linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] Replace HTTP links with HTTPS ones: Documentation/admin-guide
@ 2020-06-21 13:20 Alexander A. Klimov
  2020-06-21 22:04 ` Pavel Machek
  2020-06-26 17:02 ` Jonathan Corbet
  0 siblings, 2 replies; 8+ messages in thread
From: Alexander A. Klimov @ 2020-06-21 13:20 UTC (permalink / raw)
  To: corbet, changbin.du, masahiroy, rostedt, j.neuschaefer,
	andy.shevchenko, mchehab+samsung, logang, abbotti,
	jacob.e.keller, colin.king, gregkh, mgreer, tytso, jack,
	ebiggers, tglx, akpm, paulmck, pawan.kumar.gupta, jgross,
	mike.kravetz, cohuck, jacek.anaszewski, pavel, alex, dwlsalmeida,
	dsterba, linux-doc, linux-kernel
  Cc: Alexander A. Klimov

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
          If both the HTTP and HTTPS versions
          return 200 OK and serve the same content:
            Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
---
 Documentation/admin-guide/README.rst                        | 2 +-
 Documentation/admin-guide/dell_rbu.rst                      | 2 +-
 Documentation/admin-guide/devices.txt                       | 6 +++---
 Documentation/admin-guide/ext4.rst                          | 4 ++--
 Documentation/admin-guide/kernel-parameters.txt             | 2 +-
 Documentation/admin-guide/laptops/disk-shock-protection.rst | 2 +-
 Documentation/admin-guide/laptops/sonypi.rst                | 2 +-
 Documentation/admin-guide/laptops/thinkpad-acpi.rst         | 6 +++---
 Documentation/admin-guide/mm/ksm.rst                        | 2 +-
 Documentation/admin-guide/nfs/nfs-client.rst                | 4 ++--
 Documentation/admin-guide/nfs/nfs-rdma.rst                  | 2 +-
 Documentation/admin-guide/nfs/nfsroot.rst                   | 6 +++---
 Documentation/admin-guide/sysctl/fs.rst                     | 2 +-
 13 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/Documentation/admin-guide/README.rst b/Documentation/admin-guide/README.rst
index 5fb526900023..7186ed9b42fe 100644
--- a/Documentation/admin-guide/README.rst
+++ b/Documentation/admin-guide/README.rst
@@ -1,6 +1,6 @@
 .. _readme:
 
-Linux kernel release 5.x <http://kernel.org/>
+Linux kernel release 5.x <https://kernel.org/>
 =============================================
 
 These are the release notes for Linux version 5.  Read them carefully,
diff --git a/Documentation/admin-guide/dell_rbu.rst b/Documentation/admin-guide/dell_rbu.rst
index 8d70e1fc9f9d..2196caf1b939 100644
--- a/Documentation/admin-guide/dell_rbu.rst
+++ b/Documentation/admin-guide/dell_rbu.rst
@@ -26,7 +26,7 @@ Please go to  http://support.dell.com register and you can find info on
 OpenManage and Dell Update packages (DUP).
 
 Libsmbios can also be used to update BIOS on Dell systems go to
-http://linux.dell.com/libsmbios/ for details.
+https://linux.dell.com/libsmbios/ for details.
 
 Dell_RBU driver supports BIOS update using the monolithic image and packetized
 image methods. In case of monolithic the driver allocates a contiguous chunk
diff --git a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt
index 2a97aaec8b12..a622dfec92a4 100644
--- a/Documentation/admin-guide/devices.txt
+++ b/Documentation/admin-guide/devices.txt
@@ -1442,7 +1442,7 @@
 		    ...
 
 		The driver and documentation may be obtained from
-		http://www.winradio.com/
+		https://www.winradio.com/
 
   82 block	I2O hard disk
 		  0 = /dev/i2o/hdag	33rd I2O hard disk, whole disk
@@ -1656,7 +1656,7 @@
 		dynamically, so there is no fixed mapping from subdevice
 		pathnames to minor numbers.
 
-		See http://www.comedi.org/ for information about the Comedi
+		See https://www.comedi.org/ for information about the Comedi
 		project.
 
