linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rich Felker <dalias@libc.org>
To: "Saheed O. Bolarinwa" <refactormyself@gmail.com>
Cc: helgaas@kernel.org, Yoshinori Sato <ysato@users.sourceforge.jp>,
	bjorn@helgaas.com, skhan@linuxfoundation.org,
	linux-pci@vger.kernel.org,
	linux-kernel-mentees@lists.linuxfoundation.org,
	linux-kernel@vger.kernel.org, linux-sh@vger.kernel.org
Subject: Re: [RFC PATCH 24/35] sh: Change PCIBIOS_SUCCESSFUL to 0
Date: Mon, 20 Jul 2020 17:41:28 -0400	[thread overview]
Message-ID: <20200720214128.GN14669@brightrain.aerifal.cx> (raw)
In-Reply-To: <20200713122247.10985-25-refactormyself@gmail.com>

On Mon, Jul 13, 2020 at 02:22:36PM +0200, Saheed O. Bolarinwa wrote:
> In reference to the PCI spec (Chapter 2), PCIBIOS* is an x86 concept.
> Their scope should be limited within arch/x86.
> 
> Change all PCIBIOS_SUCCESSFUL to 0
> 
> Signed-off-by: "Saheed O. Bolarinwa" <refactormyself@gmail.com>
> ---
>  arch/sh/drivers/pci/common.c        | 2 +-
>  arch/sh/drivers/pci/ops-dreamcast.c | 4 ++--
>  arch/sh/drivers/pci/ops-sh4.c       | 4 ++--
>  arch/sh/drivers/pci/ops-sh7786.c    | 8 ++++----
>  arch/sh/drivers/pci/pci.c           | 2 +-
>  5 files changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/sh/drivers/pci/common.c b/arch/sh/drivers/pci/common.c
> index fe163ecd0719..ee27cdfd3e68 100644
> --- a/arch/sh/drivers/pci/common.c
> +++ b/arch/sh/drivers/pci/common.c
> @@ -61,7 +61,7 @@ int __init pci_is_66mhz_capable(struct pci_channel *hose,
>  			continue;
>  		if (early_read_config_word(hose, top_bus, current_bus,
>  					   pci_devfn, PCI_VENDOR_ID, &vid) !=
> -		    PCIBIOS_SUCCESSFUL)
> +		    0)
>  			continue;
>  		if (vid == 0xffff)
>  			continue;
> diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c
> index 517a8a9702f6..431cd006951f 100644
> --- a/arch/sh/drivers/pci/ops-dreamcast.c
> +++ b/arch/sh/drivers/pci/ops-dreamcast.c
> @@ -56,7 +56,7 @@ static int gapspci_read(struct pci_bus *bus, unsigned int devfn, int where, int
>  	case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break;
>  	}
>  
> -        return PCIBIOS_SUCCESSFUL;
> +	return 0;
>  }
>  
>  static int gapspci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
> @@ -70,7 +70,7 @@ static int gapspci_write(struct pci_bus *bus, unsigned int devfn, int where, int
>  	case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
>  	}
>  
> -        return PCIBIOS_SUCCESSFUL;
> +	return 0;
>  }
>  
>  struct pci_ops gapspci_pci_ops = {
> diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c
> index a205be3bfc4a..4d757e5f38c6 100644
> --- a/arch/sh/drivers/pci/ops-sh4.c
> +++ b/arch/sh/drivers/pci/ops-sh4.c
> @@ -49,7 +49,7 @@ static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn,
>  		return PCIBIOS_FUNC_NOT_SUPPORTED;
>  	}
>  
> -	return PCIBIOS_SUCCESSFUL;
> +	return 0;
>  }
>  
>  /*
> @@ -90,7 +90,7 @@ static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn,
>  
>  	pci_write_reg(chan, data, SH4_PCIPDR);
>  
> -	return PCIBIOS_SUCCESSFUL;
> +	return 0;
>  }
>  
>  struct pci_ops sh4_pci_ops = {
> diff --git a/arch/sh/drivers/pci/ops-sh7786.c b/arch/sh/drivers/pci/ops-sh7786.c
> index a10f9f4ebd7f..7c329e467360 100644
> --- a/arch/sh/drivers/pci/ops-sh7786.c
> +++ b/arch/sh/drivers/pci/ops-sh7786.c
> @@ -52,7 +52,7 @@ static int sh7786_pcie_config_access(unsigned char access_type,
>  			else
>  				pci_write_reg(chan, *data, PCI_REG(reg));
>  
> -			return PCIBIOS_SUCCESSFUL;
> +			return 0;
>  		} else if (dev > 1)
>  			return PCIBIOS_DEVICE_NOT_FOUND;
>  	}
> @@ -83,7 +83,7 @@ static int sh7786_pcie_config_access(unsigned char access_type,
>  	/* Disable the configuration access */
>  	pci_write_reg(chan, 0, SH4A_PCIEPCTLR);
>  
> -	return PCIBIOS_SUCCESSFUL;
> +	return 0;
>  }
>  
>  static int sh7786_pcie_read(struct pci_bus *bus, unsigned int devfn,
> @@ -101,7 +101,7 @@ static int sh7786_pcie_read(struct pci_bus *bus, unsigned int devfn,
>  	raw_spin_lock_irqsave(&pci_config_lock, flags);
>  	ret = sh7786_pcie_config_access(PCI_ACCESS_READ, bus,
>  					devfn, where, &data);
> -	if (ret != PCIBIOS_SUCCESSFUL) {
> +	if (ret != 0) {
>  		*val = 0xffffffff;
>  		goto out;
>  	}
> @@ -137,7 +137,7 @@ static int sh7786_pcie_write(struct pci_bus *bus, unsigned int devfn,
>  	raw_spin_lock_irqsave(&pci_config_lock, flags);
>  	ret = sh7786_pcie_config_access(PCI_ACCESS_READ, bus,
>  					devfn, where, &data);
> -	if (ret != PCIBIOS_SUCCESSFUL)
> +	if (ret != 0)
>  		goto out;
>  
>  	dev_dbg(&bus->dev, "pcie-config-write: bus=%3d devfn=0x%04x "
> diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
> index c7784e156964..77130f035fdd 100644
> --- a/arch/sh/drivers/pci/pci.c
> +++ b/arch/sh/drivers/pci/pci.c
> @@ -204,7 +204,7 @@ pcibios_bus_report_status_early(struct pci_channel *hose,
>  			continue;
>  		ret = early_read_config_word(hose, top_bus, current_bus,
>  					     pci_devfn, PCI_STATUS, &status);
> -		if (ret != PCIBIOS_SUCCESSFUL)
> +		if (ret != 0)
>  			continue;
>  		if (status == 0xffff)
>  			continue;
> -- 
> 2.18.2

