linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@kernel.org>
Cc: Daniel Jeong <gshark.jeong@gmail.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	linux-kernel@vger.kernel.org, Axel Lin <axel.lin@ingics.com>
Subject: [PATCH] regulator: lp8755: Get rid of lp8755_read/lp8755_write/lp8755_update_bits
Date: Sun,  2 Aug 2020 17:06:38 +0800	[thread overview]
Message-ID: <20200802090638.380589-1-axel.lin@ingics.com> (raw)

Just use regmap_read/regmap_write/regmap_update_bits instead.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
 drivers/regulator/lp8755.c | 82 ++++++++++----------------------------
 1 file changed, 21 insertions(+), 61 deletions(-)

diff --git a/drivers/regulator/lp8755.c b/drivers/regulator/lp8755.c
index 4291df077c39..8cc9963023f2 100644
--- a/drivers/regulator/lp8755.c
+++ b/drivers/regulator/lp8755.c
@@ -49,53 +49,15 @@ struct lp8755_chip {
 	struct regulator_dev *rdev[LP8755_BUCK_MAX];
 };
 
-/**
- *lp8755_read : read a single register value from lp8755.
- *@pchip : device to read from
- *@reg   : register to read from
- *@val   : pointer to store read value
- */
-static int lp8755_read(struct lp8755_chip *pchip, unsigned int reg,
-		       unsigned int *val)
-{
-	return regmap_read(pchip->regmap, reg, val);
-}
-
-/**
- *lp8755_write : write a single register value to lp8755.
- *@pchip : device to write to
- *@reg   : register to write to
- *@val   : value to be written
- */
-static int lp8755_write(struct lp8755_chip *pchip, unsigned int reg,
-			unsigned int val)
-{
-	return regmap_write(pchip->regmap, reg, val);
-}
-
-/**
- *lp8755_update_bits : set the values of bit fields in lp8755 register.
- *@pchip : device to read from
- *@reg   : register to update
- *@mask  : bitmask to be changed
- *@val   : value for bitmask
- */
-static int lp8755_update_bits(struct lp8755_chip *pchip, unsigned int reg,
-			      unsigned int mask, unsigned int val)
-{
-	return regmap_update_bits(pchip->regmap, reg, mask, val);
-}
-
 static int lp8755_buck_enable_time(struct regulator_dev *rdev)
 {
 	int ret;
 	unsigned int regval;
 	enum lp8755_bucks id = rdev_get_id(rdev);
-	struct lp8755_chip *pchip = rdev_get_drvdata(rdev);
 
-	ret = lp8755_read(pchip, 0x12 + id, &regval);
+	ret = regmap_read(rdev->regmap, 0x12 + id, &regval);
 	if (ret < 0) {
-		dev_err(pchip->dev, "i2c access error %s\n", __func__);
+		dev_err(&rdev->dev, "i2c access error %s\n", __func__);
 		return ret;
 	}
 	return (regval & 0xff) * 100;
@@ -115,17 +77,17 @@ static int lp8755_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
 		break;
 	case REGULATOR_MODE_NORMAL:
 		/* enable automatic pwm/pfm mode */
-		ret = lp8755_update_bits(pchip, 0x08 + id, 0x20, 0x00);
+		ret = regmap_update_bits(rdev->regmap, 0x08 + id, 0x20, 0x00);
 		if (ret < 0)
 			goto err_i2c;
 		break;
 	case REGULATOR_MODE_IDLE:
 		/* enable automatic pwm/pfm/lppfm mode */
-		ret = lp8755_update_bits(pchip, 0x08 + id, 0x20, 0x20);
+		ret = regmap_update_bits(rdev->regmap, 0x08 + id, 0x20, 0x20);
 		if (ret < 0)
 			goto err_i2c;
 
-		ret = lp8755_update_bits(pchip, 0x10, 0x01, 0x01);
+		ret = regmap_update_bits(rdev->regmap, 0x10, 0x01, 0x01);
 		if (ret < 0)
 			goto err_i2c;
 		break;
@@ -135,12 +97,12 @@ static int lp8755_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
 		regbval = (0x01 << id);
 	}
 
-	ret = lp8755_update_bits(pchip, 0x06, 0x01 << id, regbval);
+	ret = regmap_update_bits(rdev->regmap, 0x06, 0x01 << id, regbval);
 	if (ret < 0)
 		goto err_i2c;
 	return ret;
 err_i2c:
-	dev_err(pchip->dev, "i2c access error %s\n", __func__);
+	dev_err(&rdev->dev, "i2c access error %s\n", __func__);
 	return ret;
 }
 
@@ -149,9 +111,8 @@ static unsigned int lp8755_buck_get_mode(struct regulator_dev *rdev)
 	int ret;
 	unsigned int regval;
 	enum lp8755_bucks id = rdev_get_id(rdev);
-	struct lp8755_chip *pchip = rdev_get_drvdata(rdev);
 
-	ret = lp8755_read(pchip, 0x06, &regval);
+	ret = regmap_read(rdev->regmap, 0x06, &regval);
 	if (ret < 0)
 		goto err_i2c;
 