   98 block	User-mode virtual block device
@@ -1723,7 +1723,7 @@
 		implementations a kernel presence for caching and easy
 		mounting.  For more information about the project,
 		write to <arla-drinkers@stacken.kth.se> or see
-		http://www.stacken.kth.se/project/arla/
+		https://www.stacken.kth.se/project/arla/
 
  103 block	Audit device
 		  0 = /dev/audit	Audit device
diff --git a/Documentation/admin-guide/ext4.rst b/Documentation/admin-guide/ext4.rst
index 9443fcef1876..bc3abfb33476 100644
--- a/Documentation/admin-guide/ext4.rst
+++ b/Documentation/admin-guide/ext4.rst
@@ -611,7 +611,7 @@ kernel source:	<file:fs/ext4/>
 
 programs:	http://e2fsprogs.sourceforge.net/
 
-useful links:	http://fedoraproject.org/wiki/ext3-devel
+useful links:	https://fedoraproject.org/wiki/ext3-devel
 		http://www.bullopensource.org/ext4/
 		http://ext4.wiki.kernel.org/index.php/Main_Page
-		http://fedoraproject.org/wiki/Features/Ext4
+		https://fedoraproject.org/wiki/Features/Ext4
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index fb95fad81c79..b333ba5cb144 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2786,7 +2786,7 @@
 			touchscreen support is not enabled in the mainstream
 			kernel as of 2.6.30, a preliminary port can be found
 			in the "bleeding edge" mini2440 support kernel at
-			http://repo.or.cz/w/linux-2.6/mini2440.git
+			https://repo.or.cz/w/linux-2.6/mini2440.git
 
 	mitigations=
 			[X86,PPC,S390,ARM64] Control optional mitigations for
diff --git a/Documentation/admin-guide/laptops/disk-shock-protection.rst b/Documentation/admin-guide/laptops/disk-shock-protection.rst
index e97c5f78d8c3..22c7ec3e84cf 100644
--- a/Documentation/admin-guide/laptops/disk-shock-protection.rst
+++ b/Documentation/admin-guide/laptops/disk-shock-protection.rst
@@ -135,7 +135,7 @@ single project which, although still considered experimental, is fit
 for use. Please feel free to add projects that have been the victims
 of my ignorance.
 
-- http://www.thinkwiki.org/wiki/HDAPS
+- https://www.thinkwiki.org/wiki/HDAPS
 
   See this page for information about Linux support of the hard disk
   active protection system as implemented in IBM/Lenovo Thinkpads.
diff --git a/Documentation/admin-guide/laptops/sonypi.rst b/Documentation/admin-guide/laptops/sonypi.rst
index c6eaaf48f7c1..190da1234314 100644
--- a/Documentation/admin-guide/laptops/sonypi.rst
+++ b/Documentation/admin-guide/laptops/sonypi.rst
@@ -151,7 +151,7 @@ Bugs:
 	  different way to adjust the backlighting of the screen. There
 	  is a userspace utility to adjust the brightness on those models,
 	  which can be downloaded from
-	  http://www.acc.umu.se/~erikw/program/smartdimmer-0.1.tar.bz2
+	  https://www.acc.umu.se/~erikw/program/smartdimmer-0.1.tar.bz2
 
 	- since all development was done by reverse engineering, there is
 	  *absolutely no guarantee* that this driver will not crash your
diff --git a/Documentation/admin-guide/laptops/thinkpad-acpi.rst b/Documentation/admin-guide/laptops/thinkpad-acpi.rst
index 822907dcc845..69b7ce905cba 100644
--- a/Documentation/admin-guide/laptops/thinkpad-acpi.rst
+++ b/Documentation/admin-guide/laptops/thinkpad-acpi.rst
@@ -904,7 +904,7 @@ temperatures:
 The mapping of thermal sensors to physical locations varies depending on
 system-board model (and thus, on ThinkPad model).
 
-http://thinkwiki.org/wiki/Thermal_Sensors is a public wiki page that
+https://thinkwiki.org/wiki/Thermal_Sensors is a public wiki page that
 tries to track down these locations for various models.
 
