linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v5 00/13] Add support for PinePhone LCD panel
@ 2020-06-26  0:55 Ondrej Jirman
  2020-06-26  0:55 ` [PATCH v5 01/13] dt-bindings: vendor-prefixes: Add Xingbangda Ondrej Jirman
                   ` (12 more replies)
  0 siblings, 13 replies; 26+ messages in thread
From: Ondrej Jirman @ 2020-06-26  0:55 UTC (permalink / raw)
  To: linux-sunxi, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Guido Günther, Purism Kernel Team,
	Rob Herring, Maxime Ripard, Chen-Yu Tsai, Linus Walleij,
	Icenowy Zheng
  Cc: Ondrej Jirman, dri-devel, devicetree, linux-kernel,
	linux-arm-kernel, Samuel Holland, Martijn Braam, Luca Weiss,
	Bhushan Shah

This patchset adds support for the LCD panel of PinePhone.

I've tested this on PinePhone 1.0 and 1.2.

Please take a look.

thank you and regards,
  Ondrej Jirman

Changes in v5:
- rewritten on top of rocktech-jh057n00900 driver
- rocktech-jh057n00900 renamed to st7703 (controller name)
- converted rocktech-jh057n00900 bindings to yaml and extended for xbd599

Changes in v4:
- use ->type from the mode instead of hardcoding (Samuel)
- move init_sequence to ->prepare (Samuel)
- move anti-flicker delay to ->enable, explain it (Samuel)
- add enter_sleep after display_off (Samuel)
- drop ->disable (move code to ->unprepare)
- add ID bytes dumping (Linus)
  (I can't test it since allwinner DSI driver has a broken
   dcs_read function, and I didn't manage to fix it.)
- document magic bytes (Linus)
- assert reset during powerup
- cleanup powerup timings according to the datasheet

Changes in v3:
- Panel driver renamed to the name of the LCD controller
- Re-organize the driver slightly to more easily support more panels
  based on the same controller.
- Add patch to enable the touchscreen to complete the LCD support
  on PinePhone.
- Dropped the "DSI fix" patch (the driver seems to work for me without it)
- Improved brightness levels handling:
  - PinePhone 1.0 uses default levels generated by the driver
  - On PinePhone 1.1 duty cycles < 20% lead to black screen, so
    default levels can't be used. Martijn Braam came up with a
    list of duty cycle values that lead to perception of linear
    brigtness level <-> light intensity on PinePhone 1.1
- There was some feedback on v2 about this being similar to st7701.
  It's only similar in name. Most of the "user commands" are different,
  so I opted to keep this in a new driver instead of creating st770x.
  
  Anyone who likes to check the differences, here are datasheets:

  - https://megous.com/dl/tmp/ST7703_DS_v01_20160128.pdf
  - https://megous.com/dl/tmp/ST7701.pdf

Changes in v2:
- DT Example fix.
- DT Format fix.
- Raised copyright info to 2020.
- Sort panel operation functions.
- Sort inclusion.


-- For phone owners: --

There's an open question on how to set the backlight brightness values
on post 1.0 revision phone, since lower duty cycles (< 10-20%) lead
to backlight being black. It would be nice if more people can test
the various backlight levels on 1.1 and 1.2 revision with this change
in dts:

       brightness-levels = <0 1000>;
       num-interpolated-steps = <1000>;

and report at what brightness level the backlight turns on. So far it
seems this has a wide range. Lowest useable duty cycle for me is ~7%
on 1.2 and for Martijn ~20% on 1.1.

Icenowy Zheng (2):
  dt-bindings: vendor-prefixes: Add Xingbangda
  arm64: dts: sun50i-a64-pinephone: Enable LCD support on PinePhone

Ondrej Jirman (11):
  dt-bindings: panel: Convert rocktech,jh057n00900 to yaml
  dt-bindings: panel: Add compatible for Xingbangda XBD599 panel
  drm/panel: rocktech-jh057n00900: Rename the driver to st7703
  drm/panel: st7703: Rename functions from jh057n prefix to st7703
  drm/panel: st7703: Prepare for supporting multiple panels
  drm/panel: st7703: Move code specific to jh057n closer together
  drm/panel: st7703: Move generic part of init sequence to enable
    callback
  drm/panel: st7703: Add support for Xingbangda XBD599
  drm/panel: st7703: Enter sleep after display off
  drm/panel: st7703: Assert reset prior to powering down the regulators
  arm64: dts: sun50i-a64-pinephone: Add touchscreen support

 .../display/panel/rocktech,jh057n00900.txt    |  23 -
 .../display/panel/rocktech,jh057n00900.yaml   |  70 ++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 .../allwinner/sun50i-a64-pinephone-1.1.dts    |  19 +
 .../dts/allwinner/sun50i-a64-pinephone.dtsi   |  54 ++
 drivers/gpu/drm/panel/Kconfig                 |  26 +-
 drivers/gpu/drm/panel/Makefile                |   2 +-
 .../drm/panel/panel-rocktech-jh057n00900.c    | 424 ------------
 drivers/gpu/drm/panel/panel-sitronix-st7703.c | 655 ++++++++++++++++++
 9 files changed, 814 insertions(+), 461 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
 create mode 100644 Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
 delete mode 100644 drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
 create mode 100644 drivers/gpu/drm/panel/panel-sitronix-st7703.c

-- 
2.27.0


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH v5 01/13] dt-bindings: vendor-prefixes: Add Xingbangda
  2020-06-26  0:55 [PATCH v5 00/13] Add support for PinePhone LCD panel Ondrej Jirman
@ 2020-06-26  0:55 ` Ondrej Jirman
  2020-06-26  0:55 ` [PATCH v5 02/13] dt-bindings: panel: Convert rocktech,jh057n00900 to yaml Ondrej Jirman
                   ` (11 subsequent siblings)
  12 siblings, 0 replies; 26+ messages in thread
From: Ondrej Jirman @ 2020-06-26  0:55 UTC (permalink / raw)
  To: linux-sunxi, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Guido Günther, Purism Kernel Team,
	Rob Herring, Maxime Ripard, Chen-Yu Tsai, Linus Walleij,
	Icenowy Zheng
  Cc: dri-devel, devicetree, linux-kernel, linux-arm-kernel,
	Samuel Holland, Martijn Braam, Luca Weiss, Bhushan Shah,
	Ondrej Jirman, Rob Herring

From: Icenowy Zheng <icenowy@aosc.io>

Shenzhen Xingbangda Display Technology Co., Ltd is a company which
produces LCD modules. It supplies the LCD panels for the PinePhone.

Add the vendor prefix of it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 9aeab66be85f..740b116b179f 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1157,6 +1157,8 @@ patternProperties:
     description: Xiaomi Technology Co., Ltd.
   "^xillybus,.*":
     description: Xillybus Ltd.
+  "^xingbangda,.*":
+    description: Shenzhen Xingbangda Display Technology Co., Ltd
   "^xinpeng,.*":
     description: Shenzhen Xinpeng Technology Co., Ltd
   "^xlnx,.*":
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 26+ messages in thread

* [PATCH v5 02/13] dt-bindings: panel: Convert rocktech,jh057n00900 to yaml
  2020-06-26  0:55 [PATCH v5 00/13] Add support for PinePhone LCD panel Ondrej Jirman
  2020-06-26  0:55 ` [PATCH v5 01/13] dt-bindings: vendor-prefixes: Add Xingbangda Ondrej Jirman
@ 2020-06-26  0:55 ` Ondrej Jirman
  2020-06-29 22:02   ` [PATCH v5 02/13] dt-bindings: panel: Convert rocktech, jh057n00900 " Rob Herring
  2020-06-26  0:55 ` [PATCH v5 03/13] dt-bindings: panel: Add compatible for Xingbangda XBD599 panel Ondrej Jirman
                   ` (10 subsequent siblings)
  12 siblings, 1 reply; 26+ messages in thread
From: Ondrej Jirman @ 2020-06-26  0:55 UTC (permalink / raw)
  To: linux-sunxi, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Guido Günther, Purism Kernel Team,
	Rob Herring, Maxime Ripard, Chen-Yu Tsai, Linus Walleij,
	Icenowy Zheng
  Cc: Ondrej Jirman, dri-devel, devicetree, linux-kernel,
	linux-arm-kernel, Samuel Holland, Martijn Braam, Luca Weiss,
	Bhushan Shah

Convert Rocktech MIPI DSI panel driver from txt to yaml bindings.

Signed-off-by: Ondrej Jirman <megous@megous.com>
---
 .../display/panel/rocktech,jh057n00900.txt    | 23 -------
 .../display/panel/rocktech,jh057n00900.yaml   | 66 +++++++++++++++++++
 2 files changed, 66 insertions(+), 23 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
 create mode 100644 Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
deleted file mode 100644
index a372c5d84695..000000000000
--- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Rocktech jh057n00900 5.5" 720x1440 TFT LCD panel
-
-Required properties:
-- compatible: should be "rocktech,jh057n00900"
-- reg: DSI virtual channel of the peripheral
-- reset-gpios: panel reset gpio
-- backlight: phandle of the backlight device attached to the panel
-- vcc-supply: phandle of the regulator that provides the vcc supply voltage.
-- iovcc-supply: phandle of the regulator that provides the iovcc supply
-  voltage.
-
-Example:
-
-	&mipi_dsi {
-		panel@0 {
-			compatible = "rocktech,jh057n00900";
-			reg = <0>;
-			backlight = <&backlight>;
-			reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
-			vcc-supply = <&reg_2v8_p>;
-			iovcc-supply = <&reg_1v8_p>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
new file mode 100644
index 000000000000..f97c48550741
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/rocktech,jh057n00900.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
+
+maintainers:
+  - Ondrej Jirman <megi@xff.cz>
+
+description: |
+             Rocktech JH057N00900 is a 720x1440 TFT LCD panel
+             connected using a MIPI-DSI video interface.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: rocktech,jh057n00900
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vcc-supply:
+    description: Panel power supply
+
+  vccio-supply:
+    description: I/O voltage supply
+
+  reset-gpios:
+    description: GPIO used for the reset pin
+    maxItems: 1
+
+  backlight:
+    description: Backlight used by the panel
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+required:
+  - compatible
+  - reg
+  - vcc-supply
+  - vccio-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      panel@0 {
+	compatible = "rocktech,jh057n00900";
+	reg = <0>;
+	vcc-supply = <&reg_2v8_p>;
+	iovcc-supply = <&reg_1v8_p>;
+	reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+	backlight = <&backlight>;
+      };
+    };
+...
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 26+ messages in thread

