LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Cc: linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
	bjorn.andersson@linaro.org, tsoni@codeaurora.org,
	psodagud@codeaurora.org, sidgup@codeaurora.org
Subject: Re: [PATCH v7 3/4] remoteproc: Add inline coredump functionality
Date: Tue, 14 Jul 2020 11:53:32 -0600
Message-ID: <20200714175332.GB1407705@xps15> (raw)
In-Reply-To: <1594326716-15474-4-git-send-email-rishabhb@codeaurora.org>

On Thu, Jul 09, 2020 at 01:31:55PM -0700, Rishabh Bhatnagar wrote:
> The current coredump implementation uses vmalloc area to copy
> all the segments. But this might put strain on low memory targets
> as the firmware size sometimes is in tens of MBs. The situation
> becomes worse if there are multiple remote processors undergoing
> recovery at the same time. This patch adds inline coredump
> functionality that avoids extra memory usage. This requires
> recovery to be halted until data is read by userspace and free
> function is called. Also modify the qcom_q6v5_mss driver to include
> size and offset in the segment dump function.
> 
> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
> Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
> ---
>  drivers/remoteproc/qcom_q6v5_mss.c       |  11 ++-
>  drivers/remoteproc/remoteproc_coredump.c | 160 +++++++++++++++++++++++++++----
>  include/linux/remoteproc.h               |  21 +++-
>  3 files changed, 166 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
> index c6ce032..79df354 100644
> --- a/drivers/remoteproc/qcom_q6v5_mss.c
> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> @@ -1199,11 +1199,12 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
>  
>  static void qcom_q6v5_dump_segment(struct rproc *rproc,
>  				   struct rproc_dump_segment *segment,
> -				   void *dest)
> +				   void *dest, size_t cp_offset, size_t size)

Now that I'm taking another look at this, refactoring qcom_q6v5_dump_segment()
should be in another patch - please split them.

>  {
>  	int ret = 0;
>  	struct q6v5 *qproc = rproc->priv;
>  	int offset = segment->da - qproc->mpss_reloc;
> +	size_t cp_size = size ? size : segment->size;

I can't find a scenario where size is 0 - can you explain when 
such condition occurs?

