From: Lee Jones <lee.jones@linaro.org>
To: jejb@linux.ibm.com, martin.petersen@oracle.com
Cc: linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org,
Lee Jones <lee.jones@linaro.org>,
QLogic-Storage-Upstream@cavium.com
Subject: [PATCH 17/30] scsi: qedf: qedf_io: Remove a whole host of unused variables
Date: Wed, 8 Jul 2020 13:02:08 +0100 [thread overview]
Message-ID: <20200708120221.3386672-18-lee.jones@linaro.org> (raw)
In-Reply-To: <20200708120221.3386672-1-lee.jones@linaro.org>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qedf/qedf_io.c: In function ‘qedf_cmd_timeout’:
drivers/scsi/qedf/qedf_io.c:25:5: warning: variable ‘op’ set but not used [-Wunused-but-set-variable]
25 | u8 op = 0;
| ^~
drivers/scsi/qedf/qedf_io.c: In function ‘qedf_map_sg’:
drivers/scsi/qedf/qedf_io.c:490:12: warning: variable ‘end_addr’ set but not used [-Wunused-but-set-variable]
490 | u64 addr, end_addr;
| ^~~~~~~~
drivers/scsi/qedf/qedf_io.c: In function ‘qedf_post_io_req’:
drivers/scsi/qedf/qedf_io.c:863:22: warning: variable ‘req_type’ set but not used [-Wunused-but-set-variable]
863 | enum fcoe_task_type req_type = 0;
| ^~~~~~~~
drivers/scsi/qedf/qedf_io.c: In function ‘qedf_scsi_completion’:
drivers/scsi/qedf/qedf_io.c:1134:31: warning: variable ‘task_ctx’ set but not used [-Wunused-but-set-variable]
1134 | struct e4_fcoe_task_context *task_ctx;
| ^~~~~~~~
drivers/scsi/qedf/qedf_io.c: In function ‘qedf_scsi_done’:
drivers/scsi/qedf/qedf_io.c:1345:6: warning: variable ‘xid’ set but not used [-Wunused-but-set-variable]
1345 | u16 xid;
| ^~~
drivers/scsi/qedf/qedf_io.c: In function ‘qedf_initiate_abts’:
drivers/scsi/qedf/qedf_io.c:1866:6: warning: variable ‘r_a_tov’ set but not used [-Wunused-but-set-variable]
1866 | u32 r_a_tov = 0;
| ^~~~~~~
drivers/scsi/qedf/qedf_io.c: In function ‘qedf_process_abts_compl’:
drivers/scsi/qedf/qedf_io.c:1967:11: warning: variable ‘xid’ set but not used [-Wunused-but-set-variable]
1967 | uint16_t xid;
| ^~~
drivers/scsi/qedf/qedf_io.c: In function ‘qedf_initiate_cleanup’:
drivers/scsi/qedf/qedf_io.c:2163:31: warning: variable ‘task’ set but not used [-Wunused-but-set-variable]
2163 | struct e4_fcoe_task_context *task;
| ^~~~
drivers/scsi/qedf/qedf_io.c: In function ‘qedf_process_unsol_compl’:
drivers/scsi/qedf/qedf_io.c:2534:11: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable]
2534 | uint16_t tmp;
| ^~~
Cc: QLogic-Storage-Upstream@cavium.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/scsi/qedf/qedf_io.c | 30 ++++--------------------------
1 file changed, 4 insertions(+), 26 deletions(-)
diff --git a/drivers/scsi/qedf/qedf_io.c b/drivers/scsi/qedf/qedf_io.c
index 0f6a15c1a04b3..acd9774a9387c 100644
--- a/drivers/scsi/qedf/qedf_io.c
+++ b/drivers/scsi/qedf/qedf_io.c
@@ -22,7 +22,6 @@ static void qedf_cmd_timeout(struct work_struct *work)
container_of(work, struct qedf_ioreq, timeout_work.work);
struct qedf_ctx *qedf;
struct qedf_rport *fcport;
- u8 op = 0;
if (io_req == NULL) {
QEDF_INFO(NULL, QEDF_LOG_IO, "io_req is NULL.\n");
@@ -89,7 +88,6 @@ static void qedf_cmd_timeout(struct work_struct *work)
io_req->event = QEDF_IOREQ_EV_ELS_TMO;
/* Call callback function to complete command */
if (io_req->cb_func && io_req->cb_arg) {
- op = io_req->cb_arg->op;
io_req->cb_func(io_req->cb_arg);
io_req->cb_arg = NULL;
}
@@ -487,7 +485,7 @@ static int qedf_map_sg(struct qedf_ioreq *io_req)
int sg_count = 0;
int bd_count = 0;
u32 sg_len;
- u64 addr, end_addr;
+ u64 addr;
int i = 0;
sg_count = dma_map_sg(&qedf->pdev->dev, scsi_sglist(sc),
@@ -502,10 +500,9 @@ static int qedf_map_sg(struct qedf_ioreq *io_req)
scsi_for_each_sg(sc, sg, sg_count, i) {
sg_len = (u32)sg_dma_len(sg);
addr = (u64)sg_dma_address(sg);
- end_addr = (u64)(addr + sg_len);
/*
- * Intermediate s/g element so check if start and end address
+ * Intermediate s/g element so check if start address
* is page aligned. Only required for writes and only if the
* number of scatter/gather elements is 8 or more.