* [PATCH v5 03/13] dt-bindings: panel: Add compatible for Xingbangda XBD599 panel
  2020-06-26  0:55 [PATCH v5 00/13] Add support for PinePhone LCD panel Ondrej Jirman
  2020-06-26  0:55 ` [PATCH v5 01/13] dt-bindings: vendor-prefixes: Add Xingbangda Ondrej Jirman
  2020-06-26  0:55 ` [PATCH v5 02/13] dt-bindings: panel: Convert rocktech,jh057n00900 to yaml Ondrej Jirman
@ 2020-06-26  0:55 ` Ondrej Jirman
  2020-06-26  0:55 ` [PATCH v5 04/13] drm/panel: rocktech-jh057n00900: Rename the driver to st7703 Ondrej Jirman
                   ` (9 subsequent siblings)
  12 siblings, 0 replies; 26+ messages in thread
From: Ondrej Jirman @ 2020-06-26  0:55 UTC (permalink / raw)
  To: linux-sunxi, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Guido Günther, Purism Kernel Team,
	Rob Herring, Maxime Ripard, Chen-Yu Tsai, Linus Walleij,
	Icenowy Zheng
  Cc: Ondrej Jirman, dri-devel, devicetree, linux-kernel,
	linux-arm-kernel, Samuel Holland, Martijn Braam, Luca Weiss,
	Bhushan Shah

Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI LCD panel. It is based on
Sitronix ST7703 LCD controller just like rocktech,jh057n00900. It is
used in PinePhone.

Add a compatible for it.

Signed-off-by: Ondrej Jirman <megous@megous.com>
---
 .../bindings/display/panel/rocktech,jh057n00900.yaml        | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
index f97c48550741..4d43a1b36d7c 100644
--- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
+++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
@@ -18,7 +18,11 @@ allOf:
 
 properties:
   compatible:
-    const: rocktech,jh057n00900
+    enum:
+        # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
+      - rocktech,jh057n00900
+        # Xingbangda XBD599 5.99" 720x1440 TFT LCD panel
+      - xingbangda,xbd599
 
   reg:
     maxItems: 1
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 26+ messages in thread

* [PATCH v5 04/13] drm/panel: rocktech-jh057n00900: Rename the driver to st7703
  2020-06-26  0:55 [PATCH v5 00/13] Add support for PinePhone LCD panel Ondrej Jirman
                   ` (2 preceding siblings ...)
  2020-06-26  0:55 ` [PATCH v5 03/13] dt-bindings: panel: Add compatible for Xingbangda XBD599 panel Ondrej Jirman
@ 2020-06-26  0:55 ` Ondrej Jirman
  2020-07-01  7:47   ` Linus Walleij
  2020-06-26  0:55 ` [PATCH v5 05/13] drm/panel: st7703: Rename functions from jh057n prefix " Ondrej Jirman
                   ` (8 subsequent siblings)
  12 siblings, 1 reply; 26+ messages in thread
From: Ondrej Jirman @ 2020-06-26  0:55 UTC (permalink / raw)
  To: linux-sunxi, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Guido Günther, Purism Kernel Team,
	Rob Herring, Maxime Ripard, Chen-Yu Tsai, Linus Walleij,
	Icenowy Zheng
  Cc: Ondrej Jirman, dri-devel, devicetree, linux-kernel,
	linux-arm-kernel, Samuel Holland, Martijn Braam, Luca Weiss,
	Bhushan Shah

This rename is done so that the driver matches the name of the
display controller and in preparation for adding support for more
panels to the driver.

This is just a basic file rename, with no code changes.

Signed-off-by: Ondrej Jirman <megous@megous.com>
---
 drivers/gpu/drm/panel/Kconfig                 | 26 +++++++++----------
 drivers/gpu/drm/panel/Makefile                |  2 +-
 ...-jh057n00900.c => panel-sitronix-st7703.c} |  0
 3 files changed, 14 insertions(+), 14 deletions(-)
 rename drivers/gpu/drm/panel/{panel-rocktech-jh057n00900.c => panel-sitronix-st7703.c} (100%)

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 39055c1f0e2f..de2f2a452be5 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -283,19 +283,6 @@ config DRM_PANEL_RAYDIUM_RM68200
 	  Say Y here if you want to enable support for Raydium RM68200
 	  720x1280 DSI video mode panel.
 
-config DRM_PANEL_ROCKTECH_JH057N00900
-	tristate "Rocktech JH057N00900 MIPI touchscreen panel"
-	depends on OF
-	depends on DRM_MIPI_DSI
-	depends on BACKLIGHT_CLASS_DEVICE
-	help
-	  Say Y here if you want to enable support for Rocktech JH057N00900
-	  MIPI DSI panel as e.g. used in the Librem 5 devkit. It has a
-	  resolution of 720x1440 pixels, a built in backlight and touch
-	  controller.
-	  Touch input support is provided by the goodix driver and needs to be
-	  selected separately.
-
 config DRM_PANEL_RONBO_RB070D30
 	tristate "Ronbo Electronics RB070D30 panel"
 	depends on OF
@@ -395,6 +382,19 @@ config DRM_PANEL_SITRONIX_ST7701
 	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
 	  system interfaces.
 
+config DRM_PANEL_SITRONIX_ST7703
+	tristate "Sitronix ST7703 based MIPI touchscreen panels"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Sitronix ST7703 based
+	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
+	  the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
+	  in backlight and touch controller.
+	  Touch input support is provided by the goodix driver and needs to be
+	  selected separately.
+
 config DRM_PANEL_SITRONIX_ST7789V
 	tristate "Sitronix ST7789V panel"
 	depends on OF && SPI
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index de74f282c433..e45ceac6286f 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -27,7 +27,6 @@ obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o
 obj-$(CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN) += panel-raspberrypi-touchscreen.o
 obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM67191) += panel-raydium-rm67191.o
 obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM68200) += panel-raydium-rm68200.o
-obj-$(CONFIG_DRM_PANEL_ROCKTECH_JH057N00900) += panel-rocktech-jh057n00900.o
 obj-$(CONFIG_DRM_PANEL_RONBO_RB070D30) += panel-ronbo-rb070d30.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D16D0) += panel-samsung-s6d16d0.o
@@ -41,6 +40,7 @@ obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
 obj-$(CONFIG_DRM_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
 obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
 obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
+obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
 obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
 obj-$(CONFIG_DRM_PANEL_SONY_ACX424AKP) += panel-sony-acx424akp.o
 obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
diff --git a/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
similarity index 100%
rename from drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
rename to drivers/gpu/drm/panel/panel-sitronix-st7703.c
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 26+ messages in thread

* [PATCH v5 05/13] drm/panel: st7703: Rename functions from jh057n prefix to st7703
  2020-06-26  0:55 [PATCH v5 00/13] Add support for PinePhone LCD panel Ondrej Jirman
                   ` (3 preceding siblings ...)
  2020-06-26  0:55 ` [PATCH v5 04/13] drm/panel: rocktech-jh057n00900: Rename the driver to st7703 Ondrej Jirman
@ 2020-06-26  0:55 ` Ondrej Jirman
  2020-07-01  7:48   ` Linus Walleij
  2020-06-26  0:55 ` [PATCH v5 06/13] drm/panel: st7703: Prepare for supporting multiple panels Ondrej Jirman
                   ` (7 subsequent siblings)
  12 siblings, 1 reply; 26+ messages in thread
From: Ondrej Jirman @ 2020-06-26  0:55 UTC (permalink / raw)
  To: linux-sunxi, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Guido Günther, Purism Kernel Team,
	Rob Herring, Maxime Ripard, Chen-Yu Tsai, Linus Walleij,
	Icenowy Zheng
  Cc: Ondrej Jirman, dri-devel, devicetree, linux-kernel,
	linux-arm-kernel, Samuel Holland, Martijn Braam, Luca Weiss,
	Bhushan Shah

This is done so that code that's not specific to a particular
jh057n panel is named after the controller. Functions specific
to the panel are kept named after the panel.

Signed-off-by: Ondrej Jirman <megous@megous.com>
---
 drivers/gpu/drm/panel/panel-sitronix-st7703.c | 90 ++++++++++---------
 1 file changed, 46 insertions(+), 44 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
index 38ff742bc120..511af659f273 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
@@ -1,6 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Rockteck jh057n00900 5.5" MIPI-DSI panel driver
+ * Driver for panels based on Sitronix ST7703 controller, souch as:
+ *
+ * - Rocktech jh057n00900 5.5" MIPI-DSI panel
  *
  * Copyright (C) Purism SPC 2019
  */
@@ -21,7 +23,7 @@
 #include <drm/drm_panel.h>
 #include <drm/drm_print.h>
 
-#define DRV_NAME "panel-rocktech-jh057n00900"
+#define DRV_NAME "panel-sitronix-st7703"
 
 /* Manufacturer specific Commands send via DSI */
 #define ST7703_CMD_ALL_PIXEL_OFF 0x22
@@ -45,7 +47,7 @@
 #define ST7703_CMD_SETGIP1	 0xE9
 #define ST7703_CMD_SETGIP2	 0xEA
 
-struct jh057n {
+struct st7703 {
 	struct device *dev;
 	struct drm_panel panel;
 	struct gpio_desc *reset_gpio;
@@ -56,9 +58,9 @@ struct jh057n {
 	struct dentry *debugfs;
 };
 
-static inline struct jh057n *panel_to_jh057n(struct drm_panel *panel)
+static inline struct st7703 *panel_to_st7703(struct drm_panel *panel)
 {
-	return container_of(panel, struct jh057n, panel);
+	return container_of(panel, struct st7703, panel);
 }
 
