From: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Saravanan Sekar <sravanhome@gmail.com>
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH v3 4/4] dt-bindings: regulator: Convert mp886x to json-schema
Date: Thu, 20 Aug 2020 17:12:32 +0800 [thread overview]
Message-ID: <20200820171232.1fede9bc@xhacker.debian> (raw)
In-Reply-To: <20200820171020.5df4683b@xhacker.debian>
Convert the mp886x binding to DT schema format using json-schema.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
---
.../devicetree/bindings/regulator/mp886x.txt | 31 ----------
.../bindings/regulator/mps,mp886x.yaml | 61 +++++++++++++++++++
2 files changed, 61 insertions(+), 31 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/regulator/mp886x.txt
create mode 100644 Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
diff --git a/Documentation/devicetree/bindings/regulator/mp886x.txt b/Documentation/devicetree/bindings/regulator/mp886x.txt
deleted file mode 100644
index b05307bbb0d9..000000000000
--- a/Documentation/devicetree/bindings/regulator/mp886x.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Monolithic Power Systems MP8867/MP8869 voltage regulator
-
-Required properties:
-- compatible: Must be one of the following.
- "mps,mp8867"
- "mps,mp8869"
-- reg: I2C slave address.
-- enable-gpios: enable gpios.
-- mps,fb-voltage-divider: An array of two integers containing the resistor
- values R1 and R2 of the feedback voltage divider in kilo ohms.
-
-Optional properties:
-- mps,switch-frequency-hz: The valid switch frequency in Hertz. Available values
- are: 500000, 750000, 1000000, 1250000, 1500000
-
-Any property defined as part of the core regulator binding, defined in
-./regulator.txt, can also be used.
-
-Example:
-
- vcpu: regulator@62 {
- compatible = "mps,mp8869";
- regulator-name = "vcpu";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <850000>;
- regulator-always-on;
- regulator-boot-on;
- enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>;
- mps,fb-voltage-divider = <80 240>;
- reg = <0x62>;
- };
diff --git a/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
new file mode 100644
index 000000000000..ba175b30f468
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mps,mp886x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Monolithic Power Systems MP8867/MP8869 voltage regulator
+
+maintainers:
+ - Jisheng Zhang <jszhang@kernel.org>
+
+allOf:
+ - $ref: regulator.yaml#
+
+properties:
+ compatible:
+ enum:
+ - mps,mp8867
+ - mps,mp8869
+
+ reg:
+ maxItems: 1
+
+ enable-gpios:
+ description: GPIO to enable/disable the regulator.
+ maxItems: 1
+
+ mps,fb-voltage-divider:
+ description: An array of two integers containing the resistor
+ values R1 and R2 of the feedback voltage divider in kilo ohms.
+ $ref: "/schemas/types.yaml#/definitions/uint32-array"
+ maxItems: 2
+
+ mps,switch-frequency-hz:
+ description: The valid switch frequency in Hertz.
+ enum: [500000, 750000, 1000000, 1250000, 1500000]
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+ - mps,fb-voltage-divider
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ regulator@62 {
+ compatible = "mps,mp8869";
+ regulator-name = "vcpu";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1150000>;
+ enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>;
+ mps,fb-voltage-divider = <80 240>;
+ reg = <0x62>;
+ };
+ };
+
+...
--
2.28.0
prev parent reply other threads:[~2020-08-20 9:17 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-20 9:10 [PATCH v3 0/4] regulator: mp886x: two features and dt json convert Jisheng Zhang
2020-08-20 9:10 ` [PATCH v3 1/4] regulator: mp886x: implement set_ramp_delay Jisheng Zhang
2020-08-20 21:05 ` Mark Brown
2020-08-21 2:17 ` Jisheng Zhang
2020-08-21 9:57 ` Mark Brown
2020-08-20 9:11 ` [PATCH v3 2/4] dt-bindings: regulator: mp886x: support mps,switch-frequency-hz Jisheng Zhang
2020-08-20 9:11 ` [PATCH v3 3/4] regulator: mp886x: support setting switch freq Jisheng Zhang
2020-08-20 9:12 ` Jisheng Zhang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200820171232.1fede9bc@xhacker.debian \
--to=jisheng.zhang@synaptics.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sravanhome@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).