[PATCH 5.4 00/65] 5.4.51-rc1 review

[PATCH 5.4 00/65] 5.4.51-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.4.51 release.
There are 65 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu, 09 Jul 2020 14:57:34 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.51-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.4.51-rc1

Peter Jones <pjones@redhat.com>
    efi: Make it possible to disable efivar_ssdt entirely

Hou Tao <houtao1@huawei.com>
    dm zoned: assign max_io_len correctly

Babu Moger <babu.moger@amd.com>
    x86/resctrl: Fix memory bandwidth counter width for AMD

Vlastimil Babka <vbabka@suse.cz>
    mm, compaction: make capture control handling safe wrt interrupts

Vlastimil Babka <vbabka@suse.cz>
    mm, compaction: fully assume capture is not NULL in compact_zone_order()

Marc Zyngier <maz@kernel.org>
    irqchip/gic: Atomically update affinity

Sumit Semwal <sumit.semwal@linaro.org>
    dma-buf: Move dma_buf_release() from fops to dentry_ops

Alex Deucher <alexander.deucher@amd.com>
    drm/amdgpu/atomfirmware: fix vram_info fetching for renoir

Alex Deucher <alexander.deucher@amd.com>
    drm/amdgpu: use %u rather than %d for sclk/mclk

Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
    drm/amd/display: Only revalidate bandwidth on medium and fast updates

Hauke Mehrtens <hauke@hauke-m.de>
    MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen

Martin Blumenstingl <martin.blumenstingl@googlemail.com>
    MIPS: lantiq: xway: sysctrl: fix the GPHY clock alias names

Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
    cifs: Fix the target file was deleted when rename failed.

Paul Aurich <paul@darkrain42.org>
    SMB3: Honor 'handletimeout' flag for multiuser mounts

Paul Aurich <paul@darkrain42.org>
    SMB3: Honor lease disabling for multiuser mounts

Paul Aurich <paul@darkrain42.org>
    SMB3: Honor persistent/resilient handle flags for multiuser mounts

Paul Aurich <paul@darkrain42.org>
    SMB3: Honor 'seal' flag for multiuser mounts

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "ALSA: usb-audio: Improve frames size computation"

J. Bruce Fields <bfields@redhat.com>
    nfsd: apply umask on fs without ACL support

Krzysztof Kozlowski <krzk@kernel.org>
    spi: spi-fsl-dspi: Fix external abort on interrupt in resume or exit paths

Wolfram Sang <wsa+renesas@sang-engineering.com>
    i2c: mlxcpld: check correct size of maximum RECV_LEN packet

Chris Packham <chris.packham@alliedtelesis.co.nz>
    i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665

Kees Cook <keescook@chromium.org>
    samples/vfs: avoid warning in statx override

Christoph Hellwig <hch@lst.de>
    nvme: fix a crash in nvme_mpath_add_disk

Sagi Grimberg <sagi@grimberg.me>
    nvme: fix identify error status silent ignore

Paul Aurich <paul@darkrain42.org>
    SMB3: Honor 'posix' flag for multiuser mounts

Hou Tao <houtao1@huawei.com>
    virtio-blk: free vblk-vqs in error path of virtblk_probe()

Chen-Yu Tsai <wens@csie.org>
    drm: sun4i: hdmi: Remove extra HPD polling

J. Bruce Fields <bfields@redhat.com>
    nfsd: fix nfsdfs inode reference count leak

J. Bruce Fields <bfields@redhat.com>
    nfsd4: fix nfsdfs reference count loop

J. Bruce Fields <bfields@redhat.com>
    nfsd: clients don't need to break their own delegations

J. Bruce Fields <bfields@redhat.com>
    kthread: save thread function

Dien Pham <dien.pham.ry@renesas.com>
    thermal/drivers/rcar_gen3: Fix undefined temperature if negative

Michael Kao <michael.kao@mediatek.com>
    thermal/drivers/mediatek: Fix bank number settings on mt8183

Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
    hwmon: (acpi_power_meter) Fix potential memory leak in acpi_power_meter_add()

Chu Lin <linchuyuan@google.com>
    hwmon: (max6697) Make sure the OVERT mask is set correctly

Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
    cxgb4: fix SGE queue dump destination buffer context

Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
    cxgb4: use correct type for all-mask IP address comparison

Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
    cxgb4: fix endian conversions for L4 ports in filters

Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
    cxgb4: parse TC-U32 key values and masks natively

Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
    cxgb4: use unaligned conversion for fetching timestamp

Mark Zhang <markz@mellanox.com>
    RDMA/counter: Query a counter before release

David Howells <dhowells@redhat.com>
    rxrpc: Fix afs large storage transmission performance drop

Chen Tao <chentao107@huawei.com>
    drm/msm/dpu: fix error return code in dpu_encoder_init

Herbert Xu <herbert@gondor.apana.org.au>
    crypto: af_alg - fix use-after-free in af_alg_accept() due to bh_lock_sock()

James Bottomley <James.Bottomley@HansenPartnership.com>
    tpm: Fix TIS locality timeout problems

Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
    selftests: tpm: Use /bin/sh instead of /bin/bash

Douglas Anderson <dianders@chromium.org>
    kgdb: Avoid suspicious RCU usage warning

Sagi Grimberg <sagi@grimberg.me>
    nvme-multipath: fix bogus request queue reference put

Anton Eidelman <anton@lightbitslabs.com>
    nvme-multipath: fix deadlock due to head->lock

Anton Eidelman <anton@lightbitslabs.com>
    nvme-multipath: fix deadlock between ana_work and scan_work

Sagi Grimberg <sagi@grimberg.me>
    nvme: fix possible deadlock when I/O is blocked

Keith Busch <kbusch@kernel.org>
    nvme-multipath: set bdi capabilities once

Christian Borntraeger <borntraeger@de.ibm.com>
    s390/debug: avoid kernel warning on too large number of pages

Steven Rostedt (VMware) <rostedt@goodmis.org>
    tools lib traceevent: Handle __attribute__((user)) in field names

Steven Rostedt (VMware) <rostedt@goodmis.org>
    tools lib traceevent: Add append() function helper for appending strings

Zqiang <qiang.zhang@windriver.com>
    usb: usbtest: fix missing kfree(dev->buf) in usbtest_disconnect

David Howells <dhowells@redhat.com>
    rxrpc: Fix race between incoming ACK parser and retransmitter

Qian Cai <cai@lca.pw>
    mm/slub: fix stack overruns with SLUB_STATS

Dongli Zhang <dongli.zhang@oracle.com>
    mm/slub.c: fix corrupted freechain in deactivate_slab()

Valentin Schneider <valentin.schneider@arm.com>
    sched/debug: Make sd->flags sysctl read-only

Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
    usbnet: smsc95xx: Fix use-after-free after removal

Borislav Petkov <bp@suse.de>
    EDAC/amd64: Read back the scrub rate PCI register on F15h

Hugh Dickins <hughd@google.com>
    mm: fix swap cache node allocation mask

Jens Axboe <axboe@kernel.dk>
    io_uring: make sure async workqueue is canceled on exit


-------------

Diffstat:

 Documentation/filesystems/locking.rst              |   2 +
 Makefile                                           |   4 +-
 arch/mips/kernel/traps.c                           |   1 +
 arch/mips/lantiq/xway/sysctrl.c                    |   8 +-
 arch/s390/kernel/debug.c                           |   3 +-
 arch/x86/kernel/cpu/resctrl/core.c                 |   2 +
 arch/x86/kernel/cpu/resctrl/internal.h             |   3 +
 arch/x86/kernel/cpu/resctrl/monitor.c              |   3 +-
 crypto/af_alg.c                                    |  26 ++--
 crypto/algif_aead.c                                |   9 +-
 crypto/algif_hash.c                                |   9 +-
 crypto/algif_skcipher.c                            |   9 +-
 drivers/block/virtio_blk.c                         |   1 +
 drivers/char/tpm/tpm-dev-common.c                  |  19 ++-
 drivers/dma-buf/dma-buf.c                          |  54 ++++-----
 drivers/edac/amd64_edac.c                          |   2 +
 drivers/firmware/efi/Kconfig                       |  11 ++
 drivers/firmware/efi/efi.c                         |   2 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_atomfirmware.c   |   1 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c             |   4 +-
 drivers/gpu/drm/amd/display/dc/core/dc.c           |  10 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c        |   2 +-
 drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c             |   5 +-
 drivers/hwmon/acpi_power_meter.c                   |   4 +-
 drivers/hwmon/max6697.c                            |   7 +-
 drivers/i2c/algos/i2c-algo-pca.c                   |   3 +-
 drivers/i2c/busses/i2c-mlxcpld.c                   |   4 +-
 drivers/infiniband/core/counters.c                 |   4 +-
 drivers/irqchip/irq-gic.c                          |  14 +--
 drivers/md/dm-zoned-target.c                       |   2 +-
 drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c     |   6 +-
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c  |  25 ++--
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c    |   2 +-
 .../net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c   |  30 ++---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c  |  18 +--
 .../ethernet/chelsio/cxgb4/cxgb4_tc_u32_parse.h    | 122 ++++++++++++-------
 drivers/net/ethernet/chelsio/cxgb4/sge.c           |   2 +-
 drivers/net/usb/smsc95xx.c                         |   2 +-
 drivers/nvme/host/core.c                           |  13 +-
 drivers/nvme/host/multipath.c                      |  45 +++++--
 drivers/nvme/host/nvme.h                           |   2 +
 drivers/spi/spi-fsl-dspi.c                         |  17 ++-
 drivers/thermal/mtk_thermal.c                      |   5 +-
 drivers/thermal/rcar_gen3_thermal.c                |   2 +-
 drivers/usb/misc/usbtest.c                         |   1 +
 fs/cifs/connect.c                                  |  10 +-
 fs/cifs/inode.c                                    |  10 +-
 fs/io_uring.c                                      |  63 ++++++++++
 fs/locks.c                                         |   3 +
 fs/nfsd/nfs4proc.c                                 |   2 +
 fs/nfsd/nfs4state.c                                |  22 +++-
 fs/nfsd/nfsctl.c                                   |  23 ++--
 fs/nfsd/nfsd.h                                     |   5 +
 fs/nfsd/nfssvc.c                                   |   6 +
 fs/nfsd/vfs.c                                      |   6 +
 include/crypto/if_alg.h                            |   4 +-
 include/linux/fs.h                                 |   1 +
 include/linux/kthread.h                            |   1 +
 include/linux/sunrpc/svc.h                         |   1 +
 kernel/debug/debug_core.c                          |   4 +
 kernel/kthread.c                                   |  17 +++
 kernel/sched/debug.c                               |   2 +-
 mm/compaction.c                                    |  19 ++-
 mm/slub.c                                          |  30 ++++-
 mm/swap_state.c                                    |   4 +-
 net/rxrpc/call_event.c                             |  29 ++---
 samples/vfs/test-statx.c                           |   2 +
 sound/usb/card.h                                   |   4 -
 sound/usb/endpoint.c                               |  43 +------
 sound/usb/endpoint.h                               |   1 -
 sound/usb/pcm.c                                    |   2 -
 tools/lib/traceevent/event-parse.c                 | 133 ++++++++++++---------
 tools/testing/selftests/tpm2/test_smoke.sh         |   2 +-
 tools/testing/selftests/tpm2/test_space.sh         |   2 +-
 74 files changed, 609 insertions(+), 362 deletions(-)

[PATCH 5.4 01/65] io_uring: make sure async workqueue is canceled on exit

[Greg Kroah-Hartman]

From: Jens Axboe <axboe@kernel.dk>

Track async work items that we queue, so we can safely cancel them
if the ring is closed or the process exits. Newer kernels handle
this automatically with io-wq, but the old workqueue based setup needs
a bit of special help to get there.

There's no upstream variant of this, as that would require backporting
all the io-wq changes from 5.5 and on. Hence I made a one-off that
ensures that we don't leak memory if we have async work items that
need active cancelation (like socket IO).

Reported-by: Agarwal, Anchal <anchalag@amazon.com>
Tested-by: Agarwal, Anchal <anchalag@amazon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/io_uring.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)

diff --git a/fs/io_uring.c b/fs/io_uring.c
index 7fa3cd3fff4d2..e0200406765c3 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -267,6 +267,9 @@ struct io_ring_ctx {
 #if defined(CONFIG_UNIX)
 	struct socket		*ring_sock;
 #endif
+
+	struct list_head	task_list;
+	spinlock_t		task_lock;
 };
 
 struct sqe_submit {
@@ -331,14 +334,18 @@ struct io_kiocb {
 #define REQ_F_ISREG		2048	/* regular file */
 #define REQ_F_MUST_PUNT		4096	/* must be punted even for NONBLOCK */
 #define REQ_F_TIMEOUT_NOSEQ	8192	/* no timeout sequence */
+#define REQ_F_CANCEL		16384	/* cancel request */
 	unsigned long		fsize;
 	u64			user_data;
 	u32			result;
 	u32			sequence;
+	struct task_struct	*task;
 
 	struct fs_struct	*fs;
 
 	struct work_struct	work;
+	struct task_struct	*work_task;
+	struct list_head	task_list;
 };
 
 #define IO_PLUG_THRESHOLD		2
@@ -425,6 +432,8 @@ static struct io_ring_ctx *io_ring_ctx_alloc(struct io_uring_params *p)
 	INIT_LIST_HEAD(&ctx->cancel_list);
 	INIT_LIST_HEAD(&ctx->defer_list);
 	INIT_LIST_HEAD(&ctx->timeout_list);
+	INIT_LIST_HEAD(&ctx->task_list);
+	spin_lock_init(&ctx->task_lock);
 	return ctx;
 }
 
@@ -492,6 +501,7 @@ static void __io_commit_cqring(struct io_ring_ctx *ctx)
 static inline void io_queue_async_work(struct io_ring_ctx *ctx,
 				       struct io_kiocb *req)
 {
+	unsigned long flags;
 	int rw = 0;
 
 	if (req->submit.sqe) {
@@ -503,6 +513,13 @@ static inline void io_queue_async_work(struct io_ring_ctx *ctx,
 		}
 	}
 
+	req->task = current;
+
+	spin_lock_irqsave(&ctx->task_lock, flags);
+	list_add(&req->task_list, &ctx->task_list);
+	req->work_task = NULL;
+	spin_unlock_irqrestore(&ctx->task_lock, flags);
+
 	queue_work(ctx->sqo_wq[rw], &req->work);
 }
 
@@ -2201,6 +2218,8 @@ static void io_sq_wq_submit_work(struct work_struct *work)
 
 	old_cred = override_creds(ctx->creds);
 	async_list = io_async_list_from_sqe(ctx, req->submit.sqe);
+
+	allow_kernel_signal(SIGINT);
 restart:
 	do {
 		struct sqe_submit *s = &req->submit;
@@ -2232,6 +2251,12 @@ static void io_sq_wq_submit_work(struct work_struct *work)
 		}
 
 		if (!ret) {
+			req->work_task = current;
+			if (req->flags & REQ_F_CANCEL) {
+				ret = -ECANCELED;
+				goto end_req;
+			}
+
 			s->has_user = cur_mm != NULL;
 			s->needs_lock = true;
 			do {
@@ -2246,6 +2271,12 @@ static void io_sq_wq_submit_work(struct work_struct *work)
 					break;
 				cond_resched();
 			} while (1);
+end_req:
+			if (!list_empty(&req->task_list)) {
+				spin_lock_irq(&ctx->task_lock);
+				list_del_init(&req->task_list);
+				spin_unlock_irq(&ctx->task_lock);
+			}
 		}
 
 		/* drop submission reference */
@@ -2311,6 +2342,7 @@ static void io_sq_wq_submit_work(struct work_struct *work)
 	}
 
 out:
+	disallow_signal(SIGINT);
 	if (cur_mm) {
 		set_fs(old_fs);
 		unuse_mm(cur_mm);
@@ -3675,12 +3707,32 @@ static int io_uring_fasync(int fd, struct file *file, int on)
 	return fasync_helper(fd, file, on, &ctx->cq_fasync);
 }
 
+static void io_cancel_async_work(struct io_ring_ctx *ctx,
+				 struct task_struct *task)
+{
+	if (list_empty(&ctx->task_list))
+		return;
+
+	spin_lock_irq(&ctx->task_lock);
+	while (!list_empty(&ctx->task_list)) {
+		struct io_kiocb *req;
+
+		req = list_first_entry(&ctx->task_list, struct io_kiocb, task_list);
+		list_del_init(&req->task_list);
+		req->flags |= REQ_F_CANCEL;
+		if (req->work_task && (!task || req->task == task))
+			send_sig(SIGINT, req->work_task, 1);
+	}
+	spin_unlock_irq(&ctx->task_lock);
+}
+
 static void io_ring_ctx_wait_and_kill(struct io_ring_ctx *ctx)
 {
 	mutex_lock(&ctx->uring_lock);
 	percpu_ref_kill(&ctx->refs);
 	mutex_unlock(&ctx->uring_lock);
 
+	io_cancel_async_work(ctx, NULL);
 	io_kill_timeouts(ctx);
 	io_poll_remove_all(ctx);
 	io_iopoll_reap_events(ctx);
@@ -3688,6 +3740,16 @@ static void io_ring_ctx_wait_and_kill(struct io_ring_ctx *ctx)
 	io_ring_ctx_free(ctx);
 }
 
+static int io_uring_flush(struct file *file, void *data)
+{
+	struct io_ring_ctx *ctx = file->private_data;
+
+	if (fatal_signal_pending(current) || (current->flags & PF_EXITING))
+		io_cancel_async_work(ctx, current);
+
+	return 0;
+}
+
 static int io_uring_release(struct inode *inode, struct file *file)
 {
 	struct io_ring_ctx *ctx = file->private_data;
@@ -3792,6 +3854,7 @@ SYSCALL_DEFINE6(io_uring_enter, unsigned int, fd, u32, to_submit,
 
 static const struct file_operations io_uring_fops = {
 	.release	= io_uring_release,
+	.flush		= io_uring_flush,
 	.mmap		= io_uring_mmap,
 	.poll		= io_uring_poll,
 	.fasync		= io_uring_fasync,
-- 
2.25.1

[PATCH 5.4 02/65] mm: fix swap cache node allocation mask

[Greg Kroah-Hartman]

From: Hugh Dickins <hughd@google.com>

[ Upstream commit 243bce09c91b0145aeaedd5afba799d81841c030 ]

Chris Murphy reports that a slightly overcommitted load, testing swap
and zram along with i915, splats and keeps on splatting, when it had
better fail less noisily:

  gnome-shell: page allocation failure: order:0,
  mode:0x400d0(__GFP_IO|__GFP_FS|__GFP_COMP|__GFP_RECLAIMABLE),
  nodemask=(null),cpuset=/,mems_allowed=0
  CPU: 2 PID: 1155 Comm: gnome-shell Not tainted 5.7.0-1.fc33.x86_64 #1
  Call Trace:
    dump_stack+0x64/0x88
    warn_alloc.cold+0x75/0xd9
    __alloc_pages_slowpath.constprop.0+0xcfa/0xd30
    __alloc_pages_nodemask+0x2df/0x320
    alloc_slab_page+0x195/0x310
    allocate_slab+0x3c5/0x440
    ___slab_alloc+0x40c/0x5f0
    __slab_alloc+0x1c/0x30
    kmem_cache_alloc+0x20e/0x220
    xas_nomem+0x28/0x70
    add_to_swap_cache+0x321/0x400
    __read_swap_cache_async+0x105/0x240
    swap_cluster_readahead+0x22c/0x2e0
    shmem_swapin+0x8e/0xc0
    shmem_swapin_page+0x196/0x740
    shmem_getpage_gfp+0x3a2/0xa60
    shmem_read_mapping_page_gfp+0x32/0x60
    shmem_get_pages+0x155/0x5e0 [i915]
    __i915_gem_object_get_pages+0x68/0xa0 [i915]
    i915_vma_pin+0x3fe/0x6c0 [i915]
    eb_add_vma+0x10b/0x2c0 [i915]
    i915_gem_do_execbuffer+0x704/0x3430 [i915]
    i915_gem_execbuffer2_ioctl+0x1ea/0x3e0 [i915]
    drm_ioctl_kernel+0x86/0xd0 [drm]
    drm_ioctl+0x206/0x390 [drm]
    ksys_ioctl+0x82/0xc0
    __x64_sys_ioctl+0x16/0x20
    do_syscall_64+0x5b/0xf0
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported on 5.7, but it goes back really to 3.1: when
shmem_read_mapping_page_gfp() was implemented for use by i915, and
allowed for __GFP_NORETRY and __GFP_NOWARN flags in most places, but
missed swapin's "& GFP_KERNEL" mask for page tree node allocation in
__read_swap_cache_async() - that was to mask off HIGHUSER_MOVABLE bits
from what page cache uses, but GFP_RECLAIM_MASK is now what's needed.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=208085
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2006151330070.11064@eggly.anvils
Fixes: 68da9f055755 ("tmpfs: pass gfp to shmem_getpage_gfp")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Chris Murphy <lists@colorremedies.com>
Analyzed-by: Vlastimil Babka <vbabka@suse.cz>
Analyzed-by: Matthew Wilcox <willy@infradead.org>
Tested-by: Chris Murphy <lists@colorremedies.com>
Cc: <stable@vger.kernel.org>	[3.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/swap_state.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/mm/swap_state.c b/mm/swap_state.c
index 8e7ce9a9bc5eb..4ce014dc4571a 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -23,6 +23,7 @@
 #include <linux/huge_mm.h>
 
 #include <asm/pgtable.h>
+#include "internal.h"
 
 /*
  * swapper_space is a fiction, retained to simplify the path through
@@ -418,7 +419,8 @@ struct page *__read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask,
 		/* May fail (-ENOMEM) if XArray node allocation failed. */
 		__SetPageLocked(new_page);
 		__SetPageSwapBacked(new_page);
-		err = add_to_swap_cache(new_page, entry, gfp_mask & GFP_KERNEL);
+		err = add_to_swap_cache(new_page, entry,
+					gfp_mask & GFP_RECLAIM_MASK);
 		if (likely(!err)) {
 			/* Initiate read into locked page */
 			SetPageWorkingset(new_page);
-- 
2.25.1

[PATCH 5.4 03/65] EDAC/amd64: Read back the scrub rate PCI register on F15h

[Greg Kroah-Hartman]

From: Borislav Petkov <bp@suse.de>

[ Upstream commit ee470bb25d0dcdf126f586ec0ae6dca66cb340a4 ]

Commit:

  da92110dfdfa ("EDAC, amd64_edac: Extend scrub rate support to F15hM60h")

added support for F15h, model 0x60 CPUs but in doing so, missed to read
back SCRCTRL PCI config register on F15h CPUs which are *not* model
0x60. Add that read so that doing

  $ cat /sys/devices/system/edac/mc/mc0/sdram_scrub_rate

can show the previously set DRAM scrub rate.

Fixes: da92110dfdfa ("EDAC, amd64_edac: Extend scrub rate support to F15hM60h")
Reported-by: Anders Andersson <pipatron@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org> #v4.4..
Link: https://lkml.kernel.org/r/CAKkunMbNWppx_i6xSdDHLseA2QQmGJqj_crY=NF-GZML5np4Vw@mail.gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/amd64_edac.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index ad7d2bce91cd8..125a44d5a69e3 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -265,6 +265,8 @@ static int get_scrub_rate(struct mem_ctl_info *mci)
 
 		if (pvt->model == 0x60)
 			amd64_read_pci_cfg(pvt->F2, F15H_M60H_SCRCTRL, &scrubval);
+		else
+			amd64_read_pci_cfg(pvt->F3, SCRCTRL, &scrubval);
 		break;
 
 	case 0x17:
-- 
2.25.1

[PATCH 5.4 04/65] usbnet: smsc95xx: Fix use-after-free after removal

[Greg Kroah-Hartman]

From: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>

[ Upstream commit b835a71ef64a61383c414d6bf2896d2c0161deca ]

Syzbot reports an use-after-free in workqueue context:

BUG: KASAN: use-after-free in mutex_unlock+0x19/0x40 kernel/locking/mutex.c:737
 mutex_unlock+0x19/0x40 kernel/locking/mutex.c:737
 __smsc95xx_mdio_read drivers/net/usb/smsc95xx.c:217 [inline]
 smsc95xx_mdio_read+0x583/0x870 drivers/net/usb/smsc95xx.c:278
 check_carrier+0xd1/0x2e0 drivers/net/usb/smsc95xx.c:644
 process_one_work+0x777/0xf90 kernel/workqueue.c:2274
 worker_thread+0xa8f/0x1430 kernel/workqueue.c:2420
 kthread+0x2df/0x300 kernel/kthread.c:255

It looks like that smsc95xx_unbind() is freeing the structures that are
still in use by the concurrently running workqueue callback. Thus switch
to using cancel_delayed_work_sync() to ensure the work callback really
is no longer active.

Reported-by: syzbot+29dc7d4ae19b703ff947@syzkaller.appspotmail.com
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/smsc95xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 355be77f42418..3cf4dc3433f91 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -1324,7 +1324,7 @@ static void smsc95xx_unbind(struct usbnet *dev, struct usb_interface *intf)
 	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
 
 	if (pdata) {
-		cancel_delayed_work(&pdata->carrier_check);
+		cancel_delayed_work_sync(&pdata->carrier_check);
 		netif_dbg(dev, ifdown, dev->net, "free pdata\n");
 		kfree(pdata);
 		pdata = NULL;
-- 
2.25.1

[PATCH 5.4 05/65] sched/debug: Make sd->flags sysctl read-only

[Greg Kroah-Hartman]

From: Valentin Schneider <valentin.schneider@arm.com>

[ Upstream commit 9818427c6270a9ce8c52c8621026fe9cebae0f92 ]

Writing to the sysctl of a sched_domain->flags directly updates the value of
the field, and goes nowhere near update_top_cache_domain(). This means that
the cached domain pointers can end up containing stale data (e.g. the
domain pointed to doesn't have the relevant flag set anymore).

Explicit domain walks that check for flags will be affected by
the write, but this won't be in sync with the cached pointers which will
still point to the domains that were cached at the last sched_domain
build.

In other words, writing to this interface is playing a dangerous game. It
could be made to trigger an update of the cached sched_domain pointers when
written to, but this does not seem to be worth the trouble. Make it
read-only.

Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200415210512.805-3-valentin.schneider@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/debug.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sched/debug.c b/kernel/sched/debug.c
index f7e4579e746c5..c4b702fe1d738 100644
--- a/kernel/sched/debug.c
+++ b/kernel/sched/debug.c
@@ -258,7 +258,7 @@ sd_alloc_ctl_domain_table(struct sched_domain *sd)
 	set_table_entry(&table[2], "busy_factor",	  &sd->busy_factor,	    sizeof(int),  0644, proc_dointvec_minmax);
 	set_table_entry(&table[3], "imbalance_pct",	  &sd->imbalance_pct,	    sizeof(int),  0644, proc_dointvec_minmax);
 	set_table_entry(&table[4], "cache_nice_tries",	  &sd->cache_nice_tries,    sizeof(int),  0644, proc_dointvec_minmax);
-	set_table_entry(&table[5], "flags",		  &sd->flags,		    sizeof(int),  0644, proc_dointvec_minmax);
+	set_table_entry(&table[5], "flags",		  &sd->flags,		    sizeof(int),  0444, proc_dointvec_minmax);
 	set_table_entry(&table[6], "max_newidle_lb_cost", &sd->max_newidle_lb_cost, sizeof(long), 0644, proc_doulongvec_minmax);
 	set_table_entry(&table[7], "name",		  sd->name,	       CORENAME_MAX_SIZE, 0444, proc_dostring);
 	/* &table[8] is terminator */
-- 
2.25.1

[PATCH 5.4 06/65] mm/slub.c: fix corrupted freechain in deactivate_slab()

[Greg Kroah-Hartman]

From: Dongli Zhang <dongli.zhang@oracle.com>

[ Upstream commit 52f23478081ae0dcdb95d1650ea1e7d52d586829 ]

The slub_debug is able to fix the corrupted slab freelist/page.
However, alloc_debug_processing() only checks the validity of current
and next freepointer during allocation path.  As a result, once some
objects have their freepointers corrupted, deactivate_slab() may lead to
page fault.