 #define dsi_generic_write_seq(dsi, seq...) do {				\
@@ -69,7 +71,7 @@ static inline struct jh057n *panel_to_jh057n(struct drm_panel *panel)
 			return ret;					\
 	} while (0)
 
-static int jh057n_init_sequence(struct jh057n *ctx)
+static int jh057n_init_sequence(struct st7703 *ctx)
 {
 	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
 	struct device *dev = ctx->dev;
@@ -141,9 +143,9 @@ static int jh057n_init_sequence(struct jh057n *ctx)
 	return 0;
 }
 
-static int jh057n_enable(struct drm_panel *panel)
+static int st7703_enable(struct drm_panel *panel)
 {
-	struct jh057n *ctx = panel_to_jh057n(panel);
+	struct st7703 *ctx = panel_to_st7703(panel);
 	int ret;
 
 	ret = jh057n_init_sequence(ctx);
@@ -156,17 +158,17 @@ static int jh057n_enable(struct drm_panel *panel)
 	return 0;
 }
 
-static int jh057n_disable(struct drm_panel *panel)
+static int st7703_disable(struct drm_panel *panel)
 {
-	struct jh057n *ctx = panel_to_jh057n(panel);
+	struct st7703 *ctx = panel_to_st7703(panel);
 	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
 
 	return mipi_dsi_dcs_set_display_off(dsi);
 }
 
-static int jh057n_unprepare(struct drm_panel *panel)
+static int st7703_unprepare(struct drm_panel *panel)
 {
-	struct jh057n *ctx = panel_to_jh057n(panel);
+	struct st7703 *ctx = panel_to_st7703(panel);
 
 	if (!ctx->prepared)
 		return 0;
@@ -178,9 +180,9 @@ static int jh057n_unprepare(struct drm_panel *panel)
 	return 0;
 }
 
-static int jh057n_prepare(struct drm_panel *panel)
+static int st7703_prepare(struct drm_panel *panel)
 {
-	struct jh057n *ctx = panel_to_jh057n(panel);
+	struct st7703 *ctx = panel_to_st7703(panel);
 	int ret;
 
 	if (ctx->prepared)
@@ -230,10 +232,10 @@ static const struct drm_display_mode default_mode = {
 	.height_mm   = 130,
 };
 
-static int jh057n_get_modes(struct drm_panel *panel,
+static int st7703_get_modes(struct drm_panel *panel,
 			    struct drm_connector *connector)
 {
-	struct jh057n *ctx = panel_to_jh057n(panel);
+	struct st7703 *ctx = panel_to_st7703(panel);
 	struct drm_display_mode *mode;
 
 	mode = drm_mode_duplicate(connector->dev, &default_mode);
@@ -254,17 +256,17 @@ static int jh057n_get_modes(struct drm_panel *panel,
 	return 1;
 }
 
-static const struct drm_panel_funcs jh057n_drm_funcs = {
-	.disable   = jh057n_disable,
-	.unprepare = jh057n_unprepare,
-	.prepare   = jh057n_prepare,
-	.enable	   = jh057n_enable,
-	.get_modes = jh057n_get_modes,
+static const struct drm_panel_funcs st7703_drm_funcs = {
+	.disable   = st7703_disable,
+	.unprepare = st7703_unprepare,
+	.prepare   = st7703_prepare,
+	.enable	   = st7703_enable,
+	.get_modes = st7703_get_modes,
 };
 
 static int allpixelson_set(void *data, u64 val)
 {
-	struct jh057n *ctx = data;
+	struct st7703 *ctx = data;
 	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
 
 	DRM_DEV_DEBUG_DRIVER(ctx->dev, "Setting all pixels on\n");
@@ -282,7 +284,7 @@ static int allpixelson_set(void *data, u64 val)
 DEFINE_SIMPLE_ATTRIBUTE(allpixelson_fops, NULL,
 			allpixelson_set, "%llu\n");
 
-static void jh057n_debugfs_init(struct jh057n *ctx)
+static void st7703_debugfs_init(struct st7703 *ctx)
 {
 	ctx->debugfs = debugfs_create_dir(DRV_NAME, NULL);
 
@@ -290,16 +292,16 @@ static void jh057n_debugfs_init(struct jh057n *ctx)
 			    &allpixelson_fops);
 }
 
-static void jh057n_debugfs_remove(struct jh057n *ctx)
+static void st7703_debugfs_remove(struct st7703 *ctx)
 {
 	debugfs_remove_recursive(ctx->debugfs);
 	ctx->debugfs = NULL;
 }
 
-static int jh057n_probe(struct mipi_dsi_device *dsi)
+static int st7703_probe(struct mipi_dsi_device *dsi)
 {
 	struct device *dev = &dsi->dev;
-	struct jh057n *ctx;
+	struct st7703 *ctx;
 	int ret;
 
 	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
@@ -340,7 +342,7 @@ static int jh057n_probe(struct mipi_dsi_device *dsi)
 		return ret;
 	}
 
-	drm_panel_init(&ctx->panel, dev, &jh057n_drm_funcs,
+	drm_panel_init(&ctx->panel, dev, &st7703_drm_funcs,
 		       DRM_MODE_CONNECTOR_DSI);
 
 	ret = drm_panel_of_backlight(&ctx->panel);
@@ -363,13 +365,13 @@ static int jh057n_probe(struct mipi_dsi_device *dsi)
 		     default_mode.vrefresh,
 		     mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
 
-	jh057n_debugfs_init(ctx);
+	st7703_debugfs_init(ctx);
 	return 0;
 }
 
-static void jh057n_shutdown(struct mipi_dsi_device *dsi)
+static void st7703_shutdown(struct mipi_dsi_device *dsi)
 {
-	struct jh057n *ctx = mipi_dsi_get_drvdata(dsi);
+	struct st7703 *ctx = mipi_dsi_get_drvdata(dsi);
 	int ret;
 
 	ret = drm_panel_unprepare(&ctx->panel);
@@ -383,12 +385,12 @@ static void jh057n_shutdown(struct mipi_dsi_device *dsi)
 			      ret);
 }
 
-static int jh057n_remove(struct mipi_dsi_device *dsi)
+static int st7703_remove(struct mipi_dsi_device *dsi)
 {
-	struct jh057n *ctx = mipi_dsi_get_drvdata(dsi);
+	struct st7703 *ctx = mipi_dsi_get_drvdata(dsi);
 	int ret;
 
-	jh057n_shutdown(dsi);
+	st7703_shutdown(dsi);
 
 	ret = mipi_dsi_detach(dsi);
 	if (ret < 0)
@@ -397,28 +399,28 @@ static int jh057n_remove(struct mipi_dsi_device *dsi)
 
 	drm_panel_remove(&ctx->panel);
 
-	jh057n_debugfs_remove(ctx);
+	st7703_debugfs_remove(ctx);
 
 	return 0;
 }
 
-static const struct of_device_id jh057n_of_match[] = {
+static const struct of_device_id st7703_of_match[] = {
 	{ .compatible = "rocktech,jh057n00900" },
 	{ /* sentinel */ }
 };
-MODULE_DEVICE_TABLE(of, jh057n_of_match);
+MODULE_DEVICE_TABLE(of, st7703_of_match);
 
-static struct mipi_dsi_driver jh057n_driver = {
-	.probe	= jh057n_probe,
-	.remove = jh057n_remove,
-	.shutdown = jh057n_shutdown,
+static struct mipi_dsi_driver st7703_driver = {
+	.probe	= st7703_probe,
+	.remove = st7703_remove,
+	.shutdown = st7703_shutdown,
 	.driver = {
 		.name = DRV_NAME,
-		.of_match_table = jh057n_of_match,
+		.of_match_table = st7703_of_match,
 	},
 };
-module_mipi_dsi_driver(jh057n_driver);
+module_mipi_dsi_driver(st7703_driver);
 
 MODULE_AUTHOR("Guido Günther <agx@sigxcpu.org>");
-MODULE_DESCRIPTION("DRM driver for Rocktech JH057N00900 MIPI DSI panel");
+MODULE_DESCRIPTION("DRM driver for Sitronix ST7703 based MIPI DSI panels");
 MODULE_LICENSE("GPL v2");
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 26+ messages in thread

* [PATCH v5 06/13] drm/panel: st7703: Prepare for supporting multiple panels
  2020-06-26  0:55 [PATCH v5 00/13] Add support for PinePhone LCD panel Ondrej Jirman
                   ` (4 preceding siblings ...)
  2020-06-26  0:55 ` [PATCH v5 05/13] drm/panel: st7703: Rename functions from jh057n prefix " Ondrej Jirman
@ 2020-06-26  0:55 ` Ondrej Jirman
  2020-07-01  7:48   ` Linus Walleij
  2020-06-26  0:55 ` [PATCH v5 07/13] drm/panel: st7703: Move code specific to jh057n closer together Ondrej Jirman
                   ` (6 subsequent siblings)
  12 siblings, 1 reply; 26+ messages in thread
From: Ondrej Jirman @ 2020-06-26  0:55 UTC (permalink / raw)
  To: linux-sunxi, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Guido Günther, Purism Kernel Team,
	Rob Herring, Maxime Ripard, Chen-Yu Tsai, Linus Walleij,
	Icenowy Zheng
  Cc: Ondrej Jirman, dri-devel, devicetree, linux-kernel,
	linux-arm-kernel, Samuel Holland, Martijn Braam, Luca Weiss,
	Bhushan Shah

Parametrize the driver so that it can support more panels based
on st7703 controller.

