From: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
To: jic23@kernel.org, robh+dt@kernel.org, robh@kernel.org,
mchehab+huawei@kernel.org, davem@davemloft.net,
gregkh@linuxfoundation.org
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Subject: [PATCH v4 12/13] dt-bindings: iio: imu: Add inv_icm42600 documentation
Date: Mon, 22 Jun 2020 17:37:28 +0200 [thread overview]
Message-ID: <20200622153729.12702-13-jmaneyrol@invensense.com> (raw)
In-Reply-To: <20200622153729.12702-1-jmaneyrol@invensense.com>
Document the ICM-426xxx devices devicetree bindings.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
---
.../bindings/iio/imu/invensense,icm42600.yaml | 90 +++++++++++++++++++
1 file changed, 90 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
new file mode 100644
index 000000000000..abd8d25e1136
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/invensense,icm42600.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: InvenSense ICM-426xx Inertial Measurement Unit
+
+maintainers:
+ - Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
+
+description: |
+ 6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis
+ accelerometer.
+
+ It has a configurable host interface that supports I3C, I2C and SPI serial
+ communication, features a 2kB FIFO and 2 programmable interrupts with
+ ultra-low-power wake-on-motion support to minimize system power consumption.
+
+ Other industry-leading features include InvenSense on-chip APEX Motion
+ Processing engine for gesture recognition, activity classification, and
+ pedometer, along with programmable digital filters, and an embedded
+ temperature sensor.
+
+ https://invensense.tdk.com/wp-content/uploads/2020/03/DS-000292-ICM-42605-v1.4.pdf
+
+properties:
+ compatible:
+ enum:
+ - invensense,icm42600
+ - invensense,icm42602
+ - invensense,icm42605
+ - invensense,icm42622
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ drive-open-drain:
+ type: boolean
+
+ vdd-supply:
+ description: Regulator that provides power to the sensor
+
+ vddio-supply:
+ description: Regulator that provides power to the bus
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ icm42605@68 {
+ compatible = "invensense,icm42605";
+ reg = <0x68>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&vdd>;
+ vddio-supply = <&vddio>;
+ };
+ };
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ icm42602@0 {
+ compatible = "invensense,icm42602";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+ spi-cpha;
+ spi-cpol;
+ interrupt-parent = <&gpio1>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&vdd>;
+ vddio-supply = <&vddio>;
+ };
+ };
--
2.17.1
next prev parent reply other threads:[~2020-06-22 15:38 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-22 15:37 [PATCH v4 00/13] iio: imu: new inv_icm42600 driver Jean-Baptiste Maneyrol
2020-06-22 15:37 ` [PATCH v4 01/13] iio: imu: inv_icm42600: add core of " Jean-Baptiste Maneyrol
2020-06-22 15:37 ` [PATCH v4 02/13] iio: imu: inv_icm42600: add I2C driver for " Jean-Baptiste Maneyrol
2020-06-22 15:37 ` [PATCH v4 03/13] iio: imu: inv_icm42600: add SPI " Jean-Baptiste Maneyrol
2020-06-22 15:37 ` [PATCH v4 04/13] iio: imu: inv_icm42600: add gyroscope IIO device Jean-Baptiste Maneyrol
2020-06-22 15:37 ` [PATCH v4 05/13] iio: imu: inv_icm42600: add accelerometer " Jean-Baptiste Maneyrol
2020-06-22 15:37 ` [PATCH v4 06/13] iio: imu: inv_icm42600: add temperature sensor support Jean-Baptiste Maneyrol
2020-06-22 15:37 ` [PATCH v4 07/13] iio: imu: add Kconfig and Makefile for inv_icm42600 driver Jean-Baptiste Maneyrol
2020-06-22 15:37 ` [PATCH v4 08/13] Documentation: ABI: add specific icm42600 documentation Jean-Baptiste Maneyrol
2020-11-14 15:23 ` Jonathan Cameron
2020-11-16 9:25 ` Jean-Baptiste Maneyrol
2020-06-22 15:37 ` [PATCH v4 09/13] iio: imu: inv_icm42600: add device interrupt Jean-Baptiste Maneyrol
2020-06-22 15:37 ` [PATCH v4 10/13] iio: imu: inv_icm42600: add buffer support in iio devices Jean-Baptiste Maneyrol
2020-06-22 15:37 ` [PATCH v4 11/13] iio: imu: inv_icm42600: add accurate timestamping Jean-Baptiste Maneyrol
2020-06-22 15:37 ` Jean-Baptiste Maneyrol [this message]
2020-06-22 15:37 ` [PATCH v4 13/13] MAINTAINERS: add entry for inv_icm42600 6-axis imu sensor Jean-Baptiste Maneyrol
2020-06-27 13:29 ` [PATCH v4 00/13] iio: imu: new inv_icm42600 driver Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200622153729.12702-13-jmaneyrol@invensense.com \
--to=jmaneyrol@invensense.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mchehab+huawei@kernel.org \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).