LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Matt Ranostay <matt.ranostay@konsulko.com>
Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de>,
	Rob Herring <robh+dt@kernel.org>,
	"open list:IIO SUBSYSTEM AND DRIVERS" <linux-iio@vger.kernel.org>,
	devicetree@vger.kernel.org,
	open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2] Replace HTTP links with HTTPS ones: Documentation/devicetree/bindings/iio
Date: Sun, 12 Jul 2020 14:22:17 +0100
Message-ID: <20200712142217.1fcd2d08@archlinux> (raw)
In-Reply-To: <CAJCx=gmv67jh2aP14U-Jr=+SGPtzE8z5K-ax5dn9yM74SaVj+g@mail.gmail.com>

On Sat, 4 Jul 2020 16:05:01 -0700
Matt Ranostay <matt.ranostay@konsulko.com> wrote:

> On Sat, Jul 4, 2020 at 12:34 PM Alexander A. Klimov
> <grandmaster@al2klimov.de> wrote:
> >
> > Rationale:
> > Reduces attack surface on kernel devs opening the links for MITM
> > as HTTPS traffic is much harder to manipulate.
> >  
> 
> With regards to the drivers that I've authored the changes look good to me.
> 
> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Applied. Thanks
> 
> 
> > Deterministic algorithm:
> > For each file:
> >   If not .svg:
> >     For each line:
> >       If doesn't contain `\bxmlns\b`:
> >         For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
> >           If both the HTTP and HTTPS versions
> >           return 200 OK and serve the same content:
> >             Replace HTTP with HTTPS.
> >
> > Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
> > ---
> >  Changes in v2:
> >  Addressed https://lore.kernel.org/linux-iio/20200704173459.78ceec60@archlinux/
> >
> >  Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml  | 4 ++--
> >  Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt      | 2 +-
> >  Documentation/devicetree/bindings/iio/iio-bindings.txt        | 2 +-
> >  Documentation/devicetree/bindings/iio/light/apds9300.txt      | 2 +-
> >  Documentation/devicetree/bindings/iio/light/apds9960.txt      | 2 +-
> >  Documentation/devicetree/bindings/iio/light/opt3001.txt       | 2 +-
> >  Documentation/devicetree/bindings/iio/light/vl6180.txt        | 2 +-
> >  .../devicetree/bindings/iio/potentiometer/mcp41010.txt        | 2 +-
> >  .../devicetree/bindings/iio/potentiostat/lmp91000.txt         | 4 ++--
> >  .../devicetree/bindings/iio/pressure/asc,dlhl60d.yaml         | 2 +-
> >  .../devicetree/bindings/iio/proximity/devantech-srf04.yaml    | 4 ++--
> >  11 files changed, 14 insertions(+), 14 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> > index d124eba1ce54..fd4eaa3d0ab4 100644
> > --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> > +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> > @@ -12,8 +12,8 @@ maintainers:
> >  description: |
> >    Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers that supports
> >    both I2C & SPI interfaces.
> > -    http://www.analog.com/en/products/mems/accelerometers/adxl345.html
> > -    http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
> > +    https://www.analog.com/en/products/mems/accelerometers/adxl345.html
> > +    https://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
> >
> >  properties:
> >    compatible:
> > diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> > index 639c94ed83e9..17af395b99d9 100644
> > --- a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> > +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> > @@ -6,7 +6,7 @@ Is is programmable through an SPI interface.
> >
> >  The internal DACs are loaded when the LOADDACS pin is pulled down.
> >
> > -http://www.ti.com/lit/ds/sbas106/sbas106.pdf
> > +https://www.ti.com/lit/ds/sbas106/sbas106.pdf
> >
> >  Required Properties:
> >  - compatible: Should be one of:
> > diff --git a/Documentation/devicetree/bindings/iio/iio-bindings.txt b/Documentation/devicetree/bindings/iio/iio-bindings.txt
> > index af33267727f4..aa63cac7323e 100644
> > --- a/Documentation/devicetree/bindings/iio/iio-bindings.txt
> > +++ b/Documentation/devicetree/bindings/iio/iio-bindings.txt
> > @@ -9,7 +9,7 @@ specifier is an array of one or more cells identifying the IIO
> >  output on a device. The length of an IIO specifier is defined by the
> >  value of a #io-channel-cells property in the IIO provider node.
> >
> > -[1] http://marc.info/?l=linux-iio&m=135902119507483&w=2
> > +[1] https://marc.info/?l=linux-iio&m=135902119507483&w=2
> >
> >  ==IIO providers==
> >
> > diff --git a/Documentation/devicetree/bindings/iio/light/apds9300.txt b/Documentation/devicetree/bindings/iio/light/apds9300.txt
> > index aa199e09a493..3aa6db3ee99d 100644
> > --- a/Documentation/devicetree/bindings/iio/light/apds9300.txt
> > +++ b/Documentation/devicetree/bindings/iio/light/apds9300.txt
> > @@ -1,6 +1,6 @@
> >  * Avago APDS9300 ambient light sensor
> >
> > -http://www.avagotech.com/docs/AV02-1077EN
> > +https://www.avagotech.com/docs/AV02-1077EN