Signed-off-by: Ondrej Jirman <megous@megous.com>
---
 drivers/gpu/drm/panel/panel-sitronix-st7703.c | 43 +++++++++++++------
 1 file changed, 31 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
index 511af659f273..08cbc316266c 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
@@ -13,6 +13,7 @@
 #include <linux/media-bus-format.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/regulator/consumer.h>
 
 #include <video/display_timing.h>
@@ -56,6 +57,15 @@ struct st7703 {
 	bool prepared;
 
 	struct dentry *debugfs;
+	const struct st7703_panel_desc *desc;
+};
+
+struct st7703_panel_desc {
+	const struct drm_display_mode *mode;
+	unsigned int lanes;
+	unsigned long mode_flags;
+	enum mipi_dsi_pixel_format format;
+	int (*init_sequence)(struct st7703 *ctx);
 };
 
 static inline struct st7703 *panel_to_st7703(struct drm_panel *panel)
@@ -148,7 +158,7 @@ static int st7703_enable(struct drm_panel *panel)
 	struct st7703 *ctx = panel_to_st7703(panel);
 	int ret;
 
-	ret = jh057n_init_sequence(ctx);
+	ret = ctx->desc->init_sequence(ctx);
 	if (ret < 0) {
 		DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n",
 			      ret);
@@ -216,7 +226,7 @@ static int st7703_prepare(struct drm_panel *panel)
 	return ret;
 }
 
-static const struct drm_display_mode default_mode = {
+static const struct drm_display_mode jh057n00900_mode = {
 	.hdisplay    = 720,
 	.hsync_start = 720 + 90,
 	.hsync_end   = 720 + 90 + 20,
@@ -232,17 +242,26 @@ static const struct drm_display_mode default_mode = {
 	.height_mm   = 130,
 };
 
+struct st7703_panel_desc jh057n00900_panel_desc = {
+	.mode = &jh057n00900_mode,
+	.lanes = 4,
+	.mode_flags = MIPI_DSI_MODE_VIDEO |
+		MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_VIDEO_SYNC_PULSE,
+	.format = MIPI_DSI_FMT_RGB888,
+	.init_sequence = jh057n_init_sequence,
+};
+
 static int st7703_get_modes(struct drm_panel *panel,
 			    struct drm_connector *connector)
 {
 	struct st7703 *ctx = panel_to_st7703(panel);
 	struct drm_display_mode *mode;
 
-	mode = drm_mode_duplicate(connector->dev, &default_mode);
+	mode = drm_mode_duplicate(connector->dev, ctx->desc->mode);
 	if (!mode) {
 		DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u\n",
-			      default_mode.hdisplay, default_mode.vdisplay,
-			      default_mode.vrefresh);
+			      ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay,
+			      ctx->desc->mode->vrefresh);
 		return -ENOMEM;
 	}
 
@@ -317,11 +336,11 @@ static int st7703_probe(struct mipi_dsi_device *dsi)
 	mipi_dsi_set_drvdata(dsi, ctx);
 
 	ctx->dev = dev;
+	ctx->desc = of_device_get_match_data(dev);
 
-	dsi->lanes = 4;
-	dsi->format = MIPI_DSI_FMT_RGB888;
-	dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
-		MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
+	dsi->mode_flags = ctx->desc->mode_flags;
+	dsi->format = ctx->desc->format;
+	dsi->lanes = ctx->desc->lanes;
 
 	ctx->vcc = devm_regulator_get(dev, "vcc");
 	if (IS_ERR(ctx->vcc)) {
@@ -361,8 +380,8 @@ static int st7703_probe(struct mipi_dsi_device *dsi)
 	}
 
 	DRM_DEV_INFO(dev, "%ux%u@%u %ubpp dsi %udl - ready\n",
-		     default_mode.hdisplay, default_mode.vdisplay,
-		     default_mode.vrefresh,
+		     ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay,
+		     ctx->desc->mode->vrefresh,
 		     mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
 
 	st7703_debugfs_init(ctx);
@@ -405,7 +424,7 @@ static int st7703_remove(struct mipi_dsi_device *dsi)
 }
 
 static const struct of_device_id st7703_of_match[] = {
-	{ .compatible = "rocktech,jh057n00900" },
+	{ .compatible = "rocktech,jh057n00900", .data = &jh057n00900_panel_desc },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, st7703_of_match);
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 26+ messages in thread

* [PATCH v5 07/13] drm/panel: st7703: Move code specific to jh057n closer together
  2020-06-26  0:55 [PATCH v5 00/13] Add support for PinePhone LCD panel Ondrej Jirman
                   ` (5 preceding siblings ...)
  2020-06-26  0:55 ` [PATCH v5 06/13] drm/panel: st7703: Prepare for supporting multiple panels Ondrej Jirman
@ 2020-06-26  0:55 ` Ondrej Jirman
  2020-07-01  7:49   ` Linus Walleij
  2020-06-26  0:55 ` [PATCH v5 08/13] drm/panel: st7703: Move generic part of init sequence to enable callback Ondrej Jirman
                   ` (5 subsequent siblings)
  12 siblings, 1 reply; 26+ messages in thread
From: Ondrej Jirman @ 2020-06-26  0:55 UTC (permalink / raw)
  To: linux-sunxi, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Guido Günther, Purism Kernel Team,
	Rob Herring, Maxime Ripard, Chen-Yu Tsai, Linus Walleij,
	Icenowy Zheng
  Cc: Ondrej Jirman, dri-devel, devicetree, linux-kernel,
	linux-arm-kernel, Samuel Holland, Martijn Braam, Luca Weiss,
	Bhushan Shah

It's better than having it spread around the driver.

Signed-off-by: Ondrej Jirman <megous@megous.com>
---
 drivers/gpu/drm/panel/panel-sitronix-st7703.c | 50 +++++++++----------
 1 file changed, 25 insertions(+), 25 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
index 08cbc316266c..d03aab10cfef 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
@@ -153,6 +153,31 @@ static int jh057n_init_sequence(struct st7703 *ctx)
 	return 0;
 }
 
+static const struct drm_display_mode jh057n00900_mode = {
+	.hdisplay    = 720,
+	.hsync_start = 720 + 90,
+	.hsync_end   = 720 + 90 + 20,
+	.htotal	     = 720 + 90 + 20 + 20,
+	.vdisplay    = 1440,
+	.vsync_start = 1440 + 20,
+	.vsync_end   = 1440 + 20 + 4,
+	.vtotal	     = 1440 + 20 + 4 + 12,
+	.vrefresh    = 60,
+	.clock	     = 75276,
+	.flags	     = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+	.width_mm    = 65,
+	.height_mm   = 130,
+};
+
+struct st7703_panel_desc jh057n00900_panel_desc = {
+	.mode = &jh057n00900_mode,
+	.lanes = 4,
+	.mode_flags = MIPI_DSI_MODE_VIDEO |
+		MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_VIDEO_SYNC_PULSE,
+	.format = MIPI_DSI_FMT_RGB888,
+	.init_sequence = jh057n_init_sequence,
+};
+
 static int st7703_enable(struct drm_panel *panel)
 {
 	struct st7703 *ctx = panel_to_st7703(panel);
@@ -226,31 +251,6 @@ static int st7703_prepare(struct drm_panel *panel)
 	return ret;
 }
 
-static const struct drm_display_mode jh057n00900_mode = {
-	.hdisplay    = 720,
-	.hsync_start = 720 + 90,
-	.hsync_end   = 720 + 90 + 20,
-	.htotal	     = 720 + 90 + 20 + 20,
-	.vdisplay    = 1440,
-	.vsync_start = 1440 + 20,
-	.vsync_end   = 1440 + 20 + 4,
-	.vtotal	     = 1440 + 20 + 4 + 12,
-	.vrefresh    = 60,
-	.clock	     = 75276,
-	.flags	     = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
-	.width_mm    = 65,
-	.height_mm   = 130,
-};
-
-struct st7703_panel_desc jh057n00900_panel_desc = {
-	.mode = &jh057n00900_mode,
-	.lanes = 4,
-	.mode_flags = MIPI_DSI_MODE_VIDEO |
-		MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_VIDEO_SYNC_PULSE,
-	.format = MIPI_DSI_FMT_RGB888,
-	.init_sequence = jh057n_init_sequence,
-};
-
 static int st7703_get_modes(struct drm_panel *panel,
 			    struct drm_connector *connector)
 {
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 26+ messages in thread

* [PATCH v5 08/13] drm/panel: st7703: Move generic part of init sequence to enable callback
  2020-06-26  0:55 [PATCH v5 00/13] Add support for PinePhone LCD panel Ondrej Jirman
                   ` (6 preceding siblings ...)
  2020-06-26  0:55 ` [PATCH v5 07/13] drm/panel: st7703: Move code specific to jh057n closer together Ondrej Jirman
@ 2020-06-26  0:55 ` Ondrej Jirman
  2020-07-01  7:50   ` Linus Walleij
  2020-06-26  0:55 ` [PATCH v5 09/13] drm/panel: st7703: Add support for Xingbangda XBD599 Ondrej Jirman
                   ` (4 subsequent siblings)
  12 siblings, 1 reply; 26+ messages in thread
From: Ondrej Jirman @ 2020-06-26  0:55 UTC (permalink / raw)
  To: linux-sunxi, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Guido Günther, Purism Kernel Team,
	Rob Herring, Maxime Ripard, Chen-Yu Tsai, Linus Walleij,
	Icenowy Zheng
  Cc: Ondrej Jirman, dri-devel, devicetree, linux-kernel,
	linux-arm-kernel, Samuel Holland, Martijn Braam, Luca Weiss,
	Bhushan Shah

Calling sleep out and display on is a controller specific part
of the initialization process. Move it out of the panel specific
initialization function to the enable callback.