 Most (newer?) models seem to follow this pattern:
@@ -925,7 +925,7 @@ For the R51 (source: Thomas Gruber):
 - 3:  Internal HDD
 
 For the T43, T43/p (source: Shmidoax/Thinkwiki.org)
-http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_T43.2C_T43p
+https://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_T43.2C_T43p
 
 - 2:  System board, left side (near PCMCIA slot), reported as HDAPS temp
 - 3:  PCMCIA slot
@@ -935,7 +935,7 @@ http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_T43.2C_T43p
 - 11: Power regulator, underside of system board, below F2 key
 
 The A31 has a very atypical layout for the thermal sensors
-(source: Milos Popovic, http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_A31)
+(source: Milos Popovic, https://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_A31)
 
 - 1:  CPU
 - 2:  Main Battery: main sensor
diff --git a/Documentation/admin-guide/mm/ksm.rst b/Documentation/admin-guide/mm/ksm.rst
index 874eb0c77d34..e87bf0135edf 100644
--- a/Documentation/admin-guide/mm/ksm.rst
+++ b/Documentation/admin-guide/mm/ksm.rst
@@ -9,7 +9,7 @@ Overview
 
 KSM is a memory-saving de-duplication feature, enabled by CONFIG_KSM=y,
 added to the Linux kernel in 2.6.32.  See ``mm/ksm.c`` for its implementation,
-and http://lwn.net/Articles/306704/ and http://lwn.net/Articles/330589/
+and http://lwn.net/Articles/306704/ and https://lwn.net/Articles/330589/
 
 KSM was originally developed for use with KVM (where it was known as
 Kernel Shared Memory), to fit more virtual machines into physical memory,
diff --git a/Documentation/admin-guide/nfs/nfs-client.rst b/Documentation/admin-guide/nfs/nfs-client.rst
index c4b777c7584b..6adb6457bc69 100644
--- a/Documentation/admin-guide/nfs/nfs-client.rst
+++ b/Documentation/admin-guide/nfs/nfs-client.rst
@@ -65,8 +65,8 @@ migrated onto another server by means of the special "fs_locations"
 attribute. See `RFC3530 Section 6: Filesystem Migration and Replication`_ and
 `Implementation Guide for Referrals in NFSv4`_.
 
-.. _RFC3530 Section 6\: Filesystem Migration and Replication: http://tools.ietf.org/html/rfc3530#section-6
-.. _Implementation Guide for Referrals in NFSv4: http://tools.ietf.org/html/draft-ietf-nfsv4-referrals-00
+.. _RFC3530 Section 6\: Filesystem Migration and Replication: https://tools.ietf.org/html/rfc3530#section-6
+.. _Implementation Guide for Referrals in NFSv4: https://tools.ietf.org/html/draft-ietf-nfsv4-referrals-00
 
 The fs_locations information can take the form of either an ip address and
 a path, or a DNS hostname and a path. The latter requires the NFS client to
diff --git a/Documentation/admin-guide/nfs/nfs-rdma.rst b/Documentation/admin-guide/nfs/nfs-rdma.rst
index ef0f3678b1fb..f137485f8bde 100644
--- a/Documentation/admin-guide/nfs/nfs-rdma.rst
+++ b/Documentation/admin-guide/nfs/nfs-rdma.rst
@@ -65,7 +65,7 @@ use with NFS/RDMA.
   If the version is less than 1.1.2 or the command does not exist,
   you should install the latest version of nfs-utils.
 
-  Download the latest package from: http://www.kernel.org/pub/linux/utils/nfs
+  Download the latest package from: https://www.kernel.org/pub/linux/utils/nfs
 
   Uncompress the package and follow the installation instructions.
 
diff --git a/Documentation/admin-guide/nfs/nfsroot.rst b/Documentation/admin-guide/nfs/nfsroot.rst
index c6772075c80c..135218f33394 100644
--- a/Documentation/admin-guide/nfs/nfsroot.rst
+++ b/Documentation/admin-guide/nfs/nfsroot.rst
@@ -264,7 +264,7 @@ They depend on various facilities being available:
      	access to the floppy drive device, /dev/fd0
 
      	For more information on syslinux, including how to create bootdisks
-     	for prebuilt kernels, see http://syslinux.zytor.com/
+     	for prebuilt kernels, see https://syslinux.zytor.com/
 
 	.. note::
 		Previously it was possible to write a kernel directly to
@@ -292,7 +292,7 @@ They depend on various facilities being available:
 	  cdrecord dev=ATAPI:1,0,0 arch/x86/boot/image.iso
 
      	For more information on isolinux, including how to create bootdisks
-     	for prebuilt kernels, see http://syslinux.zytor.com/
+     	for prebuilt kernels, see https://syslinux.zytor.com/
 
 - Using LILO
 
@@ -346,7 +346,7 @@ They depend on various facilities being available:
 	see Documentation/admin-guide/serial-console.rst for more information.
 
