From: Frank Wunderlich <linux@fw-web.de>
To: linux-mediatek@lists.infradead.org
Cc: Frank Wunderlich <frank-w@public-files.de>,
Chun-Kuang Hu <chunkuang.hu@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
David Airlie <airlied@linux.ie>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
Daniel Vetter <daniel@ffwll.ch>,
Matthias Brugger <matthias.bgg@gmail.com>,
linux-arm-kernel@lists.infradead.org,
David Woodhouse <dwmw@amazon.co.uk>
Subject: [PATCH v5 6/7] arm: dts: mt7623: move display nodes to separate mt7623n.dtsi
Date: Wed, 19 Aug 2020 10:17:51 +0200 [thread overview]
Message-ID: <20200819081752.4805-7-linux@fw-web.de> (raw)
In-Reply-To: <20200819081752.4805-1-linux@fw-web.de>
From: Frank Wunderlich <frank-w@public-files.de>
mt7623a has no graphics support so move nodes from generic mt7623.dtsi
to mt7623n.dtsi
Fixes: 1f6ed224594 ("arm: dts: mt7623: add Mali-450 device node")
Suggested-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
arch/arm/boot/dts/mt7623.dtsi | 123 ----------------
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 2 +-
arch/arm/boot/dts/mt7623n-rfb-emmc.dts | 2 +-
arch/arm/boot/dts/mt7623n.dtsi | 134 ++++++++++++++++++
4 files changed, 136 insertions(+), 125 deletions(-)
create mode 100644 arch/arm/boot/dts/mt7623n.dtsi
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index a106c0d90a52..d09b5671c91b 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -14,7 +14,6 @@
#include <dt-bindings/power/mt2701-power.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/phy/phy.h>
-#include <dt-bindings/memory/mt2701-larb-port.h>
#include <dt-bindings/reset/mt2701-resets.h>
#include <dt-bindings/thermal/thermal.h>
@@ -297,17 +296,6 @@ timer: timer@10008000 {
clock-names = "system-clk", "rtc-clk";
};
- smi_common: smi@1000c000 {
- compatible = "mediatek,mt7623-smi-common",
- "mediatek,mt2701-smi-common";
- reg = <0 0x1000c000 0 0x1000>;
- clocks = <&infracfg CLK_INFRA_SMI>,
- <&mmsys CLK_MM_SMI_COMMON>,
- <&infracfg CLK_INFRA_SMI>;
- clock-names = "apb", "smi", "async";
- power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
- };
-
pwrap: pwrap@1000d000 {
compatible = "mediatek,mt7623-pwrap",
"mediatek,mt2701-pwrap";
@@ -339,17 +327,6 @@ sysirq: interrupt-controller@10200100 {
reg = <0 0x10200100 0 0x1c>;
};
- iommu: mmsys_iommu@10205000 {
- compatible = "mediatek,mt7623-m4u",
- "mediatek,mt2701-m4u";
- reg = <0 0x10205000 0 0x1000>;
- interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&infracfg CLK_INFRA_M4U>;
- clock-names = "bclk";
- mediatek,larbs = <&larb0 &larb1 &larb2>;
- #iommu-cells = <1>;
- };
-
efuse: efuse@10206000 {
compatible = "mediatek,mt7623-efuse",
"mediatek,mt8173-efuse";
@@ -725,94 +702,6 @@ mmc0: mmc@11230000 {
status = "disabled";
};
- g3dsys: syscon@13000000 {
- compatible = "mediatek,mt7623-g3dsys",
- "mediatek,mt2701-g3dsys",
- "syscon";
- reg = <0 0x13000000 0 0x200>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- mali: gpu@13040000 {
- compatible = "mediatek,mt7623-mali", "arm,mali-450";
- reg = <0 0x13040000 0 0x30000>;
- interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 171 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 172 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 173 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 174 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 177 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 178 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 179 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
- interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1",
- "ppmmu1", "pp2", "ppmmu2", "pp3", "ppmmu3",
- "pp";
- clocks = <&topckgen CLK_TOP_MMPLL>,
- <&g3dsys CLK_G3DSYS_CORE>;
- clock-names = "bus", "core";
- power-domains = <&scpsys MT2701_POWER_DOMAIN_MFG>;
- resets = <&g3dsys MT2701_G3DSYS_CORE_RST>;
- };
-
- mmsys: syscon@14000000 {
- compatible = "mediatek,mt7623-mmsys",
- "mediatek,mt2701-mmsys",
- "syscon";
- reg = <0 0x14000000 0 0x1000>;
- #clock-cells = <1>;
- };
-
- larb0: larb@14010000 {
- compatible = "mediatek,mt7623-smi-larb",
- "mediatek,mt2701-smi-larb";
- reg = <0 0x14010000 0 0x1000>;
