From: Alan Stern <stern@rowland.harvard.edu>
To: Martin Kepplinger <martin.kepplinger@puri.sm>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>,
Bart Van Assche <bvanassche@acm.org>,
Can Guo <cang@codeaurora.org>,
martin.petersen@oracle.com, linux-scsi@vger.kernel.org,
linux-kernel@vger.kernel.org, kernel@puri.sm
Subject: Re: [PATCH] scsi: sd: add runtime pm to open / release
Date: Thu, 30 Jul 2020 11:10:30 -0400 [thread overview]
Message-ID: <20200730151030.GB6332@rowland.harvard.edu> (raw)
In-Reply-To: <d3fe36a9-b785-a5c4-c90d-b8fa10f4272f@puri.sm>
On Thu, Jul 30, 2020 at 10:52:14AM +0200, Martin Kepplinger wrote:
> Maybe I should just start a new discussion with a patch, but the below
> is what makes sense to me (when I understand you correctly) and seems to
> work. I basically add a new flag, so that the old flags behave unchanged
> and only call it during *runtime* resume for SD cards:
>
>
> --- a/drivers/scsi/scsi_error.c
> +++ b/drivers/scsi/scsi_error.c
> @@ -553,15 +553,21 @@ int scsi_check_sense(struct scsi_cmnd *scmd)
> * information that we should pass up to the upper-level
> driver
> * so that we can deal with it there.
> */
> - if (scmd->device->expecting_cc_ua) {
> + if (scmd->device->expecting_cc_ua ||
> + scmd->device->expecting_media_change) {
> /*
> * Because some device does not queue unit
> * attentions correctly, we carefully check
> * additional sense code and qualifier so as
> - * not to squash media change unit attention.
> + * not to squash media change unit attention;
> + * unless expecting_media_change is set, indicating
> + * that the media (most likely) didn't change
> + * but a device only believes so (for example
> + * because of suspend/resume).
> */
> - if (sshdr.asc != 0x28 || sshdr.ascq != 0x00) {
> - scmd->device->expecting_cc_ua = 0;
> + if ((sshdr.asc != 0x28 || sshdr.ascq != 0x00) ||
> + scmd->device->expecting_media_change) {
> + scmd->device->expecting_media_change = 0;
> return NEEDS_RETRY;
> }
> }
> diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
> index d90fefffe31b..b647fab2b663 100644
> --- a/drivers/scsi/sd.c
> +++ b/drivers/scsi/sd.c
> @@ -114,6 +114,7 @@ static void sd_shutdown(struct device *);
> static int sd_suspend_system(struct device *);
> static int sd_suspend_runtime(struct device *);
> static int sd_resume(struct device *);
> +static int sd_resume_runtime(struct device *);
> static void sd_rescan(struct device *);
> static blk_status_t sd_init_command(struct scsi_cmnd *SCpnt);
> static void sd_uninit_command(struct scsi_cmnd *SCpnt);
> @@ -574,7 +575,7 @@ static const struct dev_pm_ops sd_pm_ops = {
> .poweroff = sd_suspend_system,
> .restore = sd_resume,
> .runtime_suspend = sd_suspend_runtime,
> - .runtime_resume = sd_resume,
> + .runtime_resume = sd_resume_runtime,
> };
>
> static struct scsi_driver sd_template = {
> @@ -3652,6 +3653,21 @@ static int sd_resume(struct device *dev)
> return ret;
> }
>
> +static int sd_resume_runtime(struct device *dev)
> +{
> + struct scsi_disk *sdkp = dev_get_drvdata(dev);
> +
> + /* Some SD cardreaders report media change when resuming from
> suspend
> + * because they can't keep track during suspend. */
> +
> + /* XXX This is not unproblematic though: We won't notice when a card
> + * was really changed during runtime suspend! We basically rely
> on users
> + * to unmount or suspend before doing so. */
> + sdkp->device->expecting_media_change = 1;
> +
> + return sd_resume(dev);
> +}
> +
> /**
> * init_sd - entry point for this driver (both when built in or when
> * a module).
> diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
> index bc5909033d13..8c8f053f71c8 100644
> --- a/include/scsi/scsi_device.h
> +++ b/include/scsi/scsi_device.h
> @@ -169,6 +169,8 @@ struct scsi_device {
> * this device */
> unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
> * because we did a bus reset. */
> + unsigned expecting_media_change:1; /* Expecting media change
> ASC/ASCQ
> + when it actually doesn't
> change */
> unsigned use_10_for_rw:1; /* first try 10-byte read / write */
> unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
> unsigned set_dbd_for_ms:1; /* Set "DBD" field in mode sense */
That's pretty much what James was suggesting, except for one thing: You
must not set sdkp->device->expecting_media_change to 1 for all devices
in sd_runtime_resume(). Only for devices which may generate a spurious
Unit Attention following runtime resume -- and maybe not even for all of
them, depending on what the user wants.
Alan Stern
next prev parent reply other threads:[~2020-07-30 15:10 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-23 11:10 [PATCH] scsi: sd: add runtime pm to open / release Martin Kepplinger
2020-06-24 13:33 ` Bart Van Assche
2020-06-25 8:16 ` Martin Kepplinger
2020-06-25 14:52 ` Alan Stern
2020-06-26 3:53 ` Bart Van Assche
2020-06-26 15:07 ` Bart Van Assche
2020-06-26 15:44 ` Alan Stern
2020-06-28 2:37 ` Bart Van Assche
2020-06-28 13:10 ` Alan Stern
2020-06-29 9:42 ` Martin Kepplinger
2020-06-29 16:15 ` Alan Stern
2020-06-29 16:56 ` Bart Van Assche
2020-06-29 17:40 ` Alan Stern
2020-06-30 3:33 ` Martin Kepplinger
2020-06-30 13:38 ` Alan Stern
2020-06-30 15:59 ` Bart Van Assche
2020-06-30 18:02 ` Alan Stern
2020-06-30 19:23 ` Bart Van Assche
2020-06-30 19:38 ` Alan Stern
2020-06-30 23:31 ` Bart Van Assche
2020-07-01 0:49 ` Alan Stern
2020-07-06 16:41 ` Alan Stern
2020-07-28 7:02 ` Martin Kepplinger
2020-07-28 20:02 ` Alan Stern
2020-07-29 14:12 ` Martin Kepplinger
2020-07-29 14:32 ` Alan Stern
2020-07-29 14:44 ` Martin K. Petersen
2020-07-29 14:56 ` Alan Stern
2020-07-29 14:46 ` James Bottomley
2020-07-29 14:53 ` James Bottomley
2020-07-29 15:40 ` Martin Kepplinger
2020-07-29 15:44 ` James Bottomley
2020-07-29 16:43 ` Martin Kepplinger
2020-07-29 18:25 ` Alan Stern
2020-07-29 18:29 ` James Bottomley
2020-07-30 8:52 ` Martin Kepplinger
2020-07-30 8:54 ` Martin Kepplinger
2020-07-30 15:10 ` Alan Stern [this message]
2020-08-04 9:39 ` Martin Kepplinger
2020-08-07 9:51 ` Martin Kepplinger
2020-08-07 14:30 ` Alan Stern
2020-08-08 6:59 ` Martin Kepplinger
2020-08-08 15:05 ` Alan Stern
2020-08-09 9:20 ` Martin Kepplinger
2020-08-09 15:26 ` Alan Stern
2020-08-10 12:03 ` Martin Kepplinger
2020-08-10 14:13 ` Alan Stern
2020-08-11 7:55 ` Martin Kepplinger
2020-08-11 13:48 ` Alan Stern
2020-07-29 15:40 ` Alan Stern
2020-07-29 15:49 ` James Bottomley
2020-07-29 16:17 ` Alan Stern
2020-07-29 15:52 ` Martin Kepplinger
2020-07-29 18:10 ` Douglas Gilbert
2020-07-30 8:05 ` Martin Kepplinger
2020-07-30 15:14 ` Alan Stern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200730151030.GB6332@rowland.harvard.edu \
--to=stern@rowland.harvard.edu \
--cc=James.Bottomley@hansenpartnership.com \
--cc=bvanassche@acm.org \
--cc=cang@codeaurora.org \
--cc=kernel@puri.sm \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.kepplinger@puri.sm \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).