Below is from a test kernel module when 'slub_debug=PUF,kmalloc-128
slub_nomerge'.  The test kernel corrupts the freepointer of one free
object on purpose.  Unfortunately, deactivate_slab() does not detect it
when iterating the freechain.

  BUG: unable to handle page fault for address: 00000000123456f8
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP PTI
  ... ...
  RIP: 0010:deactivate_slab.isra.92+0xed/0x490
  ... ...
  Call Trace:
   ___slab_alloc+0x536/0x570
   __slab_alloc+0x17/0x30
   __kmalloc+0x1d9/0x200
   ext4_htree_store_dirent+0x30/0xf0
   htree_dirblock_to_tree+0xcb/0x1c0
   ext4_htree_fill_tree+0x1bc/0x2d0
   ext4_readdir+0x54f/0x920
   iterate_dir+0x88/0x190
   __x64_sys_getdents+0xa6/0x140
   do_syscall_64+0x49/0x170
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

Therefore, this patch adds extra consistency check in deactivate_slab().
Once an object's freepointer is corrupted, all following objects
starting at this object are isolated.

[akpm@linux-foundation.org: fix build with CONFIG_SLAB_DEBUG=n]
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/20200331031450.12182-1-dongli.zhang@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/slub.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/mm/slub.c b/mm/slub.c
index fca33abd6c428..5c05a36bb746f 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -644,6 +644,20 @@ static void slab_fix(struct kmem_cache *s, char *fmt, ...)
 	va_end(args);
 }
 
+static bool freelist_corrupted(struct kmem_cache *s, struct page *page,
+			       void *freelist, void *nextfree)
+{
+	if ((s->flags & SLAB_CONSISTENCY_CHECKS) &&
+	    !check_valid_pointer(s, page, nextfree)) {
+		object_err(s, page, freelist, "Freechain corrupt");
+		freelist = NULL;
+		slab_fix(s, "Isolate corrupted freechain");
+		return true;
+	}
+
+	return false;
+}
+
 static void print_trailer(struct kmem_cache *s, struct page *page, u8 *p)
 {
 	unsigned int off;	/* Offset of last byte */
@@ -1379,6 +1393,11 @@ static inline void inc_slabs_node(struct kmem_cache *s, int node,
 static inline void dec_slabs_node(struct kmem_cache *s, int node,
 							int objects) {}
 
+static bool freelist_corrupted(struct kmem_cache *s, struct page *page,
+			       void *freelist, void *nextfree)
+{
+	return false;
+}
 #endif /* CONFIG_SLUB_DEBUG */
 
 /*
@@ -2062,6 +2081,14 @@ static void deactivate_slab(struct kmem_cache *s, struct page *page,
 		void *prior;
 		unsigned long counters;
 
+		/*
+		 * If 'nextfree' is invalid, it is possible that the object at
+		 * 'freelist' is already corrupted.  So isolate all objects
+		 * starting at 'freelist'.
+		 */
+		if (freelist_corrupted(s, page, freelist, nextfree))
+			break;
+
 		do {
 			prior = page->freelist;
 			counters = page->counters;
-- 
2.25.1

[PATCH 5.4 07/65] mm/slub: fix stack overruns with SLUB_STATS

[Greg Kroah-Hartman]

From: Qian Cai <cai@lca.pw>

[ Upstream commit a68ee0573991e90af2f1785db309206408bad3e5 ]

There is no need to copy SLUB_STATS items from root memcg cache to new
memcg cache copies.  Doing so could result in stack overruns because the
store function only accepts 0 to clear the stat and returns an error for
everything else while the show method would print out the whole stat.

Then, the mismatch of the lengths returns from show and store methods
happens in memcg_propagate_slab_attrs():

	else if (root_cache->max_attr_size < ARRAY_SIZE(mbuf))
		buf = mbuf;

max_attr_size is only 2 from slab_attr_store(), then, it uses mbuf[64]
in show_stat() later where a bounch of sprintf() would overrun the stack
variable.  Fix it by always allocating a page of buffer to be used in
show_stat() if SLUB_STATS=y which should only be used for debug purpose.

  # echo 1 > /sys/kernel/slab/fs_cache/shrink
  BUG: KASAN: stack-out-of-bounds in number+0x421/0x6e0
  Write of size 1 at addr ffffc900256cfde0 by task kworker/76:0/53251

  Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019
  Workqueue: memcg_kmem_cache memcg_kmem_cache_create_func
  Call Trace:
    number+0x421/0x6e0
    vsnprintf+0x451/0x8e0
    sprintf+0x9e/0xd0
    show_stat+0x124/0x1d0
    alloc_slowpath_show+0x13/0x20
    __kmem_cache_create+0x47a/0x6b0

  addr ffffc900256cfde0 is located in stack of task kworker/76:0/53251 at offset 0 in frame:
   process_one_work+0x0/0xb90

  this frame has 1 object:
   [32, 72) 'lockdep_map'

  Memory state around the buggy address:
   ffffc900256cfc80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   ffffc900256cfd00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  >ffffc900256cfd80: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
                                                         ^
   ffffc900256cfe00: 00 00 00 00 00 f2 f2 f2 00 00 00 00 00 00 00 00
   ffffc900256cfe80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  ==================================================================
  Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: __kmem_cache_create+0x6ac/0x6b0
  Workqueue: memcg_kmem_cache memcg_kmem_cache_create_func
  Call Trace:
    __kmem_cache_create+0x6ac/0x6b0

Fixes: 107dab5c92d5 ("slub: slub-specific propagation changes")
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Glauber Costa <glauber@scylladb.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/20200429222356.4322-1-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/slub.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/mm/slub.c b/mm/slub.c
index 5c05a36bb746f..709e31002504c 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -5648,7 +5648,8 @@ static void memcg_propagate_slab_attrs(struct kmem_cache *s)
 		 */
 		if (buffer)
 			buf = buffer;
-		else if (root_cache->max_attr_size < ARRAY_SIZE(mbuf))
+		else if (root_cache->max_attr_size < ARRAY_SIZE(mbuf) &&
+			 !IS_ENABLED(CONFIG_SLUB_STATS))
 			buf = mbuf;
 		else {
 			buffer = (char *) get_zeroed_page(GFP_KERNEL);
-- 
2.25.1

[PATCH 5.4 08/65] rxrpc: Fix race between incoming ACK parser and retransmitter

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 2ad6691d988c0c611362ddc2aad89e0fb50e3261 ]

There's a race between the retransmission code and the received ACK parser.
The problem is that the retransmission loop has to drop the lock under
which it is iterating through the transmission buffer in order to transmit
a packet, but whilst the lock is dropped, the ACK parser can crank the Tx
window round and discard the packets from the buffer.

The retransmission code then updated the annotations for the wrong packet
and a later retransmission thought it had to retransmit a packet that
wasn't there, leading to a NULL pointer dereference.

Fix this by:

 (1) Moving the annotation change to before we drop the lock prior to
     transmission.  This means we can't vary the annotation depending on
     the outcome of the transmission, but that's fine - we'll retransmit
     again later if it failed now.

 (2) Skipping the packet if the skb pointer is NULL.

The following oops was seen:

	BUG: kernel NULL pointer dereference, address: 000000000000002d
	Workqueue: krxrpcd rxrpc_process_call
	RIP: 0010:rxrpc_get_skb+0x14/0x8a
	...
	Call Trace:
	 rxrpc_resend+0x331/0x41e
	 ? get_vtime_delta+0x13/0x20
	 rxrpc_process_call+0x3c0/0x4ac
	 process_one_work+0x18f/0x27f
	 worker_thread+0x1a3/0x247
	 ? create_worker+0x17d/0x17d
	 kthread+0xe6/0xeb
	 ? kthread_delayed_work_timer_fn+0x83/0x83
	 ret_from_fork+0x1f/0x30

Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rxrpc/call_event.c | 29 +++++++++++------------------
 1 file changed, 11 insertions(+), 18 deletions(-)

diff --git a/net/rxrpc/call_event.c b/net/rxrpc/call_event.c
index 2a65ac41055f5..985fb89202d0c 100644
--- a/net/rxrpc/call_event.c
+++ b/net/rxrpc/call_event.c
@@ -248,7 +248,18 @@ static void rxrpc_resend(struct rxrpc_call *call, unsigned long now_j)
 		if (anno_type != RXRPC_TX_ANNO_RETRANS)
 			continue;
 
+		/* We need to reset the retransmission state, but we need to do
+		 * so before we drop the lock as a new ACK/NAK may come in and
+		 * confuse things
+		 */
+		annotation &= ~RXRPC_TX_ANNO_MASK;
+		annotation |= RXRPC_TX_ANNO_RESENT;
+		call->rxtx_annotations[ix] = annotation;
+
 		skb = call->rxtx_buffer[ix];
+		if (!skb)
+			continue;
+
 		rxrpc_get_skb(skb, rxrpc_skb_got);
 		spin_unlock_bh(&call->lock);
 
@@ -262,24 +273,6 @@ static void rxrpc_resend(struct rxrpc_call *call, unsigned long now_j)
 
 		rxrpc_free_skb(skb, rxrpc_skb_freed);
 		spin_lock_bh(&call->lock);
-
-		/* We need to clear the retransmit state, but there are two
-		 * things we need to be aware of: A new ACK/NAK might have been
-		 * received and the packet might have been hard-ACK'd (in which
-		 * case it will no longer be in the buffer).
-		 */
-		if (after(seq, call->tx_hard_ack)) {
-			annotation = call->rxtx_annotations[ix];
-			anno_type = annotation & RXRPC_TX_ANNO_MASK;
-			if (anno_type == RXRPC_TX_ANNO_RETRANS ||
-			    anno_type == RXRPC_TX_ANNO_NAK) {
-				annotation &= ~RXRPC_TX_ANNO_MASK;
-				annotation |= RXRPC_TX_ANNO_UNACK;
-			}
-			annotation |= RXRPC_TX_ANNO_RESENT;
-			call->rxtx_annotations[ix] = annotation;
-		}
-
 		if (after(call->tx_hard_ack, seq))
 			seq = call->tx_hard_ack;
 	}
-- 
2.25.1

[PATCH 5.4 09/65] usb: usbtest: fix missing kfree(dev->buf) in usbtest_disconnect

[Greg Kroah-Hartman]

From: Zqiang <qiang.zhang@windriver.com>

[ Upstream commit 28ebeb8db77035e058a510ce9bd17c2b9a009dba ]

BUG: memory leak
unreferenced object 0xffff888055046e00 (size 256):
  comm "kworker/2:9", pid 2570, jiffies 4294942129 (age 1095.500s)
  hex dump (first 32 bytes):
    00 70 04 55 80 88 ff ff 18 bb 5a 81 ff ff ff ff  .p.U......Z.....
    f5 96 78 81 ff ff ff ff 37 de 8e 81 ff ff ff ff  ..x.....7.......
  backtrace:
    [<00000000d121dccf>] kmemleak_alloc_recursive
include/linux/kmemleak.h:43 [inline]
    [<00000000d121dccf>] slab_post_alloc_hook mm/slab.h:586 [inline]
    [<00000000d121dccf>] slab_alloc_node mm/slub.c:2786 [inline]
    [<00000000d121dccf>] slab_alloc mm/slub.c:2794 [inline]
    [<00000000d121dccf>] kmem_cache_alloc_trace+0x15e/0x2d0 mm/slub.c:2811
    [<000000005c3c3381>] kmalloc include/linux/slab.h:555 [inline]
    [<000000005c3c3381>] usbtest_probe+0x286/0x19d0
drivers/usb/misc/usbtest.c:2790
    [<000000001cec6910>] usb_probe_interface+0x2bd/0x870
drivers/usb/core/driver.c:361
    [<000000007806c118>] really_probe+0x48d/0x8f0 drivers/base/dd.c:551
    [<00000000a3308c3e>] driver_probe_device+0xfc/0x2a0 drivers/base/dd.c:724
    [<000000003ef66004>] __device_attach_driver+0x1b6/0x240
drivers/base/dd.c:831
    [<00000000eee53e97>] bus_for_each_drv+0x14e/0x1e0 drivers/base/bus.c:431
    [<00000000bb0648d0>] __device_attach+0x1f9/0x350 drivers/base/dd.c:897
    [<00000000838b324a>] device_initial_probe+0x1a/0x20 drivers/base/dd.c:944
    [<0000000030d501c1>] bus_probe_device+0x1e1/0x280 drivers/base/bus.c:491
    [<000000005bd7adef>] device_add+0x131d/0x1c40 drivers/base/core.c:2504
    [<00000000a0937814>] usb_set_configuration+0xe84/0x1ab0
drivers/usb/core/message.c:2030
    [<00000000e3934741>] generic_probe+0x6a/0xe0 drivers/usb/core/generic.c:210
    [<0000000098ade0f1>] usb_probe_device+0x90/0xd0
drivers/usb/core/driver.c:266
    [<000000007806c118>] really_probe+0x48d/0x8f0 drivers/base/dd.c:551
    [<00000000a3308c3e>] driver_probe_device+0xfc/0x2a0 drivers/base/dd.c:724

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Kyungtae Kim <kt0755@gmail.com>
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Link: https://lore.kernel.org/r/20200612035210.20494-1-qiang.zhang@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/misc/usbtest.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 98ada1a3425c6..bae88893ee8e3 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -2873,6 +2873,7 @@ static void usbtest_disconnect(struct usb_interface *intf)
 
 	usb_set_intfdata(intf, NULL);
 	dev_dbg(&intf->dev, "disconnect\n");
+	kfree(dev->buf);
 	kfree(dev);
 }
 
-- 
2.25.1

[PATCH 5.4 10/65] tools lib traceevent: Add append() function helper for appending strings

[Greg Kroah-Hartman]

From: Steven Rostedt (VMware) <rostedt@goodmis.org>

[ Upstream commit 27d4d336f2872193e90ee5450559e1699fae0f6d ]

There's several locations that open code realloc and strcat() to append
text to strings. Add an append() function that takes a delimiter and a
string to append to another string.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jaewon Lim <jaewon31.kim@samsung.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: linux-mm@kvack.org
Cc: linux-trace-devel@vger.kernel.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lore.kernel.org/lkml/20200324200956.515118403@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/traceevent/event-parse.c | 98 ++++++++++++------------------
 1 file changed, 40 insertions(+), 58 deletions(-)

diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c
index d948475585ced..4bc3e1b906652 100644
--- a/tools/lib/traceevent/event-parse.c
+++ b/tools/lib/traceevent/event-parse.c
@@ -1425,6 +1425,19 @@ static unsigned int type_size(const char *name)
 	return 0;
 }
 
+static int append(char **buf, const char *delim, const char *str)
+{
+	char *new_buf;
+
+	new_buf = realloc(*buf, strlen(*buf) + strlen(delim) + strlen(str) + 1);
+	if (!new_buf)
+		return -1;
+	strcat(new_buf, delim);
+	strcat(new_buf, str);
+	*buf = new_buf;
+	return 0;
+}
+
 static int event_read_fields(struct tep_event *event, struct tep_format_field **fields)
 {
 	struct tep_format_field *field = NULL;
@@ -1432,6 +1445,7 @@ static int event_read_fields(struct tep_event *event, struct tep_format_field **
 	char *token;
 	char *last_token;
 	int count = 0;
+	int ret;
 
 	do {
 		unsigned int size_dynamic = 0;
@@ -1490,24 +1504,15 @@ static int event_read_fields(struct tep_event *event, struct tep_format_field **
 					field->flags |= TEP_FIELD_IS_POINTER;
 
 				if (field->type) {
-					char *new_type;
-					new_type = realloc(field->type,
-							   strlen(field->type) +
-							   strlen(last_token) + 2);
-					if (!new_type) {
-						free(last_token);
-						goto fail;
-					}
-					field->type = new_type;
-					strcat(field->type, " ");
-					strcat(field->type, last_token);
+					ret = append(&field->type, " ", last_token);
 					free(last_token);
+					if (ret < 0)
+						goto fail;
 				} else
 					field->type = last_token;
 				last_token = token;
 				continue;
 			}
-
 			break;
 		}
 
@@ -1523,8 +1528,6 @@ static int event_read_fields(struct tep_event *event, struct tep_format_field **
 		if (strcmp(token, "[") == 0) {
 			enum tep_event_type last_type = type;
 			char *brackets = token;
-			char *new_brackets;
-			int len;
 
 			field->flags |= TEP_FIELD_IS_ARRAY;
 
@@ -1536,29 +1539,27 @@ static int event_read_fields(struct tep_event *event, struct tep_format_field **
 				field->arraylen = 0;
 
 		        while (strcmp(token, "]") != 0) {
+				const char *delim;
+
 				if (last_type == TEP_EVENT_ITEM &&
 				    type == TEP_EVENT_ITEM)
-					len = 2;
+					delim = " ";
 				else
-					len = 1;
+					delim = "";
+
 				last_type = type;
 
-				new_brackets = realloc(brackets,
-						       strlen(brackets) +
-						       strlen(token) + len);
-				if (!new_brackets) {
+				ret = append(&brackets, delim, token);
+				if (ret < 0) {
 					free(brackets);
 					goto fail;
 				}
-				brackets = new_brackets;
-				if (len == 2)
-					strcat(brackets, " ");
-				strcat(brackets, token);
 				/* We only care about the last token */
 				field->arraylen = strtoul(token, NULL, 0);
 				free_token(token);
 				type = read_token(&token);
 				if (type == TEP_EVENT_NONE) {
+					free(brackets);
 					do_warning_event(event, "failed to find token");
 					goto fail;
 				}
@@ -1566,13 +1567,11 @@ static int event_read_fields(struct tep_event *event, struct tep_format_field **
 
 			free_token(token);
 
-			new_brackets = realloc(brackets, strlen(brackets) + 2);
-			if (!new_brackets) {
+			ret = append(&brackets, "", "]");
+			if (ret < 0) {
 				free(brackets);
 				goto fail;
 			}
-			brackets = new_brackets;
-			strcat(brackets, "]");
 
 			/* add brackets to type */
 
@@ -1582,34 +1581,23 @@ static int event_read_fields(struct tep_event *event, struct tep_format_field **
 			 * the format: type [] item;
 			 */
 			if (type == TEP_EVENT_ITEM) {
-				char *new_type;
-				new_type = realloc(field->type,
-						   strlen(field->type) +
-						   strlen(field->name) +
-						   strlen(brackets) + 2);
-				if (!new_type) {
+				ret = append(&field->type, " ", field->name);
+				if (ret < 0) {
 					free(brackets);
 					goto fail;
 				}
-				field->type = new_type;
-				strcat(field->type, " ");
-				strcat(field->type, field->name);
+				ret = append(&field->type, "", brackets);
+
 				size_dynamic = type_size(field->name);
 				free_token(field->name);
-				strcat(field->type, brackets);
 				field->name = field->alias = token;
 				type = read_token(&token);
 			} else {
-				char *new_type;
-				new_type = realloc(field->type,
-						   strlen(field->type) +
-						   strlen(brackets) + 1);
-				if (!new_type) {
+				ret = append(&field->type, "", brackets);
+				if (ret < 0) {
 					free(brackets);
 					goto fail;
 				}
-				field->type = new_type;
-				strcat(field->type, brackets);
 			}
 			free(brackets);
 		}
@@ -2046,19 +2034,16 @@ process_op(struct tep_event *event, struct tep_print_arg *arg, char **tok)
 		/* could just be a type pointer */
 		if ((strcmp(arg->op.op, "*") == 0) &&
 		    type == TEP_EVENT_DELIM && (strcmp(token, ")") == 0)) {
-			char *new_atom;
+			int ret;
 
 			if (left->type != TEP_PRINT_ATOM) {
 				do_warning_event(event, "bad pointer type");
 				goto out_free;
 			}
-			new_atom = realloc(left->atom.atom,
-					    strlen(left->atom.atom) + 3);
-			if (!new_atom)
+			ret = append(&left->atom.atom, " ", "*");
+			if (ret < 0)
 				goto out_warn_free;
 
-			left->atom.atom = new_atom;
-			strcat(left->atom.atom, " *");
 			free(arg->op.op);
 			*arg = *left;
 			free(left);
@@ -3151,18 +3136,15 @@ process_arg_token(struct tep_event *event, struct tep_print_arg *arg,
 		}
 		/* atoms can be more than one token long */
 		while (type == TEP_EVENT_ITEM) {
-			char *new_atom;
-			new_atom = realloc(atom,
-					   strlen(atom) + strlen(token) + 2);
-			if (!new_atom) {
+			int ret;
+
+			ret = append(&atom, " ", token);
+			if (ret < 0) {
 				free(atom);
 				*tok = NULL;
 				free_token(token);
 				return TEP_EVENT_ERROR;
 			}
-			atom = new_atom;
-			strcat(atom, " ");
-			strcat(atom, token);
 			free_token(token);
 			type = read_token_item(&token);
 		}
-- 
2.25.1

[PATCH 5.4 11/65] tools lib traceevent: Handle __attribute__((user)) in field names

[Greg Kroah-Hartman]

From: Steven Rostedt (VMware) <rostedt@goodmis.org>

[ Upstream commit 74621d929d944529a5e2878a84f48bfa6fb69a66 ]

Commit c61f13eaa1ee1 ("gcc-plugins: Add structleak for more stack
initialization") added "__attribute__((user))" to the user when
stackleak detector is enabled. This now appears in the field format of
system call trace events for system calls that have user buffers. The
"__attribute__((user))" breaks the parsing in libtraceevent. That needs
to be handled.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jaewon Kim <jaewon31.kim@samsung.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: linux-mm@kvack.org
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200324200956.663647256@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/traceevent/event-parse.c | 39 +++++++++++++++++++++++++++++-
 1 file changed, 38 insertions(+), 1 deletion(-)

diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c
index 4bc3e1b906652..798284f511f16 100644
--- a/tools/lib/traceevent/event-parse.c
+++ b/tools/lib/traceevent/event-parse.c
@@ -1444,6 +1444,7 @@ static int event_read_fields(struct tep_event *event, struct tep_format_field **
 	enum tep_event_type type;
 	char *token;
 	char *last_token;
+	char *delim = " ";
 	int count = 0;
 	int ret;
 
@@ -1504,13 +1505,49 @@ static int event_read_fields(struct tep_event *event, struct tep_format_field **
 					field->flags |= TEP_FIELD_IS_POINTER;
 
 				if (field->type) {
-					ret = append(&field->type, " ", last_token);
+					ret = append(&field->type, delim, last_token);
 					free(last_token);
 					if (ret < 0)
 						goto fail;
 				} else
 					field->type = last_token;
 				last_token = token;
+				delim = " ";
+				continue;
+			}
+
+			/* Handle __attribute__((user)) */
+			if ((type == TEP_EVENT_DELIM) &&
+			    strcmp("__attribute__", last_token) == 0 &&
+			    token[0] == '(') {
+				int depth = 1;
+				int ret;
+
+				ret = append(&field->type, " ", last_token);
+				ret |= append(&field->type, "", "(");
+				if (ret < 0)
+					goto fail;
+
+				delim = " ";
+				while ((type = read_token(&token)) != TEP_EVENT_NONE) {
+					if (type == TEP_EVENT_DELIM) {
+						if (token[0] == '(')
+							depth++;
+						else if (token[0] == ')')
+							depth--;
+						if (!depth)
+							break;
+						ret = append(&field->type, "", token);
+						delim = "";
+					} else {
+						ret = append(&field->type, delim, token);
+						delim = " ";
+					}
+					if (ret < 0)
+						goto fail;
+					free(last_token);
+					last_token = token;
+				}
 				continue;
 			}
 			break;
-- 
2.25.1

[PATCH 5.4 12/65] s390/debug: avoid kernel warning on too large number of pages

[Greg Kroah-Hartman]

From: Christian Borntraeger <borntraeger@de.ibm.com>

[ Upstream commit 827c4913923e0b441ba07ba4cc41e01181102303 ]

When specifying insanely large debug buffers a kernel warning is
printed. The debug code does handle the error gracefully, though.
Instead of duplicating the check let us silence the warning to
avoid crashes when panic_on_warn is used.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/debug.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index 6d321f5f101d6..7184d55d87aae 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -198,9 +198,10 @@ static debug_entry_t ***debug_areas_alloc(int pages_per_area, int nr_areas)
 	if (!areas)
 		goto fail_malloc_areas;
 	for (i = 0; i < nr_areas; i++) {
+		/* GFP_NOWARN to avoid user triggerable WARN, we handle fails */
 		areas[i] = kmalloc_array(pages_per_area,
 					 sizeof(debug_entry_t *),
-					 GFP_KERNEL);
+					 GFP_KERNEL | __GFP_NOWARN);
 		if (!areas[i])
 			goto fail_malloc_areas2;
 		for (j = 0; j < pages_per_area; j++) {
-- 
2.25.1

[PATCH 5.4 13/65] nvme-multipath: set bdi capabilities once

[Greg Kroah-Hartman]

From: Keith Busch <kbusch@kernel.org>

[ Upstream commit b2ce4d90690bd29ce5b554e203cd03682dd59697 ]

The queues' backing device info capabilities don't change with each
namespace revalidation. Set it only when each path's request_queue
is initially added to a multipath queue.

Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/multipath.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 772eb05e57afe..7cc0ec180d555 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -3,6 +3,7 @@
  * Copyright (c) 2017-2018 Christoph Hellwig.
  */
 
+#include <linux/backing-dev.h>
 #include <linux/moduleparam.h>
 #include <trace/events/block.h>
 #include "nvme.h"
@@ -662,6 +663,13 @@ void nvme_mpath_add_disk(struct nvme_ns *ns, struct nvme_id_ns *id)
 		ns->ana_state = NVME_ANA_OPTIMIZED; 
 		nvme_mpath_set_live(ns);
 	}
+
+	if (bdi_cap_stable_pages_required(ns->queue->backing_dev_info)) {
+		struct backing_dev_info *info =
+					ns->head->disk->queue->backing_dev_info;
+
+		info->capabilities |= BDI_CAP_STABLE_WRITES;
+	}
 }
 
 void nvme_mpath_remove_disk(struct nvme_ns_head *head)
-- 
2.25.1

[PATCH 5.4 14/65] nvme: fix possible deadlock when I/O is blocked

[Greg Kroah-Hartman]

From: Sagi Grimberg <sagi@grimberg.me>

[ Upstream commit 3b4b19721ec652ad2c4fe51dfbe5124212b5f581 ]

Revert fab7772bfbcf ("nvme-multipath: revalidate nvme_ns_head gendisk
in nvme_validate_ns")

When adding a new namespace to the head disk (via nvme_mpath_set_live)
we will see partition scan which triggers I/O on the mpath device node.
This process will usually be triggered from the scan_work which holds
the scan_lock. If I/O blocks (if we got ana change currently have only
available paths but none are accessible) this can deadlock on the head
disk bd_mutex as both partition scan I/O takes it, and head disk revalidation
takes it to check for resize (also triggered from scan_work on a different
path). See trace [1].

