From: Jonathan Marek <jonathan@marek.ca>
To: linux-arm-msm@vger.kernel.org
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Taniya Das <tdas@codeaurora.org>,
linux-clk@vger.kernel.org (open list:COMMON CLK FRAMEWORK),
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v3 06/14] dt-bindings: clock: combine qcom,sdm845-gpucc and qcom,sc7180-gpucc
Date: Thu, 9 Jul 2020 09:52:37 -0400 [thread overview]
Message-ID: <20200709135251.643-7-jonathan@marek.ca> (raw)
In-Reply-To: <20200709135251.643-1-jonathan@marek.ca>
These two bindings are almost identical, so combine them into one. This
will make it easier to add the sm8150 and sm8250 gpucc bindings.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
...qcom,sdm845-gpucc.yaml => qcom,gpucc.yaml} | 14 ++--
.../bindings/clock/qcom,sc7180-gpucc.yaml | 74 -------------------
2 files changed, 9 insertions(+), 79 deletions(-)
rename Documentation/devicetree/bindings/clock/{qcom,sdm845-gpucc.yaml => qcom,gpucc.yaml} (82%)
delete mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
similarity index 82%
rename from Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
rename to Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
index 8a0c576ba8b3..aab6bef79771 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
@@ -1,23 +1,27 @@
# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
-$id: http://devicetree.org/schemas/clock/qcom,sdm845-gpucc.yaml#
+$id: http://devicetree.org/schemas/clock/qcom,gpucc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Qualcomm Graphics Clock & Reset Controller Binding for SDM845
+title: Qualcomm Graphics Clock & Reset Controller Binding
maintainers:
- Taniya Das <tdas@codeaurora.org>
description: |
Qualcomm graphics clock control module which supports the clocks, resets and
- power domains on SDM845.
+ power domains on SDM845/SC7180.
- See also dt-bindings/clock/qcom,gpucc-sdm845.h.
+ See also:
+ dt-bindings/clock/qcom,gpucc-sdm845.h
+ dt-bindings/clock/qcom,gpucc-sc7180.h
properties:
compatible:
- const: qcom,sdm845-gpucc
+ enum:
+ - qcom,sdm845-gpucc
+ - qcom,sc7180-gpucc
clocks:
items:
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
deleted file mode 100644
index fe08461fce05..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
+++ /dev/null
@@ -1,74 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/qcom,sc7180-gpucc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Graphics Clock & Reset Controller Binding for SC7180
-
-maintainers:
- - Taniya Das <tdas@codeaurora.org>
-
-description: |
- Qualcomm graphics clock control module which supports the clocks, resets and
- power domains on SC7180.
-
- See also dt-bindings/clock/qcom,gpucc-sc7180.h.
-
-properties:
- compatible:
- const: qcom,sc7180-gpucc
-
- clocks:
- items:
- - description: Board XO source
- - description: GPLL0 main branch source
- - description: GPLL0 div branch source
-
- clock-names:
- items:
- - const: bi_tcxo
- - const: gcc_gpu_gpll0_clk_src
- - const: gcc_gpu_gpll0_div_clk_src
-
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
- reg:
- maxItems: 1
-
-required:
- - compatible
- - reg
- - clocks
- - clock-names
- - '#clock-cells'
- - '#reset-cells'
- - '#power-domain-cells'
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/clock/qcom,gcc-sc7180.h>
- #include <dt-bindings/clock/qcom,rpmh.h>
- clock-controller@5090000 {
- compatible = "qcom,sc7180-gpucc";
- reg = <0x05090000 0x9000>;
- clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_GPU_GPLL0_CLK_SRC>,
- <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
- clock-names = "bi_tcxo",
- "gcc_gpu_gpll0_clk_src",
- "gcc_gpu_gpll0_div_clk_src";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- };
-...
--
2.26.1
next prev parent reply other threads:[~2020-07-09 13:55 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-09 13:52 [PATCH v3 00/14] Enable GPU for SM8150 and SM8250 Jonathan Marek
2020-07-09 13:52 ` [PATCH v3 01/14] clk: qcom: gcc: fix sm8150 GPU and NPU clocks Jonathan Marek
2020-07-24 8:52 ` Stephen Boyd
2020-07-09 13:52 ` [PATCH v3 02/14] clk: qcom: clk-alpha-pll: remove unused/incorrect PLL_CAL_VAL Jonathan Marek
2020-07-24 8:52 ` Stephen Boyd
2020-07-09 13:52 ` [PATCH v3 03/14] clk: qcom: clk-alpha-pll: same regs and ops for trion and lucid Jonathan Marek
2020-07-24 8:52 ` Stephen Boyd
2020-07-09 13:52 ` [PATCH v3 04/14] clk: qcom: clk-alpha-pll: use the right PCAL_DONE value for lucid pll Jonathan Marek
2020-07-24 8:52 ` Stephen Boyd
2020-07-09 13:52 ` [PATCH v3 05/14] clk: qcom: gcc: remove unnecessary vco_table from SM8150 Jonathan Marek
2020-07-24 8:52 ` Stephen Boyd
2020-07-09 13:52 ` Jonathan Marek [this message]
2020-07-13 23:06 ` [PATCH v3 06/14] dt-bindings: clock: combine qcom,sdm845-gpucc and qcom,sc7180-gpucc Rob Herring
2020-07-24 8:52 ` Stephen Boyd
2020-07-09 13:52 ` [PATCH v3 07/14] dt-bindings: clock: add SM8150 QCOM Graphics clock bindings Jonathan Marek
2020-07-13 23:06 ` Rob Herring
2020-07-24 8:52 ` Stephen Boyd
2020-07-09 13:52 ` [PATCH v3 08/14] dt-bindings: clock: add SM8250 " Jonathan Marek
2020-07-13 23:06 ` Rob Herring
2020-07-24 8:52 ` Stephen Boyd
2020-07-09 13:52 ` [PATCH v3 09/14] clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc drivers Jonathan Marek
2020-07-24 8:52 ` Stephen Boyd
2020-07-09 13:52 ` [PATCH v3 10/14] clk: qcom: Add graphics clock controller driver for SM8150 Jonathan Marek
2020-07-24 8:52 ` Stephen Boyd
2020-07-09 13:52 ` [PATCH v3 11/14] clk: qcom: Add graphics clock controller driver for SM8250 Jonathan Marek
2020-07-24 8:52 ` Stephen Boyd
2020-07-09 13:52 ` [PATCH v3 12/14] dt-bindings: power: Add missing rpmpd rpmh regulator level Jonathan Marek
2020-07-13 23:07 ` Rob Herring
2020-07-09 13:52 ` [PATCH v3 13/14] arm64: dts: qcom: add sm8150 GPU nodes Jonathan Marek
2020-07-09 13:52 ` [PATCH v3 14/14] arm64: dts: qcom: add sm8250 " Jonathan Marek
2020-07-21 7:54 ` [PATCH v3 00/14] Enable GPU for SM8150 and SM8250 Stephen Boyd
2020-07-21 15:45 ` Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200709135251.643-7-jonathan@marek.ca \
--to=jonathan@marek.ca \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=tdas@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).