linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Gustavo A. R. Silva" <gustavoars@kernel.org>
To: Mike Marciniszyn <mike.marciniszyn@intel.com>,
	Dennis Dalessandro <dennis.dalessandro@intel.com>,
	Doug Ledford <dledford@redhat.com>,
	Jason Gunthorpe <jgg@ziepe.ca>, Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Gustavo A. R. Silva" <gustavoars@kernel.org>
Subject: [PATCH v2][next] IB/hfi1: Remove unnecessary fall-through markings
Date: Thu, 9 Jul 2020 18:52:50 -0500	[thread overview]
Message-ID: <20200709235250.GA26678@embeddedor> (raw)

Reorganize the code a bit in a more standard way[1] and remove
unnecessary fall-through markings.

[1] https://lore.kernel.org/lkml/20200708054703.GR207186@unreal/

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
---
Changes in v2:
 - Remove additional overlooked fall-through markings.

 drivers/infiniband/hw/hfi1/chip.c | 27 ++++++++++++++-------------
 1 file changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c
index 15f9c635f292..7eaf99538216 100644
--- a/drivers/infiniband/hw/hfi1/chip.c
+++ b/drivers/infiniband/hw/hfi1/chip.c
@@ -7317,11 +7317,11 @@ static u16 link_width_to_bits(struct hfi1_devdata *dd, u16 width)
 	case 1: return OPA_LINK_WIDTH_1X;
 	case 2: return OPA_LINK_WIDTH_2X;
 	case 3: return OPA_LINK_WIDTH_3X;
+	case 4: return OPA_LINK_WIDTH_4X;
 	default:
 		dd_dev_info(dd, "%s: invalid width %d, using 4\n",
 			    __func__, width);
-		/* fall through */
-	case 4: return OPA_LINK_WIDTH_4X;
+		return OPA_LINK_WIDTH_4X;
 	}
 }
 
@@ -7376,12 +7376,13 @@ static void get_link_widths(struct hfi1_devdata *dd, u16 *tx_width,
 		case 0:
 			dd->pport[0].link_speed_active = OPA_LINK_SPEED_12_5G;
 			break;
+		case 1:
+			dd->pport[0].link_speed_active = OPA_LINK_SPEED_25G;
+			break;
 		default:
 			dd_dev_err(dd,
 				   "%s: unexpected max rate %d, using 25Gb\n",
 				   __func__, (int)max_rate);
-			/* fall through */
-		case 1:
 			dd->pport[0].link_speed_active = OPA_LINK_SPEED_25G;
 			break;
 		}
@@ -12878,11 +12879,6 @@ static int init_cntrs(struct hfi1_devdata *dd)
 static u32 chip_to_opa_lstate(struct hfi1_devdata *dd, u32 chip_lstate)
 {
 	switch (chip_lstate) {
-	default:
-		dd_dev_err(dd,
-			   "Unknown logical state 0x%x, reporting IB_PORT_DOWN\n",
-			   chip_lstate);
-		/* fall through */
 	case LSTATE_DOWN:
 		return IB_PORT_DOWN;
 	case LSTATE_INIT:
@@ -12891,6 +12887,11 @@ static u32 chip_to_opa_lstate(struct hfi1_devdata *dd, u32 chip_lstate)
 		return IB_PORT_ARMED;
 	case LSTATE_ACTIVE:
 		return IB_PORT_ACTIVE;
+	default:
+		dd_dev_err(dd,
+			   "Unknown logical state 0x%x, reporting IB_PORT_DOWN\n",
+			   chip_lstate);
+		return IB_PORT_DOWN;
 	}
 }
 
@@ -12898,10 +12899,6 @@ u32 chip_to_opa_pstate(struct hfi1_devdata *dd, u32 chip_pstate)
 {
 	/* look at the HFI meta-states only */
 	switch (chip_pstate & 0xf0) {
-	default:
-		dd_dev_err(dd, "Unexpected chip physical state of 0x%x\n",
-			   chip_pstate);
-		/* fall through */
 	case PLS_DISABLED:
 		return IB_PORTPHYSSTATE_DISABLED;
 	case PLS_OFFLINE:
@@ -12914,6 +12911,10 @@ u32 chip_to_opa_pstate(struct hfi1_devdata *dd, u32 chip_pstate)
 		return IB_PORTPHYSSTATE_LINKUP;
 	case PLS_PHYTEST:
 		return IB_PORTPHYSSTATE_PHY_TEST;
+	default:
+		dd_dev_err(dd, "Unexpected chip physical state of 0x%x\n",
+			   chip_pstate);
+		return IB_PORTPHYSSTATE_DISABLED;
 	}
 }
 
-- 
2.27.0


             reply	other threads:[~2020-07-09 23:47 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-09 23:52 Gustavo A. R. Silva [this message]
2020-07-12 17:44 ` [PATCH v2][next] IB/hfi1: Remove unnecessary fall-through markings Leon Romanovsky
2020-07-16 18:41 ` Jason Gunthorpe
2020-07-16 18:53   ` Gustavo A. R. Silva

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200709235250.GA26678@embeddedor \
    --to=gustavoars@kernel.org \
    --cc=dennis.dalessandro@intel.com \
    --cc=dledford@redhat.com \
    --cc=jgg@ziepe.ca \
    --cc=leon@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    --cc=mike.marciniszyn@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).