@@ -159,7 +120,7 @@ static unsigned int lp8755_buck_get_mode(struct regulator_dev *rdev)
 	if (regval & (0x01 << id))
 		return REGULATOR_MODE_FAST;
 
-	ret = lp8755_read(pchip, 0x08 + id, &regval);
+	ret = regmap_read(rdev->regmap, 0x08 + id, &regval);
 	if (ret < 0)
 		goto err_i2c;
 
@@ -171,7 +132,7 @@ static unsigned int lp8755_buck_get_mode(struct regulator_dev *rdev)
 	return REGULATOR_MODE_NORMAL;
 
 err_i2c:
-	dev_err(pchip->dev, "i2c access error %s\n", __func__);
+	dev_err(&rdev->dev, "i2c access error %s\n", __func__);
 	return 0;
 }
 
@@ -180,7 +141,6 @@ static int lp8755_buck_set_ramp(struct regulator_dev *rdev, int ramp)
 	int ret;
 	unsigned int regval = 0x00;
 	enum lp8755_bucks id = rdev_get_id(rdev);
-	struct lp8755_chip *pchip = rdev_get_drvdata(rdev);
 
 	/* uV/us */
 	switch (ramp) {
@@ -209,17 +169,17 @@ static int lp8755_buck_set_ramp(struct regulator_dev *rdev, int ramp)
 		regval = 0x00;
 		break;
 	default:
-		dev_err(pchip->dev,
+		dev_err(&rdev->dev,
 			"Not supported ramp value %d %s\n", ramp, __func__);
 		return -EINVAL;
 	}
 
-	ret = lp8755_update_bits(pchip, 0x07 + id, 0x07, regval);
+	ret = regmap_update_bits(rdev->regmap, 0x07 + id, 0x07, regval);
 	if (ret < 0)
 		goto err_i2c;
 	return ret;
 err_i2c:
-	dev_err(pchip->dev, "i2c access error %s\n", __func__);
+	dev_err(&rdev->dev, "i2c access error %s\n", __func__);
 	return ret;
 }
 
@@ -278,7 +238,7 @@ static int lp8755_init_data(struct lp8755_chip *pchip)
 	struct lp8755_platform_data *pdata = pchip->pdata;
 
 	/* read back  muti-phase configuration */
-	ret = lp8755_read(pchip, 0x3D, &regval);
+	ret = regmap_read(pchip->regmap, 0x3D, &regval);
 	if (ret < 0)
 		goto out_i2c_error;
 	pchip->mphase = regval & 0x0F;
@@ -356,11 +316,11 @@ static irqreturn_t lp8755_irq_handler(int irq, void *data)
 	struct lp8755_chip *pchip = data;
 
 	/* read flag0 register */
-	ret = lp8755_read(pchip, 0x0D, &flag0);
+	ret = regmap_read(pchip->regmap, 0x0D, &flag0);
 	if (ret < 0)
 		goto err_i2c;
 	/* clear flag register to pull up int. pin */
-	ret = lp8755_write(pchip, 0x0D, 0x00);
+	ret = regmap_write(pchip->regmap, 0x0D, 0x00);
 	if (ret < 0)
 		goto err_i2c;
 
@@ -377,11 +337,11 @@ static irqreturn_t lp8755_irq_handler(int irq, void *data)
 		}
 
 	/* read flag1 register */
-	ret = lp8755_read(pchip, 0x0E, &flag1);
+	ret = regmap_read(pchip->regmap, 0x0E, &flag1);
 	if (ret < 0)
 		goto err_i2c;
 	/* clear flag register to pull up int. pin */
-	ret = lp8755_write(pchip, 0x0E, 0x00);
+	ret = regmap_write(pchip->regmap, 0x0E, 0x00);
 	if (ret < 0)
 		goto err_i2c;
 
@@ -423,7 +383,7 @@ static int lp8755_int_config(struct lp8755_chip *pchip)
 		return 0;
 	}
 
-	ret = lp8755_read(pchip, 0x0F, &regval);
+	ret = regmap_read(pchip->regmap, 0x0F, &regval);
 	if (ret < 0) {
 		dev_err(pchip->dev, "i2c access error %s\n", __func__);
 		return ret;
@@ -502,7 +462,7 @@ static int lp8755_probe(struct i2c_client *client,
 err:
 	/* output disable */
 	for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
-		lp8755_write(pchip, icnt, 0x00);
+		regmap_write(pchip->regmap, icnt, 0x00);
 
 	return ret;
 }
@@ -513,7 +473,7 @@ static int lp8755_remove(struct i2c_client *client)
 	struct lp8755_chip *pchip = i2c_get_clientdata(client);
 
 	for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
-		lp8755_write(pchip, icnt, 0x00);
+		regmap_write(pchip->regmap, icnt, 0x00);
 
 	return 0;
 }
-- 
2.25.1


             reply	other threads:[~2020-08-02  9:07 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-02  9:06 Axel Lin [this message]
2020-08-18 16:56 ` [PATCH] regulator: lp8755: Get rid of lp8755_read/lp8755_write/lp8755_update_bits Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200802090638.380589-1-axel.lin@ingics.com \
    --to=axel.lin@ingics.com \
    --cc=broonie@kernel.org \
    --cc=gshark.jeong@gmail.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).