 	For more information on isolinux, including how to create bootdisks
-	for prebuilt kernels, see http://syslinux.zytor.com/
+	for prebuilt kernels, see https://syslinux.zytor.com/
 
 
 
diff --git a/Documentation/admin-guide/sysctl/fs.rst b/Documentation/admin-guide/sysctl/fs.rst
index 2a45119e3331..f48277a0a850 100644
--- a/Documentation/admin-guide/sysctl/fs.rst
+++ b/Documentation/admin-guide/sysctl/fs.rst
@@ -261,7 +261,7 @@ directories like /tmp. The common method of exploitation of this flaw
 is to cross privilege boundaries when following a given symlink (i.e. a
 root process follows a symlink belonging to another user). For a likely
 incomplete list of hundreds of examples across the years, please see:
-http://cve.mitre.org/cgi-bin/cvekey.cgi?keyword=/tmp
+https://cve.mitre.org/cgi-bin/cvekey.cgi?keyword=/tmp
 
 When set to "0", symlink following behavior is unrestricted.
 
-- 
2.27.0


^ permalink raw reply	[flat|nested] 8+ messages in thread
* [PATCH] Replace HTTP links with HTTPS ones: Documentation/admin-guide
@ 2020-06-22 18:19 Alexander A. Klimov
  2020-06-22 18:38 ` Jonathan Neuschäfer
  0 siblings, 1 reply; 8+ messages in thread
From: Alexander A. Klimov @ 2020-06-22 18:19 UTC (permalink / raw)
  To: Jonathan Corbet, Steven Rostedt (VMware),
	Masahiro Yamada, Changbin Du, Alexander A. Klimov,
	Jonathan Neuschäfer, Logan Gunthorpe, Cornelia Huck,
	Mauro Carvalho Chehab, Colin Ian King, Ian Abbott, Jacob Keller,
	Greg Kroah-Hartman, Mark Greer, Theodore Ts'o, Eric Biggers,
	Jan Kara, Thomas Gleixner, Andrew Morton, Paul E. McKenney,
	Pawan Gupta, Juergen Gross, Mike Kravetz, Oliver Neukum,
	Andy Shevchenko, Jacek Anaszewski, Pavel Machek,
	Alexander Schremmer, Daniel W. S. Almeida, David Sterba,
	linux-doc, linux-kernel

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
          If both the HTTP and HTTPS versions
          return 200 OK and serve the same content:
            Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
---
 Documentation/admin-guide/README.rst                        | 4 ++--
 Documentation/admin-guide/dell_rbu.rst                      | 2 +-
 Documentation/admin-guide/devices.txt                       | 6 +++---
 Documentation/admin-guide/ext4.rst                          | 4 ++--
 Documentation/admin-guide/kernel-parameters.txt             | 2 +-
 Documentation/admin-guide/laptops/disk-shock-protection.rst | 2 +-
 Documentation/admin-guide/laptops/sonypi.rst                | 2 +-
 Documentation/admin-guide/laptops/thinkpad-acpi.rst         | 6 +++---
 Documentation/admin-guide/mm/ksm.rst                        | 2 +-
 Documentation/admin-guide/nfs/nfs-client.rst                | 4 ++--
 Documentation/admin-guide/nfs/nfs-rdma.rst                  | 2 +-
 Documentation/admin-guide/nfs/nfsroot.rst                   | 6 +++---
 Documentation/admin-guide/sysctl/fs.rst                     | 2 +-
 13 files changed, 22 insertions(+), 22 deletions(-)

diff --git a/Documentation/admin-guide/README.rst b/Documentation/admin-guide/README.rst
index 5fb526900023..d9e7f7117850 100644
--- a/Documentation/admin-guide/README.rst
+++ b/Documentation/admin-guide/README.rst
@@ -1,7 +1,7 @@
 .. _readme:
 
