LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Sibi Sankar <sibis@codeaurora.org>
Cc: bjorn.andersson@linaro.org, agross@kernel.org,
	linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
	linux-kernel@vger.kernel.org, evgreen@chromium.org,
	ohad@wizery.com, linux-arm-msm-owner@vger.kernel.org
Subject: Re: [PATCH 2/3] remoteproc: qcom_q6v5_mss: Add MBA log extraction support
Date: Fri, 17 Jul 2020 20:08:13 +0530
Message-ID: <20200717143813.GA3301@Mani-XPS-13-9360> (raw)
In-Reply-To: <4f91a75852104dbeafea3af0c8673505@codeaurora.org>

On Thu, Jul 16, 2020 at 08:28:50PM +0530, Sibi Sankar wrote:
> On 2020-07-16 19:13, Manivannan Sadhasivam wrote:
> > Hi Sibi,
> > 
> > On Thu, Jul 16, 2020 at 06:06:29PM +0530, Sibi Sankar wrote:
> > > On SC7180 the MBA firmware stores the bootup text logs in a 4K segment
> > > at the beginning of the MBA region. Add support to extract the logs
> > > which will be useful to debug mba boot/authentication issues.
> > > 
> > > Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> > > ---
> > >  drivers/remoteproc/qcom_q6v5_mss.c | 41
> > > ++++++++++++++++++++++++++----
> > >  1 file changed, 36 insertions(+), 5 deletions(-)
> > > 
> > > diff --git a/drivers/remoteproc/qcom_q6v5_mss.c
> > > b/drivers/remoteproc/qcom_q6v5_mss.c
> > > index 95e21ed607cb9..4ddf084b2c6fc 100644
> > > --- a/drivers/remoteproc/qcom_q6v5_mss.c
> > > +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> > > @@ -9,6 +9,7 @@
> > > 
> > >  #include <linux/clk.h>
> > >  #include <linux/delay.h>
> > > +#include <linux/devcoredump.h>
> > >  #include <linux/dma-mapping.h>
> > >  #include <linux/interrupt.h>
> > >  #include <linux/kernel.h>
> > > @@ -37,6 +38,8 @@
> > > 
> > >  #define MPSS_CRASH_REASON_SMEM		421
> > > 
> > > +#define MBA_LOG_SIZE			SZ_4K
> > > +
> > >  /* RMB Status Register Values */
> > >  #define RMB_PBL_SUCCESS			0x1
> > > 
> > > @@ -139,6 +142,7 @@ struct rproc_hexagon_res {
> > >  	int version;
> > >  	bool need_mem_protection;
> > >  	bool has_alt_reset;
> > > +	bool has_mba_logs;
> > >  	bool has_spare_reg;
> > >  };
> > > 
> > > @@ -200,6 +204,7 @@ struct q6v5 {
> > >  	struct qcom_sysmon *sysmon;
> > >  	bool need_mem_protection;
> > >  	bool has_alt_reset;
> > > +	bool has_mba_logs;
> > >  	bool has_spare_reg;
> > >  	int mpss_perm;
> > >  	int mba_perm;
> > > @@ -518,6 +523,19 @@ static int q6v5_rmb_mba_wait(struct q6v5
> > > *qproc, u32 status, int ms)
> > >  	return val;
> > >  }
> > > 
> > > +static void q6v5_dump_mba_logs(struct q6v5 *qproc)
> > > +{
> > > +	struct rproc *rproc = qproc->rproc;
> > > +	void *data;
> > > +
> > > +	data = vmalloc(MBA_LOG_SIZE);
> > 
> > Is there any specific reason to use vmalloc for the size of 4K?
> 
> data is passed onto dev_coredumpv
> which takes ownership of the memory
> and would eventually do a vfree of the
> data.
> 

Ah, okay.

