Re: [PATCH v5 05/10] arm64: dts: actions: limit address range for pinctrl node

[Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>]

On Thu, Jul 02, 2020 at 08:22:51PM +0530, Amit Singh Tomar wrote:
> After commit 7cdf8446ed1d ("arm64: dts: actions: Add pinctrl node for
> Actions Semi S700") following error has been observed while booting
> Linux on Cubieboard7-lite(based on S700 SoC).
> 
> [    0.257415] pinctrl-s700 e01b0000.pinctrl: can't request region for
> resource [mem 0xe01b0000-0xe01b0fff]
> [    0.266902] pinctrl-s700: probe of e01b0000.pinctrl failed with error -16
> 
> This is due to the fact that memory range for "sps" power domain controller
> clashes with pinctrl.
> 
> One way to fix it, is to limit pinctrl address range which is safe
> to do as current pinctrl driver uses address range only up to 0x100.
> 
> This commit limits the pinctrl address range to 0x100 so that it doesn't
> conflict with sps range.
> 
> Fixes: 7cdf8446ed1d ("arm64: dts: actions: Add pinctrl node for Actions
> Semi S700")
> 
> Suggested-by: Andre Przywara <andre.przywara@arm.com>
> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> ---
> Changes since v4:
> 	* Reordered it from 04/10 to 05/10.
> Changes since v3:
>         * No change.
> Changes since v2:
>         * this is no more don't merge and fixed
>           the broken S700 boot by limiting pinctrl
>           address range.
>         * Modified the subject to reflect the changes.
> Changes since v1:
>         * No change.
> Changes since RFC:
>         * kept as do not merge.
> ---
>  arch/arm64/boot/dts/actions/s700.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
> index 2006ad5424fa..f8eb72bb4125 100644
> --- a/arch/arm64/boot/dts/actions/s700.dtsi
> +++ b/arch/arm64/boot/dts/actions/s700.dtsi
> @@ -231,7 +231,7 @@
>  
>  		pinctrl: pinctrl@e01b0000 {
>  			compatible = "actions,s700-pinctrl";
> -			reg = <0x0 0xe01b0000 0x0 0x1000>;
> +			reg = <0x0 0xe01b0000 0x0 0x100>;
>  			clocks = <&cmu CLK_GPIO>;
>  			gpio-controller;
>  			gpio-ranges = <&pinctrl 0 0 136>;
> -- 
> 2.7.4
>