LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Sibi Sankar <sibis@codeaurora.org>
Cc: agross@kernel.org, linux-arm-msm@vger.kernel.org,
	linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
	evgreen@chromium.org, ohad@wizery.com, stable@vger.kernel.org
Subject: Re: [PATCH v3 1/3] remoteproc: qcom_q6v5_mss: Validate MBA firmware size before load
Date: Mon, 27 Jul 2020 22:45:03 -0700
Message-ID: <20200728054503.GA349841@builder.lan> (raw)
In-Reply-To: <20200722201047.12975-2-sibis@codeaurora.org>

On Wed 22 Jul 13:10 PDT 2020, Sibi Sankar wrote:

> The following mem abort is observed when the mba firmware size exceeds
> the allocated mba region. MBA firmware size is restricted to a maximum
> size of 1M and remaining memory region is used by modem debug policy
> firmware when available. Hence verify whether the MBA firmware size lies
> within the allocated memory region and is not greater than 1M before
> loading.
> 
> Err Logs:
> Unable to handle kernel paging request at virtual address
> Mem abort info:
> ...
> Call trace:
>   __memcpy+0x110/0x180
>   rproc_start+0x40/0x218
>   rproc_boot+0x5b4/0x608
>   state_store+0x54/0xf8
>   dev_attr_store+0x44/0x60
>   sysfs_kf_write+0x58/0x80
>   kernfs_fop_write+0x140/0x230
>   vfs_write+0xc4/0x208
>   ksys_write+0x74/0xf8
>   __arm64_sys_write+0x24/0x30
> ...
> 
> Fixes: 051fb70fd4ea4 ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5")
> Cc: stable@vger.kernel.org

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> ---
>  drivers/remoteproc/qcom_q6v5_mss.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
> index 718acebae777f..4e72c9e30426c 100644
> --- a/drivers/remoteproc/qcom_q6v5_mss.c
> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> @@ -412,6 +412,12 @@ static int q6v5_load(struct rproc *rproc, const struct firmware *fw)
>  {
>  	struct q6v5 *qproc = rproc->priv;
>  
> +	/* MBA is restricted to a maximum size of 1M */
> +	if (fw->size > qproc->mba_size || fw->size > SZ_1M) {
> +		dev_err(qproc->dev, "MBA firmware load failed\n");

I'll change this to "MBA firmware exceeds size limit\n". Please let me
know if you object.

Regards,
Bjorn

> +		return -EINVAL;
> +	}
> +
>  	memcpy(qproc->mba_region, fw->data, fw->size);
>  
>  	return 0;
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

  reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-22 20:10 [PATCH v3 0/3] Add modem debug features Sibi Sankar
2020-07-22 20:10 ` [PATCH v3 1/3] remoteproc: qcom_q6v5_mss: Validate MBA firmware size before load Sibi Sankar
2020-07-28  5:45   ` Bjorn Andersson [this message]
2020-07-22 20:10 ` [PATCH v3 2/3] remoteproc: qcom_q6v5_mss: Validate modem blob " Sibi Sankar
2020-07-28  6:04   ` Bjorn Andersson
2020-07-22 20:10 ` [PATCH v3 3/3] remoteproc: qcom_q6v5_mss: Add modem debug policy support Sibi Sankar
2020-07-28  5:48   ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200728054503.GA349841@builder.lan \
    --to=bjorn.andersson@linaro.org \
    --cc=agross@kernel.org \
    --cc=evgreen@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=ohad@wizery.com \
    --cc=sibis@codeaurora.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git