From: "Clément Péron" <peron.clem@gmail.com>
To: Rob Herring <robh@kernel.org>,
Tomeu Vizoso <tomeu.vizoso@collabora.com>,
Steven Price <steven.price@arm.com>,
Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>,
Viresh Kumar <vireshk@kernel.org>, Nishanth Menon <nm@ti.com>,
Stephen Boyd <sboyd@kernel.org>,
Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>
Cc: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
"Clément Péron" <peron.clem@gmail.com>
Subject: [PATCH v2 13/14] [DO NOT MERGE] arm64: dts: allwinner: h6: Add GPU OPP table
Date: Sat, 4 Jul 2020 12:25:34 +0200 [thread overview]
Message-ID: <20200704102535.189647-14-peron.clem@gmail.com> (raw)
In-Reply-To: <20200704102535.189647-1-peron.clem@gmail.com>
Add an Operating Performance Points table for the GPU to
enable Dynamic Voltage & Frequency Scaling on the H6.
The voltage range is set with minival voltage set to the target
and the maximal voltage set to 1.2V. This allow DVFS framework to
work properly on board with fixed regulator.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 80 ++++++++++++++++++++
1 file changed, 80 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 8f514a2169aa..a69f9e09a829 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -174,6 +174,7 @@ gpu: gpu@1800000 {
clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;
clock-names = "core", "bus";
resets = <&ccu RST_BUS_GPU>;
+ operating-points-v2 = <&gpu_opp_table>;
#cooling-cells = <2>;
status = "disabled";
};
@@ -1036,4 +1037,83 @@ map0 {
};
};
};
+
+ gpu_opp_table: gpu-opp-table {
+ compatible = "operating-points-v2";
+
+ opp@216000000 {
+ opp-hz = /bits/ 64 <216000000>;
+ opp-microvolt = <810000 810000 1200000>;
+ };
+
+ opp@264000000 {
+ opp-hz = /bits/ 64 <264000000>;
+ opp-microvolt = <810000 810000 1200000>;
+ };
+
+ opp@312000000 {
+ opp-hz = /bits/ 64 <312000000>;
+ opp-microvolt = <810000 810000 1200000>;
+ };
+
+ opp@336000000 {
+ opp-hz = /bits/ 64 <336000000>;
+ opp-microvolt = <810000 810000 1200000>;
+ };
+
+ opp@360000000 {
+ opp-hz = /bits/ 64 <360000000>;
+ opp-microvolt = <820000 820000 1200000>;
+ };
+
+ opp@384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ opp-microvolt = <830000 830000 1200000>;
+ };
+
+ opp@408000000 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <840000 840000 1200000>;
+ };
+
+ opp@420000000 {
+ opp-hz = /bits/ 64 <420000000>;
+ opp-microvolt = <850000 850000 1200000>;
+ };
+
+ opp@432000000 {
+ opp-hz = /bits/ 64 <432000000>;
+ opp-microvolt = <860000 860000 1200000>;
+ };
+
+ opp@456000000 {
+ opp-hz = /bits/ 64 <456000000>;
+ opp-microvolt = <870000 870000 1200000>;
+ };
+
+ opp@504000000 {
+ opp-hz = /bits/ 64 <504000000>;
+ opp-microvolt = <890000 890000 1200000>;
+ };
+
+ opp@540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ opp-microvolt = <910000 910000 1200000>;
+ };
+
+ opp@576000000 {
+ opp-hz = /bits/ 64 <576000000>;
+ opp-microvolt = <930000 930000 1200000>;
+ };
+
+ opp@624000000 {
+ opp-hz = /bits/ 64 <624000000>;
+ opp-microvolt = <950000 950000 1200000>;
+ };
+
+ opp@756000000 {
+ opp-hz = /bits/ 64 <756000000>;
+ opp-microvolt = <1040000 1040000 1200000>;
+ };
+ };
};
--
2.25.1
next prev parent reply other threads:[~2020-07-04 10:26 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-04 10:25 [PATCH v2 00/14] Add regulator devfreq support to Panfrost Clément Péron
2020-07-04 10:25 ` [PATCH v2 01/14] drm/panfrost: avoid static declaration Clément Péron
2020-07-04 10:25 ` [PATCH v2 02/14] drm/panfrost: clean headers in devfreq Clément Péron
2020-07-04 10:25 ` [PATCH v2 03/14] drm/panfrost: don't use pfdevfreq.busy_count to know if hw is idle Clément Péron
2020-07-04 10:25 ` [PATCH v2 04/14] drm/panfrost: introduce panfrost_devfreq struct Clément Péron
2020-07-04 10:25 ` [PATCH v2 05/14] drm/panfrost: use spinlock instead of atomic Clément Péron
2020-07-04 10:25 ` [PATCH v2 06/14] drm/panfrost: properly handle error in probe Clément Péron
2020-07-04 10:25 ` [PATCH v2 07/14] drm/panfrost: rename error labels in device_init Clément Péron
2020-07-04 10:25 ` [PATCH v2 08/14] drm/panfrost: move devfreq_init()/fini() in device Clément Péron
2020-07-04 10:25 ` [PATCH v2 09/14] drm/panfrost: dynamically alloc regulators Clément Péron
2020-07-04 10:25 ` [PATCH v2 10/14] drm/panfrost: add regulators to devfreq Clément Péron
2020-07-04 10:25 ` [PATCH v2 11/14] arm64: defconfig: Enable devfreq cooling device Clément Péron
2020-07-04 10:25 ` [PATCH v2 12/14] arm64: dts: allwinner: h6: Add cooling map for GPU Clément Péron
2020-07-04 10:25 ` Clément Péron [this message]
2020-07-04 12:13 ` [PATCH v2 13/14] [DO NOT MERGE] arm64: dts: allwinner: h6: Add GPU OPP table Maxime Ripard
2020-07-04 14:56 ` Clément Péron
2020-08-03 7:54 ` Clément Péron
2020-08-24 13:11 ` Maxime Ripard
2020-08-28 12:16 ` Clément Péron
2020-08-28 12:21 ` Ondřej Jirman
2020-08-28 13:01 ` [linux-sunxi] " Jernej Škrabec
2020-07-04 10:25 ` [PATCH v2 14/14] [DO NOT MERGE] arm64: dts: allwinner: force GPU regulator to be always Clément Péron
2020-07-04 10:30 ` Clément Péron
2020-07-04 10:28 ` [PATCH v2 00/14] Add regulator devfreq support to Panfrost Clément Péron
2020-07-06 13:26 ` Alyssa Rosenzweig
2020-07-07 0:16 ` Ondřej Jirman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200704102535.189647-14-peron.clem@gmail.com \
--to=peron.clem@gmail.com \
--cc=alyssa.rosenzweig@collabora.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mripard@kernel.org \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=steven.price@arm.com \
--cc=tomeu.vizoso@collabora.com \
--cc=vireshk@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).