Thanks,
Mathieu 


>  	void *ptr = NULL;
>  
>  	/* Unlock mba before copying segments */
> @@ -1219,16 +1220,16 @@ static void qcom_q6v5_dump_segment(struct rproc *rproc,
>  	}
>  
>  	if (!ret)
> -		ptr = ioremap_wc(qproc->mpss_phys + offset, segment->size);
> +		ptr = ioremap_wc(qproc->mpss_phys + offset + cp_offset, cp_size);
>  
>  	if (ptr) {
> -		memcpy(dest, ptr, segment->size);
> +		memcpy(dest, ptr, cp_size);
>  		iounmap(ptr);
>  	} else {
> -		memset(dest, 0xff, segment->size);
> +		memset(dest, 0xff, cp_size);
>  	}
>  
> -	qproc->current_dump_size += segment->size;
> +	qproc->current_dump_size += cp_size;
>  
>  	/* Reclaim mba after copying segments */
>  	if (qproc->current_dump_size == qproc->total_dump_size) {
> diff --git a/drivers/remoteproc/remoteproc_coredump.c b/drivers/remoteproc/remoteproc_coredump.c
> index ded0244..646886f 100644
> --- a/drivers/remoteproc/remoteproc_coredump.c
> +++ b/drivers/remoteproc/remoteproc_coredump.c
> @@ -5,6 +5,7 @@
>   * Copyright (c) 2020, The Linux Foundation. All rights reserved.
>   */
>  
> +#include <linux/completion.h>
>  #include <linux/devcoredump.h>
>  #include <linux/device.h>
>  #include <linux/kernel.h>
> @@ -12,6 +13,12 @@
>  #include "remoteproc_internal.h"
>  #include "remoteproc_elf_helpers.h"
>  
> +struct rproc_coredump_state {
> +	struct rproc *rproc;
> +	void *header;
> +	struct completion dump_done;
> +};
> +
>  /**
>   * rproc_coredump_cleanup() - clean up dump_segments list
>   * @rproc: the remote processor handle
> @@ -72,7 +79,8 @@ int rproc_coredump_add_custom_segment(struct rproc *rproc,
>  				      dma_addr_t da, size_t size,
>  				      void (*dumpfn)(struct rproc *rproc,
>  						     struct rproc_dump_segment *segment,
> -						     void *dest),
> +						     void *dest, size_t offset,
> +						     size_t size),
>  				      void *priv)
>  {
>  	struct rproc_dump_segment *segment;
> @@ -114,12 +122,110 @@ int rproc_coredump_set_elf_info(struct rproc *rproc, u8 class, u16 machine)
>  }
>  EXPORT_SYMBOL(rproc_coredump_set_elf_info);
>  
> +static void rproc_coredump_free(void *data)
> +{
> +	struct rproc_coredump_state *dump_state = data;
> +
> +	complete(&dump_state->dump_done);
> +	vfree(dump_state->header);
> +}
> +
> +static void *rproc_coredump_find_segment(loff_t user_offset,
> +					 struct list_head *segments,
> +					 size_t *data_left)
> +{
> +	struct rproc_dump_segment *segment;
> +
> +	list_for_each_entry(segment, segments, node) {
> +		if (user_offset < segment->size) {
> +			*data_left = segment->size - user_offset;
> +			return segment;
> +		}
> +		user_offset -= segment->size;
> +	}
> +
> +	*data_left = 0;
> +	return NULL;
> +}
> +
> +static void rproc_copy_segment(struct rproc *rproc, void *dest,
> +			       struct rproc_dump_segment *segment,
> +			       size_t offset, size_t size)
> +{
> +	void *ptr;
> +
> +	if (segment->dump) {
> +		segment->dump(rproc, segment, dest, offset, size);
> +	} else {
> +		ptr = rproc_da_to_va(rproc, segment->da + offset, size);
> +		if (!ptr) {
> +			dev_err(&rproc->dev,
> +				"invalid copy request for segment %pad with offset %zu and size %zu)\n",
> +				&segment->da, offset, size);
> +			memset(dest, 0xff, size);
> +		} else {
> +			memcpy(dest, ptr, size);
> +		}
> +	}
> +}
> +
> +static ssize_t rproc_coredump_read(char *buffer, loff_t offset, size_t count,
> +				   void *data, size_t header_sz)
> +{
> +	size_t seg_data, bytes_left = count;
> +	ssize_t copy_sz;
> +	struct rproc_dump_segment *seg;
> +	struct rproc_coredump_state *dump_state = data;
> +	struct rproc *rproc = dump_state->rproc;
> +	void *elfcore = dump_state->header;
> +
> +	/* Copy the vmalloc'ed header first. */
> +	if (offset < header_sz) {
> +		copy_sz = memory_read_from_buffer(buffer, count, &offset,
> +						  elfcore, header_sz);
> +
> +		return copy_sz;
> +	}
> +
> +	/*
> +	 * Find out the segment memory chunk to be copied based on offset.
> +	 * Keep copying data until count bytes are read.
> +	 */
> +	while (bytes_left) {
> +		seg = rproc_coredump_find_segment(offset - header_sz,
> +						  &rproc->dump_segments,
> +						  &seg_data);
> +		/* EOF check */
> +		if (!seg) {
> +			dev_info(&rproc->dev, "Ramdump done, %lld bytes read",
> +				 offset);
> +			break;
> +		}
> +
> +		copy_sz = min_t(size_t, bytes_left, seg_data);
> +
> +		rproc_copy_segment(rproc, buffer, seg, seg->size - seg_data,
> +				   copy_sz);
> +
> +		offset += copy_sz;
> +		buffer += copy_sz;
> +		bytes_left -= copy_sz;
> +	}
> +
> +	return count - bytes_left;
> +}
> +
>  /**
>   * rproc_coredump() - perform coredump
>   * @rproc:	rproc handle
>   *
>   * This function will generate an ELF header for the registered segments
> - * and create a devcoredump device associated with rproc.
> + * and create a devcoredump device associated with rproc. Based on the
> + * coredump configuration this function will directly copy the segments
> + * from device memory to userspace or copy segments from device memory to
> + * a separate buffer, which can then be read by userspace.
> + * The first approach avoids using extra vmalloc memory. But it will stall
> + * recovery flow until dump is read by userspace.
>   */
>  void rproc_coredump(struct rproc *rproc)
>  {
> @@ -129,11 +235,13 @@ void rproc_coredump(struct rproc *rproc)
>  	size_t data_size;
>  	size_t offset;
>  	void *data;
> -	void *ptr;
>  	u8 class = rproc->elf_class;
>  	int phnum = 0;
> +	struct rproc_coredump_state dump_state;
> +	enum rproc_dump_mechanism dump_conf = rproc->dump_conf;
>  
> -	if (list_empty(&rproc->dump_segments))
> +	if (list_empty(&rproc->dump_segments) ||
> +	    dump_conf == RPROC_COREDUMP_DISABLED)
>  		return;
>  
>  	if (class == ELFCLASSNONE) {
> @@ -143,7 +251,14 @@ void rproc_coredump(struct rproc *rproc)
>  
>  	data_size = elf_size_of_hdr(class);
>  	list_for_each_entry(segment, &rproc->dump_segments, node) {
> -		data_size += elf_size_of_phdr(class) + segment->size;
> +		/*
> +		 * For default configuration buffer includes headers & segments.
> +		 * For inline dump buffer just includes headers as segments are
> +		 * directly read from device memory.
> +		 */
> +		data_size += elf_size_of_phdr(class);
> +		if (dump_conf == RPROC_COREDUMP_DEFAULT)
> +			data_size += segment->size;
>  
>  		phnum++;
>  	}
> @@ -182,23 +297,30 @@ void rproc_coredump(struct rproc *rproc)
>  		elf_phdr_set_p_flags(class, phdr, PF_R | PF_W | PF_X);
>  		elf_phdr_set_p_align(class, phdr, 0);
>  
> -		if (segment->dump) {
> -			segment->dump(rproc, segment, data + offset);
> -		} else {
> -			ptr = rproc_da_to_va(rproc, segment->da, segment->size);
> -			if (!ptr) {
> -				dev_err(&rproc->dev,
> -					"invalid coredump segment (%pad, %zu)\n",
> -					&segment->da, segment->size);
> -				memset(data + offset, 0xff, segment->size);
> -			} else {
> -				memcpy(data + offset, ptr, segment->size);
> -			}
> -		}
> +		if (dump_conf == RPROC_COREDUMP_DEFAULT)
> +			rproc_copy_segment(rproc, data + offset, segment, 0,
> +					   segment->size);
>  
>  		offset += elf_phdr_get_p_filesz(class, phdr);
>  		phdr += elf_size_of_phdr(class);
>  	}
>  
> -	dev_coredumpv(&rproc->dev, data, data_size, GFP_KERNEL);
> +	if (dump_conf == RPROC_COREDUMP_DEFAULT) {
> +		dev_coredumpv(&rproc->dev, data, data_size, GFP_KERNEL);
> +		return;
> +	}
> +
> +	/* Initialize the dump state struct to be used by rproc_coredump_read */
> +	dump_state.rproc = rproc;
> +	dump_state.header = data;
> +	init_completion(&dump_state.dump_done);
> +
> +	dev_coredumpm(&rproc->dev, NULL, &dump_state, data_size, GFP_KERNEL,
> +		      rproc_coredump_read, rproc_coredump_free);
> +
> +	/*
> +	 * Wait until the dump is read and free is called. Data is freed
> +	 * by devcoredump framework automatically after 5 minutes.
> +	 */
> +	wait_for_completion(&dump_state.dump_done);
>  }
> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> index e7b7bab..38d037d 100644
> --- a/include/linux/remoteproc.h
> +++ b/include/linux/remoteproc.h
> @@ -435,6 +435,20 @@ enum rproc_crash_type {
>  };
>  
>  /**
> + * enum rproc_dump_mechanism - Coredump options for core
> + * @RPROC_COREDUMP_DEFAULT:	Copy dump to separate buffer and carry on with
> +				recovery
> + * @RPROC_COREDUMP_INLINE:	Read segments directly from device memory. Stall
> +				recovery until all segments are read
> + * @RPROC_COREDUMP_DISABLED:	Don't perform any dump
> + */
> +enum rproc_dump_mechanism {
> +	RPROC_COREDUMP_DEFAULT,
> +	RPROC_COREDUMP_INLINE,
> +	RPROC_COREDUMP_DISABLED,
> +};
> +
> +/**
>   * struct rproc_dump_segment - segment info from ELF header
>   * @node:	list node related to the rproc segment list
>   * @da:		device address of the segment
> @@ -451,7 +465,7 @@ struct rproc_dump_segment {
>  
>  	void *priv;
>  	void (*dump)(struct rproc *rproc, struct rproc_dump_segment *segment,
> -		     void *dest);
> +		     void *dest, size_t offset, size_t size);
>  	loff_t offset;
>  };
>  
> @@ -466,6 +480,7 @@ struct rproc_dump_segment {
>   * @dev: virtual device for refcounting and common remoteproc behavior
>   * @power: refcount of users who need this rproc powered up
>   * @state: state of the device
> + * @dump_conf: Currently selected coredump configuration
>   * @lock: lock which protects concurrent manipulations of the rproc
>   * @dbg_dir: debugfs directory of this rproc device
>   * @traces: list of trace buffers
> @@ -499,6 +514,7 @@ struct rproc {
>  	struct device dev;
>  	atomic_t power;
>  	unsigned int state;
> +	enum rproc_dump_mechanism dump_conf;
>  	struct mutex lock;
>  	struct dentry *dbg_dir;
>  	struct list_head traces;
> @@ -630,7 +646,8 @@ int rproc_coredump_add_custom_segment(struct rproc *rproc,
>  				      dma_addr_t da, size_t size,
>  				      void (*dumpfn)(struct rproc *rproc,
>  						     struct rproc_dump_segment *segment,
> -						     void *dest),
> +						     void *dest, size_t offset,
> +						     size_t size),
>  				      void *priv);
>  int rproc_coredump_set_elf_info(struct rproc *rproc, u8 class, u16 machine);
>  
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

  reply index

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-09 20:31 [PATCH v7 0/4] Extend " Rishabh Bhatnagar
2020-07-09 20:31 ` [PATCH v7 1/4] remoteproc: Move coredump functionality to a new file Rishabh Bhatnagar
2020-07-09 20:31 ` [PATCH v1 2/4] remoteproc: qcom_q6v5_mss: Replace mask based tracking with size Rishabh Bhatnagar
2020-07-14 17:18   ` Mathieu Poirier
2020-07-14 18:12     ` Sibi Sankar
2020-07-16  8:10     ` Sibi Sankar
2020-07-16 18:24       ` rishabhb
2020-07-20 16:57   ` Mathieu Poirier
2020-07-09 20:31 ` [PATCH v7 3/4] remoteproc: Add inline coredump functionality Rishabh Bhatnagar
2020-07-14 17:53   ` Mathieu Poirier [this message]
2020-07-15 19:22     ` rishabhb
2020-07-15 21:55       ` Mathieu Poirier
2020-07-16  8:25   ` Sibi Sankar
2020-07-16 18:25     ` rishabhb
2020-07-09 20:31 ` [PATCH v7 4/4] remoteproc: Add coredump debugfs entry Rishabh Bhatnagar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200714175332.GB1407705@xps15 \
    --to=mathieu.poirier@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=psodagud@codeaurora.org \
    --cc=rishabhb@codeaurora.org \
    --cc=sidgup@codeaurora.org \
    --cc=tsoni@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git