Thanks,
Mani

> > 
> > Thanks,
> > Mani
> > 
> > > +	if (!data)
> > > +		return;
> > > +
> > > +	memcpy(data, qproc->mba_region, MBA_LOG_SIZE);
> > > +	dev_coredumpv(&rproc->dev, data, MBA_LOG_SIZE, GFP_KERNEL);
> > > +}
> > > +
> > >  static int q6v5proc_reset(struct q6v5 *qproc)
> > >  {
> > >  	u32 val;
> > > @@ -838,6 +856,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
> > >  {
> > >  	int ret;
> > >  	int xfermemop_ret;
> > > +	bool mba_load_err = false;
> > > 
> > >  	qcom_q6v5_prepare(&qproc->q6v5);
> > > 
> > > @@ -931,7 +950,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
> > >  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_q6);
> > >  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem);
> > >  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
> > > -
> > > +	mba_load_err = true;
> > >  reclaim_mba:
> > >  	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm,
> > > true,
> > >  						false, qproc->mba_phys,
> > > @@ -939,6 +958,8 @@ static int q6v5_mba_load(struct q6v5 *qproc)
> > >  	if (xfermemop_ret) {
> > >  		dev_err(qproc->dev,
> > >  			"Failed to reclaim mba buffer, system may become unstable\n");
> > > +	} else if (qproc->has_mba_logs & mba_load_err) {
> > > +		q6v5_dump_mba_logs(qproc);
> > >  	}
> > > 
> > >  disable_active_clks:
> > > @@ -968,7 +989,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
> > >  	return ret;
> > >  }
> > > 
> > > -static void q6v5_mba_reclaim(struct q6v5 *qproc)
> > > +static void q6v5_mba_reclaim(struct q6v5 *qproc, bool err_path)
> > >  {
> > >  	int ret;
> > >  	u32 val;
> > > @@ -1006,6 +1027,9 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
> > >  				      qproc->mba_size);
> > >  	WARN_ON(ret);
> > > 
> > > +	if (qproc->has_mba_logs && err_path && !ret)
> > > +		q6v5_dump_mba_logs(qproc);
> > > +
> > >  	ret = qcom_q6v5_unprepare(&qproc->q6v5);
> > >  	if (ret) {
> > >  		q6v5_pds_disable(qproc, qproc->proxy_pds,
> > > @@ -1255,7 +1279,7 @@ static void qcom_q6v5_dump_segment(struct
> > > rproc *rproc,
> > >  						false, true,
> > >  						qproc->mpss_phys,
> > >  						qproc->mpss_size);
> > > -			q6v5_mba_reclaim(qproc);
> > > +			q6v5_mba_reclaim(qproc, false);
> > >  		}
> > >  	}
> > >  }
> > > @@ -1297,7 +1321,7 @@ static int q6v5_start(struct rproc *rproc)
> > >  	return 0;
> > > 
> > >  reclaim_mpss:
> > > -	q6v5_mba_reclaim(qproc);
> > > +	q6v5_mba_reclaim(qproc, true);
> > > 
> > >  	return ret;
> > >  }
> > > @@ -1313,7 +1337,7 @@ static int q6v5_stop(struct rproc *rproc)
> > >  	if (ret == -ETIMEDOUT)
> > >  		dev_err(qproc->dev, "timed out on wait\n");
> > > 
> > > -	q6v5_mba_reclaim(qproc);
> > > +	q6v5_mba_reclaim(qproc, false);
> > > 
> > >  	return 0;
> > >  }
> > > @@ -1717,6 +1741,7 @@ static int q6v5_probe(struct platform_device
> > > *pdev)
> > > 
> > >  	qproc->version = desc->version;
> > >  	qproc->need_mem_protection = desc->need_mem_protection;
> > > +	qproc->has_mba_logs = desc->has_mba_logs;
> > > 
> > >  	ret = qcom_q6v5_init(&qproc->q6v5, pdev, rproc,
> > > MPSS_CRASH_REASON_SMEM,
> > >  			     qcom_msa_handover);
> > > @@ -1808,6 +1833,7 @@ static const struct rproc_hexagon_res
> > > sc7180_mss = {
> > >  	},
> > >  	.need_mem_protection = true,
> > >  	.has_alt_reset = false,
> > > +	.has_mba_logs = true,
> > >  	.has_spare_reg = true,
> > >  	.version = MSS_SC7180,
> > >  };
> > > @@ -1843,6 +1869,7 @@ static const struct rproc_hexagon_res
> > > sdm845_mss = {
> > >  	},
> > >  	.need_mem_protection = true,
> > >  	.has_alt_reset = true,
> > > +	.has_mba_logs = true,
> > >  	.has_spare_reg = false,
> > >  	.version = MSS_SDM845,
> > >  };
> > > @@ -1870,6 +1897,7 @@ static const struct rproc_hexagon_res
> > > msm8998_mss = {
> > >  	},
> > >  	.need_mem_protection = true,
> > >  	.has_alt_reset = false,
> > > +	.has_mba_logs = false,
> > >  	.has_spare_reg = false,
> > >  	.version = MSS_MSM8998,
> > >  };
> > > @@ -1900,6 +1928,7 @@ static const struct rproc_hexagon_res
> > > msm8996_mss = {
> > >  	},
> > >  	.need_mem_protection = true,
> > >  	.has_alt_reset = false,
> > > +	.has_mba_logs = false,
> > >  	.has_spare_reg = false,
> > >  	.version = MSS_MSM8996,
> > >  };
> > > @@ -1933,6 +1962,7 @@ static const struct rproc_hexagon_res
> > > msm8916_mss = {
> > >  	},
> > >  	.need_mem_protection = false,
> > >  	.has_alt_reset = false,
> > > +	.has_mba_logs = false,
> > >  	.has_spare_reg = false,
> > >  	.version = MSS_MSM8916,
> > >  };
> > > @@ -1974,6 +2004,7 @@ static const struct rproc_hexagon_res
> > > msm8974_mss = {
> > >  	},
> > >  	.need_mem_protection = false,
> > >  	.has_alt_reset = false,
> > > +	.has_mba_logs = false,
> > >  	.has_spare_reg = false,
> > >  	.version = MSS_MSM8974,
> > >  };
> > > --
> > > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
> > > Forum,
> > > a Linux Foundation Collaborative Project
> > > 
> 
> -- 
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project.

  reply index

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-16 12:36 [PATCH 0/3] Add modem debug features Sibi Sankar
2020-07-16 12:36 ` [PATCH 1/3] remoteproc: qcom_q6v5_mss: Add modem debug policy support Sibi Sankar
2020-07-17  4:41   ` Bjorn Andersson
2020-07-17  5:07     ` Sibi Sankar
2020-07-16 12:36 ` [PATCH 2/3] remoteproc: qcom_q6v5_mss: Add MBA log extraction support Sibi Sankar
2020-07-16 13:43   ` Manivannan Sadhasivam
2020-07-16 14:58     ` Sibi Sankar
2020-07-17 14:38       ` Manivannan Sadhasivam [this message]
2020-07-17  4:57   ` Bjorn Andersson
2020-07-17  5:22     ` Sibi Sankar
2020-07-17  5:52       ` Bjorn Andersson
2020-07-16 12:36 ` [PATCH 3/3] remoteproc: qcom_q6v5_mss: Update MBA log info Sibi Sankar
2020-07-17  4:59   ` Bjorn Andersson
2020-07-17  5:28     ` Sibi Sankar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200717143813.GA3301@Mani-XPS-13-9360 \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=evgreen@chromium.org \
    --cc=linux-arm-msm-owner@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=ohad@wizery.com \
    --cc=sibis@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git