-Linux kernel release 5.x <http://kernel.org/>
-=============================================
+Linux kernel release 5.x <https://kernel.org/>
+==============================================
 
 These are the release notes for Linux version 5.  Read them carefully,
 as they tell you what this is all about, explain how to install the
diff --git a/Documentation/admin-guide/dell_rbu.rst b/Documentation/admin-guide/dell_rbu.rst
index 8d70e1fc9f9d..2196caf1b939 100644
--- a/Documentation/admin-guide/dell_rbu.rst
+++ b/Documentation/admin-guide/dell_rbu.rst
@@ -26,7 +26,7 @@ Please go to  http://support.dell.com register and you can find info on
 OpenManage and Dell Update packages (DUP).
 
 Libsmbios can also be used to update BIOS on Dell systems go to
-http://linux.dell.com/libsmbios/ for details.
+https://linux.dell.com/libsmbios/ for details.
 
 Dell_RBU driver supports BIOS update using the monolithic image and packetized
 image methods. In case of monolithic the driver allocates a contiguous chunk
diff --git a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt
index 2a97aaec8b12..a622dfec92a4 100644
--- a/Documentation/admin-guide/devices.txt
+++ b/Documentation/admin-guide/devices.txt
@@ -1442,7 +1442,7 @@
 		    ...
 
 		The driver and documentation may be obtained from
-		http://www.winradio.com/
+		https://www.winradio.com/
 
   82 block	I2O hard disk
 		  0 = /dev/i2o/hdag	33rd I2O hard disk, whole disk
@@ -1656,7 +1656,7 @@
 		dynamically, so there is no fixed mapping from subdevice
 		pathnames to minor numbers.
 
-		See http://www.comedi.org/ for information about the Comedi
+		See https://www.comedi.org/ for information about the Comedi
 		project.
 
   98 block	User-mode virtual block device
@@ -1723,7 +1723,7 @@
 		implementations a kernel presence for caching and easy
 		mounting.  For more information about the project,
 		write to <arla-drinkers@stacken.kth.se> or see
-		http://www.stacken.kth.se/project/arla/
+		https://www.stacken.kth.se/project/arla/
 
  103 block	Audit device
 		  0 = /dev/audit	Audit device
diff --git a/Documentation/admin-guide/ext4.rst b/Documentation/admin-guide/ext4.rst
index 9443fcef1876..bc3abfb33476 100644
--- a/Documentation/admin-guide/ext4.rst
+++ b/Documentation/admin-guide/ext4.rst
@@ -611,7 +611,7 @@ kernel source:	<file:fs/ext4/>
 
 programs:	http://e2fsprogs.sourceforge.net/
 
-useful links:	http://fedoraproject.org/wiki/ext3-devel
+useful links:	https://fedoraproject.org/wiki/ext3-devel
 		http://www.bullopensource.org/ext4/
 		http://ext4.wiki.kernel.org/index.php/Main_Page
-		http://fedoraproject.org/wiki/Features/Ext4
+		https://fedoraproject.org/wiki/Features/Ext4
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index fb95fad81c79..b333ba5cb144 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2786,7 +2786,7 @@
 			touchscreen support is not enabled in the mainstream
 			kernel as of 2.6.30, a preliminary port can be found
 			in the "bleeding edge" mini2440 support kernel at
-			http://repo.or.cz/w/linux-2.6/mini2440.git
+			https://repo.or.cz/w/linux-2.6/mini2440.git
 
 	mitigations=
 			[X86,PPC,S390,ARM64] Control optional mitigations for
diff --git a/Documentation/admin-guide/laptops/disk-shock-protection.rst b/Documentation/admin-guide/laptops/disk-shock-protection.rst
index e97c5f78d8c3..22c7ec3e84cf 100644
--- a/Documentation/admin-guide/laptops/disk-shock-protection.rst
+++ b/Documentation/admin-guide/laptops/disk-shock-protection.rst
@@ -135,7 +135,7 @@ single project which, although still considered experimental, is fit
 for use. Please feel free to add projects that have been the victims
 of my ignorance.
 
