From: Jim Quinlan <james.quinlan@broadcom.com>
To: linux-pci@vger.kernel.org,
Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
bcm-kernel-feedback-list@broadcom.com,
james.quinlan@broadcom.com
Cc: Jim Quinlan <james.quinlan@broadcom.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Rob Herring <robh+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM
BCM7XXX ARM ARCHITECTURE),
linux-rpi-kernel@lists.infradead.org (moderated list:BROADCOM
BCM2711/BCM2835 ARM ARCHITECTURE),
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v7 03/12] dt-bindings: PCI: Add bindings for more Brcmstb chips
Date: Wed, 8 Jul 2020 15:31:56 -0400 [thread overview]
Message-ID: <20200708193219.47134-4-james.quinlan@broadcom.com> (raw)
In-Reply-To: <20200708193219.47134-1-james.quinlan@broadcom.com>
From: Jim Quinlan <jquinlan@broadcom.com>
- Add compatible strings for three more Broadcom STB chips: 7278, 7216,
7211 (STB version of RPi4).
- Add new property 'brcm,scb-sizes'.
- Add new property 'resets'.
- Add new property 'reset-names' for 7216 only.
- Allow 'ranges' and 'dma-ranges' to have more than one item and update
the example to show this.
Signed-off-by: Jim Quinlan <jquinlan@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../bindings/pci/brcm,stb-pcie.yaml | 56 ++++++++++++++++---
1 file changed, 49 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 8680a0f86c5a..807694b4f41f 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -9,12 +9,15 @@ title: Brcmstb PCIe Host Controller Device Tree Bindings
maintainers:
- Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
-allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
-
properties:
compatible:
- const: brcm,bcm2711-pcie # The Raspberry Pi 4
+ items:
+ - enum:
+ - brcm,bcm2711-pcie # The Raspberry Pi 4
+ - brcm,bcm7211-pcie # Broadcom STB version of RPi4
+ - brcm,bcm7278-pcie # Broadcom 7278 Arm
+ - brcm,bcm7216-pcie # Broadcom 7216 Arm
+ - brcm,bcm7445-pcie # Broadcom 7445 Arm
reg:
maxItems: 1
@@ -34,10 +37,12 @@ properties:
- const: msi
ranges:
- maxItems: 1
+ minItems: 1
+ maxItems: 4
dma-ranges:
- maxItems: 1
+ minItems: 1
+ maxItems: 6
clocks:
maxItems: 1
@@ -58,8 +63,31 @@ properties:
aspm-no-l0s: true
+ resets:
+ description: for "brcm,bcm7216-pcie", must be a valid reset
+ phandle pointing to the RESCAL reset controller provider node.
+ $ref: "/schemas/types.yaml#/definitions/phandle"
+
+ reset-names:
+ items:
+ - const: rescal
+
+ brcm,scb-sizes:
+ description: u64 giving the 64bit PCIe memory
+ viewport size of a memory controller. There may be up to
+ three controllers, and each size must be a power of two
+ with a size greater or equal to the amount of memory the
+ controller supports. Note that each memory controller
+ may have two component regions -- base and extended -- so
+ this information cannot be deduced from the dma-ranges.
+ $ref: /schemas/types.yaml#/definitions/uint64-array
+ items:
+ minItems: 1
+ maxItems: 3
+
required:
- reg
+ - ranges
- dma-ranges
- "#interrupt-cells"
- interrupts
@@ -68,6 +96,18 @@ required:
- interrupt-map
- msi-controller
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,bcm7216-pcie
+ then:
+ required:
+ - resets
+ - reset-names
+
unevaluatedProperties: false
examples:
@@ -93,7 +133,9 @@ examples:
msi-parent = <&pcie0>;
msi-controller;
ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
- dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>;
+ dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>,
+ <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
brcm,enable-ssc;
+ brcm,scb-sizes = <0x0000000080000000 0x0000000080000000>;
};
};
--
2.17.1
next prev parent reply other threads:[~2020-07-08 19:32 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-08 19:31 [PATCH v7 00/12] PCI: brcmstb: enable PCIe for STB chips Jim Quinlan
2020-07-08 19:31 ` [PATCH v7 01/12] PCI: brcmstb: PCIE_BRCMSTB depends on ARCH_BRCMSTB Jim Quinlan
2020-07-08 19:31 ` [PATCH v7 02/12] ata: ahci_brcm: Fix use of BCM7216 reset controller Jim Quinlan
2020-07-08 19:31 ` Jim Quinlan [this message]
2020-07-08 19:31 ` [PATCH v7 04/12] PCI: brcmstb: Add bcm7278 register info Jim Quinlan
2020-07-08 19:31 ` [PATCH v7 05/12] PCI: brcmstb: Add suspend and resume pm_ops Jim Quinlan
2020-07-08 19:31 ` [PATCH v7 06/12] PCI: brcmstb: Add bcm7278 PERST# support Jim Quinlan
2020-07-08 19:32 ` [PATCH v7 07/12] PCI: brcmstb: Add control of rescal reset Jim Quinlan
2020-07-08 19:32 ` [PATCH v7 09/12] PCI: brcmstb: Set additional internal memory DMA viewport sizes Jim Quinlan
2020-07-08 19:32 ` [PATCH v7 10/12] PCI: brcmstb: Accommodate MSI for older chips Jim Quinlan
2020-07-08 19:32 ` [PATCH v7 11/12] PCI: brcmstb: Set bus max burst size by chip type Jim Quinlan
2020-07-08 19:32 ` [PATCH v7 12/12] PCI: brcmstb: Add bcm7211, bcm7216, bcm7445, bcm7278 to match list Jim Quinlan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200708193219.47134-4-james.quinlan@broadcom.com \
--to=james.quinlan@broadcom.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=nsaenzjulienne@suse.de \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).