linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: David Hildenbrand <david@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org, David Hildenbrand <david@redhat.com>,
	Michal Hocko <mhocko@suse.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Wei Yang <richard.weiyang@linux.alibaba.com>,
	Baoquan He <bhe@redhat.com>,
	Pankaj Gupta <pankaj.gupta.linux@gmail.com>,
	Oscar Salvador <osalvador@suse.de>,
	Charan Teja Reddy <charante@codeaurora.org>
Subject: [PATCH v2 10/10] mm/memory_hotplug: mark pageblocks MIGRATE_ISOLATE while onlining memory
Date: Wed, 19 Aug 2020 19:59:57 +0200	[thread overview]
Message-ID: <20200819175957.28465-11-david@redhat.com> (raw)
In-Reply-To: <20200819175957.28465-1-david@redhat.com>

Currently, it can happen that pages are allocated (and freed) via the buddy
before we finished basic memory onlining.

For example, pages are exposed to the buddy and can be allocated before
we actually mark the sections online. Allocated pages could suddenly
fail pfn_to_online_page() checks. We had similar issues with pcp
handling, when pages are allocated+freed before we reach
zone_pcp_update() in online_pages() [1].

Instead, mark all pageblocks MIGRATE_ISOLATE, such that allocations are
impossible. Once done with the heavy lifting, use
undo_isolate_page_range() to move the pages to the MIGRATE_MOVABLE
freelist, marking them ready for allocation. Similar to offline_pages(),
we have to manually adjust zone->nr_isolate_pageblock.

[1] https://lkml.kernel.org/r/1597150703-19003-1-git-send-email-charante@codeaurora.org

Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Charan Teja Reddy <charante@codeaurora.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
---
 mm/Kconfig          |  2 +-
 mm/memory_hotplug.c | 32 ++++++++++++++++++++++----------
 2 files changed, 23 insertions(+), 11 deletions(-)

diff --git a/mm/Kconfig b/mm/Kconfig
index 6c974888f86f9..85a16ce1dbc49 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -152,6 +152,7 @@ config HAVE_BOOTMEM_INFO_NODE
 # eventually, we can have this option just 'select SPARSEMEM'
 config MEMORY_HOTPLUG
 	bool "Allow for memory hot-add"
+	select MEMORY_ISOLATION
 	depends on SPARSEMEM || X86_64_ACPI_NUMA
 	depends on ARCH_ENABLE_MEMORY_HOTPLUG
 	depends on 64BIT || BROKEN
@@ -178,7 +179,6 @@ config MEMORY_HOTPLUG_DEFAULT_ONLINE
 
 config MEMORY_HOTREMOVE
 	bool "Allow for memory hot remove"
-	select MEMORY_ISOLATION
 	select HAVE_BOOTMEM_INFO_NODE if (X86_64 || PPC64)
 	depends on MEMORY_HOTPLUG && ARCH_ENABLE_MEMORY_HOTREMOVE
 	depends on MIGRATION
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 1c16a5def781e..35d56cbd3e45b 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -805,7 +805,7 @@ int __ref online_pages(unsigned long pfn, unsigned long nr_pages,
 
 	/* associate pfn range with the zone */
 	zone = zone_for_pfn_range(online_type, nid, pfn, nr_pages);
-	move_pfn_range_to_zone(zone, pfn, nr_pages, NULL, MIGRATE_MOVABLE);
+	move_pfn_range_to_zone(zone, pfn, nr_pages, NULL, MIGRATE_ISOLATE);
 
 	arg.start_pfn = pfn;
 	arg.nr_pages = nr_pages;
@@ -816,6 +816,14 @@ int __ref online_pages(unsigned long pfn, unsigned long nr_pages,
 	if (ret)
 		goto failed_addition;
 
+	/*
+	 * Fixup the number of isolated pageblocks before marking the sections
+	 * onlining, such that undo_isolate_page_range() works correctly.
+	 */
+	spin_lock_irqsave(&zone->lock, flags);
+	zone->nr_isolate_pageblock += nr_pages / pageblock_nr_pages;
+	spin_unlock_irqrestore(&zone->lock, flags);
+
 	/*
 	 * If this zone is not populated, then it is not in zonelist.
 	 * This means the page allocator ignores this zone.
@@ -833,21 +841,25 @@ int __ref online_pages(unsigned long pfn, unsigned long nr_pages,
 	zone->zone_pgdat->node_present_pages += nr_pages;
 	pgdat_resize_unlock(zone->zone_pgdat, &flags);
 
