Re: [PATCH v6 1/2] dt-binding: Add DSI/LVDS TC358775 bridge bindings

[Sam Ravnborg <sam@ravnborg.org>]

Hi Vinay.

On Thu, Jul 02, 2020 at 06:06:33PM +0530, Vinay Simha BN wrote:
> Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
> 
> ---
> v1:
>  Initial version wast .txt file
> 
> v2:
>  From txt to yaml file format
> 
> v3:
> * Andrzej Hajda review comments incorporated
>   dual port lvds implemented
> 
> * Laurent Pinchart review comments incorporated
>   dsi lanes property removed and it is dynamically
>   picked from the dsi ports
>   VESA/JEIDA format picked from panel-lvds dts
> 
> v4:
> * Sam Ravnborg review comments incorporated
>   }' is indented properly in examples data-lanes
>   description for single-link and dual-link lvds

If you add a proper changelog then this patch is:
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>

	Sam
> ---
>  .../display/bridge/toshiba,tc358775.yaml      | 215 ++++++++++++++++++
>  1 file changed, 215 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
> new file mode 100644
> index 000000000000..9ddd63bee403
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
> @@ -0,0 +1,215 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358775.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Toshiba TC358775 DSI to LVDS bridge bindings
> +
> +maintainers:
> + - Vinay Simha BN <simhavcs@gmail.com>
> +
> +description: |
> + This binding supports DSI to LVDS bridge TC358775
> +
> + MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane.
> + Video frame size:
> + Up to 1600x1200 24-bit/pixel resolution for single-link LVDS display panel
> + limited by 135 MHz LVDS speed
> + Up to WUXGA (1920x1200 24-bit pixels) resolution for dual-link LVDS display
> + panel, limited by 270 MHz LVDS speed.
> +
> +properties:
> +  compatible:
> +    const: toshiba,tc358775
> +
> +  reg:
> +    maxItems: 1
> +    description: i2c address of the bridge, 0x0f
> +
> +  vdd-supply:
> +    maxItems: 1
> +    description:  1.2V LVDS Power Supply
> +
> +  vddio-supply:
> +    maxItems: 1
> +    description: 1.8V IO Power Supply
> +
> +  stby-gpios:
> +    maxItems: 1
> +    description: Standby pin, Low active
> +
> +  reset-gpios:
> +    maxItems: 1
> +    description: Hardware reset, Low active
> +
> +  ports:
> +    type: object
> +    description:
> +      A node containing input and output port nodes with endpoint definitions
> +      as documented in
> +      Documentation/devicetree/bindings/media/video-interfaces.txt
> +    properties:
> +      "#address-cells":
> +        const: 1
> +
> +      "#size-cells":
> +        const: 0
> +
> +      port@0:
> +        type: object
> +        description: |
> +          DSI Input. The remote endpoint phandle should be a
> +          reference to a valid mipi_dsi_host device node.
> +
> +      port@1:
> +        type: object
> +        description: |
> +          Video port for LVDS output (panel or connector).
> +
> +      port@2:
> +        type: object
> +        description: |
> +          Video port for Dual link LVDS output (panel or connector).
> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +required:
> + - compatible
> + - reg
> + - vdd-supply
> + - vddio-supply
> + - stby-gpios
> + - reset-gpios
> + - ports
> +
> +examples:
> + - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    /* For single-link LVDS display panel */
> +
> +    i2c@78b8000 {
> +        /* On High speed expansion */
> +        label = "HS-I2C2";
> +        reg = <0x078b8000 0x500>;
> +        clock-frequency = <400000>; /* fastmode operation */
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        tc_bridge: bridge@f {
> +            compatible = "toshiba,tc358775";
> +            reg = <0x0f>;
> +
> +            vdd-supply = <&pm8916_l2>;
> +            vddio-supply = <&pm8916_l6>;
> +
> +            stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
> +            reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port@0 {
> +                    reg = <0>;
> +                    d2l_in_test: endpoint {
> +                        remote-endpoint = <&dsi0_out>;
> +                    };
> +                };
> +
> +                port@1 {
> +                    reg = <1>;
> +                    lvds_out: endpoint {
> +                        remote-endpoint = <&panel_in>;
> +                    };
> +                };
> +            };
> +        };
> +    };
> +
> +    dsi@1a98000 {
> +        reg = <0x1a98000 0x25c>;
> +        reg-names = "dsi_ctrl";
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            port@1 {
> +                reg = <1>;
> +                dsi0_out: endpoint {
> +                    remote-endpoint = <&d2l_in_test>;
> +                    data-lanes = <0 1 2 3>;
> +                };
> +             };
> +         };
> +     };
> +
> + - |
> +    /* For dual-link LVDS display panel */
> +
> +    i2c@78b8000 {
> +        /* On High speed expansion */
> +        label = "HS-I2C2";
> +        reg = <0x078b8000 0x500>;
> +        clock-frequency = <400000>; /* fastmode operation */
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        tc_bridge_dual: bridge@f {
> +            compatible = "toshiba,tc358775";
> +            reg = <0x0f>;
> +
> +            vdd-supply = <&pm8916_l2>;
> +            vddio-supply = <&pm8916_l6>;
> +
> +            stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
> +            reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port@0 {
> +                    reg = <0>;
> +                    d2l_in_dual: endpoint {
> +                        remote-endpoint = <&dsi0_out_dual>;
> +                    };
> +                };
> +
> +                port@1 {
> +                    reg = <1>;
> +                    lvds0_out: endpoint {
> +                        remote-endpoint = <&panel_in0>;
> +                    };
> +                };
> +
> +                port@2 {
> +                    reg = <2>;
> +                    lvds1_out: endpoint {
> +                        remote-endpoint = <&panel_in1>;
> +                    };
> +                };
> +            };
> +        };
> +    };
> +
> +    dsi@1a98000 {
> +        reg = <0x1a98000 0x25c>;
> +        reg-names = "dsi_ctrl";
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            port@1 {
> +                reg = <1>;
> +                dsi0_out_dual: endpoint {
> +                    remote-endpoint = <&d2l_in_dual>;
> +                    data-lanes = <0 1 2 3>;
> +                };
> +             };
> +         };
> +     };
> +...
> -- 
> 2.17.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel