From: "Alexander A. Klimov" <grandmaster@al2klimov.de>
To: miquel.raynal@bootlin.com, richard@nod.at, vigneshr@ti.com,
robh+dt@kernel.org, linus.walleij@linaro.org, arnd@arndb.de,
linux-mtd@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de>
Subject: [PATCH] mtd: Replace HTTP links with HTTPS ones
Date: Mon, 13 Jul 2020 18:54:08 +0200 [thread overview]
Message-ID: <20200713165408.36229-1-grandmaster@al2klimov.de> (raw)
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
---
Continuing my work started at 93431e0607e5.
See also: git log --oneline '--author=Alexander A. Klimov <grandmaster@al2klimov.de>' v5.7..master
(Actually letting a shell for loop submit all this stuff for me.)
If there are any URLs to be removed completely or at least not just HTTPSified:
Just clearly say so and I'll *undo my change*.
See also: https://lkml.org/lkml/2020/6/27/64
If there are any valid, but yet not changed URLs:
See: https://lkml.org/lkml/2020/6/26/837
If you apply the patch, please let me know.
Sorry again to all maintainers who complained about subject lines.
Now I realized that you want an actually perfect prefixes,
not just subsystem ones.
I tried my best...
And yes, *I could* (at least half-)automate it.
Impossible is nothing! :)
Documentation/devicetree/bindings/mtd/davinci-nand.txt | 4 ++--
drivers/mtd/chips/Kconfig | 2 +-
drivers/mtd/maps/Kconfig | 2 +-
drivers/mtd/maps/sc520cdp.c | 2 +-
4 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/mtd/davinci-nand.txt b/Documentation/devicetree/bindings/mtd/davinci-nand.txt
index cfb18abe6001..edebeae1f5b3 100644
--- a/Documentation/devicetree/bindings/mtd/davinci-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/davinci-nand.txt
@@ -4,8 +4,8 @@ This file provides information, what the device node for the davinci/keystone
NAND interface contains.
Documentation:
-Davinci DM646x - http://www.ti.com/lit/ug/sprueq7c/sprueq7c.pdf
-Kestone - http://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf
+Davinci DM646x - https://www.ti.com/lit/ug/sprueq7c/sprueq7c.pdf
+Kestone - https://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf
Required properties:
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index a7e47e068ad9..aef14990e5f7 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -11,7 +11,7 @@ config MTD_CFI
AMD and other flash manufactures that provides a universal method
for probing the capabilities of flash devices. If you wish to
support any device that is CFI-compliant, you need to enable this
- option. Visit <http://www.amd.com/products/nvd/overview/cfi.html>
+ option. Visit <https://www.amd.com/products/nvd/overview/cfi.html>
for more information on CFI.
config MTD_JEDECPROBE
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index b28225a7c4f3..fd37553f1b07 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -310,7 +310,7 @@ config MTD_DC21285
help
This provides a driver for the flash accessed using Intel's
21285 bridge used with Intel's StrongARM processors. More info at
- <http://www.intel.com/design/bridge/docs/21285_documentation.htm>.
+ <https://www.intel.com/design/bridge/docs/21285_documentation.htm>.
config MTD_IXP4XX
tristate "CFI Flash device mapped on Intel IXP4xx based systems"
diff --git a/drivers/mtd/maps/sc520cdp.c b/drivers/mtd/maps/sc520cdp.c
index 9902b37e18b4..8ef7aec634c7 100644
--- a/drivers/mtd/maps/sc520cdp.c
+++ b/drivers/mtd/maps/sc520cdp.c
@@ -6,7 +6,7 @@
* The SC520CDP is an evaluation board for the Elan SC520 processor available
* from AMD. It has two banks of 32-bit Flash ROM, each 8 Megabytes in size,
* and up to 512 KiB of 8-bit DIL Flash ROM.
- * For details see http://www.amd.com/products/epd/desiging/evalboards/18.elansc520/520_cdp_brief/index.html
+ * For details see https://www.amd.com/products/epd/desiging/evalboards/18.elansc520/520_cdp_brief/index.html
*/
#include <linux/module.h>
--
2.27.0
next reply other threads:[~2020-07-13 16:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-13 16:54 Alexander A. Klimov [this message]
2020-07-21 1:52 ` [PATCH] mtd: Replace HTTP links with HTTPS ones Rob Herring
2020-08-02 20:18 ` Richard Weinberger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200713165408.36229-1-grandmaster@al2klimov.de \
--to=grandmaster@al2klimov.de \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).