The mpath disk revalidation was originally added to detect online disk
size change, but this is no longer needed since commit cb224c3af4df
("nvme: Convert to use set_capacity_revalidate_and_notify") which already
updates resize info without unnecessarily revalidating the disk (the
mpath disk doesn't even implement .revalidate_disk fop).

[1]:
--
kernel: INFO: task kworker/u65:9:494 blocked for more than 241 seconds.
kernel:       Tainted: G           OE     5.3.5-050305-generic #201910071830
kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: kworker/u65:9   D    0   494      2 0x80004000
kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core]
kernel: Call Trace:
kernel:  __schedule+0x2b9/0x6c0
kernel:  schedule+0x42/0xb0
kernel:  schedule_preempt_disabled+0xe/0x10
kernel:  __mutex_lock.isra.0+0x182/0x4f0
kernel:  __mutex_lock_slowpath+0x13/0x20
kernel:  mutex_lock+0x2e/0x40
kernel:  revalidate_disk+0x63/0xa0
kernel:  __nvme_revalidate_disk+0xfe/0x110 [nvme_core]
kernel:  nvme_revalidate_disk+0xa4/0x160 [nvme_core]
kernel:  ? evict+0x14c/0x1b0
kernel:  revalidate_disk+0x2b/0xa0
kernel:  nvme_validate_ns+0x49/0x940 [nvme_core]
kernel:  ? blk_mq_free_request+0xd2/0x100
kernel:  ? __nvme_submit_sync_cmd+0xbe/0x1e0 [nvme_core]
kernel:  nvme_scan_work+0x24f/0x380 [nvme_core]
kernel:  process_one_work+0x1db/0x380
kernel:  worker_thread+0x249/0x400
kernel:  kthread+0x104/0x140
kernel:  ? process_one_work+0x380/0x380
kernel:  ? kthread_park+0x80/0x80
kernel:  ret_from_fork+0x1f/0x40
...
kernel: INFO: task kworker/u65:1:2630 blocked for more than 241 seconds.
kernel:       Tainted: G           OE     5.3.5-050305-generic #201910071830
kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: kworker/u65:1   D    0  2630      2 0x80004000
kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core]
kernel: Call Trace:
kernel:  __schedule+0x2b9/0x6c0
kernel:  schedule+0x42/0xb0
kernel:  io_schedule+0x16/0x40
kernel:  do_read_cache_page+0x438/0x830
kernel:  ? __switch_to_asm+0x34/0x70
kernel:  ? file_fdatawait_range+0x30/0x30
kernel:  read_cache_page+0x12/0x20
kernel:  read_dev_sector+0x27/0xc0
kernel:  read_lba+0xc1/0x220
kernel:  ? kmem_cache_alloc_trace+0x19c/0x230
kernel:  efi_partition+0x1e6/0x708
kernel:  ? vsnprintf+0x39e/0x4e0
kernel:  ? snprintf+0x49/0x60
kernel:  check_partition+0x154/0x244
kernel:  rescan_partitions+0xae/0x280
kernel:  __blkdev_get+0x40f/0x560
kernel:  blkdev_get+0x3d/0x140
kernel:  __device_add_disk+0x388/0x480
kernel:  device_add_disk+0x13/0x20
kernel:  nvme_mpath_set_live+0x119/0x140 [nvme_core]
kernel:  nvme_update_ns_ana_state+0x5c/0x60 [nvme_core]
kernel:  nvme_set_ns_ana_state+0x1e/0x30 [nvme_core]
kernel:  nvme_parse_ana_log+0xa1/0x180 [nvme_core]
kernel:  ? nvme_update_ns_ana_state+0x60/0x60 [nvme_core]
kernel:  nvme_mpath_add_disk+0x47/0x90 [nvme_core]
kernel:  nvme_validate_ns+0x396/0x940 [nvme_core]
kernel:  ? blk_mq_free_request+0xd2/0x100
kernel:  nvme_scan_work+0x24f/0x380 [nvme_core]
kernel:  process_one_work+0x1db/0x380
kernel:  worker_thread+0x249/0x400
kernel:  kthread+0x104/0x140
kernel:  ? process_one_work+0x380/0x380
kernel:  ? kthread_park+0x80/0x80
kernel:  ret_from_fork+0x1f/0x40
--

Fixes: fab7772bfbcf ("nvme-multipath: revalidate nvme_ns_head gendisk
in nvme_validate_ns")
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index d4b388793f40d..c44c00b9e1d85 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -1870,7 +1870,6 @@ static void __nvme_revalidate_disk(struct gendisk *disk, struct nvme_id_ns *id)
 	if (ns->head->disk) {
 		nvme_update_disk_info(ns->head->disk, ns, id);
 		blk_queue_stack_limits(ns->head->disk->queue, ns->queue);
-		revalidate_disk(ns->head->disk);
 	}
 #endif
 }
-- 
2.25.1

[PATCH 5.4 15/65] nvme-multipath: fix deadlock between ana_work and scan_work

[Greg Kroah-Hartman]

From: Anton Eidelman <anton@lightbitslabs.com>

[ Upstream commit 489dd102a2c7c94d783a35f9412eb085b8da1aa4 ]

When scan_work calls nvme_mpath_add_disk() this holds ana_lock
and invokes nvme_parse_ana_log(), which may issue IO
in device_add_disk() and hang waiting for an accessible path.
While nvme_mpath_set_live() only called when nvme_state_is_live(),
a transition may cause NVME_SC_ANA_TRANSITION and requeue the IO.

In order to recover and complete the IO ana_work on the same ctrl
should be able to update the path state and remove NVME_NS_ANA_PENDING.

The deadlock occurs because scan_work keeps holding ana_lock,
so ana_work hangs [1].

Fix:
Now nvme_mpath_add_disk() uses nvme_parse_ana_log() to obtain a copy
of the ANA group desc, and then calls nvme_update_ns_ana_state() without
holding ana_lock.

[1]:
kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core]
kernel: Call Trace:
kernel:  __schedule+0x2b9/0x6c0
kernel:  schedule+0x42/0xb0
kernel:  io_schedule+0x16/0x40
kernel:  do_read_cache_page+0x438/0x830
kernel:  read_cache_page+0x12/0x20
kernel:  read_dev_sector+0x27/0xc0
kernel:  read_lba+0xc1/0x220
kernel:  efi_partition+0x1e6/0x708
kernel:  check_partition+0x154/0x244
kernel:  rescan_partitions+0xae/0x280
kernel:  __blkdev_get+0x40f/0x560
kernel:  blkdev_get+0x3d/0x140
kernel:  __device_add_disk+0x388/0x480
kernel:  device_add_disk+0x13/0x20
kernel:  nvme_mpath_set_live+0x119/0x140 [nvme_core]
kernel:  nvme_update_ns_ana_state+0x5c/0x60 [nvme_core]
kernel:  nvme_set_ns_ana_state+0x1e/0x30 [nvme_core]
kernel:  nvme_parse_ana_log+0xa1/0x180 [nvme_core]
kernel:  nvme_mpath_add_disk+0x47/0x90 [nvme_core]
kernel:  nvme_validate_ns+0x396/0x940 [nvme_core]
kernel:  nvme_scan_work+0x24f/0x380 [nvme_core]
kernel:  process_one_work+0x1db/0x380
kernel:  worker_thread+0x249/0x400
kernel:  kthread+0x104/0x140

kernel: Workqueue: nvme-wq nvme_ana_work [nvme_core]
kernel: Call Trace:
kernel:  __schedule+0x2b9/0x6c0
kernel:  schedule+0x42/0xb0
kernel:  schedule_preempt_disabled+0xe/0x10
kernel:  __mutex_lock.isra.0+0x182/0x4f0
kernel:  ? __switch_to_asm+0x34/0x70
kernel:  ? select_task_rq_fair+0x1aa/0x5c0
kernel:  ? kvm_sched_clock_read+0x11/0x20
kernel:  ? sched_clock+0x9/0x10
kernel:  __mutex_lock_slowpath+0x13/0x20
kernel:  mutex_lock+0x2e/0x40
kernel:  nvme_read_ana_log+0x3a/0x100 [nvme_core]
kernel:  nvme_ana_work+0x15/0x20 [nvme_core]
kernel:  process_one_work+0x1db/0x380
kernel:  worker_thread+0x4d/0x400
kernel:  kthread+0x104/0x140
kernel:  ? process_one_work+0x380/0x380
kernel:  ? kthread_park+0x80/0x80
kernel:  ret_from_fork+0x35/0x40

Fixes: 0d0b660f214d ("nvme: add ANA support")
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/multipath.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 7cc0ec180d555..18f0a05c74b56 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -639,26 +639,34 @@ static ssize_t ana_state_show(struct device *dev, struct device_attribute *attr,
 }
 DEVICE_ATTR_RO(ana_state);
 
-static int nvme_set_ns_ana_state(struct nvme_ctrl *ctrl,
+static int nvme_lookup_ana_group_desc(struct nvme_ctrl *ctrl,
 		struct nvme_ana_group_desc *desc, void *data)
 {
-	struct nvme_ns *ns = data;
+	struct nvme_ana_group_desc *dst = data;
 
-	if (ns->ana_grpid == le32_to_cpu(desc->grpid)) {
-		nvme_update_ns_ana_state(desc, ns);
-		return -ENXIO; /* just break out of the loop */
-	}
+	if (desc->grpid != dst->grpid)
+		return 0;
 
-	return 0;
+	*dst = *desc;
+	return -ENXIO; /* just break out of the loop */
 }
 
 void nvme_mpath_add_disk(struct nvme_ns *ns, struct nvme_id_ns *id)
 {
 	if (nvme_ctrl_use_ana(ns->ctrl)) {
+		struct nvme_ana_group_desc desc = {
+			.grpid = id->anagrpid,
+			.state = 0,
+		};
+
 		mutex_lock(&ns->ctrl->ana_lock);
 		ns->ana_grpid = le32_to_cpu(id->anagrpid);
-		nvme_parse_ana_log(ns->ctrl, ns, nvme_set_ns_ana_state);
+		nvme_parse_ana_log(ns->ctrl, &desc, nvme_lookup_ana_group_desc);
 		mutex_unlock(&ns->ctrl->ana_lock);
+		if (desc.state) {
+			/* found the group desc: update */
+			nvme_update_ns_ana_state(&desc, ns);
+		}
 	} else {
 		ns->ana_state = NVME_ANA_OPTIMIZED; 
 		nvme_mpath_set_live(ns);
-- 
2.25.1

[PATCH 5.4 16/65] nvme-multipath: fix deadlock due to head->lock

[Greg Kroah-Hartman]

From: Anton Eidelman <anton@lightbitslabs.com>

[ Upstream commit d8a22f85609fadb46ba699e0136cc3ebdeebff79 ]

In the following scenario scan_work and ana_work will deadlock:

When scan_work calls nvme_mpath_add_disk() this holds ana_lock
and invokes nvme_parse_ana_log(), which may issue IO
in device_add_disk() and hang waiting for an accessible path.

While nvme_mpath_set_live() only called when nvme_state_is_live(),
a transition may cause NVME_SC_ANA_TRANSITION and requeue the IO.

Since nvme_mpath_set_live() holds ns->head->lock, an ana_work on
ANY ctrl will not be able to complete nvme_mpath_set_live()
on the same ns->head, which is required in order to update
the new accessible path and remove NVME_NS_ANA_PENDING..
Therefore IO never completes: deadlock [1].

Fix:
Move device_add_disk out of the head->lock and protect it with an
atomic test_and_set for a new NVME_NS_HEAD_HAS_DISK bit.

[1]:
kernel: INFO: task kworker/u8:2:160 blocked for more than 120 seconds.
kernel:       Tainted: G           OE     5.3.5-050305-generic #201910071830
kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: kworker/u8:2    D    0   160      2 0x80004000
kernel: Workqueue: nvme-wq nvme_ana_work [nvme_core]
kernel: Call Trace:
kernel:  __schedule+0x2b9/0x6c0
kernel:  schedule+0x42/0xb0
kernel:  schedule_preempt_disabled+0xe/0x10
kernel:  __mutex_lock.isra.0+0x182/0x4f0
kernel:  __mutex_lock_slowpath+0x13/0x20
kernel:  mutex_lock+0x2e/0x40
kernel:  nvme_update_ns_ana_state+0x22/0x60 [nvme_core]
kernel:  nvme_update_ana_state+0xca/0xe0 [nvme_core]
kernel:  nvme_parse_ana_log+0xa1/0x180 [nvme_core]
kernel:  nvme_read_ana_log+0x76/0x100 [nvme_core]
kernel:  nvme_ana_work+0x15/0x20 [nvme_core]
kernel:  process_one_work+0x1db/0x380
kernel:  worker_thread+0x4d/0x400
kernel:  kthread+0x104/0x140
kernel:  ret_from_fork+0x35/0x40
kernel: INFO: task kworker/u8:4:439 blocked for more than 120 seconds.
kernel:       Tainted: G           OE     5.3.5-050305-generic #201910071830
kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: kworker/u8:4    D    0   439      2 0x80004000
kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core]
kernel: Call Trace:
kernel:  __schedule+0x2b9/0x6c0
kernel:  schedule+0x42/0xb0
kernel:  io_schedule+0x16/0x40
kernel:  do_read_cache_page+0x438/0x830
kernel:  read_cache_page+0x12/0x20
kernel:  read_dev_sector+0x27/0xc0
kernel:  read_lba+0xc1/0x220
kernel:  efi_partition+0x1e6/0x708
kernel:  check_partition+0x154/0x244
kernel:  rescan_partitions+0xae/0x280
kernel:  __blkdev_get+0x40f/0x560
kernel:  blkdev_get+0x3d/0x140
kernel:  __device_add_disk+0x388/0x480
kernel:  device_add_disk+0x13/0x20
kernel:  nvme_mpath_set_live+0x119/0x140 [nvme_core]
kernel:  nvme_update_ns_ana_state+0x5c/0x60 [nvme_core]
kernel:  nvme_mpath_add_disk+0xbe/0x100 [nvme_core]
kernel:  nvme_validate_ns+0x396/0x940 [nvme_core]
kernel:  nvme_scan_work+0x256/0x390 [nvme_core]
kernel:  process_one_work+0x1db/0x380
kernel:  worker_thread+0x4d/0x400
kernel:  kthread+0x104/0x140
kernel:  ret_from_fork+0x35/0x40

Fixes: 0d0b660f214d ("nvme: add ANA support")
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/multipath.c | 4 ++--
 drivers/nvme/host/nvme.h      | 2 ++
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 18f0a05c74b56..574b52e911f08 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -417,11 +417,11 @@ static void nvme_mpath_set_live(struct nvme_ns *ns)
 	if (!head->disk)
 		return;
 
-	mutex_lock(&head->lock);
-	if (!(head->disk->flags & GENHD_FL_UP))
+	if (!test_and_set_bit(NVME_NSHEAD_DISK_LIVE, &head->flags))
 		device_add_disk(&head->subsys->dev, head->disk,
 				nvme_ns_id_attr_groups);
 
+	mutex_lock(&head->lock);
 	if (nvme_path_is_optimized(ns)) {
 		int node, srcu_idx;
 
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 22e8401352c22..ed02260862cb5 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -345,6 +345,8 @@ struct nvme_ns_head {
 	spinlock_t		requeue_lock;
 	struct work_struct	requeue_work;
 	struct mutex		lock;
+	unsigned long		flags;
+#define NVME_NSHEAD_DISK_LIVE	0
 	struct nvme_ns __rcu	*current_path[];
 #endif
 };
-- 
2.25.1

[PATCH 5.4 17/65] nvme-multipath: fix bogus request queue reference put

[Greg Kroah-Hartman]

From: Sagi Grimberg <sagi@grimberg.me>

[ Upstream commit c31244669f57963b6ce133a5555b118fc50aec95 ]

The mpath disk node takes a reference on the request mpath
request queue when adding live path to the mpath gendisk.
However if we connected to an inaccessible path device_add_disk
is not called, so if we disconnect and remove the mpath gendisk
we endup putting an reference on the request queue that was
never taken [1].

Fix that to check if we ever added a live path (using
NVME_NS_HEAD_HAS_DISK flag) and if not, clear the disk->queue
reference.

[1]:
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 1 PID: 1372 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0
CPU: 1 PID: 1372 Comm: nvme Tainted: G           O      5.7.0-rc2+ #3
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1 04/01/2014
RIP: 0010:refcount_warn_saturate+0xa6/0xf0
RSP: 0018:ffffb29e8053bdc0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8b7a2f4fc060 RCX: 0000000000000007
RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff8b7a3ec99980
RBP: ffff8b7a2f4fc000 R08: 00000000000002e1 R09: 0000000000000004
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
R13: fffffffffffffff2 R14: ffffb29e8053bf08 R15: ffff8b7a320e2da0
FS:  00007f135d4ca800(0000) GS:ffff8b7a3ec80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005651178c0c30 CR3: 000000003b650005 CR4: 0000000000360ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 disk_release+0xa2/0xc0
 device_release+0x28/0x80
 kobject_put+0xa5/0x1b0
 nvme_put_ns_head+0x26/0x70 [nvme_core]
 nvme_put_ns+0x30/0x60 [nvme_core]
 nvme_remove_namespaces+0x9b/0xe0 [nvme_core]
 nvme_do_delete_ctrl+0x43/0x5c [nvme_core]
 nvme_sysfs_delete.cold+0x8/0xd [nvme_core]
 kernfs_fop_write+0xc1/0x1a0
 vfs_write+0xb6/0x1a0
 ksys_write+0x5f/0xe0
 do_syscall_64+0x52/0x1a0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported-by: Anton Eidelman <anton@lightbitslabs.com>
Tested-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/multipath.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 574b52e911f08..e1eeed5856570 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -691,6 +691,14 @@ void nvme_mpath_remove_disk(struct nvme_ns_head *head)
 	kblockd_schedule_work(&head->requeue_work);
 	flush_work(&head->requeue_work);
 	blk_cleanup_queue(head->disk->queue);
+	if (!test_bit(NVME_NSHEAD_DISK_LIVE, &head->flags)) {
+		/*
+		 * if device_add_disk wasn't called, prevent
+		 * disk release to put a bogus reference on the
+		 * request queue
+		 */
+		head->disk->queue = NULL;
+	}
 	put_disk(head->disk);
 }
 
-- 
2.25.1

[PATCH 5.4 18/65] kgdb: Avoid suspicious RCU usage warning

[Greg Kroah-Hartman]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 440ab9e10e2e6e5fd677473ee6f9e3af0f6904d6 ]

At times when I'm using kgdb I see a splat on my console about
suspicious RCU usage.  I managed to come up with a case that could
reproduce this that looked like this:

  WARNING: suspicious RCU usage
  5.7.0-rc4+ #609 Not tainted
  -----------------------------
  kernel/pid.c:395 find_task_by_pid_ns() needs rcu_read_lock() protection!

  other info that might help us debug this:

    rcu_scheduler_active = 2, debug_locks = 1
  3 locks held by swapper/0/1:
   #0: ffffff81b6b8e988 (&dev->mutex){....}-{3:3}, at: __device_attach+0x40/0x13c
   #1: ffffffd01109e9e8 (dbg_master_lock){....}-{2:2}, at: kgdb_cpu_enter+0x20c/0x7ac
   #2: ffffffd01109ea90 (dbg_slave_lock){....}-{2:2}, at: kgdb_cpu_enter+0x3ec/0x7ac

  stack backtrace:
  CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc4+ #609
  Hardware name: Google Cheza (rev3+) (DT)
  Call trace:
   dump_backtrace+0x0/0x1b8
   show_stack+0x1c/0x24
   dump_stack+0xd4/0x134
   lockdep_rcu_suspicious+0xf0/0x100
   find_task_by_pid_ns+0x5c/0x80
   getthread+0x8c/0xb0
   gdb_serial_stub+0x9d4/0xd04
   kgdb_cpu_enter+0x284/0x7ac
   kgdb_handle_exception+0x174/0x20c
   kgdb_brk_fn+0x24/0x30
   call_break_hook+0x6c/0x7c
   brk_handler+0x20/0x5c
   do_debug_exception+0x1c8/0x22c
   el1_sync_handler+0x3c/0xe4
   el1_sync+0x7c/0x100
   rpmh_rsc_probe+0x38/0x420
   platform_drv_probe+0x94/0xb4
   really_probe+0x134/0x300
   driver_probe_device+0x68/0x100
   __device_attach_driver+0x90/0xa8
   bus_for_each_drv+0x84/0xcc
   __device_attach+0xb4/0x13c
   device_initial_probe+0x18/0x20
   bus_probe_device+0x38/0x98
   device_add+0x38c/0x420

If I understand properly we should just be able to blanket kgdb under
one big RCU read lock and the problem should go away.  We'll add it to
the beast-of-a-function known as kgdb_cpu_enter().

With this I no longer get any splats and things seem to work fine.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200602154729.v2.1.I70e0d4fd46d5ed2aaf0c98a355e8e1b7a5bb7e4e@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/debug/debug_core.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index 7d54c7c280544..2222f3225e53d 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -546,6 +546,7 @@ static int kgdb_cpu_enter(struct kgdb_state *ks, struct pt_regs *regs,
 		arch_kgdb_ops.disable_hw_break(regs);
 
 acquirelock:
+	rcu_read_lock();
 	/*
 	 * Interrupts will be restored by the 'trap return' code, except when
 	 * single stepping.
@@ -602,6 +603,7 @@ return_normal:
 			atomic_dec(&slaves_in_kgdb);
 			dbg_touch_watchdogs();
 			local_irq_restore(flags);
+			rcu_read_unlock();
 			return 0;
 		}
 		cpu_relax();
@@ -620,6 +622,7 @@ return_normal:
 		raw_spin_unlock(&dbg_master_lock);
 		dbg_touch_watchdogs();
 		local_irq_restore(flags);
+		rcu_read_unlock();
 
 		goto acquirelock;
 	}
@@ -743,6 +746,7 @@ kgdb_restore:
 	raw_spin_unlock(&dbg_master_lock);
 	dbg_touch_watchdogs();
 	local_irq_restore(flags);
+	rcu_read_unlock();
 
 	return kgdb_info[cpu].ret_state;
 }
-- 
2.25.1

[PATCH 5.4 19/65] selftests: tpm: Use /bin/sh instead of /bin/bash

[Greg Kroah-Hartman]

From: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

commit 377ff83083c953dd58c5a030b3c9b5b85d8cc727 upstream.

It's better to use /bin/sh instead of /bin/bash in order to run the tests
in the BusyBox shell.

Fixes: 6ea3dfe1e073 ("selftests: add TPM 2.0 tests")
Cc: stable@vger.kernel.org
Cc: linux-integrity@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/testing/selftests/tpm2/test_smoke.sh |    2 +-
 tools/testing/selftests/tpm2/test_space.sh |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/tools/testing/selftests/tpm2/test_smoke.sh
+++ b/tools/testing/selftests/tpm2/test_smoke.sh
@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/bin/sh
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
 
 python -m unittest -v tpm2_tests.SmokeTest
--- a/tools/testing/selftests/tpm2/test_space.sh
+++ b/tools/testing/selftests/tpm2/test_space.sh
@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/bin/sh
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
 
 python -m unittest -v tpm2_tests.SpaceTest

[PATCH 5.4 20/65] tpm: Fix TIS locality timeout problems

[Greg Kroah-Hartman]

From: James Bottomley <James.Bottomley@HansenPartnership.com>

commit 7862840219058436b80029a0263fd1ef065fb1b3 upstream.

It has been reported that some TIS based TPMs are giving unexpected
errors when using the O_NONBLOCK path of the TPM device. The problem
is that some TPMs don't like it when you get and then relinquish a
locality (as the tpm_try_get_ops()/tpm_put_ops() pair does) without
sending a command.  This currently happens all the time in the
O_NONBLOCK write path. Fix this by moving the tpm_try_get_ops()
further down the code to after the O_NONBLOCK determination is made.
This is safe because the priv->buffer_mutex still protects the priv
state being modified.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206275
Fixes: d23d12484307 ("tpm: fix invalid locking in NONBLOCKING mode")
Reported-by: Mario Limonciello <Mario.Limonciello@dell.com>
Tested-by: Alex Guzman <alex@guzman.io>
Cc: stable@vger.kernel.org
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/tpm/tpm-dev-common.c |   19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

--- a/drivers/char/tpm/tpm-dev-common.c
+++ b/drivers/char/tpm/tpm-dev-common.c
@@ -189,15 +189,6 @@ ssize_t tpm_common_write(struct file *fi
 		goto out;
 	}
 
-	/* atomic tpm command send and result receive. We only hold the ops
-	 * lock during this period so that the tpm can be unregistered even if
-	 * the char dev is held open.
-	 */
-	if (tpm_try_get_ops(priv->chip)) {
-		ret = -EPIPE;
-		goto out;
-	}
-
 	priv->response_length = 0;
 	priv->response_read = false;
 	*off = 0;
@@ -211,11 +202,19 @@ ssize_t tpm_common_write(struct file *fi
 	if (file->f_flags & O_NONBLOCK) {
 		priv->command_enqueued = true;
 		queue_work(tpm_dev_wq, &priv->async_work);
-		tpm_put_ops(priv->chip);
 		mutex_unlock(&priv->buffer_mutex);
 		return size;
 	}
 
+	/* atomic tpm command send and result receive. We only hold the ops
+	 * lock during this period so that the tpm can be unregistered even if
+	 * the char dev is held open.
+	 */
+	if (tpm_try_get_ops(priv->chip)) {
+		ret = -EPIPE;
+		goto out;
+	}
+
 	ret = tpm_dev_transmit(priv->chip, priv->space, priv->data_buffer,
 			       sizeof(priv->data_buffer));
 	tpm_put_ops(priv->chip);

[PATCH 5.4 21/65] crypto: af_alg - fix use-after-free in af_alg_accept() due to bh_lock_sock()

[Greg Kroah-Hartman]

From: Herbert Xu <herbert@gondor.apana.org.au>

commit 34c86f4c4a7be3b3e35aa48bd18299d4c756064d upstream.

The locking in af_alg_release_parent is broken as the BH socket
lock can only be taken if there is a code-path to handle the case
where the lock is owned by process-context.  Instead of adding
such handling, we can fix this by changing the ref counts to
atomic_t.

This patch also modifies the main refcnt to include both normal
and nokey sockets.  This way we don't have to fudge the nokey
ref count when a socket changes from nokey to normal.

