From: Chu Lin <linchuyuan@google.com>
To: linux@roeck-us.net
Cc: belgaied@google.com, jasonling@google.com, jdelvare@suse.com,
linchuyuan@google.com, linux-hwmon@vger.kernel.org,
linux-kernel@vger.kernel.org, zhongqil@google.com
Subject: [PATCH v2] hwmon: adm1275: Make sure we are reading enough data for different chips
Date: Thu, 9 Jul 2020 04:06:12 +0000 [thread overview]
Message-ID: <20200709040612.3977094-1-linchuyuan@google.com> (raw)
Issue:
When PEC is enabled, binding adm1272 to the adm1275 would
fail due to PEC error. See below:
adm1275: probe of xxxx failed with error -74
Diagnosis:
Per the datasheet of adm1272, adm1278, adm1293 and amd1294,
PMON_CONFIG (0xd4) is 16bits wide. On the other hand,
PMON_CONFIG (0xd4) for adm1275 is 8bits wide. The driver should not
assume everything is 8bits wide and read only 8bits from it.
Solution:
If it is adm1272, adm1278, adm1293 and adm1294, use i2c_read_word.
Else, use i2c_read_byte
Testing:
Binding adm1272 to the driver.
The change is only tested on adm1272.
Signed-off-by: Chu Lin <linchuyuan@google.com>
---
ChangeLog v1 -> v2
- Rename config_read_fn_ptr to config_read_fn
- Move config_read_fn to the first line as it is the longest
variable declaration
- Include adm1293 and adm1294
- Remove the inline comment as I think the purpose is obvious
drivers/hwmon/pmbus/adm1275.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
index e25f541227da..19317575d1c6 100644
--- a/drivers/hwmon/pmbus/adm1275.c
+++ b/drivers/hwmon/pmbus/adm1275.c
@@ -465,6 +465,7 @@ MODULE_DEVICE_TABLE(i2c, adm1275_id);
static int adm1275_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
+ s32 (*config_read_fn)(const struct i2c_client *client, u8 reg);
u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
int config, device_config;
int ret;
@@ -510,11 +511,16 @@ static int adm1275_probe(struct i2c_client *client,
"Device mismatch: Configured %s, detected %s\n",
id->name, mid->name);
- config = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG);
+ if (mid->driver_data == adm1272 || mid->driver_data == adm1278 ||
+ mid->driver_data == adm1293 || mid->driver_data == adm1294)
+ config_read_fn = i2c_smbus_read_word_data;
+ else
+ config_read_fn = i2c_smbus_read_byte_data;
+ config = config_read_fn(client, ADM1275_PMON_CONFIG);
if (config < 0)
return config;
- device_config = i2c_smbus_read_byte_data(client, ADM1275_DEVICE_CONFIG);
+ device_config = config_read_fn(client, ADM1275_DEVICE_CONFIG);
if (device_config < 0)
return device_config;
--
2.27.0.383.g050319c2ae-goog
next reply other threads:[~2020-07-09 4:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-09 4:06 Chu Lin [this message]
2020-07-09 14:05 ` [PATCH v2] hwmon: adm1275: Make sure we are reading enough data for different chips Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200709040612.3977094-1-linchuyuan@google.com \
--to=linchuyuan@google.com \
--cc=belgaied@google.com \
--cc=jasonling@google.com \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=zhongqil@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).