+	node_states_set_node(nid, &arg);
+	if (need_zonelists_rebuild)
+		build_all_zonelists(NULL);
+	zone_pcp_update(zone);
+
+	/* Basic onlining is complete, allow allocation of onlined pages. */
+	undo_isolate_page_range(pfn, pfn + nr_pages, MIGRATE_MOVABLE);
+
 	/*
 	 * When exposing larger, physically contiguous memory areas to the
 	 * buddy, shuffling in the buddy (when freeing onlined pages, putting
 	 * them either to the head or the tail of the freelist) is only helpful
 	 * for maintaining the shuffle, but not for creating the initial
 	 * shuffle. Shuffle the whole zone to make sure the just onlined pages
-	 * are properly distributed across the whole freelist.
+	 * are properly distributed across the whole freelist. Make sure to
+	 * shuffle once pageblocks are no longer isolated.
 	 */
 	shuffle_zone(zone);
 
-	node_states_set_node(nid, &arg);
-	if (need_zonelists_rebuild)
-		build_all_zonelists(NULL);
-	zone_pcp_update(zone);
-
 	init_per_zone_wmark_min();
 
 	kswapd_run(nid);
@@ -1550,9 +1562,9 @@ int __ref offline_pages(unsigned long start_pfn, unsigned long nr_pages)
 	pr_info("Offlined Pages %ld\n", nr_pages);
 
 	/*
-	 * Onlining will reset pagetype flags and makes migrate type
-	 * MOVABLE, so just need to decrease the number of isolated
-	 * pageblocks zone counter here.
+	 * The memory sections are marked offline, and the pageblock flags
+	 * effectively stale; nobody should be touching them. Fixup the number
+	 * of isolated pageblocks, memory onlining will properly revert this.
 	 */
 	spin_lock_irqsave(&zone->lock, flags);
 	zone->nr_isolate_pageblock -= nr_pages / pageblock_nr_pages;
-- 
2.26.2


  parent reply	other threads:[~2020-08-19 18:02 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-19 17:59 [PATCH v2 00/10] mm/memory_hotplug: online_pages()/offline_pages() cleanups David Hildenbrand
2020-08-19 17:59 ` [PATCH v2 01/10] mm/memory_hotplug: inline __offline_pages() into offline_pages() David Hildenbrand
2020-08-24 10:26   ` Oscar Salvador
2020-08-31 10:05   ` Pankaj Gupta
2020-08-19 17:59 ` [PATCH v2 02/10] mm/memory_hotplug: enforce section granularity when onlining/offlining David Hildenbrand
2020-08-24 10:39   ` Oscar Salvador
2020-08-25  2:11     ` Wei Yang
2020-09-08  9:14       ` David Hildenbrand
2020-08-19 17:59 ` [PATCH v2 03/10] mm/memory_hotplug: simplify page offlining David Hildenbrand
2020-08-24 10:44   ` Oscar Salvador
2020-09-03 21:58   ` Andrew Morton
2020-09-04  5:47     ` David Hildenbrand
2020-09-04  7:46       ` Michal Hocko
2020-09-04 19:21       ` Andrew Morton
2020-09-07  6:45         ` Michal Hocko
2020-09-08  9:10           ` David Hildenbrand
2020-08-19 17:59 ` [PATCH v2 04/10] mm/page_alloc: simplify __offline_isolated_pages() David Hildenbrand
2020-08-24 10:48   ` Oscar Salvador
2020-08-19 17:59 ` [PATCH v2 05/10] mm/memory_hotplug: drop nr_isolate_pageblock in offline_pages() David Hildenbrand
2020-08-24 10:49   ` Oscar Salvador
2020-08-19 17:59 ` [PATCH v2 06/10] mm/page_isolation: simplify return value of start_isolate_page_range() David Hildenbrand
2020-08-24 10:51   ` Oscar Salvador
2020-08-19 17:59 ` [PATCH v2 07/10] mm/memory_hotplug: simplify page onlining David Hildenbrand
2020-08-24 10:55   ` Oscar Salvador
2020-08-19 17:59 ` [PATCH v2 08/10] mm/page_alloc: drop stale pageblock comment in memmap_init_zone*() David Hildenbrand
2020-08-24 10:58   ` Oscar Salvador
2020-08-19 17:59 ` [PATCH v2 09/10] mm: pass migratetype into memmap_init_zone() and move_pfn_range_to_zone() David Hildenbrand
2020-08-24 11:59   ` Oscar Salvador
2020-08-19 17:59 ` David Hildenbrand [this message]
2020-08-24 12:07   ` [PATCH v2 10/10] mm/memory_hotplug: mark pageblocks MIGRATE_ISOLATE while onlining memory Oscar Salvador

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200819175957.28465-11-david@redhat.com \
    --to=david@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=bhe@redhat.com \
    --cc=charante@codeaurora.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@suse.com \
    --cc=osalvador@suse.de \
    --cc=pankaj.gupta.linux@gmail.com \
    --cc=richard.weiyang@linux.alibaba.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).