LKML Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] Replace HTTP links with HTTPS ones: Documentation/devicetree/bindings/iio
@ 2020-07-03 18:57 Alexander A. Klimov
  2020-07-04 16:34 ` Jonathan Cameron
  0 siblings, 1 reply; 5+ messages in thread
From: Alexander A. Klimov @ 2020-07-03 18:57 UTC (permalink / raw)
  To: michael.hennerich, jic23, knaack.h, lars, pmeerw, robh+dt,
	ribalda, tomislav.denis, broonie, alexandru.ardelean, sboyd, ak,
	linux-iio, devicetree, linux-kernel
  Cc: Alexander A. Klimov

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
          If both the HTTP and HTTPS versions
          return 200 OK and serve the same content:
            Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
---
 Continuing my work started at 93431e0607e5.

 If there are any URLs to be removed completely or at least not HTTPSified:
 Just clearly say so and I'll *undo my change*.
 See also https://lkml.org/lkml/2020/6/27/64

 If there are any valid, but yet not changed URLs:
 See https://lkml.org/lkml/2020/6/26/837

 Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml  | 4 ++--
 Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt      | 2 +-
 Documentation/devicetree/bindings/iio/iio-bindings.txt        | 2 +-
 Documentation/devicetree/bindings/iio/light/apds9300.txt      | 2 +-
 Documentation/devicetree/bindings/iio/light/apds9960.txt      | 2 +-
 Documentation/devicetree/bindings/iio/light/opt3001.txt       | 2 +-
 Documentation/devicetree/bindings/iio/light/vl6180.txt        | 2 +-
 .../devicetree/bindings/iio/potentiometer/mcp41010.txt        | 2 +-
 .../devicetree/bindings/iio/potentiostat/lmp91000.txt         | 4 ++--
 .../devicetree/bindings/iio/pressure/asc,dlhl60d.yaml         | 2 +-
 .../devicetree/bindings/iio/proximity/devantech-srf04.yaml    | 4 ++--
 Documentation/devicetree/bindings/iio/temperature/tmp007.txt  | 2 +-
 12 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
index d124eba1ce54..fd4eaa3d0ab4 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
@@ -12,8 +12,8 @@ maintainers:
 description: |
   Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers that supports
   both I2C & SPI interfaces.
-    http://www.analog.com/en/products/mems/accelerometers/adxl345.html
-    http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
+    https://www.analog.com/en/products/mems/accelerometers/adxl345.html
+    https://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
index 639c94ed83e9..17af395b99d9 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
@@ -6,7 +6,7 @@ Is is programmable through an SPI interface.
 
 The internal DACs are loaded when the LOADDACS pin is pulled down.
 
-http://www.ti.com/lit/ds/sbas106/sbas106.pdf
+https://www.ti.com/lit/ds/sbas106/sbas106.pdf
 
 Required Properties:
 - compatible: Should be one of:
diff --git a/Documentation/devicetree/bindings/iio/iio-bindings.txt b/Documentation/devicetree/bindings/iio/iio-bindings.txt
index af33267727f4..aa63cac7323e 100644
--- a/Documentation/devicetree/bindings/iio/iio-bindings.txt
+++ b/Documentation/devicetree/bindings/iio/iio-bindings.txt
@@ -9,7 +9,7 @@ specifier is an array of one or more cells identifying the IIO
 output on a device. The length of an IIO specifier is defined by the
 value of a #io-channel-cells property in the IIO provider node.
 
-[1] http://marc.info/?l=linux-iio&m=135902119507483&w=2
+[1] https://marc.info/?l=linux-iio&m=135902119507483&w=2
 
 ==IIO providers==
 
diff --git a/Documentation/devicetree/bindings/iio/light/apds9300.txt b/Documentation/devicetree/bindings/iio/light/apds9300.txt
index aa199e09a493..3aa6db3ee99d 100644
--- a/Documentation/devicetree/bindings/iio/light/apds9300.txt
+++ b/Documentation/devicetree/bindings/iio/light/apds9300.txt
@@ -1,6 +1,6 @@
 * Avago APDS9300 ambient light sensor
 
-http://www.avagotech.com/docs/AV02-1077EN
+https://www.avagotech.com/docs/AV02-1077EN
 
 Required properties:
 
diff --git a/Documentation/devicetree/bindings/iio/light/apds9960.txt b/Documentation/devicetree/bindings/iio/light/apds9960.txt
index 3af325ad194b..c53ddb81c4aa 100644
--- a/Documentation/devicetree/bindings/iio/light/apds9960.txt
+++ b/Documentation/devicetree/bindings/iio/light/apds9960.txt
@@ -1,6 +1,6 @@
 * Avago APDS9960 gesture/RGB/ALS/proximity sensor
 
-http://www.avagotech.com/docs/AV02-4191EN
+https://www.avagotech.com/docs/AV02-4191EN
 
 Required properties:
 
diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt
index 47b13eb8f4ec..9e6f2998e751 100644
--- a/Documentation/devicetree/bindings/iio/light/opt3001.txt
+++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt
@@ -6,7 +6,7 @@ the optional generation of IIO events on rising/falling light threshold changes
 requires the use of interrupts. Without interrupts, only the simple reading
 of the current light value is supported through the IIO API.
 
