~~~~~~~~~~~~~~~~~~
lib/test_kasan.c: In function `kasan_strings':
lib/test_kasan.c:645:2: warning: statement with no effect [-Wunused-value]
  strchr(ptr, '1');
  ^~~~~~~~~~~~~~~~
...

This annotation would make sense to add and could be added at any point,
so the behaviour of test_kasan.c should change.

The fix
=======

Make all the functions that are pure write their results to a global,
which makes them live.  The strlen and memchr tests now pass.

The memcmp test still fails to trigger, which is addressed in the next
patch.

[dja@axtens.net: drop patch 3]
  Link: http://lkml.kernel.org/r/20200424145521.8203-2-dja@axtens.net
Fixes: 0c96350a2d2f ("lib/test_kasan.c: add tests for several string/memory API functions")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: David Gow <davidgow@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Link: http://lkml.kernel.org/r/20200423154503.5103-1-dja@axtens.net
Link: http://lkml.kernel.org/r/20200423154503.5103-2-dja@axtens.net
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/test_kasan.c | 29 +++++++++++++++++++----------
 1 file changed, 19 insertions(+), 10 deletions(-)

diff --git a/lib/test_kasan.c b/lib/test_kasan.c
index bd3d9ef7d39e..83344c9c38f4 100644
--- a/lib/test_kasan.c
+++ b/lib/test_kasan.c
@@ -22,6 +22,14 @@
 
 #include <asm/page.h>
 
+/*
+ * We assign some test results to these globals to make sure the tests
+ * are not eliminated as dead code.
+ */
+
+int kasan_int_result;
+void *kasan_ptr_result;
+
 /*
  * Note: test functions are marked noinline so that their names appear in
  * reports.
@@ -603,7 +611,7 @@ static noinline void __init kasan_memchr(void)
 	if (!ptr)
 		return;
 
-	memchr(ptr, '1', size + 1);
+	kasan_ptr_result = memchr(ptr, '1', size + 1);
 	kfree(ptr);
 }
 
@@ -619,7 +627,7 @@ static noinline void __init kasan_memcmp(void)
 		return;
 
 	memset(arr, 0, sizeof(arr));
-	memcmp(ptr, arr, size+1);
+	kasan_int_result = memcmp(ptr, arr, size + 1);
 	kfree(ptr);
 }
 
@@ -642,22 +650,22 @@ static noinline void __init kasan_strings(void)
 	 * will likely point to zeroed byte.
 	 */
 	ptr += 16;
-	strchr(ptr, '1');
+	kasan_ptr_result = strchr(ptr, '1');
 
 	pr_info("use-after-free in strrchr\n");
-	strrchr(ptr, '1');
+	kasan_ptr_result = strrchr(ptr, '1');
 
 	pr_info("use-after-free in strcmp\n");
-	strcmp(ptr, "2");
+	kasan_int_result = strcmp(ptr, "2");
 
 	pr_info("use-after-free in strncmp\n");
-	strncmp(ptr, "2", 1);
+	kasan_int_result = strncmp(ptr, "2", 1);
 
 	pr_info("use-after-free in strlen\n");
-	strlen(ptr);
+	kasan_int_result = strlen(ptr);
 
 	pr_info("use-after-free in strnlen\n");
-	strnlen(ptr, 1);
+	kasan_int_result = strnlen(ptr, 1);
 }
 
 static noinline void __init kasan_bitops(void)
@@ -724,11 +732,12 @@ static noinline void __init kasan_bitops(void)
 	__test_and_change_bit(BITS_PER_LONG + BITS_PER_BYTE, bits);
 
 	pr_info("out-of-bounds in test_bit\n");
-	(void)test_bit(BITS_PER_LONG + BITS_PER_BYTE, bits);
+	kasan_int_result = test_bit(BITS_PER_LONG + BITS_PER_BYTE, bits);
 
 #if defined(clear_bit_unlock_is_negative_byte)
 	pr_info("out-of-bounds in clear_bit_unlock_is_negative_byte\n");
-	clear_bit_unlock_is_negative_byte(BITS_PER_LONG + BITS_PER_BYTE, bits);
+	kasan_int_result = clear_bit_unlock_is_negative_byte(BITS_PER_LONG +
+		BITS_PER_BYTE, bits);
 #endif
 	kfree(bits);
 }
-- 
2.25.1

[PATCH 5.4 159/261] string.h: fix incompatibility between FORTIFY_SOURCE and KASAN

[Greg Kroah-Hartman]

From: Daniel Axtens <dja@axtens.net>

[ Upstream commit 47227d27e2fcb01a9e8f5958d8997cf47a820afc ]

The memcmp KASAN self-test fails on a kernel with both KASAN and
FORTIFY_SOURCE.

When FORTIFY_SOURCE is on, a number of functions are replaced with
fortified versions, which attempt to check the sizes of the operands.
However, these functions often directly invoke __builtin_foo() once they
have performed the fortify check.  Using __builtins may bypass KASAN
checks if the compiler decides to inline it's own implementation as
sequence of instructions, rather than emit a function call that goes out
to a KASAN-instrumented implementation.

Why is only memcmp affected?
============================

Of the string and string-like functions that kasan_test tests, only memcmp
is replaced by an inline sequence of instructions in my testing on x86
with gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2).

I believe this is due to compiler heuristics.  For example, if I annotate
kmalloc calls with the alloc_size annotation (and disable some fortify
compile-time checking!), the compiler will replace every memset except the
one in kmalloc_uaf_memset with inline instructions.  (I have some WIP
patches to add this annotation.)

Does this affect other functions in string.h?
=============================================

Yes. Anything that uses __builtin_* rather than __real_* could be
affected. This looks like:

 - strncpy
 - strcat
 - strlen
 - strlcpy maybe, under some circumstances?
 - strncat under some circumstances
 - memset
 - memcpy
 - memmove
 - memcmp (as noted)
 - memchr
 - strcpy

Whether a function call is emitted always depends on the compiler.  Most
bugs should get caught by FORTIFY_SOURCE, but the missed memcmp test shows
that this is not always the case.

Isn't FORTIFY_SOURCE disabled with KASAN?
========================================-

The string headers on all arches supporting KASAN disable fortify with
kasan, but only when address sanitisation is _also_ disabled.  For example
from x86:

 #if defined(CONFIG_KASAN) && !defined(__SANITIZE_ADDRESS__)
 /*
  * For files that are not instrumented (e.g. mm/slub.c) we
  * should use not instrumented version of mem* functions.
  */
 #define memcpy(dst, src, len) __memcpy(dst, src, len)
 #define memmove(dst, src, len) __memmove(dst, src, len)
 #define memset(s, c, n) __memset(s, c, n)

 #ifndef __NO_FORTIFY
 #define __NO_FORTIFY /* FORTIFY_SOURCE uses __builtin_memcpy, etc. */
 #endif

 #endif

This comes from commit 6974f0c4555e ("include/linux/string.h: add the
option of fortified string.h functions"), and doesn't work when KASAN is
enabled and the file is supposed to be sanitised - as with test_kasan.c

I'm pretty sure this is not wrong, but not as expansive it should be:

 * we shouldn't use __builtin_memcpy etc in files where we don't have
   instrumentation - it could devolve into a function call to memcpy,
   which will be instrumented. Rather, we should use __memcpy which
   by convention is not instrumented.

 * we also shouldn't be using __builtin_memcpy when we have a KASAN
   instrumented file, because it could be replaced with inline asm
   that will not be instrumented.

What is correct behaviour?
==========================

Firstly, there is some overlap between fortification and KASAN: both
provide some level of _runtime_ checking. Only fortify provides
compile-time checking.

KASAN and fortify can pick up different things at runtime:

 - Some fortify functions, notably the string functions, could easily be
   modified to consider sub-object sizes (e.g. members within a struct),
   and I have some WIP patches to do this. KASAN cannot detect these
   because it cannot insert poision between members of a struct.

 - KASAN can detect many over-reads/over-writes when the sizes of both
   operands are unknown, which fortify cannot.

So there are a couple of options:

 1) Flip the test: disable fortify in santised files and enable it in
    unsanitised files. This at least stops us missing KASAN checking, but
    we lose the fortify checking.

 2) Make the fortify code always call out to real versions. Do this only
    for KASAN, for fear of losing the inlining opportunities we get from
    __builtin_*.

(We can't use kasan_check_{read,write}: because the fortify functions are
_extern inline_, you can't include _static_ inline functions without a
compiler warning. kasan_check_{read,write} are static inline so we can't
use them even when they would otherwise be suitable.)

Take approach 2 and call out to real versions when KASAN is enabled.

Use __underlying_foo to distinguish from __real_foo: __real_foo always
refers to the kernel's implementation of foo, __underlying_foo could be
either the kernel implementation or the __builtin_foo implementation.

This is sometimes enough to make the memcmp test succeed with
FORTIFY_SOURCE enabled. It is at least enough to get the function call
into the module. One more fix is needed to make it reliable: see the next
patch.

Fixes: 6974f0c4555e ("include/linux/string.h: add the option of fortified string.h functions")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: David Gow <davidgow@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Link: http://lkml.kernel.org/r/20200423154503.5103-3-dja@axtens.net
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/string.h | 60 +++++++++++++++++++++++++++++++++---------
 1 file changed, 48 insertions(+), 12 deletions(-)

diff --git a/include/linux/string.h b/include/linux/string.h
index b6ccdc2c7f02..b2264355272d 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -269,6 +269,31 @@ void __read_overflow3(void) __compiletime_error("detected read beyond size of ob
 void __write_overflow(void) __compiletime_error("detected write beyond size of object passed as 1st parameter");
 
 #if !defined(__NO_FORTIFY) && defined(__OPTIMIZE__) && defined(CONFIG_FORTIFY_SOURCE)
+
+#ifdef CONFIG_KASAN
+extern void *__underlying_memchr(const void *p, int c, __kernel_size_t size) __RENAME(memchr);
+extern int __underlying_memcmp(const void *p, const void *q, __kernel_size_t size) __RENAME(memcmp);
+extern void *__underlying_memcpy(void *p, const void *q, __kernel_size_t size) __RENAME(memcpy);
+extern void *__underlying_memmove(void *p, const void *q, __kernel_size_t size) __RENAME(memmove);
+extern void *__underlying_memset(void *p, int c, __kernel_size_t size) __RENAME(memset);
+extern char *__underlying_strcat(char *p, const char *q) __RENAME(strcat);
+extern char *__underlying_strcpy(char *p, const char *q) __RENAME(strcpy);
+extern __kernel_size_t __underlying_strlen(const char *p) __RENAME(strlen);
+extern char *__underlying_strncat(char *p, const char *q, __kernel_size_t count) __RENAME(strncat);
+extern char *__underlying_strncpy(char *p, const char *q, __kernel_size_t size) __RENAME(strncpy);
+#else
+#define __underlying_memchr	__builtin_memchr
+#define __underlying_memcmp	__builtin_memcmp
+#define __underlying_memcpy	__builtin_memcpy
+#define __underlying_memmove	__builtin_memmove
+#define __underlying_memset	__builtin_memset
+#define __underlying_strcat	__builtin_strcat
+#define __underlying_strcpy	__builtin_strcpy
+#define __underlying_strlen	__builtin_strlen
+#define __underlying_strncat	__builtin_strncat
+#define __underlying_strncpy	__builtin_strncpy
+#endif
+
 __FORTIFY_INLINE char *strncpy(char *p, const char *q, __kernel_size_t size)
 {
 	size_t p_size = __builtin_object_size(p, 0);
@@ -276,14 +301,14 @@ __FORTIFY_INLINE char *strncpy(char *p, const char *q, __kernel_size_t size)
 		__write_overflow();
 	if (p_size < size)
 		fortify_panic(__func__);
-	return __builtin_strncpy(p, q, size);
+	return __underlying_strncpy(p, q, size);
 }
 
 __FORTIFY_INLINE char *strcat(char *p, const char *q)
 {
 	size_t p_size = __builtin_object_size(p, 0);
 	if (p_size == (size_t)-1)
-		return __builtin_strcat(p, q);
+		return __underlying_strcat(p, q);
 	if (strlcat(p, q, p_size) >= p_size)
 		fortify_panic(__func__);
 	return p;
@@ -297,7 +322,7 @@ __FORTIFY_INLINE __kernel_size_t strlen(const char *p)
 	/* Work around gcc excess stack consumption issue */
 	if (p_size == (size_t)-1 ||
 	    (__builtin_constant_p(p[p_size - 1]) && p[p_size - 1] == '\0'))
-		return __builtin_strlen(p);
+		return __underlying_strlen(p);
 	ret = strnlen(p, p_size);
 	if (p_size <= ret)
 		fortify_panic(__func__);
@@ -330,7 +355,7 @@ __FORTIFY_INLINE size_t strlcpy(char *p, const char *q, size_t size)
 			__write_overflow();
 		if (len >= p_size)
 			fortify_panic(__func__);
-		__builtin_memcpy(p, q, len);
+		__underlying_memcpy(p, q, len);
 		p[len] = '\0';
 	}
 	return ret;
@@ -343,12 +368,12 @@ __FORTIFY_INLINE char *strncat(char *p, const char *q, __kernel_size_t count)
 	size_t p_size = __builtin_object_size(p, 0);
 	size_t q_size = __builtin_object_size(q, 0);
 	if (p_size == (size_t)-1 && q_size == (size_t)-1)
-		return __builtin_strncat(p, q, count);
+		return __underlying_strncat(p, q, count);
 	p_len = strlen(p);
 	copy_len = strnlen(q, count);
 	if (p_size < p_len + copy_len + 1)
 		fortify_panic(__func__);
-	__builtin_memcpy(p + p_len, q, copy_len);
+	__underlying_memcpy(p + p_len, q, copy_len);
 	p[p_len + copy_len] = '\0';
 	return p;
 }
@@ -360,7 +385,7 @@ __FORTIFY_INLINE void *memset(void *p, int c, __kernel_size_t size)
 		__write_overflow();
 	if (p_size < size)
 		fortify_panic(__func__);
-	return __builtin_memset(p, c, size);
+	return __underlying_memset(p, c, size);
 }
 
 __FORTIFY_INLINE void *memcpy(void *p, const void *q, __kernel_size_t size)
@@ -375,7 +400,7 @@ __FORTIFY_INLINE void *memcpy(void *p, const void *q, __kernel_size_t size)
 	}
 	if (p_size < size || q_size < size)
 		fortify_panic(__func__);
-	return __builtin_memcpy(p, q, size);
+	return __underlying_memcpy(p, q, size);
 }
 
 __FORTIFY_INLINE void *memmove(void *p, const void *q, __kernel_size_t size)
@@ -390,7 +415,7 @@ __FORTIFY_INLINE void *memmove(void *p, const void *q, __kernel_size_t size)
 	}
 	if (p_size < size || q_size < size)
 		fortify_panic(__func__);
-	return __builtin_memmove(p, q, size);
+	return __underlying_memmove(p, q, size);
 }
 
 extern void *__real_memscan(void *, int, __kernel_size_t) __RENAME(memscan);
@@ -416,7 +441,7 @@ __FORTIFY_INLINE int memcmp(const void *p, const void *q, __kernel_size_t size)
 	}
 	if (p_size < size || q_size < size)
 		fortify_panic(__func__);
-	return __builtin_memcmp(p, q, size);
+	return __underlying_memcmp(p, q, size);
 }
 
 __FORTIFY_INLINE void *memchr(const void *p, int c, __kernel_size_t size)
@@ -426,7 +451,7 @@ __FORTIFY_INLINE void *memchr(const void *p, int c, __kernel_size_t size)
 		__read_overflow();
 	if (p_size < size)
 		fortify_panic(__func__);
-	return __builtin_memchr(p, c, size);
+	return __underlying_memchr(p, c, size);
 }
 
 void *__real_memchr_inv(const void *s, int c, size_t n) __RENAME(memchr_inv);
@@ -457,11 +482,22 @@ __FORTIFY_INLINE char *strcpy(char *p, const char *q)
 	size_t p_size = __builtin_object_size(p, 0);
 	size_t q_size = __builtin_object_size(q, 0);
 	if (p_size == (size_t)-1 && q_size == (size_t)-1)
-		return __builtin_strcpy(p, q);
+		return __underlying_strcpy(p, q);
 	memcpy(p, q, strlen(q) + 1);
 	return p;
 }
 
+/* Don't use these outside the FORITFY_SOURCE implementation */
+#undef __underlying_memchr
+#undef __underlying_memcmp
+#undef __underlying_memcpy
+#undef __underlying_memmove
+#undef __underlying_memset
+#undef __underlying_strcat
+#undef __underlying_strcpy
+#undef __underlying_strlen
+#undef __underlying_strncat
+#undef __underlying_strncpy
 #endif
 
 /**
-- 
2.25.1

[PATCH 5.4 160/261] btrfs: free alien device after device add

[Greg Kroah-Hartman]

From: Anand Jain <anand.jain@oracle.com>

commit 7f551d969037cc128eca60688d9c5a300d84e665 upstream.

When an old device has new fsid through 'btrfs device add -f <dev>' our
fs_devices list has an alien device in one of the fs_devices lists.

By having an alien device in fs_devices, we have two issues so far

1. missing device does not not show as missing in the userland

2. degraded mount will fail

Both issues are caused by the fact that there's an alien device in the
fs_devices list. (Alien means that it does not belong to the filesystem,
identified by fsid, or does not contain btrfs filesystem at all, eg. due
to overwrite).

A device can be scanned/added through the control device ioctls
SCAN_DEV, DEVICES_READY or by ADD_DEV.

And device coming through the control device is checked against the all
other devices in the lists, but this was not the case for ADD_DEV.

This patch fixes both issues above by removing the alien device.

CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/volumes.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -2769,8 +2769,18 @@ int btrfs_init_new_device(struct btrfs_f
 		ret = btrfs_commit_transaction(trans);
 	}
 
-	/* Update ctime/mtime for libblkid */
+	/*
+	 * Now that we have written a new super block to this device, check all
+	 * other fs_devices list if device_path alienates any other scanned
+	 * device.
+	 * We can ignore the return value as it typically returns -EINVAL and
+	 * only succeeds if the device was an alien.
+	 */
+	btrfs_forget_devices(device_path);
+
+	/* Update ctime/mtime for blkid or udev */
 	update_dev_time(device_path);
+
 	return ret;
 
 error_sysfs:

[PATCH 5.4 161/261] btrfs: include non-missing as a qualifier for the latest_bdev

[Greg Kroah-Hartman]

From: Anand Jain <anand.jain@oracle.com>

commit 998a0671961f66e9fad4990ed75f80ba3088c2f1 upstream.

btrfs_free_extra_devids() updates fs_devices::latest_bdev to point to
the bdev with greatest device::generation number.  For a typical-missing
device the generation number is zero so fs_devices::latest_bdev will
never point to it.

But if the missing device is due to alienation [1], then
device::generation is not zero and if it is greater or equal to the rest
of device  generations in the list, then fs_devices::latest_bdev ends up
pointing to the missing device and reports the error like [2].

[1] We maintain devices of a fsid (as in fs_device::fsid) in the
fs_devices::devices list, a device is considered as an alien device
if its fsid does not match with the fs_device::fsid

Consider a working filesystem with raid1:

  $ mkfs.btrfs -f -d raid1 -m raid1 /dev/sda /dev/sdb
  $ mount /dev/sda /mnt-raid1
  $ umount /mnt-raid1

While mnt-raid1 was unmounted the user force-adds one of its devices to
another btrfs filesystem:

  $ mkfs.btrfs -f /dev/sdc
  $ mount /dev/sdc /mnt-single
  $ btrfs dev add -f /dev/sda /mnt-single

Now the original mnt-raid1 fails to mount in degraded mode, because
fs_devices::latest_bdev is pointing to the alien device.

  $ mount -o degraded /dev/sdb /mnt-raid1

[2]
mount: wrong fs type, bad option, bad superblock on /dev/sdb,
       missing codepage or helper program, or other error

       In some cases useful info is found in syslog - try
       dmesg | tail or so.

  kernel: BTRFS warning (device sdb): devid 1 uuid 072a0192-675b-4d5a-8640-a5cf2b2c704d is missing
  kernel: BTRFS error (device sdb): failed to read devices
  kernel: BTRFS error (device sdb): open_ctree failed

Fix the root cause by checking if the device is not missing before it
can be considered for the fs_devices::latest_bdev.

CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/volumes.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -1223,6 +1223,8 @@ again:
 							&device->dev_state)) {
 			if (!test_bit(BTRFS_DEV_STATE_REPLACE_TGT,
 			     &device->dev_state) &&
+			    !test_bit(BTRFS_DEV_STATE_MISSING,
+				      &device->dev_state) &&
 			     (!latest_dev ||
 			      device->generation > latest_dev->generation)) {
 				latest_dev = device;

[PATCH 5.4 162/261] btrfs: send: emit file capabilities after chown

[Greg Kroah-Hartman]

From: Marcos Paulo de Souza <mpdesouza@suse.com>

commit 89efda52e6b6930f80f5adda9c3c9edfb1397191 upstream.

Whenever a chown is executed, all capabilities of the file being touched
are lost.  When doing incremental send with a file with capabilities,
there is a situation where the capability can be lost on the receiving
side. The sequence of actions bellow shows the problem:

  $ mount /dev/sda fs1
  $ mount /dev/sdb fs2

  $ touch fs1/foo.bar
  $ setcap cap_sys_nice+ep fs1/foo.bar
  $ btrfs subvolume snapshot -r fs1 fs1/snap_init
  $ btrfs send fs1/snap_init | btrfs receive fs2

  $ chgrp adm fs1/foo.bar
  $ setcap cap_sys_nice+ep fs1/foo.bar

  $ btrfs subvolume snapshot -r fs1 fs1/snap_complete
  $ btrfs subvolume snapshot -r fs1 fs1/snap_incremental

  $ btrfs send fs1/snap_complete | btrfs receive fs2
  $ btrfs send -p fs1/snap_init fs1/snap_incremental | btrfs receive fs2

At this point, only a chown was emitted by "btrfs send" since only the
group was changed. This makes the cap_sys_nice capability to be dropped
from fs2/snap_incremental/foo.bar

To fix that, only emit capabilities after chown is emitted. The current
code first checks for xattrs that are new/changed, emits them, and later
emit the chown. Now, __process_new_xattr skips capabilities, letting
only finish_inode_if_needed to emit them, if they exist, for the inode
being processed.

This behavior was being worked around in "btrfs receive" side by caching
the capability and only applying it after chown. Now, xattrs are only
emmited _after_ chown, making that workaround not needed anymore.

Link: https://github.com/kdave/btrfs-progs/issues/202
CC: stable@vger.kernel.org # 4.4+
Suggested-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/send.c |   67 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)

--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -23,6 +23,7 @@
 #include "btrfs_inode.h"
 #include "transaction.h"
 #include "compression.h"
+#include "xattr.h"
 
 /*
  * Maximum number of references an extent can have in order for us to attempt to
@@ -4536,6 +4537,10 @@ static int __process_new_xattr(int num,
 	struct fs_path *p;
 	struct posix_acl_xattr_header dummy_acl;
 
+	/* Capabilities are emitted by finish_inode_if_needed */
+	if (!strncmp(name, XATTR_NAME_CAPS, name_len))
+		return 0;
+
 	p = fs_path_alloc();
 	if (!p)
 		return -ENOMEM;
@@ -5098,6 +5103,64 @@ static int send_extent_data(struct send_
 	return 0;
 }
 
+/*
+ * Search for a capability xattr related to sctx->cur_ino. If the capability is
+ * found, call send_set_xattr function to emit it.
+ *
+ * Return 0 if there isn't a capability, or when the capability was emitted
+ * successfully, or < 0 if an error occurred.
+ */
+static int send_capabilities(struct send_ctx *sctx)
+{
+	struct fs_path *fspath = NULL;
+	struct btrfs_path *path;
+	struct btrfs_dir_item *di;
+	struct extent_buffer *leaf;
+	unsigned long data_ptr;
+	char *buf = NULL;
+	int buf_len;
+	int ret = 0;
+
+	path = alloc_path_for_send();
+	if (!path)
+		return -ENOMEM;
+
+	di = btrfs_lookup_xattr(NULL, sctx->send_root, path, sctx->cur_ino,
+				XATTR_NAME_CAPS, strlen(XATTR_NAME_CAPS), 0);
+	if (!di) {
+		/* There is no xattr for this inode */
+		goto out;
+	} else if (IS_ERR(di)) {
+		ret = PTR_ERR(di);
+		goto out;
+	}
+
+	leaf = path->nodes[0];
+	buf_len = btrfs_dir_data_len(leaf, di);
+
+	fspath = fs_path_alloc();
+	buf = kmalloc(buf_len, GFP_KERNEL);
+	if (!fspath || !buf) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = get_cur_path(sctx, sctx->cur_ino, sctx->cur_inode_gen, fspath);
+	if (ret < 0)
+		goto out;
+
+	data_ptr = (unsigned long)(di + 1) + btrfs_dir_name_len(leaf, di);
+	read_extent_buffer(leaf, buf, data_ptr, buf_len);
+
+	ret = send_set_xattr(sctx, fspath, XATTR_NAME_CAPS,
+			strlen(XATTR_NAME_CAPS), buf, buf_len);
+out:
+	kfree(buf);
+	fs_path_free(fspath);
+	btrfs_free_path(path);
+	return ret;
+}
+
 static int clone_range(struct send_ctx *sctx,
 		       struct clone_root *clone_root,
 		       const u64 disk_byte,
@@ -6001,6 +6064,10 @@ static int finish_inode_if_needed(struct
 			goto out;
 	}
 
+	ret = send_capabilities(sctx);
+	if (ret < 0)
+		goto out;
+
 	/*
 	 * If other directory inodes depended on our current directory
 	 * inode's move/rename, now do their move/rename operations.

[PATCH 5.4 163/261] btrfs: force chunk allocation if our global rsv is larger than metadata

[Greg Kroah-Hartman]

From: Josef Bacik <josef@toxicpanda.com>

commit 9c343784c4328781129bcf9e671645f69fe4b38a upstream.

Nikolay noticed a bunch of test failures with my global rsv steal
patches.  At first he thought they were introduced by them, but they've
been failing for a while with 64k nodes.

The problem is with 64k nodes we have a global reserve that calculates
out to 13MiB on a freshly made file system, which only has 8MiB of
metadata space.  Because of changes I previously made we no longer
account for the global reserve in the overcommit logic, which means we
correctly allow overcommit to happen even though we are already
overcommitted.

However in some corner cases, for example btrfs/170, we will allocate
the entire file system up with data chunks before we have enough space
pressure to allocate a metadata chunk.  Then once the fs is full we
ENOSPC out because we cannot overcommit and the global reserve is taking
up all of the available space.

The most ideal way to deal with this is to change our space reservation
stuff to take into account the height of the tree's that we're
modifying, so that our global reserve calculation does not end up so
obscenely large.

However that is a huge undertaking.  Instead fix this by forcing a chunk
allocation if the global reserve is larger than the total metadata
space.  This gives us essentially the same behavior that happened
before, we get a chunk allocated and these tests can pass.

This is meant to be a stop-gap measure until we can tackle the "tree
height only" project.

Fixes: 0096420adb03 ("btrfs: do not account global reserve in can_overcommit")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/block-rsv.c   |    3 +++
 fs/btrfs/transaction.c |   18 ++++++++++++++++++
 2 files changed, 21 insertions(+)

--- a/fs/btrfs/block-rsv.c
+++ b/fs/btrfs/block-rsv.c
@@ -5,6 +5,7 @@
 #include "block-rsv.h"
 #include "space-info.h"
 #include "transaction.h"
+#include "block-group.h"
 
 static u64 block_rsv_release_bytes(struct btrfs_fs_info *fs_info,
 				    struct btrfs_block_rsv *block_rsv,
@@ -313,6 +314,8 @@ void btrfs_update_global_block_rsv(struc
 	else
 		block_rsv->full = 0;
 
+	if (block_rsv->size >= sinfo->total_bytes)
+		sinfo->force_alloc = CHUNK_ALLOC_FORCE;
 	spin_unlock(&block_rsv->lock);
 	spin_unlock(&sinfo->lock);
 }
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -21,6 +21,7 @@
 #include "dev-replace.h"
 #include "qgroup.h"
 #include "block-group.h"
+#include "space-info.h"
 
 #define BTRFS_ROOT_TRANS_TAG 0
 
@@ -451,6 +452,7 @@ start_transaction(struct btrfs_root *roo
 	u64 num_bytes = 0;
 	u64 qgroup_reserved = 0;
 	bool reloc_reserved = false;
+	bool do_chunk_alloc = false;
 	int ret;
 
 	/* Send isn't supposed to start transactions. */
@@ -513,6 +515,9 @@ start_transaction(struct btrfs_root *roo
 							  delayed_refs_bytes);
 			num_bytes -= delayed_refs_bytes;
 		}
+
+		if (rsv->space_info->force_alloc)
+			do_chunk_alloc = true;
 	} else if (num_items == 0 && flush == BTRFS_RESERVE_FLUSH_ALL &&
 		   !delayed_refs_rsv->full) {
 		/*
@@ -595,6 +600,19 @@ got_it:
 		current->journal_info = h;
 
 	/*
+	 * If the space_info is marked ALLOC_FORCE then we'll get upgraded to
+	 * ALLOC_FORCE the first run through, and then we won't allocate for
+	 * anybody else who races in later.  We don't care about the return
+	 * value here.
+	 */
+	if (do_chunk_alloc && num_bytes) {
+		u64 flags = h->block_rsv->space_info->flags;
+
+		btrfs_chunk_alloc(h, btrfs_get_alloc_profile(fs_info, flags),
+				  CHUNK_ALLOC_NO_FORCE);
+	}
+
+	/*
 	 * btrfs_record_root_in_trans() needs to alloc new extents, and may
 	 * call btrfs_join_transaction() while we're also starting a
 	 * transaction.

[PATCH 5.4 164/261] btrfs: fix error handling when submitting direct I/O bio

[Greg Kroah-Hartman]

From: Omar Sandoval <osandov@fb.com>

commit 6d3113a193e3385c72240096fe397618ecab6e43 upstream.

In btrfs_submit_direct_hook(), if a direct I/O write doesn't span a RAID
stripe or chunk, we submit orig_bio without cloning it. In this case, we
don't increment pending_bios. Then, if btrfs_submit_dio_bio() fails, we
decrement pending_bios to -1, and we never complete orig_bio. Fix it by
initializing pending_bios to 1 instead of incrementing later.

Fixing this exposes another bug: we put orig_bio prematurely and then
put it again from end_io. Fix it by not putting orig_bio.

After this change, pending_bios is really more of a reference count, but
I'll leave that cleanup separate to keep the fix small.

Fixes: e65e15355429 ("btrfs: fix panic caused by direct IO")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/inode.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -8534,7 +8534,6 @@ static int btrfs_submit_direct_hook(stru
 
 	/* bio split */
 	ASSERT(geom.len <= INT_MAX);
-	atomic_inc(&dip->pending_bios);
 	do {
 		clone_len = min_t(int, submit_len, geom.len);
 
@@ -8584,7 +8583,8 @@ submit:
 	if (!status)
 		return 0;
 
-	bio_put(bio);
+	if (bio != orig_bio)
+		bio_put(bio);
 out_err:
 	dip->errors = 1;
 	/*
@@ -8625,7 +8625,7 @@ static void btrfs_submit_direct(struct b
 	bio->bi_private = dip;
 	dip->orig_bio = bio;
 	dip->dio_bio = dio_bio;
-	atomic_set(&dip->pending_bios, 0);
+	atomic_set(&dip->pending_bios, 1);
 	io_bio = btrfs_io_bio(bio);
 	io_bio->logical = file_offset;
 

[PATCH 5.4 165/261] btrfs: fix wrong file range cleanup after an error filling dealloc range

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

commit e2c8e92d1140754073ad3799eb6620c76bab2078 upstream.

If an error happens while running dellaloc in COW mode for a range, we can
end up calling extent_clear_unlock_delalloc() for a range that goes beyond
our range's end offset by 1 byte, which affects 1 extra page. This results
in clearing bits and doing page operations (such as a page unlock) outside
our target range.

Fix that by calling extent_clear_unlock_delalloc() with an inclusive end
offset, instead of an exclusive end offset, at cow_file_range().

Fixes: a315e68f6e8b30 ("Btrfs: fix invalid attempt to free reserved space on failure to cow range")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/inode.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -1132,7 +1132,7 @@ out_unlock:
 	 */
 	if (extent_reserved) {
 		extent_clear_unlock_delalloc(inode, start,
-					     start + cur_alloc_size,
+					     start + cur_alloc_size - 1,
 					     locked_page,
 					     clear_bits,
 					     page_ops);

[PATCH 5.4 166/261] btrfs: fix space_info bytes_may_use underflow after nocow buffered write

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

commit 467dc47ea99c56e966e99d09dae54869850abeeb upstream.

When doing a buffered write we always try to reserve data space for it,
even when the file has the NOCOW bit set or the write falls into a file
range covered by a prealloc extent. This is done both because it is
expensive to check if we can do a nocow write (checking if an extent is
shared through reflinks or if there's a hole in the range for example),
and because when writeback starts we might actually need to fallback to
COW mode (for example the block group containing the target extents was
turned into RO mode due to a scrub or balance).

When we are unable to reserve data space we check if we can do a nocow
write, and if we can, we proceed with dirtying the pages and setting up
the range for delalloc. In this case the bytes_may_use counter of the
data space_info object is not incremented, unlike in the case where we
are able to reserve data space (done through btrfs_check_data_free_space()
which calls btrfs_alloc_data_chunk_ondemand()).