> >
> >  Required properties:
> >
> > diff --git a/Documentation/devicetree/bindings/iio/light/apds9960.txt b/Documentation/devicetree/bindings/iio/light/apds9960.txt
> > index 3af325ad194b..c53ddb81c4aa 100644
> > --- a/Documentation/devicetree/bindings/iio/light/apds9960.txt
> > +++ b/Documentation/devicetree/bindings/iio/light/apds9960.txt
> > @@ -1,6 +1,6 @@
> >  * Avago APDS9960 gesture/RGB/ALS/proximity sensor
> >
> > -http://www.avagotech.com/docs/AV02-4191EN
> > +https://www.avagotech.com/docs/AV02-4191EN
> >
> >  Required properties:
> >
> > diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt
> > index 47b13eb8f4ec..9e6f2998e751 100644
> > --- a/Documentation/devicetree/bindings/iio/light/opt3001.txt
> > +++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt
> > @@ -6,7 +6,7 @@ the optional generation of IIO events on rising/falling light threshold changes
> >  requires the use of interrupts. Without interrupts, only the simple reading
> >  of the current light value is supported through the IIO API.
> >
> > -http://www.ti.com/product/opt3001
> > +https://www.ti.com/product/opt3001
> >
> >  Required properties:
> >    - compatible: should be "ti,opt3001"
> > diff --git a/Documentation/devicetree/bindings/iio/light/vl6180.txt b/Documentation/devicetree/bindings/iio/light/vl6180.txt
> > index 2c52952715a0..fb9137d85df9 100644
> > --- a/Documentation/devicetree/bindings/iio/light/vl6180.txt
> > +++ b/Documentation/devicetree/bindings/iio/light/vl6180.txt
> > @@ -1,6 +1,6 @@
> >  STMicro VL6180 -  ALS, range and proximity sensor
> >
> > -Link to datasheet: http://www.st.com/resource/en/datasheet/vl6180x.pdf
> > +Link to datasheet: https://www.st.com/resource/en/datasheet/vl6180x.pdf
> >
> >  Required properties:
> >
> > diff --git a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> > index 566711b9950c..4f245e8469fd 100644
> > --- a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> > +++ b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> > @@ -1,7 +1,7 @@
> >  * Microchip MCP41010/41050/41100/42010/42050/42100 Digital Potentiometer
> >
> >  Datasheet publicly available at:
> > -http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
> > +https://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
> >
> >  The node for this driver must be a child node of a SPI controller, hence
> >  all mandatory properties described in
> > diff --git a/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt b/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
> > index e6d0c2eb345c..f3ab02b0dd41 100644
> > --- a/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
> > +++ b/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
> > @@ -1,7 +1,7 @@
> >  * Texas Instruments LMP91000 series of potentiostats
> >
> > -LMP91000: http://www.ti.com/lit/ds/symlink/lmp91000.pdf
> > -LMP91002: http://www.ti.com/lit/ds/symlink/lmp91002.pdf
> > +LMP91000: https://www.ti.com/lit/ds/symlink/lmp91000.pdf
> > +LMP91002: https://www.ti.com/lit/ds/symlink/lmp91002.pdf
> >
> >  Required properties:
> >
> > diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> > index 64c18f1693f0..be2be4b556db 100644
> > --- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> > +++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> > @@ -13,7 +13,7 @@ description: |
> >    Bindings for the All Sensors DLH series pressure sensors.
> >
> >    Specifications about the sensors can be found at:
> > -    http://www.allsensors.com/cad/DS-0355_Rev_B.PDF
> > +    https://www.allsensors.com/cad/DS-0355_Rev_B.PDF
> >
> >  properties:
> >    compatible:
> > diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> > index f86f8b23ef18..ce795279839e 100644
> > --- a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> > +++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> > @@ -17,9 +17,9 @@ description: |
> >      until it is received once again
> >
> >    Specifications about the devices can be found at:
> > -  http://www.robot-electronics.co.uk/htm/srf04tech.htm
> > +  https://www.robot-electronics.co.uk/htm/srf04tech.htm
> >
> > -  http://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
> > +  https://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
> >
> >  properties:
> >    compatible:
> > --
> > 2.27.0
> >  


      reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-03 18:57 [PATCH] " Alexander A. Klimov
2020-07-04 16:34 ` Jonathan Cameron
2020-07-04 19:33   ` [PATCH v2] " Alexander A. Klimov
2020-07-04 23:05     ` Matt Ranostay
2020-07-12 13:22       ` Jonathan Cameron [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200712142217.1fcd2d08@archlinux \
    --to=jic23@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=grandmaster@al2klimov.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=matt.ranostay@konsulko.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git