*/
@@ -860,7 +857,6 @@ int qedf_post_io_req(struct qedf_rport *fcport, struct qedf_ioreq *io_req)
struct qedf_ctx *qedf = lport_priv(lport);
struct e4_fcoe_task_context *task_ctx;
u16 xid;
- enum fcoe_task_type req_type = 0;
struct fcoe_wqe *sqe;
u16 sqe_idx;
@@ -873,11 +869,9 @@ int qedf_post_io_req(struct qedf_rport *fcport, struct qedf_ioreq *io_req)
io_req->cpu = smp_processor_id();
if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) {
- req_type = FCOE_TASK_TYPE_READ_INITIATOR;
io_req->io_req_flags = QEDF_READ;
qedf->input_requests++;
} else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) {
- req_type = FCOE_TASK_TYPE_WRITE_INITIATOR;
io_req->io_req_flags = QEDF_WRITE;
qedf->output_requests++;
} else {
@@ -1130,8 +1124,6 @@ static void qedf_unmap_sg_list(struct qedf_ctx *qedf, struct qedf_ioreq *io_req)
void qedf_scsi_completion(struct qedf_ctx *qedf, struct fcoe_cqe *cqe,
struct qedf_ioreq *io_req)
{
- u16 xid;
- struct e4_fcoe_task_context *task_ctx;
struct scsi_cmnd *sc_cmd;
struct fcoe_cqe_rsp_info *fcp_rsp;
struct qedf_rport *fcport;
@@ -1155,8 +1147,6 @@ void qedf_scsi_completion(struct qedf_ctx *qedf, struct fcoe_cqe *cqe,
return;
}
- xid = io_req->xid;
- task_ctx = qedf_get_task_mem(&qedf->tasks, xid);
sc_cmd = io_req->sc_cmd;
fcp_rsp = &cqe->cqe_info.rsp_info;
@@ -1342,7 +1332,6 @@ void qedf_scsi_completion(struct qedf_ctx *qedf, struct fcoe_cqe *cqe,
void qedf_scsi_done(struct qedf_ctx *qedf, struct qedf_ioreq *io_req,
int result)
{
- u16 xid;
struct scsi_cmnd *sc_cmd;
int refcount;
@@ -1364,7 +1353,6 @@ void qedf_scsi_done(struct qedf_ctx *qedf, struct qedf_ioreq *io_req,
*/
clear_bit(QEDF_CMD_OUTSTANDING, &io_req->flags);
- xid = io_req->xid;
sc_cmd = io_req->sc_cmd;
if (!sc_cmd) {
@@ -1863,7 +1851,6 @@ int qedf_initiate_abts(struct qedf_ioreq *io_req, bool return_scsi_cmd_on_abts)
struct fc_rport_priv *rdata;
struct qedf_ctx *qedf;
u16 xid;
- u32 r_a_tov = 0;
int rc = 0;
unsigned long flags;
struct fcoe_wqe *sqe;
@@ -1886,7 +1873,6 @@ int qedf_initiate_abts(struct qedf_ioreq *io_req, bool return_scsi_cmd_on_abts)
goto out;
}
- r_a_tov = rdata->r_a_tov;
lport = qedf->lport;
if (lport->state != LPORT_ST_READY || !(lport->link_up)) {
@@ -1964,14 +1950,12 @@ void qedf_process_abts_compl(struct qedf_ctx *qedf, struct fcoe_cqe *cqe,
struct qedf_ioreq *io_req)
{
uint32_t r_ctl;
- uint16_t xid;
int rc;
struct qedf_rport *fcport = io_req->fcport;
QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_SCSI_TM, "Entered with xid = "
"0x%x cmd_type = %d\n", io_req->xid, io_req->cmd_type);
- xid = io_req->xid;
r_ctl = cqe->cqe_info.abts_info.r_ctl;
/* This was added at a point when we were scheduling abts_compl &
@@ -2159,8 +2143,6 @@ int qedf_initiate_cleanup(struct qedf_ioreq *io_req,