Credits go to Mauricio Faria de Oliveira who diagnosed this bug
and sent a patch for it:

https://lore.kernel.org/linux-crypto/20200605161657.535043-1-mfo@canonical.com/

Reported-by: Brian Moyles <bmoyles@netflix.com>
Reported-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Fixes: 37f96694cf73 ("crypto: af_alg - Use bh_lock_sock in...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/af_alg.c         |   26 +++++++++++---------------
 crypto/algif_aead.c     |    9 +++------
 crypto/algif_hash.c     |    9 +++------
 crypto/algif_skcipher.c |    9 +++------
 include/crypto/if_alg.h |    4 ++--
 5 files changed, 22 insertions(+), 35 deletions(-)

--- a/crypto/af_alg.c
+++ b/crypto/af_alg.c
@@ -128,21 +128,15 @@ EXPORT_SYMBOL_GPL(af_alg_release);
 void af_alg_release_parent(struct sock *sk)
 {
 	struct alg_sock *ask = alg_sk(sk);
-	unsigned int nokey = ask->nokey_refcnt;
-	bool last = nokey && !ask->refcnt;
+	unsigned int nokey = atomic_read(&ask->nokey_refcnt);
 
 	sk = ask->parent;
 	ask = alg_sk(sk);
 
-	local_bh_disable();
-	bh_lock_sock(sk);
-	ask->nokey_refcnt -= nokey;
-	if (!last)
-		last = !--ask->refcnt;
-	bh_unlock_sock(sk);
-	local_bh_enable();
+	if (nokey)
+		atomic_dec(&ask->nokey_refcnt);
 
-	if (last)
+	if (atomic_dec_and_test(&ask->refcnt))
 		sock_put(sk);
 }
 EXPORT_SYMBOL_GPL(af_alg_release_parent);
@@ -187,7 +181,7 @@ static int alg_bind(struct socket *sock,
 
 	err = -EBUSY;
 	lock_sock(sk);
-	if (ask->refcnt | ask->nokey_refcnt)
+	if (atomic_read(&ask->refcnt))
 		goto unlock;
 
 	swap(ask->type, type);
@@ -236,7 +230,7 @@ static int alg_setsockopt(struct socket
 	int err = -EBUSY;
 
 	lock_sock(sk);
-	if (ask->refcnt)
+	if (atomic_read(&ask->refcnt) != atomic_read(&ask->nokey_refcnt))
 		goto unlock;
 
 	type = ask->type;
@@ -301,12 +295,14 @@ int af_alg_accept(struct sock *sk, struc
 	if (err)
 		goto unlock;
 
-	if (nokey || !ask->refcnt++)
+	if (atomic_inc_return_relaxed(&ask->refcnt) == 1)
 		sock_hold(sk);
-	ask->nokey_refcnt += nokey;
+	if (nokey) {
+		atomic_inc(&ask->nokey_refcnt);
+		atomic_set(&alg_sk(sk2)->nokey_refcnt, 1);
+	}
 	alg_sk(sk2)->parent = sk;
 	alg_sk(sk2)->type = type;
-	alg_sk(sk2)->nokey_refcnt = nokey;
 
 	newsock->ops = type->ops;
 	newsock->state = SS_CONNECTED;
--- a/crypto/algif_aead.c
+++ b/crypto/algif_aead.c
@@ -384,7 +384,7 @@ static int aead_check_key(struct socket
 	struct alg_sock *ask = alg_sk(sk);
 
 	lock_sock(sk);
-	if (ask->refcnt)
+	if (!atomic_read(&ask->nokey_refcnt))
 		goto unlock_child;
 
 	psk = ask->parent;
@@ -396,11 +396,8 @@ static int aead_check_key(struct socket
 	if (crypto_aead_get_flags(tfm->aead) & CRYPTO_TFM_NEED_KEY)
 		goto unlock;
 
-	if (!pask->refcnt++)
-		sock_hold(psk);
-
-	ask->refcnt = 1;
-	sock_put(psk);
+	atomic_dec(&pask->nokey_refcnt);
+	atomic_set(&ask->nokey_refcnt, 0);
 
 	err = 0;
 
--- a/crypto/algif_hash.c
+++ b/crypto/algif_hash.c
@@ -301,7 +301,7 @@ static int hash_check_key(struct socket
 	struct alg_sock *ask = alg_sk(sk);
 
 	lock_sock(sk);
-	if (ask->refcnt)
+	if (!atomic_read(&ask->nokey_refcnt))
 		goto unlock_child;
 
 	psk = ask->parent;
@@ -313,11 +313,8 @@ static int hash_check_key(struct socket
 	if (crypto_ahash_get_flags(tfm) & CRYPTO_TFM_NEED_KEY)
 		goto unlock;
 
-	if (!pask->refcnt++)
-		sock_hold(psk);
-
-	ask->refcnt = 1;
-	sock_put(psk);
+	atomic_dec(&pask->nokey_refcnt);
+	atomic_set(&ask->nokey_refcnt, 0);
 
 	err = 0;
 
--- a/crypto/algif_skcipher.c
+++ b/crypto/algif_skcipher.c
@@ -211,7 +211,7 @@ static int skcipher_check_key(struct soc
 	struct alg_sock *ask = alg_sk(sk);
 
 	lock_sock(sk);
-	if (ask->refcnt)
+	if (!atomic_read(&ask->nokey_refcnt))
 		goto unlock_child;
 
 	psk = ask->parent;
@@ -223,11 +223,8 @@ static int skcipher_check_key(struct soc
 	if (crypto_skcipher_get_flags(tfm) & CRYPTO_TFM_NEED_KEY)
 		goto unlock;
 
-	if (!pask->refcnt++)
-		sock_hold(psk);
-
-	ask->refcnt = 1;
-	sock_put(psk);
+	atomic_dec(&pask->nokey_refcnt);
+	atomic_set(&ask->nokey_refcnt, 0);
 
 	err = 0;
 
--- a/include/crypto/if_alg.h
+++ b/include/crypto/if_alg.h
@@ -29,8 +29,8 @@ struct alg_sock {
 
 	struct sock *parent;
 
-	unsigned int refcnt;
-	unsigned int nokey_refcnt;
+	atomic_t refcnt;
+	atomic_t nokey_refcnt;
 
 	const struct af_alg_type *type;
 	void *private;

[PATCH 5.4 22/65] drm/msm/dpu: fix error return code in dpu_encoder_init

[Greg Kroah-Hartman]

From: Chen Tao <chentao107@huawei.com>

[ Upstream commit aa472721c8dbe1713cf510f56ffbc56ae9e14247 ]

Fix to return negative error code -ENOMEM with the use of
ERR_PTR from dpu_encoder_init.

Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Chen Tao <chentao107@huawei.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index d82ea994063fa..edf7989d7a8ee 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -2232,7 +2232,7 @@ struct drm_encoder *dpu_encoder_init(struct drm_device *dev,
 
 	dpu_enc = devm_kzalloc(dev->dev, sizeof(*dpu_enc), GFP_KERNEL);
 	if (!dpu_enc)
-		return ERR_PTR(ENOMEM);
+		return ERR_PTR(-ENOMEM);
 
 	rc = drm_encoder_init(dev, &dpu_enc->base, &dpu_encoder_funcs,
 			drm_enc_mode, NULL);
-- 
2.25.1

[PATCH 5.4 23/65] rxrpc: Fix afs large storage transmission performance drop

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 02c28dffb13abbaaedece1e4a6493b48ad3f913a ]

Commit 2ad6691d988c, which moved the modification of the status annotation
for a packet in the Tx buffer prior to the retransmission moved the state
clearance, but managed to lose the bit that set it to UNACK.

Consequently, if a retransmission occurs, the packet is accidentally
changed to the ACK state (ie. 0) by masking it off, which means that the
packet isn't counted towards the tally of newly-ACK'd packets if it gets
hard-ACK'd.  This then prevents the congestion control algorithm from
recovering properly.

Fix by reinstating the change of state to UNACK.

Spotted by the generic/460 xfstest.

Fixes: 2ad6691d988c ("rxrpc: Fix race between incoming ACK parser and retransmitter")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rxrpc/call_event.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/rxrpc/call_event.c b/net/rxrpc/call_event.c
index 985fb89202d0c..9ff85ee8337cd 100644
--- a/net/rxrpc/call_event.c
+++ b/net/rxrpc/call_event.c
@@ -253,7 +253,7 @@ static void rxrpc_resend(struct rxrpc_call *call, unsigned long now_j)
 		 * confuse things
 		 */
 		annotation &= ~RXRPC_TX_ANNO_MASK;
-		annotation |= RXRPC_TX_ANNO_RESENT;
+		annotation |= RXRPC_TX_ANNO_UNACK | RXRPC_TX_ANNO_RESENT;
 		call->rxtx_annotations[ix] = annotation;
 
 		skb = call->rxtx_buffer[ix];
-- 
2.25.1

[PATCH 5.4 24/65] RDMA/counter: Query a counter before release

[Greg Kroah-Hartman]

From: Mark Zhang <markz@mellanox.com>

[ Upstream commit c1d869d64a1955817c4d6fff08ecbbe8e59d36f8 ]

Query a dynamically-allocated counter before release it, to update it's
hwcounters and log all of them into history data. Otherwise all values of
these hwcounters will be lost.

Fixes: f34a55e497e8 ("RDMA/core: Get sum value of all counters when perform a sysfs stat read")
Link: https://lore.kernel.org/r/20200621110000.56059-1-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/counters.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/core/counters.c b/drivers/infiniband/core/counters.c
index 46dd50ff7c85a..11210bf7fd61b 100644
--- a/drivers/infiniband/core/counters.c
+++ b/drivers/infiniband/core/counters.c
@@ -195,7 +195,7 @@ static int __rdma_counter_unbind_qp(struct ib_qp *qp)
 	return ret;
 }
 
-static void counter_history_stat_update(const struct rdma_counter *counter)
+static void counter_history_stat_update(struct rdma_counter *counter)
 {
 	struct ib_device *dev = counter->device;
 	struct rdma_port_counter *port_counter;
@@ -205,6 +205,8 @@ static void counter_history_stat_update(const struct rdma_counter *counter)
 	if (!port_counter->hstats)
 		return;
 
+	rdma_counter_query_stats(counter);
+
 	for (i = 0; i < counter->stats->num_counters; i++)
 		port_counter->hstats->value[i] += counter->stats->value[i];
 }
-- 
2.25.1

[PATCH 5.4 25/65] cxgb4: use unaligned conversion for fetching timestamp

[Greg Kroah-Hartman]

From: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

[ Upstream commit 589b1c9c166dce120e27b32a83a78f55464a7ef9 ]

Use get_unaligned_be64() to fetch the timestamp needed for ns_to_ktime()
conversion.

Fixes following sparse warning:
sge.c:3282:43: warning: cast to restricted __be64

Fixes: a456950445a0 ("cxgb4: time stamping interface for PTP")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/cxgb4/sge.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
index 3a45ac8f0e011..506170fe3a8b7 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -2816,7 +2816,7 @@ static noinline int t4_systim_to_hwstamp(struct adapter *adapter,
 
 	hwtstamps = skb_hwtstamps(skb);
 	memset(hwtstamps, 0, sizeof(*hwtstamps));
-	hwtstamps->hwtstamp = ns_to_ktime(be64_to_cpu(*((u64 *)data)));
+	hwtstamps->hwtstamp = ns_to_ktime(get_unaligned_be64(data));
 
 	return RX_PTP_PKT_SUC;
 }
-- 
2.25.1

[PATCH 5.4 26/65] cxgb4: parse TC-U32 key values and masks natively

[Greg Kroah-Hartman]

From: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

[ Upstream commit 27f78cb245abdb86735529c13b0a579f57829e71 ]

TC-U32 passes all keys values and masks in __be32 format. The parser
already expects this and hence pass the value and masks in __be32
natively to the parser.

Fixes following sparse warnings in several places:
cxgb4_tc_u32.c:57:21: warning: incorrect type in assignment (different base
types)
cxgb4_tc_u32.c:57:21:    expected unsigned int [usertype] val
cxgb4_tc_u32.c:57:21:    got restricted __be32 [usertype] val
cxgb4_tc_u32_parse.h:48:24: warning: cast to restricted __be32

Fixes: 2e8aad7bf203 ("cxgb4: add parser to translate u32 filters to internal spec")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c |  18 +--
 .../chelsio/cxgb4/cxgb4_tc_u32_parse.h        | 122 ++++++++++++------
 2 files changed, 91 insertions(+), 49 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c
index 02fc63fa7f256..b3a342561a968 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c
@@ -47,7 +47,7 @@ static int fill_match_fields(struct adapter *adap,
 			     bool next_header)
 {
 	unsigned int i, j;
-	u32 val, mask;
+	__be32 val, mask;
 	int off, err;
 	bool found;
 
@@ -216,7 +216,7 @@ int cxgb4_config_knode(struct net_device *dev, struct tc_cls_u32_offload *cls)
 		const struct cxgb4_next_header *next;
 		bool found = false;
 		unsigned int i, j;
-		u32 val, mask;
+		__be32 val, mask;
 		int off;
 
 		if (t->table[link_uhtid - 1].link_handle) {
@@ -230,10 +230,10 @@ int cxgb4_config_knode(struct net_device *dev, struct tc_cls_u32_offload *cls)
 
 		/* Try to find matches that allow jumps to next header. */
 		for (i = 0; next[i].jump; i++) {
-			if (next[i].offoff != cls->knode.sel->offoff ||
-			    next[i].shift != cls->knode.sel->offshift ||
-			    next[i].mask != cls->knode.sel->offmask ||
-			    next[i].offset != cls->knode.sel->off)
+			if (next[i].sel.offoff != cls->knode.sel->offoff ||
+			    next[i].sel.offshift != cls->knode.sel->offshift ||
+			    next[i].sel.offmask != cls->knode.sel->offmask ||
+			    next[i].sel.off != cls->knode.sel->off)
 				continue;
 
 			/* Found a possible candidate.  Find a key that
@@ -245,9 +245,9 @@ int cxgb4_config_knode(struct net_device *dev, struct tc_cls_u32_offload *cls)
 				val = cls->knode.sel->keys[j].val;
 				mask = cls->knode.sel->keys[j].mask;
 
-				if (next[i].match_off == off &&
-				    next[i].match_val == val &&
-				    next[i].match_mask == mask) {
+				if (next[i].key.off == off &&
+				    next[i].key.val == val &&
+				    next[i].key.mask == mask) {
 					found = true;
 					break;
 				}
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32_parse.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32_parse.h
index a4b99edcc3399..141085e159e57 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32_parse.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32_parse.h
@@ -38,12 +38,12 @@
 struct cxgb4_match_field {
 	int off; /* Offset from the beginning of the header to match */
 	/* Fill the value/mask pair in the spec if matched */
-	int (*val)(struct ch_filter_specification *f, u32 val, u32 mask);
+	int (*val)(struct ch_filter_specification *f, __be32 val, __be32 mask);
 };
 
 /* IPv4 match fields */
 static inline int cxgb4_fill_ipv4_tos(struct ch_filter_specification *f,
-				      u32 val, u32 mask)
+				      __be32 val, __be32 mask)
 {
 	f->val.tos  = (ntohl(val)  >> 16) & 0x000000FF;
 	f->mask.tos = (ntohl(mask) >> 16) & 0x000000FF;
@@ -52,7 +52,7 @@ static inline int cxgb4_fill_ipv4_tos(struct ch_filter_specification *f,
 }
 
 static inline int cxgb4_fill_ipv4_frag(struct ch_filter_specification *f,
-				       u32 val, u32 mask)
+				       __be32 val, __be32 mask)
 {
 	u32 mask_val;
 	u8 frag_val;
@@ -74,7 +74,7 @@ static inline int cxgb4_fill_ipv4_frag(struct ch_filter_specification *f,
 }
 
 static inline int cxgb4_fill_ipv4_proto(struct ch_filter_specification *f,
-					u32 val, u32 mask)
+					__be32 val, __be32 mask)
 {
 	f->val.proto  = (ntohl(val)  >> 16) & 0x000000FF;
 	f->mask.proto = (ntohl(mask) >> 16) & 0x000000FF;
@@ -83,7 +83,7 @@ static inline int cxgb4_fill_ipv4_proto(struct ch_filter_specification *f,
 }
 
 static inline int cxgb4_fill_ipv4_src_ip(struct ch_filter_specification *f,
-					 u32 val, u32 mask)
+					 __be32 val, __be32 mask)
 {
 	memcpy(&f->val.fip[0],  &val,  sizeof(u32));
 	memcpy(&f->mask.fip[0], &mask, sizeof(u32));
@@ -92,7 +92,7 @@ static inline int cxgb4_fill_ipv4_src_ip(struct ch_filter_specification *f,
 }
 
 static inline int cxgb4_fill_ipv4_dst_ip(struct ch_filter_specification *f,
-					 u32 val, u32 mask)
+					 __be32 val, __be32 mask)
 {
 	memcpy(&f->val.lip[0],  &val,  sizeof(u32));
 	memcpy(&f->mask.lip[0], &mask, sizeof(u32));
@@ -111,7 +111,7 @@ static const struct cxgb4_match_field cxgb4_ipv4_fields[] = {
 
 /* IPv6 match fields */
 static inline int cxgb4_fill_ipv6_tos(struct ch_filter_specification *f,
-				      u32 val, u32 mask)
+				      __be32 val, __be32 mask)
 {
 	f->val.tos  = (ntohl(val)  >> 20) & 0x000000FF;
 	f->mask.tos = (ntohl(mask) >> 20) & 0x000000FF;
@@ -120,7 +120,7 @@ static inline int cxgb4_fill_ipv6_tos(struct ch_filter_specification *f,
 }
 
 static inline int cxgb4_fill_ipv6_proto(struct ch_filter_specification *f,
-					u32 val, u32 mask)
+					__be32 val, __be32 mask)
 {
 	f->val.proto  = (ntohl(val)  >> 8) & 0x000000FF;
 	f->mask.proto = (ntohl(mask) >> 8) & 0x000000FF;
@@ -129,7 +129,7 @@ static inline int cxgb4_fill_ipv6_proto(struct ch_filter_specification *f,
 }
 
 static inline int cxgb4_fill_ipv6_src_ip0(struct ch_filter_specification *f,
-					  u32 val, u32 mask)
+					  __be32 val, __be32 mask)
 {
 	memcpy(&f->val.fip[0],  &val,  sizeof(u32));
 	memcpy(&f->mask.fip[0], &mask, sizeof(u32));
@@ -138,7 +138,7 @@ static inline int cxgb4_fill_ipv6_src_ip0(struct ch_filter_specification *f,
 }
 
 static inline int cxgb4_fill_ipv6_src_ip1(struct ch_filter_specification *f,
-					  u32 val, u32 mask)
+					  __be32 val, __be32 mask)
 {
 	memcpy(&f->val.fip[4],  &val,  sizeof(u32));
 	memcpy(&f->mask.fip[4], &mask, sizeof(u32));
@@ -147,7 +147,7 @@ static inline int cxgb4_fill_ipv6_src_ip1(struct ch_filter_specification *f,
 }
 
 static inline int cxgb4_fill_ipv6_src_ip2(struct ch_filter_specification *f,
-					  u32 val, u32 mask)
+					  __be32 val, __be32 mask)
 {
 	memcpy(&f->val.fip[8],  &val,  sizeof(u32));
 	memcpy(&f->mask.fip[8], &mask, sizeof(u32));
@@ -156,7 +156,7 @@ static inline int cxgb4_fill_ipv6_src_ip2(struct ch_filter_specification *f,
 }
 
 static inline int cxgb4_fill_ipv6_src_ip3(struct ch_filter_specification *f,
-					  u32 val, u32 mask)
+					  __be32 val, __be32 mask)
 {
 	memcpy(&f->val.fip[12],  &val,  sizeof(u32));
 	memcpy(&f->mask.fip[12], &mask, sizeof(u32));
@@ -165,7 +165,7 @@ static inline int cxgb4_fill_ipv6_src_ip3(struct ch_filter_specification *f,
 }
 
 static inline int cxgb4_fill_ipv6_dst_ip0(struct ch_filter_specification *f,
-					  u32 val, u32 mask)
+					  __be32 val, __be32 mask)
 {
 	memcpy(&f->val.lip[0],  &val,  sizeof(u32));
 	memcpy(&f->mask.lip[0], &mask, sizeof(u32));
@@ -174,7 +174,7 @@ static inline int cxgb4_fill_ipv6_dst_ip0(struct ch_filter_specification *f,
 }
 
 static inline int cxgb4_fill_ipv6_dst_ip1(struct ch_filter_specification *f,
-					  u32 val, u32 mask)
+					  __be32 val, __be32 mask)
 {
 	memcpy(&f->val.lip[4],  &val,  sizeof(u32));
 	memcpy(&f->mask.lip[4], &mask, sizeof(u32));
@@ -183,7 +183,7 @@ static inline int cxgb4_fill_ipv6_dst_ip1(struct ch_filter_specification *f,
 }
 
 static inline int cxgb4_fill_ipv6_dst_ip2(struct ch_filter_specification *f,
-					  u32 val, u32 mask)
+					  __be32 val, __be32 mask)
 {
 	memcpy(&f->val.lip[8],  &val,  sizeof(u32));
 	memcpy(&f->mask.lip[8], &mask, sizeof(u32));
@@ -192,7 +192,7 @@ static inline int cxgb4_fill_ipv6_dst_ip2(struct ch_filter_specification *f,
 }
 
 static inline int cxgb4_fill_ipv6_dst_ip3(struct ch_filter_specification *f,
-					  u32 val, u32 mask)
+					  __be32 val, __be32 mask)
 {
 	memcpy(&f->val.lip[12],  &val,  sizeof(u32));
 	memcpy(&f->mask.lip[12], &mask, sizeof(u32));
@@ -216,7 +216,7 @@ static const struct cxgb4_match_field cxgb4_ipv6_fields[] = {
 
 /* TCP/UDP match */
 static inline int cxgb4_fill_l4_ports(struct ch_filter_specification *f,
-				      u32 val, u32 mask)
+				      __be32 val, __be32 mask)
 {
 	f->val.fport  = ntohl(val)  >> 16;
 	f->mask.fport = ntohl(mask) >> 16;
@@ -237,19 +237,13 @@ static const struct cxgb4_match_field cxgb4_udp_fields[] = {
 };
 
 struct cxgb4_next_header {
-	unsigned int offset; /* Offset to next header */
-	/* offset, shift, and mask added to offset above
+	/* Offset, shift, and mask added to beginning of the header
 	 * to get to next header.  Useful when using a header
 	 * field's value to jump to next header such as IHL field
 	 * in IPv4 header.
 	 */
-	unsigned int offoff;
-	u32 shift;
-	u32 mask;
-	/* match criteria to make this jump */
-	unsigned int match_off;
-	u32 match_val;
-	u32 match_mask;
+	struct tc_u32_sel sel;
+	struct tc_u32_key key;
 	/* location of jump to make */
 	const struct cxgb4_match_field *jump;
 };
@@ -258,26 +252,74 @@ struct cxgb4_next_header {
  * IPv4 header.
  */
 static const struct cxgb4_next_header cxgb4_ipv4_jumps[] = {
-	{ .offset = 0, .offoff = 0, .shift = 6, .mask = 0xF,
-	  .match_off = 8, .match_val = 0x600, .match_mask = 0xFF00,
-	  .jump = cxgb4_tcp_fields },
-	{ .offset = 0, .offoff = 0, .shift = 6, .mask = 0xF,
-	  .match_off = 8, .match_val = 0x1100, .match_mask = 0xFF00,
-	  .jump = cxgb4_udp_fields },
-	{ .jump = NULL }
+	{
+		/* TCP Jump */
+		.sel = {
+			.off = 0,
+			.offoff = 0,
+			.offshift = 6,
+			.offmask = cpu_to_be16(0x0f00),
+		},
+		.key = {
+			.off = 8,
+			.val = cpu_to_be32(0x00060000),
+			.mask = cpu_to_be32(0x00ff0000),
+		},
+		.jump = cxgb4_tcp_fields,
+	},
+	{
+		/* UDP Jump */
+		.sel = {
+			.off = 0,
+			.offoff = 0,
+			.offshift = 6,
+			.offmask = cpu_to_be16(0x0f00),
+		},
+		.key = {
+			.off = 8,
+			.val = cpu_to_be32(0x00110000),
+			.mask = cpu_to_be32(0x00ff0000),
+		},
+		.jump = cxgb4_udp_fields,
+	},
+	{ .jump = NULL },
 };
 
 /* Accept a rule with a jump directly past the 40 Bytes of IPv6 fixed header
  * to get to transport layer header.
  */
 static const struct cxgb4_next_header cxgb4_ipv6_jumps[] = {
-	{ .offset = 0x28, .offoff = 0, .shift = 0, .mask = 0,
-	  .match_off = 4, .match_val = 0x60000, .match_mask = 0xFF0000,
-	  .jump = cxgb4_tcp_fields },
-	{ .offset = 0x28, .offoff = 0, .shift = 0, .mask = 0,
-	  .match_off = 4, .match_val = 0x110000, .match_mask = 0xFF0000,
-	  .jump = cxgb4_udp_fields },
-	{ .jump = NULL }
+	{
+		/* TCP Jump */
+		.sel = {
+			.off = 40,
+			.offoff = 0,
+			.offshift = 0,
+			.offmask = 0,
+		},
+		.key = {
+			.off = 4,
+			.val = cpu_to_be32(0x00000600),
+			.mask = cpu_to_be32(0x0000ff00),
+		},
+		.jump = cxgb4_tcp_fields,
+	},
+	{
+		/* UDP Jump */
+		.sel = {
+			.off = 40,
+			.offoff = 0,
+			.offshift = 0,
+			.offmask = 0,
+		},
+		.key = {
+			.off = 4,
+			.val = cpu_to_be32(0x00001100),
+			.mask = cpu_to_be32(0x0000ff00),
+		},
+		.jump = cxgb4_udp_fields,
+	},
+	{ .jump = NULL },
 };
 
 struct cxgb4_link {
-- 
2.25.1

[PATCH 5.4 27/65] cxgb4: fix endian conversions for L4 ports in filters

[Greg Kroah-Hartman]

From: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

[ Upstream commit 63b53b0b99cd5f2d9754a21eda2ed8e706646cc9 ]

The source and destination L4 ports in filter offload need to be
in CPU endian. They will finally be converted to Big Endian after
all operations are done and before giving them to hardware. The
L4 ports for NAT are expected to be passed as a byte stream TCB.
So, treat them as such.