Acked-by: Rich Felker <dalias@libc.org>

(for both this and the following one in the series)

  reply	other threads:[~2020-07-20 21:41 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200713122247.10985-1-refactormyself@gmail.com>
2020-07-13 12:22 ` [RFC PATCH 01/35] xen-pciback: Change PCIBIOS_SUCCESSFUL to 0 Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 02/35] ssb: " Saheed O. Bolarinwa
2020-07-13 17:16   ` Larry Finger
2020-07-13 19:13     ` Saheed Bolarinwa
2020-07-13 18:29       ` Arnd Bergmann
2020-07-13 18:35       ` Larry Finger
2020-07-13 12:22 ` [RFC PATCH 03/35] scsi: ipr: " Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 04/35] scsi: ipr: Tidy Success/Failure checks Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 05/35] PCI: Change PCIBIOS_SUCCESSFUL to 0 Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 06/35] PCI: Tidy Success/Failure checks Saheed O. Bolarinwa
2020-07-13 13:59   ` Gustavo Pimentel
2020-07-13 12:22 ` [RFC PATCH 07/35] PCI: Change PCIBIOS_SUCCESSFUL to 0 Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 08/35] PCI: Tidy Success/Failure checks Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 09/35] nvme-pci: Change PCIBIOS_SUCCESSFUL to 0 Saheed O. Bolarinwa
2020-07-13 16:42   ` Rajashekar, Revanth
2020-07-13 18:24     ` Saheed Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 10/35] nvme-pci: Tidy Success/Failure checks Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 11/35] r8169: Change PCIBIOS_SUCCESSFUL to 0 Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 12/35] r8169: Tidy Success/Failure checks Saheed O. Bolarinwa
2020-07-13 13:45   ` Heiner Kallweit
2020-07-13 13:09     ` Saheed Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 13/35] cxl: Change PCIBIOS_SUCCESSFUL to 0 Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 14/35] i2c/busses: " Saheed O. Bolarinwa
2020-07-17 14:58   ` Jean Delvare
2020-07-18 19:05     ` Saheed Bolarinwa
2020-07-22 11:06       ` Wolfram Sang
2020-07-13 12:22 ` [RFC PATCH 15/35] i2c/busses: Tidy Success/Failure checks Saheed O. Bolarinwa
2020-07-17 15:11   ` Jean Delvare
2020-07-13 12:22 ` [RFC PATCH 16/35] hwmon: (sis5595) Change PCIBIOS_SUCCESSFUL to 0 Saheed O. Bolarinwa
2020-07-14  5:02   ` Guenter Roeck
2020-07-13 12:22 ` [RFC PATCH 17/35] hwmon: (sis5595) Tidy Success/Failure checks Saheed O. Bolarinwa
2020-07-14  5:04   ` Guenter Roeck
2020-07-13 12:22 ` [RFC PATCH 18/35] bcma: Change PCIBIOS_SUCCESSFUL to 0 Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 19/35] atm: " Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 20/35] atm: Tidy Success/Failure checks Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 21/35] atm: Fix Style ERROR- assignment in if condition Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 22/35] unicore32: Change PCIBIOS_SUCCESSFUL to 0 Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 23/35] sparc/PCI: " Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 24/35] sh: " Saheed O. Bolarinwa
2020-07-20 21:41   ` Rich Felker [this message]
2020-07-13 12:22 ` [RFC PATCH 25/35] sh: Tidy Success/Failure checks Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 26/35] powerpc: Change PCIBIOS_SUCCESSFUL to 0 Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 27/35] powerpc: Tidy Success/Failure checks Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 28/35] mips: Change PCIBIOS_SUCCESSFUL to 0 Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 29/35] mips: Tidy Success/Failure checks Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 30/35] microblaze: Change PCIBIOS_SUCCESSFUL to 0 Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 31/35] m68k: " Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 32/35] arm/PCI: " Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 33/35] arm/PCI: Tidy Success/Failure checks Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 34/35] PCI: Change PCIBIOS_SUCCESSFUL to 0 Saheed O. Bolarinwa
2020-07-13 12:22 ` [RFC PATCH 35/35] alpha: Tidy Success/Failure checks Saheed O. Bolarinwa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200720214128.GN14669@brightrain.aerifal.cx \
    --to=dalias@libc.org \
    --cc=bjorn@helgaas.com \
    --cc=helgaas@kernel.org \
    --cc=linux-kernel-mentees@lists.linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    --cc=refactormyself@gmail.com \
    --cc=skhan@linuxfoundation.org \
    --cc=ysato@users.sourceforge.jp \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).