linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Alexander Tsoy <alexander@tsoy.me>,
	Takashi Iwai <tiwai@suse.de>, Sasha Levin <sashal@kernel.org>,
	Hans de Goede <jwrdegoede@fedoraproject.org>
Subject: [PATCH 4.9 18/24] Revert "ALSA: usb-audio: Improve frames size computation"
Date: Tue,  7 Jul 2020 17:13:50 +0200	[thread overview]
Message-ID: <20200707145749.849989609@linuxfoundation.org> (raw)
In-Reply-To: <20200707145748.952502272@linuxfoundation.org>

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 5ef30e443e6d3654cccecec99cf481a69a0a6d3b which is
commit f0bd62b64016508938df9babe47f65c2c727d25c upstream.

It causes a number of reported issues and a fix for it has not hit
Linus's tree yet.  Revert this to resolve those problems.

Cc: Alexander Tsoy <alexander@tsoy.me>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Hans de Goede <jwrdegoede@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/card.h     |    4 ----
 sound/usb/endpoint.c |   43 +++++--------------------------------------
 sound/usb/endpoint.h |    1 -
 sound/usb/pcm.c      |    2 --
 4 files changed, 5 insertions(+), 45 deletions(-)

--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -80,10 +80,6 @@ struct snd_usb_endpoint {
 	dma_addr_t sync_dma;		/* DMA address of syncbuf */
 
 	unsigned int pipe;		/* the data i/o pipe */
-	unsigned int framesize[2];	/* small/large frame sizes in samples */
-	unsigned int sample_rem;	/* remainder from division fs/fps */
-	unsigned int sample_accum;	/* sample accumulator */
-	unsigned int fps;		/* frames per second */
 	unsigned int freqn;		/* nominal sampling rate in fs/fps in Q16.16 format */
 	unsigned int freqm;		/* momentary sampling rate in fs/fps in Q16.16 format */
 	int	   freqshift;		/* how much to shift the feedback value to get Q16.16 */
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -137,12 +137,12 @@ int snd_usb_endpoint_implicit_feedback_s
 
 /*
  * For streaming based on information derived from sync endpoints,
- * prepare_outbound_urb_sizes() will call slave_next_packet_size() to
+ * prepare_outbound_urb_sizes() will call next_packet_size() to
  * determine the number of samples to be sent in the next packet.
  *
- * For implicit feedback, slave_next_packet_size() is unused.
+ * For implicit feedback, next_packet_size() is unused.
  */
-int snd_usb_endpoint_slave_next_packet_size(struct snd_usb_endpoint *ep)
+int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep)
 {
 	unsigned long flags;
 	int ret;
@@ -159,29 +159,6 @@ int snd_usb_endpoint_slave_next_packet_s
 	return ret;
 }
 
-/*
- * For adaptive and synchronous endpoints, prepare_outbound_urb_sizes()
- * will call next_packet_size() to determine the number of samples to be
- * sent in the next packet.
- */
-int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep)
-{
-	int ret;
-
-	if (ep->fill_max)
-		return ep->maxframesize;
-
-	ep->sample_accum += ep->sample_rem;
-	if (ep->sample_accum >= ep->fps) {
-		ep->sample_accum -= ep->fps;
-		ret = ep->framesize[1];
-	} else {
-		ret = ep->framesize[0];
-	}
-
-	return ret;
-}
-
 static void retire_outbound_urb(struct snd_usb_endpoint *ep,
 				struct snd_urb_ctx *urb_ctx)
 {
@@ -226,8 +203,6 @@ static void prepare_silent_urb(struct sn
 
 		if (ctx->packet_size[i])
 			counts = ctx->packet_size[i];
-		else if (ep->sync_master)
-			counts = snd_usb_endpoint_slave_next_packet_size(ep);
 		else
 			counts = snd_usb_endpoint_next_packet_size(ep);
 
@@ -900,17 +875,10 @@ int snd_usb_endpoint_set_params(struct s
 	ep->maxpacksize = fmt->maxpacksize;
 	ep->fill_max = !!(fmt->attributes & UAC_EP_CS_ATTR_FILL_MAX);
 
-	if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_FULL) {
+	if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_FULL)
 		ep->freqn = get_usb_full_speed_rate(rate);
-		ep->fps = 1000;
-	} else {
+	else
 		ep->freqn = get_usb_high_speed_rate(rate);
-		ep->fps = 8000;
-	}
-
-	ep->sample_rem = rate % ep->fps;
-	ep->framesize[0] = rate / ep->fps;
-	ep->framesize[1] = (rate + (ep->fps - 1)) / ep->fps;
 
 	/* calculate the frequency in 16.16 format */
 	ep->freqm = ep->freqn;
@@ -969,7 +937,6 @@ int snd_usb_endpoint_start(struct snd_us
 	ep->active_mask = 0;
 	ep->unlink_mask = 0;
 	ep->phase = 0;
-	ep->sample_accum = 0;
 
 	snd_usb_endpoint_start_quirk(ep);
 