-http://www.ti.com/product/opt3001
+https://www.ti.com/product/opt3001
 
 Required properties:
   - compatible: should be "ti,opt3001"
diff --git a/Documentation/devicetree/bindings/iio/light/vl6180.txt b/Documentation/devicetree/bindings/iio/light/vl6180.txt
index 2c52952715a0..fb9137d85df9 100644
--- a/Documentation/devicetree/bindings/iio/light/vl6180.txt
+++ b/Documentation/devicetree/bindings/iio/light/vl6180.txt
@@ -1,6 +1,6 @@
 STMicro VL6180 -  ALS, range and proximity sensor
 
-Link to datasheet: http://www.st.com/resource/en/datasheet/vl6180x.pdf
+Link to datasheet: https://www.st.com/resource/en/datasheet/vl6180x.pdf
 
 Required properties:
 
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
index 566711b9950c..4f245e8469fd 100644
--- a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
+++ b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
@@ -1,7 +1,7 @@
 * Microchip MCP41010/41050/41100/42010/42050/42100 Digital Potentiometer
 
 Datasheet publicly available at:
-http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
+https://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
 
 The node for this driver must be a child node of a SPI controller, hence
 all mandatory properties described in
diff --git a/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt b/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
index e6d0c2eb345c..f3ab02b0dd41 100644
--- a/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
+++ b/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
@@ -1,7 +1,7 @@
 * Texas Instruments LMP91000 series of potentiostats
 
-LMP91000: http://www.ti.com/lit/ds/symlink/lmp91000.pdf
-LMP91002: http://www.ti.com/lit/ds/symlink/lmp91002.pdf
+LMP91000: https://www.ti.com/lit/ds/symlink/lmp91000.pdf
+LMP91002: https://www.ti.com/lit/ds/symlink/lmp91002.pdf
 
 Required properties:
 
diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
index 64c18f1693f0..be2be4b556db 100644
--- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
@@ -13,7 +13,7 @@ description: |
   Bindings for the All Sensors DLH series pressure sensors.
 
   Specifications about the sensors can be found at:
-    http://www.allsensors.com/cad/DS-0355_Rev_B.PDF
+    https://www.allsensors.com/cad/DS-0355_Rev_B.PDF
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
index f86f8b23ef18..ce795279839e 100644
--- a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
@@ -17,9 +17,9 @@ description: |
     until it is received once again
 
   Specifications about the devices can be found at:
-  http://www.robot-electronics.co.uk/htm/srf04tech.htm
+  https://www.robot-electronics.co.uk/htm/srf04tech.htm
 
-  http://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
+  https://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/iio/temperature/tmp007.txt b/Documentation/devicetree/bindings/iio/temperature/tmp007.txt
index da0af234a357..21952c140599 100644
--- a/Documentation/devicetree/bindings/iio/temperature/tmp007.txt
+++ b/Documentation/devicetree/bindings/iio/temperature/tmp007.txt
@@ -1,6 +1,6 @@
 * TI TMP007 - IR thermopile sensor with integrated math engine
 
-Link to datasheet: http://www.ti.com/lit/ds/symlink/tmp007.pdf
+Link to datasheet: https://www.ti.com/lit/ds/symlink/tmp007.pdf
 
 Required properties:
 
-- 
2.27.0


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH] Replace HTTP links with HTTPS ones: Documentation/devicetree/bindings/iio
  2020-07-03 18:57 [PATCH] Replace HTTP links with HTTPS ones: Documentation/devicetree/bindings/iio Alexander A. Klimov
@ 2020-07-04 16:34 ` Jonathan Cameron
  2020-07-04 19:33   ` [PATCH v2] " Alexander A. Klimov
  0 siblings, 1 reply; 5+ messages in thread
From: Jonathan Cameron @ 2020-07-04 16:34 UTC (permalink / raw)
  To: Alexander A. Klimov
  Cc: michael.hennerich, knaack.h, lars, pmeerw, robh+dt, ribalda,
	tomislav.denis, broonie, alexandru.ardelean, sboyd, ak,
	linux-iio, devicetree, linux-kernel

On Fri,  3 Jul 2020 20:57:25 +0200
"Alexander A. Klimov" <grandmaster@al2klimov.de> wrote:

> Rationale:
> Reduces attack surface on kernel devs opening the links for MITM
> as HTTPS traffic is much harder to manipulate.
> 
> Deterministic algorithm:
> For each file:
>   If not .svg:
>     For each line:
>       If doesn't contain `\bxmlns\b`:
>         For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
>           If both the HTTP and HTTPS versions
>           return 200 OK and serve the same content:
>             Replace HTTP with HTTPS.
> 
> Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
> ---
>  Continuing my work started at 93431e0607e5.
> 
>  If there are any URLs to be removed completely or at least not HTTPSified:
>  Just clearly say so and I'll *undo my change*.
>  See also https://lkml.org/lkml/2020/6/27/64
> 
>  If there are any valid, but yet not changed URLs:
>  See https://lkml.org/lkml/2020/6/26/837
> 
>  Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml  | 4 ++--
>  Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt      | 2 +-
>  Documentation/devicetree/bindings/iio/iio-bindings.txt        | 2 +-
>  Documentation/devicetree/bindings/iio/light/apds9300.txt      | 2 +-
>  Documentation/devicetree/bindings/iio/light/apds9960.txt      | 2 +-
>  Documentation/devicetree/bindings/iio/light/opt3001.txt       | 2 +-
>  Documentation/devicetree/bindings/iio/light/vl6180.txt        | 2 +-
>  .../devicetree/bindings/iio/potentiometer/mcp41010.txt        | 2 +-
>  .../devicetree/bindings/iio/potentiostat/lmp91000.txt         | 4 ++--
>  .../devicetree/bindings/iio/pressure/asc,dlhl60d.yaml         | 2 +-
>  .../devicetree/bindings/iio/proximity/devantech-srf04.yaml    | 4 ++--
>  Documentation/devicetree/bindings/iio/temperature/tmp007.txt  | 2 +-
>  12 files changed, 15 insertions(+), 15 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> index d124eba1ce54..fd4eaa3d0ab4 100644
> --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> @@ -12,8 +12,8 @@ maintainers:
>  description: |
>    Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers that supports
>    both I2C & SPI interfaces.
> -    http://www.analog.com/en/products/mems/accelerometers/adxl345.html
> -    http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
> +    https://www.analog.com/en/products/mems/accelerometers/adxl345.html
> +    https://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
>  
>  properties:
>    compatible:
> diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> index 639c94ed83e9..17af395b99d9 100644
> --- a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> @@ -6,7 +6,7 @@ Is is programmable through an SPI interface.
>  
>  The internal DACs are loaded when the LOADDACS pin is pulled down.
>  
> -http://www.ti.com/lit/ds/sbas106/sbas106.pdf
> +https://www.ti.com/lit/ds/sbas106/sbas106.pdf
>  
>  Required Properties:
>  - compatible: Should be one of:
> diff --git a/Documentation/devicetree/bindings/iio/iio-bindings.txt b/Documentation/devicetree/bindings/iio/iio-bindings.txt
> index af33267727f4..aa63cac7323e 100644
> --- a/Documentation/devicetree/bindings/iio/iio-bindings.txt
> +++ b/Documentation/devicetree/bindings/iio/iio-bindings.txt
> @@ -9,7 +9,7 @@ specifier is an array of one or more cells identifying the IIO
>  output on a device. The length of an IIO specifier is defined by the
>  value of a #io-channel-cells property in the IIO provider node.
>  
> -[1] http://marc.info/?l=linux-iio&m=135902119507483&w=2
> +[1] https://marc.info/?l=linux-iio&m=135902119507483&w=2
>  
>  ==IIO providers==
>  
> diff --git a/Documentation/devicetree/bindings/iio/light/apds9300.txt b/Documentation/devicetree/bindings/iio/light/apds9300.txt
> index aa199e09a493..3aa6db3ee99d 100644
> --- a/Documentation/devicetree/bindings/iio/light/apds9300.txt
> +++ b/Documentation/devicetree/bindings/iio/light/apds9300.txt
> @@ -1,6 +1,6 @@
>  * Avago APDS9300 ambient light sensor
>  
> -http://www.avagotech.com/docs/AV02-1077EN
> +https://www.avagotech.com/docs/AV02-1077EN
>  
>  Required properties:
>  
> diff --git a/Documentation/devicetree/bindings/iio/light/apds9960.txt b/Documentation/devicetree/bindings/iio/light/apds9960.txt
> index 3af325ad194b..c53ddb81c4aa 100644
> --- a/Documentation/devicetree/bindings/iio/light/apds9960.txt
> +++ b/Documentation/devicetree/bindings/iio/light/apds9960.txt
> @@ -1,6 +1,6 @@
>  * Avago APDS9960 gesture/RGB/ALS/proximity sensor
>  
> -http://www.avagotech.com/docs/AV02-4191EN
> +https://www.avagotech.com/docs/AV02-4191EN
>  
>  Required properties:
>  
> diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt
> index 47b13eb8f4ec..9e6f2998e751 100644
> --- a/Documentation/devicetree/bindings/iio/light/opt3001.txt
> +++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt
> @@ -6,7 +6,7 @@ the optional generation of IIO events on rising/falling light threshold changes
>  requires the use of interrupts. Without interrupts, only the simple reading
>  of the current light value is supported through the IIO API.
>  
> -http://www.ti.com/product/opt3001
> +https://www.ti.com/product/opt3001
>  
>  Required properties:
>    - compatible: should be "ti,opt3001"
> diff --git a/Documentation/devicetree/bindings/iio/light/vl6180.txt b/Documentation/devicetree/bindings/iio/light/vl6180.txt
> index 2c52952715a0..fb9137d85df9 100644
> --- a/Documentation/devicetree/bindings/iio/light/vl6180.txt
> +++ b/Documentation/devicetree/bindings/iio/light/vl6180.txt
> @@ -1,6 +1,6 @@
>  STMicro VL6180 -  ALS, range and proximity sensor
>  
> -Link to datasheet: http://www.st.com/resource/en/datasheet/vl6180x.pdf
> +Link to datasheet: https://www.st.com/resource/en/datasheet/vl6180x.pdf
>  
>  Required properties:
>  
> diff --git a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> index 566711b9950c..4f245e8469fd 100644
> --- a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> +++ b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> @@ -1,7 +1,7 @@
>  * Microchip MCP41010/41050/41100/42010/42050/42100 Digital Potentiometer
>  
>  Datasheet publicly available at:
> -http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
> +https://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
>  
>  The node for this driver must be a child node of a SPI controller, hence
>  all mandatory properties described in
> diff --git a/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt b/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
> index e6d0c2eb345c..f3ab02b0dd41 100644
> --- a/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
> +++ b/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
> @@ -1,7 +1,7 @@
>  * Texas Instruments LMP91000 series of potentiostats
>  
> -LMP91000: http://www.ti.com/lit/ds/symlink/lmp91000.pdf
> -LMP91002: http://www.ti.com/lit/ds/symlink/lmp91002.pdf
> +LMP91000: https://www.ti.com/lit/ds/symlink/lmp91000.pdf
> +LMP91002: https://www.ti.com/lit/ds/symlink/lmp91002.pdf
>  
>  Required properties:
>  
> diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> index 64c18f1693f0..be2be4b556db 100644
> --- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> +++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> @@ -13,7 +13,7 @@ description: |
>    Bindings for the All Sensors DLH series pressure sensors.
>  
>    Specifications about the sensors can be found at:
> -    http://www.allsensors.com/cad/DS-0355_Rev_B.PDF
> +    https://www.allsensors.com/cad/DS-0355_Rev_B.PDF
>  
>  properties:
>    compatible:
> diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> index f86f8b23ef18..ce795279839e 100644
> --- a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> +++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> @@ -17,9 +17,9 @@ description: |
>      until it is received once again
>  
>    Specifications about the devices can be found at:
> -  http://www.robot-electronics.co.uk/htm/srf04tech.htm
> +  https://www.robot-electronics.co.uk/htm/srf04tech.htm
>  
> -  http://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
> +  https://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
>  
>  properties:
>    compatible:
> diff --git a/Documentation/devicetree/bindings/iio/temperature/tmp007.txt b/Documentation/devicetree/bindings/iio/temperature/tmp007.txt
> index da0af234a357..21952c140599 100644
> --- a/Documentation/devicetree/bindings/iio/temperature/tmp007.txt
> +++ b/Documentation/devicetree/bindings/iio/temperature/tmp007.txt
> @@ -1,6 +1,6 @@
>  * TI TMP007 - IR thermopile sensor with integrated math engine
>  
> -Link to datasheet: http://www.ti.com/lit/ds/symlink/tmp007.pdf
> +Link to datasheet: https://www.ti.com/lit/ds/symlink/tmp007.pdf