Signed-off-by: Ondrej Jirman <megous@megous.com>
---
 drivers/gpu/drm/panel/panel-sitronix-st7703.c | 33 ++++++++++---------
 1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
index d03aab10cfef..cdbf7dfb4dd4 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
@@ -84,8 +84,6 @@ static inline struct st7703 *panel_to_st7703(struct drm_panel *panel)
 static int jh057n_init_sequence(struct st7703 *ctx)
 {
 	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
-	struct device *dev = ctx->dev;
-	int ret;
 
 	/*
 	 * Init sequence was supplied by the panel vendor. Most of the commands
@@ -136,20 +134,7 @@ static int jh057n_init_sequence(struct st7703 *ctx)
 			      0x18, 0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41,
 			      0x37, 0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10,
 			      0x11, 0x18);
-	msleep(20);
-
-	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
-	if (ret < 0) {
-		DRM_DEV_ERROR(dev, "Failed to exit sleep mode: %d\n", ret);
-		return ret;
-	}
-	/* Panel is operational 120 msec after reset */
-	msleep(60);
-	ret = mipi_dsi_dcs_set_display_on(dsi);
-	if (ret)
-		return ret;
 
-	DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done\n");
 	return 0;
 }
 
@@ -181,6 +166,7 @@ struct st7703_panel_desc jh057n00900_panel_desc = {
 static int st7703_enable(struct drm_panel *panel)
 {
 	struct st7703 *ctx = panel_to_st7703(panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
 	int ret;
 
 	ret = ctx->desc->init_sequence(ctx);
@@ -190,6 +176,23 @@ static int st7703_enable(struct drm_panel *panel)
 		return ret;
 	}
 
+	msleep(20);
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0) {
+		DRM_DEV_ERROR(ctx->dev, "Failed to exit sleep mode: %d\n", ret);
+		return ret;
+	}
+
+	/* Panel is operational 120 msec after reset */
+	msleep(60);
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret)
+		return ret;
+
+	DRM_DEV_DEBUG_DRIVER(ctx->dev, "Panel init sequence done\n");
+
 	return 0;
 }
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 26+ messages in thread

* [PATCH v5 09/13] drm/panel: st7703: Add support for Xingbangda XBD599
  2020-06-26  0:55 [PATCH v5 00/13] Add support for PinePhone LCD panel Ondrej Jirman
                   ` (7 preceding siblings ...)
  2020-06-26  0:55 ` [PATCH v5 08/13] drm/panel: st7703: Move generic part of init sequence to enable callback Ondrej Jirman
@ 2020-06-26  0:55 ` Ondrej Jirman
  2020-07-01  7:50   ` Linus Walleij
  2020-06-26  0:55 ` [PATCH v5 10/13] drm/panel: st7703: Enter sleep after display off Ondrej Jirman
                   ` (3 subsequent siblings)
  12 siblings, 1 reply; 26+ messages in thread
From: Ondrej Jirman @ 2020-06-26  0:55 UTC (permalink / raw)
  To: linux-sunxi, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Guido Günther, Purism Kernel Team,
	Rob Herring, Maxime Ripard, Chen-Yu Tsai, Linus Walleij,
	Icenowy Zheng
  Cc: Ondrej Jirman, dri-devel, devicetree, linux-kernel,
	linux-arm-kernel, Samuel Holland, Martijn Braam, Luca Weiss,
	Bhushan Shah

Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI LCD panel used in
PinePhone. Add support for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Ondrej Jirman <megous@megous.com>
---
 drivers/gpu/drm/panel/panel-sitronix-st7703.c | 199 +++++++++++++++++-
 1 file changed, 197 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
index cdbf7dfb4dd4..33611419059a 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
@@ -39,10 +39,11 @@
 #define ST7703_CMD_SETEXTC	 0xB9
 #define ST7703_CMD_SETMIPI	 0xBA
 #define ST7703_CMD_SETVDC	 0xBC
-#define ST7703_CMD_UNKNOWN0	 0xBF
+#define ST7703_CMD_UNKNOWN_BF	 0xBF
 #define ST7703_CMD_SETSCR	 0xC0
 #define ST7703_CMD_SETPOWER	 0xC1
 #define ST7703_CMD_SETPANEL	 0xCC
+#define ST7703_CMD_UNKNOWN_C6	 0xC6
 #define ST7703_CMD_SETGAMMA	 0xE0
 #define ST7703_CMD_SETEQ	 0xE3
 #define ST7703_CMD_SETGIP1	 0xE9
@@ -109,7 +110,7 @@ static int jh057n_init_sequence(struct st7703 *ctx)
 	msleep(20);
 
 	dsi_generic_write_seq(dsi, ST7703_CMD_SETVCOM, 0x3F, 0x3F);
-	dsi_generic_write_seq(dsi, ST7703_CMD_UNKNOWN0, 0x02, 0x11, 0x00);
+	dsi_generic_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
 	dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP1,
 			      0x82, 0x10, 0x06, 0x05, 0x9E, 0x0A, 0xA5, 0x12,
 			      0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
@@ -163,6 +164,199 @@ struct st7703_panel_desc jh057n00900_panel_desc = {
 	.init_sequence = jh057n_init_sequence,
 };
 
+#define dsi_dcs_write_seq(dsi, cmd, seq...) do {			\
+		static const u8 d[] = { seq };				\
+		int ret;						\
+		ret = mipi_dsi_dcs_write(dsi, cmd, d, ARRAY_SIZE(d));	\
+		if (ret < 0)						\
+			return ret;					\
+	} while (0)
+
+
+static int xbd599_init_sequence(struct st7703 *ctx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+	/*
+	 * Init sequence was supplied by the panel vendor.
+	 */
+
+	/* Magic sequence to unlock user commands below. */
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xF1, 0x12, 0x83);
+
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI,
+			  0x33, /* VC_main = 0, Lane_Number = 3 (4 lanes) */
+			  0x81, /* DSI_LDO_SEL = 1.7V, RTERM = 90 Ohm */
+			  0x05, /* IHSRX = x6 (Low High Speed driving ability) */
+			  0xF9, /* TX_CLK_SEL = fDSICLK/16 */
+			  0x0E, /* HFP_OSC (min. HFP number in DSI mode) */
+			  0x0E, /* HBP_OSC (min. HBP number in DSI mode) */
+			  /* The rest is undocumented in ST7703 datasheet */
+			  0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			  0x44, 0x25, 0x00, 0x91, 0x0a, 0x00, 0x00, 0x02,
+			  0x4F, 0x11, 0x00, 0x00, 0x37);
+
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT,
+			  0x25, /* PCCS = 2, ECP_DC_DIV = 1/4 HSYNC */
+			  0x22, /* DT = 15ms XDK_ECP = x2 */
+			  0x20, /* PFM_DC_DIV = /1 */
+			  0x03  /* ECP_SYNC_EN = 1, VGX_SYNC_EN = 1 */);
+
+	/* RGB I/F porch timing */
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF,
+			  0x10, /* VBP_RGB_GEN */
+			  0x10, /* VFP_RGB_GEN */
+			  0x05, /* DE_BP_RGB_GEN */
+			  0x05, /* DE_FP_RGB_GEN */
+			  /* The rest is undocumented in ST7703 datasheet */
+			  0x03, 0xFF,
+			  0x00, 0x00,
+			  0x00, 0x00);
+
+	/* Source driving settings. */
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR,
+			  0x73, /* N_POPON */
+			  0x73, /* N_NOPON */
+			  0x50, /* I_POPON */
+			  0x50, /* I_NOPON */
+			  0x00, /* SCR[31,24] */
+			  0xC0, /* SCR[23,16] */
+			  0x08, /* SCR[15,8] */
+			  0x70, /* SCR[7,0] */
+			  0x00  /* Undocumented */);
+
+	/* NVDDD_SEL = -1.8V, VDDD_SEL = out of range (possibly 1.9V?) */
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
+
+	/*
+	 * SS_PANEL = 1 (reverse scan), GS_PANEL = 0 (normal scan)
+	 * REV_PANEL = 1 (normally black panel), BGR_PANEL = 1 (BGR)
+	 */
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
+
+	/* Zig-Zag Type C column inversion. */
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
+
+	/* Set display resolution. */
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP,
+			  0xF0, /* NL = 240 */
+			  0x12, /* RES_V_LSB = 0, BLK_CON = VSSD,
+				 * RESO_SEL = 720RGB
+				 */
+			  0xF0  /* WHITE_GND_EN = 1 (GND),
+				 * WHITE_FRAME_SEL = 7 frames,
+				 * ISC = 0 frames
+				 */);
+
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ,
+			  0x00, /* PNOEQ */
+			  0x00, /* NNOEQ */
+			  0x0B, /* PEQGND */
+			  0x0B, /* NEQGND */
+			  0x10, /* PEQVCI */
+			  0x10, /* NEQVCI */
+			  0x00, /* PEQVCI1 */
+			  0x00, /* NEQVCI1 */
+			  0x00, /* reserved */
+			  0x00, /* reserved */
+			  0xFF, /* reserved */
+			  0x00, /* reserved */
+			  0xC0, /* ESD_DET_DATA_WHITE = 1, ESD_WHITE_EN = 1 */
+			  0x10  /* SLPIN_OPTION = 1 (no need vsync after sleep-in)
+				 * VEDIO_NO_CHECK_EN = 0
+				 * ESD_WHITE_GND_EN = 0
+				 * ESD_DET_TIME_SEL = 0 frames
+				 */);
+
+	/* Undocumented command. */
+	dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_C6, 0x01, 0x00, 0xFF, 0xFF, 0x00);
+
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER,
+			  0x74, /* VBTHS, VBTLS: VGH = 17V, VBL = -11V */
+			  0x00, /* FBOFF_VGH = 0, FBOFF_VGL = 0 */
+			  0x32, /* VRP  */
+			  0x32, /* VRN */
+			  0x77, /* reserved */
+			  0xF1, /* APS = 1 (small),
+				 * VGL_DET_EN = 1, VGH_DET_EN = 1,
+				 * VGL_TURBO = 1, VGH_TURBO = 1
+				 */
+			  0xFF, /* VGH1_L_DIV, VGL1_L_DIV (1.5MHz) */
+			  0xFF, /* VGH1_R_DIV, VGL1_R_DIV (1.5MHz) */
+			  0xCC, /* VGH2_L_DIV, VGL2_L_DIV (2.6MHz) */
+			  0xCC, /* VGH2_R_DIV, VGL2_R_DIV (2.6MHz) */
+			  0x77, /* VGH3_L_DIV, VGL3_L_DIV (4.5MHz) */
+			  0x77  /* VGH3_R_DIV, VGL3_R_DIV (4.5MHz) */);
+
+	/* Reference voltage. */
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP,
+			  0x07, /* VREF_SEL = 4.2V */
+			  0x07  /* NVREF_SEL = 4.2V */);
+
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM,
+			  0x2C, /* VCOMDC_F = -0.67V */
+			  0x2C  /* VCOMDC_B = -0.67V */);
+
+	/* Undocumented command. */
+	dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
+
+	/* This command is to set forward GIP timing. */
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1,
+			  0x82, 0x10, 0x06, 0x05, 0xA2, 0x0A, 0xA5, 0x12,
+			  0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
+			  0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00,
+			  0x03, 0x00, 0x00, 0x00, 0x75, 0x75, 0x31, 0x88,
+			  0x88, 0x88, 0x88, 0x88, 0x88, 0x13, 0x88, 0x64,
+			  0x64, 0x20, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
+			  0x02, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+
+	/* This command is to set backward GIP timing. */
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2,
+			  0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			  0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88,
+			  0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13,
+			  0x57, 0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
+			  0x75, 0x88, 0x23, 0x14, 0x00, 0x00, 0x02, 0x00,
+			  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x0A,
+			  0xA5, 0x00, 0x00, 0x00, 0x00);
+
+	/* Adjust the gamma characteristics of the panel. */
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA,
+			  0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41, 0x35,
+			  0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12, 0x12,
+			  0x18, 0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41,
+			  0x35, 0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12,
+			  0x12, 0x18);
+
+	return 0;
+}
+
+static const struct drm_display_mode xbd599_mode = {
+	.hdisplay    = 720,
+	.hsync_start = 720 + 40,
+	.hsync_end   = 720 + 40 + 40,
+	.htotal	     = 720 + 40 + 40 + 40,
+	.vdisplay    = 1440,
+	.vsync_start = 1440 + 18,
+	.vsync_end   = 1440 + 18 + 10,
+	.vtotal	     = 1440 + 18 + 10 + 17,
+	.vrefresh    = 60,
+	.clock	     = 69000,
+	.flags	     = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+	.width_mm    = 68,
+	.height_mm   = 136,
+};
+
+static const struct st7703_panel_desc xbd599_desc = {
+	.mode = &xbd599_mode,
+	.lanes = 4,
+	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE,
+	.format = MIPI_DSI_FMT_RGB888,
+	.init_sequence = xbd599_init_sequence,
+};
+
 static int st7703_enable(struct drm_panel *panel)
 {
 	struct st7703 *ctx = panel_to_st7703(panel);
@@ -428,6 +622,7 @@ static int st7703_remove(struct mipi_dsi_device *dsi)
 