--- a/sound/usb/endpoint.h
+++ b/sound/usb/endpoint.h
@@ -27,7 +27,6 @@ void snd_usb_endpoint_release(struct snd
 void snd_usb_endpoint_free(struct snd_usb_endpoint *ep);
 
 int snd_usb_endpoint_implicit_feedback_sink(struct snd_usb_endpoint *ep);
-int snd_usb_endpoint_slave_next_packet_size(struct snd_usb_endpoint *ep);
 int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep);
 
 void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep,
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -1483,8 +1483,6 @@ static void prepare_playback_urb(struct
 	for (i = 0; i < ctx->packets; i++) {
 		if (ctx->packet_size[i])
 			counts = ctx->packet_size[i];
-		else if (ep->sync_master)
-			counts = snd_usb_endpoint_slave_next_packet_size(ep);
 		else
 			counts = snd_usb_endpoint_next_packet_size(ep);
 



  parent reply	other threads:[~2020-07-07 15:14 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-07 15:13 [PATCH 4.9 00/24] 4.9.230-rc1 review Greg Kroah-Hartman
2020-07-07 15:13 ` [PATCH 4.9 01/24] btrfs: fix a block group ref counter leak after failure to remove block group Greg Kroah-Hartman
2020-07-07 15:13 ` [PATCH 4.9 02/24] btrfs: cow_file_range() num_bytes and disk_num_bytes are same Greg Kroah-Hartman
2020-07-07 15:13 ` [PATCH 4.9 03/24] btrfs: fix data block group relocation failure due to concurrent scrub Greg Kroah-Hartman
2020-07-07 15:13 ` [PATCH 4.9 04/24] mm: fix swap cache node allocation mask Greg Kroah-Hartman
2020-07-07 15:13 ` [PATCH 4.9 05/24] EDAC/amd64: Read back the scrub rate PCI register on F15h Greg Kroah-Hartman
2020-07-07 15:13 ` [PATCH 4.9 06/24] usbnet: smsc95xx: Fix use-after-free after removal Greg Kroah-Hartman
2020-07-07 15:13 ` [PATCH 4.9 07/24] mm/slub.c: fix corrupted freechain in deactivate_slab() Greg Kroah-Hartman
2020-07-07 15:13 ` [PATCH 4.9 08/24] mm/slub: fix stack overruns with SLUB_STATS Greg Kroah-Hartman
2020-07-07 15:13 ` [PATCH 4.9 09/24] usb: usbtest: fix missing kfree(dev->buf) in usbtest_disconnect Greg Kroah-Hartman
2020-07-07 15:13 ` [PATCH 4.9 10/24] kgdb: Avoid suspicious RCU usage warning Greg Kroah-Hartman
2020-07-07 15:13 ` [PATCH 4.9 11/24] crypto: af_alg - fix use-after-free in af_alg_accept() due to bh_lock_sock() Greg Kroah-Hartman
2020-07-07 15:13 ` [PATCH 4.9 12/24] sched/rt: Show the sched_rr_timeslice SCHED_RR timeslice tuning knob in milliseconds Greg Kroah-Hartman
2020-07-07 15:13 ` [PATCH 4.9 13/24] cxgb4: parse TC-U32 key values and masks natively Greg Kroah-Hartman
2020-07-07 15:13 ` [PATCH 4.9 14/24] hwmon: (max6697) Make sure the OVERT mask is set correctly Greg Kroah-Hartman
2020-07-07 15:13 ` [PATCH 4.9 15/24] hwmon: (acpi_power_meter) Fix potential memory leak in acpi_power_meter_add() Greg Kroah-Hartman
2020-07-07 15:13 ` [PATCH 4.9 16/24] virtio-blk: free vblk-vqs in error path of virtblk_probe() Greg Kroah-Hartman
2020-07-07 15:13 ` [PATCH 4.9 17/24] i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665 Greg Kroah-Hartman
2020-07-07 15:13 ` Greg Kroah-Hartman [this message]
2020-07-07 15:13 ` [PATCH 4.9 19/24] SMB3: Honor seal flag for multiuser mounts Greg Kroah-Hartman
2020-07-07 15:13 ` [PATCH 4.9 20/24] SMB3: Honor persistent/resilient handle flags " Greg Kroah-Hartman
2020-07-07 15:13 ` [PATCH 4.9 21/24] cifs: Fix the target file was deleted when rename failed Greg Kroah-Hartman
2020-07-07 15:13 ` [PATCH 4.9 22/24] MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen Greg Kroah-Hartman
2020-07-07 15:13 ` [PATCH 4.9 23/24] netfilter: nf_conntrack_h323: lost .data_len definition for Q.931/ipv6 Greg Kroah-Hartman
2020-07-07 15:13 ` [PATCH 4.9 24/24] efi: Make it possible to disable efivar_ssdt entirely Greg Kroah-Hartman
2020-07-08  6:38 ` [PATCH 4.9 00/24] 4.9.230-rc1 review Naresh Kamboju
2020-07-08  8:40 ` Jon Hunter
2020-07-08 15:13 ` Shuah Khan
2020-07-08 17:51 ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200707145749.849989609@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=alexander@tsoy.me \
    --cc=jwrdegoede@fedoraproject.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sashal@kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).