This one doesn't actually take us anywhere very useful. So probably best
to just drop it.  The datasheet has been removed from TI's website it
seems.


>  
>  Required properties:
>  


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v2] Replace HTTP links with HTTPS ones: Documentation/devicetree/bindings/iio
  2020-07-04 16:34 ` Jonathan Cameron
@ 2020-07-04 19:33   ` Alexander A. Klimov
  2020-07-04 23:05     ` Matt Ranostay
  0 siblings, 1 reply; 5+ messages in thread
From: Alexander A. Klimov @ 2020-07-04 19:33 UTC (permalink / raw)
  To: michael.hennerich, jic23, knaack.h, lars, pmeerw, robh+dt,
	ribalda, tomislav.denis, grandmaster, sboyd, ak, lee.jones,
	linux-iio, devicetree, linux-kernel

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
          If both the HTTP and HTTPS versions
          return 200 OK and serve the same content:
            Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
---
 Changes in v2:
 Addressed https://lore.kernel.org/linux-iio/20200704173459.78ceec60@archlinux/

 Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml  | 4 ++--
 Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt      | 2 +-
 Documentation/devicetree/bindings/iio/iio-bindings.txt        | 2 +-
 Documentation/devicetree/bindings/iio/light/apds9300.txt      | 2 +-
 Documentation/devicetree/bindings/iio/light/apds9960.txt      | 2 +-
 Documentation/devicetree/bindings/iio/light/opt3001.txt       | 2 +-
 Documentation/devicetree/bindings/iio/light/vl6180.txt        | 2 +-
 .../devicetree/bindings/iio/potentiometer/mcp41010.txt        | 2 +-
 .../devicetree/bindings/iio/potentiostat/lmp91000.txt         | 4 ++--
 .../devicetree/bindings/iio/pressure/asc,dlhl60d.yaml         | 2 +-
 .../devicetree/bindings/iio/proximity/devantech-srf04.yaml    | 4 ++--
 11 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
index d124eba1ce54..fd4eaa3d0ab4 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
@@ -12,8 +12,8 @@ maintainers:
 description: |
   Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers that supports
   both I2C & SPI interfaces.
-    http://www.analog.com/en/products/mems/accelerometers/adxl345.html
-    http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
+    https://www.analog.com/en/products/mems/accelerometers/adxl345.html
+    https://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
index 639c94ed83e9..17af395b99d9 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
@@ -6,7 +6,7 @@ Is is programmable through an SPI interface.
 
 The internal DACs are loaded when the LOADDACS pin is pulled down.
 
-http://www.ti.com/lit/ds/sbas106/sbas106.pdf
+https://www.ti.com/lit/ds/sbas106/sbas106.pdf
 
 Required Properties:
 - compatible: Should be one of:
diff --git a/Documentation/devicetree/bindings/iio/iio-bindings.txt b/Documentation/devicetree/bindings/iio/iio-bindings.txt
index af33267727f4..aa63cac7323e 100644
--- a/Documentation/devicetree/bindings/iio/iio-bindings.txt
+++ b/Documentation/devicetree/bindings/iio/iio-bindings.txt
@@ -9,7 +9,7 @@ specifier is an array of one or more cells identifying the IIO
 output on a device. The length of an IIO specifier is defined by the
 value of a #io-channel-cells property in the IIO provider node.
 
