LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>,
	Sasha Levin <sashal@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org
Subject: [PATCH AUTOSEL 5.7 09/58] arm64: dts: rockchip: fix rk3399-puma vcc5v0-host gpio
Date: Sat,  8 Aug 2020 19:36:35 -0400
Message-ID: <20200808233724.3618168-9-sashal@kernel.org> (raw)
In-Reply-To: <20200808233724.3618168-1-sashal@kernel.org>

From: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>

[ Upstream commit 7a7184f6cfa9279f1a1c10a1845d247d7fad54ff ]

The puma vcc5v0_host regulator node currently uses opposite active-values
for the enable pin. The gpio-declaration uses active-high while the
separate enable-active-low property marks the pin as active low.

While on the kernel side this works ok, other DT users may get
confused - as seen with uboot right now.

So bring this in line and make both properties match, similar to the
gmac fix.

Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20200604091239.424318-1-heiko@sntech.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index 07694b196fdbe..063f59a420b65 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -101,7 +101,7 @@ vcc3v3_sys: vcc3v3-sys {
 
 	vcc5v0_host: vcc5v0-host-regulator {
 		compatible = "regulator-fixed";
-		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
 		enable-active-low;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc5v0_host_en>;
-- 
2.25.1


  parent reply index

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-08 23:36 [PATCH AUTOSEL 5.7 01/58] ARM: dts: stm32: fix uart7_pins_a comments in stm32mp15-pinctrl Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 02/58] x86/mce/inject: Fix a wrong assignment of i_mce.status Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 03/58] perf/x86/intel/uncore: Fix oops when counting IMC uncore events on some TGL Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 04/58] x86, sched: Bail out of frequency invariance if turbo frequency is unknown Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 05/58] x86, sched: Bail out of frequency invariance if turbo_freq/base_freq gives 0 Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 06/58] sched/fair: Fix NOHZ next idle balance Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 07/58] sched: correct SD_flags returned by tl->sd_flags() Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 08/58] arm64: dts: rockchip: fix rk3368-lion gmac reset gpio Sasha Levin
2020-08-08 23:36 ` Sasha Levin [this message]
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 10/58] arm64: dts: rockchip: fix rk3399-puma " Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 11/58] EDAC: Fix reference count leaks Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 12/58] crc-t10dif: Fix potential crypto notify dead-lock Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 13/58] arm64: dts: qcom: msm8916: Replace invalid bias-pull-none property Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 14/58] memory: tegra: Fix an error handling path in tegra186_emc_probe() Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 15/58] blktrace: fix debugfs use after free Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 16/58] crypto: ccree - fix resource leak on error path Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 17/58] ARM: exynos: MCPM: Restore big.LITTLE cpuidle support Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 18/58] rcu/tree: Repeat the monitor if any free channel is busy Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 19/58] firmware: arm_scmi: Fix SCMI genpd domain probing Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 20/58] arm64: dts: sun50i-pinephone: dldo4 must not be >= 1.8V Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 21/58] arm64: dts: exynos: Fix silent hang after boot on Espresso Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 22/58] sched/uclamp: Fix initialization of struct uclamp_rq Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 23/58] crypto: qat - allow xts requests not multiple of block Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 24/58] clk: scmi: Fix min and max rate when