Fixes following sparse warnings in several places:
cxgb4_tc_flower.c:159:33: warning: cast from restricted __be16
cxgb4_tc_flower.c:159:33: warning: incorrect type in argument 1 (different
base types)
cxgb4_tc_flower.c:159:33:    expected unsigned short [usertype] val
cxgb4_tc_flower.c:159:33:    got restricted __be16 [usertype] dst

Fixes: dca4faeb812f ("cxgb4: Add LE hash collision bug fix path in LLD driver")
Fixes: 62488e4b53ae ("cxgb4: add basic tc flower offload support")
Fixes: 557ccbf9dfa8 ("cxgb4: add tc flower support for L3/L4 rewrite")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/chelsio/cxgb4/cxgb4_filter.c | 15 +++++++---
 .../net/ethernet/chelsio/cxgb4/cxgb4_main.c   |  2 +-
 .../ethernet/chelsio/cxgb4/cxgb4_tc_flower.c  | 30 +++++++------------
 3 files changed, 22 insertions(+), 25 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c
index 43b0f8c57da7f..8a67a04a5bbc6 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c
@@ -165,6 +165,9 @@ static void set_nat_params(struct adapter *adap, struct filter_entry *f,
 			   unsigned int tid, bool dip, bool sip, bool dp,
 			   bool sp)
 {
+	u8 *nat_lp = (u8 *)&f->fs.nat_lport;
+	u8 *nat_fp = (u8 *)&f->fs.nat_fport;
+
 	if (dip) {
 		if (f->fs.type) {
 			set_tcb_field(adap, f, tid, TCB_SND_UNA_RAW_W,
@@ -236,8 +239,9 @@ static void set_nat_params(struct adapter *adap, struct filter_entry *f,
 	}
 
 	set_tcb_field(adap, f, tid, TCB_PDU_HDR_LEN_W, WORD_MASK,
-		      (dp ? f->fs.nat_lport : 0) |
-		      (sp ? f->fs.nat_fport << 16 : 0), 1);
+		      (dp ? (nat_lp[1] | nat_lp[0] << 8) : 0) |
+		      (sp ? (nat_fp[1] << 16 | nat_fp[0] << 24) : 0),
+		      1);
 }
 
 /* Validate filter spec against configuration done on the card. */
@@ -656,6 +660,9 @@ int set_filter_wr(struct adapter *adapter, int fidx)
 	fwr->fpm = htons(f->fs.mask.fport);
 
 	if (adapter->params.filter2_wr_support) {
+		u8 *nat_lp = (u8 *)&f->fs.nat_lport;
+		u8 *nat_fp = (u8 *)&f->fs.nat_fport;
+
 		fwr->natmode_to_ulp_type =
 			FW_FILTER2_WR_ULP_TYPE_V(f->fs.nat_mode ?
 						 ULP_MODE_TCPDDP :
@@ -663,8 +670,8 @@ int set_filter_wr(struct adapter *adapter, int fidx)
 			FW_FILTER2_WR_NATMODE_V(f->fs.nat_mode);
 		memcpy(fwr->newlip, f->fs.nat_lip, sizeof(fwr->newlip));
 		memcpy(fwr->newfip, f->fs.nat_fip, sizeof(fwr->newfip));
-		fwr->newlport = htons(f->fs.nat_lport);
-		fwr->newfport = htons(f->fs.nat_fport);
+		fwr->newlport = htons(nat_lp[1] | nat_lp[0] << 8);
+		fwr->newfport = htons(nat_fp[1] | nat_fp[0] << 8);
 	}
 
 	/* Mark the filter as "pending" and ship off the Filter Work Request.
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 069a518478850..deb1c1f301078 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -2504,7 +2504,7 @@ int cxgb4_create_server_filter(const struct net_device *dev, unsigned int stid,
 
 	/* Clear out filter specifications */
 	memset(&f->fs, 0, sizeof(struct ch_filter_specification));
-	f->fs.val.lport = cpu_to_be16(sport);
+	f->fs.val.lport = be16_to_cpu(sport);
 	f->fs.mask.lport  = ~0;
 	val = (u8 *)&sip;
 	if ((val[0] | val[1] | val[2] | val[3]) != 0) {
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c
index e447976bdd3e0..16a939f9b04d5 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c
@@ -58,10 +58,6 @@ static struct ch_tc_pedit_fields pedits[] = {
 	PEDIT_FIELDS(IP6_, DST_63_32, 4, nat_lip, 4),
 	PEDIT_FIELDS(IP6_, DST_95_64, 4, nat_lip, 8),
 	PEDIT_FIELDS(IP6_, DST_127_96, 4, nat_lip, 12),
-	PEDIT_FIELDS(TCP_, SPORT, 2, nat_fport, 0),
-	PEDIT_FIELDS(TCP_, DPORT, 2, nat_lport, 0),
-	PEDIT_FIELDS(UDP_, SPORT, 2, nat_fport, 0),
-	PEDIT_FIELDS(UDP_, DPORT, 2, nat_lport, 0),
 };
 
 static struct ch_tc_flower_entry *allocate_flower_entry(void)
@@ -156,14 +152,14 @@ static void cxgb4_process_flow_match(struct net_device *dev,
 		struct flow_match_ports match;
 
 		flow_rule_match_ports(rule, &match);
-		fs->val.lport = cpu_to_be16(match.key->dst);
-		fs->mask.lport = cpu_to_be16(match.mask->dst);
-		fs->val.fport = cpu_to_be16(match.key->src);
-		fs->mask.fport = cpu_to_be16(match.mask->src);
+		fs->val.lport = be16_to_cpu(match.key->dst);
+		fs->mask.lport = be16_to_cpu(match.mask->dst);
+		fs->val.fport = be16_to_cpu(match.key->src);
+		fs->mask.fport = be16_to_cpu(match.mask->src);
 
 		/* also initialize nat_lport/fport to same values */
-		fs->nat_lport = cpu_to_be16(match.key->dst);
-		fs->nat_fport = cpu_to_be16(match.key->src);
+		fs->nat_lport = fs->val.lport;
+		fs->nat_fport = fs->val.fport;
 	}
 
 	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_IP)) {
@@ -354,12 +350,9 @@ static void process_pedit_field(struct ch_filter_specification *fs, u32 val,
 		switch (offset) {
 		case PEDIT_TCP_SPORT_DPORT:
 			if (~mask & PEDIT_TCP_UDP_SPORT_MASK)
-				offload_pedit(fs, cpu_to_be32(val) >> 16,
-					      cpu_to_be32(mask) >> 16,
-					      TCP_SPORT);
+				fs->nat_fport = val;
 			else
-				offload_pedit(fs, cpu_to_be32(val),
-					      cpu_to_be32(mask), TCP_DPORT);
+				fs->nat_lport = val >> 16;
 		}
 		fs->nat_mode = NAT_MODE_ALL;
 		break;
@@ -367,12 +360,9 @@ static void process_pedit_field(struct ch_filter_specification *fs, u32 val,
 		switch (offset) {
 		case PEDIT_UDP_SPORT_DPORT:
 			if (~mask & PEDIT_TCP_UDP_SPORT_MASK)
-				offload_pedit(fs, cpu_to_be32(val) >> 16,
-					      cpu_to_be32(mask) >> 16,
-					      UDP_SPORT);
+				fs->nat_fport = val;
 			else
-				offload_pedit(fs, cpu_to_be32(val),
-					      cpu_to_be32(mask), UDP_DPORT);
+				fs->nat_lport = val >> 16;
 		}
 		fs->nat_mode = NAT_MODE_ALL;
 	}
-- 
2.25.1

[PATCH 5.4 28/65] cxgb4: use correct type for all-mask IP address comparison

[Greg Kroah-Hartman]

From: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

[ Upstream commit f286dd8eaad5a2758750f407ab079298e0bcc8a5 ]

Use correct type to check for all-mask exact match IP addresses.

Fixes following sparse warnings due to big endian value checks
against 0xffffffff in is_addr_all_mask():
cxgb4_filter.c:977:25: warning: restricted __be32 degrades to integer
cxgb4_filter.c:983:37: warning: restricted __be32 degrades to integer
cxgb4_filter.c:984:37: warning: restricted __be32 degrades to integer
cxgb4_filter.c:985:37: warning: restricted __be32 degrades to integer
cxgb4_filter.c:986:37: warning: restricted __be32 degrades to integer

Fixes: 3eb8b62d5a26 ("cxgb4: add support to create hash-filters via tc-flower offload")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c
index 8a67a04a5bbc6..375e1be6a2d8d 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c
@@ -839,16 +839,16 @@ static bool is_addr_all_mask(u8 *ipmask, int family)
 		struct in_addr *addr;
 
 		addr = (struct in_addr *)ipmask;
-		if (addr->s_addr == 0xffffffff)
+		if (ntohl(addr->s_addr) == 0xffffffff)
 			return true;
 	} else if (family == AF_INET6) {
 		struct in6_addr *addr6;
 
 		addr6 = (struct in6_addr *)ipmask;
-		if (addr6->s6_addr32[0] == 0xffffffff &&
-		    addr6->s6_addr32[1] == 0xffffffff &&
-		    addr6->s6_addr32[2] == 0xffffffff &&
-		    addr6->s6_addr32[3] == 0xffffffff)
+		if (ntohl(addr6->s6_addr32[0]) == 0xffffffff &&
+		    ntohl(addr6->s6_addr32[1]) == 0xffffffff &&
+		    ntohl(addr6->s6_addr32[2]) == 0xffffffff &&
+		    ntohl(addr6->s6_addr32[3]) == 0xffffffff)
 			return true;
 	}
 	return false;
-- 
2.25.1

[PATCH 5.4 29/65] cxgb4: fix SGE queue dump destination buffer context

[Greg Kroah-Hartman]

From: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

[ Upstream commit 1992ded5d111997877a9a25205976d8d03c46814 ]

The data in destination buffer is expected to be be parsed in big
endian. So, use the right context.

Fixes following sparse warning:
cudbg_lib.c:2041:44: warning: incorrect type in assignment (different
base types)
cudbg_lib.c:2041:44:    expected unsigned long long [usertype]
cudbg_lib.c:2041:44:    got restricted __be64 [usertype]

Fixes: 736c3b94474e ("cxgb4: collect egress and ingress SGE queue contexts")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c b/drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c
index 7bcdce182ee5c..e26ae298a080a 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c
@@ -1980,7 +1980,6 @@ int cudbg_collect_dump_context(struct cudbg_init *pdbg_init,
 	u8 mem_type[CTXT_INGRESS + 1] = { 0 };
 	struct cudbg_buffer temp_buff = { 0 };
 	struct cudbg_ch_cntxt *buff;
-	u64 *dst_off, *src_off;
 	u8 *ctx_buf;
 	u8 i, k;
 	int rc;
@@ -2049,8 +2048,11 @@ int cudbg_collect_dump_context(struct cudbg_init *pdbg_init,
 		}
 
 		for (j = 0; j < max_ctx_qid; j++) {
+			__be64 *dst_off;
+			u64 *src_off;
+
 			src_off = (u64 *)(ctx_buf + j * SGE_CTXT_SIZE);
-			dst_off = (u64 *)buff->data;
+			dst_off = (__be64 *)buff->data;
 
 			/* The data is stored in 64-bit cpu order.  Convert it
 			 * to big endian before parsing.
-- 
2.25.1

[PATCH 5.4 30/65] hwmon: (max6697) Make sure the OVERT mask is set correctly

[Greg Kroah-Hartman]

From: Chu Lin <linchuyuan@google.com>

[ Upstream commit 016983d138cbe99a5c0aaae0103ee88f5300beb3 ]

Per the datasheet for max6697, OVERT mask and ALERT mask are different.
For example, the 7th bit of OVERT is the local channel but for alert
mask, the 6th bit is the local channel. Therefore, we can't apply the
same mask for both registers. In addition to that, the max6697 driver
is supposed to be compatibale with different models. I manually went over
all the listed chips and made sure all chip types have the same layout.

Testing;
    mask value of 0x9 should map to 0x44 for ALERT and 0x84 for OVERT.
    I used iotool to read the reg value back to verify. I only tested this
    change on max6581.

Reference:
https://datasheets.maximintegrated.com/en/ds/MAX6581.pdf
https://datasheets.maximintegrated.com/en/ds/MAX6697.pdf
https://datasheets.maximintegrated.com/en/ds/MAX6699.pdf

Signed-off-by: Chu Lin <linchuyuan@google.com>
Fixes: 5372d2d71c46e ("hwmon: Driver for Maxim MAX6697 and compatibles")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/max6697.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/hwmon/max6697.c b/drivers/hwmon/max6697.c
index 743752a2467a2..64122eb38060d 100644
--- a/drivers/hwmon/max6697.c
+++ b/drivers/hwmon/max6697.c
@@ -38,8 +38,9 @@ static const u8 MAX6697_REG_CRIT[] = {
  * Map device tree / platform data register bit map to chip bit map.
  * Applies to alert register and over-temperature register.
  */
-#define MAX6697_MAP_BITS(reg)	((((reg) & 0x7e) >> 1) | \
+#define MAX6697_ALERT_MAP_BITS(reg)	((((reg) & 0x7e) >> 1) | \
 				 (((reg) & 0x01) << 6) | ((reg) & 0x80))
+#define MAX6697_OVERT_MAP_BITS(reg) (((reg) >> 1) | (((reg) & 0x01) << 7))
 
 #define MAX6697_REG_STAT(n)		(0x44 + (n))
 
@@ -562,12 +563,12 @@ static int max6697_init_chip(struct max6697_data *data,
 		return ret;
 
 	ret = i2c_smbus_write_byte_data(client, MAX6697_REG_ALERT_MASK,
-					MAX6697_MAP_BITS(pdata->alert_mask));
+				MAX6697_ALERT_MAP_BITS(pdata->alert_mask));
 	if (ret < 0)
 		return ret;
 
 	ret = i2c_smbus_write_byte_data(client, MAX6697_REG_OVERT_MASK,
-				MAX6697_MAP_BITS(pdata->over_temperature_mask));
+			MAX6697_OVERT_MAP_BITS(pdata->over_temperature_mask));
 	if (ret < 0)
 		return ret;
 
-- 
2.25.1

[PATCH 5.4 31/65] hwmon: (acpi_power_meter) Fix potential memory leak in acpi_power_meter_add()

[Greg Kroah-Hartman]

From: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>

[ Upstream commit 8b97f9922211c44a739c5cbd9502ecbb9f17f6d1 ]

Although it rarely happens, we should call free_capabilities()
if error happens after read_capabilities() to free allocated strings.

Fixes: de584afa5e188 ("hwmon driver for ACPI 4.0 power meters")
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20200625043242.31175-1-misono.tomohiro@jp.fujitsu.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/acpi_power_meter.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c
index 4cf25458f0b95..740ac0a1b7265 100644
--- a/drivers/hwmon/acpi_power_meter.c
+++ b/drivers/hwmon/acpi_power_meter.c
@@ -883,7 +883,7 @@ static int acpi_power_meter_add(struct acpi_device *device)
 
 	res = setup_attrs(resource);
 	if (res)
-		goto exit_free;
+		goto exit_free_capability;
 
 	resource->hwmon_dev = hwmon_device_register(&device->dev);
 	if (IS_ERR(resource->hwmon_dev)) {
@@ -896,6 +896,8 @@ static int acpi_power_meter_add(struct acpi_device *device)
 
 exit_remove:
 	remove_attrs(resource);
+exit_free_capability:
+	free_capabilities(resource);
 exit_free:
 	kfree(resource);
 exit:
-- 
2.25.1

[PATCH 5.4 32/65] thermal/drivers/mediatek: Fix bank number settings on mt8183

[Greg Kroah-Hartman]

From: Michael Kao <michael.kao@mediatek.com>

[ Upstream commit 14533a5a6c12e8d7de79d309d4085bf186058fe1 ]

MT8183_NUM_ZONES should be set to 1
because MT8183 doesn't have multiple banks.

Fixes: a4ffe6b52d27 ("thermal: mediatek: add support for MT8183")
Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200323121537.22697-6-michael.kao@mediatek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/mtk_thermal.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index acf4854cbb8b8..d6fabd0a7da69 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -211,6 +211,9 @@ enum {
 /* The total number of temperature sensors in the MT8183 */
 #define MT8183_NUM_SENSORS	6
 
+/* The number of banks in the MT8183 */
+#define MT8183_NUM_ZONES               1
+
 /* The number of sensing points per bank */
 #define MT8183_NUM_SENSORS_PER_ZONE	 6
 
@@ -498,7 +501,7 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
 
 static const struct mtk_thermal_data mt8183_thermal_data = {
 	.auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL,
-	.num_banks = MT8183_NUM_SENSORS_PER_ZONE,
+	.num_banks = MT8183_NUM_ZONES,
 	.num_sensors = MT8183_NUM_SENSORS,
 	.vts_index = mt8183_vts_index,
 	.cali_val = MT8183_CALIBRATION,
-- 
2.25.1

[PATCH 5.4 33/65] thermal/drivers/rcar_gen3: Fix undefined temperature if negative

[Greg Kroah-Hartman]

From: Dien Pham <dien.pham.ry@renesas.com>

[ Upstream commit 5f8f06425a0dcdad7bedbb77e67f5c65ab4dacfc ]

As description for DIV_ROUND_CLOSEST in file include/linux/kernel.h.
  "Result is undefined for negative divisors if the dividend variable
   type is unsigned and for negative dividends if the divisor variable
   type is unsigned."

In current code, the FIXPT_DIV uses DIV_ROUND_CLOSEST but has not
checked sign of divisor before using. It makes undefined temperature
value in case the value is negative.

This patch fixes to satisfy DIV_ROUND_CLOSEST description
and fix bug too. Note that the variable name "reg" is not good
because it should be the same type as rcar_gen3_thermal_read().
However, it's better to rename the "reg" in a further patch as
cleanup.

Signed-off-by: Van Do <van.do.xw@renesas.com>
Signed-off-by: Dien Pham <dien.pham.ry@renesas.com>
[shimoda: minor fixes, add Fixes tag]
Fixes: 564e73d283af ("thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal driver")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Soderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Soderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1593085099-2057-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/rcar_gen3_thermal.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index 755d2b5bd2c2b..1ab2ffff4e7c7 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -169,7 +169,7 @@ static int rcar_gen3_thermal_get_temp(void *devdata, int *temp)
 {
 	struct rcar_gen3_thermal_tsc *tsc = devdata;
 	int mcelsius, val;
-	u32 reg;
+	int reg;
 
 	/* Read register and convert to mili Celsius */
 	reg = rcar_gen3_thermal_read(tsc, REG_GEN3_TEMP) & CTEMP_MASK;
-- 
2.25.1

[PATCH 5.4 34/65] kthread: save thread function

[Greg Kroah-Hartman]

From: J. Bruce Fields <bfields@redhat.com>

[ Upstream commit 52782c92ac85c4e393eb4a903a62e6c24afa633f ]

It's handy to keep the kthread_fn just as a unique cookie to identify
classes of kthreads.  E.g. if you can verify that a given task is
running your thread_fn, then you may know what sort of type kthread_data
points to.

We'll use this in nfsd to pass some information into the vfs.  Note it
will need kthread_data() exported too.

Original-patch-by: Tejun Heo <tj@kernel.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/kthread.h |  1 +
 kernel/kthread.c        | 17 +++++++++++++++++
 2 files changed, 18 insertions(+)

diff --git a/include/linux/kthread.h b/include/linux/kthread.h
index 0f9da966934e2..59bbc63ff8637 100644
--- a/include/linux/kthread.h
+++ b/include/linux/kthread.h
@@ -57,6 +57,7 @@ bool kthread_should_stop(void);
 bool kthread_should_park(void);
 bool __kthread_should_park(struct task_struct *k);
 bool kthread_freezable_should_stop(bool *was_frozen);
+void *kthread_func(struct task_struct *k);
 void *kthread_data(struct task_struct *k);
 void *kthread_probe_data(struct task_struct *k);
 int kthread_park(struct task_struct *k);
diff --git a/kernel/kthread.c b/kernel/kthread.c
index b262f47046ca4..543dff6b576c7 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -46,6 +46,7 @@ struct kthread_create_info
 struct kthread {
 	unsigned long flags;
 	unsigned int cpu;
+	int (*threadfn)(void *);
 	void *data;
 	struct completion parked;
 	struct completion exited;
@@ -152,6 +153,20 @@ bool kthread_freezable_should_stop(bool *was_frozen)
 }
 EXPORT_SYMBOL_GPL(kthread_freezable_should_stop);
 
+/**
+ * kthread_func - return the function specified on kthread creation
+ * @task: kthread task in question
+ *
+ * Returns NULL if the task is not a kthread.
+ */
+void *kthread_func(struct task_struct *task)
+{
+	if (task->flags & PF_KTHREAD)
+		return to_kthread(task)->threadfn;
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(kthread_func);
+
 /**
  * kthread_data - return data value specified on kthread creation
  * @task: kthread task in question
@@ -164,6 +179,7 @@ void *kthread_data(struct task_struct *task)
 {
 	return to_kthread(task)->data;
 }
+EXPORT_SYMBOL_GPL(kthread_data);
 
 /**
  * kthread_probe_data - speculative version of kthread_data()
@@ -237,6 +253,7 @@ static int kthread(void *_create)
 		do_exit(-ENOMEM);
 	}
 
+	self->threadfn = threadfn;
 	self->data = data;
 	init_completion(&self->exited);
 	init_completion(&self->parked);
-- 
2.25.1

[PATCH 5.4 35/65] nfsd: clients dont need to break their own delegations

[Greg Kroah-Hartman]

From: J. Bruce Fields <bfields@redhat.com>

[ Upstream commit 28df3d1539de5090f7916f6fff03891b67f366f4 ]

We currently revoke read delegations on any write open or any operation
that modifies file data or metadata (including rename, link, and
unlink).  But if the delegation in question is the only read delegation
and is held by the client performing the operation, that's not really
necessary.

It's not always possible to prevent this in the NFSv4.0 case, because
there's not always a way to determine which client an NFSv4.0 delegation
came from.  (In theory we could try to guess this from the transport
layer, e.g., by assuming all traffic on a given TCP connection comes
from the same client.  But that's not really correct.)

In the NFSv4.1 case the session layer always tells us the client.

This patch should remove such self-conflicts in all cases where we can
reliably determine the client from the compound.

To do that we need to track "who" is performing a given (possibly
lease-breaking) file operation.  We're doing that by storing the
information in the svc_rqst and using kthread_data() to map the current
task back to a svc_rqst.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/filesystems/locking.rst |  2 ++
 fs/locks.c                            |  3 +++
 fs/nfsd/nfs4proc.c                    |  2 ++
 fs/nfsd/nfs4state.c                   | 14 ++++++++++++++
 fs/nfsd/nfsd.h                        |  2 ++
 fs/nfsd/nfssvc.c                      |  6 ++++++
 include/linux/fs.h                    |  1 +
 include/linux/sunrpc/svc.h            |  1 +
 8 files changed, 31 insertions(+)

diff --git a/Documentation/filesystems/locking.rst b/Documentation/filesystems/locking.rst
index fc3a0704553cf..b5f8d15a30fb7 100644
--- a/Documentation/filesystems/locking.rst
+++ b/Documentation/filesystems/locking.rst
@@ -425,6 +425,7 @@ prototypes::
 	int (*lm_grant)(struct file_lock *, struct file_lock *, int);
 	void (*lm_break)(struct file_lock *); /* break_lease callback */
 	int (*lm_change)(struct file_lock **, int);
+	bool (*lm_breaker_owns_lease)(struct file_lock *);
 
 locking rules:
 
@@ -435,6 +436,7 @@ lm_notify:		yes		yes			no
 lm_grant:		no		no			no
 lm_break:		yes		no			no
 lm_change		yes		no			no
+lm_breaker_owns_lease:	no		no			no
 ==========		=============	=================	=========
 
 buffer_head
diff --git a/fs/locks.c b/fs/locks.c
index b8a31c1c4fff3..a3f186846e93e 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -1557,6 +1557,9 @@ static bool leases_conflict(struct file_lock *lease, struct file_lock *breaker)
 {
 	bool rc;
 
+	if (lease->fl_lmops->lm_breaker_owns_lease
+			&& lease->fl_lmops->lm_breaker_owns_lease(lease))
+		return false;
 	if ((breaker->fl_flags & FL_LAYOUT) != (lease->fl_flags & FL_LAYOUT)) {
 		rc = false;
 		goto trace;
diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c
index 4798667af647c..96fa2837d3cfb 100644
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -1961,6 +1961,8 @@ nfsd4_proc_compound(struct svc_rqst *rqstp)
 		goto encode_op;
 	}
 
+	rqstp->rq_lease_breaker = (void **)&cstate->clp;
+
 	trace_nfsd_compound(rqstp, args->opcnt);
 	while (!status && resp->opcnt < args->opcnt) {
 		op = &args->ops[resp->opcnt++];
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 8650a97e2ba96..1e8f5e281bb53 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -4464,6 +4464,19 @@ nfsd_break_deleg_cb(struct file_lock *fl)
 	return ret;
 }
 
+static bool nfsd_breaker_owns_lease(struct file_lock *fl)
+{
+	struct nfs4_delegation *dl = fl->fl_owner;
+	struct svc_rqst *rqst;
+	struct nfs4_client *clp;
+
+	if (!i_am_nfsd())
+		return NULL;
+	rqst = kthread_data(current);
+	clp = *(rqst->rq_lease_breaker);
+	return dl->dl_stid.sc_client == clp;
+}
+
 static int
 nfsd_change_deleg_cb(struct file_lock *onlist, int arg,
 		     struct list_head *dispose)
@@ -4475,6 +4488,7 @@ nfsd_change_deleg_cb(struct file_lock *onlist, int arg,
 }
 
 static const struct lock_manager_operations nfsd_lease_mng_ops = {
+	.lm_breaker_owns_lease = nfsd_breaker_owns_lease,
 	.lm_break = nfsd_break_deleg_cb,
 	.lm_change = nfsd_change_deleg_cb,
 };
diff --git a/fs/nfsd/nfsd.h b/fs/nfsd/nfsd.h
index af2947551e9ce..7a835fb7d79f7 100644
--- a/fs/nfsd/nfsd.h
+++ b/fs/nfsd/nfsd.h
@@ -87,6 +87,8 @@ int		nfsd_pool_stats_release(struct inode *, struct file *);
 
 void		nfsd_destroy(struct net *net);
 
+bool		i_am_nfsd(void);
+
 struct nfsdfs_client {
 	struct kref cl_ref;
 	void (*cl_release)(struct kref *kref);
diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c
index e8bee8ff30c59..cb7f0aa9a3b05 100644
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -590,6 +590,11 @@ static const struct svc_serv_ops nfsd_thread_sv_ops = {
 	.svo_module		= THIS_MODULE,
 };
 
+bool i_am_nfsd()
+{
+	return kthread_func(current) == nfsd;
+}
+
 int nfsd_create_serv(struct net *net)
 {
 	int error;
@@ -997,6 +1002,7 @@ nfsd_dispatch(struct svc_rqst *rqstp, __be32 *statp)
 		*statp = rpc_garbage_args;
 		return 1;
 	}
+	rqstp->rq_lease_breaker = NULL;
 	/*
 	 * Give the xdr decoder a chance to change this if it wants
 	 * (necessary in the NFSv4.0 compound case)
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 5bd384dbdca58..4b5b7667405d8 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1040,6 +1040,7 @@ struct lock_manager_operations {
 	bool (*lm_break)(struct file_lock *);
 	int (*lm_change)(struct file_lock *, int, struct list_head *);
 	void (*lm_setup)(struct file_lock *, void **);
+	bool (*lm_breaker_owns_lease)(struct file_lock *);
 };
 
 struct lock_manager {
diff --git a/include/linux/sunrpc/svc.h b/include/linux/sunrpc/svc.h
index 1afe38eb33f7e..ab6e12d9fcf61 100644
--- a/include/linux/sunrpc/svc.h
+++ b/include/linux/sunrpc/svc.h
@@ -299,6 +299,7 @@ struct svc_rqst {
 	struct net		*rq_bc_net;	/* pointer to backchannel's
 						 * net namespace
 						 */
+	void **			rq_lease_breaker; /* The v4 client breaking a lease */
 };
 
 #define SVC_NET(rqst) (rqst->rq_xprt ? rqst->rq_xprt->xpt_net : rqst->rq_bc_net)
-- 
2.25.1

[PATCH 5.4 36/65] nfsd4: fix nfsdfs reference count loop

[Greg Kroah-Hartman]

From: J. Bruce Fields <bfields@redhat.com>

[ Upstream commit 681370f4b00af0fcc65bbfb9f82de526ab7ceb0a ]

We don't drop the reference on the nfsdfs filesystem with
mntput(nn->nfsd_mnt) until nfsd_exit_net(), but that won't be called
until the nfsd module's unloaded, and we can't unload the module as long
as there's a reference on nfsdfs.  So this prevents module unloading.