-[1] http://marc.info/?l=linux-iio&m=135902119507483&w=2
+[1] https://marc.info/?l=linux-iio&m=135902119507483&w=2
 
 ==IIO providers==
 
diff --git a/Documentation/devicetree/bindings/iio/light/apds9300.txt b/Documentation/devicetree/bindings/iio/light/apds9300.txt
index aa199e09a493..3aa6db3ee99d 100644
--- a/Documentation/devicetree/bindings/iio/light/apds9300.txt
+++ b/Documentation/devicetree/bindings/iio/light/apds9300.txt
@@ -1,6 +1,6 @@
 * Avago APDS9300 ambient light sensor
 
-http://www.avagotech.com/docs/AV02-1077EN
+https://www.avagotech.com/docs/AV02-1077EN
 
 Required properties:
 
diff --git a/Documentation/devicetree/bindings/iio/light/apds9960.txt b/Documentation/devicetree/bindings/iio/light/apds9960.txt
index 3af325ad194b..c53ddb81c4aa 100644
--- a/Documentation/devicetree/bindings/iio/light/apds9960.txt
+++ b/Documentation/devicetree/bindings/iio/light/apds9960.txt
@@ -1,6 +1,6 @@
 * Avago APDS9960 gesture/RGB/ALS/proximity sensor
 
-http://www.avagotech.com/docs/AV02-4191EN
+https://www.avagotech.com/docs/AV02-4191EN
 
 Required properties:
 
diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt
index 47b13eb8f4ec..9e6f2998e751 100644
--- a/Documentation/devicetree/bindings/iio/light/opt3001.txt
+++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt
@@ -6,7 +6,7 @@ the optional generation of IIO events on rising/falling light threshold changes
 requires the use of interrupts. Without interrupts, only the simple reading
 of the current light value is supported through the IIO API.
 
-http://www.ti.com/product/opt3001
+https://www.ti.com/product/opt3001
 
 Required properties:
   - compatible: should be "ti,opt3001"
diff --git a/Documentation/devicetree/bindings/iio/light/vl6180.txt b/Documentation/devicetree/bindings/iio/light/vl6180.txt
index 2c52952715a0..fb9137d85df9 100644
--- a/Documentation/devicetree/bindings/iio/light/vl6180.txt
+++ b/Documentation/devicetree/bindings/iio/light/vl6180.txt
@@ -1,6 +1,6 @@
 STMicro VL6180 -  ALS, range and proximity sensor
 
-Link to datasheet: http://www.st.com/resource/en/datasheet/vl6180x.pdf
+Link to datasheet: https://www.st.com/resource/en/datasheet/vl6180x.pdf
 
 Required properties:
 
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
index 566711b9950c..4f245e8469fd 100644
--- a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
+++ b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
@@ -1,7 +1,7 @@
 * Microchip MCP41010/41050/41100/42010/42050/42100 Digital Potentiometer
 
 Datasheet publicly available at:
-http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
+https://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
 
 The node for this driver must be a child node of a SPI controller, hence
 all mandatory properties described in
diff --git a/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt b/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
index e6d0c2eb345c..f3ab02b0dd41 100644
--- a/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
+++ b/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
@@ -1,7 +1,7 @@
 * Texas Instruments LMP91000 series of potentiostats
 
-LMP91000: http://www.ti.com/lit/ds/symlink/lmp91000.pdf
-LMP91002: http://www.ti.com/lit/ds/symlink/lmp91002.pdf
+LMP91000: https://www.ti.com/lit/ds/symlink/lmp91000.pdf
+LMP91002: https://www.ti.com/lit/ds/symlink/lmp91002.pdf
 
 Required properties:
 
diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
index 64c18f1693f0..be2be4b556db 100644
--- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
@@ -13,7 +13,7 @@ description: |
   Bindings for the All Sensors DLH series pressure sensors.
 
   Specifications about the sensors can be found at:
-    http://www.allsensors.com/cad/DS-0355_Rev_B.PDF
+    https://www.allsensors.com/cad/DS-0355_Rev_B.PDF
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
index f86f8b23ef18..ce795279839e 100644
--- a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
@@ -17,9 +17,9 @@ description: |
     until it is received once again
 
   Specifications about the devices can be found at:
-  http://www.robot-electronics.co.uk/htm/srf04tech.htm
+  https://www.robot-electronics.co.uk/htm/srf04tech.htm
 
-  http://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
+  https://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
 
 properties:
   compatible:
-- 
2.27.0


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v2] Replace HTTP links with HTTPS ones: Documentation/devicetree/bindings/iio
  2020-07-04 19:33   ` [PATCH v2] " Alexander A. Klimov
@ 2020-07-04 23:05     ` Matt Ranostay
  2020-07-12 13:22       ` Jonathan Cameron
  0 siblings, 1 reply; 5+ messages in thread
From: Matt Ranostay @ 2020-07-04 23:05 UTC (permalink / raw)
  To: Alexander A. Klimov
  Cc: Jonathan Cameron, Rob Herring,
	open list:IIO SUBSYSTEM AND DRIVERS, devicetree, open list

On Sat, Jul 4, 2020 at 12:34 PM Alexander A. Klimov
<grandmaster@al2klimov.de> wrote:
>
> Rationale:
> Reduces attack surface on kernel devs opening the links for MITM
> as HTTPS traffic is much harder to manipulate.
>

With regards to the drivers that I've authored the changes look good to me.

Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>


> Deterministic algorithm:
> For each file:
>   If not .svg:
>     For each line:
>       If doesn't contain `\bxmlns\b`:
>         For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
>           If both the HTTP and HTTPS versions
>           return 200 OK and serve the same content:
>             Replace HTTP with HTTPS.
>
> Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
> ---
>  Changes in v2:
>  Addressed https://lore.kernel.org/linux-iio/20200704173459.78ceec60@archlinux/
>
>  Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml  | 4 ++--
>  Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt      | 2 +-
>  Documentation/devicetree/bindings/iio/iio-bindings.txt        | 2 +-
>  Documentation/devicetree/bindings/iio/light/apds9300.txt      | 2 +-
>  Documentation/devicetree/bindings/iio/light/apds9960.txt      | 2 +-
>  Documentation/devicetree/bindings/iio/light/opt3001.txt       | 2 +-
>  Documentation/devicetree/bindings/iio/light/vl6180.txt        | 2 +-
>  .../devicetree/bindings/iio/potentiometer/mcp41010.txt        | 2 +-
>  .../devicetree/bindings/iio/potentiostat/lmp91000.txt         | 4 ++--
>  .../devicetree/bindings/iio/pressure/asc,dlhl60d.yaml         | 2 +-
>  .../devicetree/bindings/iio/proximity/devantech-srf04.yaml    | 4 ++--
>  11 files changed, 14 insertions(+), 14 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> index d124eba1ce54..fd4eaa3d0ab4 100644
> --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> @@ -12,8 +12,8 @@ maintainers:
>  description: |
>    Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers that supports
>    both I2C & SPI interfaces.
> -    http://www.analog.com/en/products/mems/accelerometers/adxl345.html
> -    http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
> +    https://www.analog.com/en/products/mems/accelerometers/adxl345.html
> +    https://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
>
>  properties:
>    compatible:
> diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> index 639c94ed83e9..17af395b99d9 100644
> --- a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> @@ -6,7 +6,7 @@ Is is programmable through an SPI interface.
>
>  The internal DACs are loaded when the LOADDACS pin is pulled down.
>
> -http://www.ti.com/lit/ds/sbas106/sbas106.pdf
> +https://www.ti.com/lit/ds/sbas106/sbas106.pdf
>
>  Required Properties:
>  - compatible: Should be one of:
> diff --git a/Documentation/devicetree/bindings/iio/iio-bindings.txt b/Documentation/devicetree/bindings/iio/iio-bindings.txt
> index af33267727f4..aa63cac7323e 100644
> --- a/Documentation/devicetree/bindings/iio/iio-bindings.txt
> +++ b/Documentation/devicetree/bindings/iio/iio-bindings.txt
> @@ -9,7 +9,7 @@ specifier is an array of one or more cells identifying the IIO
>  output on a device. The length of an IIO specifier is defined by the
>  value of a #io-channel-cells property in the IIO provider node.
>
> -[1] http://marc.info/?l=linux-iio&m=135902119507483&w=2
> +[1] https://marc.info/?l=linux-iio&m=135902119507483&w=2
>
>  ==IIO providers==
>
> diff --git a/Documentation/devicetree/bindings/iio/light/apds9300.txt b/Documentation/devicetree/bindings/iio/light/apds9300.txt
> index aa199e09a493..3aa6db3ee99d 100644
> --- a/Documentation/devicetree/bindings/iio/light/apds9300.txt
> +++ b/Documentation/devicetree/bindings/iio/light/apds9300.txt
> @@ -1,6 +1,6 @@
>  * Avago APDS9300 ambient light sensor
>
> -http://www.avagotech.com/docs/AV02-1077EN
> +https://www.avagotech.com/docs/AV02-1077EN
>
>  Required properties:
>
> diff --git a/Documentation/devicetree/bindings/iio/light/apds9960.txt b/Documentation/devicetree/bindings/iio/light/apds9960.txt
> index 3af325ad194b..c53ddb81c4aa 100644
> --- a/Documentation/devicetree/bindings/iio/light/apds9960.txt
> +++ b/Documentation/devicetree/bindings/iio/light/apds9960.txt
> @@ -1,6 +1,6 @@
>  * Avago APDS9960 gesture/RGB/ALS/proximity sensor
>
> -http://www.avagotech.com/docs/AV02-4191EN
> +https://www.avagotech.com/docs/AV02-4191EN
>
>  Required properties:
>
> diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt
> index 47b13eb8f4ec..9e6f2998e751 100644
> --- a/Documentation/devicetree/bindings/iio/light/opt3001.txt
> +++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt
> @@ -6,7 +6,7 @@ the optional generation of IIO events on rising/falling light threshold changes
>  requires the use of interrupts. Without interrupts, only the simple reading
>  of the current light value is supported through the IIO API.
>
> -http://www.ti.com/product/opt3001
> +https://www.ti.com/product/opt3001
>
>  Required properties:
>    - compatible: should be "ti,opt3001"
> diff --git a/Documentation/devicetree/bindings/iio/light/vl6180.txt b/Documentation/devicetree/bindings/iio/light/vl6180.txt
> index 2c52952715a0..fb9137d85df9 100644
> --- a/Documentation/devicetree/bindings/iio/light/vl6180.txt
> +++ b/Documentation/devicetree/bindings/iio/light/vl6180.txt
> @@ -1,6 +1,6 @@
>  STMicro VL6180 -  ALS, range and proximity sensor
>
> -Link to datasheet: http://www.st.com/resource/en/datasheet/vl6180x.pdf
> +Link to datasheet: https://www.st.com/resource/en/datasheet/vl6180x.pdf
>
>  Required properties:
>
> diff --git a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> index 566711b9950c..4f245e8469fd 100644
> --- a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> +++ b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> @@ -1,7 +1,7 @@
>  * Microchip MCP41010/41050/41100/42010/42050/42100 Digital Potentiometer
>
>  Datasheet publicly available at:
> -http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
> +https://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
>
>  The node for this driver must be a child node of a SPI controller, hence
>  all mandatory properties described in
> diff --git a/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt b/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
> index e6d0c2eb345c..f3ab02b0dd41 100644
> --- a/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
> +++ b/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
> @@ -1,7 +1,7 @@
>  * Texas Instruments LMP91000 series of potentiostats
>
> -LMP91000: http://www.ti.com/lit/ds/symlink/lmp91000.pdf
> -LMP91002: http://www.ti.com/lit/ds/symlink/lmp91002.pdf
> +LMP91000: https://www.ti.com/lit/ds/symlink/lmp91000.pdf
> +LMP91002: https://www.ti.com/lit/ds/symlink/lmp91002.pdf
>
>  Required properties:
>
> diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> index 64c18f1693f0..be2be4b556db 100644
> --- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> +++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> @@ -13,7 +13,7 @@ description: |
>    Bindings for the All Sensors DLH series pressure sensors.
>
>    Specifications about the sensors can be found at:
> -    http://www.allsensors.com/cad/DS-0355_Rev_B.PDF
> +    https://www.allsensors.com/cad/DS-0355_Rev_B.PDF
>
>  properties:
>    compatible:
> diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> index f86f8b23ef18..ce795279839e 100644
> --- a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> +++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> @@ -17,9 +17,9 @@ description: |
>      until it is received once again
>
>    Specifications about the devices can be found at:
> -  http://www.robot-electronics.co.uk/htm/srf04tech.htm
> +  https://www.robot-electronics.co.uk/htm/srf04tech.htm
>
> -  http://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
> +  https://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
>
>  properties:
>    compatible:
> --
> 2.27.0
>