 static const struct of_device_id st7703_of_match[] = {
 	{ .compatible = "rocktech,jh057n00900", .data = &jh057n00900_panel_desc },
+	{ .compatible = "xingbangda,xbd599", .data = &xbd599_desc },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, st7703_of_match);
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 26+ messages in thread

* [PATCH v5 10/13] drm/panel: st7703: Enter sleep after display off
  2020-06-26  0:55 [PATCH v5 00/13] Add support for PinePhone LCD panel Ondrej Jirman
                   ` (8 preceding siblings ...)
  2020-06-26  0:55 ` [PATCH v5 09/13] drm/panel: st7703: Add support for Xingbangda XBD599 Ondrej Jirman
@ 2020-06-26  0:55 ` Ondrej Jirman
  2020-07-01  7:51   ` Linus Walleij
  2020-06-26  0:55 ` [PATCH v5 11/13] drm/panel: st7703: Assert reset prior to powering down the regulators Ondrej Jirman
                   ` (2 subsequent siblings)
  12 siblings, 1 reply; 26+ messages in thread
From: Ondrej Jirman @ 2020-06-26  0:55 UTC (permalink / raw)
  To: linux-sunxi, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Guido Günther, Purism Kernel Team,
	Rob Herring, Maxime Ripard, Chen-Yu Tsai, Linus Walleij,
	Icenowy Zheng
  Cc: Ondrej Jirman, dri-devel, devicetree, linux-kernel,
	linux-arm-kernel, Samuel Holland, Martijn Braam, Luca Weiss,
	Bhushan Shah

The datasheet suggests to issue sleep in after display off
as a part of the panel's shutdown sequence.

Signed-off-by: Ondrej Jirman <megous@megous.com>
---
 drivers/gpu/drm/panel/panel-sitronix-st7703.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
index 33611419059a..e771281eb547 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
@@ -394,8 +394,19 @@ static int st7703_disable(struct drm_panel *panel)
 {
 	struct st7703 *ctx = panel_to_st7703(panel);
 	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int ret;
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret < 0)
+		DRM_DEV_ERROR(ctx->dev,
+			      "Failed to turn off the display: %d\n", ret);
 
-	return mipi_dsi_dcs_set_display_off(dsi);
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret < 0)
+		DRM_DEV_ERROR(ctx->dev,
+			      "Failed to enter sleep mode: %d\n", ret);
+
+	return 0;
 }
 
 static int st7703_unprepare(struct drm_panel *panel)
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 26+ messages in thread

* [PATCH v5 11/13] drm/panel: st7703: Assert reset prior to powering down the regulators
  2020-06-26  0:55 [PATCH v5 00/13] Add support for PinePhone LCD panel Ondrej Jirman
                   ` (9 preceding siblings ...)
  2020-06-26  0:55 ` [PATCH v5 10/13] drm/panel: st7703: Enter sleep after display off Ondrej Jirman
@ 2020-06-26  0:55 ` Ondrej Jirman
  2020-07-01  7:51   ` Linus Walleij
  2020-06-26  0:56 ` [PATCH v5 12/13] arm64: dts: sun50i-a64-pinephone: Enable LCD support on PinePhone Ondrej Jirman
  2020-06-26  0:56 ` [PATCH v5 13/13] arm64: dts: sun50i-a64-pinephone: Add touchscreen support Ondrej Jirman
  12 siblings, 1 reply; 26+ messages in thread
From: Ondrej Jirman @ 2020-06-26  0:55 UTC (permalink / raw)
  To: linux-sunxi, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Guido Günther, Purism Kernel Team,
	Rob Herring, Maxime Ripard, Chen-Yu Tsai, Linus Walleij,
	Icenowy Zheng
  Cc: Ondrej Jirman, dri-devel, devicetree, linux-kernel,
	linux-arm-kernel, Samuel Holland, Martijn Braam, Luca Weiss,
	Bhushan Shah

The reset pin is inverted, so if we don't assert reset, the actual gpio
will be high and may keep driving the IO port of the panel.

Signed-off-by: Ondrej Jirman <megous@megous.com>
---
 drivers/gpu/drm/panel/panel-sitronix-st7703.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
index e771281eb547..92930e127559 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
@@ -416,6 +416,7 @@ static int st7703_unprepare(struct drm_panel *panel)
 	if (!ctx->prepared)
 		return 0;
 
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
 	regulator_disable(ctx->iovcc);
 	regulator_disable(ctx->vcc);
 	ctx->prepared = false;
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 26+ messages in thread

* [PATCH v5 12/13] arm64: dts: sun50i-a64-pinephone: Enable LCD support on PinePhone
  2020-06-26  0:55 [PATCH v5 00/13] Add support for PinePhone LCD panel Ondrej Jirman
                   ` (10 preceding siblings ...)
  2020-06-26  0:55 ` [PATCH v5 11/13] drm/panel: st7703: Assert reset prior to powering down the regulators Ondrej Jirman
@ 2020-06-26  0:56 ` Ondrej Jirman
  2020-07-01  7:52   ` Linus Walleij
  2020-06-26  0:56 ` [PATCH v5 13/13] arm64: dts: sun50i-a64-pinephone: Add touchscreen support Ondrej Jirman
  12 siblings, 1 reply; 26+ messages in thread
From: Ondrej Jirman @ 2020-06-26  0:56 UTC (permalink / raw)
  To: linux-sunxi, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Guido Günther, Purism Kernel Team,
	Rob Herring, Maxime Ripard, Chen-Yu Tsai, Linus Walleij,
	Icenowy Zheng
  Cc: dri-devel, devicetree, linux-kernel, linux-arm-kernel,
	Samuel Holland, Martijn Braam, Luca Weiss, Bhushan Shah,
	Ondrej Jirman

From: Icenowy Zheng <icenowy@aosc.io>

PinePhone uses PWM backlight and a XBD599 LCD panel over DSI for
display.

Backlight levels curve was optimized by Martijn Braam using a
lux meter.

Add its device nodes.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Martijn Braam <martijn@brixit.nl>
Signed-off-by: Ondrej Jirman <megous@megous.com>
---
 .../allwinner/sun50i-a64-pinephone-1.1.dts    | 19 ++++++++++
 .../dts/allwinner/sun50i-a64-pinephone.dtsi   | 35 +++++++++++++++++++
 2 files changed, 54 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
index 06a775c41664..3e99a87e9ce5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
@@ -9,3 +9,22 @@ / {
 	model = "Pine64 PinePhone Braveheart (1.1)";
 	compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64";
 };
+
+&backlight {
+	power-supply = <&reg_ldo_io0>;
+	/*
+	 * PWM backlight circuit on this PinePhone revision was changed since
+	 * 1.0, and the lowest PWM duty cycle that doesn't lead to backlight
+	 * being off is around 20%. Duty cycle for the lowest brightness level
+	 * also varries quite a bit between individual boards, so the lowest
+	 * value here was chosen as a safe default.
+	 */
+	brightness-levels = <
+		774  793  814  842
+		882  935  1003 1088
+		1192 1316 1462 1633
+		1830 2054 2309 2596
+		2916 3271 3664 4096>;
+	num-interpolated-steps = <50>;
+	default-brightness-level = <400>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
index cefda145c3c9..85a7aa5efd32 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -16,6 +16,13 @@ aliases {
 		serial0 = &uart0;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
+		enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+		/* Backlight configuration differs per PinePhone revision. */
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -84,6 +91,30 @@ &dai {
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
+&dphy {
+	status = "okay";
+};
+
+&dsi {
+	vcc-dsi-supply = <&reg_dldo1>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "xingbangda,xbd599";
+		reg = <0>;
+		reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */
+		iovcc-supply = <&reg_dldo2>;
+		vcc-supply = <&reg_ldo_io0>;
+		backlight = <&backlight>;
+	};
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -188,6 +219,10 @@ &r_pio {
 	 */
 };
 