Fixes: 2c830dd7209b ("nfsd: persist nfsd filesystem across mounts")
Reported-and-Tested-by:  Luo Xiaogang <lxgrxd@163.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfsd/nfs4state.c |  8 +++++++-
 fs/nfsd/nfsctl.c    | 22 ++++++++++++----------
 fs/nfsd/nfsd.h      |  3 +++
 3 files changed, 22 insertions(+), 11 deletions(-)

diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 1e8f5e281bb53..fa3dcaa82572e 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -7719,9 +7719,14 @@ nfs4_state_start_net(struct net *net)
 	struct nfsd_net *nn = net_generic(net, nfsd_net_id);
 	int ret;
 
-	ret = nfs4_state_create_net(net);
+	ret = get_nfsdfs(net);
 	if (ret)
 		return ret;
+	ret = nfs4_state_create_net(net);
+	if (ret) {
+		mntput(nn->nfsd_mnt);
+		return ret;
+	}
 	locks_start_grace(net, &nn->nfsd4_manager);
 	nfsd4_client_tracking_init(net);
 	if (nn->track_reclaim_completes && nn->reclaim_str_hashtbl_size == 0)
@@ -7790,6 +7795,7 @@ nfs4_state_shutdown_net(struct net *net)
 
 	nfsd4_client_tracking_exit(net);
 	nfs4_state_destroy_net(net);
+	mntput(nn->nfsd_mnt);
 }
 
 void
diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c
index 159feae6af8ba..596ed6a42022d 100644
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -1424,6 +1424,18 @@ static struct file_system_type nfsd_fs_type = {
 };
 MODULE_ALIAS_FS("nfsd");
 
+int get_nfsdfs(struct net *net)
+{
+	struct nfsd_net *nn = net_generic(net, nfsd_net_id);
+	struct vfsmount *mnt;
+
+	mnt =  vfs_kern_mount(&nfsd_fs_type, SB_KERNMOUNT, "nfsd", NULL);
+	if (IS_ERR(mnt))
+		return PTR_ERR(mnt);
+	nn->nfsd_mnt = mnt;
+	return 0;
+}
+
 #ifdef CONFIG_PROC_FS
 static int create_proc_exports_entry(void)
 {
@@ -1452,7 +1464,6 @@ unsigned int nfsd_net_id;
 static __net_init int nfsd_init_net(struct net *net)
 {
 	int retval;
-	struct vfsmount *mnt;
 	struct nfsd_net *nn = net_generic(net, nfsd_net_id);
 
 	retval = nfsd_export_init(net);
@@ -1479,16 +1490,8 @@ static __net_init int nfsd_init_net(struct net *net)
 	init_waitqueue_head(&nn->ntf_wq);
 	seqlock_init(&nn->boot_lock);
 
-	mnt =  vfs_kern_mount(&nfsd_fs_type, SB_KERNMOUNT, "nfsd", NULL);
-	if (IS_ERR(mnt)) {
-		retval = PTR_ERR(mnt);
-		goto out_mount_err;
-	}
-	nn->nfsd_mnt = mnt;
 	return 0;
 
-out_mount_err:
-	nfsd_reply_cache_shutdown(nn);
 out_drc_error:
 	nfsd_idmap_shutdown(net);
 out_idmap_error:
@@ -1501,7 +1504,6 @@ static __net_exit void nfsd_exit_net(struct net *net)
 {
 	struct nfsd_net *nn = net_generic(net, nfsd_net_id);
 
-	mntput(nn->nfsd_mnt);
 	nfsd_reply_cache_shutdown(nn);
 	nfsd_idmap_shutdown(net);
 	nfsd_export_shutdown(net);
diff --git a/fs/nfsd/nfsd.h b/fs/nfsd/nfsd.h
index 7a835fb7d79f7..65097324b42a0 100644
--- a/fs/nfsd/nfsd.h
+++ b/fs/nfsd/nfsd.h
@@ -89,6 +89,8 @@ void		nfsd_destroy(struct net *net);
 
 bool		i_am_nfsd(void);
 
+int get_nfsdfs(struct net *);
+
 struct nfsdfs_client {
 	struct kref cl_ref;
 	void (*cl_release)(struct kref *kref);
@@ -99,6 +101,7 @@ struct dentry *nfsd_client_mkdir(struct nfsd_net *nn,
 		struct nfsdfs_client *ncl, u32 id, const struct tree_descr *);
 void nfsd_client_rmdir(struct dentry *dentry);
 
+
 #if defined(CONFIG_NFSD_V2_ACL) || defined(CONFIG_NFSD_V3_ACL)
 #ifdef CONFIG_NFSD_V2_ACL
 extern const struct svc_version nfsd_acl_version2;
-- 
2.25.1

[PATCH 5.4 37/65] nfsd: fix nfsdfs inode reference count leak

[Greg Kroah-Hartman]

From: J. Bruce Fields <bfields@redhat.com>

[ Upstream commit bf2654017e0268cc83dc88d56f0e67ff4406631d ]

I don't understand this code well, but  I'm seeing a warning about a
still-referenced inode on unmount, and every other similar filesystem
does a dput() here.

Fixes: e8a79fb14f6b ("nfsd: add nfsd/clients directory")
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfsd/nfsctl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c
index 596ed6a42022d..be418fccc9d86 100644
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -1335,6 +1335,7 @@ void nfsd_client_rmdir(struct dentry *dentry)
 	WARN_ON_ONCE(ret);
 	fsnotify_rmdir(dir, dentry);
 	d_delete(dentry);
+	dput(dentry);
 	inode_unlock(dir);
 }
 
-- 
2.25.1

[PATCH 5.4 38/65] drm: sun4i: hdmi: Remove extra HPD polling

[Greg Kroah-Hartman]

From: Chen-Yu Tsai <wens@csie.org>

[ Upstream commit bda8eaa6dee7525f4dac950810a85a88bf6c2ba0 ]

The HPD sense mechanism in Allwinner's old HDMI encoder hardware is more
or less an input-only GPIO. Other GPIO-based HPD implementations
directly return the current state, instead of polling for a specific
state and returning the other if that times out.

Remove the I/O polling from sun4i_hdmi_connector_detect() and directly
return a known state based on the current reading. This also gets rid
of excessive CPU usage by kworker as reported on Stack Exchange [1] and
Armbian forums [2].

 [1] https://superuser.com/questions/1515001/debian-10-buster-on-cubietruck-with-bug-in-sun4i-drm-hdmi
 [2] https://forum.armbian.com/topic/14282-headless-systems-and-sun4i_drm_hdmi-a10a20/

Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629060032.24134-1-wens@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
index 9c3bdfd203373..63b4de81686ac 100644
--- a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
+++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
@@ -262,9 +262,8 @@ sun4i_hdmi_connector_detect(struct drm_connector *connector, bool force)
 	struct sun4i_hdmi *hdmi = drm_connector_to_sun4i_hdmi(connector);
 	unsigned long reg;
 
-	if (readl_poll_timeout(hdmi->base + SUN4I_HDMI_HPD_REG, reg,
-			       reg & SUN4I_HDMI_HPD_HIGH,
-			       0, 500000)) {
+	reg = readl(hdmi->base + SUN4I_HDMI_HPD_REG);
+	if (reg & SUN4I_HDMI_HPD_HIGH) {
 		cec_phys_addr_invalidate(hdmi->cec_adap);
 		return connector_status_disconnected;
 	}
-- 
2.25.1

[PATCH 5.4 39/65] virtio-blk: free vblk-vqs in error path of virtblk_probe()

[Greg Kroah-Hartman]

From: Hou Tao <houtao1@huawei.com>

[ Upstream commit e7eea44eefbdd5f0345a0a8b80a3ca1c21030d06 ]

Else there will be memory leak if alloc_disk() fails.

Fixes: 6a27b656fc02 ("block: virtio-blk: support multi virt queues per virtio-blk device")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/virtio_blk.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 0cf2fe2902307..c1de270046bfe 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -990,6 +990,7 @@ static int virtblk_probe(struct virtio_device *vdev)
 	put_disk(vblk->disk);
 out_free_vq:
 	vdev->config->del_vqs(vdev);
+	kfree(vblk->vqs);
 out_free_vblk:
 	kfree(vblk);
 out_free_index:
-- 
2.25.1

[PATCH 5.4 40/65] SMB3: Honor posix flag for multiuser mounts

[Greg Kroah-Hartman]

From: Paul Aurich <paul@darkrain42.org>

[ Upstream commit 5391b8e1b7b7e5cfa2dd4ffdc4b8c6b64dfd1866 ]

The flag from the primary tcon needs to be copied into the volume info
so that cifs_get_tcon will try to enable extensions on the per-user
tcon. At that point, since posix extensions must have already been
enabled on the superblock, don't try to needlessly adjust the mount
flags.

Fixes: ce558b0e17f8 ("smb3: Add posix create context for smb3.11 posix mounts")
Fixes: b326614ea215 ("smb3: allow "posix" mount option to enable new SMB311 protocol extensions")
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/connect.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 947c4aad5d6a4..134a90dc72322 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -5282,6 +5282,7 @@ cifs_construct_tcon(struct cifs_sb_info *cifs_sb, kuid_t fsuid)
 	vol_info->nohandlecache = master_tcon->nohandlecache;
 	vol_info->local_lease = master_tcon->local_lease;
 	vol_info->no_linux_ext = !master_tcon->unix_ext;
+	vol_info->linux_ext = master_tcon->posix_extensions;
 	vol_info->sectype = master_tcon->ses->sectype;
 	vol_info->sign = master_tcon->ses->sign;
 
@@ -5309,10 +5310,6 @@ cifs_construct_tcon(struct cifs_sb_info *cifs_sb, kuid_t fsuid)
 		goto out;
 	}
 
-	/* if new SMB3.11 POSIX extensions are supported do not remap / and \ */
-	if (tcon->posix_extensions)
-		cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_POSIX_PATHS;
-
 	if (cap_unix(ses))
 		reset_cifs_unix_caps(0, tcon, NULL, vol_info);
 
-- 
2.25.1

[PATCH 5.4 41/65] nvme: fix identify error status silent ignore

[Greg Kroah-Hartman]

From: Sagi Grimberg <sagi@grimberg.me>

[ Upstream commit ea43d9709f727e728e933a8157a7a7ca1a868281 ]

Commit 59c7c3caaaf8 intended to only silently ignore non retry-able
errors (DNR bit set) such that we can still identify misbehaving
controllers, and in the other hand propagate retry-able errors (DNR bit
cleared) so we don't wrongly abandon a namespace just because it happens
to be temporarily inaccessible.

The goal remains the same as the original commit where this was
introduced but unfortunately had the logic backwards.

Fixes: 59c7c3caaaf8 ("nvme: fix possible hang when ns scanning fails during error recovery")
Reported-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index c44c00b9e1d85..d423515547237 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -1088,10 +1088,16 @@ static int nvme_identify_ns_descs(struct nvme_ctrl *ctrl, unsigned nsid,
 		dev_warn(ctrl->device,
 			"Identify Descriptors failed (%d)\n", status);
 		 /*
-		  * Don't treat an error as fatal, as we potentially already
-		  * have a NGUID or EUI-64.
+		  * Don't treat non-retryable errors as fatal, as we potentially
+		  * already have a NGUID or EUI-64.  If we failed with DNR set,
+		  * we want to silently ignore the error as we can still
+		  * identify the device, but if the status has DNR set, we want
+		  * to propagate the error back specifically for the disk
+		  * revalidation flow to make sure we don't abandon the
+		  * device just because of a temporal retry-able error (such
+		  * as path of transport errors).
 		  */
-		if (status > 0 && !(status & NVME_SC_DNR))
+		if (status > 0 && (status & NVME_SC_DNR))
 			status = 0;
 		goto free_data;
 	}
-- 
2.25.1

[PATCH 5.4 42/65] nvme: fix a crash in nvme_mpath_add_disk

[Greg Kroah-Hartman]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 72d447113bb751ded97b2e2c38f886e4a4139082 ]

For private namespaces ns->head_disk is NULL, so add a NULL check
before updating the BDI capabilities.

Fixes: b2ce4d90690b ("nvme-multipath: set bdi capabilities once")
Reported-by: Avinash M N <Avinash.M.N@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/multipath.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index e1eeed5856570..5433aa2f76017 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -673,10 +673,11 @@ void nvme_mpath_add_disk(struct nvme_ns *ns, struct nvme_id_ns *id)
 	}
 
 	if (bdi_cap_stable_pages_required(ns->queue->backing_dev_info)) {
-		struct backing_dev_info *info =
-					ns->head->disk->queue->backing_dev_info;
+		struct gendisk *disk = ns->head->disk;
 
-		info->capabilities |= BDI_CAP_STABLE_WRITES;
+		if (disk)
+			disk->queue->backing_dev_info->capabilities |=
+					BDI_CAP_STABLE_WRITES;
 	}
 }
 
-- 
2.25.1

[PATCH 5.4 43/65] samples/vfs: avoid warning in statx override

[Greg Kroah-Hartman]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit c3eeaae9fd736b7f2afbda8d3cbb1cbae06decf3 ]

Something changed recently to uncover this warning:

  samples/vfs/test-statx.c:24:15: warning: `struct foo' declared inside parameter list will not be visible outside of this definition or declaration
     24 | #define statx foo
        |               ^~~

Which is due the use of "struct statx" (here, "struct foo") in a function
prototype argument list before it has been defined:

 int
 # 56 "/usr/include/x86_64-linux-gnu/bits/statx-generic.h"
    foo
 # 56 "/usr/include/x86_64-linux-gnu/bits/statx-generic.h" 3 4
          (int __dirfd, const char *__restrict __path, int __flags,
            unsigned int __mask, struct
 # 57 "/usr/include/x86_64-linux-gnu/bits/statx-generic.h"
                                       foo
 # 57 "/usr/include/x86_64-linux-gnu/bits/statx-generic.h" 3 4
                                             *__restrict __buf)
   __attribute__ ((__nothrow__ , __leaf__)) __attribute__ ((__nonnull__ (2, 5)));

Add explicit struct before #include to avoid warning.

Fixes: f1b5618e013a ("vfs: Add a sample program for the new mount API")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Link: http://lkml.kernel.org/r/202006282213.C516EA6@keescook
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 samples/vfs/test-statx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/samples/vfs/test-statx.c b/samples/vfs/test-statx.c
index a3d68159fb510..507f09c38b49f 100644
--- a/samples/vfs/test-statx.c
+++ b/samples/vfs/test-statx.c
@@ -23,6 +23,8 @@
 #include <linux/fcntl.h>
 #define statx foo
 #define statx_timestamp foo_timestamp
+struct statx;
+struct statx_timestamp;
 #include <sys/stat.h>
 #undef statx
 #undef statx_timestamp
-- 
2.25.1

[PATCH 5.4 44/65] i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665

[Greg Kroah-Hartman]

From: Chris Packham <chris.packham@alliedtelesis.co.nz>

[ Upstream commit cd217f2300793a106b49c7dfcbfb26e348bc7593 ]

The PCA9665 datasheet says that I2CSTA = 78h indicates that SCL is stuck
low, this differs to the PCA9564 which uses 90h for this indication.
Treat either 0x78 or 0x90 as an indication that the SCL line is stuck.

Based on looking through the PCA9564 and PCA9665 datasheets this should
be safe for both chips. The PCA9564 should not return 0x78 for any valid
state and the PCA9665 should not return 0x90.

Fixes: eff9ec95efaa ("i2c-algo-pca: Add PCA9665 support")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/algos/i2c-algo-pca.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 5ac93f41bfecf..8ea850eed18f7 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -314,7 +314,8 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
 			DEB2("BUS ERROR - SDA Stuck low\n");
 			pca_reset(adap);
 			goto out;
-		case 0x90: /* Bus error - SCL stuck low */
+		case 0x78: /* Bus error - SCL stuck low (PCA9665) */
+		case 0x90: /* Bus error - SCL stuck low (PCA9564) */
 			DEB2("BUS ERROR - SCL Stuck low\n");
 			pca_reset(adap);
 			goto out;
-- 
2.25.1

[PATCH 5.4 45/65] i2c: mlxcpld: check correct size of maximum RECV_LEN packet

[Greg Kroah-Hartman]

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

[ Upstream commit 597911287fcd13c3a4b4aa3e0a52b33d431e0a8e ]

I2C_SMBUS_BLOCK_MAX defines already the maximum number as defined in the
SMBus 2.0 specs. I don't see a reason to add 1 here. Also, fix the errno
to what is suggested for this error.

Fixes: c9bfdc7c16cb ("i2c: mlxcpld: Add support for smbus block read transaction")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Michael Shych <michaelsh@mellanox.com>
Tested-by: Michael Shych <michaelsh@mellanox.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-mlxcpld.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mlxcpld.c b/drivers/i2c/busses/i2c-mlxcpld.c
index 2fd717d8dd30e..71d7bae2cbcad 100644
--- a/drivers/i2c/busses/i2c-mlxcpld.c
+++ b/drivers/i2c/busses/i2c-mlxcpld.c
@@ -337,9 +337,9 @@ static int mlxcpld_i2c_wait_for_tc(struct mlxcpld_i2c_priv *priv)
 		if (priv->smbus_block && (val & MLXCPLD_I2C_SMBUS_BLK_BIT)) {
 			mlxcpld_i2c_read_comm(priv, MLXCPLD_LPCI2C_NUM_DAT_REG,
 					      &datalen, 1);
-			if (unlikely(datalen > (I2C_SMBUS_BLOCK_MAX + 1))) {
+			if (unlikely(datalen > I2C_SMBUS_BLOCK_MAX)) {
 				dev_err(priv->dev, "Incorrect smbus block read message len\n");
-				return -E2BIG;
+				return -EPROTO;
 			}
 		} else {
 			datalen = priv->xfer.data_len;
-- 
2.25.1

[PATCH 5.4 46/65] spi: spi-fsl-dspi: Fix external abort on interrupt in resume or exit paths

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzk@kernel.org>

commit 3d87b613d6a3c6f0980e877ab0895785a2dde581 upstream.

If shared interrupt comes late, during probe error path or device remove
(could be triggered with CONFIG_DEBUG_SHIRQ), the interrupt handler
dspi_interrupt() will access registers with the clock being disabled.
This leads to external abort on non-linefetch on Toradex Colibri VF50
module (with Vybrid VF5xx):

    $ echo 4002d000.spi > /sys/devices/platform/soc/40000000.bus/4002d000.spi/driver/unbind

    Unhandled fault: external abort on non-linefetch (0x1008) at 0x8887f02c
    Internal error: : 1008 [#1] ARM
    Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
    Backtrace:
      (regmap_mmio_read32le)
      (regmap_mmio_read)
      (_regmap_bus_reg_read)
      (_regmap_read)
      (regmap_read)
      (dspi_interrupt)
      (free_irq)
      (devm_irq_release)
      (release_nodes)
      (devres_release_all)
      (device_release_driver_internal)

The resource-managed framework should not be used for shared interrupt
handling, because the interrupt handler might be called after releasing
other resources and disabling clocks.

Similar bug could happen during suspend - the shared interrupt handler
could be invoked after suspending the device.  Each device sharing this
interrupt line should disable the IRQ during suspend so handler will be
invoked only in following cases:
1. None suspended,
2. All devices resumed.

Fixes: 349ad66c0ab0 ("spi:Add Freescale DSPI driver for Vybrid VF610 platform")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200622110543.5035-3-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/spi/spi-fsl-dspi.c |   17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -901,6 +901,8 @@ static int dspi_suspend(struct device *d
 	struct spi_controller *ctlr = dev_get_drvdata(dev);
 	struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
 
+	if (dspi->irq)
+		disable_irq(dspi->irq);
 	spi_controller_suspend(ctlr);
 	clk_disable_unprepare(dspi->clk);
 
@@ -921,6 +923,8 @@ static int dspi_resume(struct device *de
 	if (ret)
 		return ret;
 	spi_controller_resume(ctlr);
+	if (dspi->irq)
+		enable_irq(dspi->irq);
 
 	return 0;
 }
@@ -1108,8 +1112,8 @@ static int dspi_probe(struct platform_de
 		goto poll_mode;
 	}
 
-	ret = devm_request_irq(&pdev->dev, dspi->irq, dspi_interrupt,
-			       IRQF_SHARED, pdev->name, dspi);
+	ret = request_threaded_irq(dspi->irq, dspi_interrupt, NULL,
+				   IRQF_SHARED, pdev->name, dspi);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Unable to attach DSPI interrupt\n");
 		goto out_clk_put;
@@ -1122,7 +1126,7 @@ poll_mode:
 		ret = dspi_request_dma(dspi, res->start);
 		if (ret < 0) {
 			dev_err(&pdev->dev, "can't get dma channels\n");
-			goto out_clk_put;
+			goto out_free_irq;
 		}
 	}
 
@@ -1134,11 +1138,14 @@ poll_mode:
 	ret = spi_register_controller(ctlr);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Problem registering DSPI ctlr\n");
-		goto out_clk_put;
+		goto out_free_irq;
 	}
 
 	return ret;
 
+out_free_irq:
+	if (dspi->irq)
+		free_irq(dspi->irq, dspi);
 out_clk_put:
 	clk_disable_unprepare(dspi->clk);
 out_ctlr_put:
@@ -1154,6 +1161,8 @@ static int dspi_remove(struct platform_d
 
 	/* Disconnect from the SPI framework */
 	dspi_release_dma(dspi);
+	if (dspi->irq)
+		free_irq(dspi->irq, dspi);
 	clk_disable_unprepare(dspi->clk);
 	spi_unregister_controller(dspi->ctlr);
 

[PATCH 5.4 47/65] nfsd: apply umask on fs without ACL support

[Greg Kroah-Hartman]

From: J. Bruce Fields <bfields@redhat.com>

commit 22cf8419f1319ff87ec759d0ebdff4cbafaee832 upstream.

The server is failing to apply the umask when creating new objects on
filesystems without ACL support.

To reproduce this, you need to use NFSv4.2 and a client and server
recent enough to support umask, and you need to export a filesystem that
lacks ACL support (for example, ext4 with the "noacl" mount option).

Filesystems with ACL support are expected to take care of the umask
themselves (usually by calling posix_acl_create).

For filesystems without ACL support, this is up to the caller of
vfs_create(), vfs_mknod(), or vfs_mkdir().

Reported-by: Elliott Mitchell <ehem+debian@m5p.com>
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Fixes: 47057abde515 ("nfsd: add support for the umask attribute")
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfsd/vfs.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -1184,6 +1184,9 @@ nfsd_create_locked(struct svc_rqst *rqst
 		iap->ia_mode = 0;
 	iap->ia_mode = (iap->ia_mode & S_IALLUGO) | type;
 
+	if (!IS_POSIXACL(dirp))
+		iap->ia_mode &= ~current_umask();
+
 	err = 0;
 	host_err = 0;
 	switch (type) {
@@ -1416,6 +1419,9 @@ do_nfsd_create(struct svc_rqst *rqstp, s
 		goto out;
 	}
 
+	if (!IS_POSIXACL(dirp))
+		iap->ia_mode &= ~current_umask();
+
 	host_err = vfs_create(dirp, dchild, iap->ia_mode, true);
 	if (host_err < 0) {
 		fh_drop_write(fhp);

[PATCH 5.4 48/65] Revert "ALSA: usb-audio: Improve frames size computation"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit aba41867dd66939d336fdf604e4d73b805d8039f which is
commit f0bd62b64016508938df9babe47f65c2c727d25c upstream.

It causes a number of reported issues and a fix for it has not hit
Linus's tree yet.  Revert this to resolve those problems.

Cc: Alexander Tsoy <alexander@tsoy.me>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Hans de Goede <jwrdegoede@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/card.h     |    4 ----
 sound/usb/endpoint.c |   43 +++++--------------------------------------
 sound/usb/endpoint.h |    1 -
 sound/usb/pcm.c      |    2 --
 4 files changed, 5 insertions(+), 45 deletions(-)

--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -84,10 +84,6 @@ struct snd_usb_endpoint {
 	dma_addr_t sync_dma;		/* DMA address of syncbuf */
 
 	unsigned int pipe;		/* the data i/o pipe */
-	unsigned int framesize[2];	/* small/large frame sizes in samples */
-	unsigned int sample_rem;	/* remainder from division fs/fps */
-	unsigned int sample_accum;	/* sample accumulator */
-	unsigned int fps;		/* frames per second */
 	unsigned int freqn;		/* nominal sampling rate in fs/fps in Q16.16 format */
 	unsigned int freqm;		/* momentary sampling rate in fs/fps in Q16.16 format */
 	int	   freqshift;		/* how much to shift the feedback value to get Q16.16 */
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -124,12 +124,12 @@ int snd_usb_endpoint_implicit_feedback_s
 
 /*
  * For streaming based on information derived from sync endpoints,
- * prepare_outbound_urb_sizes() will call slave_next_packet_size() to
+ * prepare_outbound_urb_sizes() will call next_packet_size() to
  * determine the number of samples to be sent in the next packet.
  *
- * For implicit feedback, slave_next_packet_size() is unused.
+ * For implicit feedback, next_packet_size() is unused.
  */
-int snd_usb_endpoint_slave_next_packet_size(struct snd_usb_endpoint *ep)
+int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep)
 {
 	unsigned long flags;
 	int ret;
@@ -146,29 +146,6 @@ int snd_usb_endpoint_slave_next_packet_s
 	return ret;
 }
 
-/*
- * For adaptive and synchronous endpoints, prepare_outbound_urb_sizes()
- * will call next_packet_size() to determine the number of samples to be
- * sent in the next packet.
- */
-int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep)
-{
-	int ret;
-
-	if (ep->fill_max)
-		return ep->maxframesize;
-
-	ep->sample_accum += ep->sample_rem;
-	if (ep->sample_accum >= ep->fps) {
-		ep->sample_accum -= ep->fps;
-		ret = ep->framesize[1];
-	} else {
-		ret = ep->framesize[0];
-	}
-
-	return ret;
-}
-
 static void retire_outbound_urb(struct snd_usb_endpoint *ep,
 				struct snd_urb_ctx *urb_ctx)
 {
@@ -213,8 +190,6 @@ static void prepare_silent_urb(struct sn
 
 		if (ctx->packet_size[i])
 			counts = ctx->packet_size[i];
-		else if (ep->sync_master)
-			counts = snd_usb_endpoint_slave_next_packet_size(ep);
 		else
 			counts = snd_usb_endpoint_next_packet_size(ep);
 
@@ -1086,17 +1061,10 @@ int snd_usb_endpoint_set_params(struct s
 	ep->maxpacksize = fmt->maxpacksize;
 	ep->fill_max = !!(fmt->attributes & UAC_EP_CS_ATTR_FILL_MAX);
 
-	if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_FULL) {
+	if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_FULL)
 		ep->freqn = get_usb_full_speed_rate(rate);
-		ep->fps = 1000;
-	} else {
+	else
 		ep->freqn = get_usb_high_speed_rate(rate);
-		ep->fps = 8000;
-	}
-
-	ep->sample_rem = rate % ep->fps;
-	ep->framesize[0] = rate / ep->fps;
-	ep->framesize[1] = (rate + (ep->fps - 1)) / ep->fps;
 
 	/* calculate the frequency in 16.16 format */
 	ep->freqm = ep->freqn;
@@ -1155,7 +1123,6 @@ int snd_usb_endpoint_start(struct snd_us
 	ep->active_mask = 0;
 	ep->unlink_mask = 0;
 	ep->phase = 0;
-	ep->sample_accum = 0;
 
 	snd_usb_endpoint_start_quirk(ep);
 
--- a/sound/usb/endpoint.h
+++ b/sound/usb/endpoint.h
@@ -28,7 +28,6 @@ void snd_usb_endpoint_release(struct snd
 void snd_usb_endpoint_free(struct snd_usb_endpoint *ep);
 
 int snd_usb_endpoint_implicit_feedback_sink(struct snd_usb_endpoint *ep);
-int snd_usb_endpoint_slave_next_packet_size(struct snd_usb_endpoint *ep);
 int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep);
 
 void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep,
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -1581,8 +1581,6 @@ static void prepare_playback_urb(struct
 	for (i = 0; i < ctx->packets; i++) {
 		if (ctx->packet_size[i])
 			counts = ctx->packet_size[i];
-		else if (ep->sync_master)
-			counts = snd_usb_endpoint_slave_next_packet_size(ep);
 		else
 			counts = snd_usb_endpoint_next_packet_size(ep);
 

[PATCH 5.4 49/65] SMB3: Honor seal flag for multiuser mounts

[Greg Kroah-Hartman]

From: Paul Aurich <paul@darkrain42.org>

commit cc15461c73d7d044d56c47e869a215e49bd429c8 upstream.

