From: Stephen Boyd <swboyd@chromium.org>
To: Mark Brown <broonie@kernel.org>, Oder Chiou <oder_chiou@realtek.com>
Cc: linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org,
Takashi Iwai <tiwai@suse.com>, Jaroslav Kysela <perex@perex.cz>,
Cheng-Yi Chiang <cychiang@chromium.org>,
Shuming Fan <shumingf@realtek.com>
Subject: [PATCH 2/3] ASoC: rt5682: Drop usage of __clk_get_name()
Date: Mon, 3 Aug 2020 17:05:30 -0700 [thread overview]
Message-ID: <20200804000531.920688-3-swboyd@chromium.org> (raw)
In-Reply-To: <20200804000531.920688-1-swboyd@chromium.org>
The __clk_get_name() API is deprecated. Use clk_hw_get_name() or
proper registration techniques to avoid it.
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Shuming Fan <shumingf@realtek.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---
sound/soc/codecs/rt5682.c | 24 +++++++++++-------------
1 file changed, 11 insertions(+), 13 deletions(-)
diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c
index ed9475f24aec..d8a1973a4624 100644
--- a/sound/soc/codecs/rt5682.c
+++ b/sound/soc/codecs/rt5682.c
@@ -2548,7 +2548,7 @@ static unsigned long rt5682_wclk_recalc_rate(struct clk_hw *hw,
container_of(hw, struct rt5682_priv,
dai_clks_hw[RT5682_DAI_WCLK_IDX]);
struct snd_soc_component *component = rt5682->component;
- const char * const clk_name = __clk_get_name(hw->clk);
+ const char * const clk_name = clk_hw_get_name(hw);
if (!rt5682_clk_check(rt5682))
return 0;
@@ -2572,7 +2572,7 @@ static long rt5682_wclk_round_rate(struct clk_hw *hw, unsigned long rate,
container_of(hw, struct rt5682_priv,
dai_clks_hw[RT5682_DAI_WCLK_IDX]);
struct snd_soc_component *component = rt5682->component;
- const char * const clk_name = __clk_get_name(hw->clk);
+ const char * const clk_name = clk_hw_get_name(hw);
if (!rt5682_clk_check(rt5682))
return -EINVAL;
@@ -2597,7 +2597,7 @@ static int rt5682_wclk_set_rate(struct clk_hw *hw, unsigned long rate,
dai_clks_hw[RT5682_DAI_WCLK_IDX]);
struct snd_soc_component *component = rt5682->component;
struct clk *parent_clk;
- const char * const clk_name = __clk_get_name(hw->clk);
+ const char * const clk_name = clk_hw_get_name(hw);
int pre_div;
unsigned int clk_pll2_out;
@@ -2755,33 +2755,31 @@ static int rt5682_register_dai_clks(struct snd_soc_component *component)
struct device *dev = component->dev;
struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
struct rt5682_platform_data *pdata = &rt5682->pdata;
- struct clk_init_data init;
struct clk *dai_clk;
struct clk_lookup *dai_clk_lookup;
struct clk_hw *dai_clk_hw;
- const char *parent_name;
int i, ret;
for (i = 0; i < RT5682_DAI_NUM_CLKS; ++i) {
+ struct clk_init_data init = { };
+
dai_clk_hw = &rt5682->dai_clks_hw[i];
switch (i) {
case RT5682_DAI_WCLK_IDX:
/* Make MCLK the parent of WCLK */
if (rt5682->mclk) {
- parent_name = __clk_get_name(rt5682->mclk);
- init.parent_names = &parent_name;
+ init.parent_data = &(struct clk_parent_data){
+ .fw_name = "mclk",
+ };
init.num_parents = 1;
- } else {
- init.parent_names = NULL;
- init.num_parents = 0;
}
break;
case RT5682_DAI_BCLK_IDX:
/* Make WCLK the parent of BCLK */
- parent_name = __clk_get_name(
- rt5682->dai_clks[RT5682_DAI_WCLK_IDX]);
- init.parent_names = &parent_name;
+ init.parent_hws = &(const struct clk_hw *){
+ &rt5682->dai_clks_hw[RT5682_DAI_WCLK_IDX]
+ };
init.num_parents = 1;
break;
default:
--
Sent by a computer, using git, on the internet
next prev parent reply other threads:[~2020-08-04 0:05 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-04 0:05 [PATCH 0/3] ASoC: rt5682: Use clk APIs better Stephen Boyd
2020-08-04 0:05 ` [PATCH 1/3] ASoC: rt5682: Use dev_dbg() in rt5682_clk_check() Stephen Boyd
2020-08-04 0:05 ` Stephen Boyd [this message]
2020-08-04 0:05 ` [PATCH 3/3] ASoC: rt5682: Use clk_hw based APIs for registration Stephen Boyd
2020-08-18 16:56 ` [PATCH 0/3] ASoC: rt5682: Use clk APIs better Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200804000531.920688-3-swboyd@chromium.org \
--to=swboyd@chromium.org \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=cychiang@chromium.org \
--cc=linux-kernel@vger.kernel.org \
--cc=oder_chiou@realtek.com \
--cc=perex@perex.cz \
--cc=shumingf@realtek.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).