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v2] Replace HTTP links with HTTPS ones: Documentation/devicetree/bindings/iio
  2020-07-04 23:05     ` Matt Ranostay
@ 2020-07-12 13:22       ` Jonathan Cameron
  0 siblings, 0 replies; 5+ messages in thread
From: Jonathan Cameron @ 2020-07-12 13:22 UTC (permalink / raw)
  To: Matt Ranostay
  Cc: Alexander A. Klimov, Rob Herring,
	open list:IIO SUBSYSTEM AND DRIVERS, devicetree, open list

On Sat, 4 Jul 2020 16:05:01 -0700
Matt Ranostay <matt.ranostay@konsulko.com> wrote:

> On Sat, Jul 4, 2020 at 12:34 PM Alexander A. Klimov
> <grandmaster@al2klimov.de> wrote:
> >
> > Rationale:
> > Reduces attack surface on kernel devs opening the links for MITM
> > as HTTPS traffic is much harder to manipulate.
> >  
> 
> With regards to the drivers that I've authored the changes look good to me.
> 
> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Applied. Thanks
> 
> 
> > Deterministic algorithm:
> > For each file:
> >   If not .svg:
> >     For each line:
> >       If doesn't contain `\bxmlns\b`:
> >         For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
> >           If both the HTTP and HTTPS versions
> >           return 200 OK and serve the same content:
> >             Replace HTTP with HTTPS.
> >
> > Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
> > ---
> >  Changes in v2:
> >  Addressed https://lore.kernel.org/linux-iio/20200704173459.78ceec60@archlinux/
> >
> >  Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml  | 4 ++--
> >  Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt      | 2 +-
> >  Documentation/devicetree/bindings/iio/iio-bindings.txt        | 2 +-
> >  Documentation/devicetree/bindings/iio/light/apds9300.txt      | 2 +-
> >  Documentation/devicetree/bindings/iio/light/apds9960.txt      | 2 +-
> >  Documentation/devicetree/bindings/iio/light/opt3001.txt       | 2 +-
> >  Documentation/devicetree/bindings/iio/light/vl6180.txt        | 2 +-
> >  .../devicetree/bindings/iio/potentiometer/mcp41010.txt        | 2 +-
> >  .../devicetree/bindings/iio/potentiostat/lmp91000.txt         | 4 ++--
> >  .../devicetree/bindings/iio/pressure/asc,dlhl60d.yaml         | 2 +-
> >  .../devicetree/bindings/iio/proximity/devantech-srf04.yaml    | 4 ++--
> >  11 files changed, 14 insertions(+), 14 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> > index d124eba1ce54..fd4eaa3d0ab4 100644
> > --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> > +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> > @@ -12,8 +12,8 @@ maintainers:
> >  description: |
> >    Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers that supports
> >    both I2C & SPI interfaces.
> > -    http://www.analog.com/en/products/mems/accelerometers/adxl345.html
> > -    http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
> > +    https://www.analog.com/en/products/mems/accelerometers/adxl345.html
> > +    https://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
> >
> >  properties:
> >    compatible:
> > diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> > index 639c94ed83e9..17af395b99d9 100644
> > --- a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> > +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> > @@ -6,7 +6,7 @@ Is is programmable through an SPI interface.
> >
> >  The internal DACs are loaded when the LOADDACS pin is pulled down.
> >
> > -http://www.ti.com/lit/ds/sbas106/sbas106.pdf
> > +https://www.ti.com/lit/ds/sbas106/sbas106.pdf
> >
> >  Required Properties:
> >  - compatible: Should be one of:
> > diff --git a/Documentation/devicetree/bindings/iio/iio-bindings.txt b/Documentation/devicetree/bindings/iio/iio-bindings.txt
> > index af33267727f4..aa63cac7323e 100644
> > --- a/Documentation/devicetree/bindings/iio/iio-bindings.txt
> > +++ b/Documentation/devicetree/bindings/iio/iio-bindings.txt
> > @@ -9,7 +9,7 @@ specifier is an array of one or more cells identifying the IIO
> >  output on a device. The length of an IIO specifier is defined by the
> >  value of a #io-channel-cells property in the IIO provider node.
> >
> > -[1] http://marc.info/?l=linux-iio&m=135902119507483&w=2
> > +[1] https://marc.info/?l=linux-iio&m=135902119507483&w=2
> >
> >  ==IIO providers==
> >
> > diff --git a/Documentation/devicetree/bindings/iio/light/apds9300.txt b/Documentation/devicetree/bindings/iio/light/apds9300.txt
> > index aa199e09a493..3aa6db3ee99d 100644
> > --- a/Documentation/devicetree/bindings/iio/light/apds9300.txt
> > +++ b/Documentation/devicetree/bindings/iio/light/apds9300.txt
> > @@ -1,6 +1,6 @@
> >  * Avago APDS9300 ambient light sensor
> >
> > -http://www.avagotech.com/docs/AV02-1077EN
> > +https://www.avagotech.com/docs/AV02-1077EN
> >