Ensure multiuser SMB3 mounts use encryption for all users' tcons if the
mount options are configured to require encryption. Without this, only
the primary tcon and IPC tcons are guaranteed to be encrypted. Per-user
tcons would only be encrypted if the server was configured to require
encryption.

Signed-off-by: Paul Aurich <paul@darkrain42.org>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/connect.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -5285,6 +5285,7 @@ cifs_construct_tcon(struct cifs_sb_info
 	vol_info->linux_ext = master_tcon->posix_extensions;
 	vol_info->sectype = master_tcon->ses->sectype;
 	vol_info->sign = master_tcon->ses->sign;
+	vol_info->seal = master_tcon->seal;
 
 	rc = cifs_set_vol_auth(vol_info, master_tcon->ses);
 	if (rc) {

[PATCH 5.4 50/65] SMB3: Honor persistent/resilient handle flags for multiuser mounts

[Greg Kroah-Hartman]

From: Paul Aurich <paul@darkrain42.org>

commit 00dfbc2f9c61185a2e662f27c45a0bb29b2a134f upstream.

Without this:

- persistent handles will only be enabled for per-user tcons if the
  server advertises the 'Continuous Availabity' capability
- resilient handles would never be enabled for per-user tcons

Signed-off-by: Paul Aurich <paul@darkrain42.org>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/connect.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -5281,6 +5281,8 @@ cifs_construct_tcon(struct cifs_sb_info
 	vol_info->nocase = master_tcon->nocase;
 	vol_info->nohandlecache = master_tcon->nohandlecache;
 	vol_info->local_lease = master_tcon->local_lease;
+	vol_info->resilient = master_tcon->use_resilient;
+	vol_info->persistent = master_tcon->use_persistent;
 	vol_info->no_linux_ext = !master_tcon->unix_ext;
 	vol_info->linux_ext = master_tcon->posix_extensions;
 	vol_info->sectype = master_tcon->ses->sectype;

[PATCH 5.4 51/65] SMB3: Honor lease disabling for multiuser mounts

[Greg Kroah-Hartman]

From: Paul Aurich <paul@darkrain42.org>

commit ad35f169db6cd5a4c5c0a5a42fb0cad3efeccb83 upstream.

Fixes: 3e7a02d47872 ("smb3: allow disabling requesting leases")
Signed-off-by: Paul Aurich <paul@darkrain42.org>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/connect.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -5281,6 +5281,7 @@ cifs_construct_tcon(struct cifs_sb_info
 	vol_info->nocase = master_tcon->nocase;
 	vol_info->nohandlecache = master_tcon->nohandlecache;
 	vol_info->local_lease = master_tcon->local_lease;
+	vol_info->no_lease = master_tcon->no_lease;
 	vol_info->resilient = master_tcon->use_resilient;
 	vol_info->persistent = master_tcon->use_persistent;
 	vol_info->no_linux_ext = !master_tcon->unix_ext;

[PATCH 5.4 52/65] SMB3: Honor handletimeout flag for multiuser mounts

[Greg Kroah-Hartman]

From: Paul Aurich <paul@darkrain42.org>

commit 6b356f6cf941d5054d7fab072cae4a5f8658e3db upstream.

Fixes: ca567eb2b3f0 ("SMB3: Allow persistent handle timeout to be configurable on mount")
Signed-off-by: Paul Aurich <paul@darkrain42.org>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/connect.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -5284,6 +5284,7 @@ cifs_construct_tcon(struct cifs_sb_info
 	vol_info->no_lease = master_tcon->no_lease;
 	vol_info->resilient = master_tcon->use_resilient;
 	vol_info->persistent = master_tcon->use_persistent;
+	vol_info->handle_timeout = master_tcon->handle_timeout;
 	vol_info->no_linux_ext = !master_tcon->unix_ext;
 	vol_info->linux_ext = master_tcon->posix_extensions;
 	vol_info->sectype = master_tcon->ses->sectype;

[PATCH 5.4 53/65] cifs: Fix the target file was deleted when rename failed.

[Greg Kroah-Hartman]

From: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>

commit 9ffad9263b467efd8f8dc7ae1941a0a655a2bab2 upstream.

When xfstest generic/035, we found the target file was deleted
if the rename return -EACESS.

In cifs_rename2, we unlink the positive target dentry if rename
failed with EACESS or EEXIST, even if the target dentry is positived
before rename. Then the existing file was deleted.

We should just delete the target file which created during the
rename.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/inode.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -1791,6 +1791,7 @@ cifs_rename2(struct inode *source_dir, s
 	FILE_UNIX_BASIC_INFO *info_buf_target;
 	unsigned int xid;
 	int rc, tmprc;
+	bool new_target = d_really_is_negative(target_dentry);
 
 	if (flags & ~RENAME_NOREPLACE)
 		return -EINVAL;
@@ -1867,8 +1868,13 @@ cifs_rename2(struct inode *source_dir, s
 	 */
 
 unlink_target:
-	/* Try unlinking the target dentry if it's not negative */
-	if (d_really_is_positive(target_dentry) && (rc == -EACCES || rc == -EEXIST)) {
+	/*
+	 * If the target dentry was created during the rename, try
+	 * unlinking it if it's not negative
+	 */
+	if (new_target &&
+	    d_really_is_positive(target_dentry) &&
+	    (rc == -EACCES || rc == -EEXIST)) {
 		if (d_is_dir(target_dentry))
 			tmprc = cifs_rmdir(target_dir, target_dentry);
 		else

[PATCH 5.4 54/65] MIPS: lantiq: xway: sysctrl: fix the GPHY clock alias names

[Greg Kroah-Hartman]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

commit 03e62fd67d3ab33f39573fc8787d89dc9b4d7255 upstream.

The dt-bindings for the GSWIP describe that the node should be named
"switch". Use the same name in sysctrl.c so the GSWIP driver can
actually find the "gphy0" and "gphy1" clocks.

Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/lantiq/xway/sysctrl.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -514,8 +514,8 @@ void __init ltq_soc_init(void)
 		clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, PMU_SWITCH |
 			       PMU_PPE_DP | PMU_PPE_TC);
 		clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
-		clkdev_add_pmu("1e108000.gswip", "gphy0", 0, 0, PMU_GPHY);
-		clkdev_add_pmu("1e108000.gswip", "gphy1", 0, 0, PMU_GPHY);
+		clkdev_add_pmu("1e108000.switch", "gphy0", 0, 0, PMU_GPHY);
+		clkdev_add_pmu("1e108000.switch", "gphy1", 0, 0, PMU_GPHY);
 		clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
 		clkdev_add_pmu("1e116000.mei", "afe", 1, 2, PMU_ANALOG_DSL_AFE);
 		clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
@@ -538,8 +538,8 @@ void __init ltq_soc_init(void)
 				PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
 				PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
 				PMU_PPE_QSB | PMU_PPE_TOP);
-		clkdev_add_pmu("1e108000.gswip", "gphy0", 0, 0, PMU_GPHY);
-		clkdev_add_pmu("1e108000.gswip", "gphy1", 0, 0, PMU_GPHY);
+		clkdev_add_pmu("1e108000.switch", "gphy0", 0, 0, PMU_GPHY);
+		clkdev_add_pmu("1e108000.switch", "gphy1", 0, 0, PMU_GPHY);
 		clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
 		clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
 		clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);

[PATCH 5.4 55/65] MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen

[Greg Kroah-Hartman]

From: Hauke Mehrtens <hauke@hauke-m.de>

commit fcec538ef8cca0ad0b84432235dccd9059c8e6f8 upstream.

This resolves the hazard between the mtc0 in the change_c0_status() and
the mfc0 in configure_exception_vector(). Without resolving this hazard
configure_exception_vector() could read an old value and would restore
this old value again. This would revert the changes change_c0_status()
did. I checked this by printing out the read_c0_status() at the end of
per_cpu_trap_init() and the ST0_MX is not set without this patch.

The hazard is documented in the MIPS Architecture Reference Manual Vol.
III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev
6.03 table 8.1 which includes:

   Producer | Consumer | Hazard
  ----------|----------|----------------------------
   mtc0     | mfc0     | any coprocessor 0 register

I saw this hazard on an Atheros AR9344 rev 2 SoC with a MIPS 74Kc CPU.
There the change_c0_status() function would activate the DSPen by
setting ST0_MX in the c0_status register. This was reverted and then the
system got a DSP exception when the DSP registers were saved in
save_dsp() in the first process switch. The crash looks like this:

[    0.089999] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.097796] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.107070] Kernel panic - not syncing: Unexpected DSP exception
[    0.113470] Rebooting in 1 seconds..

We saw this problem in OpenWrt only on the MIPS 74Kc based Atheros SoCs,
not on the 24Kc based SoCs. We only saw it with kernel 5.4 not with
kernel 4.19, in addition we had to use GCC 8.4 or 9.X, with GCC 8.3 it
did not happen.

In the kernel I bisected this problem to commit 9012d011660e ("compiler:
allow all arches to enable CONFIG_OPTIMIZE_INLINING"), but when this was
reverted it also happened after commit 172dcd935c34b ("MIPS: Always
allocate exception vector for MIPSr2+").

Commit 0b24cae4d535 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.")
does similar changes to a different file. I am not sure if there are
more places affected by this problem.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/traps.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -2126,6 +2126,7 @@ static void configure_status(void)
 
 	change_c0_status(ST0_CU|ST0_MX|ST0_RE|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
 			 status_set);
+	back_to_back_c0_hazard();
 }
 
 unsigned int hwrena;

[PATCH 5.4 56/65] drm/amd/display: Only revalidate bandwidth on medium and fast updates

[Greg Kroah-Hartman]

From: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>

commit 6eb3cf2e06d22b2b08e6b0ab48cb9c05a8e1a107 upstream.

[Why]
Changes that are fast don't require updating DLG parameters making
this call unnecessary. Considering this is an expensive call it should
not be done on every flip.

DML touches clocks, p-state support, DLG params and a few other DC
internal flags and these aren't expected during fast. A hang has been
reported with this change when called on every flip which suggests that
modifying these fields is not recommended behavior on fast updates.

[How]
Guard the validation to only happen if update type isn't FAST.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1191
Fixes: a24eaa5c51255b ("drm/amd/display: Revalidate bandwidth before commiting DC updates")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/amd/display/dc/core/dc.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -2226,10 +2226,12 @@ void dc_commit_updates_for_stream(struct
 
 	copy_stream_update_to_stream(dc, context, stream, stream_update);
 
-	if (!dc->res_pool->funcs->validate_bandwidth(dc, context, false)) {
-		DC_ERROR("Mode validation failed for stream update!\n");
-		dc_release_state(context);
-		return;
+	if (update_type > UPDATE_TYPE_FAST) {
+		if (!dc->res_pool->funcs->validate_bandwidth(dc, context, false)) {
+			DC_ERROR("Mode validation failed for stream update!\n");
+			dc_release_state(context);
+			return;
+		}
 	}
 
 	commit_planes_for_stream(

[PATCH 5.4 57/65] drm/amdgpu: use %u rather than %d for sclk/mclk

[Greg Kroah-Hartman]

From: Alex Deucher <alexander.deucher@amd.com>

commit beaf10efca64ac824240838ab1f054dfbefab5e6 upstream.

Large clock values may overflow and show up as negative.

Reported by prOMiNd on IRC.

Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
@@ -2101,7 +2101,7 @@ static ssize_t amdgpu_hwmon_show_sclk(st
 	if (r)
 		return r;
 
-	return snprintf(buf, PAGE_SIZE, "%d\n", sclk * 10 * 1000);
+	return snprintf(buf, PAGE_SIZE, "%u\n", sclk * 10 * 1000);
 }
 
 static ssize_t amdgpu_hwmon_show_sclk_label(struct device *dev,
@@ -2131,7 +2131,7 @@ static ssize_t amdgpu_hwmon_show_mclk(st
 	if (r)
 		return r;
 
-	return snprintf(buf, PAGE_SIZE, "%d\n", mclk * 10 * 1000);
+	return snprintf(buf, PAGE_SIZE, "%u\n", mclk * 10 * 1000);
 }
 
 static ssize_t amdgpu_hwmon_show_mclk_label(struct device *dev,

[PATCH 5.4 58/65] drm/amdgpu/atomfirmware: fix vram_info fetching for renoir

[Greg Kroah-Hartman]

From: Alex Deucher <alexander.deucher@amd.com>

commit d7a6634a4cfba073ff6a526cb4265d6e58ece234 upstream.

Renoir uses integrated_system_info table v12.  The table
has the same layout as v11 with respect to this data.  Just
reuse the existing code for v12 for stable.

Fixes incorrectly reported vram info in the driver output.

Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_atomfirmware.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_atomfirmware.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_atomfirmware.c
@@ -150,6 +150,7 @@ int amdgpu_atomfirmware_get_vram_width(s
 				(mode_info->atom_context->bios + data_offset);
 			switch (crev) {
 			case 11:
+			case 12:
 				mem_channel_number = igp_info->v11.umachannelnumber;
 				/* channel width is 64 */
 				return mem_channel_number * 64;

[PATCH 5.4 59/65] dma-buf: Move dma_buf_release() from fops to dentry_ops

[Greg Kroah-Hartman]

From: Sumit Semwal <sumit.semwal@linaro.org>

commit 4ab59c3c638c6c8952bf07739805d20eb6358a4d upstream.

Charan Teja reported a 'use-after-free' in dmabuffs_dname [1], which
happens if the dma_buf_release() is called while the userspace is
accessing the dma_buf pseudo fs's dmabuffs_dname() in another process,
and dma_buf_release() releases the dmabuf object when the last reference
to the struct file goes away.

I discussed with Arnd Bergmann, and he suggested that rather than tying
the dma_buf_release() to the file_operations' release(), we can tie it to
the dentry_operations' d_release(), which will be called when the last ref
to the dentry is removed.

The path exercised by __fput() calls f_op->release() first, and then calls
dput, which eventually calls d_op->d_release().

In the 'normal' case, when no userspace access is happening via dma_buf
pseudo fs, there should be exactly one fd, file, dentry and inode, so
closing the fd will kill of everything right away.

In the presented case, the dentry's d_release() will be called only when
the dentry's last ref is released.

Therefore, lets move dma_buf_release() from fops->release() to
d_ops->d_release()

Many thanks to Arnd for his FS insights :)

[1]: https://lore.kernel.org/patchwork/patch/1238278/

Fixes: bb2bb9030425 ("dma-buf: add DMA_BUF_SET_NAME ioctls")
Reported-by: syzbot+3643a18836bce555bff6@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org> [5.3+]
Cc: Arnd Bergmann <arnd@arndb.de>
Reported-by: Charan Teja Reddy <charante@codeaurora.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Tested-by: Charan Teja Reddy <charante@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200611114418.19852-1-sumit.semwal@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/dma-buf/dma-buf.c |   54 +++++++++++++++++++++-------------------------
 1 file changed, 25 insertions(+), 29 deletions(-)

--- a/drivers/dma-buf/dma-buf.c
+++ b/drivers/dma-buf/dma-buf.c
@@ -54,37 +54,11 @@ static char *dmabuffs_dname(struct dentr
 			     dentry->d_name.name, ret > 0 ? name : "");
 }
 
-static const struct dentry_operations dma_buf_dentry_ops = {
-	.d_dname = dmabuffs_dname,
-};
-
-static struct vfsmount *dma_buf_mnt;
-
-static int dma_buf_fs_init_context(struct fs_context *fc)
-{
-	struct pseudo_fs_context *ctx;
-
-	ctx = init_pseudo(fc, DMA_BUF_MAGIC);
-	if (!ctx)
-		return -ENOMEM;
-	ctx->dops = &dma_buf_dentry_ops;
-	return 0;
-}
-
-static struct file_system_type dma_buf_fs_type = {
-	.name = "dmabuf",
-	.init_fs_context = dma_buf_fs_init_context,
-	.kill_sb = kill_anon_super,
-};
-
-static int dma_buf_release(struct inode *inode, struct file *file)
+static void dma_buf_release(struct dentry *dentry)
 {
 	struct dma_buf *dmabuf;
 
-	if (!is_dma_buf_file(file))
-		return -EINVAL;
-
-	dmabuf = file->private_data;
+	dmabuf = dentry->d_fsdata;
 
 	BUG_ON(dmabuf->vmapping_counter);
 
@@ -110,9 +84,32 @@ static int dma_buf_release(struct inode
 	module_put(dmabuf->owner);
 	kfree(dmabuf->name);
 	kfree(dmabuf);
+}
+
+static const struct dentry_operations dma_buf_dentry_ops = {
+	.d_dname = dmabuffs_dname,
+	.d_release = dma_buf_release,
+};
+
+static struct vfsmount *dma_buf_mnt;
+
+static int dma_buf_fs_init_context(struct fs_context *fc)
+{
+	struct pseudo_fs_context *ctx;
+
+	ctx = init_pseudo(fc, DMA_BUF_MAGIC);
+	if (!ctx)
+		return -ENOMEM;
+	ctx->dops = &dma_buf_dentry_ops;
 	return 0;
 }
 
+static struct file_system_type dma_buf_fs_type = {
+	.name = "dmabuf",
+	.init_fs_context = dma_buf_fs_init_context,
+	.kill_sb = kill_anon_super,
+};
+
 static int dma_buf_mmap_internal(struct file *file, struct vm_area_struct *vma)
 {
 	struct dma_buf *dmabuf;
@@ -412,7 +409,6 @@ static void dma_buf_show_fdinfo(struct s
 }
 
 static const struct file_operations dma_buf_fops = {
-	.release	= dma_buf_release,
 	.mmap		= dma_buf_mmap_internal,
 	.llseek		= dma_buf_llseek,
 	.poll		= dma_buf_poll,

[PATCH 5.4 60/65] irqchip/gic: Atomically update affinity

[Greg Kroah-Hartman]

From: Marc Zyngier <maz@kernel.org>

commit 005c34ae4b44f085120d7f371121ec7ded677761 upstream.

The GIC driver uses a RMW sequence to update the affinity, and
relies on the gic_lock_irqsave/gic_unlock_irqrestore sequences
to update it atomically.

But these sequences only expand into anything meaningful if
the BL_SWITCHER option is selected, which almost never happens.

It also turns out that using a RMW and locks is just as silly,
as the GIC distributor supports byte accesses for the GICD_TARGETRn
registers, which when used make the update atomic by definition.

Drop the terminally broken code and replace it by a byte write.

Fixes: 04c8b0f82c7d ("irqchip/gic: Make locking a BL_SWITCHER only feature")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/irqchip/irq-gic.c |   14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -329,10 +329,8 @@ static int gic_irq_set_vcpu_affinity(str
 static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
 			    bool force)
 {
-	void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3);
-	unsigned int cpu, shift = (gic_irq(d) % 4) * 8;
-	u32 val, mask, bit;
-	unsigned long flags;
+	void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + gic_irq(d);
+	unsigned int cpu;
 
 	if (!force)
 		cpu = cpumask_any_and(mask_val, cpu_online_mask);
@@ -342,13 +340,7 @@ static int gic_set_affinity(struct irq_d
 	if (cpu >= NR_GIC_CPU_IF || cpu >= nr_cpu_ids)
 		return -EINVAL;
 
-	gic_lock_irqsave(flags);
-	mask = 0xff << shift;
-	bit = gic_cpu_map[cpu] << shift;
-	val = readl_relaxed(reg) & ~mask;
-	writel_relaxed(val | bit, reg);
-	gic_unlock_irqrestore(flags);
-
+	writeb_relaxed(gic_cpu_map[cpu], reg);
 	irq_data_update_effective_affinity(d, cpumask_of(cpu));
 
 	return IRQ_SET_MASK_OK_DONE;

[PATCH 5.4 61/65] mm, compaction: fully assume capture is not NULL in compact_zone_order()

[Greg Kroah-Hartman]

From: Vlastimil Babka <vbabka@suse.cz>

commit 6467552ca64c4ddd2b83ed73192107d7145f533b upstream.

Dan reports:

The patch 5e1f0f098b46: "mm, compaction: capture a page under direct
compaction" from Mar 5, 2019, leads to the following Smatch complaint:

    mm/compaction.c:2321 compact_zone_order()
     error: we previously assumed 'capture' could be null (see line 2313)

mm/compaction.c
  2288  static enum compact_result compact_zone_order(struct zone *zone, int order,
  2289                  gfp_t gfp_mask, enum compact_priority prio,
  2290                  unsigned int alloc_flags, int classzone_idx,
  2291                  struct page **capture)
                                      ^^^^^^^

  2313		if (capture)
                    ^^^^^^^
Check for NULL

  2314			current->capture_control = &capc;
  2315
  2316		ret = compact_zone(&cc, &capc);
  2317
  2318		VM_BUG_ON(!list_empty(&cc.freepages));
  2319		VM_BUG_ON(!list_empty(&cc.migratepages));
  2320
  2321		*capture = capc.page;
                ^^^^^^^^
Unchecked dereference.

  2322		current->capture_control = NULL;
  2323

In practice this is not an issue, as the only caller path passes non-NULL
capture:

__alloc_pages_direct_compact()
  struct page *page = NULL;
  try_to_compact_pages(capture = &page);
    compact_zone_order(capture = capture);

So let's remove the unnecessary check, which should also make Smatch happy.

Fixes: 5e1f0f098b46 ("mm, compaction: capture a page under direct compaction")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: http://lkml.kernel.org/r/18b0df3c-0589-d96c-23fa-040798fee187@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/compaction.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/mm/compaction.c
+++ b/mm/compaction.c
@@ -2310,8 +2310,7 @@ static enum compact_result compact_zone_
 		.page = NULL,
 	};
 
-	if (capture)
-		current->capture_control = &capc;
+	current->capture_control = &capc;
 
 	ret = compact_zone(&cc, &capc);
 
@@ -2333,6 +2332,7 @@ int sysctl_extfrag_threshold = 500;
  * @alloc_flags: The allocation flags of the current allocation
  * @ac: The context of current allocation
  * @prio: Determines how hard direct compaction should try to succeed
+ * @capture: Pointer to free page created by compaction will be stored here
  *
  * This is the main entry point for direct page compaction.
  */

[PATCH 5.4 62/65] mm, compaction: make capture control handling safe wrt interrupts

[Greg Kroah-Hartman]

From: Vlastimil Babka <vbabka@suse.cz>

commit b9e20f0da1f5c9c68689450a8cb436c9486434c8 upstream.

Hugh reports:

 "While stressing compaction, one run oopsed on NULL capc->cc in
  __free_one_page()'s task_capc(zone): compact_zone_order() had been
  interrupted, and a page was being freed in the return from interrupt.

  Though you would not expect it from the source, both gccs I was using
  (4.8.1 and 7.5.0) had chosen to compile compact_zone_order() with the
  ".cc = &cc" implemented by mov %rbx,-0xb0(%rbp) immediately before
  callq compact_zone - long after the "current->capture_control =
  &capc". An interrupt in between those finds capc->cc NULL (zeroed by
  an earlier rep stos).

  This could presumably be fixed by a barrier() before setting
  current->capture_control in compact_zone_order(); but would also need
  more care on return from compact_zone(), in order not to risk leaking
  a page captured by interrupt just before capture_control is reset.

  Maybe that is the preferable fix, but I felt safer for task_capc() to
  exclude the rather surprising possibility of capture at interrupt
  time"

I have checked that gcc10 also behaves the same.

The advantage of fix in compact_zone_order() is that we don't add
another test in the page freeing hot path, and that it might prevent
future problems if we stop exposing pointers to uninitialized structures
in current task.

So this patch implements the suggestion for compact_zone_order() with
barrier() (and WRITE_ONCE() to prevent store tearing) for setting
current->capture_control, and prevents page leaking with
WRITE_ONCE/READ_ONCE in the proper order.

Link: http://lkml.kernel.org/r/20200616082649.27173-1-vbabka@suse.cz
Fixes: 5e1f0f098b46 ("mm, compaction: capture a page under direct compaction")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Hugh Dickins <hughd@google.com>
Suggested-by: Hugh Dickins <hughd@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Li Wang <liwang@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>	[5.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/compaction.c |   17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

--- a/mm/compaction.c
+++ b/mm/compaction.c
@@ -2310,15 +2310,26 @@ static enum compact_result compact_zone_
 		.page = NULL,
 	};
 
-	current->capture_control = &capc;
+	/*
+	 * Make sure the structs are really initialized before we expose the
+	 * capture control, in case we are interrupted and the interrupt handler
+	 * frees a page.
+	 */
+	barrier();
+	WRITE_ONCE(current->capture_control, &capc);
 
 	ret = compact_zone(&cc, &capc);
 
 	VM_BUG_ON(!list_empty(&cc.freepages));
 	VM_BUG_ON(!list_empty(&cc.migratepages));
 
-	*capture = capc.page;
-	current->capture_control = NULL;
+	/*
+	 * Make sure we hide capture control first before we read the captured
+	 * page pointer, otherwise an interrupt could free and capture a page
+	 * and we would leak it.
+	 */
+	WRITE_ONCE(current->capture_control, NULL);
+	*capture = READ_ONCE(capc.page);
 
 	return ret;
 }

[PATCH 5.4 63/65] x86/resctrl: Fix memory bandwidth counter width for AMD

[Greg Kroah-Hartman]

From: Babu Moger <babu.moger@amd.com>

commit 2c18bd525c47f882f033b0a813ecd09c93e1ecdf upstream.

Memory bandwidth is calculated reading the monitoring counter
at two intervals and calculating the delta. It is the software’s
responsibility to read the count often enough to avoid having
the count roll over _twice_ between reads.

The current code hardcodes the bandwidth monitoring counter's width
to 24 bits for AMD. This is due to default base counter width which
is 24. Currently, AMD does not implement the CPUID 0xF.[ECX=1]:EAX
to adjust the counter width. But, the AMD hardware supports much
wider bandwidth counter with the default width of 44 bits.

Kernel reads these monitoring counters every 1 second and adjusts the
counter value for overflow. With 24 bits and scale value of 64 for AMD,
it can only measure up to 1GB/s without overflowing. For the rates
above 1GB/s this will fail to measure the bandwidth.