Later when running delalloc we attempt to start writeback in nocow mode
but we might revert back to cow mode, for example because in the meanwhile
a block group was turned into RO mode by a scrub or relocation. The cow
path after successfully allocating an extent ends up calling
btrfs_add_reserved_bytes(), which expects the bytes_may_use counter of
the data space_info object to have been incremented before - but we did
not do it when the buffered write started, since there was not enough
available data space. So btrfs_add_reserved_bytes() ends up decrementing
the bytes_may_use counter anyway, and when the counter's current value
is smaller then the size of the allocated extent we get a stack trace
like the following:

 ------------[ cut here ]------------
 WARNING: CPU: 0 PID: 20138 at fs/btrfs/space-info.h:115 btrfs_add_reserved_bytes+0x3d6/0x4e0 [btrfs]
 Modules linked in: btrfs blake2b_generic xor raid6_pq libcrc32c (...)
 CPU: 0 PID: 20138 Comm: kworker/u8:15 Not tainted 5.6.0-rc7-btrfs-next-58 #5
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
 Workqueue: writeback wb_workfn (flush-btrfs-1754)
 RIP: 0010:btrfs_add_reserved_bytes+0x3d6/0x4e0 [btrfs]
 Code: ff ff 48 (...)
 RSP: 0018:ffffbda18a4b3568 EFLAGS: 00010287
 RAX: 0000000000000000 RBX: ffff9ca076f5d800 RCX: 0000000000000000
 RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff9ca068470410
 RBP: fffffffffffff000 R08: 0000000000000001 R09: 0000000000000000
 R10: ffff9ca079d58040 R11: 0000000000000000 R12: ffff9ca068470400
 R13: ffff9ca0408b2000 R14: 0000000000001000 R15: ffff9ca076f5d800
 FS:  0000000000000000(0000) GS:ffff9ca07a600000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00005605dbfe7048 CR3: 0000000138570006 CR4: 00000000003606f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  find_free_extent+0x4a0/0x16c0 [btrfs]
  btrfs_reserve_extent+0x91/0x180 [btrfs]
  cow_file_range+0x12d/0x490 [btrfs]
  run_delalloc_nocow+0x341/0xa40 [btrfs]
  btrfs_run_delalloc_range+0x1ea/0x6d0 [btrfs]
  ? find_lock_delalloc_range+0x221/0x250 [btrfs]
  writepage_delalloc+0xe8/0x150 [btrfs]
  __extent_writepage+0xe8/0x4c0 [btrfs]
  extent_write_cache_pages+0x237/0x530 [btrfs]
  ? btrfs_wq_submit_bio+0x9f/0xc0 [btrfs]
  extent_writepages+0x44/0xa0 [btrfs]
  do_writepages+0x23/0x80
  __writeback_single_inode+0x59/0x700
  writeback_sb_inodes+0x267/0x5f0
  __writeback_inodes_wb+0x87/0xe0
  wb_writeback+0x382/0x590
  ? wb_workfn+0x4a2/0x6c0
  wb_workfn+0x4a2/0x6c0
  process_one_work+0x26d/0x6a0
  worker_thread+0x4f/0x3e0
  ? process_one_work+0x6a0/0x6a0
  kthread+0x103/0x140
  ? kthread_create_worker_on_cpu+0x70/0x70
  ret_from_fork+0x3a/0x50
 irq event stamp: 0
 hardirqs last  enabled at (0): [<0000000000000000>] 0x0
 hardirqs last disabled at (0): [<ffffffff94ebdedf>] copy_process+0x74f/0x2020
 softirqs last  enabled at (0): [<ffffffff94ebdedf>] copy_process+0x74f/0x2020
 softirqs last disabled at (0): [<0000000000000000>] 0x0
 ---[ end trace f9f6ef8ec4cd8ec9 ]---

So to fix this, when falling back into cow mode check if space was not
reserved, by testing for the bit EXTENT_NORESERVE in the respective file
range, and if not, increment the bytes_may_use counter for the data
space_info object. Also clear the EXTENT_NORESERVE bit from the range, so
that if the cow path fails it decrements the bytes_may_use counter when
clearing the delalloc range (through the btrfs_clear_delalloc_extent()
callback).

Fixes: 7ee9e4405f264e ("Btrfs: check if we can nocow if we don't have data space")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/inode.c |   61 ++++++++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 56 insertions(+), 5 deletions(-)

--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -49,6 +49,7 @@
 #include "qgroup.h"
 #include "delalloc-space.h"
 #include "block-group.h"
+#include "space-info.h"
 
 struct btrfs_iget_args {
 	struct btrfs_key *location;
@@ -1322,6 +1323,56 @@ static noinline int csum_exist_in_range(
 	return 1;
 }
 
+static int fallback_to_cow(struct inode *inode, struct page *locked_page,
+			   const u64 start, const u64 end,
+			   int *page_started, unsigned long *nr_written)
+{
+	struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
+	u64 range_start = start;
+	u64 count;
+
+	/*
+	 * If EXTENT_NORESERVE is set it means that when the buffered write was
+	 * made we had not enough available data space and therefore we did not
+	 * reserve data space for it, since we though we could do NOCOW for the
+	 * respective file range (either there is prealloc extent or the inode
+	 * has the NOCOW bit set).
+	 *
+	 * However when we need to fallback to COW mode (because for example the
+	 * block group for the corresponding extent was turned to RO mode by a
+	 * scrub or relocation) we need to do the following:
+	 *
+	 * 1) We increment the bytes_may_use counter of the data space info.
+	 *    If COW succeeds, it allocates a new data extent and after doing
+	 *    that it decrements the space info's bytes_may_use counter and
+	 *    increments its bytes_reserved counter by the same amount (we do
+	 *    this at btrfs_add_reserved_bytes()). So we need to increment the
+	 *    bytes_may_use counter to compensate (when space is reserved at
+	 *    buffered write time, the bytes_may_use counter is incremented);
+	 *
+	 * 2) We clear the EXTENT_NORESERVE bit from the range. We do this so
+	 *    that if the COW path fails for any reason, it decrements (through
+	 *    extent_clear_unlock_delalloc()) the bytes_may_use counter of the
+	 *    data space info, which we incremented in the step above.
+	 */
+	count = count_range_bits(io_tree, &range_start, end, end + 1 - start,
+				 EXTENT_NORESERVE, 0);
+	if (count > 0) {
+		struct btrfs_fs_info *fs_info = BTRFS_I(inode)->root->fs_info;
+		struct btrfs_space_info *sinfo = fs_info->data_sinfo;
+
+		spin_lock(&sinfo->lock);
+		btrfs_space_info_update_bytes_may_use(fs_info, sinfo, count);
+		spin_unlock(&sinfo->lock);
+
+		clear_extent_bit(io_tree, start, end, EXTENT_NORESERVE, 0, 0,
+				 NULL);
+	}
+
+	return cow_file_range(inode, locked_page, start, end, page_started,
+			      nr_written, 1);
+}
+
 /*
  * when nowcow writeback call back.  This checks for snapshots or COW copies
  * of the extents that exist in the file, and COWs the file as required.
@@ -1569,9 +1620,9 @@ out_check:
 		 * NOCOW, following one which needs to be COW'ed
 		 */
 		if (cow_start != (u64)-1) {
-			ret = cow_file_range(inode, locked_page,
-					     cow_start, found_key.offset - 1,
-					     page_started, nr_written, 1);
+			ret = fallback_to_cow(inode, locked_page, cow_start,
+					      found_key.offset - 1,
+					      page_started, nr_written);
 			if (ret) {
 				if (nocow)
 					btrfs_dec_nocow_writers(fs_info,
@@ -1660,8 +1711,8 @@ out_check:
 
 	if (cow_start != (u64)-1) {
 		cur_offset = end;
-		ret = cow_file_range(inode, locked_page, cow_start, end,
-				     page_started, nr_written, 1);
+		ret = fallback_to_cow(inode, locked_page, cow_start, end,
+				      page_started, nr_written);
 		if (ret)
 			goto error;
 	}

[PATCH 5.4 167/261] btrfs: fix space_info bytes_may_use underflow during space cache writeout

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

commit 2166e5edce9ac1edf3b113d6091ef72fcac2d6c4 upstream.

We always preallocate a data extent for writing a free space cache, which
causes writeback to always try the nocow path first, since the free space
inode has the prealloc bit set in its flags.

However if the block group that contains the data extent for the space
cache has been turned to RO mode due to a running scrub or balance for
example, we have to fallback to the cow path. In that case once a new data
extent is allocated we end up calling btrfs_add_reserved_bytes(), which
decrements the counter named bytes_may_use from the data space_info object
with the expection that this counter was previously incremented with the
same amount (the size of the data extent).

However when we started writeout of the space cache at cache_save_setup(),
we incremented the value of the bytes_may_use counter through a call to
btrfs_check_data_free_space() and then decremented it through a call to
btrfs_prealloc_file_range_trans() immediately after. So when starting the
writeback if we fallback to cow mode we have to increment the counter
bytes_may_use of the data space_info again to compensate for the extent
allocation done by the cow path.

When this issue happens we are incorrectly decrementing the bytes_may_use
counter and when its current value is smaller then the amount we try to
subtract we end up with the following warning:

 ------------[ cut here ]------------
 WARNING: CPU: 3 PID: 657 at fs/btrfs/space-info.h:115 btrfs_add_reserved_bytes+0x3d6/0x4e0 [btrfs]
 Modules linked in: btrfs blake2b_generic xor raid6_pq libcrc32c (...)
 CPU: 3 PID: 657 Comm: kworker/u8:7 Tainted: G        W         5.6.0-rc7-btrfs-next-58 #5
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
 Workqueue: writeback wb_workfn (flush-btrfs-1591)
 RIP: 0010:btrfs_add_reserved_bytes+0x3d6/0x4e0 [btrfs]
 Code: ff ff 48 (...)
 RSP: 0000:ffffa41608f13660 EFLAGS: 00010287
 RAX: 0000000000001000 RBX: ffff9615b93ae400 RCX: 0000000000000000
 RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff9615b96ab410
 RBP: fffffffffffee000 R08: 0000000000000001 R09: 0000000000000000
 R10: ffff961585e62a40 R11: 0000000000000000 R12: ffff9615b96ab400
 R13: ffff9615a1a2a000 R14: 0000000000012000 R15: ffff9615b93ae400
 FS:  0000000000000000(0000) GS:ffff9615bb200000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 000055cbbc2ae178 CR3: 0000000115794006 CR4: 00000000003606e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  find_free_extent+0x4a0/0x16c0 [btrfs]
  btrfs_reserve_extent+0x91/0x180 [btrfs]
  cow_file_range+0x12d/0x490 [btrfs]
  btrfs_run_delalloc_range+0x9f/0x6d0 [btrfs]
  ? find_lock_delalloc_range+0x221/0x250 [btrfs]
  writepage_delalloc+0xe8/0x150 [btrfs]
  __extent_writepage+0xe8/0x4c0 [btrfs]
  extent_write_cache_pages+0x237/0x530 [btrfs]
  extent_writepages+0x44/0xa0 [btrfs]
  do_writepages+0x23/0x80
  __writeback_single_inode+0x59/0x700
  writeback_sb_inodes+0x267/0x5f0
  __writeback_inodes_wb+0x87/0xe0
  wb_writeback+0x382/0x590
  ? wb_workfn+0x4a2/0x6c0
  wb_workfn+0x4a2/0x6c0
  process_one_work+0x26d/0x6a0
  worker_thread+0x4f/0x3e0
  ? process_one_work+0x6a0/0x6a0
  kthread+0x103/0x140
  ? kthread_create_worker_on_cpu+0x70/0x70
  ret_from_fork+0x3a/0x50
 irq event stamp: 0
 hardirqs last  enabled at (0): [<0000000000000000>] 0x0
 hardirqs last disabled at (0): [<ffffffffb2abdedf>] copy_process+0x74f/0x2020
 softirqs last  enabled at (0): [<ffffffffb2abdedf>] copy_process+0x74f/0x2020
 softirqs last disabled at (0): [<0000000000000000>] 0x0
 ---[ end trace bd7c03622e0b0a52 ]---
 ------------[ cut here ]------------

So fix this by incrementing the bytes_may_use counter of the data
space_info when we fallback to the cow path. If the cow path is successful
the counter is decremented after extent allocation (by
btrfs_add_reserved_bytes()), if it fails it ends up being decremented as
well when clearing the delalloc range (extent_clear_unlock_delalloc()).

This could be triggered sporadically by the test case btrfs/061 from
fstests.

Fixes: 82d5902d9c681b ("Btrfs: Support reading/writing on disk free ino cache")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/inode.c |   20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -1327,6 +1327,8 @@ static int fallback_to_cow(struct inode
 			   const u64 start, const u64 end,
 			   int *page_started, unsigned long *nr_written)
 {
+	const bool is_space_ino = btrfs_is_free_space_inode(BTRFS_I(inode));
+	const u64 range_bytes = end + 1 - start;
 	struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
 	u64 range_start = start;
 	u64 count;
@@ -1354,19 +1356,27 @@ static int fallback_to_cow(struct inode
 	 *    that if the COW path fails for any reason, it decrements (through
 	 *    extent_clear_unlock_delalloc()) the bytes_may_use counter of the
 	 *    data space info, which we incremented in the step above.
+	 *
+	 * If we need to fallback to cow and the inode corresponds to a free
+	 * space cache inode, we must also increment bytes_may_use of the data
+	 * space_info for the same reason. Space caches always get a prealloc
+	 * extent for them, however scrub or balance may have set the block
+	 * group that contains that extent to RO mode.
 	 */
-	count = count_range_bits(io_tree, &range_start, end, end + 1 - start,
+	count = count_range_bits(io_tree, &range_start, end, range_bytes,
 				 EXTENT_NORESERVE, 0);
-	if (count > 0) {
+	if (count > 0 || is_space_ino) {
+		const u64 bytes = is_space_ino ? range_bytes : count;
 		struct btrfs_fs_info *fs_info = BTRFS_I(inode)->root->fs_info;
 		struct btrfs_space_info *sinfo = fs_info->data_sinfo;
 
 		spin_lock(&sinfo->lock);
-		btrfs_space_info_update_bytes_may_use(fs_info, sinfo, count);
+		btrfs_space_info_update_bytes_may_use(fs_info, sinfo, bytes);
 		spin_unlock(&sinfo->lock);
 
-		clear_extent_bit(io_tree, start, end, EXTENT_NORESERVE, 0, 0,
-				 NULL);
+		if (count > 0)
+			clear_extent_bit(io_tree, start, end, EXTENT_NORESERVE,
+					 0, 0, NULL);
 	}
 
 	return cow_file_range(inode, locked_page, start, end, page_started,

[PATCH 5.4 168/261] powerpc/mm: Fix conditions to perform MMU specific management by blocks on PPC32.

[Greg Kroah-Hartman]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

commit 4e3319c23a66dabfd6c35f4d2633d64d99b68096 upstream.

Setting init mem to NX shall depend on sinittext being mapped by
block, not on stext being mapped by block.

Setting text and rodata to RO shall depend on stext being mapped by
block, not on sinittext being mapped by block.

Fixes: 63b2bc619565 ("powerpc/mm/32s: Use BATs for STRICT_KERNEL_RWX")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7d565fb8f51b18a3d98445a830b2f6548cb2da2a.1589866984.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/mm/pgtable_32.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -207,7 +207,7 @@ void mark_initmem_nx(void)
 	unsigned long numpages = PFN_UP((unsigned long)_einittext) -
 				 PFN_DOWN((unsigned long)_sinittext);
 
-	if (v_block_mapped((unsigned long)_stext + 1))
+	if (v_block_mapped((unsigned long)_sinittext))
 		mmu_mark_initmem_nx();
 	else
 		change_page_attr(page, numpages, PAGE_KERNEL);
@@ -219,7 +219,7 @@ void mark_rodata_ro(void)
 	struct page *page;
 	unsigned long numpages;
 
-	if (v_block_mapped((unsigned long)_sinittext)) {
+	if (v_block_mapped((unsigned long)_stext + 1)) {
 		mmu_mark_rodata_ro();
 		ptdump_check_wx();
 		return;

[PATCH 5.4 169/261] mm: thp: make the THP mapcount atomic against __split_huge_pmd_locked()

[Greg Kroah-Hartman]

From: Andrea Arcangeli <aarcange@redhat.com>

commit c444eb564fb16645c172d550359cb3d75fe8a040 upstream.

Write protect anon page faults require an accurate mapcount to decide
if to break the COW or not. This is implemented in the THP path with
reuse_swap_page() ->
page_trans_huge_map_swapcount()/page_trans_huge_mapcount().

If the COW triggers while the other processes sharing the page are
under a huge pmd split, to do an accurate reading, we must ensure the
mapcount isn't computed while it's being transferred from the head
page to the tail pages.

reuse_swap_cache() already runs serialized by the page lock, so it's
enough to add the page lock around __split_huge_pmd_locked too, in
order to add the missing serialization.

Note: the commit in "Fixes" is just to facilitate the backporting,
because the code before such commit didn't try to do an accurate THP
mapcount calculation and it instead used the page_count() to decide if
to COW or not. Both the page_count and the pin_count are THP-wide
refcounts, so they're inaccurate if used in
reuse_swap_page(). Reverting such commit (besides the unrelated fix to
the local anon_vma assignment) would have also opened the window for
memory corruption side effects to certain workloads as documented in
such commit header.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Suggested-by: Jann Horn <jannh@google.com>
Reported-by: Jann Horn <jannh@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Fixes: 6d0a07edd17c ("mm: thp: calculate the mapcount correctly for THP pages during WP faults")
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/huge_memory.c |   31 ++++++++++++++++++++++++++++---
 1 file changed, 28 insertions(+), 3 deletions(-)

--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -2301,6 +2301,8 @@ void __split_huge_pmd(struct vm_area_str
 {
 	spinlock_t *ptl;
 	struct mmu_notifier_range range;
+	bool was_locked = false;
+	pmd_t _pmd;
 
 	mmu_notifier_range_init(&range, MMU_NOTIFY_CLEAR, 0, vma, vma->vm_mm,
 				address & HPAGE_PMD_MASK,
@@ -2313,11 +2315,32 @@ void __split_huge_pmd(struct vm_area_str
 	 * pmd against. Otherwise we can end up replacing wrong page.
 	 */
 	VM_BUG_ON(freeze && !page);
-	if (page && page != pmd_page(*pmd))
-	        goto out;
+	if (page) {
+		VM_WARN_ON_ONCE(!PageLocked(page));
+		was_locked = true;
+		if (page != pmd_page(*pmd))
+			goto out;
+	}
 
+repeat:
 	if (pmd_trans_huge(*pmd)) {
-		page = pmd_page(*pmd);
+		if (!page) {
+			page = pmd_page(*pmd);
+			if (unlikely(!trylock_page(page))) {
+				get_page(page);
+				_pmd = *pmd;
+				spin_unlock(ptl);
+				lock_page(page);
+				spin_lock(ptl);
+				if (unlikely(!pmd_same(*pmd, _pmd))) {
+					unlock_page(page);
+					put_page(page);
+					page = NULL;
+					goto repeat;
+				}
+				put_page(page);
+			}
+		}
 		if (PageMlocked(page))
 			clear_page_mlock(page);
 	} else if (!(pmd_devmap(*pmd) || is_pmd_migration_entry(*pmd)))
@@ -2325,6 +2348,8 @@ void __split_huge_pmd(struct vm_area_str
 	__split_huge_pmd_locked(vma, pmd, range.start, freeze);
 out:
 	spin_unlock(ptl);
+	if (!was_locked && page)
+		unlock_page(page);
 	/*
 	 * No need to double call mmu_notifier->invalidate_range() callback.
 	 * They are 3 cases to consider inside __split_huge_pmd_locked():

[PATCH 5.4 170/261] mm: initialize deferred pages with interrupts enabled

[Greg Kroah-Hartman]

From: Pavel Tatashin <pasha.tatashin@soleen.com>

commit 3d060856adfc59afb9d029c233141334cfaba418 upstream.

Initializing struct pages is a long task and keeping interrupts disabled
for the duration of this operation introduces a number of problems.

1. jiffies are not updated for long period of time, and thus incorrect time
   is reported. See proposed solution and discussion here:
   lkml/20200311123848.118638-1-shile.zhang@linux.alibaba.com
2. It prevents farther improving deferred page initialization by allowing
   intra-node multi-threading.

We are keeping interrupts disabled to solve a rather theoretical problem
that was never observed in real world (See 3a2d7fa8a3d5).

Let's keep interrupts enabled. In case we ever encounter a scenario where
an interrupt thread wants to allocate large amount of memory this early in
boot we can deal with that by growing zone (see deferred_grow_zone()) by
the needed amount before starting deferred_init_memmap() threads.

Before:
[    1.232459] node 0 initialised, 12058412 pages in 1ms

After:
[    1.632580] node 0 initialised, 12051227 pages in 436ms

Fixes: 3a2d7fa8a3d5 ("mm: disable interrupts while initializing deferred pages")
Reported-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Yiqian Wei <yiwei@redhat.com>
Cc: <stable@vger.kernel.org>	[4.17+]
Link: http://lkml.kernel.org/r/20200403140952.17177-3-pasha.tatashin@soleen.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/mmzone.h |    2 ++
 mm/page_alloc.c        |   20 +++++++-------------
 2 files changed, 9 insertions(+), 13 deletions(-)

--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -709,6 +709,8 @@ typedef struct pglist_data {
 	/*
 	 * Must be held any time you expect node_start_pfn,
 	 * node_present_pages, node_spanned_pages or nr_zones to stay constant.
+	 * Also synchronizes pgdat->first_deferred_pfn during deferred page
+	 * init.
 	 *
 	 * pgdat_resize_lock() and pgdat_resize_unlock() are provided to
 	 * manipulate node_size_lock without checking for CONFIG_MEMORY_HOTPLUG
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1793,6 +1793,13 @@ static int __init deferred_init_memmap(v
 	BUG_ON(pgdat->first_deferred_pfn > pgdat_end_pfn(pgdat));
 	pgdat->first_deferred_pfn = ULONG_MAX;
 
+	/*
+	 * Once we unlock here, the zone cannot be grown anymore, thus if an
+	 * interrupt thread must allocate this early in boot, zone must be
+	 * pre-grown prior to start of deferred page initialization.
+	 */
+	pgdat_resize_unlock(pgdat, &flags);
+
 	/* Only the highest zone is deferred so find it */
 	for (zid = 0; zid < MAX_NR_ZONES; zid++) {
 		zone = pgdat->node_zones + zid;
@@ -1813,8 +1820,6 @@ static int __init deferred_init_memmap(v
 	while (spfn < epfn)
 		nr_pages += deferred_init_maxorder(&i, zone, &spfn, &epfn);
 zone_empty:
-	pgdat_resize_unlock(pgdat, &flags);
-
 	/* Sanity check that the next zone really is unpopulated */
 	WARN_ON(++zid < MAX_NR_ZONES && populated_zone(++zone));
 
@@ -1857,17 +1862,6 @@ deferred_grow_zone(struct zone *zone, un
 	pgdat_resize_lock(pgdat, &flags);
 
 	/*
-	 * If deferred pages have been initialized while we were waiting for
-	 * the lock, return true, as the zone was grown.  The caller will retry
-	 * this zone.  We won't return to this function since the caller also
-	 * has this static branch.
-	 */
-	if (!static_branch_unlikely(&deferred_pages)) {
-		pgdat_resize_unlock(pgdat, &flags);
-		return true;
-	}
-
-	/*
 	 * If someone grew this zone while we were waiting for spinlock, return
 	 * true, as there might be enough pages already.
 	 */

[PATCH 5.4 171/261] MIPS: CPU_LOONGSON2EF need software to maintain cache consistency

[Greg Kroah-Hartman]

From: Lichao Liu <liulichao@loongson.cn>

commit a202bf71f08b3ef15356db30535e30b03cf23aec upstream.

CPU_LOONGSON2EF need software to maintain cache consistency,
so modify the 'cpu_needs_post_dma_flush' function to return true
when the cpu type is CPU_LOONGSON2EF.

Cc: stable@vger.kernel.org
Signed-off-by: Lichao Liu <liulichao@loongson.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/mm/dma-noncoherent.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/mips/mm/dma-noncoherent.c
+++ b/arch/mips/mm/dma-noncoherent.c
@@ -33,6 +33,7 @@ static inline bool cpu_needs_post_dma_fl
 	case CPU_R10000:
 	case CPU_R12000:
 	case CPU_BMIPS5000:
+	case CPU_LOONGSON2EF:
 		return true;
 	default:
 		/*

[PATCH 5.4 172/261] mm/pagealloc.c: call touch_nmi_watchdog() on max order boundaries in deferred init

[Greg Kroah-Hartman]

From: Daniel Jordan <daniel.m.jordan@oracle.com>

commit 117003c32771df617acf66e140fbdbdeb0ac71f5 upstream.

Patch series "initialize deferred pages with interrupts enabled", v4.

Keep interrupts enabled during deferred page initialization in order to
make code more modular and allow jiffies to update.

Original approach, and discussion can be found here:
 http://lkml.kernel.org/r/20200311123848.118638-1-shile.zhang@linux.alibaba.com

This patch (of 3):

deferred_init_memmap() disables interrupts the entire time, so it calls
touch_nmi_watchdog() periodically to avoid soft lockup splats.  Soon it
will run with interrupts enabled, at which point cond_resched() should be
used instead.

deferred_grow_zone() makes the same watchdog calls through code shared
with deferred init but will continue to run with interrupts disabled, so
it can't call cond_resched().

Pull the watchdog calls up to these two places to allow the first to be
changed later, independently of the second.  The frequency reduces from
twice per pageblock (init and free) to once per max order block.

Fixes: 3a2d7fa8a3d5 ("mm: disable interrupts while initializing deferred pages")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: James Morris <jmorris@namei.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Yiqian Wei <yiwei@redhat.com>
Cc: <stable@vger.kernel.org>	[4.17+]
Link: http://lkml.kernel.org/r/20200403140952.17177-2-pasha.tatashin@soleen.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/page_alloc.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1640,7 +1640,6 @@ static void __init deferred_free_pages(u
 		} else if (!(pfn & nr_pgmask)) {
 			deferred_free_range(pfn - nr_free, nr_free);
 			nr_free = 1;
-			touch_nmi_watchdog();
 		} else {
 			nr_free++;
 		}
@@ -1670,7 +1669,6 @@ static unsigned long  __init deferred_in
 			continue;
 		} else if (!page || !(pfn & nr_pgmask)) {
 			page = pfn_to_page(pfn);
-			touch_nmi_watchdog();
 		} else {
 			page++;
 		}
@@ -1817,8 +1815,10 @@ static int __init deferred_init_memmap(v
 	 * that we can avoid introducing any issues with the buddy
 	 * allocator.
 	 */
-	while (spfn < epfn)
+	while (spfn < epfn) {
 		nr_pages += deferred_init_maxorder(&i, zone, &spfn, &epfn);
+		touch_nmi_watchdog();
+	}
 zone_empty:
 	/* Sanity check that the next zone really is unpopulated */
 	WARN_ON(++zid < MAX_NR_ZONES && populated_zone(++zone));
@@ -1889,6 +1889,7 @@ deferred_grow_zone(struct zone *zone, un
 		first_deferred_pfn = spfn;
 
 		nr_pages += deferred_init_maxorder(&i, zone, &spfn, &epfn);
+		touch_nmi_watchdog();
 
 		/* We should only stop along section boundaries */
 		if ((first_deferred_pfn ^ spfn) < PAGES_PER_SECTION)

[PATCH 5.4 173/261] mm: call cond_resched() from deferred_init_memmap()

[Greg Kroah-Hartman]

From: Pavel Tatashin <pasha.tatashin@soleen.com>

commit da97f2d56bbd880b4138916a7ef96f9881a551b2 upstream.

Now that deferred pages are initialized with interrupts enabled we can
replace touch_nmi_watchdog() with cond_resched(), as it was before
3a2d7fa8a3d5.

For now, we cannot do the same in deferred_grow_zone() as it is still
initializes pages with interrupts disabled.

This change fixes RCU problem described in
https://lkml.kernel.org/r/20200401104156.11564-2-david@redhat.com

[   60.474005] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[   60.475000] rcu:  1-...0: (0 ticks this GP) idle=02a/1/0x4000000000000000 softirq=1/1 fqs=15000
[   60.475000] rcu:  (detected by 0, t=60002 jiffies, g=-1199, q=1)
[   60.475000] Sending NMI from CPU 0 to CPUs 1:
[    1.760091] NMI backtrace for cpu 1
[    1.760091] CPU: 1 PID: 20 Comm: pgdatinit0 Not tainted 4.18.0-147.9.1.el8_1.x86_64 #1
[    1.760091] Hardware name: Red Hat KVM, BIOS 1.13.0-1.module+el8.2.0+5520+4e5817f3 04/01/2014
[    1.760091] RIP: 0010:__init_single_page.isra.65+0x10/0x4f
[    1.760091] Code: 48 83 cf 63 48 89 f8 0f 1f 40 00 48 89 c6 48 89 d7 e8 6b 18 80 ff 66 90 5b c3 31 c0 b9 10 00 00 00 49 89 f8 48 c1 e6 33 f3 ab <b8> 07 00 00 00 48 c1 e2 36 41 c7 40 34 01 00 00 00 48 c1 e0 33 41
[    1.760091] RSP: 0000:ffffba783123be40 EFLAGS: 00000006
[    1.760091] RAX: 0000000000000000 RBX: fffffad34405e300 RCX: 0000000000000000
[    1.760091] RDX: 0000000000000000 RSI: 0010000000000000 RDI: fffffad34405e340
[    1.760091] RBP: 0000000033f3177e R08: fffffad34405e300 R09: 0000000000000002
[    1.760091] R10: 000000000000002b R11: ffff98afb691a500 R12: 0000000000000002
[    1.760091] R13: 0000000000000000 R14: 000000003f03ea00 R15: 000000003e10178c
[    1.760091] FS:  0000000000000000(0000) GS:ffff9c9ebeb00000(0000) knlGS:0000000000000000
[    1.760091] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    1.760091] CR2: 00000000ffffffff CR3: 000000a1cf20a001 CR4: 00000000003606e0
[    1.760091] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    1.760091] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    1.760091] Call Trace:
[    1.760091]  deferred_init_pages+0x8f/0xbf
[    1.760091]  deferred_init_memmap+0x184/0x29d
[    1.760091]  ? deferred_free_pages.isra.97+0xba/0xba
[    1.760091]  kthread+0x112/0x130
[    1.760091]  ? kthread_flush_work_fn+0x10/0x10
[    1.760091]  ret_from_fork+0x35/0x40
[   89.123011] node 0 initialised, 1055935372 pages in 88650ms

Fixes: 3a2d7fa8a3d5 ("mm: disable interrupts while initializing deferred pages")
Reported-by: Yiqian Wei <yiwei@redhat.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>	[4.17+]
Link: http://lkml.kernel.org/r/20200403140952.17177-4-pasha.tatashin@soleen.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/page_alloc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1817,7 +1817,7 @@ static int __init deferred_init_memmap(v
 	 */
 	while (spfn < epfn) {
 		nr_pages += deferred_init_maxorder(&i, zone, &spfn, &epfn);
-		touch_nmi_watchdog();
+		cond_resched();
 	}
 zone_empty:
 	/* Sanity check that the next zone really is unpopulated */

[PATCH 5.4 174/261] ima: Fix ima digest hash table key calculation

[Greg Kroah-Hartman]

From: Krzysztof Struczynski <krzysztof.struczynski@huawei.com>

commit 1129d31b55d509f15e72dc68e4b5c3a4d7b4da8d upstream.

Function hash_long() accepts unsigned long, while currently only one byte
is passed from ima_hash_key(), which calculates a key for ima_htable.

Given that hashing the digest does not give clear benefits compared to
using the digest itself, remove hash_long() and return the modulus
calculated on the first two bytes of the digest with the number of slots.
Also reduce the depth of the hash table by doubling the number of slots.

Cc: stable@vger.kernel.org
Fixes: 3323eec921ef ("integrity: IMA as an integrity service provider")
Co-developed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com>
Acked-by: David.Laight@aculab.com (big endian system concerns)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/integrity/ima/ima.h |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/security/integrity/ima/ima.h
+++ b/security/integrity/ima/ima.h
@@ -36,7 +36,7 @@ enum tpm_pcrs { TPM_PCR0 = 0, TPM_PCR8 =
 #define IMA_DIGEST_SIZE		SHA1_DIGEST_SIZE
 #define IMA_EVENT_NAME_LEN_MAX	255
 
-#define IMA_HASH_BITS 9
+#define IMA_HASH_BITS 10
 #define IMA_MEASURE_HTABLE_SIZE (1 << IMA_HASH_BITS)
 
 #define IMA_TEMPLATE_FIELD_ID_MAX_LEN	16
@@ -175,9 +175,10 @@ struct ima_h_table {
 };
 extern struct ima_h_table ima_htable;
 
-static inline unsigned long ima_hash_key(u8 *digest)
+static inline unsigned int ima_hash_key(u8 *digest)
 {
-	return hash_long(*digest, IMA_HASH_BITS);
+	/* there is no point in taking a hash of part of a digest */
+	return (digest[0] | digest[1] << 8) % IMA_MEASURE_HTABLE_SIZE;
 }
 
 #define __ima_hooks(hook)		\

[PATCH 5.4 175/261] ima: Switch to ima_hash_algo for boot aggregate

[Greg Kroah-Hartman]

From: Roberto Sassu <roberto.sassu@huawei.com>

commit 6f1a1d103b48b1533a9c804e7a069e2c8e937ce7 upstream.

boot_aggregate is the first entry of IMA measurement list. Its purpose is
to link pre-boot measurements to IMA measurements. As IMA was designed to
work with a TPM 1.2, the SHA1 PCR bank was always selected even if a
TPM 2.0 with support for stronger hash algorithms is available.

This patch first tries to find a PCR bank with the IMA default hash
algorithm. If it does not find it, it selects the SHA256 PCR bank for
TPM 2.0 and SHA1 for TPM 1.2. Ultimately, it selects SHA1 also for TPM 2.0
if the SHA256 PCR bank is not found.

If none of the PCR banks above can be found, boot_aggregate file digest is
filled with zeros, as for TPM bypass, making it impossible to perform a
remote attestation of the system.

Cc: stable@vger.kernel.org # 5.1.x
Fixes: 879b589210a9 ("tpm: retrieve digest size of unknown algorithms with PCR read")
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Suggested-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/integrity/ima/ima_crypto.c |   47 +++++++++++++++++++++++++++++++-----
 security/integrity/ima/ima_init.c   |   20 ++++++++++++---
 2 files changed, 57 insertions(+), 10 deletions(-)

--- a/security/integrity/ima/ima_crypto.c
+++ b/security/integrity/ima/ima_crypto.c
@@ -655,18 +655,29 @@ static void __init ima_pcrread(u32 idx,
 }
 
 /*
- * Calculate the boot aggregate hash
+ * The boot_aggregate is a cumulative hash over TPM registers 0 - 7.  With
+ * TPM 1.2 the boot_aggregate was based on reading the SHA1 PCRs, but with
+ * TPM 2.0 hash agility, TPM chips could support multiple TPM PCR banks,
+ * allowing firmware to configure and enable different banks.
+ *
+ * Knowing which TPM bank is read to calculate the boot_aggregate digest
+ * needs to be conveyed to a verifier.  For this reason, use the same
+ * hash algorithm for reading the TPM PCRs as for calculating the boot
+ * aggregate digest as stored in the measurement list.
  */
-static int __init ima_calc_boot_aggregate_tfm(char *digest,
+static int __init ima_calc_boot_aggregate_tfm(char *digest, u16 alg_id,
 					      struct crypto_shash *tfm)
 {
-	struct tpm_digest d = { .alg_id = TPM_ALG_SHA1, .digest = {0} };
+	struct tpm_digest d = { .alg_id = alg_id, .digest = {0} };
 	int rc;
 	u32 i;
 	SHASH_DESC_ON_STACK(shash, tfm);
 
 	shash->tfm = tfm;
 
+	pr_devel("calculating the boot-aggregate based on TPM bank: %04x\n",
+		 d.alg_id);
+
 	rc = crypto_shash_init(shash);
 	if (rc != 0)
 		return rc;
@@ -675,7 +686,8 @@ static int __init ima_calc_boot_aggregat
 	for (i = TPM_PCR0; i < TPM_PCR8; i++) {
 		ima_pcrread(i, &d);
 		/* now accumulate with current aggregate */
-		rc = crypto_shash_update(shash, d.digest, TPM_DIGEST_SIZE);
+		rc = crypto_shash_update(shash, d.digest,
+					 crypto_shash_digestsize(tfm));
 	}
 	if (!rc)
 		crypto_shash_final(shash, digest);
@@ -685,14 +697,37 @@ static int __init ima_calc_boot_aggregat
 int __init ima_calc_boot_aggregate(struct ima_digest_data *hash)
 {
 	struct crypto_shash *tfm;
-	int rc;
+	u16 crypto_id, alg_id;
+	int rc, i, bank_idx = -1;
+
+	for (i = 0; i < ima_tpm_chip->nr_allocated_banks; i++) {
+		crypto_id = ima_tpm_chip->allocated_banks[i].crypto_id;
+		if (crypto_id == hash->algo) {
+			bank_idx = i;
+			break;
+		}
+
+		if (crypto_id == HASH_ALGO_SHA256)
+			bank_idx = i;
+
+		if (bank_idx == -1 && crypto_id == HASH_ALGO_SHA1)
+			bank_idx = i;
+	}
+
+	if (bank_idx == -1) {
+		pr_err("No suitable TPM algorithm for boot aggregate\n");
+		return 0;
+	}
+
+	hash->algo = ima_tpm_chip->allocated_banks[bank_idx].crypto_id;
 
 	tfm = ima_alloc_tfm(hash->algo);
 	if (IS_ERR(tfm))
 		return PTR_ERR(tfm);
 
 	hash->length = crypto_shash_digestsize(tfm);
-	rc = ima_calc_boot_aggregate_tfm(hash->digest, tfm);
+	alg_id = ima_tpm_chip->allocated_banks[bank_idx].alg_id;
+	rc = ima_calc_boot_aggregate_tfm(hash->digest, alg_id, tfm);
 
 	ima_free_tfm(tfm);
 
--- a/security/integrity/ima/ima_init.c
+++ b/security/integrity/ima/ima_init.c
@@ -27,7 +27,7 @@ struct tpm_chip *ima_tpm_chip;
 /* Add the boot aggregate to the IMA measurement list and extend
  * the PCR register.
  *
- * Calculate the boot aggregate, a SHA1 over tpm registers 0-7,
+ * Calculate the boot aggregate, a hash over tpm registers 0-7,
  * assuming a TPM chip exists, and zeroes if the TPM chip does not
  * exist.  Add the boot aggregate measurement to the measurement
  * list and extend the PCR register.
@@ -51,15 +51,27 @@ static int __init ima_add_boot_aggregate
 	int violation = 0;
 	struct {
 		struct ima_digest_data hdr;
-		char digest[TPM_DIGEST_SIZE];
+		char digest[TPM_MAX_DIGEST_SIZE];
 	} hash;
 
 	memset(iint, 0, sizeof(*iint));
 	memset(&hash, 0, sizeof(hash));
 	iint->ima_hash = &hash.hdr;
-	iint->ima_hash->algo = HASH_ALGO_SHA1;
-	iint->ima_hash->length = SHA1_DIGEST_SIZE;
+	iint->ima_hash->algo = ima_hash_algo;
+	iint->ima_hash->length = hash_digest_size[ima_hash_algo];
 
+	/*
+	 * With TPM 2.0 hash agility, TPM chips could support multiple TPM
+	 * PCR banks, allowing firmware to configure and enable different
+	 * banks.  The SHA1 bank is not necessarily enabled.
+	 *
+	 * Use the same hash algorithm for reading the TPM PCRs as for
+	 * calculating the boot aggregate digest.  Preference is given to
+	 * the configured IMA default hash algorithm.  Otherwise, use the
+	 * TCG required banks - SHA256 for TPM 2.0, SHA1 for TPM 1.2.
+	 * Ultimately select SHA1 also for TPM 2.0 if the SHA256 PCR bank
+	 * is not found.
+	 */
 	if (ima_tpm_chip) {
 		result = ima_calc_boot_aggregate(&hash.hdr);
 		if (result < 0) {

[PATCH 5.4 176/261] ima: Evaluate error in init_ima()

[Greg Kroah-Hartman]

From: Roberto Sassu <roberto.sassu@huawei.com>

commit e144d6b265415ddbdc54b3f17f4f95133effa5a8 upstream.

Evaluate error in init_ima() before register_blocking_lsm_notifier() and
return if not zero.

Cc: stable@vger.kernel.org # 5.3.x
Fixes: b16942455193 ("ima: use the lsm policy update notifier")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/integrity/ima/ima_main.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/security/integrity/ima/ima_main.c
+++ b/security/integrity/ima/ima_main.c
@@ -712,6 +712,9 @@ static int __init init_ima(void)
 		error = ima_init();
 	}
 
+	if (error)
+		return error;
+
 	error = register_blocking_lsm_notifier(&ima_lsm_policy_notifier);
 	if (error)
 		pr_warn("Couldn't register LSM notifier, error %d\n", error);

[PATCH 5.4 177/261] ima: Directly assign the ima_default_policy pointer to ima_rules

[Greg Kroah-Hartman]

From: Roberto Sassu <roberto.sassu@huawei.com>

commit 067a436b1b0aafa593344fddd711a755a58afb3b upstream.

This patch prevents the following oops:

[   10.771813] BUG: kernel NULL pointer dereference, address: 0000000000000
[...]
[   10.779790] RIP: 0010:ima_match_policy+0xf7/0xb80
[...]
[   10.798576] Call Trace:
[   10.798993]  ? ima_lsm_policy_change+0x2b0/0x2b0
[   10.799753]  ? inode_init_owner+0x1a0/0x1a0
[   10.800484]  ? _raw_spin_lock+0x7a/0xd0
[   10.801592]  ima_must_appraise.part.0+0xb6/0xf0
[   10.802313]  ? ima_fix_xattr.isra.0+0xd0/0xd0
[   10.803167]  ima_must_appraise+0x4f/0x70
[   10.804004]  ima_post_path_mknod+0x2e/0x80
[   10.804800]  do_mknodat+0x396/0x3c0

It occurs when there is a failure during IMA initialization, and
ima_init_policy() is not called. IMA hooks still call ima_match_policy()
but ima_rules is NULL. This patch prevents the crash by directly assigning
the ima_default_policy pointer to ima_rules when ima_rules is defined. This
wouldn't alter the existing behavior, as ima_rules is always set at the end
of ima_init_policy().

Cc: stable@vger.kernel.org # 3.7.x
Fixes: 07f6a79415d7d ("ima: add appraise action keywords and default rules")
Reported-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/integrity/ima/ima_policy.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/security/integrity/ima/ima_policy.c
+++ b/security/integrity/ima/ima_policy.c
@@ -204,7 +204,7 @@ static struct ima_rule_entry *arch_polic
 static LIST_HEAD(ima_default_rules);
 static LIST_HEAD(ima_policy_rules);
 static LIST_HEAD(ima_temp_rules);
-static struct list_head *ima_rules;
+static struct list_head *ima_rules = &ima_default_rules;
 
 static int ima_policy __initdata;
 
@@ -712,7 +712,6 @@ void __init ima_init_policy(void)
 			  ARRAY_SIZE(default_appraise_rules),
 			  IMA_DEFAULT_POLICY);
 
-	ima_rules = &ima_default_rules;
 	ima_update_policy_flag();
 }
 

[PATCH 5.4 178/261] ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()

[Greg Kroah-Hartman]

From: Roberto Sassu <roberto.sassu@huawei.com>

commit 6cc7c266e5b47d3cd2b5bb7fd3aac4e6bb2dd1d2 upstream.

If the template field 'd' is chosen and the digest to be added to the
measurement entry was not calculated with SHA1 or MD5, it is
recalculated with SHA1, by using the passed file descriptor. However, this
cannot be done for boot_aggregate, because there is no file descriptor.

This patch adds a call to ima_calc_boot_aggregate() in
ima_eventdigest_init(), so that the digest can be recalculated also for the
boot_aggregate entry.

Cc: stable@vger.kernel.org # 3.13.x
Fixes: 3ce1217d6cd5d ("ima: define template fields library and new helpers")
Reported-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/integrity/ima/ima.h              |    3 ++-
 security/integrity/ima/ima_crypto.c       |    6 +++---
 security/integrity/ima/ima_init.c         |    2 +-
 security/integrity/ima/ima_template_lib.c |   18 ++++++++++++++++++
 4 files changed, 24 insertions(+), 5 deletions(-)

--- a/security/integrity/ima/ima.h
+++ b/security/integrity/ima/ima.h
@@ -52,6 +52,7 @@ extern int ima_policy_flag;
 extern int ima_hash_algo;
 extern int ima_appraise;
 extern struct tpm_chip *ima_tpm_chip;
+extern const char boot_aggregate_name[];
 
 /* IMA event related data */
 struct ima_event_data {
@@ -140,7 +141,7 @@ int ima_calc_buffer_hash(const void *buf
 int ima_calc_field_array_hash(struct ima_field_data *field_data,
 			      struct ima_template_desc *desc, int num_fields,
 			      struct ima_digest_data *hash);
-int __init ima_calc_boot_aggregate(struct ima_digest_data *hash);
+int ima_calc_boot_aggregate(struct ima_digest_data *hash);
 void ima_add_violation(struct file *file, const unsigned char *filename,
 		       struct integrity_iint_cache *iint,
 		       const char *op, const char *cause);
--- a/security/integrity/ima/ima_crypto.c
+++ b/security/integrity/ima/ima_crypto.c
@@ -665,8 +665,8 @@ static void __init ima_pcrread(u32 idx,
  * hash algorithm for reading the TPM PCRs as for calculating the boot
  * aggregate digest as stored in the measurement list.
  */
-static int __init ima_calc_boot_aggregate_tfm(char *digest, u16 alg_id,
-					      struct crypto_shash *tfm)
+static int ima_calc_boot_aggregate_tfm(char *digest, u16 alg_id,
+				       struct crypto_shash *tfm)
 {
 	struct tpm_digest d = { .alg_id = alg_id, .digest = {0} };
 	int rc;
@@ -694,7 +694,7 @@ static int __init ima_calc_boot_aggregat
 	return rc;
 }
 
-int __init ima_calc_boot_aggregate(struct ima_digest_data *hash)
+int ima_calc_boot_aggregate(struct ima_digest_data *hash)
 {
 	struct crypto_shash *tfm;
 	u16 crypto_id, alg_id;
--- a/security/integrity/ima/ima_init.c
+++ b/security/integrity/ima/ima_init.c
@@ -21,7 +21,7 @@
 #include "ima.h"
 
 /* name for boot aggregate entry */
-static const char boot_aggregate_name[] = "boot_aggregate";
+const char boot_aggregate_name[] = "boot_aggregate";
 struct tpm_chip *ima_tpm_chip;
 
 /* Add the boot aggregate to the IMA measurement list and extend
--- a/security/integrity/ima/ima_template_lib.c
+++ b/security/integrity/ima/ima_template_lib.c
@@ -288,6 +288,24 @@ int ima_eventdigest_init(struct ima_even
 		goto out;
 	}
 
+	if ((const char *)event_data->filename == boot_aggregate_name) {
+		if (ima_tpm_chip) {
+			hash.hdr.algo = HASH_ALGO_SHA1;
+			result = ima_calc_boot_aggregate(&hash.hdr);
+
+			/* algo can change depending on available PCR banks */
+			if (!result && hash.hdr.algo != HASH_ALGO_SHA1)
+				result = -EINVAL;
+
+			if (result < 0)
+				memset(&hash, 0, sizeof(hash));
+		}
+
+		cur_digest = hash.hdr.digest;
+		cur_digestsize = hash_digest_size[HASH_ALGO_SHA1];
+		goto out;
+	}
+
 	if (!event_data->file)	/* missing info to re-calculate the digest */
 		return -EINVAL;
 

[PATCH 5.4 179/261] ima: Remove __init annotation from ima_pcrread()

[Greg Kroah-Hartman]

From: Roberto Sassu <roberto.sassu@huawei.com>

commit 8b8c704d913b0fe490af370631a4200e26334ec0 upstream.

Commit 6cc7c266e5b4 ("ima: Call ima_calc_boot_aggregate() in
ima_eventdigest_init()") added a call to ima_calc_boot_aggregate() so that
the digest can be recalculated for the boot_aggregate measurement entry if
the 'd' template field has been requested. For the 'd' field, only SHA1 and
MD5 digests are accepted.

Given that ima_eventdigest_init() does not have the __init annotation, all
functions called should not have it. This patch removes __init from
ima_pcrread().

Cc: stable@vger.kernel.org
Fixes:  6cc7c266e5b4 ("ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/integrity/ima/ima_crypto.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/security/integrity/ima/ima_crypto.c
+++ b/security/integrity/ima/ima_crypto.c
@@ -645,7 +645,7 @@ int ima_calc_buffer_hash(const void *buf
 	return calc_buffer_shash(buf, len, hash);
 }
 
-static void __init ima_pcrread(u32 idx, struct tpm_digest *d)
+static void ima_pcrread(u32 idx, struct tpm_digest *d)
 {
 	if (!ima_tpm_chip)
 		return;

[PATCH 5.4 180/261] evm: Fix possible memory leak in evm_calc_hmac_or_hash()

[Greg Kroah-Hartman]

From: Roberto Sassu <roberto.sassu@huawei.com>

commit 0c4395fb2aa77341269ea619c5419ea48171883f upstream.

Don't immediately return if the signature is portable and security.ima is
not present. Just set error so that memory allocated is freed before
returning from evm_calc_hmac_or_hash().

Fixes: 50b977481fce9 ("EVM: Add support for portable signature format")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/integrity/evm/evm_crypto.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/security/integrity/evm/evm_crypto.c
+++ b/security/integrity/evm/evm_crypto.c
@@ -243,7 +243,7 @@ static int evm_calc_hmac_or_hash(struct
 
 	/* Portable EVM signatures must include an IMA hash */
 	if (type == EVM_XATTR_PORTABLE_DIGSIG && !ima_present)
-		return -EPERM;
+		error = -EPERM;
 out:
 	kfree(xattr_value);
 	kfree(desc);

[PATCH 5.4 181/261] ext4: fix EXT_MAX_EXTENT/INDEX to check for zeroed eh_max

[Greg Kroah-Hartman]

From: Harshad Shirwadkar <harshadshirwadkar@gmail.com>

commit c36a71b4e35ab35340facdd6964a00956b9fef0a upstream.

If eh->eh_max is 0, EXT_MAX_EXTENT/INDEX would evaluate to unsigned
(-1) resulting in illegal memory accesses. Although there is no
consistent repro, we see that generic/019 sometimes crashes because of
this bug.

Ran gce-xfstests smoke and verified that there were no regressions.

Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20200421023959.20879-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/ext4_extents.h |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/fs/ext4/ext4_extents.h
+++ b/fs/ext4/ext4_extents.h
@@ -170,10 +170,13 @@ struct partial_cluster {
 	(EXT_FIRST_EXTENT((__hdr__)) + le16_to_cpu((__hdr__)->eh_entries) - 1)
 #define EXT_LAST_INDEX(__hdr__) \
 	(EXT_FIRST_INDEX((__hdr__)) + le16_to_cpu((__hdr__)->eh_entries) - 1)
-#define EXT_MAX_EXTENT(__hdr__) \
-	(EXT_FIRST_EXTENT((__hdr__)) + le16_to_cpu((__hdr__)->eh_max) - 1)
+#define EXT_MAX_EXTENT(__hdr__)	\
+	((le16_to_cpu((__hdr__)->eh_max)) ? \
+	((EXT_FIRST_EXTENT((__hdr__)) + le16_to_cpu((__hdr__)->eh_max) - 1)) \
+					: 0)
 #define EXT_MAX_INDEX(__hdr__) \
-	(EXT_FIRST_INDEX((__hdr__)) + le16_to_cpu((__hdr__)->eh_max) - 1)
+	((le16_to_cpu((__hdr__)->eh_max)) ? \
+	((EXT_FIRST_INDEX((__hdr__)) + le16_to_cpu((__hdr__)->eh_max) - 1)) : 0)
 
 static inline struct ext4_extent_header *ext_inode_hdr(struct inode *inode)
 {

[PATCH 5.4 182/261] ext4: fix error pointer dereference

[Greg Kroah-Hartman]

From: Jeffle Xu <jefflexu@linux.alibaba.com>

commit 8418897f1bf87da0cb6936489d57a4320c32c0af upstream.

Don't pass error pointers to brelse().

commit 7159a986b420 ("ext4: fix some error pointer dereferences") has fixed
some cases, fix the remaining one case.

Once ext4_xattr_block_find()->ext4_sb_bread() failed, error pointer is
stored in @bs->bh, which will be passed to brelse() in the cleanup
routine of ext4_xattr_set_handle(). This will then cause a NULL panic
crash in __brelse().

BUG: unable to handle kernel NULL pointer dereference at 000000000000005b
RIP: 0010:__brelse+0x1b/0x50
Call Trace:
 ext4_xattr_set_handle+0x163/0x5d0
 ext4_xattr_set+0x95/0x110
 __vfs_setxattr+0x6b/0x80
 __vfs_setxattr_noperm+0x68/0x1b0
 vfs_setxattr+0xa0/0xb0
 setxattr+0x12c/0x1a0
 path_setxattr+0x8d/0xc0
 __x64_sys_setxattr+0x27/0x30
 do_syscall_64+0x60/0x250
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

In this case, @bs->bh stores '-EIO' actually.

Fixes: fb265c9cb49e ("ext4: add ext4_sb_bread() to disambiguate ENOMEM cases")
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: stable@kernel.org # 2.6.19
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/1587628004-95123-1-git-send-email-jefflexu@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/xattr.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -1820,8 +1820,11 @@ ext4_xattr_block_find(struct inode *inod
 	if (EXT4_I(inode)->i_file_acl) {
 		/* The inode already has an extended attribute block. */
 		bs->bh = ext4_sb_bread(sb, EXT4_I(inode)->i_file_acl, REQ_PRIO);
-		if (IS_ERR(bs->bh))
-			return PTR_ERR(bs->bh);
+		if (IS_ERR(bs->bh)) {
+			error = PTR_ERR(bs->bh);
+			bs->bh = NULL;
+			return error;
+		}
 		ea_bdebug(bs->bh, "b_count=%d, refcount=%d",
 			atomic_read(&(bs->bh->b_count)),
 			le32_to_cpu(BHDR(bs->bh)->h_refcount));

[PATCH 5.4 183/261] ext4: fix race between ext4_sync_parent() and rename()

[Greg Kroah-Hartman]

From: Eric Biggers <ebiggers@google.com>

commit 08adf452e628b0e2ce9a01048cfbec52353703d7 upstream.

'igrab(d_inode(dentry->d_parent))' without holding dentry->d_lock is
broken because without d_lock, d_parent can be concurrently changed due
to a rename().  Then if the old directory is immediately deleted, old
d_parent->inode can be NULL.  That causes a NULL dereference in igrab().

To fix this, use dget_parent() to safely grab a reference to the parent
dentry, which pins the inode.  This also eliminates the need to use
d_find_any_alias() other than for the initial inode, as we no longer
throw away the dentry at each step.

This is an extremely hard race to hit, but it is possible.  Adding a
udelay() in between the reads of ->d_parent and its ->d_inode makes it
reproducible on a no-journal filesystem using the following program:

    #include <fcntl.h>
    #include <unistd.h>

    int main()
    {
        if (fork()) {
            for (;;) {
                mkdir("dir1", 0700);
                int fd = open("dir1/file", O_RDWR|O_CREAT|O_SYNC);
                write(fd, "X", 1);
                close(fd);
            }
        } else {
            mkdir("dir2", 0700);
            for (;;) {
                rename("dir1/file", "dir2/file");
                rmdir("dir1");
            }
        }
    }

Fixes: d59729f4e794 ("ext4: fix races in ext4_sync_parent()")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20200506183140.541194-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/fsync.c |   28 +++++++++++++---------------
 1 file changed, 13 insertions(+), 15 deletions(-)

--- a/fs/ext4/fsync.c
+++ b/fs/ext4/fsync.c
@@ -44,30 +44,28 @@
  */
 static int ext4_sync_parent(struct inode *inode)
 {
-	struct dentry *dentry = NULL;
-	struct inode *next;
+	struct dentry *dentry, *next;
 	int ret = 0;
 
 	if (!ext4_test_inode_state(inode, EXT4_STATE_NEWENTRY))
 		return 0;
-	inode = igrab(inode);
+	dentry = d_find_any_alias(inode);
+	if (!dentry)
+		return 0;
 	while (ext4_test_inode_state(inode, EXT4_STATE_NEWENTRY)) {
 		ext4_clear_inode_state(inode, EXT4_STATE_NEWENTRY);
-		dentry = d_find_any_alias(inode);
-		if (!dentry)
-			break;
-		next = igrab(d_inode(dentry->d_parent));
+
+		next = dget_parent(dentry);
 		dput(dentry);
-		if (!next)
-			break;
-		iput(inode);
-		inode = next;
+		dentry = next;
+		inode = dentry->d_inode;
+
 		/*
 		 * The directory inode may have gone through rmdir by now. But
 		 * the inode itself and its blocks are still allocated (we hold
-		 * a reference to the inode so it didn't go through
-		 * ext4_evict_inode()) and so we are safe to flush metadata
-		 * blocks and the inode.
+		 * a reference to the inode via its dentry), so it didn't go
+		 * through ext4_evict_inode()) and so we are safe to flush
+		 * metadata blocks and the inode.
 		 */
 		ret = sync_mapping_buffers(inode->i_mapping);
 		if (ret)
@@ -76,7 +74,7 @@ static int ext4_sync_parent(struct inode
 		if (ret)
 			break;
 	}
-	iput(inode);
+	dput(dentry);
 	return ret;
 }
 

[PATCH 5.4 184/261] PCI: Avoid Pericom USB controller OHCI/EHCI PME# defect

[Greg Kroah-Hartman]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit 68f5fc4ea9ddf9f77720d568144219c4e6452cde ]

Both Pericom OHCI and EHCI devices advertise PME# support from all power
states:

  06:00.0 USB controller [0c03]: Pericom Semiconductor PI7C9X442SL USB OHCI Controller [12d8:400e] (rev 01) (prog-if 10 [OHCI])
    Subsystem: Pericom Semiconductor PI7C9X442SL USB OHCI Controller [12d8:400e]
    Capabilities: [80] Power Management version 3
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)

  06:00.2 USB controller [0c03]: Pericom Semiconductor PI7C9X442SL USB EHCI Controller [12d8:400f] (rev 01) (prog-if 20 [EHCI])
    Subsystem: Pericom Semiconductor PI7C9X442SL USB EHCI Controller [12d8:400f]
    Capabilities: [80] Power Management version 3
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)

But testing shows that it's unreliable: there is a 20% chance PME# won't be
asserted when a USB device is plugged.

Remove PME support for both devices to make USB plugging work reliably.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205981
Link: https://lore.kernel.org/r/20200508065343.32751-2-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/quirks.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 798e52051ecc..2e50eec41dc4 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -5551,6 +5551,19 @@ static void pci_fixup_no_d0_pme(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASMEDIA, 0x2142, pci_fixup_no_d0_pme);
 
+/*
+ * Device [12d8:0x400e] and [12d8:0x400f]
+ * These devices advertise PME# support in all power states but don't
+ * reliably assert it.
+ */
+static void pci_fixup_no_pme(struct pci_dev *dev)
+{
+	pci_info(dev, "PME# is unreliable, disabling it\n");
+	dev->pme_support = 0;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_PERICOM, 0x400e, pci_fixup_no_pme);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_PERICOM, 0x400f, pci_fixup_no_pme);
+
 static void apex_pci_fixup_class(struct pci_dev *pdev)
 {
 	pdev->class = (PCI_CLASS_SYSTEM_OTHER << 8) | pdev->class;
-- 
2.25.1

[PATCH 5.4 185/261] PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0

[Greg Kroah-Hartman]

From: Marcos Scriven <marcos@scriven.org>

[ Upstream commit 0d14f06cd6657ba3446a5eb780672da487b068e7 ]

The AMD Matisse HD Audio & USB 3.0 devices advertise Function Level Reset
support, but hang when an FLR is triggered.

To reproduce the problem, attach the device to a VM, then detach and try to
attach again.

Rename the existing quirk_intel_no_flr(), which was not Intel-specific, to
quirk_no_flr(), and apply it to prevent the use of FLR on these AMD
devices.

Link: https://lore.kernel.org/r/CAAri2DpkcuQZYbT6XsALhx2e6vRqPHwtbjHYeiH7MNp4zmt1RA@mail.gmail.com
Signed-off-by: Marcos Scriven <marcos@scriven.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/quirks.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 2e50eec41dc4..ba3b114dcfa9 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -5130,13 +5130,23 @@ static void quirk_intel_qat_vf_cap(struct pci_dev *pdev)
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x443, quirk_intel_qat_vf_cap);
 
-/* FLR may cause some 82579 devices to hang */
-static void quirk_intel_no_flr(struct pci_dev *dev)
+/*
+ * FLR may cause the following to devices to hang:
+ *
+ * AMD Starship/Matisse HD Audio Controller 0x1487
+ * AMD Matisse USB 3.0 Host Controller 0x149c
+ * Intel 82579LM Gigabit Ethernet Controller 0x1502
+ * Intel 82579V Gigabit Ethernet Controller 0x1503
+ *
+ */
+static void quirk_no_flr(struct pci_dev *dev)
 {
 	dev->dev_flags |= PCI_DEV_FLAGS_NO_FLR_RESET;
 }
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1502, quirk_intel_no_flr);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1503, quirk_intel_no_flr);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x1487, quirk_no_flr);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x149c, quirk_no_flr);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1502, quirk_no_flr);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1503, quirk_no_flr);
 
 static void quirk_no_ext_tags(struct pci_dev *pdev)
 {
-- 
2.25.1

[PATCH 5.4 186/261] PCI: Avoid FLR for AMD Starship USB 3.0

[Greg Kroah-Hartman]

From: Kevin Buettner <kevinb@redhat.com>

[ Upstream commit 5727043c73fdfe04597971b5f3f4850d879c1f4f ]

The AMD Starship USB 3.0 host controller advertises Function Level Reset
support, but it apparently doesn't work.  Add a quirk to prevent use of FLR
on this device.

Without this quirk, when attempting to assign (pass through) an AMD
Starship USB 3.0 host controller to a guest OS, the system becomes
increasingly unresponsive over the course of several minutes, eventually
requiring a hard reset.  Shortly after attempting to start the guest, I see
these messages:

  vfio-pci 0000:05:00.3: not ready 1023ms after FLR; waiting
  vfio-pci 0000:05:00.3: not ready 2047ms after FLR; waiting
  vfio-pci 0000:05:00.3: not ready 4095ms after FLR; waiting
  vfio-pci 0000:05:00.3: not ready 8191ms after FLR; waiting

And then eventually:

  vfio-pci 0000:05:00.3: not ready 65535ms after FLR; giving up
  INFO: NMI handler (perf_event_nmi_handler) took too long to run: 0.000 msecs
  perf: interrupt took too long (642744 > 2500), lowering kernel.perf_event_max_sample_rate to 1000
  INFO: NMI handler (perf_event_nmi_handler) took too long to run: 82.270 msecs
  INFO: NMI handler (perf_event_nmi_handler) took too long to run: 680.608 msecs
  INFO: NMI handler (perf_event_nmi_handler) took too long to run: 100.952 msecs
  ...
  watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [qemu-system-x86:7487]

Tested on a Micro-Star International Co., Ltd. MS-7C59/Creator TRX40
motherboard with an AMD Ryzen Threadripper 3970X.

Link: https://lore.kernel.org/r/20200524003529.598434ff@f31-4.lan
Signed-off-by: Kevin Buettner <kevinb@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/quirks.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index ba3b114dcfa9..d59a735927f7 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -5134,6 +5134,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x443, quirk_intel_qat_vf_cap);
  * FLR may cause the following to devices to hang:
  *
  * AMD Starship/Matisse HD Audio Controller 0x1487
+ * AMD Starship USB 3.0 Host Controller 0x148c
  * AMD Matisse USB 3.0 Host Controller 0x149c
  * Intel 82579LM Gigabit Ethernet Controller 0x1502
  * Intel 82579V Gigabit Ethernet Controller 0x1503
@@ -5144,6 +5145,7 @@ static void quirk_no_flr(struct pci_dev *dev)
 	dev->dev_flags |= PCI_DEV_FLAGS_NO_FLR_RESET;
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x1487, quirk_no_flr);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x148c, quirk_no_flr);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x149c, quirk_no_flr);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1502, quirk_no_flr);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1503, quirk_no_flr);
-- 
2.25.1

[PATCH 5.4 187/261] PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints

[Greg Kroah-Hartman]

From: Ashok Raj <ashok.raj@intel.com>

[ Upstream commit 3247bd10a4502a3075ce8e1c3c7d31ef76f193ce ]

All Intel platforms guarantee that all root complex implementations must
send transactions up to IOMMU for address translations. Hence for Intel
RCiEP devices, we can assume some ACS-type isolation even without an ACS
capability.

>From the Intel VT-d spec, r3.1, sec 3.16 ("Root-Complex Peer to Peer
Considerations"):

  When DMA remapping is enabled, peer-to-peer requests through the
  Root-Complex must be handled as follows:

  - The input address in the request is translated (through first-level,
    second-level or nested translation) to a host physical address (HPA).
    The address decoding for peer addresses must be done only on the
    translated HPA. Hardware implementations are free to further limit
    peer-to-peer accesses to specific host physical address regions (or
    to completely disallow peer-forwarding of translated requests).

  - Since address translation changes the contents (address field) of
    the PCI Express Transaction Layer Packet (TLP), for PCI Express
    peer-to-peer requests with ECRC, the Root-Complex hardware must use
    the new ECRC (re-computed with the translated address) if it
    decides to forward the TLP as a peer request.

  - Root-ports, and multi-function root-complex integrated endpoints, may
    support additional peer-to-peer control features by supporting PCI
    Express Access Control Services (ACS) capability. Refer to ACS
    capability in PCI Express specifications for details.

Since Linux didn't give special treatment to allow this exception, certain
RCiEP MFD devices were grouped in a single IOMMU group. This doesn't permit
a single device to be assigned to a guest for instance.

In one vendor system: Device 14.x were grouped in a single IOMMU group.

  /sys/kernel/iommu_groups/5/devices/0000:00:14.0
  /sys/kernel/iommu_groups/5/devices/0000:00:14.2
  /sys/kernel/iommu_groups/5/devices/0000:00:14.3

After this patch:

  /sys/kernel/iommu_groups/5/devices/0000:00:14.0
  /sys/kernel/iommu_groups/5/devices/0000:00:14.2
  /sys/kernel/iommu_groups/6/devices/0000:00:14.3 <<< new group

14.0 and 14.2 are integrated devices, but legacy end points, whereas 14.3
was a PCIe-compliant RCiEP.