-- http://www.thinkwiki.org/wiki/HDAPS
+- https://www.thinkwiki.org/wiki/HDAPS
 
   See this page for information about Linux support of the hard disk
   active protection system as implemented in IBM/Lenovo Thinkpads.
diff --git a/Documentation/admin-guide/laptops/sonypi.rst b/Documentation/admin-guide/laptops/sonypi.rst
index c6eaaf48f7c1..190da1234314 100644
--- a/Documentation/admin-guide/laptops/sonypi.rst
+++ b/Documentation/admin-guide/laptops/sonypi.rst
@@ -151,7 +151,7 @@ Bugs:
 	  different way to adjust the backlighting of the screen. There
 	  is a userspace utility to adjust the brightness on those models,
 	  which can be downloaded from
-	  http://www.acc.umu.se/~erikw/program/smartdimmer-0.1.tar.bz2
+	  https://www.acc.umu.se/~erikw/program/smartdimmer-0.1.tar.bz2
 
 	- since all development was done by reverse engineering, there is
 	  *absolutely no guarantee* that this driver will not crash your
diff --git a/Documentation/admin-guide/laptops/thinkpad-acpi.rst b/Documentation/admin-guide/laptops/thinkpad-acpi.rst
index 822907dcc845..69b7ce905cba 100644
--- a/Documentation/admin-guide/laptops/thinkpad-acpi.rst
+++ b/Documentation/admin-guide/laptops/thinkpad-acpi.rst
@@ -904,7 +904,7 @@ temperatures:
 The mapping of thermal sensors to physical locations varies depending on
 system-board model (and thus, on ThinkPad model).
 
-http://thinkwiki.org/wiki/Thermal_Sensors is a public wiki page that
+https://thinkwiki.org/wiki/Thermal_Sensors is a public wiki page that
 tries to track down these locations for various models.
 
 Most (newer?) models seem to follow this pattern:
@@ -925,7 +925,7 @@ For the R51 (source: Thomas Gruber):
 - 3:  Internal HDD
 
 For the T43, T43/p (source: Shmidoax/Thinkwiki.org)
-http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_T43.2C_T43p
+https://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_T43.2C_T43p
 
 - 2:  System board, left side (near PCMCIA slot), reported as HDAPS temp
 - 3:  PCMCIA slot
@@ -935,7 +935,7 @@ http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_T43.2C_T43p
 - 11: Power regulator, underside of system board, below F2 key
 
 The A31 has a very atypical layout for the thermal sensors
-(source: Milos Popovic, http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_A31)
+(source: Milos Popovic, https://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_A31)
 
 - 1:  CPU
 - 2:  Main Battery: main sensor
diff --git a/Documentation/admin-guide/mm/ksm.rst b/Documentation/admin-guide/mm/ksm.rst
index 874eb0c77d34..e87bf0135edf 100644
--- a/Documentation/admin-guide/mm/ksm.rst
+++ b/Documentation/admin-guide/mm/ksm.rst
@@ -9,7 +9,7 @@ Overview
 
 KSM is a memory-saving de-duplication feature, enabled by CONFIG_KSM=y,
 added to the Linux kernel in 2.6.32.  See ``mm/ksm.c`` for its implementation,
-and http://lwn.net/Articles/306704/ and http://lwn.net/Articles/330589/
+and http://lwn.net/Articles/306704/ and https://lwn.net/Articles/330589/
 
 KSM was originally developed for use with KVM (where it was known as
 Kernel Shared Memory), to fit more virtual machines into physical memory,
diff --git a/Documentation/admin-guide/nfs/nfs-client.rst b/Documentation/admin-guide/nfs/nfs-client.rst
index c4b777c7584b..6adb6457bc69 100644
--- a/Documentation/admin-guide/nfs/nfs-client.rst
+++ b/Documentation/admin-guide/nfs/nfs-client.rst
@@ -65,8 +65,8 @@ migrated onto another server by means of the special "fs_locations"
 attribute. See `RFC3530 Section 6: Filesystem Migration and Replication`_ and
 `Implementation Guide for Referrals in NFSv4`_.
 