registering clocks with discrete rates Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 25/58] m68k: mac: Don't send IOP message until channel is idle Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 26/58] m68k: mac: Fix IOP status/control register writes Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 27/58] platform/x86: intel-hid: Fix return value check in check_acpi_dev() Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 28/58] platform/x86: intel-vbtn: " Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 29/58] ARM: dts: gose: Fix ports node name for adv7180 Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 30/58] arm64: dts: renesas: Fix SD Card/eMMC interface device node names Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 31/58] ARM: dts: gose: Fix ports node name for adv7612 Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 32/58] ARM: at91: pm: add missing put_device() call in at91_pm_sram_init() Sasha Levin
2020-08-08 23:36 ` [PATCH AUTOSEL 5.7 33/58] ARM: dts: exynos: Disable frequency scaling for FSYS bus on Odroid XU3 family Sasha Levin
2020-08-08 23:37 ` [PATCH AUTOSEL 5.7 34/58] reset: intel: fix a compile warning about REG_OFFSET redefined Sasha Levin
2020-08-08 23:37 ` [PATCH AUTOSEL 5.7 35/58] ARM: dts: sunxi: bananapi-m2-plus-v1.2: Add regulator supply to all CPU cores Sasha Levin
2020-08-08 23:37 ` [PATCH AUTOSEL 5.7 36/58] ARM: dts: sunxi: bananapi-m2-plus-v1.2: Fix CPU supply voltages Sasha Levin
2020-08-08 23:37 ` [PATCH AUTOSEL 5.7 37/58] spi: lantiq: fix: Rx overflow error in full duplex mode Sasha Levin
2020-08-08 23:37 ` [PATCH AUTOSEL 5.7 38/58] tpm: Require that all digests are present in TCG_PCR_EVENT2 structures Sasha Levin
2020-08-08 23:37 ` [PATCH AUTOSEL 5.7 39/58] recordmcount: only record relocation of type R_AARCH64_CALL26 on arm64 Sasha Levin
2020-08-08 23:37 ` [PATCH AUTOSEL 5.7 40/58] regulator: fix memory leak on error path of regulator_register() Sasha Levin
2020-08-08 23:37 ` [PATCH AUTOSEL 5.7 41/58] io_uring: fix sq array offset calculation Sasha Levin
2020-08-08 23:37 ` [PATCH AUTOSEL 5.7 42/58] arm64: dts: meson: fix mmc0 tuning error on Khadas VIM3 Sasha Levin
2020-08-08 23:37 ` [PATCH AUTOSEL 5.7 43/58] soc: qcom: pdr: Reorder the PD state indication ack Sasha Levin
2020-08-08 23:37 ` [PATCH AUTOSEL 5.7 44/58] spi: rockchip: Fix error in SPI slave pio read Sasha Levin
2020-08-08 23:37 ` [PATCH AUTOSEL 5.7 45/58] ARM: socfpga: PM: add missing put_device() call in socfpga_setup_ocram_self_refresh() Sasha Levin
2020-08-08 23:37 ` [PATCH AUTOSEL 5.7 46/58] iocost: Fix check condition of iocg abs_vdebt Sasha Levin
2020-08-08 23:37 ` [PATCH AUTOSEL 5.7 47/58] scripts/selinux/mdp: fix initial SID handling Sasha Levin
2020-08-08 23:37 ` [PATCH AUTOSEL 5.7 48/58] irqchip/ti-sci-inta: Fix return value about devm_ioremap_resource() Sasha Levin
2020-08-08 23:37 ` [PATCH AUTOSEL 5.7 49/58] seccomp: Fix ioctl number for SECCOMP_IOCTL_NOTIF_ID_VALID Sasha Levin
2020-08-08 23:37 ` [PATCH AUTOSEL 5.7 50/58] md: raid0/linear: fix dereference before null check on pointer mddev Sasha Levin
2020-08-08 23:37 ` [PATCH AUTOSEL 5.7 51/58] irqchip/loongson-liointc: Fix potential dead lock Sasha Levin
2020-08-08 23:37 ` [PATCH AUTOSEL 5.7 52/58] irqchip/irq-bcm7038-l1: Guard uses of cpu_logical_map Sasha Levin
2020-08-08 23:37 ` [PATCH AUTOSEL 5.7 53/58] irqchip/gic-v4.1: Use GFP_ATOMIC flag in allocate_vpe_l1_table() Sasha Levin
2020-08-08 23:37 ` [PATCH AUTOSEL 5.7 54/58] nvme-tcp: fix controller reset hang during traffic Sasha Levin
2020-08-08 23:37 ` [PATCH AUTOSEL 5.7 55/58] nvme-rdma: " Sasha Levin
2020-08-08 23:37 ` [PATCH AUTOSEL 5.7 56/58] nvme-multipath: fix logic for non-optimized paths Sasha Levin
2020-08-08 23:37 ` [PATCH AUTOSEL 5.7 57/58] nvme-multipath: do not fall back to __nvme_find_path() " Sasha Levin
2020-08-08 23:37 ` [PATCH AUTOSEL 5.7 58/58] block: don't do revalidate zones on invalid devices Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200808233724.3618168-9-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko.stuebner@theobroma-systems.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git