  00:14.3 Network controller: Intel Corporation Device 9df0 (rev 30)
    Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00

This permits assigning this device to a guest VM.

[bhelgaas: drop "Fixes" tag since this doesn't fix a bug in that commit]
Link: https://lore.kernel.org/r/1590699462-7131-1-git-send-email-ashok.raj@intel.com
Tested-by: Darrel Goeddel <dgoeddel@forcepoint.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Mark Scott <mscott@forcepoint.com>,
Cc: Romil Sharma <rsharma@forcepoint.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/quirks.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index d59a735927f7..a1ec8a1977d3 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4683,6 +4683,20 @@ static int pci_quirk_mf_endpoint_acs(struct pci_dev *dev, u16 acs_flags)
 		PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_DT);
 }
 
+static int pci_quirk_rciep_acs(struct pci_dev *dev, u16 acs_flags)
+{
+	/*
+	 * Intel RCiEP's are required to allow p2p only on translated
+	 * addresses.  Refer to Intel VT-d specification, r3.1, sec 3.16,
+	 * "Root-Complex Peer to Peer Considerations".
+	 */
+	if (pci_pcie_type(dev) != PCI_EXP_TYPE_RC_END)
+		return -ENOTTY;
+
+	return pci_acs_ctrl_enabled(acs_flags,
+		PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
+}
+
 static int pci_quirk_brcm_acs(struct pci_dev *dev, u16 acs_flags)
 {
 	/*
@@ -4765,6 +4779,7 @@ static const struct pci_dev_acs_enabled {
 	/* I219 */
 	{ PCI_VENDOR_ID_INTEL, 0x15b7, pci_quirk_mf_endpoint_acs },
 	{ PCI_VENDOR_ID_INTEL, 0x15b8, pci_quirk_mf_endpoint_acs },
+	{ PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_rciep_acs },
 	/* QCOM QDF2xxx root ports */
 	{ PCI_VENDOR_ID_QCOM, 0x0400, pci_quirk_qcom_rp_acs },
 	{ PCI_VENDOR_ID_QCOM, 0x0401, pci_quirk_qcom_rp_acs },
-- 
2.25.1

[PATCH 5.4 188/261] PCI: vmd: Add device id for VMD device 8086:9A0B

[Greg Kroah-Hartman]

From: Jon Derrick <jonathan.derrick@intel.com>

[ Upstream commit ec11e5c213cc20cac5e8310728b06793448b9f6d ]

This patch adds support for this VMD device which supports the bus
restriction mode.

Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/vmd.c | 2 ++
 include/linux/pci_ids.h      | 1 +
 2 files changed, 3 insertions(+)

diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c
index a35d3f3996d7..afc1a3d240b5 100644
--- a/drivers/pci/controller/vmd.c
+++ b/drivers/pci/controller/vmd.c
@@ -854,6 +854,8 @@ static const struct pci_device_id vmd_ids[] = {
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VMD_28C0),
 		.driver_data = VMD_FEAT_HAS_MEMBAR_SHADOW |
 				VMD_FEAT_HAS_BUS_RESTRICTIONS,},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VMD_9A0B),
+		.driver_data = VMD_FEAT_HAS_BUS_RESTRICTIONS,},
 	{0,}
 };
 MODULE_DEVICE_TABLE(pci, vmd_ids);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 228f66347620..dae9ffe4478f 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -3008,6 +3008,7 @@
 #define PCI_DEVICE_ID_INTEL_84460GX	0x84ea
 #define PCI_DEVICE_ID_INTEL_IXP4XX	0x8500
 #define PCI_DEVICE_ID_INTEL_IXP2800	0x9004
+#define PCI_DEVICE_ID_INTEL_VMD_9A0B	0x9a0b
 #define PCI_DEVICE_ID_INTEL_S21152BB	0xb152
 
 #define PCI_VENDOR_ID_SCALEMP		0x8686
-- 
2.25.1

[PATCH 5.4 189/261] x86/amd_nb: Add Family 19h PCI IDs

[Greg Kroah-Hartman]

From: Yazen Ghannam <yazen.ghannam@amd.com>

[ Upstream commit b3f79ae45904ae987a7c06a9e8d6084d7b73e67f ]

Add the new PCI Device 18h IDs for AMD Family 19h systems. Note that
Family 19h systems will not have a new PCI root device ID.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200110015651.14887-4-Yazen.Ghannam@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/amd_nb.c | 3 +++
 include/linux/pci_ids.h  | 1 +
 2 files changed, 4 insertions(+)

diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c
index 251c795b4eb3..69aed0ebbdfc 100644
--- a/arch/x86/kernel/amd_nb.c
+++ b/arch/x86/kernel/amd_nb.c
@@ -22,6 +22,7 @@
 #define PCI_DEVICE_ID_AMD_17H_M10H_DF_F4 0x15ec
 #define PCI_DEVICE_ID_AMD_17H_M30H_DF_F4 0x1494
 #define PCI_DEVICE_ID_AMD_17H_M70H_DF_F4 0x1444
+#define PCI_DEVICE_ID_AMD_19H_DF_F4	0x1654
 
 /* Protect the PCI config register pairs used for SMN and DF indirect access. */
 static DEFINE_MUTEX(smn_mutex);
@@ -52,6 +53,7 @@ const struct pci_device_id amd_nb_misc_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M30H_DF_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M70H_DF_F3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_DF_F3) },
 	{}
 };
 EXPORT_SYMBOL_GPL(amd_nb_misc_ids);
@@ -66,6 +68,7 @@ static const struct pci_device_id amd_nb_link_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M10H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M30H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M70H_DF_F4) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CNB17H_F4) },
 	{}
 };
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index dae9ffe4478f..6693cf561cd1 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -549,6 +549,7 @@
 #define PCI_DEVICE_ID_AMD_17H_M10H_DF_F3 0x15eb
 #define PCI_DEVICE_ID_AMD_17H_M30H_DF_F3 0x1493
 #define PCI_DEVICE_ID_AMD_17H_M70H_DF_F3 0x1443
+#define PCI_DEVICE_ID_AMD_19H_DF_F3	0x1653
 #define PCI_DEVICE_ID_AMD_CNB17H_F3	0x1703
 #define PCI_DEVICE_ID_AMD_LANCE		0x2000
 #define PCI_DEVICE_ID_AMD_LANCE_HOME	0x2001
-- 
2.25.1

[PATCH 5.4 190/261] PCI: Add Loongson vendor ID

[Greg Kroah-Hartman]

From: Tiezhu Yang <yangtiezhu@loongson.cn>

[ Upstream commit 9acb9fe18d863aacc99948963f8d5d447dc311be ]

Add the Loongson vendor ID to pci_ids.h to be used by the controller
driver in the future.

The Loongson vendor ID can be found at the following link:
https://git.kernel.org/pub/scm/utils/pciutils/pciutils.git/tree/pci.ids

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/pci_ids.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 6693cf561cd1..1dfc4e1dcb94 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -148,6 +148,8 @@
 
 /* Vendors and devices.  Sort key: vendor first, device next. */
 
+#define PCI_VENDOR_ID_LOONGSON		0x0014
+
 #define PCI_VENDOR_ID_TTTECH		0x0357
 #define PCI_DEVICE_ID_TTTECH_MC322	0x000a
 
-- 
2.25.1

[PATCH 5.4 191/261] serial: 8250_pci: Move Pericom IDs to pci_ids.h

[Greg Kroah-Hartman]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit 62a7f3009a460001eb46984395280dd900bc4ef4 ]

Move the IDs to pci_ids.h so it can be used by next patch.

Link: https://lore.kernel.org/r/20200508065343.32751-1-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/8250/8250_pci.c | 6 ------
 include/linux/pci_ids.h            | 6 ++++++
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 8a01d034f9d1..7cad66eb39ff 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1871,12 +1871,6 @@ pci_moxa_setup(struct serial_private *priv,
 #define PCIE_DEVICE_ID_WCH_CH384_4S	0x3470
 #define PCIE_DEVICE_ID_WCH_CH382_2S	0x3253
 
-#define PCI_VENDOR_ID_PERICOM			0x12D8
-#define PCI_DEVICE_ID_PERICOM_PI7C9X7951	0x7951
-#define PCI_DEVICE_ID_PERICOM_PI7C9X7952	0x7952
-#define PCI_DEVICE_ID_PERICOM_PI7C9X7954	0x7954
-#define PCI_DEVICE_ID_PERICOM_PI7C9X7958	0x7958
-
 #define PCI_VENDOR_ID_ACCESIO			0x494f
 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB	0x1051
 #define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S	0x1053
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 1dfc4e1dcb94..9a57e6717e5c 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1832,6 +1832,12 @@
 #define PCI_VENDOR_ID_NVIDIA_SGS	0x12d2
 #define PCI_DEVICE_ID_NVIDIA_SGS_RIVA128 0x0018
 
+#define PCI_VENDOR_ID_PERICOM			0x12D8
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7951	0x7951
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7952	0x7952
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7954	0x7954
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7958	0x7958
+
 #define PCI_SUBVENDOR_ID_CHASE_PCIFAST		0x12E0
 #define PCI_SUBDEVICE_ID_CHASE_PCIFAST4		0x0031
 #define PCI_SUBDEVICE_ID_CHASE_PCIFAST8		0x0021
-- 
2.25.1

[PATCH 5.4 192/261] x86/amd_nb: Add AMD family 17h model 60h PCI IDs

[Greg Kroah-Hartman]

From: Alexander Monakov <amonakov@ispras.ru>

[ Upstream commit a4e91825d7e1252f7cba005f1451e5464b23c15d ]

Add PCI IDs for AMD Renoir (4000-series Ryzen CPUs). This is necessary
to enable support for temperature sensors via the k10temp module.

Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Yazen Ghannam <yazen.ghannam@amd.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lkml.kernel.org/r/20200510204842.2603-2-amonakov@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/amd_nb.c | 5 +++++
 include/linux/pci_ids.h  | 1 +
 2 files changed, 6 insertions(+)

diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c
index 69aed0ebbdfc..c4bc01da820e 100644
--- a/arch/x86/kernel/amd_nb.c
+++ b/arch/x86/kernel/amd_nb.c
@@ -18,9 +18,11 @@
 #define PCI_DEVICE_ID_AMD_17H_ROOT	0x1450
 #define PCI_DEVICE_ID_AMD_17H_M10H_ROOT	0x15d0
 #define PCI_DEVICE_ID_AMD_17H_M30H_ROOT	0x1480
+#define PCI_DEVICE_ID_AMD_17H_M60H_ROOT	0x1630
 #define PCI_DEVICE_ID_AMD_17H_DF_F4	0x1464
 #define PCI_DEVICE_ID_AMD_17H_M10H_DF_F4 0x15ec
 #define PCI_DEVICE_ID_AMD_17H_M30H_DF_F4 0x1494
+#define PCI_DEVICE_ID_AMD_17H_M60H_DF_F4 0x144c
 #define PCI_DEVICE_ID_AMD_17H_M70H_DF_F4 0x1444
 #define PCI_DEVICE_ID_AMD_19H_DF_F4	0x1654
 
@@ -33,6 +35,7 @@ static const struct pci_device_id amd_root_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_ROOT) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M10H_ROOT) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M30H_ROOT) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M60H_ROOT) },
 	{}
 };
 
@@ -51,6 +54,7 @@ const struct pci_device_id amd_nb_misc_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_DF_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M10H_DF_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M30H_DF_F3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M60H_DF_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M70H_DF_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_DF_F3) },
@@ -67,6 +71,7 @@ static const struct pci_device_id amd_nb_link_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M10H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M30H_DF_F4) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M60H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M70H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CNB17H_F4) },
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 9a57e6717e5c..0ad57693f392 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -550,6 +550,7 @@
 #define PCI_DEVICE_ID_AMD_17H_DF_F3	0x1463
 #define PCI_DEVICE_ID_AMD_17H_M10H_DF_F3 0x15eb
 #define PCI_DEVICE_ID_AMD_17H_M30H_DF_F3 0x1493
+#define PCI_DEVICE_ID_AMD_17H_M60H_DF_F3 0x144b
 #define PCI_DEVICE_ID_AMD_17H_M70H_DF_F3 0x1443
 #define PCI_DEVICE_ID_AMD_19H_DF_F3	0x1653
 #define PCI_DEVICE_ID_AMD_CNB17H_F3	0x1703
-- 
2.25.1

[PATCH 5.4 193/261] ima: Remove redundant policy rule set in add_rules()

[Greg Kroah-Hartman]

From: Krzysztof Struczynski <krzysztof.struczynski@huawei.com>

[ Upstream commit 6ee28442a465ab4c4be45e3b15015af24b1ba906 ]

Function ima_appraise_flag() returns the flag to be set in
temp_ima_appraise depending on the hook identifier passed as an argument.
It is not necessary to set the flag again for the POLICY_CHECK hook.

Signed-off-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/integrity/ima/ima_policy.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/security/integrity/ima/ima_policy.c b/security/integrity/ima/ima_policy.c
index 99d357e84ee9..86624b1331ef 100644
--- a/security/integrity/ima/ima_policy.c
+++ b/security/integrity/ima/ima_policy.c
@@ -590,11 +590,8 @@ static void add_rules(struct ima_rule_entry *entries, int count,
 
 			list_add_tail(&entry->list, &ima_policy_rules);
 		}
-		if (entries[i].action == APPRAISE) {
+		if (entries[i].action == APPRAISE)
 			temp_ima_appraise |= ima_appraise_flag(entries[i].func);
-			if (entries[i].func == POLICY_CHECK)
-				temp_ima_appraise |= IMA_APPRAISE_POLICY;
-		}
 	}
 }
 
-- 
2.25.1

[PATCH 5.4 194/261] ima: Set again build_ima_appraise variable

[Greg Kroah-Hartman]

From: Krzysztof Struczynski <krzysztof.struczynski@huawei.com>

[ Upstream commit b59fda449cf07f2db3be3a67142e6c000f5e8d79 ]

After adding the new add_rule() function in commit c52657d93b05
("ima: refactor ima_init_policy()"), all appraisal flags are added to the
temp_ima_appraise variable. Revert to the previous behavior instead of
removing build_ima_appraise, to benefit from the protection offered by
__ro_after_init.

The mentioned commit introduced a bug, as it makes all the flags
modifiable, while build_ima_appraise flags can be protected with
__ro_after_init.

Cc: stable@vger.kernel.org # 5.0.x
Fixes: c52657d93b05 ("ima: refactor ima_init_policy()")
Co-developed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/integrity/ima/ima_policy.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/security/integrity/ima/ima_policy.c b/security/integrity/ima/ima_policy.c
index 86624b1331ef..558a7607bf93 100644
--- a/security/integrity/ima/ima_policy.c
+++ b/security/integrity/ima/ima_policy.c
@@ -590,8 +590,14 @@ static void add_rules(struct ima_rule_entry *entries, int count,
 
 			list_add_tail(&entry->list, &ima_policy_rules);
 		}
-		if (entries[i].action == APPRAISE)
-			temp_ima_appraise |= ima_appraise_flag(entries[i].func);
+		if (entries[i].action == APPRAISE) {
+			if (entries != build_appraise_rules)
+				temp_ima_appraise |=
+					ima_appraise_flag(entries[i].func);
+			else
+				build_ima_appraise |=
+					ima_appraise_flag(entries[i].func);
+		}
 	}
 }
 
-- 
2.25.1

[PATCH 5.4 195/261] PCI: Program MPS for RCiEP devices

[Greg Kroah-Hartman]

From: Ashok Raj <ashok.raj@intel.com>

commit aa0ce96d72dd2e1b0dfd0fb868f82876e7790878 upstream.

Root Complex Integrated Endpoints (RCiEPs) do not have an upstream bridge,
so pci_configure_mps() previously ignored them, which may result in reduced
performance.

Instead, program the Max_Payload_Size of RCiEPs to the maximum supported
value (unless it is limited for the PCIE_BUS_PEER2PEER case).  This also
affects the subsequent programming of Max_Read_Request_Size because Linux
programs MRRS based on the MPS value.

Fixes: 9dae3a97297f ("PCI: Move MPS configuration check to pci_configure_device()")
Link: https://lore.kernel.org/r/1585343775-4019-1-git-send-email-ashok.raj@intel.com
Tested-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/probe.c |   22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1889,13 +1889,33 @@ static void pci_configure_mps(struct pci
 	struct pci_dev *bridge = pci_upstream_bridge(dev);
 	int mps, mpss, p_mps, rc;
 
-	if (!pci_is_pcie(dev) || !bridge || !pci_is_pcie(bridge))
+	if (!pci_is_pcie(dev))
 		return;
 
 	/* MPS and MRRS fields are of type 'RsvdP' for VFs, short-circuit out */
 	if (dev->is_virtfn)
 		return;
 
+	/*
+	 * For Root Complex Integrated Endpoints, program the maximum
+	 * supported value unless limited by the PCIE_BUS_PEER2PEER case.
+	 */
+	if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) {
+		if (pcie_bus_config == PCIE_BUS_PEER2PEER)
+			mps = 128;
+		else
+			mps = 128 << dev->pcie_mpss;
+		rc = pcie_set_mps(dev, mps);
+		if (rc) {
+			pci_warn(dev, "can't set Max Payload Size to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n",
+				 mps);
+		}
+		return;
+	}
+
+	if (!bridge || !pci_is_pcie(bridge))
+		return;
+
 	mps = pcie_get_mps(dev);
 	p_mps = pcie_get_mps(bridge);
 

[PATCH 5.4 196/261] e1000e: Disable TSO for buffer overrun workaround

[Greg Kroah-Hartman]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

commit f29801030ac67bf98b7a65d3aea67b30769d4f7c upstream.

Commit b10effb92e27 ("e1000e: fix buffer overrun while the I219 is
processing DMA transactions") imposes roughly 30% performance penalty.

The commit log states that "Disabling TSO eliminates performance loss
for TCP traffic without a noticeable impact on CPU performance", so
let's disable TSO by default to regain the loss.

CC: stable <stable@vger.kernel.org>
Fixes: b10effb92e27 ("e1000e: fix buffer overrun while the I219 is processing DMA transactions")
BugLink: https://bugs.launchpad.net/bugs/1802691
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/intel/e1000e/netdev.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -5289,6 +5289,10 @@ static void e1000_watchdog_task(struct w
 					/* oops */
 					break;
 				}
+				if (hw->mac.type == e1000_pch_spt) {
+					netdev->features &= ~NETIF_F_TSO;
+					netdev->features &= ~NETIF_F_TSO6;
+				}
 			}
 
 			/* enable transmits in the hardware, need to do this

[PATCH 5.4 197/261] e1000e: Relax condition to trigger reset for ME workaround

[Greg Kroah-Hartman]

From: Punit Agrawal <punit1.agrawal@toshiba.co.jp>

commit d601afcae2febc49665008e9a79e701248d56c50 upstream.

It's an error if the value of the RX/TX tail descriptor does not match
what was written. The error condition is true regardless the duration
of the interference from ME. But the driver only performs the reset if
E1000_ICH_FWSM_PCIM2PCI_COUNT (2000) iterations of 50us delay have
transpired. The extra condition can lead to inconsistency between the
state of hardware as expected by the driver.

Fix this by dropping the check for number of delay iterations.

While at it, also make __ew32_prepare() static as it's not used
anywhere else.

CC: stable <stable@vger.kernel.org>
Signed-off-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/intel/e1000e/e1000.h  |    1 -
 drivers/net/ethernet/intel/e1000e/netdev.c |   12 +++++-------
 2 files changed, 5 insertions(+), 8 deletions(-)

--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -576,7 +576,6 @@ static inline u32 __er32(struct e1000_hw
 
 #define er32(reg)	__er32(hw, E1000_##reg)
 
-s32 __ew32_prepare(struct e1000_hw *hw);
 void __ew32(struct e1000_hw *hw, unsigned long reg, u32 val);
 
 #define ew32(reg, val)	__ew32(hw, E1000_##reg, (val))
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -119,14 +119,12 @@ static const struct e1000_reg_info e1000
  * has bit 24 set while ME is accessing MAC CSR registers, wait if it is set
  * and try again a number of times.
  **/
-s32 __ew32_prepare(struct e1000_hw *hw)
+static void __ew32_prepare(struct e1000_hw *hw)
 {
 	s32 i = E1000_ICH_FWSM_PCIM2PCI_COUNT;
 
 	while ((er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI) && --i)
 		udelay(50);
-
-	return i;
 }
 
 void __ew32(struct e1000_hw *hw, unsigned long reg, u32 val)
@@ -607,11 +605,11 @@ static void e1000e_update_rdt_wa(struct
 {
 	struct e1000_adapter *adapter = rx_ring->adapter;
 	struct e1000_hw *hw = &adapter->hw;
-	s32 ret_val = __ew32_prepare(hw);
 
+	__ew32_prepare(hw);
 	writel(i, rx_ring->tail);
 
-	if (unlikely(!ret_val && (i != readl(rx_ring->tail)))) {
+	if (unlikely(i != readl(rx_ring->tail))) {
 		u32 rctl = er32(RCTL);
 
 		ew32(RCTL, rctl & ~E1000_RCTL_EN);
@@ -624,11 +622,11 @@ static void e1000e_update_tdt_wa(struct
 {
 	struct e1000_adapter *adapter = tx_ring->adapter;
 	struct e1000_hw *hw = &adapter->hw;
-	s32 ret_val = __ew32_prepare(hw);
 
+	__ew32_prepare(hw);
 	writel(i, tx_ring->tail);
 
-	if (unlikely(!ret_val && (i != readl(tx_ring->tail)))) {
+	if (unlikely(i != readl(tx_ring->tail))) {
 		u32 tctl = er32(TCTL);
 
 		ew32(TCTL, tctl & ~E1000_TCTL_EN);

[PATCH 5.4 198/261] carl9170: remove P2P_GO support

[Greg Kroah-Hartman]

From: Christian Lamparter <chunkeey@gmail.com>

commit b14fba7ebd04082f7767a11daea7f12f3593de22 upstream.

This patch follows up on a bug-report by Frank Schäfer that
discovered P2P GO wasn't working with wpa_supplicant.
This patch removes part of the broken P2P GO support but
keeps the vif switchover code in place.

Cc: <stable@vger.kernel.org>
Link: <https://lkml.kernel.org/r/3a9d86b6-744f-e670-8792-9167257edef8@googlemail.com>
Reported-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200425092811.9494-1-chunkeey@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/carl9170/fw.c   |    4 +---
 drivers/net/wireless/ath/carl9170/main.c |   21 ++++-----------------
 2 files changed, 5 insertions(+), 20 deletions(-)

--- a/drivers/net/wireless/ath/carl9170/fw.c
+++ b/drivers/net/wireless/ath/carl9170/fw.c
@@ -338,9 +338,7 @@ static int carl9170_fw(struct ar9170 *ar
 		ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
 
 		if (SUPP(CARL9170FW_WLANTX_CAB)) {
-			if_comb_types |=
-				BIT(NL80211_IFTYPE_AP) |
-				BIT(NL80211_IFTYPE_P2P_GO);
+			if_comb_types |= BIT(NL80211_IFTYPE_AP);
 
 #ifdef CONFIG_MAC80211_MESH
 			if_comb_types |=
--- a/drivers/net/wireless/ath/carl9170/main.c
+++ b/drivers/net/wireless/ath/carl9170/main.c
@@ -582,11 +582,10 @@ static int carl9170_init_interface(struc
 	ar->disable_offload |= ((vif->type != NL80211_IFTYPE_STATION) &&
 	    (vif->type != NL80211_IFTYPE_AP));
 
-	/* While the driver supports HW offload in a single
-	 * P2P client configuration, it doesn't support HW
-	 * offload in the favourit, concurrent P2P GO+CLIENT
-	 * configuration. Hence, HW offload will always be
-	 * disabled for P2P.
+	/* The driver used to have P2P GO+CLIENT support,
+	 * but since this was dropped and we don't know if
+	 * there are any gremlins lurking in the shadows,
+	 * so best we keep HW offload disabled for P2P.
 	 */
 	ar->disable_offload |= vif->p2p;
 
@@ -639,18 +638,6 @@ static int carl9170_op_add_interface(str
 			if (vif->type == NL80211_IFTYPE_STATION)
 				break;
 
-			/* P2P GO [master] use-case
-			 * Because the P2P GO station is selected dynamically
-			 * by all participating peers of a WIFI Direct network,
-			 * the driver has be able to change the main interface
-			 * operating mode on the fly.
-			 */
-			if (main_vif->p2p && vif->p2p &&
-			    vif->type == NL80211_IFTYPE_AP) {
-				old_main = main_vif;
-				break;
-			}
-
 			err = -EBUSY;
 			rcu_read_unlock();
 

[PATCH 5.4 199/261] media: go7007: fix a miss of snd_card_free

[Greg Kroah-Hartman]

From: Chuhong Yuan <hslester96@gmail.com>

commit 9453264ef58638ce8976121ac44c07a3ef375983 upstream.

go7007_snd_init() misses a snd_card_free() in an error path.
Add the missed call to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/go7007/snd-go7007.c |   35 ++++++++++++++++------------------
 1 file changed, 17 insertions(+), 18 deletions(-)

--- a/drivers/media/usb/go7007/snd-go7007.c
+++ b/drivers/media/usb/go7007/snd-go7007.c
@@ -236,22 +236,18 @@ int go7007_snd_init(struct go7007 *go)
 	gosnd->capturing = 0;
 	ret = snd_card_new(go->dev, index[dev], id[dev], THIS_MODULE, 0,
 			   &gosnd->card);
-	if (ret < 0) {
-		kfree(gosnd);
-		return ret;
-	}
+	if (ret < 0)
+		goto free_snd;
+
 	ret = snd_device_new(gosnd->card, SNDRV_DEV_LOWLEVEL, go,
 			&go7007_snd_device_ops);
-	if (ret < 0) {
-		kfree(gosnd);
-		return ret;
-	}
+	if (ret < 0)
+		goto free_card;
+
 	ret = snd_pcm_new(gosnd->card, "go7007", 0, 0, 1, &gosnd->pcm);
-	if (ret < 0) {
-		snd_card_free(gosnd->card);
-		kfree(gosnd);
-		return ret;
-	}
+	if (ret < 0)
+		goto free_card;
+
 	strscpy(gosnd->card->driver, "go7007", sizeof(gosnd->card->driver));
 	strscpy(gosnd->card->shortname, go->name, sizeof(gosnd->card->shortname));
 	strscpy(gosnd->card->longname, gosnd->card->shortname,
@@ -262,11 +258,8 @@ int go7007_snd_init(struct go7007 *go)
 			&go7007_snd_capture_ops);
 
 	ret = snd_card_register(gosnd->card);
-	if (ret < 0) {
-		snd_card_free(gosnd->card);
-		kfree(gosnd);
-		return ret;
-	}
+	if (ret < 0)
+		goto free_card;
 
 	gosnd->substream = NULL;
 	go->snd_context = gosnd;
@@ -274,6 +267,12 @@ int go7007_snd_init(struct go7007 *go)
 	++dev;
 
 	return 0;
+
+free_card:
+	snd_card_free(gosnd->card);
+free_snd:
+	kfree(gosnd);
+	return ret;
 }
 EXPORT_SYMBOL(go7007_snd_init);
 

[PATCH 5.4 200/261] media: cedrus: Program output format during each run

[Greg Kroah-Hartman]

From: Samuel Holland <samuel@sholland.org>

commit a8876c22eab9a871834f85de83e98bbf7e6e264d upstream.

Previously, the output format was programmed as part of the ioctl()
handler. However, this has two problems:

  1) If there are multiple active streams with different output
     formats, the hardware will use whichever format was set last
     for both streams. Similarly, an ioctl() done in an inactive
     context will wrongly affect other active contexts.
  2) The registers are written while the device is not actively
     streaming. To enable runtime PM tied to the streaming state,
     all hardware access needs to be moved inside cedrus_device_run().

The call to cedrus_dst_format_set() is now placed just before the
codec-specific callback that programs the hardware.

Cc: <stable@vger.kernel.org>
Fixes: 50e761516f2b ("media: platform: Add Cedrus VPU decoder driver")
Suggested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Suggested-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/media/sunxi/cedrus/cedrus_dec.c   |    2 ++
 drivers/staging/media/sunxi/cedrus/cedrus_video.c |    3 ---
 2 files changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/staging/media/sunxi/cedrus/cedrus_dec.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_dec.c
@@ -65,6 +65,8 @@ void cedrus_device_run(void *priv)
 
 	v4l2_m2m_buf_copy_metadata(run.src, run.dst, true);
 
+	cedrus_dst_format_set(dev, &ctx->dst_fmt);
+
 	dev->dec_ops[ctx->current_codec]->setup(ctx, &run);
 
 	/* Complete request(s) controls if needed. */
--- a/drivers/staging/media/sunxi/cedrus/cedrus_video.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_video.c
@@ -286,7 +286,6 @@ static int cedrus_s_fmt_vid_cap(struct f
 				struct v4l2_format *f)
 {
 	struct cedrus_ctx *ctx = cedrus_file2ctx(file);
-	struct cedrus_dev *dev = ctx->dev;
 	struct vb2_queue *vq;
 	int ret;
 
@@ -300,8 +299,6 @@ static int cedrus_s_fmt_vid_cap(struct f
 
 	ctx->dst_fmt = f->fmt.pix;
 
-	cedrus_dst_format_set(dev, &ctx->dst_fmt);
-
 	return 0;
 }
 

[PATCH 5.4 201/261] serial: 8250: Avoid error message on reprobe

[Greg Kroah-Hartman]

From: Lukas Wunner <lukas@wunner.de>

commit e0a851fe6b9b619527bd928aa93caaddd003f70c upstream.

If the call to uart_add_one_port() in serial8250_register_8250_port()
fails, a half-initialized entry in the serial_8250ports[] array is left
behind.

A subsequent reprobe of the same serial port causes that entry to be
reused.  Because uart->port.dev is set, uart_remove_one_port() is called
for the half-initialized entry and bails out with an error message:

bcm2835-aux-uart 3f215040.serial: Removing wrong port: (null) != (ptrval)

The same happens on failure of mctrl_gpio_init() since commit
4a96895f74c9 ("tty/serial/8250: use mctrl_gpio helpers").

Fix by zeroing the uart->port.dev pointer in the probe error path.

The bug was introduced in v2.6.10 by historical commit befff6f5bf5f
("[SERIAL] Add new port registration/unregistration functions."):
https://git.kernel.org/tglx/history/c/befff6f5bf5f

The commit added an unconditional call to uart_remove_one_port() in
serial8250_register_port().  In v3.7, commit 835d844d1a28 ("8250_pnp:
do pnp probe before legacy probe") made that call conditional on
uart->port.dev which allows me to fix the issue by zeroing that pointer
in the error path.  Thus, the present commit will fix the problem as far
back as v3.7 whereas still older versions need to also cherry-pick
835d844d1a28.

Fixes: 835d844d1a28 ("8250_pnp: do pnp probe before legacy probe")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v2.6.10
Cc: stable@vger.kernel.org # v2.6.10: 835d844d1a28: 8250_pnp: do pnp probe before legacy
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/b4a072013ee1a1d13ee06b4325afb19bda57ca1b.1589285873.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_core.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1026,7 +1026,7 @@ int serial8250_register_8250_port(struct
 			gpios = mctrl_gpio_init(&uart->port, 0);
 			if (IS_ERR(gpios)) {
 				ret = PTR_ERR(gpios);
-				goto out_unlock;
+				goto err;
 			} else {
 				uart->gpios = gpios;
 			}
@@ -1075,8 +1075,10 @@ int serial8250_register_8250_port(struct
 			serial8250_apply_quirks(uart);
 			ret = uart_add_one_port(&serial8250_reg,
 						&uart->port);
-			if (ret == 0)
-				ret = uart->port.line;
+			if (ret)
+				goto err;
+
+			ret = uart->port.line;
 		} else {
 			dev_info(uart->port.dev,
 				"skipping CIR port at 0x%lx / 0x%llx, IRQ %d\n",
@@ -1098,10 +1100,14 @@ int serial8250_register_8250_port(struct
 		}
 	}
 
-out_unlock:
 	mutex_unlock(&serial_mutex);
 
 	return ret;
+
+err:
+	uart->port.dev = NULL;
+	mutex_unlock(&serial_mutex);
+	return ret;
 }
 EXPORT_SYMBOL(serial8250_register_8250_port);
 

[PATCH 5.4 202/261] Bluetooth: hci_bcm: fix freeing not-requested IRQ

[Greg Kroah-Hartman]

From: Michał Mirosław <mirq-linux@rere.qmqm.pl>

commit 81bd5d0c62437c02caac6b3f942fcda874063cb0 upstream.

When BT module can't be initialized, but it has an IRQ, unloading
the driver WARNs when trying to free not-yet-requested IRQ. Fix it by
noting whether the IRQ was requested.

WARNING: CPU: 2 PID: 214 at kernel/irq/devres.c:144 devm_free_irq+0x49/0x4ca
[...]
WARNING: CPU: 2 PID: 214 at kernel/irq/manage.c:1746 __free_irq+0x8b/0x27c
Trying to free already-free IRQ 264
Modules linked in: hci_uart(-) btbcm bluetooth ecdh_generic ecc libaes
CPU: 2 PID: 214 Comm: rmmod Tainted: G        W         5.6.1mq-00044-ga5f9ea098318-dirty #928
[...]
[<b016aefb>] (devm_free_irq) from [<af8ba1ff>] (bcm_close+0x97/0x118 [hci_uart])
[<af8ba1ff>] (bcm_close [hci_uart]) from [<af8b736f>] (hci_uart_unregister_device+0x33/0x3c [hci_uart])
[<af8b736f>] (hci_uart_unregister_device [hci_uart]) from [<b035930b>] (serdev_drv_remove+0x13/0x20)
[<b035930b>] (serdev_drv_remove) from [<b037093b>] (device_release_driver_internal+0x97/0x118)
[<b037093b>] (device_release_driver_internal) from [<b0370a0b>] (driver_detach+0x2f/0x58)
[<b0370a0b>] (driver_detach) from [<b036f855>] (bus_remove_driver+0x41/0x94)
[<b036f855>] (bus_remove_driver) from [<af8ba8db>] (bcm_deinit+0x1b/0x740 [hci_uart])
[<af8ba8db>] (bcm_deinit [hci_uart]) from [<af8ba86f>] (hci_uart_exit+0x13/0x30 [hci_uart])
[<af8ba86f>] (hci_uart_exit [hci_uart]) from [<b01900bd>] (sys_delete_module+0x109/0x1d0)
[<b01900bd>] (sys_delete_module) from [<b0101001>] (ret_fast_syscall+0x1/0x5a)
[...]

Cc: stable@vger.kernel.org
Fixes: 6cc4396c8829 ("Bluetooth: hci_bcm: Add wake-up capability")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/bluetooth/hci_bcm.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -107,6 +107,7 @@ struct bcm_device {
 	u32			oper_speed;
 	int			irq;
 	bool			irq_active_low;
+	bool			irq_acquired;
 
 #ifdef CONFIG_PM
 	struct hci_uart		*hu;
@@ -319,6 +320,8 @@ static int bcm_request_irq(struct bcm_da
 		goto unlock;
 	}
 
+	bdev->irq_acquired = true;
+
 	device_init_wakeup(bdev->dev, true);
 
 	pm_runtime_set_autosuspend_delay(bdev->dev,
@@ -487,7 +490,7 @@ static int bcm_close(struct hci_uart *hu
 	}
 
 	if (bdev) {
-		if (IS_ENABLED(CONFIG_PM) && bdev->irq > 0) {
+		if (IS_ENABLED(CONFIG_PM) && bdev->irq_acquired) {
 			devm_free_irq(bdev->dev, bdev->irq, bdev);
 			device_init_wakeup(bdev->dev, false);
 			pm_runtime_disable(bdev->dev);

[PATCH 5.4 203/261] b43legacy: Fix case where channel status is corrupted

[Greg Kroah-Hartman]

From: Larry Finger <Larry.Finger@lwfinger.net>

commit ec4d3e3a054578de34cd0b587ab8a1ac36f629d9 upstream.

This patch fixes commit 75388acd0cd8 ("add mac80211-based driver for
legacy BCM43xx devices")

In https://bugzilla.kernel.org/show_bug.cgi?id=207093, a defect in
b43legacy is reported. Upon testing, thus problem exists on PPC and
X86 platforms, is present in the oldest kernel tested (3.2), and
has been present in the driver since it was first added to the kernel.

The problem is a corrupted channel status received from the device.
Both the internal card in a PowerBook G4 and the PCMCIA version
(Broadcom BCM4306 with PCI ID 14e4:4320) have the problem. Only Rev, 2
(revision 4 of the 802.11 core) of the chip has been tested. No other
devices using b43legacy are available for testing.

Various sources of the problem were considered. Buffer overrun and
other sources of corruption within the driver were rejected because
the faulty channel status is always the same, not a random value.
It was concluded that the faulty data is coming from the device, probably
due to a firmware bug. As that source is not available, the driver
must take appropriate action to recover.

At present, the driver reports the error, and them continues to process
the bad packet. This is believed that to be a mistake, and the correct
action is to drop the correpted packet.

Fixes: 75388acd0cd8 ("add mac80211-based driver for legacy BCM43xx devices")
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-and-tested by: F. Erhard <erhard_f@mailbox.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200407190043.1686-1-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/broadcom/b43legacy/xmit.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/wireless/broadcom/b43legacy/xmit.c
+++ b/drivers/net/wireless/broadcom/b43legacy/xmit.c
@@ -558,6 +558,7 @@ void b43legacy_rx(struct b43legacy_wldev
 	default:
 		b43legacywarn(dev->wl, "Unexpected value for chanstat (0x%X)\n",
 		       chanstat);
+		goto drop;
 	}
 
 	memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));

[PATCH 5.4 204/261] b43: Fix connection problem with WPA3

[Greg Kroah-Hartman]

From: Larry Finger <Larry.Finger@lwfinger.net>

commit 75d057bda1fbca6ade21378aa45db712e5f7d962 upstream.

Since the driver was first introduced into the kernel, it has only
handled the ciphers associated with WEP, WPA, and WPA2. It fails with
WPA3 even though mac80211 can handle those additional ciphers in software,
b43 did not report that it could handle them. By setting MFP_CAPABLE using
ieee80211_set_hw(), the problem is fixed.

With this change, b43 will handle the ciphers it knows in hardware,
and let mac80211 handle the others in software. It is not necessary to
use the module parameter NOHWCRYPT to turn hardware encryption off.
Although this change essentially eliminates that module parameter,
I am choosing to keep it for cases where the hardware is broken,
and software encryption is required for all ciphers.

Reported-and-tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200526155909.5807-2-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/broadcom/b43/main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/broadcom/b43/main.c
+++ b/drivers/net/wireless/broadcom/b43/main.c
@@ -5569,7 +5569,7 @@ static struct b43_wl *b43_wireless_init(
 	/* fill hw info */
 	ieee80211_hw_set(hw, RX_INCLUDES_FCS);
 	ieee80211_hw_set(hw, SIGNAL_DBM);
-
+	ieee80211_hw_set(hw, MFP_CAPABLE);
 	hw->wiphy->interface_modes =
 		BIT(NL80211_IFTYPE_AP) |
 		BIT(NL80211_IFTYPE_MESH_POINT) |

[PATCH 5.4 205/261] b43_legacy: Fix connection problem with WPA3

[Greg Kroah-Hartman]

From: Larry Finger <Larry.Finger@lwfinger.net>

commit 6a29d134c04a8acebb7a95251acea7ad7abba106 upstream.

Since the driver was first introduced into the kernel, it has only
handled the ciphers associated with WEP, WPA, and WPA2. It fails with
WPA3 even though mac80211 can handle those additional ciphers in software,
b43legacy did not report that it could handle them. By setting MFP_CAPABLE using
ieee80211_set_hw(), the problem is fixed.

With this change, b43legacy will handle the ciphers it knows in hardware,
and let mac80211 handle the others in software. It is not necessary to
use the module parameter NOHWCRYPT to turn hardware encryption off.
Although this change essentially eliminates that module parameter,
I am choosing to keep it for cases where the hardware is broken,
and software encryption is required for all ciphers.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200526155909.5807-3-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/broadcom/b43legacy/main.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/wireless/broadcom/b43legacy/main.c
+++ b/drivers/net/wireless/broadcom/b43legacy/main.c
@@ -3801,6 +3801,7 @@ static int b43legacy_wireless_init(struc
 	/* fill hw info */
 	ieee80211_hw_set(hw, RX_INCLUDES_FCS);
 	ieee80211_hw_set(hw, SIGNAL_DBM);
+	ieee80211_hw_set(hw, MFP_CAPABLE); /* Allow WPA3 in software */
 
 	hw->wiphy->interface_modes =
 		BIT(NL80211_IFTYPE_AP) |

[PATCH 5.4 206/261] media: ov5640: fix use of destroyed mutex

[Greg Kroah-Hartman]

From: Tomi Valkeinen <tomi.valkeinen@ti.com>

commit bfcba38d95a0aed146a958a84a2177af1459eddc upstream.

v4l2_ctrl_handler_free() uses hdl->lock, which in ov5640 driver is set
to sensor's own sensor->lock. In ov5640_remove(), the driver destroys the
sensor->lock first, and then calls v4l2_ctrl_handler_free(), resulting
in the use of the destroyed mutex.

Fix this by calling moving the mutex_destroy() to the end of the cleanup
sequence, as there's no need to destroy the mutex as early as possible.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: stable@vger.kernel.org # v4.14+
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/i2c/ov5640.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -3068,8 +3068,8 @@ static int ov5640_probe(struct i2c_clien
 free_ctrls:
 	v4l2_ctrl_handler_free(&sensor->ctrls.handler);
 entity_cleanup:
-	mutex_destroy(&sensor->lock);
 	media_entity_cleanup(&sensor->sd.entity);
+	mutex_destroy(&sensor->lock);
 	return ret;
 }
 
@@ -3079,9 +3079,9 @@ static int ov5640_remove(struct i2c_clie
 	struct ov5640_dev *sensor = to_ov5640_dev(sd);
 
 	v4l2_async_unregister_subdev(&sensor->sd);
-	mutex_destroy(&sensor->lock);
 	media_entity_cleanup(&sensor->sd.entity);
 	v4l2_ctrl_handler_free(&sensor->ctrls.handler);
+	mutex_destroy(&sensor->lock);
 
 	return 0;
 }

[PATCH 5.4 207/261] clk: mediatek: assign the initial value to clk_init_data of mtk_mux

[Greg Kroah-Hartman]

From: Weiyi Lu <weiyi.lu@mediatek.com>

commit 571cfadcc628dd5591444f7289e27445ea732f4c upstream.

When some new clock supports are introduced, e.g. [1]
it might lead to an error although it should be NULL because
clk_init_data is on the stack and it might have random values
if using without initialization.
Add the missing initial value to clk_init_data.

[1] https://android-review.googlesource.com/c/kernel/common/+/1278046

Fixes: a3ae549917f1 ("clk: mediatek: Add new clkmux register API")
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1590560749-29136-1-git-send-email-weiyi.lu@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/clk/mediatek/clk-mux.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/clk/mediatek/clk-mux.c
+++ b/drivers/clk/mediatek/clk-mux.c
@@ -160,7 +160,7 @@ struct clk *mtk_clk_register_mux(const s
 				 spinlock_t *lock)
 {
 	struct mtk_clk_mux *clk_mux;
-	struct clk_init_data init;
+	struct clk_init_data init = {};
 	struct clk *clk;
 
 	clk_mux = kzalloc(sizeof(*clk_mux), GFP_KERNEL);

[PATCH 5.4 208/261] igb: Report speed and duplex as unknown when device is runtime suspended

[Greg Kroah-Hartman]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

commit 165ae7a8feb53dc47fb041357e4b253bfc927cf9 upstream.

igb device gets runtime suspended when there's no link partner. We can't
get correct speed under that state:
$ cat /sys/class/net/enp3s0/speed
1000

In addition to that, an error can also be spotted in dmesg:
[  385.991957] igb 0000:03:00.0 enp3s0: PCIe link lost

Since device can only be runtime suspended when there's no link partner,
we can skip reading register and let the following logic set speed and
duplex with correct status.

The more generic approach will be wrap get_link_ksettings() with begin()
and complete() callbacks. However, for this particular issue, begin()
calls igb_runtime_resume() , which tries to rtnl_lock() while the lock
is already hold by upper ethtool layer.

So let's take this approach until the igb_runtime_resume() no longer
needs to hold rtnl_lock.

CC: stable <stable@vger.kernel.org>
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/intel/igb/igb_ethtool.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -143,7 +143,8 @@ static int igb_get_link_ksettings(struct
 	u32 speed;
 	u32 supported, advertising;
 
-	status = rd32(E1000_STATUS);
+	status = pm_runtime_suspended(&adapter->pdev->dev) ?
+		 0 : rd32(E1000_STATUS);
 	if (hw->phy.media_type == e1000_media_type_copper) {
 
 		supported = (SUPPORTED_10baseT_Half |

[PATCH 5.4 209/261] hwmon: (k10temp) Add AMD family 17h model 60h PCI match

[Greg Kroah-Hartman]

From: Alexander Monakov <amonakov@ispras.ru>

commit 279f0b3a4b80660fba6faadc2ca2fa426bf3f7e9 upstream.

Add support for retrieving Tdie and Tctl on AMD Renoir (4000-series
Ryzen CPUs).

It appears SMU offsets for reading current/voltage and CCD temperature
have changed for this generation (reads from currently used offsets
yield zeros), so those features cannot be enabled so trivially.

Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lkml.kernel.org/r/20200510204842.2603-3-amonakov@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hwmon/k10temp.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -349,6 +349,7 @@ static const struct pci_device_id k10tem
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_DF_F3) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M10H_DF_F3) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M30H_DF_F3) },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M60H_DF_F3) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M70H_DF_F3) },
 	{ PCI_VDEVICE(HYGON, PCI_DEVICE_ID_AMD_17H_DF_F3) },
 	{}

[PATCH 5.4 210/261] EDAC/amd64: Add AMD family 17h model 60h PCI IDs

[Greg Kroah-Hartman]

From: Alexander Monakov <amonakov@ispras.ru>

commit b6bea24d41519e8c31e4798f1c1a3f67e540c5d0 upstream.

Add support for AMD Renoir (4000-series Ryzen CPUs).

Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lkml.kernel.org/r/20200510204842.2603-4-amonakov@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/edac/amd64_edac.c |   13 +++++++++++++
 drivers/edac/amd64_edac.h |    3 +++
 2 files changed, 16 insertions(+)

--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -2317,6 +2317,15 @@ static struct amd64_family_type family_t
 			.dbam_to_cs		= f17_addr_mask_to_cs_size,
 		}
 	},
+	[F17_M60H_CPUS] = {
+		.ctl_name = "F17h_M60h",
+		.f0_id = PCI_DEVICE_ID_AMD_17H_M60H_DF_F0,
+		.f6_id = PCI_DEVICE_ID_AMD_17H_M60H_DF_F6,
+		.ops = {
+			.early_channel_count	= f17_early_channel_count,
+			.dbam_to_cs		= f17_addr_mask_to_cs_size,
+		}
+	},
 	[F17_M70H_CPUS] = {
 		.ctl_name = "F17h_M70h",
 		.f0_id = PCI_DEVICE_ID_AMD_17H_M70H_DF_F0,
@@ -3366,6 +3375,10 @@ static struct amd64_family_type *per_fam
 			fam_type = &family_types[F17_M30H_CPUS];
 			pvt->ops = &family_types[F17_M30H_CPUS].ops;
 			break;
+		} else if (pvt->model >= 0x60 && pvt->model <= 0x6f) {
+			fam_type = &family_types[F17_M60H_CPUS];
+			pvt->ops = &family_types[F17_M60H_CPUS].ops;
+			break;
 		} else if (pvt->model >= 0x70 && pvt->model <= 0x7f) {
 			fam_type = &family_types[F17_M70H_CPUS];
 			pvt->ops = &family_types[F17_M70H_CPUS].ops;
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -120,6 +120,8 @@
 #define PCI_DEVICE_ID_AMD_17H_M10H_DF_F6 0x15ee
 #define PCI_DEVICE_ID_AMD_17H_M30H_DF_F0 0x1490
 #define PCI_DEVICE_ID_AMD_17H_M30H_DF_F6 0x1496
+#define PCI_DEVICE_ID_AMD_17H_M60H_DF_F0 0x1448
+#define PCI_DEVICE_ID_AMD_17H_M60H_DF_F6 0x144e
 #define PCI_DEVICE_ID_AMD_17H_M70H_DF_F0 0x1440
 #define PCI_DEVICE_ID_AMD_17H_M70H_DF_F6 0x1446
 
@@ -291,6 +293,7 @@ enum amd_families {
 	F17_CPUS,
 	F17_M10H_CPUS,
 	F17_M30H_CPUS,
+	F17_M60H_CPUS,
 	F17_M70H_CPUS,
 	NUM_FAMILIES,
 };

[PATCH 5.4 211/261] power: vexpress: add suppress_bind_attrs to true

[Greg Kroah-Hartman]

From: Anders Roxell <anders.roxell@linaro.org>

commit 73174acc9c75960af2daa7dcbdb9781fc0d135cb upstream.

Make sure that the POWER_RESET_VEXPRESS driver won't have bind/unbind
attributes available via the sysfs, so lets be explicit here and use
".suppress_bind_attrs = true" to prevent userspace from doing something
silly.

Link: https://lore.kernel.org/r/20200527112608.3886105-2-anders.roxell@linaro.org
Cc: stable@vger.kernel.org
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/power/reset/vexpress-poweroff.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/power/reset/vexpress-poweroff.c
+++ b/drivers/power/reset/vexpress-poweroff.c
@@ -143,6 +143,7 @@ static struct platform_driver vexpress_r
 	.driver = {
 		.name = "vexpress-reset",
 		.of_match_table = vexpress_reset_of_match,
+		.suppress_bind_attrs = true,
 	},
 };
 

[PATCH 5.4 212/261] power: supply: core: fix HWMON temperature labels

[Greg Kroah-Hartman]

From: Michał Mirosław <mirq-linux@rere.qmqm.pl>

commit 6b20464ad9fb5fd76ef6f219ce62156aa9639dcc upstream.

tempX_label files are swapped compared to what
power_supply_hwmon_temp_to_property() uses. Make them match.

Cc: stable@vger.kernel.org
Fixes: e67d4dfc9ff1 ("power: supply: Add HWMON compatibility layer")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/power/supply/power_supply_hwmon.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/power/supply/power_supply_hwmon.c
+++ b/drivers/power/supply/power_supply_hwmon.c
@@ -144,7 +144,7 @@ static int power_supply_hwmon_read_strin
 					  u32 attr, int channel,
 					  const char **str)
 {
-	*str = channel ? "temp" : "temp ambient";
+	*str = channel ? "temp ambient" : "temp";
 	return 0;
 }
 

[PATCH 5.4 213/261] power: supply: core: fix memory leak in HWMON error path

[Greg Kroah-Hartman]

From: Qiushi Wu <wu000273@umn.edu>

commit 1d7a7128a2e9e1f137c99b0a44e94d70a77343e3 upstream.

In function power_supply_add_hwmon_sysfs(), psyhw->props is
allocated by bitmap_zalloc(). But this pointer is not deallocated
when devm_add_action fail,  which lead to a memory leak bug. To fix
this, we replace devm_add_action with devm_add_action_or_reset.

Cc: stable@kernel.org
Fixes: e67d4dfc9ff19 ("power: supply: Add HWMON compatibility layer")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/power/supply/power_supply_hwmon.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/power/supply/power_supply_hwmon.c
+++ b/drivers/power/supply/power_supply_hwmon.c
@@ -304,7 +304,7 @@ int power_supply_add_hwmon_sysfs(struct
 		goto error;
 	}
 
-	ret = devm_add_action(dev, power_supply_hwmon_bitmap_free,
+	ret = devm_add_action_or_reset(dev, power_supply_hwmon_bitmap_free,
 			      psyhw->props);
 	if (ret)
 		goto error;

[PATCH 5.4 214/261] pinctrl: samsung: Correct setting of eint wakeup mask on s5pv210

[Greg Kroah-Hartman]

From: Jonathan Bakker <xc-racer2@live.ca>

commit b577a279914085c6b657c33e9f39ef56d96a3302 upstream.

Commit a8be2af0218c ("pinctrl: samsung: Write external wakeup interrupt
mask") started writing the eint wakeup mask from the pinctrl driver.
Unfortunately, it made the assumption that the private retention data
was always a regmap while in the case of s5pv210 it is a raw pointer
to the clock base (as the eint wakeup mask not in the PMU as with newer
Exynos platforms).

Fixes: a8be2af0218c ("pinctrl: samsung: Write external wakeup interrupt mask")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pinctrl/samsung/pinctrl-exynos.c |   73 ++++++++++++++++++++-----------
 1 file changed, 49 insertions(+), 24 deletions(-)

--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -40,6 +40,8 @@ struct exynos_irq_chip {
 	u32 eint_pend;
 	u32 eint_wake_mask_value;
 	u32 eint_wake_mask_reg;
+	void (*set_eint_wakeup_mask)(struct samsung_pinctrl_drv_data *drvdata,
+				     struct exynos_irq_chip *irq_chip);
 };
 
 static inline struct exynos_irq_chip *to_exynos_irq_chip(struct irq_chip *chip)
@@ -342,6 +344,47 @@ static int exynos_wkup_irq_set_wake(stru
 	return 0;
 }
 
+static void
+exynos_pinctrl_set_eint_wakeup_mask(struct samsung_pinctrl_drv_data *drvdata,
+				    struct exynos_irq_chip *irq_chip)
+{
+	struct regmap *pmu_regs;
+
+	if (!drvdata->retention_ctrl || !drvdata->retention_ctrl->priv) {
+		dev_warn(drvdata->dev,
+			 "No retention data configured bank with external wakeup interrupt. Wake-up mask will not be set.\n");
+		return;
+	}
+
+	pmu_regs = drvdata->retention_ctrl->priv;
+	dev_info(drvdata->dev,
+		 "Setting external wakeup interrupt mask: 0x%x\n",
+		 irq_chip->eint_wake_mask_value);
+
+	regmap_write(pmu_regs, irq_chip->eint_wake_mask_reg,
+		     irq_chip->eint_wake_mask_value);
+}
+
+static void
+s5pv210_pinctrl_set_eint_wakeup_mask(struct samsung_pinctrl_drv_data *drvdata,
+				    struct exynos_irq_chip *irq_chip)
+
+{
+	void __iomem *clk_base;
+
+	if (!drvdata->retention_ctrl || !drvdata->retention_ctrl->priv) {
+		dev_warn(drvdata->dev,
+			 "No retention data configured bank with external wakeup interrupt. Wake-up mask will not be set.\n");
+		return;
+	}
+
+
+	clk_base = (void __iomem *) drvdata->retention_ctrl->priv;
+
+	__raw_writel(irq_chip->eint_wake_mask_value,
+		     clk_base + irq_chip->eint_wake_mask_reg);
+}
+
 /*
  * irq_chip for wakeup interrupts
  */
@@ -360,8 +403,9 @@ static const struct exynos_irq_chip s5pv
 	.eint_mask = EXYNOS_WKUP_EMASK_OFFSET,
 	.eint_pend = EXYNOS_WKUP_EPEND_OFFSET,
 	.eint_wake_mask_value = EXYNOS_EINT_WAKEUP_MASK_DISABLED,
-	/* Only difference with exynos4210_wkup_irq_chip: */
+	/* Only differences with exynos4210_wkup_irq_chip: */
 	.eint_wake_mask_reg = S5PV210_EINT_WAKEUP_MASK,
+	.set_eint_wakeup_mask = s5pv210_pinctrl_set_eint_wakeup_mask,
 };
 
 static const struct exynos_irq_chip exynos4210_wkup_irq_chip __initconst = {
@@ -380,6 +424,7 @@ static const struct exynos_irq_chip exyn
 	.eint_pend = EXYNOS_WKUP_EPEND_OFFSET,
 	.eint_wake_mask_value = EXYNOS_EINT_WAKEUP_MASK_DISABLED,
 	.eint_wake_mask_reg = EXYNOS_EINT_WAKEUP_MASK,
+	.set_eint_wakeup_mask = exynos_pinctrl_set_eint_wakeup_mask,
 };
 
 static const struct exynos_irq_chip exynos7_wkup_irq_chip __initconst = {
@@ -398,6 +443,7 @@ static const struct exynos_irq_chip exyn
 	.eint_pend = EXYNOS7_WKUP_EPEND_OFFSET,
 	.eint_wake_mask_value = EXYNOS_EINT_WAKEUP_MASK_DISABLED,
 	.eint_wake_mask_reg = EXYNOS5433_EINT_WAKEUP_MASK,
+	.set_eint_wakeup_mask = exynos_pinctrl_set_eint_wakeup_mask,
 };
 
 /* list of external wakeup controllers supported */
@@ -574,27 +620,6 @@ int exynos_eint_wkup_init(struct samsung
 	return 0;
 }
 
-static void
-exynos_pinctrl_set_eint_wakeup_mask(struct samsung_pinctrl_drv_data *drvdata,
-				    struct exynos_irq_chip *irq_chip)
-{
-	struct regmap *pmu_regs;
-
-	if (!drvdata->retention_ctrl || !drvdata->retention_ctrl->priv) {
-		dev_warn(drvdata->dev,
-			 "No retention data configured bank with external wakeup interrupt. Wake-up mask will not be set.\n");
-		return;
-	}
-
-	pmu_regs = drvdata->retention_ctrl->priv;
-	dev_info(drvdata->dev,
-		 "Setting external wakeup interrupt mask: 0x%x\n",
-		 irq_chip->eint_wake_mask_value);
-
-	regmap_write(pmu_regs, irq_chip->eint_wake_mask_reg,
-		     irq_chip->eint_wake_mask_value);
-}
-
 static void exynos_pinctrl_suspend_bank(
 				struct samsung_pinctrl_drv_data *drvdata,
 				struct samsung_pin_bank *bank)
@@ -626,8 +651,8 @@ void exynos_pinctrl_suspend(struct samsu
 		else if (bank->eint_type == EINT_TYPE_WKUP) {
 			if (!irq_chip) {
 				irq_chip = bank->irq_chip;
-				exynos_pinctrl_set_eint_wakeup_mask(drvdata,
-								    irq_chip);
+				irq_chip->set_eint_wakeup_mask(drvdata,
+							       irq_chip);
 			} else if (bank->irq_chip != irq_chip) {
 				dev_warn(drvdata->dev,
 					 "More than one external wakeup interrupt chip configured (bank: %s). This is not supported by hardware nor by driver.\n",

[PATCH 5.4 215/261] pinctrl: samsung: Save/restore eint_mask over suspend for EINT_TYPE GPIOs

[Greg Kroah-Hartman]

From: Jonathan Bakker <xc-racer2@live.ca>

commit f354157a7d184db430c1a564c506434e33b1bec5 upstream.

Currently, for EINT_TYPE GPIOs, the CON and FLTCON registers
are saved and restored over a suspend/resume cycle.  However, the
EINT_MASK registers are not.

On S5PV210 at the very least, these registers are not retained over
suspend, leading to the interrupts remaining masked upon resume and
therefore no interrupts being triggered for the device.  There should
be no effect on any SoCs that do retain these registers as theoretically
we would just be re-writing what was already there.

Fixes: 7ccbc60cd9c2 ("pinctrl: exynos: Handle suspend/resume of GPIO EINT registers")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pinctrl/samsung/pinctrl-exynos.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -267,6 +267,7 @@ struct exynos_eint_gpio_save {
 	u32 eint_con;
 	u32 eint_fltcon0;
 	u32 eint_fltcon1;
+	u32 eint_mask;
 };
 
 /*
@@ -633,10 +634,13 @@ static void exynos_pinctrl_suspend_bank(
 						+ 2 * bank->eint_offset);
 	save->eint_fltcon1 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET
 						+ 2 * bank->eint_offset + 4);
+	save->eint_mask = readl(regs + bank->irq_chip->eint_mask
+						+ bank->eint_offset);
 
 	pr_debug("%s: save     con %#010x\n", bank->name, save->eint_con);
 	pr_debug("%s: save fltcon0 %#010x\n", bank->name, save->eint_fltcon0);
 	pr_debug("%s: save fltcon1 %#010x\n", bank->name, save->eint_fltcon1);
+	pr_debug("%s: save    mask %#010x\n", bank->name, save->eint_mask);
 }
 
 void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata)
@@ -678,6 +682,9 @@ static void exynos_pinctrl_resume_bank(
 	pr_debug("%s: fltcon1 %#010x => %#010x\n", bank->name,
 			readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET
 			+ 2 * bank->eint_offset + 4), save->eint_fltcon1);
+	pr_debug("%s:    mask %#010x => %#010x\n", bank->name,
+			readl(regs + bank->irq_chip->eint_mask
+			+ bank->eint_offset), save->eint_mask);
 
 	writel(save->eint_con, regs + EXYNOS_GPIO_ECON_OFFSET
 						+ bank->eint_offset);
@@ -685,6 +692,8 @@ static void exynos_pinctrl_resume_bank(
 						+ 2 * bank->eint_offset);
 	writel(save->eint_fltcon1, regs + EXYNOS_GPIO_EFLTCON_OFFSET
 						+ 2 * bank->eint_offset + 4);
+	writel(save->eint_mask, regs + bank->irq_chip->eint_mask
+						+ bank->eint_offset);
 }
 
 void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)

[PATCH 5.4 216/261] gnss: sirf: fix error return code in sirf_probe()

[Greg Kroah-Hartman]

From: Wei Yongjun <weiyongjun1@huawei.com>

commit 43d7ce70ae43dd8523754b17f567417e0e75dbce upstream.

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

This avoids a use-after-free in case the driver is later unbound.

Fixes: d2efbbd18b1e ("gnss: add driver for sirfstar-based receivers")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
[ johan: amend commit message; mention potential use-after-free ]
Cc: stable <stable@vger.kernel.org>	# 4.19
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gnss/sirf.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/gnss/sirf.c
+++ b/drivers/gnss/sirf.c
@@ -439,14 +439,18 @@ static int sirf_probe(struct serdev_devi
 
 	data->on_off = devm_gpiod_get_optional(dev, "sirf,onoff",
 			GPIOD_OUT_LOW);
-	if (IS_ERR(data->on_off))
+	if (IS_ERR(data->on_off)) {
+		ret = PTR_ERR(data->on_off);
 		goto err_put_device;
+	}
 
 	if (data->on_off) {
 		data->wakeup = devm_gpiod_get_optional(dev, "sirf,wakeup",
 				GPIOD_IN);
-		if (IS_ERR(data->wakeup))
+		if (IS_ERR(data->wakeup)) {
+			ret = PTR_ERR(data->wakeup);
 			goto err_put_device;
+		}
 
 		ret = regulator_enable(data->vcc);
 		if (ret)

[PATCH 5.4 217/261] sparc32: fix register window handling in genregs32_[gs]et()

[Greg Kroah-Hartman]

From: Al Viro <viro@zeniv.linux.org.uk>

commit cf51e129b96847f969bfb8af1ee1516a01a70b39 upstream.

It needs access_process_vm() if the traced process does not share
mm with the caller.  Solution is similar to what sparc64 does.
Note that genregs32_set() is only ever called with pos being 0
or 32 * sizeof(u32) (the latter - as part of PTRACE_SETREGS
handling).

Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/sparc/kernel/ptrace_32.c |  230 ++++++++++++++++++------------------------
 1 file changed, 99 insertions(+), 131 deletions(-)

--- a/arch/sparc/kernel/ptrace_32.c
+++ b/arch/sparc/kernel/ptrace_32.c
@@ -46,82 +46,79 @@ enum sparc_regset {
 	REGSET_FP,
 };
 
+static int regwindow32_get(struct task_struct *target,
+			   const struct pt_regs *regs,
+			   u32 *uregs)
+{
+	unsigned long reg_window = regs->u_regs[UREG_I6];
+	int size = 16 * sizeof(u32);
+
+	if (target == current) {
+		if (copy_from_user(uregs, (void __user *)reg_window, size))
+			return -EFAULT;
+	} else {
+		if (access_process_vm(target, reg_window, uregs, size,
+				      FOLL_FORCE) != size)
+			return -EFAULT;
+	}
+	return 0;
+}
+
+static int regwindow32_set(struct task_struct *target,
+			   const struct pt_regs *regs,
+			   u32 *uregs)
+{
+	unsigned long reg_window = regs->u_regs[UREG_I6];
+	int size = 16 * sizeof(u32);
+
+	if (target == current) {
+		if (copy_to_user((void __user *)reg_window, uregs, size))
+			return -EFAULT;
+	} else {
+		if (access_process_vm(target, reg_window, uregs, size,
+				      FOLL_FORCE | FOLL_WRITE) != size)
+			return -EFAULT;
+	}
+	return 0;
+}
+
 static int genregs32_get(struct task_struct *target,
 			 const struct user_regset *regset,
 			 unsigned int pos, unsigned int count,
 			 void *kbuf, void __user *ubuf)
 {
 	const struct pt_regs *regs = target->thread.kregs;
-	unsigned long __user *reg_window;
-	unsigned long *k = kbuf;
-	unsigned long __user *u = ubuf;
-	unsigned long reg;
+	u32 uregs[16];
+	int ret;
 
 	if (target == current)
 		flush_user_windows();
 
-	pos /= sizeof(reg);
-	count /= sizeof(reg);
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  regs->u_regs,
+				  0, 16 * sizeof(u32));
+	if (ret || !count)
+		return ret;
 
-	if (kbuf) {
-		for (; count > 0 && pos < 16; count--)
-			*k++ = regs->u_regs[pos++];
-
-		reg_window = (unsigned long __user *) regs->u_regs[UREG_I6];
-		reg_window -= 16;
-		for (; count > 0 && pos < 32; count--) {
-			if (get_user(*k++, &reg_window[pos++]))
-				return -EFAULT;
-		}
-	} else {
-		for (; count > 0 && pos < 16; count--) {
-			if (put_user(regs->u_regs[pos++], u++))
-				return -EFAULT;
-		}
-
-		reg_window = (unsigned long __user *) regs->u_regs[UREG_I6];
-		reg_window -= 16;
-		for (; count > 0 && pos < 32; count--) {
-			if (get_user(reg, &reg_window[pos++]) ||
-			    put_user(reg, u++))
-				return -EFAULT;
-		}
-	}
-	while (count > 0) {
-		switch (pos) {
-		case 32: /* PSR */
-			reg = regs->psr;
-			break;
-		case 33: /* PC */
-			reg = regs->pc;
-			break;
-		case 34: /* NPC */
-			reg = regs->npc;
-			break;
-		case 35: /* Y */
-			reg = regs->y;
-			break;
-		case 36: /* WIM */
-		case 37: /* TBR */
-			reg = 0;
-			break;
-		default:
-			goto finish;
-		}
-
-		if (kbuf)
-			*k++ = reg;
-		else if (put_user(reg, u++))
+	if (pos < 32 * sizeof(u32)) {
+		if (regwindow32_get(target, regs, uregs))
 			return -EFAULT;
-		pos++;
-		count--;
+		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+					  uregs,
+					  16 * sizeof(u32), 32 * sizeof(u32));
+		if (ret || !count)
+			return ret;
 	}
-finish:
-	pos *= sizeof(reg);
-	count *= sizeof(reg);
 
-	return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
-					38 * sizeof(reg), -1);
+	uregs[0] = regs->psr;
+	uregs[1] = regs->pc;
+	uregs[2] = regs->npc;
+	uregs[3] = regs->y;
+	uregs[4] = 0;	/* WIM */
+	uregs[5] = 0;	/* TBR */
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  uregs,
+				  32 * sizeof(u32), 38 * sizeof(u32));
 }
 
 static int genregs32_set(struct task_struct *target,
@@ -130,82 +127,53 @@ static int genregs32_set(struct task_str
 			 const void *kbuf, const void __user *ubuf)
 {
 	struct pt_regs *regs = target->thread.kregs;
-	unsigned long __user *reg_window;
-	const unsigned long *k = kbuf;
-	const unsigned long __user *u = ubuf;
-	unsigned long reg;
+	u32 uregs[16];
+	u32 psr;
+	int ret;
 
 	if (target == current)
 		flush_user_windows();
 
-	pos /= sizeof(reg);
-	count /= sizeof(reg);
-
-	if (kbuf) {
-		for (; count > 0 && pos < 16; count--)
-			regs->u_regs[pos++] = *k++;
-
-		reg_window = (unsigned long __user *) regs->u_regs[UREG_I6];
-		reg_window -= 16;
-		for (; count > 0 && pos < 32; count--) {
-			if (put_user(*k++, &reg_window[pos++]))
-				return -EFAULT;
-		}
-	} else {
-		for (; count > 0 && pos < 16; count--) {
-			if (get_user(reg, u++))
-				return -EFAULT;
-			regs->u_regs[pos++] = reg;
-		}
-
-		reg_window = (unsigned long __user *) regs->u_regs[UREG_I6];
-		reg_window -= 16;
-		for (; count > 0 && pos < 32; count--) {
-			if (get_user(reg, u++) ||
-			    put_user(reg, &reg_window[pos++]))
-				return -EFAULT;
-		}
-	}
-	while (count > 0) {
-		unsigned long psr;
-
-		if (kbuf)
-			reg = *k++;
-		else if (get_user(reg, u++))
-			return -EFAULT;
-
-		switch (pos) {
-		case 32: /* PSR */
-			psr = regs->psr;
-			psr &= ~(PSR_ICC | PSR_SYSCALL);
-			psr |= (reg & (PSR_ICC | PSR_SYSCALL));
-			regs->psr = psr;
-			break;
-		case 33: /* PC */
-			regs->pc = reg;
-			break;
-		case 34: /* NPC */
-			regs->npc = reg;
-			break;
-		case 35: /* Y */
-			regs->y = reg;
-			break;
-		case 36: /* WIM */
-		case 37: /* TBR */
-			break;
-		default:
-			goto finish;
-		}
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 regs->u_regs,
+				 0, 16 * sizeof(u32));
+	if (ret || !count)
+		return ret;
 
-		pos++;
-		count--;
+	if (pos < 32 * sizeof(u32)) {
+		if (regwindow32_get(target, regs, uregs))
+			return -EFAULT;
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+					 uregs,
+					 16 * sizeof(u32), 32 * sizeof(u32));
+		if (ret)
+			return ret;
+		if (regwindow32_set(target, regs, uregs))
+			return -EFAULT;
+		if (!count)
+			return 0;
 	}
-finish:
-	pos *= sizeof(reg);
-	count *= sizeof(reg);
-
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &psr,
+				 32 * sizeof(u32), 33 * sizeof(u32));
+	if (ret)
+		return ret;
+	regs->psr = (regs->psr & ~(PSR_ICC | PSR_SYSCALL)) |
+		    (psr & (PSR_ICC | PSR_SYSCALL));
+	if (!count)
+		return 0;
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &regs->pc,
+				 33 * sizeof(u32), 34 * sizeof(u32));
+	if (ret || !count)
+		return ret;
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &regs->y,
+				 34 * sizeof(u32), 35 * sizeof(u32));
+	if (ret || !count)
+		return ret;
 	return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
-					 38 * sizeof(reg), -1);
+					 35 * sizeof(u32), 38 * sizeof(u32));
 }
 
 static int fpregs32_get(struct task_struct *target,

[PATCH 5.4 218/261] sparc64: fix misuses of access_process_vm() in genregs32_[sg]et()

[Greg Kroah-Hartman]

From: Al Viro <viro@zeniv.linux.org.uk>

commit 142cd25293f6a7ecbdff4fb0af17de6438d46433 upstream.

We do need access_process_vm() to access the target's reg_window.
However, access to caller's memory (storing the result in
genregs32_get(), fetching the new values in case of genregs32_set())
should be done by normal uaccess primitives.

Fixes: ad4f95764040 ([SPARC64]: Fix user accesses in regset code.)
Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/sparc/kernel/ptrace_64.c |   17 +++--------------
 1 file changed, 3 insertions(+), 14 deletions(-)

--- a/arch/sparc/kernel/ptrace_64.c
+++ b/arch/sparc/kernel/ptrace_64.c
@@ -572,19 +572,13 @@ static int genregs32_get(struct task_str
 			for (; count > 0 && pos < 32; count--) {
 				if (access_process_vm(target,
 						      (unsigned long)
-						      &reg_window[pos],
+						      &reg_window[pos++],
 						      &reg, sizeof(reg),
 						      FOLL_FORCE)
 				    != sizeof(reg))
 					return -EFAULT;
-				if (access_process_vm(target,
-						      (unsigned long) u,
-						      &reg, sizeof(reg),
-						      FOLL_FORCE | FOLL_WRITE)
-				    != sizeof(reg))
+				if (put_user(reg, u++))
 					return -EFAULT;
-				pos++;
-				u++;
 			}
 		}
 	}
@@ -684,12 +678,7 @@ static int genregs32_set(struct task_str
 			}
 		} else {
 			for (; count > 0 && pos < 32; count--) {
-				if (access_process_vm(target,
-						      (unsigned long)
-						      u,
-						      &reg, sizeof(reg),
-						      FOLL_FORCE)
-				    != sizeof(reg))
+				if (get_user(reg, u++))
 					return -EFAULT;
 				if (access_process_vm(target,
 						      (unsigned long)

[PATCH 5.4 219/261] dm crypt: avoid truncating the logical block size

[Greg Kroah-Hartman]

From: Eric Biggers <ebiggers@google.com>

commit 64611a15ca9da91ff532982429c44686f4593b5f upstream.

queue_limits::logical_block_size got changed from unsigned short to
unsigned int, but it was forgotten to update crypt_io_hints() to use the
new type.  Fix it.

Fixes: ad6bf88a6c19 ("block: fix an integer overflow in logical block size")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-crypt.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -2957,7 +2957,7 @@ static void crypt_io_hints(struct dm_tar
 	limits->max_segment_size = PAGE_SIZE;
 
 	limits->logical_block_size =
-		max_t(unsigned short, limits->logical_block_size, cc->sector_size);
+		max_t(unsigned, limits->logical_block_size, cc->sector_size);
 	limits->physical_block_size =
 		max_t(unsigned, limits->physical_block_size, cc->sector_size);
 	limits->io_min = max_t(unsigned, limits->io_min, cc->sector_size);

[PATCH 5.4 220/261] alpha: fix memory barriers so that they conform to the specification

[Greg Kroah-Hartman]

From: Mikulas Patocka <mpatocka@redhat.com>

commit 54505a1e2083fc54cbe8779b97479f969cd30a00 upstream.

The commits cd0e00c10672 and 92d7223a7423 broke boot on the Alpha Avanti
platform. The patches move memory barriers after a write before the write.
The result is that if there's iowrite followed by ioread, there is no
barrier between them.

The Alpha architecture allows reordering of the accesses to the I/O space,
and the missing barrier between write and read causes hang with serial
port and real time clock.

This patch makes barriers confiorm to the specification.

1. We add mb() before readX_relaxed and writeX_relaxed -
   memory-barriers.txt claims that these functions must be ordered w.r.t.
   each other. Alpha doesn't order them, so we need an explicit barrier.
2. We add mb() before reads from the I/O space - so that if there's a
   write followed by a read, there should be a barrier between them.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: cd0e00c10672 ("alpha: io: reorder barriers to guarantee writeX() and iowriteX() ordering")
Fixes: 92d7223a7423 ("alpha: io: reorder barriers to guarantee writeX() and iowriteX() ordering #2")
Cc: stable@vger.kernel.org      # v4.17+
Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/alpha/include/asm/io.h |   74 +++++++++++++++++++++++++++++++++++---------
 arch/alpha/kernel/io.c      |   60 +++++++++++++++++++++++++++++++----
 2 files changed, 112 insertions(+), 22 deletions(-)

--- a/arch/alpha/include/asm/io.h
+++ b/arch/alpha/include/asm/io.h
@@ -322,14 +322,18 @@ static inline int __is_mmio(const volati
 #if IO_CONCAT(__IO_PREFIX,trivial_io_bw)
 extern inline unsigned int ioread8(void __iomem *addr)
 {
-	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread8)(addr);
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread8)(addr);
 	mb();
 	return ret;
 }
 
 extern inline unsigned int ioread16(void __iomem *addr)
 {
-	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread16)(addr);
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread16)(addr);
 	mb();
 	return ret;
 }
@@ -370,7 +374,9 @@ extern inline void outw(u16 b, unsigned
 #if IO_CONCAT(__IO_PREFIX,trivial_io_lq)
 extern inline unsigned int ioread32(void __iomem *addr)
 {
-	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread32)(addr);
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread32)(addr);
 	mb();
 	return ret;
 }
@@ -415,14 +421,18 @@ extern inline void __raw_writew(u16 b, v
 
 extern inline u8 readb(const volatile void __iomem *addr)
 {
-	u8 ret = __raw_readb(addr);
+	u8 ret;
+	mb();
+	ret = __raw_readb(addr);
 	mb();
 	return ret;
 }
 
 extern inline u16 readw(const volatile void __iomem *addr)
 {
-	u16 ret = __raw_readw(addr);
+	u16 ret;
+	mb();
+	ret = __raw_readw(addr);
 	mb();
 	return ret;
 }
@@ -463,14 +473,18 @@ extern inline void __raw_writeq(u64 b, v
 
 extern inline u32 readl(const volatile void __iomem *addr)
 {
-	u32 ret = __raw_readl(addr);
+	u32 ret;
+	mb();
+	ret = __raw_readl(addr);
 	mb();
 	return ret;
 }
 
 extern inline u64 readq(const volatile void __iomem *addr)
 {
-	u64 ret = __raw_readq(addr);
+	u64 ret;
+	mb();
+	ret = __raw_readq(addr);
 	mb();
 	return ret;
 }
@@ -499,14 +513,44 @@ extern inline void writeq(u64 b, volatil
 #define outb_p		outb
 #define outw_p		outw
 #define outl_p		outl
-#define readb_relaxed(addr)	__raw_readb(addr)
-#define readw_relaxed(addr)	__raw_readw(addr)
-#define readl_relaxed(addr)	__raw_readl(addr)
-#define readq_relaxed(addr)	__raw_readq(addr)
-#define writeb_relaxed(b, addr)	__raw_writeb(b, addr)
-#define writew_relaxed(b, addr)	__raw_writew(b, addr)
-#define writel_relaxed(b, addr)	__raw_writel(b, addr)
-#define writeq_relaxed(b, addr)	__raw_writeq(b, addr)
+
+extern u8 readb_relaxed(const volatile void __iomem *addr);
+extern u16 readw_relaxed(const volatile void __iomem *addr);
+extern u32 readl_relaxed(const volatile void __iomem *addr);
+extern u64 readq_relaxed(const volatile void __iomem *addr);
+
+#if IO_CONCAT(__IO_PREFIX,trivial_io_bw)
+extern inline u8 readb_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readb(addr);
+}
+
+extern inline u16 readw_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readw(addr);
+}
+#endif
+
+#if IO_CONCAT(__IO_PREFIX,trivial_io_lq)
+extern inline u32 readl_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readl(addr);
+}
+
+extern inline u64 readq_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readq(addr);
+}
+#endif
+
+#define writeb_relaxed	writeb
+#define writew_relaxed	writew
+#define writel_relaxed	writel
+#define writeq_relaxed	writeq
 
 /*
  * String version of IO memory access ops:
--- a/arch/alpha/kernel/io.c
+++ b/arch/alpha/kernel/io.c
@@ -16,21 +16,27 @@
 unsigned int
 ioread8(void __iomem *addr)
 {
-	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread8)(addr);
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread8)(addr);
 	mb();
 	return ret;
 }
 
 unsigned int ioread16(void __iomem *addr)
 {
-	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread16)(addr);
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread16)(addr);
 	mb();
 	return ret;
 }
 
 unsigned int ioread32(void __iomem *addr)
 {
-	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread32)(addr);
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread32)(addr);
 	mb();
 	return ret;
 }
@@ -148,28 +154,36 @@ EXPORT_SYMBOL(__raw_writeq);
 
 u8 readb(const volatile void __iomem *addr)
 {
-	u8 ret = __raw_readb(addr);
+	u8 ret;
+	mb();
+	ret = __raw_readb(addr);
 	mb();
 	return ret;
 }
 
 u16 readw(const volatile void __iomem *addr)
 {
-	u16 ret = __raw_readw(addr);
+	u16 ret;
+	mb();
+	ret = __raw_readw(addr);
 	mb();
 	return ret;
 }
 
 u32 readl(const volatile void __iomem *addr)
 {
-	u32 ret = __raw_readl(addr);
+	u32 ret;
+	mb();
+	ret = __raw_readl(addr);
 	mb();
 	return ret;
 }
 
 u64 readq(const volatile void __iomem *addr)
 {
-	u64 ret = __raw_readq(addr);
+	u64 ret;
+	mb();
+	ret = __raw_readq(addr);
 	mb();
 	return ret;
 }
@@ -207,6 +221,38 @@ EXPORT_SYMBOL(writew);
 EXPORT_SYMBOL(writel);
 EXPORT_SYMBOL(writeq);
 
+/*
+ * The _relaxed functions must be ordered w.r.t. each other, but they don't
+ * have to be ordered w.r.t. other memory accesses.
+ */
+u8 readb_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readb(addr);
+}
+
+u16 readw_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readw(addr);
+}
+
+u32 readl_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readl(addr);
+}
+
+u64 readq_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readq(addr);
+}
+
+EXPORT_SYMBOL(readb_relaxed);
+EXPORT_SYMBOL(readw_relaxed);
+EXPORT_SYMBOL(readl_relaxed);
+EXPORT_SYMBOL(readq_relaxed);
 
 /*
  * Read COUNT 8-bit bytes from port PORT into memory starting at SRC.

[PATCH 5.4 221/261] powerpc/fadump: use static allocation for reserved memory ranges

[Greg Kroah-Hartman]

From: Hari Bathini <hbathini@linux.ibm.com>

commit 02c04e374e176ae3a3f64a682f80702f8d2fb65d upstream.

At times, memory ranges have to be looked up during early boot, when
kernel couldn't be initialized for dynamic memory allocation. In fact,
reserved-ranges look up is needed during FADump memory reservation.
Without accounting for reserved-ranges in reserving memory for FADump,
MPIPL boot fails with memory corruption issues. So, extend memory
ranges handling to support static allocation and populate reserved
memory ranges during early boot.

Fixes: dda9dbfeeb7a ("powerpc/fadump: consider reserved ranges while releasing memory")
Cc: stable@vger.kernel.org
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/158737294432.26700.4830263187856221314.stgit@hbathini.in.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/fadump-internal.h |    4 +
 arch/powerpc/kernel/fadump.c               |   77 ++++++++++++++++-------------
 2 files changed, 48 insertions(+), 33 deletions(-)

--- a/arch/powerpc/include/asm/fadump-internal.h
+++ b/arch/powerpc/include/asm/fadump-internal.h
@@ -64,12 +64,14 @@ struct fadump_memory_range {
 };
 
 /* fadump memory ranges info */
+#define RNG_NAME_SZ			16
 struct fadump_mrange_info {
-	char				name[16];
+	char				name[RNG_NAME_SZ];
 	struct fadump_memory_range	*mem_ranges;
 	u32				mem_ranges_sz;
 	u32				mem_range_cnt;
 	u32				max_mem_ranges;
+	bool				is_static;
 };
 
 /* Platform specific callback functions */
--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -38,8 +38,17 @@ static void __init fadump_reserve_crash_
 
 #ifndef CONFIG_PRESERVE_FA_DUMP
 static DEFINE_MUTEX(fadump_mutex);
-struct fadump_mrange_info crash_mrange_info = { "crash", NULL, 0, 0, 0 };
-struct fadump_mrange_info reserved_mrange_info = { "reserved", NULL, 0, 0, 0 };
+struct fadump_mrange_info crash_mrange_info = { "crash", NULL, 0, 0, 0, false };
+
+#define RESERVED_RNGS_SZ	16384 /* 16K - 128 entries */
+#define RESERVED_RNGS_CNT	(RESERVED_RNGS_SZ / \
+				 sizeof(struct fadump_memory_range))
+static struct fadump_memory_range rngs[RESERVED_RNGS_CNT];
+struct fadump_mrange_info reserved_mrange_info = { "reserved", rngs,
+						   RESERVED_RNGS_SZ, 0,
+						   RESERVED_RNGS_CNT, true };
+
+static void __init early_init_dt_scan_reserved_ranges(unsigned long node);
 
 #ifdef CONFIG_CMA
 static struct cma *fadump_cma;
@@ -108,6 +117,11 @@ static int __init fadump_cma_init(void)
 int __init early_init_dt_scan_fw_dump(unsigned long node, const char *uname,
 				      int depth, void *data)
 {
+	if (depth == 0) {
+		early_init_dt_scan_reserved_ranges(node);
+		return 0;
+	}
+
 	if (depth != 1)
 		return 0;
 
@@ -726,10 +740,14 @@ void fadump_free_cpu_notes_buf(void)
 
 static void fadump_free_mem_ranges(struct fadump_mrange_info *mrange_info)
 {
+	if (mrange_info->is_static) {
+		mrange_info->mem_range_cnt = 0;
+		return;
+	}
+
 	kfree(mrange_info->mem_ranges);
-	mrange_info->mem_ranges = NULL;
-	mrange_info->mem_ranges_sz = 0;
-	mrange_info->max_mem_ranges = 0;
+	memset((void *)((u64)mrange_info + RNG_NAME_SZ), 0,
+	       (sizeof(struct fadump_mrange_info) - RNG_NAME_SZ));
 }
 
 /*
@@ -786,6 +804,12 @@ static inline int fadump_add_mem_range(s
 		if (mrange_info->mem_range_cnt == mrange_info->max_mem_ranges) {
 			int ret;
 
+			if (mrange_info->is_static) {
+				pr_err("Reached array size limit for %s memory ranges\n",
+				       mrange_info->name);
+				return -ENOSPC;
+			}
+
 			ret = fadump_alloc_mem_ranges(mrange_info);
 			if (ret)
 				return ret;
@@ -1202,20 +1226,19 @@ static void sort_and_merge_mem_ranges(st
  * Scan reserved-ranges to consider them while reserving/releasing
  * memory for FADump.
  */
-static inline int fadump_scan_reserved_mem_ranges(void)
+static void __init early_init_dt_scan_reserved_ranges(unsigned long node)
 {
-	struct device_node *root;
 	const __be32 *prop;
 	int len, ret = -1;
 	unsigned long i;
 
-	root = of_find_node_by_path("/");
-	if (!root)
-		return ret;
+	/* reserved-ranges already scanned */
+	if (reserved_mrange_info.mem_range_cnt != 0)
+		return;
 
-	prop = of_get_property(root, "reserved-ranges", &len);
+	prop = of_get_flat_dt_prop(node, "reserved-ranges", &len);
 	if (!prop)
-		return ret;
+		return;
 
 	/*
 	 * Each reserved range is an (address,size) pair, 2 cells each,
@@ -1237,7 +1260,8 @@ static inline int fadump_scan_reserved_m
 		}
 	}
 
-	return ret;
+	/* Compact reserved ranges */
+	sort_and_merge_mem_ranges(&reserved_mrange_info);
 }
 
 /*
@@ -1251,32 +1275,21 @@ static void fadump_release_memory(u64 be
 	u64 ra_start, ra_end, tstart;
 	int i, ret;
 
-	fadump_scan_reserved_mem_ranges();
-
 	ra_start = fw_dump.reserve_dump_area_start;
 	ra_end = ra_start + fw_dump.reserve_dump_area_size;
 
 	/*
-	 * Add reserved dump area to reserved ranges list
-	 * and exclude all these ranges while releasing memory.
+	 * If reserved ranges array limit is hit, overwrite the last reserved
+	 * memory range with reserved dump area to ensure it is excluded from
+	 * the memory being released (reused for next FADump registration).
 	 */
-	ret = fadump_add_mem_range(&reserved_mrange_info, ra_start, ra_end);
-	if (ret != 0) {
-		/*
-		 * Not enough memory to setup reserved ranges but the system is
-		 * running shortage of memory. So, release all the memory except
-		 * Reserved dump area (reused for next fadump registration).
-		 */
-		if (begin < ra_end && end > ra_start) {
-			if (begin < ra_start)
-				fadump_release_reserved_area(begin, ra_start);
-			if (end > ra_end)
-				fadump_release_reserved_area(ra_end, end);
-		} else
-			fadump_release_reserved_area(begin, end);
+	if (reserved_mrange_info.mem_range_cnt ==
+	    reserved_mrange_info.max_mem_ranges)
+		reserved_mrange_info.mem_range_cnt--;
 
+	ret = fadump_add_mem_range(&reserved_mrange_info, ra_start, ra_end);
+	if (ret != 0)
 		return;
-	}
 
 	/* Get the reserved ranges list in order first. */
 	sort_and_merge_mem_ranges(&reserved_mrange_info);

[PATCH 5.4 222/261] powerpc/fadump: consider reserved ranges while reserving memory

[Greg Kroah-Hartman]

From: Hari Bathini <hbathini@linux.ibm.com>

commit 140777a3d8dfdb3d3f20ea7707c0f1c0ce1b0aa5 upstream.

Commit 0962e8004e97 ("powerpc/prom: Scan reserved-ranges node for
memory reservations") enabled support to parse reserved-ranges DT
node and reserve kernel memory falling in these ranges for F/W
purposes. Memory reserved for FADump should not overlap with these
ranges as it could corrupt memory meant for F/W or crash'ed kernel
memory to be exported as vmcore.

But since commit 579ca1a27675 ("powerpc/fadump: make use of memblock's
bottom up allocation mode"), memblock_find_in_range() is being used to
find the appropriate area to reserve memory for FADump, which can't
account for reserved-ranges as these ranges are reserved only after
FADump memory reservation.

With reserved-ranges now being populated during early boot, look out
for these memory ranges while reserving memory for FADump. Without
this change, MPIPL on PowerNV systems aborts with hostboot failure,
when memory reserved for FADump is less than 4096MB.

Fixes: 579ca1a27675 ("powerpc/fadump: make use of memblock's bottom up allocation mode")
Cc: stable@vger.kernel.org
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/158737297693.26700.16193820746269425424.stgit@hbathini.in.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/fadump.c |   76 +++++++++++++++++++++++++++++++++++++------
 1 file changed, 67 insertions(+), 9 deletions(-)

--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -443,10 +443,72 @@ static int __init fadump_get_boot_mem_re
 	return ret;
 }
 
+/*
+ * Returns true, if the given range overlaps with reserved memory ranges
+ * starting at idx. Also, updates idx to index of overlapping memory range
+ * with the given memory range.
+ * False, otherwise.
+ */
+static bool overlaps_reserved_ranges(u64 base, u64 end, int *idx)
+{
+	bool ret = false;
+	int i;
+
+	for (i = *idx; i < reserved_mrange_info.mem_range_cnt; i++) {
+		u64 rbase = reserved_mrange_info.mem_ranges[i].base;
+		u64 rend = rbase + reserved_mrange_info.mem_ranges[i].size;
+
+		if (end <= rbase)
+			break;
+
+		if ((end > rbase) &&  (base < rend)) {
+			*idx = i;
+			ret = true;
+			break;
+		}
+	}
+
+	return ret;
+}
+
+/*
+ * Locate a suitable memory area to reserve memory for FADump. While at it,
+ * lookup reserved-ranges & avoid overlap with them, as they are used by F/W.
+ */
+static u64 __init fadump_locate_reserve_mem(u64 base, u64 size)
+{
+	struct fadump_memory_range *mrngs;
+	phys_addr_t mstart, mend;
+	int idx = 0;
+	u64 i, ret = 0;
+
+	mrngs = reserved_mrange_info.mem_ranges;
+	for_each_free_mem_range(i, NUMA_NO_NODE, MEMBLOCK_NONE,
+				&mstart, &mend, NULL) {
+		pr_debug("%llu) mstart: %llx, mend: %llx, base: %llx\n",
+			 i, mstart, mend, base);
+
+		if (mstart > base)
+			base = PAGE_ALIGN(mstart);
+
+		while ((mend > base) && ((mend - base) >= size)) {
+			if (!overlaps_reserved_ranges(base, base+size, &idx)) {
+				ret = base;
+				goto out;
+			}
+
+			base = mrngs[idx].base + mrngs[idx].size;
+			base = PAGE_ALIGN(base);
+		}
+	}
+
+out:
+	return ret;
+}
+
 int __init fadump_reserve_mem(void)
 {
-	u64 base, size, mem_boundary, bootmem_min, align = PAGE_SIZE;
-	bool is_memblock_bottom_up = memblock_bottom_up();
+	u64 base, size, mem_boundary, bootmem_min;
 	int ret = 1;
 
 	if (!fw_dump.fadump_enabled)
@@ -467,9 +529,9 @@ int __init fadump_reserve_mem(void)
 			PAGE_ALIGN(fadump_calculate_reserve_size());
 #ifdef CONFIG_CMA
 		if (!fw_dump.nocma) {
-			align = FADUMP_CMA_ALIGNMENT;
 			fw_dump.boot_memory_size =
-				ALIGN(fw_dump.boot_memory_size, align);
+				ALIGN(fw_dump.boot_memory_size,
+				      FADUMP_CMA_ALIGNMENT);
 		}
 #endif
 
@@ -537,11 +599,7 @@ int __init fadump_reserve_mem(void)
 		 * Reserve memory at an offset closer to bottom of the RAM to
 		 * minimize the impact of memory hot-remove operation.
 		 */
-		memblock_set_bottom_up(true);
-		base = memblock_find_in_range(base, mem_boundary, size, align);
-
-		/* Restore the previous allocation mode */
-		memblock_set_bottom_up(is_memblock_bottom_up);
+		base = fadump_locate_reserve_mem(base, size);
 
 		if (!base) {
 			pr_err("Failed to find memory chunk for reservation!\n");

[PATCH 5.4 223/261] powerpc/fadump: Account for memory_limit while reserving memory

[Greg Kroah-Hartman]

From: Hari Bathini <hbathini@linux.ibm.com>

commit 9a2921e5baca1d25eb8d21f21d1e90581a6d0f68 upstream.

If the memory chunk found for reserving memory overshoots the memory
limit imposed, do not proceed with reserving memory. Default behavior
was this until commit 140777a3d8df ("powerpc/fadump: consider reserved
ranges while reserving memory") changed it unwittingly.

Fixes: 140777a3d8df ("powerpc/fadump: consider reserved ranges while reserving memory")
Cc: stable@vger.kernel.org
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159057266320.22331.6571453892066907320.stgit@hbathini.in.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/fadump.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -601,7 +601,7 @@ int __init fadump_reserve_mem(void)
 		 */
 		base = fadump_locate_reserve_mem(base, size);
 
-		if (!base) {
+		if (!base || (base + size > mem_boundary)) {
 			pr_err("Failed to find memory chunk for reservation!\n");
 			goto error_out;
 		}

[PATCH 5.4 224/261] kernel/cpu_pm: Fix uninitted local in cpu_pm

[Greg Kroah-Hartman]

From: Douglas Anderson <dianders@chromium.org>

commit b5945214b76a1f22929481724ffd448000ede914 upstream.

cpu_pm_notify() is basically a wrapper of notifier_call_chain().
notifier_call_chain() doesn't initialize *nr_calls to 0 before it
starts incrementing it--presumably it's up to the callers to do this.

Unfortunately the callers of cpu_pm_notify() don't init *nr_calls.
This potentially means you could get too many or two few calls to
CPU_PM_ENTER_FAILED or CPU_CLUSTER_PM_ENTER_FAILED depending on the
luck of the stack.

Let's fix this.

Fixes: ab10023e0088 ("cpu_pm: Add cpu power management notifiers")
Cc: stable@vger.kernel.org
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200504104917.v6.3.I2d44fc0053d019f239527a4e5829416714b7e299@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/cpu_pm.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/cpu_pm.c
+++ b/kernel/cpu_pm.c
@@ -80,7 +80,7 @@ EXPORT_SYMBOL_GPL(cpu_pm_unregister_noti
  */
 int cpu_pm_enter(void)
 {
-	int nr_calls;
+	int nr_calls = 0;
 	int ret = 0;
 
 	ret = cpu_pm_notify(CPU_PM_ENTER, -1, &nr_calls);
@@ -131,7 +131,7 @@ EXPORT_SYMBOL_GPL(cpu_pm_exit);
  */
 int cpu_cluster_pm_enter(void)
 {
-	int nr_calls;
+	int nr_calls = 0;
 	int ret = 0;
 
 	ret = cpu_pm_notify(CPU_CLUSTER_PM_ENTER, -1, &nr_calls);

[PATCH 5.4 225/261] ARM: tegra: Correct PL310 Auxiliary Control Register initialization

[Greg Kroah-Hartman]

From: Dmitry Osipenko <digetx@gmail.com>

commit 35509737c8f958944e059d501255a0bf18361ba0 upstream.

The PL310 Auxiliary Control Register shouldn't have the "Full line of
zero" optimization bit being set before L2 cache is enabled. The L2X0
driver takes care of enabling the optimization by itself.

This patch fixes a noisy error message on Tegra20 and Tegra30 telling
that cache optimization is erroneously enabled without enabling it for
the CPU:

	L2C-310: enabling full line of zeros but not enabled in Cortex-A9

Cc: <stable@vger.kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-tegra/tegra.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
@@ -106,8 +106,8 @@ static const char * const tegra_dt_board
 };
 
 DT_MACHINE_START(TEGRA_DT, "NVIDIA Tegra SoC (Flattened Device Tree)")
-	.l2c_aux_val	= 0x3c400001,
-	.l2c_aux_mask	= 0xc20fc3fe,
+	.l2c_aux_val	= 0x3c400000,
+	.l2c_aux_mask	= 0xc20fc3ff,
 	.smp		= smp_ops(tegra_smp_ops),
 	.map_io		= tegra_map_common_io,
 	.init_early	= tegra_init_early,

[PATCH 5.4 226/261] soc/tegra: pmc: Select GENERIC_PINCONF

[Greg Kroah-Hartman]

From: Corentin Labbe <clabbe@baylibre.com>

commit 5098e2b95e8e6f56266c2d5c180c75917090082a upstream.

I have hit the following build error:
armv7a-hardfloat-linux-gnueabi-ld: drivers/soc/tegra/pmc.o: in function `pinconf_generic_dt_node_to_map_pin':
pmc.c:(.text+0x500): undefined reference to `pinconf_generic_dt_node_to_map'
armv7a-hardfloat-linux-gnueabi-ld: drivers/soc/tegra/pmc.o:(.rodata+0x1f88): undefined reference to `pinconf_generic_dt_free_map'

So SOC_TEGRA_PMC should select GENERIC_PINCONF.

Fixes: 4a37f11c8f57 ("soc/tegra: pmc: Implement pad configuration via pinctrl")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/soc/tegra/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/soc/tegra/Kconfig
+++ b/drivers/soc/tegra/Kconfig
@@ -130,6 +130,7 @@ config SOC_TEGRA_FLOWCTRL
 
 config SOC_TEGRA_PMC
 	bool
+	select GENERIC_PINCONF
 
 config SOC_TEGRA_POWERGATE_BPMP
 	def_bool y

[PATCH 5.4 227/261] ARM: dts: exynos: Fix GPIO polarity for thr GalaxyS3 CM36651 sensors bus

[Greg Kroah-Hartman]

From: Marek Szyprowski <m.szyprowski@samsung.com>

commit 8807d356bfea92b0a8f04ce421800ed83400cd22 upstream.

GPIO lines for the CM36651 sensor I2C bus use the normal not the inverted
polarity. This bug has been there since adding the CM36651 sensor by
commit 85cb4e0bd229 ("ARM: dts: add cm36651 light/proximity sensor node
for exynos4412-trats2"), but went unnoticed because the "i2c-gpio"
driver ignored the GPIO polarity specified in the device-tree.

The recent conversion of "i2c-gpio" driver to the new, descriptor based
GPIO API, automatically made it the DT-specified polarity aware, what
broke the CM36651 sensor operation.