{
struct qedf_rport *fcport;
struct qedf_ctx *qedf;
- uint16_t xid;
- struct e4_fcoe_task_context *task;
int tmo = 0;
int rc = SUCCESS;
unsigned long flags;
@@ -2220,12 +2202,9 @@ int qedf_initiate_cleanup(struct qedf_ioreq *io_req,
refcount, fcport, fcport->rdata->ids.port_id);
/* Cleanup cmds re-use the same TID as the original I/O */
- xid = io_req->xid;
io_req->cmd_type = QEDF_CLEANUP;
io_req->return_scsi_cmd_on_abts = return_scsi_cmd_on_abts;
- task = qedf_get_task_mem(&qedf->tasks, xid);
-
init_completion(&io_req->cleanup_done);
spin_lock_irqsave(&fcport->rport_lock, flags);
@@ -2531,7 +2510,6 @@ void qedf_process_unsol_compl(struct qedf_ctx *qedf, uint16_t que_idx,
struct fcoe_cqe *cqe)
{
unsigned long flags;
- uint16_t tmp;
uint16_t pktlen = cqe->cqe_info.unsolic_info.pkt_len;
u32 payload_len, crc;
struct fc_frame_header *fh;
@@ -2629,9 +2607,9 @@ void qedf_process_unsol_compl(struct qedf_ctx *qedf, uint16_t que_idx,
qedf->bdq_prod_idx = 0;
writew(qedf->bdq_prod_idx, qedf->bdq_primary_prod);
- tmp = readw(qedf->bdq_primary_prod);
+ readw(qedf->bdq_primary_prod);
writew(qedf->bdq_prod_idx, qedf->bdq_secondary_prod);
- tmp = readw(qedf->bdq_secondary_prod);
+ readw(qedf->bdq_secondary_prod);
spin_unlock_irqrestore(&qedf->hba_lock, flags);
}
--
2.25.1
next prev parent reply other threads:[~2020-07-08 12:02 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-08 12:01 [PATCH 00/30] Fix a bunch more SCSI related W=1 warnings Lee Jones
2020-07-08 12:01 ` [PATCH 01/30] scsi: libfc: fc_exch: Supply some missing kerneldoc struct/function attributes/params Lee Jones
2020-07-08 12:01 ` [PATCH 02/30] include: scsi: scsi_transport_fc: Match HBA Attribute Length with HBAAPI V2.0 definitions Lee Jones
2020-07-08 12:01 ` [PATCH 03/30] scsi: libfc: fc_disc: trivial: Fix spelling mistake of 'discovery' Lee Jones
2020-07-08 12:04 ` Johannes Thumshirn
2020-07-08 12:12 ` Lee Jones
2020-07-08 12:14 ` Johannes Thumshirn
2020-07-08 12:01 ` [PATCH 04/30] scsi: fcoe: fcoe: Fix various kernel-doc infringements Lee Jones
2020-07-08 12:01 ` [PATCH 05/30] scsi: fcoe: fcoe_ctlr: Fix a myriad of documentation issues Lee Jones
2020-07-08 12:01 ` [PATCH 06/30] scsi: fcoe: fcoe_transport: Correct some kernel-doc issues Lee Jones
2020-07-08 12:01 ` [PATCH 07/30] scsi: bnx2fc: bnx2fc_fcoe: Repair a range of kerneldoc issues Lee Jones
2020-07-08 12:01 ` [PATCH 08/30] scsi: qedf: qedf_main: Demote obvious misuse of kerneldoc to standard comment blocks Lee Jones
2020-07-08 12:02 ` [PATCH 09/30] scsi: qedf: qedf_main: Remove set but not checked variable 'tmp' Lee Jones
2020-07-08 12:02 ` [PATCH 10/30] scsi: libfc: fc_lport: Repair function parameter documentation Lee Jones