> >  Required properties:
> >
> > diff --git a/Documentation/devicetree/bindings/iio/light/apds9960.txt b/Documentation/devicetree/bindings/iio/light/apds9960.txt
> > index 3af325ad194b..c53ddb81c4aa 100644
> > --- a/Documentation/devicetree/bindings/iio/light/apds9960.txt
> > +++ b/Documentation/devicetree/bindings/iio/light/apds9960.txt
> > @@ -1,6 +1,6 @@
> >  * Avago APDS9960 gesture/RGB/ALS/proximity sensor
> >
> > -http://www.avagotech.com/docs/AV02-4191EN
> > +https://www.avagotech.com/docs/AV02-4191EN
> >
> >  Required properties:
> >
> > diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt
> > index 47b13eb8f4ec..9e6f2998e751 100644
> > --- a/Documentation/devicetree/bindings/iio/light/opt3001.txt
> > +++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt
> > @@ -6,7 +6,7 @@ the optional generation of IIO events on rising/falling light threshold changes
> >  requires the use of interrupts. Without interrupts, only the simple reading
> >  of the current light value is supported through the IIO API.
> >
> > -http://www.ti.com/product/opt3001
> > +https://www.ti.com/product/opt3001
> >
> >  Required properties:
> >    - compatible: should be "ti,opt3001"
> > diff --git a/Documentation/devicetree/bindings/iio/light/vl6180.txt b/Documentation/devicetree/bindings/iio/light/vl6180.txt
> > index 2c52952715a0..fb9137d85df9 100644
> > --- a/Documentation/devicetree/bindings/iio/light/vl6180.txt
> > +++ b/Documentation/devicetree/bindings/iio/light/vl6180.txt
> > @@ -1,6 +1,6 @@
> >  STMicro VL6180 -  ALS, range and proximity sensor
> >
> > -Link to datasheet: http://www.st.com/resource/en/datasheet/vl6180x.pdf
> > +Link to datasheet: https://www.st.com/resource/en/datasheet/vl6180x.pdf
> >
> >  Required properties:
> >
> > diff --git a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> > index 566711b9950c..4f245e8469fd 100644
> > --- a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> > +++ b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> > @@ -1,7 +1,7 @@
> >  * Microchip MCP41010/41050/41100/42010/42050/42100 Digital Potentiometer
> >
> >  Datasheet publicly available at:
> > -http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
> > +https://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
> >
> >  The node for this driver must be a child node of a SPI controller, hence
> >  all mandatory properties described in
> > diff --git a/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt b/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
> > index e6d0c2eb345c..f3ab02b0dd41 100644
> > --- a/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
> > +++ b/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
> > @@ -1,7 +1,7 @@
> >  * Texas Instruments LMP91000 series of potentiostats
> >
> > -LMP91000: http://www.ti.com/lit/ds/symlink/lmp91000.pdf
> > -LMP91002: http://www.ti.com/lit/ds/symlink/lmp91002.pdf
> > +LMP91000: https://www.ti.com/lit/ds/symlink/lmp91000.pdf
> > +LMP91002: https://www.ti.com/lit/ds/symlink/lmp91002.pdf
> >
> >  Required properties:
> >
> > diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> > index 64c18f1693f0..be2be4b556db 100644
> > --- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> > +++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> > @@ -13,7 +13,7 @@ description: |
> >    Bindings for the All Sensors DLH series pressure sensors.
> >
> >    Specifications about the sensors can be found at:
> > -    http://www.allsensors.com/cad/DS-0355_Rev_B.PDF
> > +    https://www.allsensors.com/cad/DS-0355_Rev_B.PDF
> >
> >  properties:
> >    compatible:
> > diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> > index f86f8b23ef18..ce795279839e 100644
> > --- a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> > +++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> > @@ -17,9 +17,9 @@ description: |
> >      until it is received once again
> >
> >    Specifications about the devices can be found at:
> > -  http://www.robot-electronics.co.uk/htm/srf04tech.htm
> > +  https://www.robot-electronics.co.uk/htm/srf04tech.htm
> >
> > -  http://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
> > +  https://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
> >
> >  properties:
> >    compatible:
> > --
> > 2.27.0
> >  


^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, back to index

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-03 18:57 [PATCH] Replace HTTP links with HTTPS ones: Documentation/devicetree/bindings/iio Alexander A. Klimov
2020-07-04 16:34 ` Jonathan Cameron
2020-07-04 19:33   ` [PATCH v2] " Alexander A. Klimov
2020-07-04 23:05     ` Matt Ranostay
2020-07-12 13:22       ` Jonathan Cameron

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git