Fixes: 85cb4e0bd229 ("ARM: dts: add cm36651 light/proximity sensor node for exynos4412-trats2")
CC: stable@vger.kernel.org # 4.16+
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
+++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
@@ -68,7 +68,7 @@
 
 	i2c_cm36651: i2c-gpio-2 {
 		compatible = "i2c-gpio";
-		gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>;
+		gpios = <&gpf0 0 GPIO_ACTIVE_HIGH>, <&gpf0 1 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;

[PATCH 5.4 228/261] ARM: dts: at91: sama5d2_ptc_ek: fix vbus pin

[Greg Kroah-Hartman]

From: Ludovic Desroches <ludovic.desroches@microchip.com>

commit baa998aecb75c04d62be0a4ab6b724af6d73a0f9 upstream.

The gpio property for the vbus pin doesn't match the pinctrl and is
not correct.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Fixes: 42ed535595ec "ARM: dts: at91: introduce the sama5d2 ptc ek board"
Cc: stable@vger.kernel.org # 4.19 and later
Link: https://lore.kernel.org/r/20200401221947.41502-1-ludovic.desroches@microchip.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -40,7 +40,7 @@
 
 	ahb {
 		usb0: gadget@300000 {
-			atmel,vbus-gpio = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
+			atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usba_vbus>;
 			status = "okay";

[PATCH 5.4 229/261] ARM: dts: s5pv210: Set keep-power-in-suspend for SDHCI1 on Aries

[Greg Kroah-Hartman]

From: Jonathan Bakker <xc-racer2@live.ca>

commit 869d42e6eba821905e1a0950623aadafe1a6e6d3 upstream.

SDHCI1 is connected to a BCM4329 WiFi/BT chip which requires
power to be kept over suspend.  As the surrounding hardware supports
this, mark it as such.  This fixes WiFi after a suspend/resume cycle.

Fixes: 170642468a51 ("ARM: dts: s5pv210: Add initial DTS for Samsung Aries based phones")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/s5pv210-aries.dtsi |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -454,6 +454,7 @@
 	pinctrl-names = "default";
 	cap-sd-highspeed;
 	cap-mmc-highspeed;
+	keep-power-in-suspend;
 
 	mmc-pwrseq = <&wifi_pwrseq>;
 	non-removable;

[PATCH 5.4 230/261] drivers/macintosh: Fix memleak in windfarm_pm112 driver

[Greg Kroah-Hartman]

From: Michael Ellerman <mpe@ellerman.id.au>

commit 93900337b9ac2f4eca427eff6d187be2dc3b5551 upstream.

create_cpu_loop() calls smu_sat_get_sdb_partition() which does
kmalloc() and returns the allocated buffer. In fact it's called twice,
and neither buffer is freed.

This results in a memory leak as reported by Erhard:
  unreferenced object 0xc00000047081f840 (size 32):
    comm "kwindfarm", pid 203, jiffies 4294880630 (age 5552.877s)
    hex dump (first 32 bytes):
      c8 06 02 7f ff 02 ff 01 fb bf 00 41 00 20 00 00  ...........A. ..
      00 07 89 37 00 a0 00 00 00 00 00 00 00 00 00 00  ...7............
    backtrace:
      [<0000000083f0a65c>] .smu_sat_get_sdb_partition+0xc4/0x2d0 [windfarm_smu_sat]
      [<000000003010fcb7>] .pm112_wf_notify+0x104c/0x13bc [windfarm_pm112]
      [<00000000b958b2dd>] .notifier_call_chain+0xa8/0x180
      [<0000000070490868>] .blocking_notifier_call_chain+0x64/0x90
      [<00000000131d8149>] .wf_thread_func+0x114/0x1a0
      [<000000000d54838d>] .kthread+0x13c/0x190
      [<00000000669b72bc>] .ret_from_kernel_thread+0x58/0x64
  unreferenced object 0xc0000004737089f0 (size 16):
    comm "kwindfarm", pid 203, jiffies 4294880879 (age 5552.050s)
    hex dump (first 16 bytes):
      c4 04 01 7f 22 11 e0 e6 ff 55 7b 12 ec 11 00 00  ...."....U{.....
    backtrace:
      [<0000000083f0a65c>] .smu_sat_get_sdb_partition+0xc4/0x2d0 [windfarm_smu_sat]
      [<00000000b94ef7e1>] .pm112_wf_notify+0x1294/0x13bc [windfarm_pm112]
      [<00000000b958b2dd>] .notifier_call_chain+0xa8/0x180
      [<0000000070490868>] .blocking_notifier_call_chain+0x64/0x90
      [<00000000131d8149>] .wf_thread_func+0x114/0x1a0
      [<000000000d54838d>] .kthread+0x13c/0x190
      [<00000000669b72bc>] .ret_from_kernel_thread+0x58/0x64

Fix it by rearranging the logic so we deal with each buffer
separately, which then makes it easy to free the buffer once we're
done with it.

Fixes: ac171c46667c ("[PATCH] powerpc: Thermal control for dual core G5s")
Cc: stable@vger.kernel.org # v2.6.16+
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Erhard F. <erhard_f@mailbox.org>
Link: https://lore.kernel.org/r/20200423060038.3308530-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/macintosh/windfarm_pm112.c |   21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

--- a/drivers/macintosh/windfarm_pm112.c
+++ b/drivers/macintosh/windfarm_pm112.c
@@ -132,14 +132,6 @@ static int create_cpu_loop(int cpu)
 	s32 tmax;
 	int fmin;
 
-	/* Get PID params from the appropriate SAT */
-	hdr = smu_sat_get_sdb_partition(chip, 0xC8 + core, NULL);
-	if (hdr == NULL) {
-		printk(KERN_WARNING"windfarm: can't get CPU PID fan config\n");
-		return -EINVAL;
-	}
-	piddata = (struct smu_sdbp_cpupiddata *)&hdr[1];
-
 	/* Get FVT params to get Tmax; if not found, assume default */
 	hdr = smu_sat_get_sdb_partition(chip, 0xC4 + core, NULL);
 	if (hdr) {
@@ -152,6 +144,16 @@ static int create_cpu_loop(int cpu)
 	if (tmax < cpu_all_tmax)
 		cpu_all_tmax = tmax;
 
+	kfree(hdr);
+
+	/* Get PID params from the appropriate SAT */
+	hdr = smu_sat_get_sdb_partition(chip, 0xC8 + core, NULL);
+	if (hdr == NULL) {
+		printk(KERN_WARNING"windfarm: can't get CPU PID fan config\n");
+		return -EINVAL;
+	}
+	piddata = (struct smu_sdbp_cpupiddata *)&hdr[1];
+
 	/*
 	 * Darwin has a minimum fan speed of 1000 rpm for the 4-way and
 	 * 515 for the 2-way.  That appears to be overkill, so for now,
@@ -174,6 +176,9 @@ static int create_cpu_loop(int cpu)
 		pid.min = fmin;
 
 	wf_cpu_pid_init(&cpu_pid[cpu], &pid);
+
+	kfree(hdr);
+
 	return 0;
 }
 

[PATCH 5.4 231/261] powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG

[Greg Kroah-Hartman]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

commit 74016701fe5f873ae23bf02835407227138d874d upstream.

'thread' doesn't exist in kuap_check() macro.

Use 'current' instead.

Fixes: a68c31fc01ef ("powerpc/32s: Implement Kernel Userspace Access Protection")
Cc: stable@vger.kernel.org
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b459e1600b969047a74e34251a84a3d6fdf1f312.1590858925.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/book3s/32/kup.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/powerpc/include/asm/book3s/32/kup.h
+++ b/arch/powerpc/include/asm/book3s/32/kup.h
@@ -2,6 +2,7 @@
 #ifndef _ASM_POWERPC_BOOK3S_32_KUP_H
 #define _ASM_POWERPC_BOOK3S_32_KUP_H
 
+#include <asm/bug.h>
 #include <asm/book3s/32/mmu-hash.h>
 
 #ifdef __ASSEMBLY__
@@ -75,7 +76,7 @@
 
 .macro kuap_check	current, gpr
 #ifdef CONFIG_PPC_KUAP_DEBUG
-	lwz	\gpr, KUAP(thread)
+	lwz	\gpr, THREAD + KUAP(\current)
 999:	twnei	\gpr, 0
 	EMIT_BUG_ENTRY 999b, __FILE__, __LINE__, (BUGFLAG_WARNING | BUGFLAG_ONCE)
 #endif

[PATCH 5.4 232/261] powerpc/kasan: Fix issues by lowering KASAN_SHADOW_END

[Greg Kroah-Hartman]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

commit 3a66a24f6060e6775f8c02ac52329ea0152d7e58 upstream.

At the time being, KASAN_SHADOW_END is 0x100000000, which
is 0 in 32 bits representation.

This leads to a couple of issues:
- kasan_remap_early_shadow_ro() does nothing because the comparison
k_cur < k_end is always false.
- In ptdump, address comparison for markers display fails and the
marker's name is printed at the start of the KASAN area instead of
being printed at the end.

However, there is no need to shadow the KASAN shadow area itself,
so the KASAN shadow area can stop shadowing memory at the start
of itself.

With a PAGE_OFFSET set to 0xc0000000, KASAN shadow area is then going
from 0xf8000000 to 0xff000000.

Fixes: cbd18991e24f ("powerpc/mm: Fix an Oops in kasan_mmu_init()")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ae1a3c0d19a37410c209c3fc453634cfcc0ee318.1589866984.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/kasan.h |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/arch/powerpc/include/asm/kasan.h
+++ b/arch/powerpc/include/asm/kasan.h
@@ -23,9 +23,7 @@
 
 #define KASAN_SHADOW_OFFSET	ASM_CONST(CONFIG_KASAN_SHADOW_OFFSET)
 
-#define KASAN_SHADOW_END	0UL
-
-#define KASAN_SHADOW_SIZE	(KASAN_SHADOW_END - KASAN_SHADOW_START)
+#define KASAN_SHADOW_END	(-(-KASAN_SHADOW_START >> KASAN_SHADOW_SCALE_SHIFT))
 
 #ifdef CONFIG_KASAN
 void kasan_early_init(void);

[PATCH 5.4 233/261] powerpc/kasan: Fix shadow pages allocation failure

[Greg Kroah-Hartman]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

commit d2a91cef9bbdeb87b7449fdab1a6be6000930210 upstream.

Doing kasan pages allocation in MMU_init is too early, kernel doesn't
have access yet to the entire memory space and memblock_alloc() fails
when the kernel is a bit big.

Do it from kasan_init() instead.

Fixes: 2edb16efc899 ("powerpc/32: Add KASAN support")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c24163ee5d5f8cdf52fefa45055ceb35435b8f15.1589866984.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/kasan.h      |    2 --
 arch/powerpc/mm/init_32.c             |    2 --
 arch/powerpc/mm/kasan/kasan_init_32.c |    4 +++-
 3 files changed, 3 insertions(+), 5 deletions(-)

--- a/arch/powerpc/include/asm/kasan.h
+++ b/arch/powerpc/include/asm/kasan.h
@@ -27,11 +27,9 @@
 
 #ifdef CONFIG_KASAN
 void kasan_early_init(void);
-void kasan_mmu_init(void);
 void kasan_init(void);
 #else
 static inline void kasan_init(void) { }
-static inline void kasan_mmu_init(void) { }
 #endif
 
 #endif /* __ASSEMBLY */
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -175,8 +175,6 @@ void __init MMU_init(void)
 	btext_unmap();
 #endif
 
-	kasan_mmu_init();
-
 	setup_kup();
 
 	/* Shortly after that, the entire linear mapping will be available */
--- a/arch/powerpc/mm/kasan/kasan_init_32.c
+++ b/arch/powerpc/mm/kasan/kasan_init_32.c
@@ -129,7 +129,7 @@ static void __init kasan_remap_early_sha
 	flush_tlb_kernel_range(KASAN_SHADOW_START, KASAN_SHADOW_END);
 }
 
-void __init kasan_mmu_init(void)
+static void __init kasan_mmu_init(void)
 {
 	int ret;
 	struct memblock_region *reg;
@@ -156,6 +156,8 @@ void __init kasan_mmu_init(void)
 
 void __init kasan_init(void)
 {
+	kasan_mmu_init();
+
 	kasan_remap_early_shadow_ro();
 
 	clear_page(kasan_early_shadow_page);

[PATCH 5.4 234/261] powerpc/32: Disable KASAN with pages bigger than 16k

[Greg Kroah-Hartman]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

commit 888468ce725a4cd56d72dc7e5096078f7a9251a0 upstream.

Mapping of early shadow area is implemented by using a single static
page table having all entries pointing to the same early shadow page.
The shadow area must therefore occupy full PGD entries.

The shadow area has a size of 128MB starting at 0xf8000000.
With 4k pages, a PGD entry is 4MB
With 16k pages, a PGD entry is 64MB
With 64k pages, a PGD entry is 1GB which is too big.

Until we rework the early shadow mapping, disable KASAN when the page
size is too big.

Fixes: 2edb16efc899 ("powerpc/32: Add KASAN support")
Cc: stable@vger.kernel.org # v5.2+
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7195fcde7314ccbf7a081b356084a69d421b10d4.1590660977.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -171,7 +171,7 @@ config PPC
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_HUGE_VMAP		if PPC_BOOK3S_64 && PPC_RADIX_MMU
 	select HAVE_ARCH_JUMP_LABEL
-	select HAVE_ARCH_KASAN			if PPC32
+	select HAVE_ARCH_KASAN			if PPC32 && PPC_PAGE_SHIFT <= 14
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_MMAP_RND_BITS
 	select HAVE_ARCH_MMAP_RND_COMPAT_BITS	if COMPAT

[PATCH 5.4 235/261] powerpc/64s: Dont let DT CPU features set FSCR_DSCR

[Greg Kroah-Hartman]

From: Michael Ellerman <mpe@ellerman.id.au>

commit 993e3d96fd08c3ebf7566e43be9b8cd622063e6d upstream.

The device tree CPU features binding includes FSCR bit numbers which
Linux is instructed to set by firmware.

Whether that's a good idea or not, in the case of the DSCR the Linux
implementation has a hard requirement that the FSCR_DSCR bit not be
set by default. We use it to track when a process reads/writes to
DSCR, so it must be clear to begin with.

So if firmware tells us to set FSCR_DSCR we must ignore it.

Currently this does not cause a bug in our DSCR handling because the
value of FSCR that the device tree CPU features code establishes is
only used by swapper. All other tasks use the value hard coded in
init_task.thread.fscr.

However we'd like to fix that in a future commit, at which point this
will become necessary.

Fixes: 5a61ef74f269 ("powerpc/64s: Support new device tree binding for discovering CPU features")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200527145843.2761782-2-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/dt_cpu_ftrs.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/arch/powerpc/kernel/dt_cpu_ftrs.c
+++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
@@ -346,6 +346,14 @@ static int __init feat_enable_dscr(struc
 {
 	u64 lpcr;
 
+	/*
+	 * Linux relies on FSCR[DSCR] being clear, so that we can take the
+	 * facility unavailable interrupt and track the task's usage of DSCR.
+	 * See facility_unavailable_exception().
+	 * Clear the bit here so that feat_enable() doesn't set it.
+	 */
+	f->fscr_bit_nr = -1;
+
 	feat_enable(f);
 
 	lpcr = mfspr(SPRN_LPCR);

[PATCH 5.4 236/261] powerpc/64s: Save FSCR to init_task.thread.fscr after feature init

[Greg Kroah-Hartman]

From: Michael Ellerman <mpe@ellerman.id.au>

commit 912c0a7f2b5daa3cbb2bc10f303981e493de73bd upstream.

At boot the FSCR is initialised via one of two paths. On most systems
it's set to a hard coded value in __init_FSCR().

On newer skiboot systems we use the device tree CPU features binding,
where firmware can tell Linux what bits to set in FSCR (and HFSCR).

In both cases the value that's configured at boot is not propagated
into the init_task.thread.fscr value prior to the initial fork of init
(pid 1), which means the value is not used by any processes other than
swapper (the idle task).

For the __init_FSCR() case this is OK, because the value in
init_task.thread.fscr is initialised to something sensible. However it
does mean that the value set in __init_FSCR() is not used other than
for swapper, which is odd and confusing.

The bigger problem is for the device tree CPU features case it
prevents firmware from setting (or clearing) FSCR bits for use by user
space. This means all existing kernels can not have features
enabled/disabled by firmware if those features require
setting/clearing FSCR bits.

We can handle both cases by saving the FSCR value into
init_task.thread.fscr after we have initialised it at boot. This fixes
the bug for device tree CPU features, and will allow us to simplify
the initialisation for the __init_FSCR() case in a future patch.

Fixes: 5a61ef74f269 ("powerpc/64s: Support new device tree binding for discovering CPU features")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200527145843.2761782-3-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/prom.c |   19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -685,6 +685,23 @@ static void __init tm_init(void)
 static void tm_init(void) { }
 #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
 
+#ifdef CONFIG_PPC64
+static void __init save_fscr_to_task(void)
+{
+	/*
+	 * Ensure the init_task (pid 0, aka swapper) uses the value of FSCR we
+	 * have configured via the device tree features or via __init_FSCR().
+	 * That value will then be propagated to pid 1 (init) and all future
+	 * processes.
+	 */
+	if (early_cpu_has_feature(CPU_FTR_ARCH_207S))
+		init_task.thread.fscr = mfspr(SPRN_FSCR);
+}
+#else
+static inline void save_fscr_to_task(void) {};
+#endif
+
+
 void __init early_init_devtree(void *params)
 {
 	phys_addr_t limit;
@@ -773,6 +790,8 @@ void __init early_init_devtree(void *par
 		BUG();
 	}
 
+	save_fscr_to_task();
+
 #if defined(CONFIG_SMP) && defined(CONFIG_PPC64)
 	/* We'll later wait for secondaries to check in; there are
 	 * NCPUS-1 non-boot CPUs  :-)

[PATCH 5.4 237/261] kbuild: force to build vmlinux if CONFIG_MODVERSION=y

[Greg Kroah-Hartman]

From: Masahiro Yamada <masahiroy@kernel.org>

commit 4b50c8c4eaf06a825d1c005c0b1b4a8307087b83 upstream.

This code does not work as stated in the comment.

$(CONFIG_MODVERSIONS) is always empty because it is expanded before
include/config/auto.conf is included. Hence, 'make modules' with
CONFIG_MODVERSION=y cannot record the version CRCs.

This has been broken since 2003, commit ("kbuild: Enable modules to be
build using the "make dir/" syntax"). [1]

[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=15c6240cdc44bbeef3c4797ec860f9765ef4f1a7
Cc: linux-stable <stable@vger.kernel.org> # v2.5.71+
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Makefile |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

--- a/Makefile
+++ b/Makefile
@@ -587,12 +587,8 @@ KBUILD_MODULES :=
 KBUILD_BUILTIN := 1
 
 # If we have only "make modules", don't compile built-in objects.
-# When we're building modules with modversions, we need to consider
-# the built-in objects during the descend as well, in order to
-# make sure the checksums are up to date before we record them.
-
 ifeq ($(MAKECMDGOALS),modules)
-  KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
+  KBUILD_BUILTIN :=
 endif
 
 # If we have "make <whatever> modules", compile modules
@@ -1282,6 +1278,13 @@ ifdef CONFIG_MODULES
 
 all: modules
 
+# When we're building modules with modversions, we need to consider
+# the built-in objects during the descend as well, in order to
+# make sure the checksums are up to date before we record them.
+ifdef CONFIG_MODVERSIONS
+  KBUILD_BUILTIN := 1
+endif
+
 # Build modules
 #
 # A module can be listed more than once in obj-m resulting in

[PATCH 5.4 238/261] sunrpc: svcauth_gss_register_pseudoflavor must reject duplicate registrations.

[Greg Kroah-Hartman]

From: NeilBrown <neilb@suse.de>

commit d47a5dc2888fd1b94adf1553068b8dad76cec96c upstream.

There is no valid case for supporting duplicate pseudoflavor
registrations.
Currently the silent acceptance of such registrations is hiding a bug.
The rpcsec_gss_krb5 module registers 2 flavours but does not unregister
them, so if you load, unload, reload the module, it will happily
continue to use the old registration which now has pointers to the
memory were the module was originally loaded.  This could lead to
unexpected results.

So disallow duplicate registrations.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=206651
Cc: stable@vger.kernel.org (v2.6.12+)
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/sunrpc/auth_gss/svcauth_gss.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -817,9 +817,11 @@ svcauth_gss_register_pseudoflavor(u32 ps
 	new->h.flavour = &svcauthops_gss;
 	new->pseudoflavor = pseudoflavor;
 
-	stat = 0;
 	test = auth_domain_lookup(name, &new->h);
-	if (test != &new->h) { /* Duplicate registration */
+	if (test != &new->h) {
+		pr_warn("svc: duplicate registration of gss pseudo flavour %s.\n",
+			name);
+		stat = -EADDRINUSE;
 		auth_domain_put(test);
 		kfree(new->h.name);
 		goto out_free_dom;

[PATCH 5.4 239/261] sunrpc: clean up properly in gss_mech_unregister()

[Greg Kroah-Hartman]

From: NeilBrown <neilb@suse.de>

commit 24c5efe41c29ee3e55bcf5a1c9f61ca8709622e8 upstream.

gss_mech_register() calls svcauth_gss_register_pseudoflavor() for each
flavour, but gss_mech_unregister() does not call auth_domain_put().
This is unbalanced and makes it impossible to reload the module.

Change svcauth_gss_register_pseudoflavor() to return the registered
auth_domain, and save it for later release.

Cc: stable@vger.kernel.org (v2.6.12+)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206651
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/sunrpc/gss_api.h        |    1 +
 include/linux/sunrpc/svcauth_gss.h    |    3 ++-
 net/sunrpc/auth_gss/gss_mech_switch.c |   12 +++++++++---
 net/sunrpc/auth_gss/svcauth_gss.c     |   12 ++++++------
 4 files changed, 18 insertions(+), 10 deletions(-)

--- a/include/linux/sunrpc/gss_api.h
+++ b/include/linux/sunrpc/gss_api.h
@@ -85,6 +85,7 @@ struct pf_desc {
 	u32	service;
 	char	*name;
 	char	*auth_domain_name;
+	struct auth_domain *domain;
 	bool	datatouch;
 };
 
--- a/include/linux/sunrpc/svcauth_gss.h
+++ b/include/linux/sunrpc/svcauth_gss.h
@@ -21,7 +21,8 @@ int gss_svc_init(void);
 void gss_svc_shutdown(void);
 int gss_svc_init_net(struct net *net);
 void gss_svc_shutdown_net(struct net *net);
-int svcauth_gss_register_pseudoflavor(u32 pseudoflavor, char * name);
+struct auth_domain *svcauth_gss_register_pseudoflavor(u32 pseudoflavor,
+						      char *name);
 u32 svcauth_gss_flavor(struct auth_domain *dom);
 
 #endif /* __KERNEL__ */
--- a/net/sunrpc/auth_gss/gss_mech_switch.c
+++ b/net/sunrpc/auth_gss/gss_mech_switch.c
@@ -36,6 +36,8 @@ gss_mech_free(struct gss_api_mech *gm)
 
 	for (i = 0; i < gm->gm_pf_num; i++) {
 		pf = &gm->gm_pfs[i];
+		if (pf->domain)
+			auth_domain_put(pf->domain);
 		kfree(pf->auth_domain_name);
 		pf->auth_domain_name = NULL;
 	}
@@ -58,6 +60,7 @@ make_auth_domain_name(char *name)
 static int
 gss_mech_svc_setup(struct gss_api_mech *gm)
 {
+	struct auth_domain *dom;
 	struct pf_desc *pf;
 	int i, status;
 
@@ -67,10 +70,13 @@ gss_mech_svc_setup(struct gss_api_mech *
 		status = -ENOMEM;
 		if (pf->auth_domain_name == NULL)
 			goto out;
-		status = svcauth_gss_register_pseudoflavor(pf->pseudoflavor,
-							pf->auth_domain_name);
-		if (status)
+		dom = svcauth_gss_register_pseudoflavor(
+			pf->pseudoflavor, pf->auth_domain_name);
+		if (IS_ERR(dom)) {
+			status = PTR_ERR(dom);
 			goto out;
+		}
+		pf->domain = dom;
 	}
 	return 0;
 out:
--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -800,7 +800,7 @@ u32 svcauth_gss_flavor(struct auth_domai
 
 EXPORT_SYMBOL_GPL(svcauth_gss_flavor);
 
-int
+struct auth_domain *
 svcauth_gss_register_pseudoflavor(u32 pseudoflavor, char * name)
 {
 	struct gss_domain	*new;
@@ -823,17 +823,17 @@ svcauth_gss_register_pseudoflavor(u32 ps
 			name);
 		stat = -EADDRINUSE;
 		auth_domain_put(test);
-		kfree(new->h.name);
-		goto out_free_dom;
+		goto out_free_name;
 	}
-	return 0;
+	return test;
 
+out_free_name:
+	kfree(new->h.name);
 out_free_dom:
 	kfree(new);
 out:
-	return stat;
+	return ERR_PTR(stat);
 }
-
 EXPORT_SYMBOL_GPL(svcauth_gss_register_pseudoflavor);
 
 static inline int

[PATCH 5.4 240/261] mtd: rawnand: Fix nand_gpio_waitrdy()

[Greg Kroah-Hartman]

From: Boris Brezillon <boris.brezillon@collabora.com>

commit e45a4b652dbd2f8b5a3b8e97e89f602a58cb28aa upstream.

Mimic what's done in nand_soft_waitrdy() and add one to the jiffies
timeout so we don't end up waiting less than actually required.

Reported-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Fixes: b0e137ad24b6c ("mtd: rawnand: Provide helper for polling GPIO R/B pin")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200518155237.297549-1-boris.brezillon@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/raw/nand_base.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -731,8 +731,14 @@ EXPORT_SYMBOL_GPL(nand_soft_waitrdy);
 int nand_gpio_waitrdy(struct nand_chip *chip, struct gpio_desc *gpiod,
 		      unsigned long timeout_ms)
 {
-	/* Wait until R/B pin indicates chip is ready or timeout occurs */
-	timeout_ms = jiffies + msecs_to_jiffies(timeout_ms);
+
+	/*
+	 * Wait until R/B pin indicates chip is ready or timeout occurs.
+	 * +1 below is necessary because if we are now in the last fraction
+	 * of jiffy and msecs_to_jiffies is 1 then we will wait only that
+	 * small jiffy fraction - possibly leading to false timeout.
+	 */
+	timeout_ms = jiffies + msecs_to_jiffies(timeout_ms) + 1;
 	do {
 		if (gpiod_get_value_cansleep(gpiod))
 			return 0;

[PATCH 5.4 241/261] mtd: rawnand: onfi: Fix redundancy detection check

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit 1d5d08ee9b28cff907326b4ad5a2463fd2808be1 upstream.

During ONFI detection, the CRC derived from the parameter page and the
CRC supposed to be at the end of the parameter page are compared. If
they do not match, the second then the third copies of the page are
tried.

The current implementation compares the newly derived CRC with the CRC
contained in the first page only. So if this particular CRC area has
been corrupted, then the detection will fail for a wrong reason.

Fix this issue by checking the derived CRC against the right one.

Fixes: 39138c1f4a31 ("mtd: rawnand: use bit-wise majority to recover the ONFI param page")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200428094302.14624-4-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/raw/nand_onfi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mtd/nand/raw/nand_onfi.c
+++ b/drivers/mtd/nand/raw/nand_onfi.c
@@ -173,7 +173,7 @@ int nand_onfi_detect(struct nand_chip *c
 		}
 
 		if (onfi_crc16(ONFI_CRC_BASE, (u8 *)&p[i], 254) ==
-				le16_to_cpu(p->crc)) {
+		    le16_to_cpu(p[i].crc)) {
 			if (i)
 				memcpy(p, &p[i], sizeof(*p));
 			break;

[PATCH 5.4 242/261] mtd: rawnand: brcmnand: fix hamming oob layout

[Greg Kroah-Hartman]

From: Álvaro Fernández Rojas <noltari@gmail.com>

commit 130bbde4809b011faf64f99dddc14b4b01f440c3 upstream.

First 2 bytes are used in large-page nand.

Fixes: ef5eeea6e911 ("mtd: nand: brcm: switch to mtd_ooblayout_ops")
Cc: stable@vger.kernel.org
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200512075733.745374-2-noltari@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/raw/brcmnand/brcmnand.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -1019,11 +1019,14 @@ static int brcmnand_hamming_ooblayout_fr
 		if (!section) {
 			/*
 			 * Small-page NAND use byte 6 for BBI while large-page
-			 * NAND use byte 0.
+			 * NAND use bytes 0 and 1.
 			 */
-			if (cfg->page_size > 512)
-				oobregion->offset++;
-			oobregion->length--;
+			if (cfg->page_size > 512) {
+				oobregion->offset += 2;
+				oobregion->length -= 2;
+			} else {
+				oobregion->length--;
+			}
 		}
 	}
 

[PATCH 5.4 243/261] mtd: rawnand: diskonchip: Fix the probe error path

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit c5be12e45940f1aa1b5dfa04db5d15ad24f7c896 upstream.

Not sure nand_cleanup() is the right function to call here but in any
case it is not nand_release(). Indeed, even a comment says that
calling nand_release() is a bit of a hack as there is no MTD device to
unregister. So switch to nand_cleanup() for now and drop this
comment.

There is no Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense even if it did not intruce
any bug.

Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-13-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/raw/diskonchip.c |    7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

--- a/drivers/mtd/nand/raw/diskonchip.c
+++ b/drivers/mtd/nand/raw/diskonchip.c
@@ -1609,13 +1609,10 @@ static int __init doc_probe(unsigned lon
 		numchips = doc2001_init(mtd);
 
 	if ((ret = nand_scan(nand, numchips)) || (ret = doc->late_init(mtd))) {
-		/* DBB note: i believe nand_release is necessary here, as
+		/* DBB note: i believe nand_cleanup is necessary here, as
 		   buffers may have been allocated in nand_base.  Check with
 		   Thomas. FIX ME! */
-		/* nand_release will call mtd_device_unregister, but we
-		   haven't yet added it.  This is handled without incident by
-		   mtd_device_unregister, as far as I can tell. */
-		nand_release(nand);
+		nand_cleanup(nand);
 		goto fail;
 	}
 

[PATCH 5.4 244/261] mtd: rawnand: sharpsl: Fix the probe error path

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit 0f44b3275b3798ccb97a2f51ac85871c30d6fbbc upstream.

nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.

There is no Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense.

Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-49-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/raw/sharpsl.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mtd/nand/raw/sharpsl.c
+++ b/drivers/mtd/nand/raw/sharpsl.c
@@ -183,7 +183,7 @@ static int sharpsl_nand_probe(struct pla
 	return 0;
 
 err_add:
-	nand_release(this);
+	nand_cleanup(this);
 
 err_scan:
 	iounmap(sharpsl->io);

[PATCH 5.4 245/261] mtd: rawnand: ingenic: Fix the probe error path

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit de17cade0e034e9b721a6db9b488014effac1e5a upstream.

nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.

There is no real Fixes tag applying here as the use of nand_release()
in this driver predates the introduction of nand_cleanup() in
commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. Hence, pointing it as the commit to
fix for backporting purposes, even if this commit is not introducing
any bug makes sense.

Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Harvey Hunt <harveyhuntnexus@gmail.com>
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-22-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
+++ b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
@@ -376,7 +376,7 @@ static int ingenic_nand_init_chip(struct
 
 	ret = mtd_device_register(mtd, NULL, 0);
 	if (ret) {
-		nand_release(chip);
+		nand_cleanup(chip);
 		return ret;
 	}
 

[PATCH 5.4 246/261] mtd: rawnand: xway: Fix the probe error path

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit 34531be5e804a8e1abf314a6c3a19fe342e4a154 upstream.

nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.

There is no real Fixes tag applying here as the use of nand_release()
in this driver predates the introduction of nand_cleanup() in
commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense even if this commit is not
introducing any bug.

Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-61-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/raw/xway_nand.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mtd/nand/raw/xway_nand.c
+++ b/drivers/mtd/nand/raw/xway_nand.c
@@ -210,7 +210,7 @@ static int xway_nand_probe(struct platfo
 
 	err = mtd_device_register(mtd, NULL, 0);
 	if (err)
-		nand_release(&data->chip);
+		nand_cleanup(&data->chip);
 
 	return err;
 }

[PATCH 5.4 247/261] mtd: rawnand: orion: Fix the probe error path

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit be238fbf78e4c7c586dac235ab967d3e565a4d1a upstream.

nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.

There is no real Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense even if this commit is not
introducing any bug.

Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-34-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/raw/orion_nand.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mtd/nand/raw/orion_nand.c
+++ b/drivers/mtd/nand/raw/orion_nand.c
@@ -180,7 +180,7 @@ static int __init orion_nand_probe(struc
 	mtd->name = "orion_nand";
 	ret = mtd_device_register(mtd, board->parts, board->nr_parts);
 	if (ret) {
-		nand_release(nc);
+		nand_cleanup(nc);
 		goto no_dev;
 	}
 

[PATCH 5.4 248/261] mtd: rawnand: socrates: Fix the probe error path

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit 9c6c2e5cc77119ce0dacb4f9feedb73ce0354421 upstream.

nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.

There is no real Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense even if this commit is not
introducing any bug.

Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-51-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/raw/socrates_nand.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mtd/nand/raw/socrates_nand.c
+++ b/drivers/mtd/nand/raw/socrates_nand.c
@@ -169,7 +169,7 @@ static int socrates_nand_probe(struct pl
 	if (!res)
 		return res;
 
-	nand_release(nand_chip);
+	nand_cleanup(nand_chip);
 
 out:
 	iounmap(host->io_base);

[PATCH 5.4 249/261] mtd: rawnand: oxnas: Fix the probe error path

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit 154298e2a3f6c9ce1d76cdb48d89fd5b107ea1a3 upstream.

nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.

While at it, be consistent and move the function call in the error
path thanks to a goto statement.

Fixes: 668592492409 ("mtd: nand: Add OX820 NAND Support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-37-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/raw/oxnas_nand.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/mtd/nand/raw/oxnas_nand.c
+++ b/drivers/mtd/nand/raw/oxnas_nand.c
@@ -140,10 +140,8 @@ static int oxnas_nand_probe(struct platf
 			goto err_release_child;
 
 		err = mtd_device_register(mtd, NULL, 0);
-		if (err) {
-			nand_release(chip);
-			goto err_release_child;
-		}
+		if (err)
+			goto err_cleanup_nand;
 
 		oxnas->chips[nchips] = chip;
 		++nchips;
@@ -159,6 +157,8 @@ static int oxnas_nand_probe(struct platf
 
 	return 0;
 
+err_cleanup_nand:
+	nand_cleanup(chip);
 err_release_child:
 	of_node_put(nand_np);
 err_clk_unprepare:

[PATCH 5.4 250/261] mtd: rawnand: sunxi: Fix the probe error path

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit 3d84515ffd8fb657e10fa5b1215e9f095fa7efca upstream.

nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.

Fixes: 1fef62c1423b ("mtd: nand: add sunxi NAND flash controller support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-54-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/raw/sunxi_nand.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -2003,7 +2003,7 @@ static int sunxi_nand_chip_init(struct d
 	ret = mtd_device_register(mtd, NULL, 0);
 	if (ret) {
 		dev_err(dev, "failed to register mtd device: %d\n", ret);
-		nand_release(nand);
+		nand_cleanup(nand);
 		return ret;
 	}
 

[PATCH 5.4 251/261] mtd: rawnand: plat_nand: Fix the probe error path

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit 5284024b4dac5e94f7f374ca905c7580dbc455e9 upstream.

nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.

There is no real Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible, hence pointing it as the commit to
fix for backporting purposes, even if this commit is not introducing
any bug.

Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-43-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/raw/plat_nand.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mtd/nand/raw/plat_nand.c
+++ b/drivers/mtd/nand/raw/plat_nand.c
@@ -92,7 +92,7 @@ static int plat_nand_probe(struct platfo
 	if (!err)
 		return err;
 
-	nand_release(&data->chip);
+	nand_cleanup(&data->chip);
 out:
 	if (pdata->ctrl.remove)
 		pdata->ctrl.remove(pdev);

[PATCH 5.4 252/261] mtd: rawnand: pasemi: Fix the probe error path

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit f51466901c07e6930435d30b02a21f0841174f61 upstream.

nand_cleanup() is supposed to be called on error after a successful
call to nand_scan() to free all NAND resources.

There is no real Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible, hence pointing it as the commit to
fix for backporting purposes, even if this commit is not introducing
any bug.

Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-41-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/raw/pasemi_nand.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/mtd/nand/raw/pasemi_nand.c
+++ b/drivers/mtd/nand/raw/pasemi_nand.c
@@ -146,7 +146,7 @@ static int pasemi_nand_probe(struct plat
 	if (mtd_device_register(pasemi_nand_mtd, NULL, 0)) {
 		dev_err(dev, "Unable to register MTD device\n");
 		err = -ENODEV;
-		goto out_lpc;
+		goto out_cleanup_nand;
 	}
 
 	dev_info(dev, "PA Semi NAND flash at %pR, control at I/O %x\n", &res,
@@ -154,6 +154,8 @@ static int pasemi_nand_probe(struct plat
 
 	return 0;
 
+ out_cleanup_nand:
+	nand_cleanup(chip);
  out_lpc:
 	release_region(lpcctl, 4);
  out_ior:

[PATCH 5.4 253/261] mtd: rawnand: mtk: Fix the probe error path

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit 8a82bbcadec877f5f938c54026278dfc1f05a332 upstream.

nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.

There is no real Fixes tag applying here as the use of nand_release()
in this driver predates the introduction of nand_cleanup() in
commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense even if this commit is not
introducing any bug.

Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-28-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/raw/mtk_nand.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mtd/nand/raw/mtk_nand.c
+++ b/drivers/mtd/nand/raw/mtk_nand.c
@@ -1419,7 +1419,7 @@ static int mtk_nfc_nand_chip_init(struct
 	ret = mtd_device_register(mtd, NULL, 0);
 	if (ret) {
 		dev_err(dev, "mtd parse partition error\n");
-		nand_release(nand);
+		nand_cleanup(nand);
 		return ret;
 	}
 

[PATCH 5.4 254/261] mtd: rawnand: tmio: Fix the probe error path

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit 75e9a330a9bd48f97a55a08000236084fe3dae56 upstream.

nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.

There is no real Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense even if this commit is not
introducing any bug.

Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-57-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/raw/tmio_nand.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mtd/nand/raw/tmio_nand.c
+++ b/drivers/mtd/nand/raw/tmio_nand.c
@@ -448,7 +448,7 @@ static int tmio_probe(struct platform_de
 	if (!retval)
 		return retval;
 
-	nand_release(nand_chip);
+	nand_cleanup(nand_chip);
 
 err_irq:
 	tmio_hw_stop(dev, tmio);

[PATCH 5.4 255/261] w1: omap-hdq: cleanup to add missing newline for some dev_dbg

[Greg Kroah-Hartman]

From: H. Nikolaus Schaller <hns@goldelico.com>

commit 5e02f3b31704e24537697bce54f8156bdb72b7a6 upstream.

Otherwise it will corrupt the console log during debugging.

Fixes: 7b5362a603a1 ("w1: omap_hdq: Fix some error/debug handling.")
Cc: stable@vger.kernel.org
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/cd0d55749a091214106575f6e1d363c6db56622f.1590255176.git.hns@goldelico.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/w1/masters/omap_hdq.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -176,7 +176,7 @@ static int hdq_write_byte(struct hdq_dat
 	/* check irqstatus */
 	if (!(*status & OMAP_HDQ_INT_STATUS_TXCOMPLETE)) {
 		dev_dbg(hdq_data->dev, "timeout waiting for"
-			" TXCOMPLETE/RXCOMPLETE, %x", *status);
+			" TXCOMPLETE/RXCOMPLETE, %x\n", *status);
 		ret = -ETIMEDOUT;
 		goto out;
 	}
@@ -187,7 +187,7 @@ static int hdq_write_byte(struct hdq_dat
 			OMAP_HDQ_FLAG_CLEAR, &tmp_status);
 	if (ret) {
 		dev_dbg(hdq_data->dev, "timeout waiting GO bit"
-			" return to zero, %x", tmp_status);
+			" return to zero, %x\n", tmp_status);
 	}
 
 out:
@@ -203,7 +203,7 @@ static irqreturn_t hdq_isr(int irq, void
 	spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags);
 	hdq_data->hdq_irqstatus = hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
 	spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags);
-	dev_dbg(hdq_data->dev, "hdq_isr: %x", hdq_data->hdq_irqstatus);
+	dev_dbg(hdq_data->dev, "hdq_isr: %x\n", hdq_data->hdq_irqstatus);
 
 	if (hdq_data->hdq_irqstatus &
 		(OMAP_HDQ_INT_STATUS_TXCOMPLETE | OMAP_HDQ_INT_STATUS_RXCOMPLETE
@@ -311,7 +311,7 @@ static int omap_hdq_break(struct hdq_dat
 	tmp_status = hdq_data->hdq_irqstatus;
 	/* check irqstatus */
 	if (!(tmp_status & OMAP_HDQ_INT_STATUS_TIMEOUT)) {
-		dev_dbg(hdq_data->dev, "timeout waiting for TIMEOUT, %x",
+		dev_dbg(hdq_data->dev, "timeout waiting for TIMEOUT, %x\n",
 				tmp_status);
 		ret = -ETIMEDOUT;
 		goto out;
@@ -338,7 +338,7 @@ static int omap_hdq_break(struct hdq_dat
 			&tmp_status);
 	if (ret)
 		dev_dbg(hdq_data->dev, "timeout waiting INIT&GO bits"
-			" return to zero, %x", tmp_status);
+			" return to zero, %x\n", tmp_status);
 
 out:
 	mutex_unlock(&hdq_data->hdq_mutex);

[PATCH 5.4 256/261] f2fs: fix checkpoint=disable:%u%%

[Greg Kroah-Hartman]

From: Jaegeuk Kim <jaegeuk@kernel.org>

commit 1ae18f71cb522684bac1718f5c188fb5e30eb23d upstream.

When parsing the mount option, we don't have sbi->user_block_count.
Should do it after getting it.

Cc: <stable@vger.kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/f2fs/f2fs.h  |    1 +
 fs/f2fs/super.c |   25 +++++++++++++++++++------
 2 files changed, 20 insertions(+), 6 deletions(-)

--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -138,6 +138,7 @@ struct f2fs_mount_info {
 	int alloc_mode;			/* segment allocation policy */
 	int fsync_mode;			/* fsync policy */
 	bool test_dummy_encryption;	/* test dummy encryption */
+	block_t unusable_cap_perc;	/* percentage for cap */
 	block_t unusable_cap;		/* Amount of space allowed to be
 					 * unusable when disabling checkpoint
 					 */
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -277,6 +277,22 @@ static inline void limit_reserve_root(st
 					   F2FS_OPTION(sbi).s_resgid));
 }
 
+static inline void adjust_unusable_cap_perc(struct f2fs_sb_info *sbi)
+{
+	if (!F2FS_OPTION(sbi).unusable_cap_perc)
+		return;
+
+	if (F2FS_OPTION(sbi).unusable_cap_perc == 100)
+		F2FS_OPTION(sbi).unusable_cap = sbi->user_block_count;
+	else
+		F2FS_OPTION(sbi).unusable_cap = (sbi->user_block_count / 100) *
+					F2FS_OPTION(sbi).unusable_cap_perc;
+
+	f2fs_info(sbi, "Adjust unusable cap for checkpoint=disable = %u / %u%%",
+			F2FS_OPTION(sbi).unusable_cap,
+			F2FS_OPTION(sbi).unusable_cap_perc);
+}
+
 static void init_once(void *foo)
 {
 	struct f2fs_inode_info *fi = (struct f2fs_inode_info *) foo;
@@ -790,12 +806,7 @@ static int parse_options(struct super_bl
 				return -EINVAL;
 			if (arg < 0 || arg > 100)
 				return -EINVAL;
-			if (arg == 100)
-				F2FS_OPTION(sbi).unusable_cap =
-					sbi->user_block_count;
-			else
-				F2FS_OPTION(sbi).unusable_cap =
-					(sbi->user_block_count / 100) *	arg;
+			F2FS_OPTION(sbi).unusable_cap_perc = arg;
 			set_opt(sbi, DISABLE_CHECKPOINT);
 			break;
 		case Opt_checkpoint_disable_cap:
@@ -1735,6 +1746,7 @@ skip:
 		(test_opt(sbi, POSIX_ACL) ? SB_POSIXACL : 0);
 
 	limit_reserve_root(sbi);
+	adjust_unusable_cap_perc(sbi);
 	*flags = (*flags & ~SB_LAZYTIME) | (sb->s_flags & SB_LAZYTIME);
 	return 0;
 restore_gc:
@@ -3397,6 +3409,7 @@ try_onemore:
 	sbi->reserved_blocks = 0;
 	sbi->current_reserved_blocks = 0;
 	limit_reserve_root(sbi);
+	adjust_unusable_cap_perc(sbi);
 
 	for (i = 0; i < NR_INODE_TYPE; i++) {
 		INIT_LIST_HEAD(&sbi->inode_list[i]);

[PATCH 5.4 257/261] perf probe: Do not show the skipped events

[Greg Kroah-Hartman]

From: Masami Hiramatsu <mhiramat@kernel.org>

commit f41ebe9defacddeae96a872a33f0f22ced0bfcef upstream.

When a probe point is expanded to several places (like inlined) and if
some of them are skipped because of blacklisted or __init function,
those trace_events has no event name. It must be skipped while showing
results.

Without this fix, you can see "(null):(null)" on the list,

  # ./perf probe request_resource
  reserve_setup is out of .text, skip it.
  Added new events:
    (null):(null)        (on request_resource)
    probe:request_resource (on request_resource)

  You can now use it in all perf tools, such as:

  	perf record -e probe:request_resource -aR sleep 1

  #

With this fix, it is ignored:

  # ./perf probe request_resource
  reserve_setup is out of .text, skip it.
  Added new events:
    probe:request_resource (on request_resource)

  You can now use it in all perf tools, such as:

  	perf record -e probe:request_resource -aR sleep 1

  #

Fixes: 5a51fcd1f30c ("perf probe: Skip kernel symbols which is out of .text")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/158763968263.30755.12800484151476026340.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/perf/builtin-probe.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/tools/perf/builtin-probe.c
+++ b/tools/perf/builtin-probe.c
@@ -364,6 +364,9 @@ static int perf_add_probe_events(struct
 
 		for (k = 0; k < pev->ntevs; k++) {
 			struct probe_trace_event *tev = &pev->tevs[k];
+			/* Skipped events have no event name */
+			if (!tev->event)
+				continue;
 
 			/* We use tev's name for showing new events */
 			show_perf_probe_event(tev->group, tev->event, pev,

[PATCH 5.4 258/261] perf probe: Fix to check blacklist address correctly

[Greg Kroah-Hartman]

From: Masami Hiramatsu <mhiramat@kernel.org>

commit 80526491c2ca6abc028c0f0dbb0707a1f35fb18a upstream.

Fix to check kprobe blacklist address correctly with relocated address
by adjusting debuginfo address.

Since the address in the debuginfo is same as objdump, it is different
from relocated kernel address with KASLR.  Thus, 'perf probe' always
misses to catch the blacklisted addresses.

Without this patch, 'perf probe' can not detect the blacklist addresses
on a KASLR enabled kernel.

  # perf probe kprobe_dispatcher
  Failed to write event: Invalid argument
    Error: Failed to add events.
  #

With this patch, it correctly shows the error message.

  # perf probe kprobe_dispatcher
  kprobe_dispatcher is blacklisted function, skip it.
  Probe point 'kprobe_dispatcher' not found.
    Error: Failed to add events.
  #

Fixes: 9aaf5a5f479b ("perf probe: Check kprobes blacklist when adding new events")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/158763966411.30755.5882376357738273695.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/perf/util/probe-event.c |   21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)

--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -102,7 +102,7 @@ void exit_probe_symbol_maps(void)
 	symbol__exit();
 }
 
-static struct ref_reloc_sym *kernel_get_ref_reloc_sym(void)
+static struct ref_reloc_sym *kernel_get_ref_reloc_sym(struct map **pmap)
 {
 	/* kmap->ref_reloc_sym should be set if host_machine is initialized */
 	struct kmap *kmap;
@@ -114,6 +114,10 @@ static struct ref_reloc_sym *kernel_get_
 	kmap = map__kmap(map);
 	if (!kmap)
 		return NULL;
+
+	if (pmap)
+		*pmap = map;
+
 	return kmap->ref_reloc_sym;
 }
 
@@ -125,7 +129,7 @@ static int kernel_get_symbol_address_by_
 	struct map *map;
 
 	/* ref_reloc_sym is just a label. Need a special fix*/
-	reloc_sym = kernel_get_ref_reloc_sym();
+	reloc_sym = kernel_get_ref_reloc_sym(NULL);
 	if (reloc_sym && strcmp(name, reloc_sym->name) == 0)
 		*addr = (reloc) ? reloc_sym->addr : reloc_sym->unrelocated_addr;
 	else {
@@ -745,6 +749,7 @@ post_process_kernel_probe_trace_events(s
 				       int ntevs)
 {
 	struct ref_reloc_sym *reloc_sym;
+	struct map *map;
 	char *tmp;
 	int i, skipped = 0;
 
@@ -753,7 +758,7 @@ post_process_kernel_probe_trace_events(s
 		return post_process_offline_probe_trace_events(tevs, ntevs,
 						symbol_conf.vmlinux_name);
 
-	reloc_sym = kernel_get_ref_reloc_sym();
+	reloc_sym = kernel_get_ref_reloc_sym(&map);
 	if (!reloc_sym) {
 		pr_warning("Relocated base symbol is not found!\n");
 		return -EINVAL;
@@ -764,9 +769,13 @@ post_process_kernel_probe_trace_events(s
 			continue;
 		if (tevs[i].point.retprobe && !kretprobe_offset_is_supported())
 			continue;
-		/* If we found a wrong one, mark it by NULL symbol */
+		/*
+		 * If we found a wrong one, mark it by NULL symbol.
+		 * Since addresses in debuginfo is same as objdump, we need
+		 * to convert it to addresses on memory.
+		 */
 		if (kprobe_warn_out_range(tevs[i].point.symbol,
-					  tevs[i].point.address)) {
+			map__objdump_2mem(map, tevs[i].point.address))) {
 			tmp = NULL;
 			skipped++;
 		} else {
@@ -2922,7 +2931,7 @@ static int find_probe_trace_events_from_
 	/* Note that the symbols in the kmodule are not relocated */
 	if (!pev->uprobes && !pev->target &&
 			(!pp->retprobe || kretprobe_offset_is_supported())) {
-		reloc_sym = kernel_get_ref_reloc_sym();
+		reloc_sym = kernel_get_ref_reloc_sym(NULL);
 		if (!reloc_sym) {
 			pr_warning("Relocated base symbol is not found!\n");
 			ret = -EINVAL;

[PATCH 5.4 259/261] perf probe: Check address correctness by map instead of _etext

[Greg Kroah-Hartman]

From: Masami Hiramatsu <mhiramat@kernel.org>

commit 2ae5d0d7d8868df7c05c2013c0b9cddd4d40610e upstream.

Since commit 03db8b583d1c ("perf tools: Fix
maps__find_symbol_by_name()") introduced map address range check in
maps__find_symbol_by_name(), we can not get "_etext" from kernel map
because _etext is placed on the edge of the kernel .text section (=
kernel map in perf.)

To fix this issue, this checks the address correctness by map address
range information (map->start and map->end) instead of using _etext
address.

This can cause an error if the target inlined function is embedded in
both __init function and normal function.

For exaample, request_resource() is a normal function but also embedded
in __init reserve_setup(). In this case, the probe point in
reserve_setup() must be skipped.

However, without this fix, it failes to setup all probe points:

  # ./perf probe -v request_resource
  probe-definition(0): request_resource
  symbol:request_resource file:(null) line:0 offset:0 return:0 lazy:(null)
  0 arguments
  Looking at the vmlinux_path (8 entries long)
  Using /usr/lib/debug/lib/modules/5.5.17-200.fc31.x86_64/vmlinux for symbols
  Open Debuginfo file: /usr/lib/debug/lib/modules/5.5.17-200.fc31.x86_64/vmlinux
  Try to find probe point from debuginfo.
  Matched function: request_resource [15e29ad]
  found inline addr: 0xffffffff82fbf892
  Probe point found: reserve_setup+204
  found inline addr: 0xffffffff810e9790
  Probe point found: request_resource+0
  Found 2 probe_trace_events.
  Opening /sys/kernel/debug/tracing//kprobe_events write=1
  Opening /sys/kernel/debug/tracing//README write=0
  Writing event: p:probe/request_resource _text+33290386
  Failed to write event: Invalid argument
    Error: Failed to add events. Reason: Invalid argument (Code: -22)
  #

With this fix,

  # ./perf probe request_resource
  reserve_setup is out of .text, skip it.
  Added new events:
    (null):(null)        (on request_resource)
    probe:request_resource (on request_resource)

  You can now use it in all perf tools, such as:

  	perf record -e probe:request_resource -aR sleep 1

  #

Fixes: 03db8b583d1c ("perf tools: Fix maps__find_symbol_by_name()")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/158763967332.30755.4922496724365529088.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/perf/util/probe-event.c |   25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -236,21 +236,22 @@ static void clear_probe_trace_events(str
 static bool kprobe_blacklist__listed(unsigned long address);
 static bool kprobe_warn_out_range(const char *symbol, unsigned long address)
 {
-	u64 etext_addr = 0;
-	int ret;
+	struct map *map;
+	bool ret = false;
 
-	/* Get the address of _etext for checking non-probable text symbol */
-	ret = kernel_get_symbol_address_by_name("_etext", &etext_addr,
-						false, false);
-
-	if (ret == 0 && etext_addr < address)
-		pr_warning("%s is out of .text, skip it.\n", symbol);
-	else if (kprobe_blacklist__listed(address))
+	map = kernel_get_module_map(NULL);
+	if (map) {
+		ret = address <= map->start || map->end < address;
+		if (ret)
+			pr_warning("%s is out of .text, skip it.\n", symbol);
+		map__put(map);
+	}
+	if (!ret && kprobe_blacklist__listed(address)) {
 		pr_warning("%s is blacklisted function, skip it.\n", symbol);
-	else
-		return false;
+		ret = true;
+	}
 
-	return true;
+	return ret;
 }
 
 /*

[PATCH 5.4 260/261] perf symbols: Fix debuginfo search for Ubuntu

[Greg Kroah-Hartman]

From: Adrian Hunter <adrian.hunter@intel.com>

commit 85afd35575a3c1a3a905722dde5ee70b49282e70 upstream.

Reportedly, from 19.10 Ubuntu has begun mixing up the location of some
debug symbol files, putting files expected to be in
/usr/lib/debug/usr/lib into /usr/lib/debug/lib instead. Fix by adding
another dso_binary_type.

Example on Ubuntu 20.04

  Before:

    $ perf record -e intel_pt//u uname
    Linux
    [ perf record: Woken up 1 times to write data ]
    [ perf record: Captured and wrote 0.030 MB perf.data ]
    $ perf script --call-trace | head -5
           uname 14003 [005] 15321.764958566:  cbr: 42 freq: 4219 MHz (156%)
           uname 14003 [005] 15321.764958566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )          7f1e71cc4100
           uname 14003 [005] 15321.764961566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )              7f1e71cc4df0
           uname 14003 [005] 15321.764961900: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )              7f1e71cc4e18
           uname 14003 [005] 15321.764963233: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )              7f1e71cc5128

  After:

    $ perf script --call-trace | head -5
           uname 14003 [005] 15321.764958566:  cbr: 42 freq: 4219 MHz (156%)
           uname 14003 [005] 15321.764958566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )      _start
           uname 14003 [005] 15321.764961566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )          _dl_start
           uname 14003 [005] 15321.764961900: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )          _dl_start
           uname 14003 [005] 15321.764963233: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )          _dl_start

Reported-by: Travis Downs <travis.downs@gmail.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200526155207.9172-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/perf/util/dso.c          |   16 ++++++++++++++++
 tools/perf/util/dso.h          |    1 +
 tools/perf/util/probe-finder.c |    1 +
 tools/perf/util/symbol.c       |    2 ++
 4 files changed, 20 insertions(+)

--- a/tools/perf/util/dso.c
+++ b/tools/perf/util/dso.c
@@ -47,6 +47,7 @@ char dso__symtab_origin(const struct dso
 		[DSO_BINARY_TYPE__BUILD_ID_CACHE_DEBUGINFO]	= 'D',
 		[DSO_BINARY_TYPE__FEDORA_DEBUGINFO]		= 'f',
 		[DSO_BINARY_TYPE__UBUNTU_DEBUGINFO]		= 'u',
+		[DSO_BINARY_TYPE__MIXEDUP_UBUNTU_DEBUGINFO]	= 'x',
 		[DSO_BINARY_TYPE__OPENEMBEDDED_DEBUGINFO]	= 'o',
 		[DSO_BINARY_TYPE__BUILDID_DEBUGINFO]		= 'b',
 		[DSO_BINARY_TYPE__SYSTEM_PATH_DSO]		= 'd',
@@ -129,6 +130,21 @@ int dso__read_binary_type_filename(const
 		snprintf(filename + len, size - len, "%s", dso->long_name);
 		break;
 
+	case DSO_BINARY_TYPE__MIXEDUP_UBUNTU_DEBUGINFO:
+		/*
+		 * Ubuntu can mixup /usr/lib with /lib, putting debuginfo in
+		 * /usr/lib/debug/lib when it is expected to be in
+		 * /usr/lib/debug/usr/lib
+		 */
+		if (strlen(dso->long_name) < 9 ||
+		    strncmp(dso->long_name, "/usr/lib/", 9)) {
+			ret = -1;
+			break;
+		}
+		len = __symbol__join_symfs(filename, size, "/usr/lib/debug");
+		snprintf(filename + len, size - len, "%s", dso->long_name + 4);
+		break;
+
 	case DSO_BINARY_TYPE__OPENEMBEDDED_DEBUGINFO:
 	{
 		const char *last_slash;
--- a/tools/perf/util/dso.h
+++ b/tools/perf/util/dso.h
@@ -30,6 +30,7 @@ enum dso_binary_type {
 	DSO_BINARY_TYPE__BUILD_ID_CACHE_DEBUGINFO,
 	DSO_BINARY_TYPE__FEDORA_DEBUGINFO,
 	DSO_BINARY_TYPE__UBUNTU_DEBUGINFO,
+	DSO_BINARY_TYPE__MIXEDUP_UBUNTU_DEBUGINFO,
 	DSO_BINARY_TYPE__BUILDID_DEBUGINFO,
 	DSO_BINARY_TYPE__SYSTEM_PATH_DSO,
 	DSO_BINARY_TYPE__GUEST_KMODULE,
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -101,6 +101,7 @@ enum dso_binary_type distro_dwarf_types[
 	DSO_BINARY_TYPE__UBUNTU_DEBUGINFO,
 	DSO_BINARY_TYPE__OPENEMBEDDED_DEBUGINFO,
 	DSO_BINARY_TYPE__BUILDID_DEBUGINFO,
+	DSO_BINARY_TYPE__MIXEDUP_UBUNTU_DEBUGINFO,
 	DSO_BINARY_TYPE__NOT_FOUND,
 };
 
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -79,6 +79,7 @@ static enum dso_binary_type binary_type_
 	DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE,
 	DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE_COMP,
 	DSO_BINARY_TYPE__OPENEMBEDDED_DEBUGINFO,
+	DSO_BINARY_TYPE__MIXEDUP_UBUNTU_DEBUGINFO,
 	DSO_BINARY_TYPE__NOT_FOUND,
 };
 
@@ -1530,6 +1531,7 @@ static bool dso__is_compatible_symtab_ty
 	case DSO_BINARY_TYPE__SYSTEM_PATH_DSO:
 	case DSO_BINARY_TYPE__FEDORA_DEBUGINFO:
 	case DSO_BINARY_TYPE__UBUNTU_DEBUGINFO:
+	case DSO_BINARY_TYPE__MIXEDUP_UBUNTU_DEBUGINFO:
 	case DSO_BINARY_TYPE__BUILDID_DEBUGINFO:
 	case DSO_BINARY_TYPE__OPENEMBEDDED_DEBUGINFO:
 		return !kmod && dso->kernel == DSO_TYPE_USER;

[PATCH 5.4 261/261] perf symbols: Fix kernel maps for kcore and eBPF

[Greg Kroah-Hartman]

From: Adrian Hunter <adrian.hunter@intel.com>

commit 0affd0e5262b6d40f5f63466d88933e99698e240 upstream.

Adjust 'map->pgoff' also when moving a map's start address.

Example with v5.4.34 based kernel:

  Before:

    $ sudo tools/perf/perf record -a --kcore -e intel_pt//k sleep 1
    [ perf record: Woken up 1 times to write data ]
    [ perf record: Captured and wrote 1.958 MB perf.data ]
    $ sudo tools/perf/perf script --itrace=e >/dev/null
    Warning:
    961 instruction trace errors

  After:

    $ sudo tools/perf/perf script --itrace=e >/dev/null
    $

Committer testing:

  # uname -a
  Linux seventh 5.6.10-100.fc30.x86_64 #1 SMP Mon May 4 15:36:44 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
  #

Before:

  # perf record -a --kcore -e intel_pt//k sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.923 MB perf.data ]
  # perf script --itrace=e >/dev/null
  Warning:
  295 instruction trace errors
  #

After:

  # perf record -a --kcore -e intel_pt//k sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.919 MB perf.data ]
  # perf script --itrace=e >/dev/null
  #

Fixes: fb5a88d4131a ("perf tools: Preserve eBPF maps when loading kcore")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200602112505.1406-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/perf/util/symbol.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -1221,6 +1221,7 @@ int map_groups__merge_in(struct map_grou
 
 				m->end = old_map->start;
 				list_add_tail(&m->node, &merged);
+				new_map->pgoff += old_map->end - new_map->start;
 				new_map->start = old_map->end;
 			}
 		} else {
@@ -1241,6 +1242,7 @@ int map_groups__merge_in(struct map_grou
 				 *      |new......| ->         |new...|
 				 * |old....|        -> |old....|
 				 */
+				new_map->pgoff += old_map->end - new_map->start;
 				new_map->start = old_map->end;
 			}
 		}

Re: [PATCH 5.4 000/261] 5.4.48-rc1 review

[Guenter Roeck]

On Fri, Jun 19, 2020 at 04:30:11PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.48 release.
> There are 261 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 21 Jun 2020 14:15:50 +0000.
> Anything received after that time might be too late.
> 

Building mips:defconfig ... failed
--------------
Error log:
arch/mips/mm/dma-noncoherent.c: In function 'cpu_needs_post_dma_flush':
arch/mips/mm/dma-noncoherent.c:36:7: error: 'CPU_LOONGSON2EF' undeclared

Also affects v4.19.y.queue, and causes almost all mips builds to fail.

Guenter

Re: [PATCH 5.4 000/261] 5.4.48-rc1 review

[Daniel Díaz]

Hello!

On 6/19/20 9:30 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.48 release.
> There are 261 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 21 Jun 2020 14:15:50 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.48-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 5.4.48-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.4.y
git commit: 1b895c62ebf44a0852908c0f7ce05f53006fddf0
git describe: v5.4.46-394-g1b895c62ebf4
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.4-oe/build/v5.4.46-394-g1b895c62ebf4

No regressions (compared to build v5.4.47)

No fixes (compared to build v5.4.47)

Ran 32839 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- juno-r2-compat
- juno-r2-kasan
- nxp-ls2088
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86
- x86-kasan

Test Suites
-----------
* build
* kselftest
* kselftest/drivers
* kselftest/filesystems
* kselftest/net
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-native/drivers
* kselftest-vsyscall-mode-native/filesystems
* kselftest-vsyscall-mode-native/net
* kselftest-vsyscall-mode-none
* kselftest-vsyscall-mode-none/drivers
* kselftest-vsyscall-mode-none/filesystems
* kselftest-vsyscall-mode-none/net
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fs-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* network-basic-tests
* perf
* v4l2-compliance


Greetings!

Daniel Díaz
daniel.diaz@linaro.org

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.4 000/261] 5.4.48-rc1 review

[Guenter Roeck]

On Fri, Jun 19, 2020 at 04:30:11PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.48 release.
> There are 261 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 21 Jun 2020 14:15:50 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 157 pass: 146 fail: 11
Failed builds:
	<most mips>
Qemu test results:
	total: 429 pass: 370 fail: 59
Failed tests:
	<all mips>

arch/mips/mm/dma-noncoherent.c: In function 'cpu_needs_post_dma_flush':
arch/mips/mm/dma-noncoherent.c:36:7: error: 'CPU_LOONGSON2EF' undeclared

Guenter

Re: [PATCH 5.4 000/261] 5.4.48-rc1 review

[Greg Kroah-Hartman]

On Fri, Jun 19, 2020 at 09:01:18AM -0700, Guenter Roeck wrote:
> On Fri, Jun 19, 2020 at 04:30:11PM +0200, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.4.48 release.
> > There are 261 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sun, 21 Jun 2020 14:15:50 +0000.
> > Anything received after that time might be too late.
> > 
> 
> Building mips:defconfig ... failed
> --------------
> Error log:
> arch/mips/mm/dma-noncoherent.c: In function 'cpu_needs_post_dma_flush':
> arch/mips/mm/dma-noncoherent.c:36:7: error: 'CPU_LOONGSON2EF' undeclared
> 
> Also affects v4.19.y.queue, and causes almost all mips builds to fail.

Thanks, I've dropped the offending patch from both trees now.

greg k-h

Re: [PATCH 5.4 000/261] 5.4.48-rc1 review

[Greg Kroah-Hartman]

On Sat, Jun 20, 2020 at 10:00:06AM +0200, Greg Kroah-Hartman wrote:
> On Fri, Jun 19, 2020 at 09:01:18AM -0700, Guenter Roeck wrote:
> > On Fri, Jun 19, 2020 at 04:30:11PM +0200, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 5.4.48 release.
> > > There are 261 patches in this series, all will be posted as a response
> > > to this one.  If anyone has any issues with these being applied, please
> > > let me know.
> > > 
> > > Responses should be made by Sun, 21 Jun 2020 14:15:50 +0000.
> > > Anything received after that time might be too late.
> > > 
> > 
> > Building mips:defconfig ... failed
> > --------------
> > Error log:
> > arch/mips/mm/dma-noncoherent.c: In function 'cpu_needs_post_dma_flush':
> > arch/mips/mm/dma-noncoherent.c:36:7: error: 'CPU_LOONGSON2EF' undeclared
> > 
> > Also affects v4.19.y.queue, and causes almost all mips builds to fail.
> 
> Thanks, I've dropped the offending patch from both trees now.

And pushed out -rc2 for 5.4.y and 4.19.y with that change, and some
other patches dropped.

thanks,

greg k-h