2020-07-08 12:02 ` [PATCH 11/30] scsi: libfc: fc_rport: Fix a couple of misdocumented function parameters Lee Jones
2020-07-08 12:15 ` Johannes Thumshirn
2020-07-08 12:23 ` Lee Jones
2020-07-08 12:02 ` [PATCH 12/30] scsi: libfc: fc_fcp: Provide missing and repair existing function documentation Lee Jones
2020-07-08 12:02 ` [PATCH 13/30] scsi: libfc: fc_rport: Fix bitrotted function parameter and copy/paste error Lee Jones
2020-07-08 12:17 ` Johannes Thumshirn
2020-07-08 12:24 ` Lee Jones
2020-07-08 12:25 ` Lee Jones
2020-07-08 12:02 ` [PATCH 14/30] scsi: bnx2fc: bnx2fc_hwi: Fix a couple of bitrotted function documentation headers Lee Jones
2020-07-08 12:02 ` [PATCH 15/30] scsi: arcmsr: arcmsr_hba: Remove some set but unused variables Lee Jones
2020-07-08 12:02 ` [PATCH 16/30] scsi: arcmsr: arcmsr_hba: Make room for the trailing NULL, even if it is over-written Lee Jones
2020-07-15 20:26 ` Martin K. Petersen
2020-07-16 7:59 ` Lee Jones
2020-07-08 12:02 ` Lee Jones [this message]
2020-07-08 12:02 ` [PATCH 18/30] scsi: bnx2fc: bnx2fc_tgt: Demote obvious misuse of kerneldoc to standard comment blocks Lee Jones
2020-07-08 12:02 ` [PATCH 19/30] scsi: aic7xxx: aic7xxx_osm: Remove unused variable 'tinfo' Lee Jones
2020-07-08 12:02 ` [PATCH 20/30] scsi: aic7xxx: aic7xxx_osm: Remove unused variable 'ahc' Lee Jones
2020-07-08 12:02 ` [PATCH 21/30] scsi: aic7xxx: aic7xxx_osm: Remove unused variable 'targ' Lee Jones
2020-07-08 12:02 ` [PATCH 22/30] scsi: aic7xxx: aic7xxx_osm: Fix 'amount_xferred' set but not used issue Lee Jones
2020-07-08 12:02 ` [PATCH 23/30] scsi: qedf: qedf_debugfs: Demote obvious misuse of kerneldoc to standard comment blocks Lee Jones
2020-07-08 12:02 ` [PATCH 24/30] scsi: aacraid: linit: Provide suggested curly braces around empty body of if() Lee Jones
2020-07-08 12:02 ` [PATCH 25/30] scsi: aacraid: linit: Fix a couple of small kerneldoc issues Lee Jones
2020-07-08 12:02 ` [PATCH 26/30] scsi: aic94xx: aic94xx_init: Demote seemingly unintentional kerneldoc header Lee Jones
2020-07-08 12:02 ` [PATCH 27/30] scsi: pm8001: pm8001_init: Demote obvious misuse of kerneldoc and update others Lee Jones
2020-07-08 12:17 ` Jinpu Wang
2020-07-08 12:02 ` [PATCH 28/30] scsi: aic94xx: aic94xx_hwi: Repair kerneldoc formatting error and remove extra param Lee Jones
2020-07-08 12:02 ` [PATCH 29/30] scsi: aacraid: aachba: Fix a bunch of function doc formatting errors Lee Jones
2020-07-08 12:02 ` [PATCH 30/30] scsi: qla4xxx: ql4_init: Provide a missing function param description and fix formatting Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200708120221.3386672-18-lee.jones@linaro.org \
--to=lee.jones@linaro.org \
--cc=QLogic-Storage-Upstream@cavium.com \
--cc=jejb@linux.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).