Fix the issue setting the default width to 44 bits by adjusting the
offset.

AMD future products will implement CPUID 0xF.[ECX=1]:EAX.

 [ bp: Let the line stick out and drop {}-brackets around a single
   statement. ]

Fixes: 4d05bf71f157 ("x86/resctrl: Introduce AMD QOS feature")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/159129975546.62538.5656031125604254041.stgit@naples-babu.amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 arch/x86/kernel/cpu/resctrl/core.c     |    2 ++
 arch/x86/kernel/cpu/resctrl/internal.h |    3 +++
 arch/x86/kernel/cpu/resctrl/monitor.c  |    3 ++-
 3 files changed, 7 insertions(+), 1 deletion(-)

--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -260,6 +260,7 @@ static bool __get_mem_config_intel(struc
 	r->num_closid = edx.split.cos_max + 1;
 	r->membw.max_delay = eax.split.max_delay + 1;
 	r->default_ctrl = MAX_MBA_BW;
+	r->membw.mbm_width = MBM_CNTR_WIDTH;
 	if (ecx & MBA_IS_LINEAR) {
 		r->membw.delay_linear = true;
 		r->membw.min_bw = MAX_MBA_BW - r->membw.max_delay;
@@ -289,6 +290,7 @@ static bool __rdt_get_mem_config_amd(str
 	/* AMD does not use delay */
 	r->membw.delay_linear = false;
 
+	r->membw.mbm_width = MBM_CNTR_WIDTH_AMD;
 	r->membw.min_bw = 0;
 	r->membw.bw_gran = 1;
 	/* Max value is 2048, Data width should be 4 in decimal */
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -32,6 +32,7 @@
 #define CQM_LIMBOCHECK_INTERVAL	1000
 
 #define MBM_CNTR_WIDTH			24
+#define MBM_CNTR_WIDTH_AMD		44
 #define MBM_OVERFLOW_INTERVAL		1000
 #define MAX_MBA_BW			100u
 #define MBA_IS_LINEAR			0x4
@@ -368,6 +369,7 @@ struct rdt_cache {
  * @min_bw:		Minimum memory bandwidth percentage user can request
  * @bw_gran:		Granularity at which the memory bandwidth is allocated
  * @delay_linear:	True if memory B/W delay is in linear scale
+ * @mbm_width:		memory B/W monitor counter width
  * @mba_sc:		True if MBA software controller(mba_sc) is enabled
  * @mb_map:		Mapping of memory B/W percentage to memory B/W delay
  */
@@ -376,6 +378,7 @@ struct rdt_membw {
 	u32		min_bw;
 	u32		bw_gran;
 	u32		delay_linear;
+	u32		mbm_width;
 	bool		mba_sc;
 	u32		*mb_map;
 };
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -216,8 +216,9 @@ void free_rmid(u32 rmid)
 
 static u64 mbm_overflow_count(u64 prev_msr, u64 cur_msr)
 {
-	u64 shift = 64 - MBM_CNTR_WIDTH, chunks;
+	u64 shift, chunks;
 
+	shift = 64 - rdt_resources_all[RDT_RESOURCE_MBA].membw.mbm_width;
 	chunks = (cur_msr << shift) - (prev_msr << shift);
 	return chunks >>= shift;
 }

[PATCH 5.4 64/65] dm zoned: assign max_io_len correctly

[Greg Kroah-Hartman]

From: Hou Tao <houtao1@huawei.com>

commit 7b2377486767503d47265e4d487a63c651f6b55d upstream.

The unit of max_io_len is sector instead of byte (spotted through
code review), so fix it.

Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/md/dm-zoned-target.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/md/dm-zoned-target.c
+++ b/drivers/md/dm-zoned-target.c
@@ -790,7 +790,7 @@ static int dmz_ctr(struct dm_target *ti,
 	}
 
 	/* Set target (no write same support) */
-	ti->max_io_len = dev->zone_nr_sectors << 9;
+	ti->max_io_len = dev->zone_nr_sectors;
 	ti->num_flush_bios = 1;
 	ti->num_discard_bios = 1;
 	ti->num_write_zeroes_bios = 1;

[PATCH 5.4 65/65] efi: Make it possible to disable efivar_ssdt entirely

[Greg Kroah-Hartman]

From: Peter Jones <pjones@redhat.com>

commit 435d1a471598752446a72ad1201b3c980526d869 upstream.

In most cases, such as CONFIG_ACPI_CUSTOM_DSDT and
CONFIG_ACPI_TABLE_UPGRADE, boot-time modifications to firmware tables
are tied to specific Kconfig options.  Currently this is not the case
for modifying the ACPI SSDT via the efivar_ssdt kernel command line
option and associated EFI variable.

This patch adds CONFIG_EFI_CUSTOM_SSDT_OVERLAYS, which defaults
disabled, in order to allow enabling or disabling that feature during
the build.

Cc: <stable@vger.kernel.org>
Signed-off-by: Peter Jones <pjones@redhat.com>
Link: https://lore.kernel.org/r/20200615202408.2242614-1-pjones@redhat.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/firmware/efi/Kconfig |   11 +++++++++++
 drivers/firmware/efi/efi.c   |    2 +-
 2 files changed, 12 insertions(+), 1 deletion(-)

--- a/drivers/firmware/efi/Kconfig
+++ b/drivers/firmware/efi/Kconfig
@@ -219,3 +219,14 @@ config EFI_EARLYCON
 	depends on SERIAL_EARLYCON && !ARM && !IA64
 	select FONT_SUPPORT
 	select ARCH_USE_MEMREMAP_PROT
+
+config EFI_CUSTOM_SSDT_OVERLAYS
+	bool "Load custom ACPI SSDT overlay from an EFI variable"
+	depends on EFI_VARS && ACPI
+	default ACPI_TABLE_UPGRADE
+	help
+	  Allow loading of an ACPI SSDT overlay from an EFI variable specified
+	  by a kernel command line option.
+
+	  See Documentation/admin-guide/acpi/ssdt-overlays.rst for more
+	  information.
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -217,7 +217,7 @@ static void generic_ops_unregister(void)
 	efivars_unregister(&generic_efivars);
 }
 
-#if IS_ENABLED(CONFIG_ACPI)
+#ifdef CONFIG_EFI_CUSTOM_SSDT_OVERLAYS
 #define EFIVAR_SSDT_NAME_MAX	16
 static char efivar_ssdt[EFIVAR_SSDT_NAME_MAX] __initdata;
 static int __init efivar_ssdt_setup(char *str)

Re: [PATCH 5.4 35/65] nfsd: clients dont need to break their own delegations

[J. Bruce Fields]

NACK.

(How did this one even end up headed for stable?  It wasn't cc'd to
stable, it's not a bugfix, and it's not a small patch.)

--b.

On Tue, Jul 07, 2020 at 05:17:14PM +0200, Greg Kroah-Hartman wrote:
> From: J. Bruce Fields <bfields@redhat.com>
> 
> [ Upstream commit 28df3d1539de5090f7916f6fff03891b67f366f4 ]
> 
> We currently revoke read delegations on any write open or any operation
> that modifies file data or metadata (including rename, link, and
> unlink).  But if the delegation in question is the only read delegation
> and is held by the client performing the operation, that's not really
> necessary.
> 
> It's not always possible to prevent this in the NFSv4.0 case, because
> there's not always a way to determine which client an NFSv4.0 delegation
> came from.  (In theory we could try to guess this from the transport
> layer, e.g., by assuming all traffic on a given TCP connection comes
> from the same client.  But that's not really correct.)
> 
> In the NFSv4.1 case the session layer always tells us the client.
> 
> This patch should remove such self-conflicts in all cases where we can
> reliably determine the client from the compound.
> 
> To do that we need to track "who" is performing a given (possibly
> lease-breaking) file operation.  We're doing that by storing the
> information in the svc_rqst and using kthread_data() to map the current
> task back to a svc_rqst.
> 
> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  Documentation/filesystems/locking.rst |  2 ++
>  fs/locks.c                            |  3 +++
>  fs/nfsd/nfs4proc.c                    |  2 ++
>  fs/nfsd/nfs4state.c                   | 14 ++++++++++++++
>  fs/nfsd/nfsd.h                        |  2 ++
>  fs/nfsd/nfssvc.c                      |  6 ++++++
>  include/linux/fs.h                    |  1 +
>  include/linux/sunrpc/svc.h            |  1 +
>  8 files changed, 31 insertions(+)
> 
> diff --git a/Documentation/filesystems/locking.rst b/Documentation/filesystems/locking.rst
> index fc3a0704553cf..b5f8d15a30fb7 100644
> --- a/Documentation/filesystems/locking.rst
> +++ b/Documentation/filesystems/locking.rst
> @@ -425,6 +425,7 @@ prototypes::
>  	int (*lm_grant)(struct file_lock *, struct file_lock *, int);
>  	void (*lm_break)(struct file_lock *); /* break_lease callback */
>  	int (*lm_change)(struct file_lock **, int);
> +	bool (*lm_breaker_owns_lease)(struct file_lock *);
>  
>  locking rules:
>  
> @@ -435,6 +436,7 @@ lm_notify:		yes		yes			no
>  lm_grant:		no		no			no
>  lm_break:		yes		no			no
>  lm_change		yes		no			no
> +lm_breaker_owns_lease:	no		no			no
>  ==========		=============	=================	=========
>  
>  buffer_head
> diff --git a/fs/locks.c b/fs/locks.c
> index b8a31c1c4fff3..a3f186846e93e 100644
> --- a/fs/locks.c
> +++ b/fs/locks.c
> @@ -1557,6 +1557,9 @@ static bool leases_conflict(struct file_lock *lease, struct file_lock *breaker)
>  {
>  	bool rc;
>  
> +	if (lease->fl_lmops->lm_breaker_owns_lease
> +			&& lease->fl_lmops->lm_breaker_owns_lease(lease))
> +		return false;
>  	if ((breaker->fl_flags & FL_LAYOUT) != (lease->fl_flags & FL_LAYOUT)) {
>  		rc = false;
>  		goto trace;
> diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c
> index 4798667af647c..96fa2837d3cfb 100644
> --- a/fs/nfsd/nfs4proc.c
> +++ b/fs/nfsd/nfs4proc.c
> @@ -1961,6 +1961,8 @@ nfsd4_proc_compound(struct svc_rqst *rqstp)
>  		goto encode_op;
>  	}
>  
> +	rqstp->rq_lease_breaker = (void **)&cstate->clp;
> +
>  	trace_nfsd_compound(rqstp, args->opcnt);
>  	while (!status && resp->opcnt < args->opcnt) {
>  		op = &args->ops[resp->opcnt++];
> diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
> index 8650a97e2ba96..1e8f5e281bb53 100644
> --- a/fs/nfsd/nfs4state.c
> +++ b/fs/nfsd/nfs4state.c
> @@ -4464,6 +4464,19 @@ nfsd_break_deleg_cb(struct file_lock *fl)
>  	return ret;
>  }
>  
> +static bool nfsd_breaker_owns_lease(struct file_lock *fl)
> +{
> +	struct nfs4_delegation *dl = fl->fl_owner;
> +	struct svc_rqst *rqst;
> +	struct nfs4_client *clp;
> +
> +	if (!i_am_nfsd())
> +		return NULL;
> +	rqst = kthread_data(current);
> +	clp = *(rqst->rq_lease_breaker);
> +	return dl->dl_stid.sc_client == clp;
> +}
> +
>  static int
>  nfsd_change_deleg_cb(struct file_lock *onlist, int arg,
>  		     struct list_head *dispose)
> @@ -4475,6 +4488,7 @@ nfsd_change_deleg_cb(struct file_lock *onlist, int arg,
>  }
>  
>  static const struct lock_manager_operations nfsd_lease_mng_ops = {
> +	.lm_breaker_owns_lease = nfsd_breaker_owns_lease,
>  	.lm_break = nfsd_break_deleg_cb,
>  	.lm_change = nfsd_change_deleg_cb,
>  };
> diff --git a/fs/nfsd/nfsd.h b/fs/nfsd/nfsd.h
> index af2947551e9ce..7a835fb7d79f7 100644
> --- a/fs/nfsd/nfsd.h
> +++ b/fs/nfsd/nfsd.h
> @@ -87,6 +87,8 @@ int		nfsd_pool_stats_release(struct inode *, struct file *);
>  
>  void		nfsd_destroy(struct net *net);
>  
> +bool		i_am_nfsd(void);
> +
>  struct nfsdfs_client {
>  	struct kref cl_ref;
>  	void (*cl_release)(struct kref *kref);
> diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c
> index e8bee8ff30c59..cb7f0aa9a3b05 100644
> --- a/fs/nfsd/nfssvc.c
> +++ b/fs/nfsd/nfssvc.c
> @@ -590,6 +590,11 @@ static const struct svc_serv_ops nfsd_thread_sv_ops = {
>  	.svo_module		= THIS_MODULE,
>  };
>  
> +bool i_am_nfsd()
> +{
> +	return kthread_func(current) == nfsd;
> +}
> +
>  int nfsd_create_serv(struct net *net)
>  {
>  	int error;
> @@ -997,6 +1002,7 @@ nfsd_dispatch(struct svc_rqst *rqstp, __be32 *statp)
>  		*statp = rpc_garbage_args;
>  		return 1;
>  	}
> +	rqstp->rq_lease_breaker = NULL;
>  	/*
>  	 * Give the xdr decoder a chance to change this if it wants
>  	 * (necessary in the NFSv4.0 compound case)
> diff --git a/include/linux/fs.h b/include/linux/fs.h
> index 5bd384dbdca58..4b5b7667405d8 100644
> --- a/include/linux/fs.h
> +++ b/include/linux/fs.h
> @@ -1040,6 +1040,7 @@ struct lock_manager_operations {
>  	bool (*lm_break)(struct file_lock *);
>  	int (*lm_change)(struct file_lock *, int, struct list_head *);
>  	void (*lm_setup)(struct file_lock *, void **);
> +	bool (*lm_breaker_owns_lease)(struct file_lock *);
>  };
>  
>  struct lock_manager {
> diff --git a/include/linux/sunrpc/svc.h b/include/linux/sunrpc/svc.h
> index 1afe38eb33f7e..ab6e12d9fcf61 100644
> --- a/include/linux/sunrpc/svc.h
> +++ b/include/linux/sunrpc/svc.h
> @@ -299,6 +299,7 @@ struct svc_rqst {
>  	struct net		*rq_bc_net;	/* pointer to backchannel's
>  						 * net namespace
>  						 */
> +	void **			rq_lease_breaker; /* The v4 client breaking a lease */
>  };
>  
>  #define SVC_NET(rqst) (rqst->rq_xprt ? rqst->rq_xprt->xpt_net : rqst->rq_bc_net)
> -- 
> 2.25.1
> 
> 
> 

Re: [PATCH 5.4 34/65] kthread: save thread function

[J. Bruce Fields]

NACK.--b.

On Tue, Jul 07, 2020 at 05:17:13PM +0200, Greg Kroah-Hartman wrote:
> From: J. Bruce Fields <bfields@redhat.com>
> 
> [ Upstream commit 52782c92ac85c4e393eb4a903a62e6c24afa633f ]
> 
> It's handy to keep the kthread_fn just as a unique cookie to identify
> classes of kthreads.  E.g. if you can verify that a given task is
> running your thread_fn, then you may know what sort of type kthread_data
> points to.
> 
> We'll use this in nfsd to pass some information into the vfs.  Note it
> will need kthread_data() exported too.
> 
> Original-patch-by: Tejun Heo <tj@kernel.org>
> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  include/linux/kthread.h |  1 +
>  kernel/kthread.c        | 17 +++++++++++++++++
>  2 files changed, 18 insertions(+)
> 
> diff --git a/include/linux/kthread.h b/include/linux/kthread.h
> index 0f9da966934e2..59bbc63ff8637 100644
> --- a/include/linux/kthread.h
> +++ b/include/linux/kthread.h
> @@ -57,6 +57,7 @@ bool kthread_should_stop(void);
>  bool kthread_should_park(void);
>  bool __kthread_should_park(struct task_struct *k);
>  bool kthread_freezable_should_stop(bool *was_frozen);
> +void *kthread_func(struct task_struct *k);
>  void *kthread_data(struct task_struct *k);
>  void *kthread_probe_data(struct task_struct *k);
>  int kthread_park(struct task_struct *k);
> diff --git a/kernel/kthread.c b/kernel/kthread.c
> index b262f47046ca4..543dff6b576c7 100644
> --- a/kernel/kthread.c
> +++ b/kernel/kthread.c
> @@ -46,6 +46,7 @@ struct kthread_create_info
>  struct kthread {
>  	unsigned long flags;
>  	unsigned int cpu;
> +	int (*threadfn)(void *);
>  	void *data;
>  	struct completion parked;
>  	struct completion exited;
> @@ -152,6 +153,20 @@ bool kthread_freezable_should_stop(bool *was_frozen)
>  }
>  EXPORT_SYMBOL_GPL(kthread_freezable_should_stop);
>  
> +/**
> + * kthread_func - return the function specified on kthread creation
> + * @task: kthread task in question
> + *
> + * Returns NULL if the task is not a kthread.
> + */
> +void *kthread_func(struct task_struct *task)
> +{
> +	if (task->flags & PF_KTHREAD)
> +		return to_kthread(task)->threadfn;
> +	return NULL;
> +}
> +EXPORT_SYMBOL_GPL(kthread_func);
> +
>  /**
>   * kthread_data - return data value specified on kthread creation
>   * @task: kthread task in question
> @@ -164,6 +179,7 @@ void *kthread_data(struct task_struct *task)
>  {
>  	return to_kthread(task)->data;
>  }
> +EXPORT_SYMBOL_GPL(kthread_data);
>  
>  /**
>   * kthread_probe_data - speculative version of kthread_data()
> @@ -237,6 +253,7 @@ static int kthread(void *_create)
>  		do_exit(-ENOMEM);
>  	}
>  
> +	self->threadfn = threadfn;
>  	self->data = data;
>  	init_completion(&self->exited);
>  	init_completion(&self->parked);
> -- 
> 2.25.1
> 
> 
> 

Re: [PATCH 5.4 35/65] nfsd: clients dont need to break their own delegations

[Sasha Levin]

On Tue, Jul 07, 2020 at 11:31:22AM -0400, J. Bruce Fields wrote:
>NACK.
>
>(How did this one even end up headed for stable?  It wasn't cc'd to

It came in when I was looking at the later nfs patches in this series
and figured it is a fix on its own.

>stable, it's not a bugfix, and it's not a small patch.)

If its not a bugfix, why did it go in -rc4 rather than waiting for the
merge window?

-- 
Thanks,
Sasha

Re: [PATCH 5.4 35/65] nfsd: clients dont need to break their own delegations

[Sasha Levin]

On Tue, Jul 07, 2020 at 01:20:51PM -0400, Sasha Levin wrote:
>On Tue, Jul 07, 2020 at 11:31:22AM -0400, J. Bruce Fields wrote:
>>NACK.
>>
>>(How did this one even end up headed for stable?  It wasn't cc'd to
>
>It came in when I was looking at the later nfs patches in this series
>and figured it is a fix on its own.
>
>>stable, it's not a bugfix, and it's not a small patch.)
>
>If its not a bugfix, why did it go in -rc4 rather than waiting for the
>merge window?

Sorry, my bad, I failed at shuffling patches around. I'll drop these.

-- 
Thanks,
Sasha

Re: [PATCH 5.4 35/65] nfsd: clients dont need to break their own delegations

[J. Bruce Fields]

On Tue, Jul 07, 2020 at 01:29:30PM -0400, Sasha Levin wrote:
> On Tue, Jul 07, 2020 at 01:20:51PM -0400, Sasha Levin wrote:
> > On Tue, Jul 07, 2020 at 11:31:22AM -0400, J. Bruce Fields wrote:
> > > NACK.
> > > 
> > > (How did this one even end up headed for stable?  It wasn't cc'd to
> > 
> > It came in when I was looking at the later nfs patches in this series
> > and figured it is a fix on its own.
> > 
> > > stable, it's not a bugfix, and it's not a small patch.)
> > 
> > If its not a bugfix, why did it go in -rc4 rather than waiting for the
> > merge window?

They went in during the merge window, unless I'm very confused.

> Sorry, my bad, I failed at shuffling patches around. I'll drop these.

OK, thanks.

--b.

Re: [PATCH 5.4 00/65] 5.4.51-rc1 review

[Naresh Kamboju]

On Tue, 7 Jul 2020 at 20:49, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.4.51 release.
> There are 65 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 09 Jul 2020 14:57:34 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.51-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 5.4.51-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.4.y
git commit: 47d410b54275a08dfc16b90353866ac1f783c0aa
git describe: v5.4.49-240-g47d410b54275
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.4-oe/build/v5.4.49-240-g47d410b54275

No regressions (compared to build v5.4.49)

No fixes (compared to build v5.4.49)

Ran 35614 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- juno-r2-compat
- juno-r2-kasan
- nxp-ls2088
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86
- x86-kasan

Test Suites
-----------
* install-android-platform-tools-r2800
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-hugetlb-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-sched-tests
* v4l2-compliance
* kvm-unit-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* network-basic-tests
* ltp-open-posix-tests

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.4 00/65] 5.4.51-rc1 review

[Jon Hunter]

On 07/07/2020 16:16, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.51 release.
> There are 65 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 09 Jul 2020 14:57:34 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.51-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests are passing for Tegra ...

Test results for stable-v5.4:
    11 builds:	11 pass, 0 fail
    26 boots:	26 pass, 0 fail
    56 tests:	56 pass, 0 fail

Linux version:	5.4.51-rc1-g47d410b54275
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra210-p3450-0000,
                tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 5.4 00/65] 5.4.51-rc1 review

[Shuah Khan]

On 7/7/20 9:16 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.51 release.
> There are 65 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 09 Jul 2020 14:57:34 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.51-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 5.4 00/65] 5.4.51-rc1 review

[Greg Kroah-Hartman]

On Wed, Jul 08, 2020 at 09:41:33AM +0100, Jon Hunter wrote:
> 
> On 07/07/2020 16:16, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.4.51 release.
> > There are 65 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Thu, 09 Jul 2020 14:57:34 +0000.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.51-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> 
> All tests are passing for Tegra ...
> 
> Test results for stable-v5.4:
>     11 builds:	11 pass, 0 fail
>     26 boots:	26 pass, 0 fail
>     56 tests:	56 pass, 0 fail
> 
> Linux version:	5.4.51-rc1-g47d410b54275
> Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
>                 tegra194-p2972-0000, tegra20-ventana,
>                 tegra210-p2371-2180, tegra210-p3450-0000,
>                 tegra30-cardhu-a04

Thanks for testing all of these and letting me know.

greg k-h

Re: [PATCH 5.4 00/65] 5.4.51-rc1 review

[Jon Hunter]

On 08/07/2020 16:15, Greg Kroah-Hartman wrote:
> On Wed, Jul 08, 2020 at 09:41:33AM +0100, Jon Hunter wrote:
>>
>> On 07/07/2020 16:16, Greg Kroah-Hartman wrote:
>>> This is the start of the stable review cycle for the 5.4.51 release.
>>> There are 65 patches in this series, all will be posted as a response
>>> to this one.  If anyone has any issues with these being applied, please
>>> let me know.
>>>
>>> Responses should be made by Thu, 09 Jul 2020 14:57:34 +0000.
>>> Anything received after that time might be too late.
>>>
>>> The whole patch series can be found in one patch at:
>>> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.51-rc1.gz
>>> or in the git tree and branch at:
>>> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
>>> and the diffstat can be found below.
>>>
>>> thanks,
>>>
>>> greg k-h
>>
>> All tests are passing for Tegra ...
>>
>> Test results for stable-v5.4:
>>     11 builds:	11 pass, 0 fail
>>     26 boots:	26 pass, 0 fail
>>     56 tests:	56 pass, 0 fail
>>
>> Linux version:	5.4.51-rc1-g47d410b54275
>> Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
>>                 tegra194-p2972-0000, tegra20-ventana,
>>                 tegra210-p2371-2180, tegra210-p3450-0000,
>>                 tegra30-cardhu-a04
> 
> Thanks for testing all of these and letting me know.

No problem. For some reason the v5.7 review email never made it to my
inbox AFAICT. Who knows if it will show up tomorrow, but anyway it all
looks good to Tegra ...

Test results for stable-v5.7:
    11 builds:	11 pass, 0 fail
    26 boots:	26 pass, 0 fail
    56 tests:	56 pass, 0 fail

Linux version:	5.7.8-rc1-gb371afd12a48
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra210-p3450-0000,
                tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 5.4 00/65] 5.4.51-rc1 review

[Guenter Roeck]

On Tue, Jul 07, 2020 at 05:16:39PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.51 release.
> There are 65 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 09 Jul 2020 14:57:34 +0000.
> Anything received after that time might be too late.
> 
Build results:
	total: 157 pass: 157 fail: 0
Qemu test results:
	total: 430 pass: 430 fail: 0

Guenter

Re: [PATCH 5.4 00/65] 5.4.51-rc1 review

[Greg Kroah-Hartman]

On Wed, Jul 08, 2020 at 05:58:27PM +0100, Jon Hunter wrote:
> 
> On 08/07/2020 16:15, Greg Kroah-Hartman wrote:
> > On Wed, Jul 08, 2020 at 09:41:33AM +0100, Jon Hunter wrote:
> >>
> >> On 07/07/2020 16:16, Greg Kroah-Hartman wrote:
> >>> This is the start of the stable review cycle for the 5.4.51 release.
> >>> There are 65 patches in this series, all will be posted as a response
> >>> to this one.  If anyone has any issues with these being applied, please
> >>> let me know.
> >>>
> >>> Responses should be made by Thu, 09 Jul 2020 14:57:34 +0000.
> >>> Anything received after that time might be too late.
> >>>
> >>> The whole patch series can be found in one patch at:
> >>> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.51-rc1.gz
> >>> or in the git tree and branch at:
> >>> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> >>> and the diffstat can be found below.
> >>>
> >>> thanks,
> >>>
> >>> greg k-h
> >>
> >> All tests are passing for Tegra ...
> >>
> >> Test results for stable-v5.4:
> >>     11 builds:	11 pass, 0 fail
> >>     26 boots:	26 pass, 0 fail
> >>     56 tests:	56 pass, 0 fail
> >>
> >> Linux version:	5.4.51-rc1-g47d410b54275
> >> Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
> >>                 tegra194-p2972-0000, tegra20-ventana,
> >>                 tegra210-p2371-2180, tegra210-p3450-0000,
> >>                 tegra30-cardhu-a04
> > 
> > Thanks for testing all of these and letting me know.
> 
> No problem. For some reason the v5.7 review email never made it to my
> inbox AFAICT. Who knows if it will show up tomorrow, but anyway it all
> looks good to Tegra ...
> 
> Test results for stable-v5.7:
>     11 builds:	11 pass, 0 fail
>     26 boots:	26 pass, 0 fail
>     56 tests:	56 pass, 0 fail
> 
> Linux version:	5.7.8-rc1-gb371afd12a48
> Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
>                 tegra194-p2972-0000, tegra20-ventana,
>                 tegra210-p2371-2180, tegra210-p3450-0000,
>                 tegra30-cardhu-a04

Oh, nice, I was wondering why you didn't respond for that.

thanks for letting me know.

greg k-h