-.. _RFC3530 Section 6\: Filesystem Migration and Replication: http://tools.ietf.org/html/rfc3530#section-6
-.. _Implementation Guide for Referrals in NFSv4: http://tools.ietf.org/html/draft-ietf-nfsv4-referrals-00
+.. _RFC3530 Section 6\: Filesystem Migration and Replication: https://tools.ietf.org/html/rfc3530#section-6
+.. _Implementation Guide for Referrals in NFSv4: https://tools.ietf.org/html/draft-ietf-nfsv4-referrals-00
 
 The fs_locations information can take the form of either an ip address and
 a path, or a DNS hostname and a path. The latter requires the NFS client to
diff --git a/Documentation/admin-guide/nfs/nfs-rdma.rst b/Documentation/admin-guide/nfs/nfs-rdma.rst
index ef0f3678b1fb..f137485f8bde 100644
--- a/Documentation/admin-guide/nfs/nfs-rdma.rst
+++ b/Documentation/admin-guide/nfs/nfs-rdma.rst
@@ -65,7 +65,7 @@ use with NFS/RDMA.
   If the version is less than 1.1.2 or the command does not exist,
   you should install the latest version of nfs-utils.
 
-  Download the latest package from: http://www.kernel.org/pub/linux/utils/nfs
+  Download the latest package from: https://www.kernel.org/pub/linux/utils/nfs
 
   Uncompress the package and follow the installation instructions.
 
diff --git a/Documentation/admin-guide/nfs/nfsroot.rst b/Documentation/admin-guide/nfs/nfsroot.rst
index c6772075c80c..135218f33394 100644
--- a/Documentation/admin-guide/nfs/nfsroot.rst
+++ b/Documentation/admin-guide/nfs/nfsroot.rst
@@ -264,7 +264,7 @@ They depend on various facilities being available:
      	access to the floppy drive device, /dev/fd0
 
      	For more information on syslinux, including how to create bootdisks
-     	for prebuilt kernels, see http://syslinux.zytor.com/
+     	for prebuilt kernels, see https://syslinux.zytor.com/
 
 	.. note::
 		Previously it was possible to write a kernel directly to
@@ -292,7 +292,7 @@ They depend on various facilities being available:
 	  cdrecord dev=ATAPI:1,0,0 arch/x86/boot/image.iso
 
      	For more information on isolinux, including how to create bootdisks
-     	for prebuilt kernels, see http://syslinux.zytor.com/
+     	for prebuilt kernels, see https://syslinux.zytor.com/
 
 - Using LILO
 
@@ -346,7 +346,7 @@ They depend on various facilities being available:
 	see Documentation/admin-guide/serial-console.rst for more information.
 
 	For more information on isolinux, including how to create bootdisks
-	for prebuilt kernels, see http://syslinux.zytor.com/
+	for prebuilt kernels, see https://syslinux.zytor.com/
 
 
 
diff --git a/Documentation/admin-guide/sysctl/fs.rst b/Documentation/admin-guide/sysctl/fs.rst
index 2a45119e3331..f48277a0a850 100644
--- a/Documentation/admin-guide/sysctl/fs.rst
+++ b/Documentation/admin-guide/sysctl/fs.rst
@@ -261,7 +261,7 @@ directories like /tmp. The common method of exploitation of this flaw
 is to cross privilege boundaries when following a given symlink (i.e. a
 root process follows a symlink belonging to another user). For a likely
 incomplete list of hundreds of examples across the years, please see:
-http://cve.mitre.org/cgi-bin/cvekey.cgi?keyword=/tmp
+https://cve.mitre.org/cgi-bin/cvekey.cgi?keyword=/tmp
 
 When set to "0", symlink following behavior is unrestricted.
 
-- 
2.27.0


^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2020-06-26 19:18 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-21 13:20 [PATCH] Replace HTTP links with HTTPS ones: Documentation/admin-guide Alexander A. Klimov
2020-06-21 22:04 ` Pavel Machek
2020-06-22 13:14   ` Jonathan Corbet
2020-06-22 18:17   ` Alexander A. Klimov
2020-06-26 17:02 ` Jonathan Corbet
2020-06-26 19:18   ` Alexander A. Klimov
2020-06-22 18:19 Alexander A. Klimov
2020-06-22 18:38 ` Jonathan Neuschäfer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).