+&r_pwm {
+	status = "okay";
+};
+
 &r_rsb {
 	status = "okay";
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 26+ messages in thread

* [PATCH v5 13/13] arm64: dts: sun50i-a64-pinephone: Add touchscreen support
  2020-06-26  0:55 [PATCH v5 00/13] Add support for PinePhone LCD panel Ondrej Jirman
                   ` (11 preceding siblings ...)
  2020-06-26  0:56 ` [PATCH v5 12/13] arm64: dts: sun50i-a64-pinephone: Enable LCD support on PinePhone Ondrej Jirman
@ 2020-06-26  0:56 ` Ondrej Jirman
  2020-07-01  7:52   ` Linus Walleij
  12 siblings, 1 reply; 26+ messages in thread
From: Ondrej Jirman @ 2020-06-26  0:56 UTC (permalink / raw)
  To: linux-sunxi, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Guido Günther, Purism Kernel Team,
	Rob Herring, Maxime Ripard, Chen-Yu Tsai, Linus Walleij,
	Icenowy Zheng
  Cc: Ondrej Jirman, dri-devel, devicetree, linux-kernel,
	linux-arm-kernel, Samuel Holland, Martijn Braam, Luca Weiss,
	Bhushan Shah

Pinephone has a Goodix GT917S capacitive touchscreen controller on
I2C0 bus. Add support for it.

Signed-off-by: Ondrej Jirman <megous@megous.com>
---
 .../dts/allwinner/sun50i-a64-pinephone.dtsi   | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
index 85a7aa5efd32..2d5694446d17 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -123,6 +123,25 @@ &ehci1 {
 	status = "okay";
 };
 
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt917s", "goodix,gt911";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
+		irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+		reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+		AVDD28-supply = <&reg_ldo_io0>;
+		VDDIO-supply = <&reg_ldo_io0>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1440>;
+	};
+};
+
 &i2c1 {
 	status = "okay";
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 26+ messages in thread

* Re: [PATCH v5 02/13] dt-bindings: panel: Convert rocktech, jh057n00900 to yaml
  2020-06-26  0:55 ` [PATCH v5 02/13] dt-bindings: panel: Convert rocktech,jh057n00900 to yaml Ondrej Jirman
@ 2020-06-29 22:02   ` Rob Herring
  0 siblings, 0 replies; 26+ messages in thread
From: Rob Herring @ 2020-06-29 22:02 UTC (permalink / raw)
  To: Ondrej Jirman
  Cc: Samuel Holland, David Airlie, linux-kernel, Icenowy Zheng,
	devicetree, Linus Walleij, Maxime Ripard, Bhushan Shah,
	Sam Ravnborg, Luca Weiss, Rob Herring, linux-arm-kernel,
	Chen-Yu Tsai, Daniel Vetter, Guido Günther, Thierry Reding,
	Martijn Braam, dri-devel, Purism Kernel Team, linux-sunxi

On Fri, 26 Jun 2020 02:55:50 +0200, Ondrej Jirman wrote:
> Convert Rocktech MIPI DSI panel driver from txt to yaml bindings.
> 
> Signed-off-by: Ondrej Jirman <megous@megous.com>
> ---
>  .../display/panel/rocktech,jh057n00900.txt    | 23 -------
>  .../display/panel/rocktech,jh057n00900.yaml   | 66 +++++++++++++++++++
>  2 files changed, 66 insertions(+), 23 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
>  create mode 100644 Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml:  while scanning a block scalar
  in "<unicode string>", line 51, column 5
found a tab character where an indentation space is expected
  in "<unicode string>", line 58, column 1
Documentation/devicetree/bindings/Makefile:20: recipe for target 'Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.example.dts' failed
make[1]: *** [Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml: ignoring, error parsing file
warning: no schema found in file: ./Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml: ignoring, error parsing file
warning: no schema found in file: ./Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
Makefile:1347: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2


See https://patchwork.ozlabs.org/patch/1317299

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.


^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: [PATCH v5 04/13] drm/panel: rocktech-jh057n00900: Rename the driver to st7703
  2020-06-26  0:55 ` [PATCH v5 04/13] drm/panel: rocktech-jh057n00900: Rename the driver to st7703 Ondrej Jirman
@ 2020-07-01  7:47   ` Linus Walleij
  0 siblings, 0 replies; 26+ messages in thread
From: Linus Walleij @ 2020-07-01  7:47 UTC (permalink / raw)
  To: Ondrej Jirman
  Cc: linux-sunxi, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Guido Günther, Purism Kernel Team,
	Rob Herring, Maxime Ripard, Chen-Yu Tsai, Icenowy Zheng,
	open list:DRM PANEL DRIVERS,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-kernel, Linux ARM, Samuel Holland, Martijn Braam,
	Luca Weiss, Bhushan Shah

On Fri, Jun 26, 2020 at 2:56 AM Ondrej Jirman <megous@megous.com> wrote:

> This rename is done so that the driver matches the name of the
> display controller and in preparation for adding support for more
> panels to the driver.
>
> This is just a basic file rename, with no code changes.
>
> Signed-off-by: Ondrej Jirman <megous@megous.com>

This is the right thing to do.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: [PATCH v5 05/13] drm/panel: st7703: Rename functions from jh057n prefix to st7703
  2020-06-26  0:55 ` [PATCH v5 05/13] drm/panel: st7703: Rename functions from jh057n prefix " Ondrej Jirman
@ 2020-07-01  7:48   ` Linus Walleij
  0 siblings, 0 replies; 26+ messages in thread
From: Linus Walleij @ 2020-07-01  7:48 UTC (permalink / raw)
  To: Ondrej Jirman
  Cc: linux-sunxi, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Guido Günther, Purism Kernel Team,
	Rob Herring, Maxime Ripard, Chen-Yu Tsai, Icenowy Zheng,
	open list:DRM PANEL DRIVERS,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-kernel, Linux ARM, Samuel Holland, Martijn Braam,
	Luca Weiss, Bhushan Shah

On Fri, Jun 26, 2020 at 2:56 AM Ondrej Jirman <megous@megous.com> wrote:

> This is done so that code that's not specific to a particular
> jh057n panel is named after the controller. Functions specific
> to the panel are kept named after the panel.
>
> Signed-off-by: Ondrej Jirman <megous@megous.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: [PATCH v5 06/13] drm/panel: st7703: Prepare for supporting multiple panels
  2020-06-26  0:55 ` [PATCH v5 06/13] drm/panel: st7703: Prepare for supporting multiple panels Ondrej Jirman
@ 2020-07-01  7:48   ` Linus Walleij
  0 siblings, 0 replies; 26+ messages in thread
From: Linus Walleij @ 2020-07-01  7:48 UTC (permalink / raw)
  To: Ondrej Jirman
  Cc: linux-sunxi, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Guido Günther, Purism Kernel Team,
	Rob Herring, Maxime Ripard, Chen-Yu Tsai, Icenowy Zheng,
	open list:DRM PANEL DRIVERS,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-kernel, Linux ARM, Samuel Holland, Martijn Braam,
	Luca Weiss, Bhushan Shah

On Fri, Jun 26, 2020 at 2:56 AM Ondrej Jirman <megous@megous.com> wrote:

> Parametrize the driver so that it can support more panels based
> on st7703 controller.
>
> Signed-off-by: Ondrej Jirman <megous@megous.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: [PATCH v5 07/13] drm/panel: st7703: Move code specific to jh057n closer together
  2020-06-26  0:55 ` [PATCH v5 07/13] drm/panel: st7703: Move code specific to jh057n closer together Ondrej Jirman
@ 2020-07-01  7:49   ` Linus Walleij
  0 siblings, 0 replies; 26+ messages in thread
From: Linus Walleij @ 2020-07-01  7:49 UTC (permalink / raw)
  To: Ondrej Jirman
  Cc: linux-sunxi, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Guido Günther, Purism Kernel Team,
	Rob Herring, Maxime Ripard, Chen-Yu Tsai, Icenowy Zheng,
	open list:DRM PANEL DRIVERS,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-kernel, Linux ARM, Samuel Holland, Martijn Braam,
	Luca Weiss, Bhushan Shah

On Fri, Jun 26, 2020 at 2:56 AM Ondrej Jirman <megous@megous.com> wrote:

> It's better than having it spread around the driver.
>
> Signed-off-by: Ondrej Jirman <megous@megous.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: [PATCH v5 08/13] drm/panel: st7703: Move generic part of init sequence to enable callback
  2020-06-26  0:55 ` [PATCH v5 08/13] drm/panel: st7703: Move generic part of init sequence to enable callback Ondrej Jirman
@ 2020-07-01  7:50   ` Linus Walleij
  0 siblings, 0 replies; 26+ messages in thread
From: Linus Walleij @ 2020-07-01  7:50 UTC (permalink / raw)
  To: Ondrej Jirman
  Cc: linux-sunxi, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Guido Günther, Purism Kernel Team,
	Rob Herring, Maxime Ripard, Chen-Yu Tsai, Icenowy Zheng,
	open list:DRM PANEL DRIVERS,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-kernel, Linux ARM, Samuel Holland, Martijn Braam,
	Luca Weiss, Bhushan Shah

On Fri, Jun 26, 2020 at 2:56 AM Ondrej Jirman <megous@megous.com> wrote:

> Calling sleep out and display on is a controller specific part
> of the initialization process. Move it out of the panel specific
> initialization function to the enable callback.
>
> Signed-off-by: Ondrej Jirman <megous@megous.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: [PATCH v5 09/13] drm/panel: st7703: Add support for Xingbangda XBD599
  2020-06-26  0:55 ` [PATCH v5 09/13] drm/panel: st7703: Add support for Xingbangda XBD599 Ondrej Jirman
@ 2020-07-01  7:50   ` Linus Walleij
  2020-07-01 10:34     ` Ondřej Jirman
  0 siblings, 1 reply; 26+ messages in thread
From: Linus Walleij @ 2020-07-01  7:50 UTC (permalink / raw)
  To: Ondrej Jirman
  Cc: linux-sunxi, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Guido Günther, Purism Kernel Team,
	Rob Herring, Maxime Ripard, Chen-Yu Tsai, Icenowy Zheng,
	open list:DRM PANEL DRIVERS,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-kernel, Linux ARM, Samuel Holland, Martijn Braam,
	Luca Weiss, Bhushan Shah

On Fri, Jun 26, 2020 at 2:56 AM Ondrej Jirman <megous@megous.com> wrote:

> Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI LCD panel used in
> PinePhone. Add support for it.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> Signed-off-by: Ondrej Jirman <megous@megous.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: [PATCH v5 10/13] drm/panel: st7703: Enter sleep after display off
  2020-06-26  0:55 ` [PATCH v5 10/13] drm/panel: st7703: Enter sleep after display off Ondrej Jirman
@ 2020-07-01  7:51   ` Linus Walleij
  0 siblings, 0 replies; 26+ messages in thread
From: Linus Walleij @ 2020-07-01  7:51 UTC (permalink / raw)
  To: Ondrej Jirman
  Cc: linux-sunxi, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Guido Günther, Purism Kernel Team,
	Rob Herring, Maxime Ripard, Chen-Yu Tsai, Icenowy Zheng,
	open list:DRM PANEL DRIVERS,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-kernel, Linux ARM, Samuel Holland, Martijn Braam,
	Luca Weiss, Bhushan Shah

On Fri, Jun 26, 2020 at 2:56 AM Ondrej Jirman <megous@megous.com> wrote:

> The datasheet suggests to issue sleep in after display off
> as a part of the panel's shutdown sequence.
>
> Signed-off-by: Ondrej Jirman <megous@megous.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: [PATCH v5 11/13] drm/panel: st7703: Assert reset prior to powering down the regulators
  2020-06-26  0:55 ` [PATCH v5 11/13] drm/panel: st7703: Assert reset prior to powering down the regulators Ondrej Jirman
@ 2020-07-01  7:51   ` Linus Walleij
  0 siblings, 0 replies; 26+ messages in thread
From: Linus Walleij @ 2020-07-01  7:51 UTC (permalink / raw)
  To: Ondrej Jirman
  Cc: linux-sunxi, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Guido Günther, Purism Kernel Team,
	Rob Herring, Maxime Ripard, Chen-Yu Tsai, Icenowy Zheng,
	open list:DRM PANEL DRIVERS,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-kernel, Linux ARM, Samuel Holland, Martijn Braam,
	Luca Weiss, Bhushan Shah

On Fri, Jun 26, 2020 at 2:56 AM Ondrej Jirman <megous@megous.com> wrote:

> The reset pin is inverted, so if we don't assert reset, the actual gpio
> will be high and may keep driving the IO port of the panel.
>
> Signed-off-by: Ondrej Jirman <megous@megous.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: [PATCH v5 12/13] arm64: dts: sun50i-a64-pinephone: Enable LCD support on PinePhone
  2020-06-26  0:56 ` [PATCH v5 12/13] arm64: dts: sun50i-a64-pinephone: Enable LCD support on PinePhone Ondrej Jirman
@ 2020-07-01  7:52   ` Linus Walleij
  0 siblings, 0 replies; 26+ messages in thread
From: Linus Walleij @ 2020-07-01  7:52 UTC (permalink / raw)
  To: Ondrej Jirman
  Cc: linux-sunxi, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Guido Günther, Purism Kernel Team,
	Rob Herring, Maxime Ripard, Chen-Yu Tsai, Icenowy Zheng,
	open list:DRM PANEL DRIVERS,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-kernel, Linux ARM, Samuel Holland, Martijn Braam,
	Luca Weiss, Bhushan Shah

On Fri, Jun 26, 2020 at 2:56 AM Ondrej Jirman <megous@megous.com> wrote:

> From: Icenowy Zheng <icenowy@aosc.io>
>
> PinePhone uses PWM backlight and a XBD599 LCD panel over DSI for
> display.
>
> Backlight levels curve was optimized by Martijn Braam using a
> lux meter.
>
> Add its device nodes.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> Signed-off-by: Martijn Braam <martijn@brixit.nl>
> Signed-off-by: Ondrej Jirman <megous@megous.com>

Acked-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: [PATCH v5 13/13] arm64: dts: sun50i-a64-pinephone: Add touchscreen support
  2020-06-26  0:56 ` [PATCH v5 13/13] arm64: dts: sun50i-a64-pinephone: Add touchscreen support Ondrej Jirman
@ 2020-07-01  7:52   ` Linus Walleij
  0 siblings, 0 replies; 26+ messages in thread
From: Linus Walleij @ 2020-07-01  7:52 UTC (permalink / raw)
  To: Ondrej Jirman
  Cc: linux-sunxi, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Guido Günther, Purism Kernel Team,
	Rob Herring, Maxime Ripard, Chen-Yu Tsai, Icenowy Zheng,
	open list:DRM PANEL DRIVERS,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-kernel, Linux ARM, Samuel Holland, Martijn Braam,
	Luca Weiss, Bhushan Shah

On Fri, Jun 26, 2020 at 2:56 AM Ondrej Jirman <megous@megous.com> wrote:

> Pinephone has a Goodix GT917S capacitive touchscreen controller on
> I2C0 bus. Add support for it.
>
> Signed-off-by: Ondrej Jirman <megous@megous.com>

Acked-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: [PATCH v5 09/13] drm/panel: st7703: Add support for Xingbangda XBD599
  2020-07-01  7:50   ` Linus Walleij
@ 2020-07-01 10:34     ` Ondřej Jirman
  0 siblings, 0 replies; 26+ messages in thread
From: Ondřej Jirman @ 2020-07-01 10:34 UTC (permalink / raw)
  To: Linus Walleij
  Cc: linux-sunxi, Thierry Reding, Sam Ravnborg, David Airlie,
	Daniel Vetter, Guido Günther, Purism Kernel Team,
	Rob Herring, Maxime Ripard, Chen-Yu Tsai, Icenowy Zheng,
	open list:DRM PANEL DRIVERS,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-kernel, Linux ARM, Samuel Holland, Martijn Braam,
	Luca Weiss, Bhushan Shah

Hello Linus,

On Wed, Jul 01, 2020 at 09:50:40AM +0200, Linus Walleij wrote:
> On Fri, Jun 26, 2020 at 2:56 AM Ondrej Jirman <megous@megous.com> wrote:
> 
> > Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI LCD panel used in
> > PinePhone. Add support for it.
> >
> > Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> > Signed-off-by: Ondrej Jirman <megous@megous.com>
> 
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Thank you very much for the review. :)

I've sent v6 which should fix the currently remaining issues with dt bindings
+ one timing issue I've found in this patch. I've kept your reviewed-by tag,
because it's a fairly trivial issue. But feel free to complain.

thank you again and regards,
	o.

> Yours,
> Linus Walleij

^ permalink raw reply	[flat|nested] 26+ messages in thread

end of thread, other threads:[~2020-07-01 10:34 UTC | newest]

Thread overview: 26+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-26  0:55 [PATCH v5 00/13] Add support for PinePhone LCD panel Ondrej Jirman
2020-06-26  0:55 ` [PATCH v5 01/13] dt-bindings: vendor-prefixes: Add Xingbangda Ondrej Jirman
2020-06-26  0:55 ` [PATCH v5 02/13] dt-bindings: panel: Convert rocktech,jh057n00900 to yaml Ondrej Jirman
2020-06-29 22:02   ` [PATCH v5 02/13] dt-bindings: panel: Convert rocktech, jh057n00900 " Rob Herring
2020-06-26  0:55 ` [PATCH v5 03/13] dt-bindings: panel: Add compatible for Xingbangda XBD599 panel Ondrej Jirman
2020-06-26  0:55 ` [PATCH v5 04/13] drm/panel: rocktech-jh057n00900: Rename the driver to st7703 Ondrej Jirman
2020-07-01  7:47   ` Linus Walleij
2020-06-26  0:55 ` [PATCH v5 05/13] drm/panel: st7703: Rename functions from jh057n prefix " Ondrej Jirman
2020-07-01  7:48   ` Linus Walleij
2020-06-26  0:55 ` [PATCH v5 06/13] drm/panel: st7703: Prepare for supporting multiple panels Ondrej Jirman
2020-07-01  7:48   ` Linus Walleij
2020-06-26  0:55 ` [PATCH v5 07/13] drm/panel: st7703: Move code specific to jh057n closer together Ondrej Jirman
2020-07-01  7:49   ` Linus Walleij
2020-06-26  0:55 ` [PATCH v5 08/13] drm/panel: st7703: Move generic part of init sequence to enable callback Ondrej Jirman
2020-07-01  7:50   ` Linus Walleij
2020-06-26  0:55 ` [PATCH v5 09/13] drm/panel: st7703: Add support for Xingbangda XBD599 Ondrej Jirman
2020-07-01  7:50   ` Linus Walleij
2020-07-01 10:34     ` Ondřej Jirman
2020-06-26  0:55 ` [PATCH v5 10/13] drm/panel: st7703: Enter sleep after display off Ondrej Jirman
2020-07-01  7:51   ` Linus Walleij
2020-06-26  0:55 ` [PATCH v5 11/13] drm/panel: st7703: Assert reset prior to powering down the regulators Ondrej Jirman
2020-07-01  7:51   ` Linus Walleij
2020-06-26  0:56 ` [PATCH v5 12/13] arm64: dts: sun50i-a64-pinephone: Enable LCD support on PinePhone Ondrej Jirman
2020-07-01  7:52   ` Linus Walleij
2020-06-26  0:56 ` [PATCH v5 13/13] arm64: dts: sun50i-a64-pinephone: Add touchscreen support Ondrej Jirman
2020-07-01  7:52   ` Linus Walleij

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).