- mediatek,smi = <&smi_common>;
- mediatek,larb-id = <0>;
- clocks = <&mmsys CLK_MM_SMI_LARB0>,
- <&mmsys CLK_MM_SMI_LARB0>;
- clock-names = "apb", "smi";
- power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
- };
-
- imgsys: syscon@15000000 {
- compatible = "mediatek,mt7623-imgsys",
- "mediatek,mt2701-imgsys",
- "syscon";
- reg = <0 0x15000000 0 0x1000>;
- #clock-cells = <1>;
- };
-
- larb2: larb@15001000 {
- compatible = "mediatek,mt7623-smi-larb",
- "mediatek,mt2701-smi-larb";
- reg = <0 0x15001000 0 0x1000>;
- mediatek,smi = <&smi_common>;
- mediatek,larb-id = <2>;
- clocks = <&imgsys CLK_IMG_SMI_COMM>,
- <&imgsys CLK_IMG_SMI_COMM>;
- clock-names = "apb", "smi";
- power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
- };
-
- jpegdec: jpegdec@15004000 {
- compatible = "mediatek,mt7623-jpgdec",
- "mediatek,mt2701-jpgdec";
- reg = <0 0x15004000 0 0x1000>;
- interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
- <&imgsys CLK_IMG_JPGDEC>;
- clock-names = "jpgdec-smi",
- "jpgdec";
- power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
- mediatek,larb = <&larb2>;
- iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
- <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
- };
-
vdecsys: syscon@16000000 {
compatible = "mediatek,mt7623-vdecsys",
"mediatek,mt2701-vdecsys",
@@ -821,18 +710,6 @@ vdecsys: syscon@16000000 {
#clock-cells = <1>;
};
- larb1: larb@16010000 {
- compatible = "mediatek,mt7623-smi-larb",
- "mediatek,mt2701-smi-larb";
- reg = <0 0x16010000 0 0x1000>;
- mediatek,smi = <&smi_common>;
- mediatek,larb-id = <1>;
- clocks = <&vdecsys CLK_VDEC_CKGEN>,
- <&vdecsys CLK_VDEC_LARB>;
- clock-names = "apb", "smi";
- power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
- };
-
hifsys: syscon@1a000000 {
compatible = "mediatek,mt7623-hifsys",
"mediatek,mt2701-hifsys",
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 2b760f90f38c..344f8c65c4aa 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -6,7 +6,7 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
-#include "mt7623.dtsi"
+#include "mt7623n.dtsi"
#include "mt6323.dtsi"
/ {
diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
index 0447748f9fa0..f8efcc364bc3 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
@@ -7,7 +7,7 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
-#include "mt7623.dtsi"
+#include "mt7623n.dtsi"
#include "mt6323.dtsi"
/ {
diff --git a/arch/arm/boot/dts/mt7623n.dtsi b/arch/arm/boot/dts/mt7623n.dtsi
new file mode 100644
index 000000000000..a47e82468895
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623n.dtsi
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright © 2017-2020 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ * Ryder Lee <ryder.lee@mediatek.com>
+ *
+ */
+
+#include "mt7623.dtsi"
+#include <dt-bindings/memory/mt2701-larb-port.h>
+
+/ {
+ g3dsys: syscon@13000000 {
+ compatible = "mediatek,mt7623-g3dsys",
+ "mediatek,mt2701-g3dsys",
+ "syscon";
+ reg = <0 0x13000000 0 0x200>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ mali: gpu@13040000 {
+ compatible = "mediatek,mt7623-mali", "arm,mali-450";
+ reg = <0 0x13040000 0 0x30000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 171 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 172 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 173 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 174 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 177 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 178 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 179 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1",
+ "ppmmu1", "pp2", "ppmmu2", "pp3", "ppmmu3",
+ "pp";
+ clocks = <&topckgen CLK_TOP_MMPLL>,
+ <&g3dsys CLK_G3DSYS_CORE>;
+ clock-names = "bus", "core";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_MFG>;
+ resets = <&g3dsys MT2701_G3DSYS_CORE_RST>;
+ };
+
+ mmsys: syscon@14000000 {
+ compatible = "mediatek,mt7623-mmsys",
+ "mediatek,mt2701-mmsys",
+ "syscon";
+ reg = <0 0x14000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ larb0: larb@14010000 {
+ compatible = "mediatek,mt7623-smi-larb",
+ "mediatek,mt2701-smi-larb";
+ reg = <0 0x14010000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <0>;
+ clocks = <&mmsys CLK_MM_SMI_LARB0>,
+ <&mmsys CLK_MM_SMI_LARB0>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+ };
+
+ larb1: larb@16010000 {
+ compatible = "mediatek,mt7623-smi-larb",
+ "mediatek,mt2701-smi-larb";
+ reg = <0 0x16010000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <1>;
+ clocks = <&vdecsys CLK_VDEC_CKGEN>,
+ <&vdecsys CLK_VDEC_LARB>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
+ };
+
+ larb2: larb@15001000 {
+ compatible = "mediatek,mt7623-smi-larb",
+ "mediatek,mt2701-smi-larb";
+ reg = <0 0x15001000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <2>;
+ clocks = <&imgsys CLK_IMG_SMI_COMM>,
+ <&imgsys CLK_IMG_SMI_COMM>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+ };
+
+ imgsys: syscon@15000000 {
+ compatible = "mediatek,mt7623-imgsys",
+ "mediatek,mt2701-imgsys",
+ "syscon";
+ reg = <0 0x15000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ iommu: mmsys_iommu@10205000 {
+ compatible = "mediatek,mt7623-m4u",
+ "mediatek,mt2701-m4u";
+ reg = <0 0x10205000 0 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_M4U>;
+ clock-names = "bclk";
+ mediatek,larbs = <&larb0 &larb1 &larb2>;
+ #iommu-cells = <1>;
+ };
+
+ jpegdec: jpegdec@15004000 {
+ compatible = "mediatek,mt7623-jpgdec",
+ "mediatek,mt2701-jpgdec";
+ reg = <0 0x15004000 0 0x1000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
+ <&imgsys CLK_IMG_JPGDEC>;
+ clock-names = "jpgdec-smi",
+ "jpgdec";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+ mediatek,larb = <&larb2>;
+ iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+ <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+ };
+
+ smi_common: smi@1000c000 {
+ compatible = "mediatek,mt7623-smi-common",
+ "mediatek,mt2701-smi-common";
+ reg = <0 0x1000c000 0 0x1000>;
+ clocks = <&infracfg CLK_INFRA_SMI>,
+ <&mmsys CLK_MM_SMI_COMMON>,
+ <&infracfg CLK_INFRA_SMI>;
+ clock-names = "apb", "smi", "async";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+ };
+};
--
2.25.1
next prev parent reply other threads:[~2020-08-19 8:18 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-19 8:17 [PATCH v5 0/7] make hdmi work on bananapi-r2 Frank Wunderlich
2020-08-19 8:17 ` [PATCH v5 1/7] dt-bindings: mediatek: add mt7623 display-nodes Frank Wunderlich
2020-08-27 23:31 ` Chun-Kuang Hu
2020-08-19 8:17 ` [PATCH v5 2/7] drm/mediatek: add ddp routing for mt7623 Frank Wunderlich
2020-08-27 23:32 ` Chun-Kuang Hu
2020-08-19 8:17 ` [PATCH v5 3/7] drm/mediatek: disable tmds on mt2701 Frank Wunderlich
2020-08-19 17:12 ` Matthias Brugger
2020-08-19 19:04 ` Frank Wunderlich
2020-08-21 11:13 ` Aw: " Frank Wunderlich
2020-08-21 7:17 ` Aw: " Frank Wunderlich
2020-08-27 8:15 ` Matthias Brugger
2020-08-27 13:41 ` Aw: " Frank Wunderlich
2020-08-27 14:28 ` Matthias Brugger
2020-08-27 23:46 ` Chun-Kuang Hu
2020-08-28 5:21 ` Frank Wunderlich
2020-08-28 17:45 ` Matthias Brugger
2020-08-19 8:17 ` [PATCH v5 4/7] drm/mediatek: Add get_possible_crtc API for dpi, dsi Frank Wunderlich
2020-08-19 8:17 ` [PATCH v5 5/7] drm/mediatek: dpi/dsi: change the getting possible_crtc way Frank Wunderlich
2020-08-19 17:14 ` Matthias Brugger
2020-08-27 23:34 ` Chun-Kuang Hu
2020-08-19 8:17 ` Frank Wunderlich [this message]
2020-09-09 9:29 ` [PATCH v5 6/7] arm: dts: mt7623: move display nodes to separate mt7623n.dtsi Matthias Brugger
2020-09-09 9:35 ` Matthias Brugger
2020-08-19 8:17 ` [PATCH v5 7/7] arm: dts: mt7623: add display subsystem related device nodes Frank Wunderlich
2020-09-09 9:29 ` Matthias Brugger
2020-08-26 15:52 ` [PATCH v5 0/7] make hdmi work on bananapi-r2 Frank Wunderlich
2020-09-03 15:07 ` Frank Wunderlich
2020-09-03 22:54 ` Chun-Kuang Hu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200819081752.4805-7-linux@fw-web.de \
--to=linux@fw-web.de \
--cc=airlied@linux.ie \
--cc=chunkuang.hu@kernel.org \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=dwmw@amazon.co.uk \
--cc=frank-w@public-files.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=p.zabel@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).